Cisco Nexus 7000 Series Multicast Routing Command Reference

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Cisco Nexus 7000 Series Multicast Routing Command Reference

Chapter Title

R Commands

Results

Updated:
April 5, 2016

Chapter: R Commands

R Commands

restart msdp

To restart the Multicast Source Discovery Protocol (MSDP) process, use the restart msdp command.

restart msdp

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes


Any command mode

Supported User Roles

network-admin

network-operator

vdc-admin

vdc-operator

Command History

Release

Modification

4.0(1)

This command was introduced.

Usage Guidelines

This command requires the Enterprise Services license.

Examples

This example shows how to restart the MSDP process: 


switch(config)# restart msdp

Related Commands

Command

Description

ip msdp flush-routes

Enables flushing routes when the MSDP process is restarted.

restart pim

To restart the IPv4 Protocol Independent Multicast (PIM) process, use the restart pim command.

restart pim

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes


Any command mode

Supported User Roles

network-admin

network-operator

vdc-admin

vdc-operator

Command History

Release

Modification

4.0(1)

This command was introduced.

Usage Guidelines

This command requires the Enterprise Services license.

Examples

This example shows how to restart the PIM process: 


switch(config)# restart pim

Related Commands

Command

Description

ip pim flush-routes

Enables flushing routes when the PIM process is restarted.

restart pim6

To restart the IPv6 Protocol Independent Multicast (PIM6) process, use the restart pim6 command.

restart pim6

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes


Any command mode

Supported User Roles

network-admin

network-operator

vdc-admin

vdc-operator

Command History

Release

Modification

4.0(1)

This command was introduced.

Usage Guidelines

This command requires the Enterprise Services license.

Examples

This example shows how to restart the PIM6 process: 


switch(config)# restart pim6

Related Commands

Command

Description

ipv6 pim flush-routes

Enables flushing routes when the PIM6 process is restarted.

restart igmp

To restart the IGMP process, use the restart igmp command.

restart igmp

Syntax Description

This command has no arguments or keywords.

Command Default

None

Command Modes


Any command mode

Supported User Roles

network-admin

network-operator

vdc-admin

vdc-operator

Command History

Release

Modification

4.0(1)

This command was introduced.

Usage Guidelines

This command does not require a license.

Examples

This example shows how to restart the process: 


switch(config)# restart igmp

Related Commands

Command

Description

ip igmp flush-routes

Enables flushing routes when the IGMP process is restarted.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco