F Commands

feature pim6

To enable the Protocol Independent Multicast (PIM) for IPv6 feature, use the feature pim6 command. To disable this feature, use the no form of this command.

feature pim6

no feature pim6

Syntax Description

This command has no arguments or keywords.

Command Default

Disabled

Command Modes


Global configuration mode

Supported User Roles

network-admin

vdc-admin

Command History

Release

Modification

4.0(1)

This command was introduced.

Usage Guidelines

This command requires the Enterprise Services License.

Examples

The example shows how to enable the PIM for IPv6: 


switch(config)# feature pim6
switch(config)#

Related Commands

Command

Description

show ip msdp summary

Displays the summary of MSDP peers.

feature msdp

To enable the Multicast Source Discovery Protocol (MSDP) feature, use the feature msdp command. To disable this feature, use the no form of this command.

feature msdp

no feature msdp

Syntax Description

This command has no arguments or keywords.

Command Default

Disabled

Command Modes


Global configuration mode

Supported User Roles

network-admin

vdc-admin

Command History

Release

Modification

4.0(1)

This command was introduced.

Usage Guidelines

This command requires the Enterprise Services License.

Examples

This example shows how to enable the MSDP feature: 


switch(config)# feature msdp
switch(config)#

Related Commands

Command

Description

show ip pim vrf

Displays the per VRF information.

feature pim

To enable the Protocol Independent Multicast (PIM) feature, use the feature pim command. To disable this feature, use the no form of this command.

feature pim

no feature pim

Syntax Description

This command has no arguments or keywords.

Command Default

Disabled

Command Modes


Global configuration mode

Supported User Roles

network-admin

vdc-admin

Command History

Release

Modification

4.0(1)

This command was introduced.

Usage Guidelines

This command requires the Enterprise Services License.

Examples

This example shows how to enable the PIM: 


switch(config)# feature pim
switch(config)#

Related Commands

Command

Description

show ip pim route

Displays the PIM route specific information.