L Commands

l2rib dup-host-mac-detection

{ no l2rib dup-host-mac-detection } | { l2rib dup-host-mac-detection <num-of-moves> <duration> }

Syntax Description

no

Negate a command or set its defaults

l2rib

Layer 2 routing information base

dup-host-mac-detection

Set Duplicate-Host-MAC-Detection parameters

num-of-moves

Number of host moves to be allowed

duration

Duplicate detection timeout in secs for host moves

Command Mode

  • /exec/configure

l2rib dup-host-mac-recovery

{ no l2rib dup-host-mac-recovery } | { l2rib dup-host-mac-recovery <timeout> <retry-count> }

Syntax Description

no

Negate a command or set its defaults

l2rib

Layer 2 routing information base

dup-host-mac-recovery

Set Duplicate-Host-MAC-Recovery (Unfreeze) parameters

timeout

Unfreeze timeout (secs)

retry-count

Unfreeze retry count

Command Mode

  • /exec/configure

l2rib event-history size

l2rib event-history { client-tbl | ead-pl | errors | mac | mac-ip | misc-obj | rmac | topology | tx-infra | server } size { default | medium | high | very-high }

Syntax Description

l2rib

Layer 2 routing information base

event-history

Set event-history size for L2RIB

client-tbl

L2RIB Client, Producer, Consumer Tables Event Logs

ead-pl

L2RIB EAD, Path-List Objects Event Logs

errors

L2RIB Error Logs

mac

L2RIB MAC Object Event Logs

mac-ip

L2RIB MAC Object Event Logs

misc-obj

L2RIB IMET, Flood-List, ARP-Signal, Peer ID, Startup-Routes Objects Event Logs

rmac

L2RIB Router MAC Object Event Logs

topology

L2RIB Topology Object Event Logs

tx-infra

L2RIB TxList, TxSend, TxThread Event Logs

server

L2RIB Sysmgr, PSS, HA Logs

size

Size

default

Default (Low)

medium

Medium

high

High

very-high

Very High

Command Mode

  • /exec/configure

l3vm event-history

[no] l3vm event-history { pss | errors | mts | reinit | cli | vrf | topology } { size { <size_in_text> | <size_in_Kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

l3vm

Debug L3VM information

event-history

log debug events into event history buffer

pss

L3VM pss operation

errors

L3VM errors

mts

L3VM MTS messages

reinit

L3VM reinit events

cli

Log L3VM CLI related events

vrf

Log VRF related events

topology

Log Topology related events

size

Configure the size of the event-hist buffer

size_in_text

Buffer size

size_in_Kbytes

Size of the file in kbytes

Command Mode

  • /exec

label-allocation-mode per-vrf

[no] label-allocation-mode per-vrf

Syntax Description

no

(Optional) Negate a command or set its defaults

label-allocation-mode

Configure label allocation mode

per-vrf

per VRF label allocation mode

Command Mode

  • /exec/configure/router-bgp/router-bgp-vrf-af-ipv4 /exec/configure/router-bgp/router-bgp-vrf-af-ipv6

label allocate global

[no] label allocate global { all-routes | host-routes | prefix-list <pfx-list> }

Syntax Description

no

(Optional) Negate a command or set its defaults

label

LDP label configuration

allocate

Allocate local labels

global

Specify default VPN Routing/Forwarding instance

all-routes

Allocate local labels for all routes

host-routes

Allocate local labels for host routes only (default)

prefix-list

Specify a prefix-list for local label filtering

pfx-list

IP prefix-list for destination prefixes

Command Mode

  • /exec/configure/ldp

lacp fast-select-hot-standby

lacp fast-select-hot-standby | no lacp fast-select-hot-standby

Syntax Description

no

Negate a command or set its defaults

lacp

Set LACP parameters for the interface

fast-select-hot-standby

Configure fast select for hot standby ports. Enabling this feature will allow fast selection of hot standby port when last active port in the port-channel is going down.

Command Mode

  • /exec/configure/if-eth-port-channel-switch /exec/configure/if-eth-port-channel /exec/configure/if-eth-port-channel-p2p

lacp mode delay

[no] lacp mode delay

Syntax Description

no

(Optional) Negate a command or set its defaults

lacp

Set LACP parameters for the interface

mode

Enter the LACP mode

delay

Configure delayed lacp on the port-channel

Command Mode

  • /exec/configure/if-eth-port-channel-switch /exec/configure/if-eth-port-channel /exec/configure/if-eth-port-channel-p2p

lacp port-priority

lacp port-priority <port-pri> | no lacp port-priority

Syntax Description

no

Negate a command or set its defaults

lacp

Set LACP parameters for the interface

port-priority

Set LACP port priority

port-pri

Enter port priority

Command Mode

  • /exec/configure/if-eth-base /exec/configure/if-ethernet-all

lacp rapid-transition

lacp rapid-transition | no lacp rapid-transition

Syntax Description

no

Negate a command or set its defaults

lacp

Set LACP parameters for the interface

rapid-transition

Optimizes LACP timers for rapid transition from P->I, I->P state

Command Mode

  • /exec/configure

lacp rate

[no] lacp rate

Syntax Description

no

Negate a command or set its defaults

lacp

Set LACP parameters for the interface

rate

Configure rate at which PDUs are sent by LACP

Command Mode

  • /exec/configure/if-ethernet /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-all /exec/configure/if-ethernet-m /exec/configure/if-ethernet-switch-m /exec/configure/if-remote-ethernet /exec/configure/if-remote-ethernet-switch

lacp rate

lacp rate <rate_type>

Syntax Description

lacp

Set LACP parameters for the interface

rate

Configure rate at which PDUs are sent by LACP

rate_type

Rate type

Command Mode

  • /exec/configure/if-ethernet /exec/configure/if-ethernet-switch /exec/configure/if-ethernet-all /exec/configure/if-ethernet-m /exec/configure/if-ethernet-switch-m /exec/configure/if-remote-ethernet /exec/configure/if-remote-ethernet-switch

lacp system-mac

lacp system-mac <mac-address> [ role <role> ] | no lacp system-mac

Syntax Description

no

Negate a command or set its defaults

lacp

Set LACP parameters for the interface

system-mac

Configure the MAC address to be used for the LACP Protocol exchanges

mac-address

MAC-address(FORMAT :xxxx.xxxx.xxxx)

role

(Optional) Configure the role for this Switch

role

(Optional) Role played by the Switch

Command Mode

  • /exec/configure

lacp system-priority

lacp system-priority <sys-pri> | no lacp system-priority

Syntax Description

no

Negate a command or set its defaults

lacp

Set LACP parameters for the interface

system-priority

Set LACP system priority

sys-pri

Enter System Priority

Command Mode

  • /exec/configure

last

| last [ <lines> ]

Syntax Description

|

Pipe command output to filter

last

Display last lines

lines

(Optional) number of lines to print

Command Mode

  • /output

layer-2 multicast lookup mac

[no] layer-2 multicast lookup mac

Syntax Description

no

(Optional) Negate a command or set its defaults

layer-2

set layer2 multicast lkup mode

multicast

set layer2 multicast lkup mode

lookup

lkup type can be either mac or ip based

mac

set mac based multicast lkup mode

Command Mode

  • /exec/configure/vlan-config /exec/configure/bdomain

layer-2 multicast lookup mac

[no] layer-2 multicast lookup mac

Syntax Description

no

(Optional) Negate a command or set its defaults

layer-2

set layer2 multicast lkup mode

multicast

set layer2 multicast lkup mode

lookup

lkup type can be either mac or ip based

mac

set mac based multicast lkup mode

Command Mode

  • /exec/configure/vlan

layer-2 multicast lookup mac

[no] layer-2 multicast lookup mac

Syntax Description

no

(Optional) Negate a command or set its defaults

layer-2

set layer2 multicast lkup mode

multicast

set layer2 multicast lkup mode

lookup

lkup type can be either mac or ip based

mac

set mac based multicast lkup mode

Command Mode

  • /exec/configure

layer2-switched flow monitor input

[no] layer2-switched flow monitor <monitorname> input

Syntax Description

layer2-switched

Configure L2 features

flow

NetFlow related commands

monitor

Apply a Flow Monitor to this interface

monitorname

Name of Flow Monitor

input

Apply Flow Monitor on input traffic

Command Mode

  • /exec/configure/if-switching

layer3 peer-router

layer3 peer-router | no layer3 peer-router

Syntax Description

no

Negate a command or set its defaults

layer3

Enable layer 3 functionality

peer-router

no change for TTL of packets destined to the peer

Command Mode

  • /exec/configure/vpc-domain

ldap-search-map

ldap-search-map <s0>

Syntax Description

ldap-search-map

Set one of the configured search-map as active

s0

Name of the search-map

Command Mode

  • /exec/configure/ldap

ldap-search-map

[no] ldap-search-map

Syntax Description

no

Negate a command or set its defaults

ldap-search-map

Set one of the configured search-map as active

Command Mode

  • /exec/configure/ldap

ldap-server deadtime

[no] ldap-server deadtime <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

ldap-server

Configure LDAP related parameters

deadtime

Global LDAP server deadtime period in seconds

i0

LDAP server deadtime period in minutes (default 0 mins -disabled)

Command Mode

  • /exec/configure

ldap-server host

[no] ldap-server host { <hostipname> } [ { enable-ssl | port <i1> [ timeout <i2> ] | rootDN <s0> [ password { 7 <s1> { { [ port1 <i3> [ timeout1 <i4> ] ] } | { [ timeout5 <i9> ] } } | <s2> { { [ port2 <i5> [ timeout2 <i6> ] ] } | { [ timeout4 <i8> ] } } } ] | timeout3 <i7> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ldap-server

Configure LDAP related parameters

host

LDAP server's DNS name or IP address

hostipname

IPV4/IPV6 address or DNS name

enable-ssl

(Optional) LDAP server enable ssl

port

(Optional) LDAP server's port (default: global config)

i1

(Optional) port number

timeout

(Optional) LDAP server timeout period in seconds

i2

(Optional) LDAP server timeout in seconds (default: global config)

rootDN

(Optional) LDAP server root DN

s0

(Optional) root DN

password

(Optional) LDAP server root password

7

(Optional) LDAP root password (encrypted)

s1

(Optional) password (encrypted)

port1

(Optional) LDAP server's port (default: global config)

i3

(Optional) port number

timeout1

(Optional) LDAP server timeout period in seconds

i4

(Optional) LDAP server timeout in seconds (default: global config)

s2

(Optional) password (clear text)

port2

(Optional) LDAP server's port (default: global config)

i5

(Optional) port number

timeout2

(Optional) LDAP server timeout period in seconds

i6

(Optional) LDAP server timeout in seconds (default: global config)

timeout3

(Optional) LDAP server timeout period in seconds

i7

(Optional) LDAP server timeout in seconds (default: global config)

timeout4

(Optional) LDAP server timeout period in seconds

i8

(Optional) LDAP server timeout in seconds (default: global config)

timeout5

(Optional) LDAP server timeout period in seconds

i9

(Optional) LDAP server timeout in seconds (default: global config)

Command Mode

  • /exec/configure

ldap-server host test rootDN

[no] ldap-server host { <hostipname> } test rootDN <r1> { { [ username <s0> { [ password { [ 7 <s2> | <s1> ] } [ idle-time <i1> ] ] | [ idle-time <i1> ] } ] } | { [ password { [ 7 <s2> | <s1> ] } [ idle-time <i1> ] ] } | { [ idle-time <i1> ] } }

Syntax Description

username

(Optional) <s0>

no

(Optional) Negate a command or set its defaults

ldap-server

Configure LDAP related parameters

host

LDAP server's IP address

hostipname

IPV4/IPV6 address or DNS name

test

Parameters to send test packets

7

(Optional) LDAP test password (encrypted)

s0

(Optional) user name

password

(Optional) user password in test packets

s1

(Optional) test password

s2

(Optional) test password (encrypted)

rootDN

rootDN in test packets

r1

root DN

idle-time

(Optional) time interval for monitoring the server

i1

(Optional) time period in minutes

Command Mode

  • /exec/configure

ldap-server port

[no] ldap-server port <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

ldap-server

Configure LDAP related parameters

port

Global LDAP server's port (default 389)

i0

port number

Command Mode

  • /exec/configure

ldap-server timeout

[no] ldap-server timeout <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

ldap-server

Configure LDAP related parameters

timeout

Global LDAP server timeout period in seconds

i0

LDAP server timeout period in seconds (default 5 sec)

Command Mode

  • /exec/configure

ldap search-map

[no] ldap search-map <s0>

Syntax Description

no

(Optional) Negate a command or set its defaults

ldap

Configure information about ldap

search-map

Configure the search-map

s0

Search Map Name

Command Mode

  • /exec/configure

less

| less [ -d | -E ] +

Syntax Description

|

Pipe command output to filter

less

Filter for paging

-d

(Optional) dumb terminal

-E

(Optional) quit at end of file

Command Mode

  • /output

license expiry check_interval

license expiry check_interval <i0>

Syntax Description

license

Enter the license configuration mode

expiry

Configure the expiry check interval

check_interval

Configure the expiry check interval

i0

Specify the license expiry check interval in seconds

Command Mode

  • /exec

license reserve count package module

[no] license reserve count <i0> package <license-feature> module <i1>

Syntax Description

no

(Optional) Negate a command or set its defaults

license

Display licensing information

reserve

Reserve the licenses for the specified module

count

Count of licenses to reserve

i0

Count of licenses

package

Name of the license package to reserve

license-feature

Name of the license package

module

Module number

i1

Module number

Command Mode

  • /exec/configure

limit-resource m4route-mem maximum equal-to-min

{ limit-resource m4route-mem [ minimum { <min> | <min-hi> } ] maximum { <max-lo> | <max> | <max-hi> | equal-to-min } } | { no limit-resource m4route-mem [ [ minimum { <min> | <min-hi> } ] maximum { <max-lo> | <max> | <max-hi> | equal-to-min } ] }

Syntax Description

no

Negate a command or set its defaults

limit-resource

Resource configuration

m4route-mem

set ipv4 route memory limits

minimum

(Optional) minimum route memory to allocate

min

(Optional) minimum route memory value

min-hi

(Optional) minimum route memory value

maximum

maximum route memory to allocate

max-lo

maximum route memory value

max

maximum route memory value

max-hi

maximum route memory value

equal-to-min

maximum value equal to min

Command Mode

  • /exec/configure/vdc-template /exec/configure/vdc

limit-resource m6route-mem maximum

{ limit-resource m6route-mem [ minimum { <min> | <min-hi> } ] maximum { <max-lo> | <max> | <max-hi> } } | { no limit-resource m6route-mem [ [ minimum { <min> | <min-hi> } ] maximum { <max-lo> | <max> | <max-hi> } ] }

Syntax Description

no

Negate a command or set its defaults

limit-resource

Resource configuration

m6route-mem

set ipv6 route memory limits

minimum

(Optional) minimum route memory to allocate

min

(Optional) minimum route memory value

min-hi

(Optional) minimum route memory value

maximum

maximum route memory to allocate

max-lo

maximum route memory value

max

maximum route memory value

max-hi

maximum route memory value

Command Mode

  • /exec/configure/vdc-template /exec/configure/vdc

limit-resource module-type

{ limit-resource module-type <card-type> + } | { no limit-resource module-type }

Syntax Description

no

Negate a command or set its defaults

limit-resource

Resource configuration

module-type

Controls which type of modules are allowed in this vdc

card-type

Allowed module types

Command Mode

  • /exec/configure/vdc

limit-resource monitor-session-erspan-dst minimum maximum equal-to-min

{ limit-resource monitor-session-erspan-dst minimum <min-val> maximum { <max-val> | equal-to-min } } | { no limit-resource monitor-session-erspan-dst [ minimum <min-val> maximum { <max-val> | equal-to-min } ] }

Syntax Description

limit-resource

Resource configuration

monitor-session-erspan-dst

Monitor erspan destination session

minimum

minimum monitor erspan-dst session to allocate

min-val

minimum monitor erspan-dst session value

maximum

maximum monitor erspan-dst session to allocate

max-val

maximum monitor erspan-dst session value

equal-to-min

set maximum value equal to min

Command Mode

  • /exec/configure/vdc-template /exec/configure/vdc

limit-resource monitor-session-inband-src minimum maximum equal-to-min

{ limit-resource monitor-session-inband-src minimum <min-val> maximum { <max-val> | equal-to-min } } | { no limit-resource monitor-session-inband-src [ minimum <min-val> maximum { <max-val> | equal-to-min } ] }

Syntax Description

limit-resource

Resource configuration

monitor-session-inband-src

Monitor inband source

minimum

minimum monitor inband source to allocate

min-val

minimum monitor inband source value

maximum

maximum monitor inband source to allocate

max-val

maximum monitor inband source value

equal-to-min

set maximum value equal to min

Command Mode

  • /exec/configure/vdc-template /exec/configure/vdc

limit-resource monitor-session minimum maximum equal-to-min

{ limit-resource monitor-session minimum <min-val> maximum { <max-val> | equal-to-min } } | { no limit-resource monitor-session [ minimum <min-val> maximum { <max-val> | equal-to-min } ] }

Syntax Description

limit-resource

Resource configuration

monitor-session

Monitor local/erspan-source session

minimum

minimum monitor local session to allocate

min-val

minimum monitor local session value

maximum

maximum monitor local session to allocate

max-val

maximum monitor local session value

equal-to-min

set maximum value equal to min

Command Mode

  • /exec/configure/vdc-template /exec/configure/vdc

limit-resource port-channel minimum maximum

limit-resource port-channel minimum <min-val> maximum { <max-val> | equal-to-min } | no limit-resource port-channel [ minimum <min-val> maximum { <max-val> | equal-to-min } ]

Syntax Description

no

Negate a command or set its defaults

limit-resource

Resource configuration

port-channel

set port-channel limits

minimum

minimum port-channels to allocate

min-val

maximum

maximum port-channels to allocate

max-val

equal-to-min

set maximum value equal to min

Command Mode

  • /exec/configure/vdc-template /exec/configure/vdc

limit-resource u4route-mem maximum equal-to-min

{ limit-resource u4route-mem [ minimum { <min-lo> | <min> | <min-hi> } ] maximum { <max-lo> | <max> | <max-hi> | equal-to-min } } | { no limit-resource u4route-mem [ [ minimum { <min-lo> | <min> | <min-hi> } ] maximum { <max-lo> | <max> | <max-hi> | equal-to-min } ] }

Syntax Description

no

Negate a command or set its defaults

limit-resource

Resource configuration

u4route-mem

set ipv4 route memory limits

minimum

(Optional) minimum route memory to allocate

min-lo

(Optional) minimum route memory value

min

(Optional) minimum route memory value

min-hi

(Optional) minimum route memory value

maximum

maximum route memory to allocate

max-lo

maximum route memory value

max

maximum route memory value

max-hi

maximum route memory value

equal-to-min

maximum value equal to min

Command Mode

  • /exec/configure/vdc-template /exec/configure/vdc

limit-resource u6route-mem maximum equal-to-min

{ limit-resource u6route-mem [ minimum { <min-lo> | <min> | <min-hi> } ] maximum { <max-lo> | <max> | <max-hi> | equal-to-min } } | { no limit-resource u6route-mem [ [ minimum { <min-lo> | <min> | <min-hi> } ] maximum { <max-lo> | <max> | <max-hi> | equal-to-min } ] }

Syntax Description

no

Negate a command or set its defaults

limit-resource

Resource configuration

u6route-mem

set ipv6 route memory limits

minimum

(Optional) minimum route memory to allocate

min-lo

(Optional) minimum route memory value

min

(Optional) minimum route memory value

min

(Optional) minimum route memory value

min-hi

(Optional) minimum route memory value

maximum

maximum route memory to allocate

max-lo

maximum route memory value

max

maximum route memory value

max-hi

maximum route memory value

equal-to-min

maximum value equal to min

Command Mode

  • /exec/configure/vdc-template /exec/configure/vdc

limit-resource vlan minimum maximum equal-to-min

{ limit-resource vlan minimum <min-val> maximum { <max-val> | equal-to-min } } | { no limit-resource vlan [ minimum <min-val> maximum { <max-val> | equal-to-min } ] }

Syntax Description

no

Negate a command or set its defaults

limit-resource

Resource configuration

vlan

set VLAN limits

minimum

minimum VLANs to allocate

min-val

minimum VLANs value

maximum

maximum VLANs to allocate

max-val

maximum VLANs value

equal-to-min

set maximum value equal to min

Command Mode

  • /exec/configure/vdc-template /exec/configure/vdc

limit-resource vrf minimum maximum equal-to-min

{ limit-resource vrf minimum <number1> maximum { <number2> | equal-to-min } } | { no limit-resource vrf [ minimum <number1> maximum { <number2> | equal-to-min } ] }

Syntax Description

no

Negate a command or set its defaults

limit-resource

Resource configuration

vrf

set vrf resource limits

minimum

minimum vrf resources to allocate

number1

minimum vrf resource value

maximum

maximum vrf resources to allocate

number2

maximum vrf resource value

equal-to-min

set maximum value equal to min

Command Mode

  • /exec/configure/vdc-template /exec/configure/vdc

limit address-count

[no] limit address-count <addr_count>

Syntax Description

no

(Optional) Negate a command or set its defaults

addr_count

maximum value

Command Mode

  • /exec/configure/config-snoop-policy

line console

[no] line console

Syntax Description

no

(Optional) Negate a command or set its defaults

line

Configure a terminal line

console

Primary terminal line

Command Mode

  • /exec/configure

line console

[no] line console

Syntax Description

no

(Optional) Negate a command or set its defaults

line

Configure a terminal line

console

Primary terminal line

Command Mode

  • /exec/configure

line vty

line vty

Syntax Description

line

Configure a terminal line

vty

Virtual terminal line

Command Mode

  • /exec/configure

line vty

[no] line vty

Syntax Description

no

Negate a command or set its defaults

line

Configure a terminal line

vty

Virtual terminal line

Command Mode

  • /exec/configure

link-management timers bandwidth

[no] link-management timers { bandwidth-hold | periodic-flooding } | link-management timers { bandwidth-hold <bw_seconds> | periodic-flooding <flood_seconds> }

Syntax Description

no

Negate a command or set its defaults

link-management

Link Management configuration

timers

Link Management timers configuration

bandwidth-hold

Link Management bandwidth hold timer

bw_seconds

seconds

periodic-flooding

Link Management periodic flooding interval

flood_seconds

seconds [0 to disable, minimum set to 30]

Command Mode

  • /exec/configure/te

link debounce

link debounce { [ link-up [ time <time_val_link_up> ] ] | [ time <time_val> ] } | no link debounce [ link-up ]

Syntax Description

no

Negate a command or set its defaults

link

Configure link

debounce

Configure link debounce timer

time

(Optional) Link debounce time

time_val

(Optional) Timer value (in milliseconds)

time_val_link_up

(Optional) Timer value (in milliseconds)

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-eth-base

link rxlos

link rxlos [ algo <algo_val> ] | no link rxlos [ algo <algo_val> ]

Syntax Description

no

Negate a command or set its defaults

link

Configure link

rxlos

Configure link rxlos algo

algo

(Optional) Link rxlos algo control

algo_val

(Optional) rxlos control options

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-eth-base /exec/configure/if-sub

lisp

{ lisp-lig | lig } { version | self | self6 | <hostname> | { <eid> | <eid6> } } [ source { <seid> | <seid6> } ] [ to { <mr-hostname> | { <mr> | <mr6> } } ] [ count <count> ] [ probe ] [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

lisp-lig

LISP Internet Groper

lig

LISP Internet Groper

eid

LIG on a IPv4 Endpoint ID (EID)

version

Display Internet Draft version lig supports

self

Test if IPv4 EID-prefix registered in mapping database

self6

Test if IPv6 EID-prefix registered in mapping database

hostname

DNS name for Endpoint ID (EID)

source

(Optional) Provide source EID for Map-Request

seid

(Optional) Source IPv4 Endpoint ID (EID)

to

(Optional) Where to send the Map-Request

mr-hostname

(Optional) DNS name for Map-Resolver

mr

(Optional) Map-Resolver IPv4 address to send Map-Request to

count

(Optional) Map-Requests to send before Map-Reply returned

count

(Optional) Number of Map-Requests

probe

(Optional) RLOC-probe each locator

vrf

(Optional) LIGing for specific VRF

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

  • /exec

lisp ddt

{ [ no ] lisp ddt }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

ddt

Configures a LISP-DDT mapping system functionality

Command Mode

  • /exec/configure /exec/configure/vrf

lisp ddt authoritative-prefix eid-prefix

{ [ no ] lisp ddt authoritative-prefix eid-prefix { <eid-prefix> | <eid-prefix6> } } | { [ no ] lisp ddt authoritative-prefix instance-id <iid> [ eid-prefix { <eid-prefix> | <eid-prefix6> } ] } | { [ no ] lisp ddt authoritative-prefix <star> } | { [ no ] lisp ddt authoritative-prefix instance-id { <iidp> | <range> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

ddt

Configure LISP-DDT parameters

authoritative-prefix

Configure EID-prefix this LISP-DDT node is authoritative for

instance-id

Instance ID of VPN for EID-prefix

iid

Instance-ID value

star

Authoritative prefix on root for all address space

iidp

Instance-ID in prefix format

range

Instance-ID range in 'x-y' format where y > x

eid-prefix

Authoritative IPv4 or IPv6 EID-prefix

eid-prefix

EID-prefix in IPv4 slash format

Command Mode

  • /exec/configure /exec/configure/vrf

lisp ddt delegate eid-prefix

{ [ no ] lisp ddt delegate { <node> | <node6> } { eid-prefix { <eid-prefix> | <eid-prefix6> } } [ priority <priority> weight <weight> ] [ public-key <key> ] [ map-server ] } | { [ no ] lisp ddt delegate { <node> | <node6> } instance-id <iid> [ eid-prefix { <eid-prefix> | <eid-prefix6> } ] [ priority <priority> weight <weight> ] [ public-key <key> ] [ map-server ] } | { [ no ] lisp ddt delegate { <node> | <node6> } instance-id { <iidp> | <range> } [ priority <priority> weight <weight> ] [ public-key <key> ] [ map-server ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

ddt

Configure LISP-DDT parameters

delegate

Configure LISP-DDT child in delegation hierarchy

node

IPv4 locator address of DDT node

instance-id

Instance ID of VPN for EID-prefix

iid

Instance-ID value

iidp

Instance-ID in prefix format

range

Instance-ID range in 'x-y' format where y > x

eid-prefix

Child delegration for IPv4 or IPv6 EID-prefix

eid-prefix

EID-prefix in IPv4 slash format

priority

(Optional) Configures which Locators from a set are preferred

priority

(Optional) Lower priority Locator takes preference

weight

(Optional) Traffic load-spreading among Locators

weight

(Optional) Specified in a percentage from 0 to 100

map-server

(Optional) Child delegate is a Map-Server

public-key

(Optional) DDT child's public key this DDT-node supplies for referrals

key

(Optional) RSA public-key

Command Mode

  • /exec/configure /exec/configure/vrf

lisp ddt inherit-referrals

{ [ no ] lisp ddt inherit-referrals }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

ddt

Configure LISP-DDT parameters

inherit-referrals

Inherit map-server referrals from parent DDT-node

Command Mode

  • /exec/configure /exec/configure/vrf

lisp ddt map-server-peer eid-prefix

{ [ no ] lisp ddt map-server-peer { <node> | <node6> } { eid-prefix { <eid-prefix> | <eid-prefix6> } } [ priority <priority> weight <weight> ] [ public-key <key> ] } | { [ no ] lisp ddt map-server-peer { <node> | <node6> } instance-id <iid> [ eid-prefix { <eid-prefix> | <eid-prefix6> } ] [ priority <priority> weight <weight> ] [ public-key <key> ] } | { [ no ] lisp ddt map-server-peer { <node> | <node6> } instance-id { <iidp> | <range> } [ priority <priority> weight <weight> ] [ public-key <key> ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

ddt

Configure LISP-DDT parameters

map-server-peer

Configure other map-server peers

node

IPv4 locator address of DDT node

instance-id

Instance ID of VPN for EID-prefix

iid

Instance-ID value

iidp

Instance-ID in prefix format

range

Instance-ID range in 'x-y' format where y > x

eid-prefix

Child delegration for IPv4 or IPv6 EID-prefix

eid-prefix

EID-prefix in IPv4 slash format

priority

(Optional) Configures which Locators from a set are preferred

priority

(Optional) Lower priority Locator takes preference

weight

(Optional) Traffic load-spreading among Locators

weight

(Optional) Specified in a percentage from 0 to 100

public-key

(Optional) DDT child's public key this DDT-node supplies for referrals

key

(Optional) RSA public-key

Command Mode

  • /exec/configure /exec/configure/vrf

lisp ddt private-key

[no] lisp ddt private-key <key>

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

ddt

Configure LISP-DDT parameters

private-key

Configures LISP-DDT private-key for signing Map-Referral messages

key

RSA private-key

Command Mode

  • /exec/configure /exec/configure/vrf

lisp ddt root

[no] lisp ddt root { <root> | <root6> } [ public-key <key> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

ddt

Configure LISP-DDT parameters

root

Configure LISP-DDT root of tree in Map-Resolver

root

IPv4 locator address of DDT root

public-key

(Optional) DDT root's public key used to verify signed Map-Referrals

key

(Optional) RSA public-key

Command Mode

  • /exec/configure /exec/configure/vrf

lisp dont-prime-map-cache

{ [ no ] lisp dont-prime-map-cache }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

dont-prime-map-cache

Do not send Map-Requests for arbitrary EIDs to prime map-cache

Command Mode

  • /exec/configure /exec/configure/vrf

lisp dynamic-eid

{ [ no ] lisp dynamic-eid <dyn-eid-name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

dynamic-eid

Configure dynamic-EIDs for roaming

dyn-eid-name

Name your dynamic-EID

Command Mode

  • /exec/configure/vrf

lisp dynamic-eid

{ [ no ] lisp dynamic-eid <dyn-eid-name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

dynamic-eid

Configure dynamic-EIDs for roaming

dyn-eid-name

Name your dynamic-EID

Command Mode

  • /exec/configure

lisp explicit-locator-path

[no] lisp explicit-locator-path <elp-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

explicit-locator-path

Configures a LISP Explicit Locator Path (ELP)

elp-name

Name of LISP ELP

Command Mode

  • /exec/configure/vrf

lisp explicit-locator-path

{ [ no ] lisp explicit-locator-path <elp-name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

explicit-locator-path

Configures a LISP Explicit Locator Path (ELP)

elp-name

Name of LISP ELP

Command Mode

  • /exec/configure

lisp extended-subnet-mode

{ [ no ] lisp extended-subnet-mode }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP interface configuration commands

extended-subnet-mode

Create dynamic-EID state when EIDs reside on their home subnet

Command Mode

  • /exec/configure/if-igp

lisp geo-coordinates

[no] lisp geo-coordinates <latitude> <longitude> [ <altitude> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

geo-coordinates

Configure Geo Coordinates for this router

latitude

Latitude in DMS format: 'degree-min-sec-N' or 'degree-min-sec-S

longitude

Longitude in DMS format: 'degree-min-sec-E' or 'degree-min-sec-W format

altitude

(Optional) Altitude in meters above sea-level

Command Mode

  • /exec/configure /exec/configure/vrf

lisp ignore-smr

[no] lisp ignore-smr

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

ignore-smr

Do not respond to SMRs when no map-cache entry exists

Command Mode

  • /exec/configure

lisp instance-id

[no] lisp instance-id <iid>

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

instance-id

Configures Instance-ID for global data-mappings

iid

24-bit instance-ID value

Command Mode

  • /exec/configure /exec/configure/vrf

lisp loc-reach-algorithm

[no] lisp loc-reach-algorithm { count-tcp | echo-nonce | { rloc-probing [ map-request-on-failure ] } }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

loc-reach-algorithm

Configure locator reachability algorithm

count-tcp

Count TCP SYNs and ACKs

echo-nonce

Request for nonce to echo back in data-plane

rloc-probing

Probe each high-priority RLOC with Map-Request as last resort

map-request-on-failure

(Optional) Send Map-Request to database mapping system when any RLOC for a map-cache entry becomes RLOC-probing unreachable

Command Mode

  • /exec/configure /exec/configure/vrf

lisp merge-registrations site-id

[no] lisp merge-registrations site-id <site-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

merge-registrations

ETRs merge registrations from Map-Notify messages

site-id

Configure site-id value for each xTR at site

site-id

Site-ID to group xTRs together

Command Mode

  • /exec/configure /exec/configure/vrf

lisp mobility

[no] lisp mobility <dyn-eid-name>

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP interface configuration commands

mobility

Configures to allow EID mobility on interface

dyn-eid-name

Name of the dynamic-EID to use

Command Mode

  • /exec/configure/if-igp

lisp mobility test-liveness

[no] lisp mobility test-liveness

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP interface configuration commands

mobility

Configures to allow EID mobility on interface

test-liveness

Ping discovered dyn-eid hosts on this interface periodically to determine host liveness

Command Mode

  • /exec/configure/if-igp

lisp mtu

[no] lisp mtu <mtu>

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

mtu

Configure the Max MTU value that LISP path will support

mtu

mtu

Command Mode

  • /exec/configure

lisp security

[no] lisp security [ strong ]

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

security

Configure LISP-SEC on ITR or PITR

strong

(Optional) Reject Map-Replies without LISP-SEC signatures included

Command Mode

  • /exec/configure /exec/configure/vrf

lisp site

{ [ no ] lisp site <site-name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

site

Configures LISP sites in a map-server

site-name

Name your LISP site

Command Mode

  • /exec/configure

lisp site

{ [ no ] lisp site <site-name> }

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

site

Configures LISP sites in a map-server

site-name

Name your LISP site

Command Mode

  • /exec/configure/vrf

lisp smr-local-locators

[no] lisp smr-local-locators

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

smr-local-locators

Send SMR to all locators for in local site

Command Mode

  • /exec/configure

lisp smr-locators

[no] lisp smr-locators

Syntax Description

no

(Optional) Negate a command or set its defaults

lisp

LISP global configuration commands

smr-locators

Send SMR to all RLOCs in locator-set for map-cache entry

Command Mode

  • /exec/configure

lisp to

{ lisp-rig | rig } [ instance-id <iid> ] { <hostname> | { <eid> | <eid6> } } to { <ddt-hostname> | { <ddt> | <ddt6> } }

Syntax Description

lisp-rig

LISP-DDT Referral Internet Groper

rig

LISP-DDT Referral Internet Groper

instance-id

(Optional) Instance-ID of VPN EID resides in

iid

(Optional) 24-bit instance-ID value

eid

RIG on a IPv4 Endpoint ID (EID)

hostname

DNS name for Endpoint ID (EID)

to

Where to send the Map-Request

ddt-hostname

DNS name for DDT-node

ddt

DDT-node IPv4 address to send Map-Request to

Command Mode

  • /exec

list

list

Syntax Description

list

Re-list all of the attribute list entries

Command Mode

  • /exec/configure/te/lsp-attr

list

list [ <index> ]

Syntax Description

list

Re-list all or part of the explicit path entries

index

(Optional) List starting at entry index number

Command Mode

  • /exec/configure/te/expl-path

listobject-boolean not

listobject-boolean <object-id> not

Syntax Description

listobject-boolean

Configure Object as member of tracking list

object-id

Tracked object

not

Negate Up status

Command Mode

  • /exec/configure/tr-list-bool

listobject-weight weight threshold-weight

listobject-weight { <object-id> weight <weight-val> } | threshold-weight { weight-thresh { weightup <up-weight> [ weightdown <down-weight> ] | weightdown <down-weight> [ weightup <up-weight> ] } } | no threshold-weight weight-thresh

Syntax Description

no

Negate a command or set its defaults

listobject-weight

Configure Object as member of tracking list

object-id

Tracked Object

weight

Assign a weight to object

weight-val

Assign a weight to object

threshold-weight

Threshold parameters

weight-thresh

Weight threshold

weightup

Up threshold

up-weight

Up threshold weight

weightdown

(Optional) Down threshold

down-weight

(Optional) Down threshold weight

Command Mode

  • /exec/configure/tr-list-thrw

listobject

[no] listobject <object-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

listobject

Configure Object as member of tracking list

object-id

Tracked Object

Command Mode

  • /exec/configure/tr-list-thrw /exec/configure/tr-list-thrp /exec/configure/tr-list-bool

lldp

[no] lldp { holdtime <i0> | reinit <i1> | timer <i2> | portid-subtype <i3> | tlv-select { management-address | port-description | port-vlan | power-management | system-capabilities | system-description | system-name | dcbxp } }

Syntax Description

no

(Optional) Negate a command or set its defaults

lldp

Configure global LLDP parameters

holdtime

Specify the holdtime (in sec) to be sent in packets

i0

holdtime in sec

reinit

Delay (in sec) for LLDP initialisation on any interface

i1

reinit in sec

timer

Specify the rate at which LLDP packets are sent (in sec)

i2

rate of packets in sec

portid-subtype

config portid subtype for LLDP TLV and SNMP MIBs

i3

0: long interface name (default), 1: short interface name

tlv-select

Selection of LLDP to send

management-address

Management Address TLV

port-description

Port Description TLV

port-vlan

Port Vlan ID TLV

power-management

IEEE 802.3 DTE Power via MDI TLV

system-capabilities

System Capabilities TLV

system-description

System Description TLV

system-name

System Name TLV

dcbxp

DCBXP TLVs

Command Mode

  • /exec/configure

lldp dcbx version auto

lldp dcbx version auto

Syntax Description

lldp

Configure LLDP parameters

dcbx

Configure DCBX parameters

version

Change the DCBX protocol version

auto

Auto-detect the DCBX version

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-gig-ether-all /exec/configure/if-gig-ether /exec/configure/if-eth-base /exec/configure/if-mgmt-ether

lldp dcbx version cee

[no] lldp dcbx version { cee | ieee }

Syntax Description

no

(Optional) Negate a command or set its defaults

lldp

Configure LLDP parameters

dcbx

Configure DCBX parameters

version

Change the DCBX protocol version

cee

The CEE version of DCBX

ieee

The IEEE 802.1 version of DCBX

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-gig-ether-all /exec/configure/if-gig-ether /exec/configure/if-eth-base /exec/configure/if-mgmt-ether

lldp eee rx_wake_time

[no] lldp eee { rx_wake_time <i0> | tx_wake_time <i1> }

Syntax Description

no

(Optional) Negate a command or set its defaults

lldp

Configure LLDP parameters

eee

Configure LLDP EEE parameters

rx_wake_time

Specify the EEE rx wake time

i0

EEE rx wake time

tx_wake_time

Specify the EEE tx wake time

i1

EEE tx wake time

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-gig-ether-all /exec/configure/if-gig-ether /exec/configure/if-eth-base /exec/configure/if-mgmt-ether

lldp receive

[no] lldp receive

Syntax Description

no

(Optional) Negate a command or set its defaults

lldp

Configure Interface LLDP parameters

receive

Enable LLDP reception on interface

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-gig-ether-all /exec/configure/if-gig-ether /exec/configure/if-eth-base /exec/configure/if-mgmt-ether

lldp tlv-select eee

[no] lldp tlv-select eee

Syntax Description

no

(Optional) Negate a command or set its defaults

lldp

Configure Interface LLDP parameters

tlv-select

Configure EEE parameter

eee

Enable/Disable LLDP EEE TLV

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-gig-ether-all /exec/configure/if-gig-ether /exec/configure/if-eth-base /exec/configure/if-mgmt-ether

lldp tlv-select management-address v4

[no] lldp tlv-select management-address { v4 | v6 }

Syntax Description

no

(Optional) Negate a command or set its defaults

lldp

Configure global LLDP parameters

tlv-select

Selection of LLDP to send

management-address

Management Address TLV

v4

Management Address TLV v4

v6

Management Address TLV v6

Command Mode

  • /exec/configure

lldp tlv-set management-address

[no] lldp tlv-set management-address <ip-addr>

Syntax Description

no

(Optional) Negate a command or set its defaults

lldp

Configure Interface LLDP parameters

tlv-set

LLDP TLV configuration for interface

management-address

Management address to be sent in management-tlv of LLDPDU.

ip-addr

IP address in dotted decimal format i.i.i.i

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-gig-ether-all /exec/configure/if-gig-ether /exec/configure/if-eth-base /exec/configure/if-mgmt-ether

lldp tlv-set management-address ipv6

[no] lldp tlv-set management-address <ipv6-addr> ipv6

Syntax Description

no

(Optional) Negate a command or set its defaults

lldp

Configure Interface LLDP parameters

tlv-set

LLDP TLV configuration for interface

management-address

Management address to be sent in management-tlv of LLDPDU.

ipv6

IPV6

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-gig-ether-all /exec/configure/if-gig-ether /exec/configure/if-eth-base /exec/configure/if-mgmt-ether

lldp tlv-set vlan

[no] lldp tlv-set vlan [ <vlan-id> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

lldp

Configure Interface LLDP parameters

tlv-set

LLDP TLV configuration for interface

vlan

VLAN-id whose SVI IP address should be used as management adrress in management-tlv of LLDPDU. Default is native VLAN.

vlan-id

(Optional) vlan-id within range of 1-4094

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-gig-ether-all /exec/configure/if-gig-ether /exec/configure/if-eth-base /exec/configure/if-mgmt-ether

lldp transmit

[no] lldp transmit

Syntax Description

no

(Optional) Negate a command or set its defaults

lldp

Configure Interface LLDP parameters

transmit

Enable LLDP transmission on interface

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-gig-ether-all /exec/configure/if-gig-ether /exec/configure/if-eth-base /exec/configure/if-mgmt-ether

load-balance

[no] load-balance { [ method { src { ip | ip-l4port <src-protocol> range <src-x> <src-y> } | dst { ip-dst | ip-l4port <dst-protocol> range <dst-x> <dst-y> } } | buckets <num> | mask-position <mask> ] + }

Syntax Description

no

(Optional) Negate a command or set its defaults

load-balance

ITD Loadbalance

method

(Optional) ITD Loadbalance method

src

(Optional) Source based parameters

dst

(Optional) Destination based parameters

ip

(Optional) IP

ip-l4port

(Optional) IP and L4 port

src-protocol

(Optional) Protocol

range

(Optional) Match only packets in the range of port numbers

src-x

(Optional)

src-y

(Optional)

ip-dst

(Optional) IP

dst-protocol

(Optional) Protocol

dst-x

(Optional)

dst-y

(Optional)

buckets

(Optional) Used to create the buckets for traffic distribution, and it should be in powers of 2

num

(Optional) Loadbalance bucket number

mask-position

(Optional) Loadbalance mask position

mask

(Optional) Loadbalance mask position number range 0-31 for IPv4 and 0-127 for IPv6

Command Mode

  • /exec/configure/itd

load-balance

[no] load-balance { [ method { src { ip | ip-l4port <src-protocol> range <src-x> <src-y> } | dst { ip-dst | ip-l4port <dst-protocol> range <dst-x> <dst-y> } } | buckets <num> | mask-position <mask> ] + }

Syntax Description

no

(Optional) Negate a command or set its defaults

load-balance

Loadbalance

method

(Optional) Loadbalance method

src

(Optional) Source based parameters

dst

(Optional) Destination based parameters

ip

(Optional) IP

ip-l4port

(Optional) IP and L4 port

src-protocol

(Optional) Protocol

range

(Optional) Match only packets in the range of port numbers

src-x

(Optional)

src-y

(Optional)

ip-dst

(Optional) IP

dst-protocol

(Optional) Protocol

dst-x

(Optional)

dst-y

(Optional)

buckets

(Optional) Used to create the buckets for traffic distribution, and it should be in powers of 2

num

(Optional) Loadbalance bucket number

mask-position

(Optional) Loadbalance mask position

mask

(Optional) Loadbalance mask position number range 0-31 for IPv4 and 0-127 for IPv6

Command Mode

  • /exec/configure/smartc

load-balance

[no] load-balance { [ method { src { ip | ip-l4port <src-protocol> range <src-x> <src-y> } | dst { ip-dst | ip-l4port <dst-protocol> range <dst-x> <dst-y> } } | buckets <num> | mask-position <mask> ] + }

Syntax Description

no

(Optional) Negate a command or set its defaults

load-balance

PLB Loadbalance options

method

(Optional) Loadbalance method

src

(Optional) Source based parameters

dst

(Optional) Destination based parameters

ip

(Optional) IP

ip-l4port

(Optional) IP and L4 port

src-protocol

(Optional) Protocol

range

(Optional) Match only packets in the range of port numbers

src-x

(Optional)

src-y

(Optional)

ip-dst

(Optional) IP

dst-protocol

(Optional) Protocol

dst-x

(Optional)

dst-y

(Optional)

buckets

(Optional) Used to create the buckets for traffic distribution, and it should be in powers of 2

num

(Optional) Loadbalance bucket number

mask-position

(Optional) Loadbalance mask position

mask

(Optional) Loadbalance mask position number range 0-23 for IPv4 and 0-127 for IPv6

Command Mode

  • /exec/configure/plb

load-balancing

load-balancing <load-bal> | no load-balancing [ <load-bal> ]

Syntax Description

no

Negate a command or set its defaults

load-balancing

Load balancing method

load-bal

Load balancing method

Command Mode

  • /exec/configure/if-eth-any/glbp

load-interval

load-interval <interval> | no load-interval [ <interval1> ]

Syntax Description

no

Negate a command or set its defaults

load-interval

Specify interval for load calculation for an interface

interval

Load interval delay in seconds

interval1

(Optional) Load interval delay in seconds

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel

load-interval

load-interval <interval> | no load-interval [ <interval1> ]

Syntax Description

no

Negate a command or set its defaults

load-interval

Specify interval for load calculation for an interface

interval

Load interval delay in seconds

interval1

(Optional) Load interval delay in seconds

Command Mode

  • /exec/configure/if-vlan-common

load-interval counter

load-interval counter <counter_val> <interval> | no load-interval counter <counter_val> [ <interval1> ]

Syntax Description

no

Negate a command or set its defaults

load-interval

Specify interval for load calculation for an interface

counter

Specify counter for this load interval

interval

Load interval delay in seconds

counter_val

Specify counter for this load interval

interval1

(Optional) Load interval delay in seconds

Command Mode

  • /exec/configure/if-vlan-common

load-interval counter

load-interval counter <counter_val> <interval> | no load-interval counter <counter_val> [ <interval1> ]

Syntax Description

no

Negate a command or set its defaults

load-interval

Specify interval for load calculation for an interface

counter

Specify counter for this load interval

counter_val

Specify counter for this load interval

interval

Load interval delay in seconds

interval1

(Optional) Load interval delay in seconds

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel

load

load <uri0>

Syntax Description

load

Load system image

uri0

Enter image URI

Command Mode

  • /exec

load

load <uri0> [ <s0> ]

Syntax Description

load

Load system image

uri0

Enter image URI

s0

(Optional) Options

Command Mode

  • /exec

load

load <uri0> [ <s0> ]

Syntax Description

load

Load system image

uri0

Enter image URI

s0

(Optional) Options

Command Mode

  • /exec

local-as

local-as <asn> | no local-as [ <asn> ]

Syntax Description

no

Negate a command or set its defaults

local-as

Specify the local-as for this vrf

asn

AS number

Command Mode

  • /exec/configure/router-bgp/router-bgp-vrf

local-as

{ local-as <asn> [ no-prepend [ replace-as [ dual-as ] ] ] } | { { no | default } local-as [ <asn> ] }

Syntax Description

no

Negate a command or set its defaults

default

Inherit values from a peer template

local-as

Specify the local-as number for the eBGP neighbor

asn

Autonomous System Number

no-prepend

(Optional) Do not prepend the local-as number to updates from the eBGP neighbor

replace-as

(Optional) Prepend only the local-as number to updates to eBGP neighbor

dual-as

(Optional) Connect using either the local-as number or the real as

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor-sess

local-label prefix

[no] { [ vrf { <vrf-name> | <vrf-known-name> } ] local-label <static-inlabel> prefix { <ipv6-prefix-mask> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

vrf

(Optional) VPN Routing/Forwarding instance name

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

local-label

Configure local label assignment and forwarding

static-inlabel

Label Value

prefix

For a given prefix

Command Mode

  • /exec/configure/mpls_static/ipv6

local-label prefix

[no] { [ vrf { <vrf-name> | <vrf-known-name> } ] local-label <static-inlabel> prefix { <prefix> <mask> | <prefix-mask> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

vrf

(Optional) VPN Routing/Forwarding instance name

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

local-label

Configure local label assignment and forwarding

static-inlabel

Label Value

prefix

For a given prefix

prefix

Destination prefix

mask

Destination prefix mask

prefix-mask

Destination prefix/mask

Command Mode

  • /exec/configure/mpls_static/ipv4

locator-led

[no] locator-led { chassis | module <module> | fan <fan_num> }

Syntax Description

no

(Optional) Negate a command or set its defaults

locator-led

blink locator led on device

chassis

blink chassis led

module

blink module led

module

please enter the module number

fan

blink Fan led

fan_num

fan number

Command Mode

  • /exec

lockdown

[no] lockdown

Syntax Description

no

(Optional) Negate a command or set its defaults

lockdown

Lockdown the LSP--disable reoptimization

Command Mode

  • /exec/configure/te/lsp-attr

log-adjacency-changes

[no] log-adjacency-changes [ detail ]

Syntax Description

no

(Optional) Negate a command or set its defaults

log-adjacency-changes

Log changes in adjacency state

detail

(Optional) Notify all state changes

Command Mode

  • /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

log-adjacency-changes

[no] log-adjacency-changes [ detail ]

Syntax Description

no

(Optional) Negate a command or set its defaults

log-adjacency-changes

Log changes in adjacency state

detail

(Optional) Notify all state changes

Command Mode

  • /exec/configure/router-ospf /exec/configure/router-ospf/vrf

log-adjacency-changes

[no] log-adjacency-changes

Syntax Description

no

(Optional) Negate a command or set its defaults

log-adjacency-changes

Log changes in adjacency state

Command Mode

  • /exec/configure/otv-isis/otv-isis-vrf-common

log-adjacency-changes

[no] log-adjacency-changes

Syntax Description

no

(Optional) Negate a command or set its defaults

log-adjacency-changes

Log changes in adjacency state

Command Mode

  • /exec/configure/router-isis/router-isis-vrf-common

log-adjacency-changes

{ [ no ] log-adjacency-changes } | { [ no ] [ eigrp ] log-neighbor-changes }

Syntax Description

no

(Optional) Negate a command or set its defaults

eigrp

(Optional) EIGRP router configuration commands

log-adjacency-changes

Log changes in adjacency state

log-neighbor-changes

Enable/Disable IP-EIGRP neighbor logging

Command Mode

  • /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

log-event-type

[no] [ eigrp ] log-event-type [ dual ] [ xmit ] [ transport ]

Syntax Description

no

(Optional) Negate a command or set its defaults

eigrp

(Optional) EIGRP router configuration commands

log-event-type

Set event types logged

dual

(Optional) Log DUAL events

xmit

(Optional) Log transmission events

transport

(Optional) Log transport events

Command Mode

  • /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

log-neighbor-changes

[no] log-neighbor-changes

Syntax Description

no

(Optional) Negate a command or set its defaults

log-neighbor-changes

Log a message for neighbor up/down event

Command Mode

  • /exec/configure/router-bgp/vrf-cmds

log-neighbor-changes

[ no | default ] log-neighbor-changes [ disable ]

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

log-neighbor-changes

Log message for neighbor up/down event

disable

(Optional) Disable logging of neighbor up/down event

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor-sess

log-neighbor-warnings

{ { [ eigrp ] log-neighbor-warnings [ <interval> ] } | { no [ eigrp ] log-neighbor-warnings [ <interval> ] } }

Syntax Description

no

Negate a command or set its defaults

eigrp

(Optional) EIGRP router configuration commands

log-neighbor-warnings

Enable/Disable IP-EIGRP neighbor warnings

interval

(Optional) Neighbor warning interval in seconds

Command Mode

  • /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

logging

[no] logging { lsp { path-errors | preemption | reservation-errors | setups | teardowns } | tunnel { lsp-selection | path change } } | logging { lsp { path-errors | preemption | reservation-errors | setups | teardowns } | tunnel { lsp-selection | path change } }

Syntax Description

no

Negate a command or set its defaults

logging

Trap logging configuration

lsp

LSP-specific traps logging configuration

path-errors

Log LSP Path Error traps

preemption

Log LSP Preemption traps

reservation-errors

Log LSP Reservation Error traps

setups

Log LSP Establishment Traps

teardowns

Log LSP Teardown Traps

tunnel

Tunnel-specific traps logging configuration

lsp-selection

Log Tunnel LSP Selection traps

path

Log Tunnel Path-related traps

change

Log Tunnel Path change traps

Command Mode

  • /exec/configure/te

logging

[no] logging { neighbor-changes |

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Enable LDP logging

neighbor-changes

Log LDP neighbor state changes

Command Mode

  • /exec/configure/ldp

logging abort

logging abort

Syntax Description

logging

Modify message logging facilities

abort

Flushes cached data without committing and releases the lock

Command Mode

  • /exec/configure

logging clear_console

logging clear_console

Syntax Description

logging

Exec logging commands

clear_console

Clear Console

Command Mode

  • /exec

logging console

[no] logging console [ <i0> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

console

Set console logging

i0

(Optional) 0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging debug

logging debug

Syntax Description

logging

Exec logging commands

debug

Debug logging

Command Mode

  • /exec

logging distribute

[no] logging distribute

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

distribute

Enables/disables fabric distribution using cfs.

Command Mode

  • /exec/configure

logging event link enable

[no] logging event { link-status | trunk-status } { enable | default }

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Configure logging for interface

event

Interface events

link-status

UPDOWN and CHANGE messages

trunk-status

TRUNK status messages

enable

To enable logging overriding port level configuration

default

default logging configuration used by interfaces not explicitly configured

Command Mode

  • /exec/configure

logging event port link-status

logging event port link-status [ default ] | no logging event port link-status

Syntax Description

no

Negate a command or set its defaults

logging

Configure logging for interface

event

Interface events

port

Port level events

link-status

UPDOWN and CHANGE messages

default

(Optional) Use the global default value

Command Mode

  • /exec/configure/if-ether-sub /exec/configure/if-port-channel-sub /exec/configure/if-gig-ether-sub /exec/configure/if-loopback /exec/configure/if-remote-ethernet-sub /exec/configure/if-ether-sub-p2p

logging event port link-status

logging event port link-status

Syntax Description

logging

Configure logging for interface

event

Interface events

port

Port level events

link-status

UPDOWN and CHANGE messages

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-eth-base /exec/configure/if-port-channel

logging event port link-status

[no] logging event port link-status

Syntax Description

no

Negate a command or set its defaults

logging

Configure logging for interface

event

Interface events

port

Port level events

link-status

UPDOWN and CHANGE messages

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-eth-base /exec/configure/if-port-channel

logging event port link-status default

logging event port link-status default

Syntax Description

logging

Configure logging for interface

event

Interface events

port

Port level events

link-status

UPDOWN and CHANGE messages

default

Use the global default value

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-eth-base /exec/configure/if-port-channel

logging event port trunk-status

logging event port trunk-status

Syntax Description

logging

Configure logging for interface

event

Interface events

port

Port level events

trunk-status

TRUNK status messages

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-eth-base /exec/configure/if-port-channel

logging event port trunk-status

[no] logging event port trunk-status

Syntax Description

no

Negate a command or set its defaults

logging

Configure logging for interface

event

Interface events

port

Port level events

trunk-status

TRUNK status messages

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-eth-base /exec/configure/if-port-channel

logging event port trunk-status default

logging event port trunk-status default

Syntax Description

logging

Configure logging for interface

event

Interface events

port

Port level events

trunk-status

TRUNK status messages

default

Use the global default value

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-eth-base /exec/configure/if-port-channel

logging flow-mod

[no] logging flow-mod

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Enable logging

flow-mod

Enable logging for flow-modify

Command Mode

  • /exec/configure/openflow/switch

logging flow-mod

[no] logging flow-mod

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Enable logging

flow-mod

Enable logging for flow-modify

Command Mode

  • /exec/configure/openflow/switch/sub-switch

logging flush

logging flush

Syntax Description

logging

Exec logging commands

flush

Flushing logging

Command Mode

  • /exec

logging invalid-username

[no] logging invalid-username

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

One Platform logging

invalid-username

Display invalid usernames in ONE-P log messages

Command Mode

  • /exec/configure/onep

logging level

{ logging level { auth <i1> | authpriv <i2> | cron <i3> | daemon <i4> | ftp <i5> | kernel <i6> | local0 <i7> | local1 <i8> | local2 <i9> | local3 <i10> | local4 <i11> | local5 <i12> | local6 <i13> | local7 <i14> | lpr <i15> | mail <i16> | news <i17> | syslog <i18> | user <i19> | uucp <i20> } | no logging level { auth [ <i1> ] | authpriv [ <i2> ] | cron [ <i3> ] | daemon [ <i4> ] | ftp [ <i5> ] | kernel [ <i6> ] | local0 [ <i7> ] | local1 [ <i8> ] | local2 [ <i9> ] | local3 [ <i10> ] | local4 [ <i11> ] | local5 [ <i12> ] | local6 [ <i13> ] | local7 [ <i14> ] | lpr [ <i15> ] | mail [ <i16> ] | news [ <i17> ] | syslog [ <i18> ] | user [ <i19> ] | uucp [ <i20> ] } }

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

auth

Set level for Authorization System

i1

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

authpriv

Set level for Authorization (Private) system

i2

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

cron

Set level for Cron/at facility

i3

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

daemon

Set level for System daemons

i4

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

ftp

Set level for File Transfer System

i5

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

kernel

Set level for kernel

i6

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

local0

Set level for Local use daemons

i7

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

local1

Set level for Local use daemons

i8

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

local2

Set level for Local use daemons

i9

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

local3

Set level for Local use daemons

i10

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

local4

Set level for Local use daemons

i11

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

local5

Set level for Local use daemons

i12

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

local6

Set level for Local use daemons

i13

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

local7

Set level for Local use daemons

i14

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

lpr

Set level for Line Printer System

i15

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

mail

Set level for Mail system

i16

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

news

Set level for USENET news

i17

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

syslog

Set level for Internal Syslog Messages

i18

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

user

Set level for User Process

i19

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

uucp

Set level for Unix-to-Unix copy system

i20

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level

[no] logging level { { otv isis } | isis_otv } <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

otv

Set syslog filter level for OTV

isis

Set syslog filter level for IS-IS

isis_otv

Show OTV ISIS logging configuration

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level

[no] logging level { xml server | xmlma } <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

xml

xml agent

server

xml agent server

xmlma

xml master agent. Same as combination of keywords xml server

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level aaa

logging level aaa <i0> | no logging level aaa [ <i0> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

aaa

Set level for aaa syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level aclmgr

[no] logging level aclmgr <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

aclmgr

Set level for aclmgr syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level adbm

[no] logging level adbm <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

adbm

Set level for adbm syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level adjmgr

[no] logging level adjmgr <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

adjmgr

Set syslog filter level for Adjacency Manager

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level all

{ logging level { all <i0> } | no logging level { all [ <i0> ] } }

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

all

Set level for all facilities

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level amt

[no] logging level amt <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

amt

Set syslog filter level for AMT

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level arp

{ logging level arp <level> } | { no logging level arp [ <level> ] }

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

arp

Set syslog filter level for ARP

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level ascii-cfg

[no] logging level ascii-cfg <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ascii-cfg

Set logging level for ascii-cfg

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level bfd

[no] logging level bfd <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

bfd

Set level for bfd syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level bgp

[no] logging level bgp <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

bgp

Set syslog filter level for BGP

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level bloggerd

[no] logging level bloggerd <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

bloggerd

Set level for BloggerD syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level bootvar

[no] logging level bootvar <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

bootvar

Set level for bootvar

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level callhome

logging level callhome <i0> | no logging level callhome [ <i0> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

callhome

Callhome syslog level

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level capability

[no] logging level capability <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

capability

Set syslog level for mig utils daemon

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level catena

[no] logging level catena <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

catena

Set level for catena syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level cdp

logging level cdp <i0> | no logging level cdp [ <i0> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

cdp

Set level for CDP syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level cert

[no] logging level { cert-enroll <i0> | cert_enroll <i1> }

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

cert-enroll

Cert-enroll syslog level

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

cert_enroll

Cert-enroll syslog level

i1

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level cfs

[no] logging level cfs <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level clis

[no] logging level clis <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

clis

Set syslog filter level for CLIS

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level clk_mgr

[no] logging level clk_mgr <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

clk_mgr

Set level for clock manager syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level confcheck

{ logging level confcheck <i0> | no logging level confcheck [ <i0> ] }

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level copp

logging level copp <i0> | no logging level copp [ <i0> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

copp

Set level for copp syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level core

{ logging level core <i0> | no logging level core [ <i0> ] }

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

core

core daemon syslog level

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level cts

[no] logging level cts <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

cts

Set level for cts syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level device_test

[no] logging level device_test <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

device_test

Set level for GOLD Device Test syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level dhclient

[no] logging level dhclient <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

dhclient

Set level for dhcp client syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level dhcp_snoop

logging level dhcp_snoop <level> | no logging level dhcp_snoop [ <level> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

dhcp_snoop

Set level for dhcp snoop syslog messages

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level diagclient

[no] logging level diagclient <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

diagclient

Set level for GOLD DiagClient syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level diagmgr

[no] logging level diagmgr <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

diagmgr

Set level for GOLD DiagMgr syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level dot1x

[no] logging level dot1x <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

dot1x

Set level for dot1x syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level ecp

[no] logging level ecp <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ecp

Set syslog filter level for ECP

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level eigrp

[no] logging level eigrp [ <eigrp-ptag> ] <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

eigrp

Set syslog filter level for EIGRP

eigrp-ptag

(Optional) Process tag

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level eltm

logging level eltm <i0> | no logging level eltm

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

eltm

Set level for eltm syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level ethdstats

[no] logging level { ethdstats <i0> | eth_dstats <i0> }

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ethdstats

delta statistics syslog level

eth_dstats

delta statistics syslog level

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level ethpm

[no] logging level ethpm <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ethpm

Set level for ethpm syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level ethpm link

[no] logging level ethpm { link-up | link-down } <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ethpm

Set level for ethpm syslog messages

link-up

Configure logging level for link up syslog messages

link-down

Configure logging level for link down syslog messages

level

Logging Level

Command Mode

  • /exec/configure

logging level evb

[no] logging level evb <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

evb

Set syslog filter level for EVB

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level evmc

[no] logging level evmc <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

evmc

Set level for evmc syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level evmed

[no] logging level evmed <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

evmed

Set level for evmed syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level evms

[no] logging level evms <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

evms

Set level for evms syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level fabric forwarding

[no] logging level fabric forwarding <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level feature-mgr

{ logging level feature-mgr <i0> | no logging level feature-mgr [ <i0> ] }

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

feature-mgr

Set feature manager syslog level

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level fs-daemon

{ logging level fs-daemon <i0> | no logging level fs-daemon [ <i0> ] }

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

fs-daemon

fs daemon syslog level

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level glbp

[no] logging level glbp <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

glbp

Set level for glbp syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level gpixm

[no] logging level gpixm <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

gpixm

Set level for global-pixm syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level hsrp

[no] logging level hsrp <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

hsrp

Set level for hsrp syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level hw_telemetry

[no] logging level hw_telemetry <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

hw_telemetry

Set level for hw_telemetry syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level icam

[no] logging level icam <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

icam

Set level for icam syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level igmp

[no] logging level [ ip ] igmp <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ip

(Optional) Configure IP features

igmp

IGMP global configuration commands

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level im

[no] logging level { im <i0> | ifmgr <i0> }

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

im

Set level for im syslog messages

ifmgr

Set level for im syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level imp

[no] logging level imp <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

imp

Set level for imp syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level interface-vlan

[no] logging level interface-vlan <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

interface-vlan

Set level for interface vlan syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level ip pim

[no] logging level ip pim <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ip

Configure IP features

pim

Set syslog filter level for PIM

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level ip sla responder

[no] logging level ip sla responder <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ip

sla

Service Level Agreement (SLA)

responder

Set level for sla-responder syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level ip sla sender

[no] logging level ip sla sender <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ip

sla

Service Level Agreement (SLA)

sender

Set level for sla-sender syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level ipconf

[no] logging level ipconf { ipv6 <i0> | <i1> }

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ipconf

Set level for ipconf syslog messages

ipv6

Set level for ipconf syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

i1

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level ipfib

logging level ipfib <i0> | no logging level ipfib

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ipfib

Set level for ipfib syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level ipqos

[no] logging level { ipqos | IPQOSMGR } <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level ipv6 pim

[no] logging level ipv6 pim <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ipv6

Configure IPv6 features

pim

Set syslog filter level for PIM6

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level iscm

[no] logging level iscm <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

iscm

Set level for iscm syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level iscm

[no] logging level iscm <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

iscm

Set level for iscm syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level isis

[no] logging level isis <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

isis

Set syslog filter level for IS-IS

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level keystore

logging level { keystore | sksd } <i0> | no logging level { keystore | sksd } [ <i0> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

keystore

Keystore syslog level

sksd

Keystore/sksd syslog level

i0

Command Mode

  • /exec/configure

logging level l3vm

[no] logging level l3vm <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

l3vm

Set syslog filter level for L3VM

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level lacp

[no] logging level lacp <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

lacp

Set level for lacp syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level ldap

logging level ldap <i0> | no logging level ldap [ <i0> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ldap

Set level for ldap syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level license

logging level { license | licmgr } <i0> | no logging level { license | licmgr } [ <i0> ]

Syntax Description

no

Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

license

Licensing syslog level

licmgr

Licensing syslog level

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level lim

[no] logging level lim <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

lim

Set level for lim syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level lisp

[no] logging level lisp <level>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

lisp

Set logging level for LISP

level

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level lldp

[no] logging level lldp <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

lldp

Set level for lldp syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level mmode

[no] logging level mmode <i0>

Syntax Description

no

(Optional) Negate a command or set its defaults

logging

Modify message logging facilities

level

Facility parameter for syslog messages

mmode

Set level for maintenance mode syslog messages

i0

0-emerg 1-alert 2-crit 3-err 4-warn 5-notif 6-inform 7-debug

Command Mode

  • /exec/configure

logging level module

[no] logging level module <i0>

Syntax Description

no

(Optional) Negate a command or set its default