{ packet-size <packetsize> }

Syntax Description

Command Mode

• /exec/configure/configngoamconnectcheck

{ packet <hex-string> } | { no packet }

Syntax Description

Command Mode

• /exec/configure/configngoamprofileflow

[no] param-list <plistname> [ cross-check ] | param-list <plistname>

Syntax Description

Command Mode

• /exec/configure

[no] parity { even | none | odd }

Syntax Description

Command Mode

• /exec/configure/com1

[no] parity <parity-value>

Syntax Description

Command Mode

• /exec/configure/console

[no] passive-interface default

Syntax Description

Command Mode

• /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

[no] passive-interface default

Syntax Description

Command Mode

• /exec/configure/router-ospf /exec/configure/router-ospf/vrf

[no] passive-interface default <level>

Syntax Description

Command Mode

• /exec/configure/router-isis/router-isis-vrf-common

[no] passive-interface default

Syntax Description

Command Mode

• /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

password <password-string> | { no | default } password [ <password-string> ]

Syntax Description

Command Mode

• /exec/configure/router-bgp/router-bgp-neighbor /exec/configure/router-bgp/router-bgp-neighbor-stmp /exec/configure/router-bgp/router-bgp-vrf-neighbor /exec/configure/router-bgp/router-bgp-template-neighbor /exec/configure/router-bgp/router-bgp-prefixneighbor /exec/configure/router-bgp/router-bgp-vrf-prefixneighbor

password [ vrf { <vrf-name> | <vrf-known-name> } ] { required [ req-for <req-pfx-list> ] | { fallback | option <seq-num> opt-for <opt-pfx-list> } { key-chain <name> } } | no password [ vrf { <vrf-name> | <vrf-known-name> } ] { required | fallback | option <seq-num> }

Syntax Description

Command Mode

• /exec/configure/ldp

{ [ no ] password <passwd> }

Syntax Description

Command Mode

• /exec/configure/dot1x-cred

[no] password prompt username

Syntax Description

Command Mode

• /exec/configure

[no] password secure-mode

Syntax Description

Command Mode

• /exec/configure

[no] password strength-check

Syntax Description

Command Mode

• /exec/configure

[no] path-option [ protect ] <pref> | path-option <pref> dynamic [ attributes <attr-name> | { bandwidth <kbps> | lockdown } + ] | path-option [ protect ] <pref> explicit { identifier <id-num> | name <name> } [ { attributes <attr-name> [ verbatim ] | { bandwidth <kbps> | lockdown | verbatim } + } ]

Syntax Description

Command Mode

• /exec/configure/if-te /exec/configure/tunnel-te/cbts-member

[no] path-selection metric | path-selection metric { igp | te }

Syntax Description

Command Mode

• /exec/configure/if-te /exec/configure/tunnel-te/cbts-member

path-selection metric { igp | te } | no path-selection metric

Syntax Description

Command Mode

• /exec/configure/te

[no] path-selection overload allow | path-selection overload allow { head [ middle ] [ tail ] | middle [ tail ] | tail }

Syntax Description

Command Mode

• /exec/configure/te

path <dn> [ depth { <level> | unbounded } ] [ query-condition <query> ] [ filter-condition <filter> ] | no path <dn>

Syntax Description

Command Mode

• /exec/configure/telemetry/sensor-group

{ no path <path-num> | path <path-num> next-hop <next-hop> out-label-stack { <static-outlabel> + | implicit-null } }

Syntax Description

Command Mode

• /exec/configure/mpls_static/ipv4/lsp/inlabel/forw

pathtrace nve { { { { ip { <numeric10> | unknown } } [ vrf { <vrf-name> | <vrf-known-name> } | { <dot1qid1> } ] } | mac <dmac> <dot1qid> [ <intfid> ] } [ profile <pid> ] [ payload { [ mac-addr <dstmac> <smac> ] [ dot1q <dot1q-id> ] [ ip <dstip> <srcip> | ipv6 <dstipv6> <srcipv6> ] [ port <sport> <dport> ] [ proto <proto-id> ] [ src-intf <src_if> ] } payload-end ] [ copy-to <copy-to-ip> [ ext-id <ext_id> ] ] [

Syntax Description

Command Mode

• /exec

[no] payload

Syntax Description

Command Mode

• /exec/configure/configngoamconnectcheck

{ payload { test pattern-type <test-id> | pad <pad-val> } } | { no payload { test pattern-type | pad } }

Syntax Description

Command Mode

• /exec/configure/configngoamprofile

peer-gateway [ exclude-vlan <vlan-list> ] | no peer-gateway

Syntax Description

Command Mode

• /exec/configure/vpc-domain

[no] peer-ip <addr>

Syntax Description

Command Mode

• /exec/configure/if-nve/vni/ingr-rep

peer-keepalive destination <dst-ip> [ [ source <src-ip> | udp-port <udp-port-num> | vrf { <vrf-name> | <vrf-known-name> } | { interval <interval-ms> timeout <time-out> } | tos-byte <tos-byte-value> | hold-timeout <hold-time-out> ] + | [ source <src-ip> | udp-port <udp-port-num> | vrf { <vrf-name> | <vrf-known-name> } | { interval <interval-ms> timeout <time-out> } | tos { <tos-value> | min-delay | max-throughput | max-reliability | min-monetary-cost | normal } | hold-timeout <hold-time-out> ] + | [ source <src-ip> | udp-port <udp-port-num> | vrf { <vrf-name> | <vrf-known-name> } | { interval <interval-ms> timeout <time-out> } | precedence { <prec-vlaue> | network | internet | critical | flash-override | flash | immediate | priority | routine } | hold-timeout <hold-time-out> ] + ]

Syntax Description

Command Mode

• /exec/configure/vpc-domain

[no] peer-switch

Syntax Description

Command Mode

• /exec/configure/vpc-domain

peer-type { fabric-external | fabric-border-leaf } | { no | default } peer-type

Syntax Description

Command Mode

• /exec/configure/router-bgp/router-bgp-neighbor-sess

[no] peer ip <ip-addr>

Syntax Description

Command Mode

• /exec/configure/itd-inout

[no] peer ip <ip-addr>

Syntax Description

Command Mode

• /exec/configure/plb-inout

[no] peer local service <service-name>

Syntax Description

Command Mode

• /exec/configure/itd

[no] peer local service <service-name>

Syntax Description

Command Mode

• /exec/configure/plb

[no] peer vdc <vdc-id> service <service-name>

Syntax Description

Command Mode

• /exec/configure/itd

[no] peer <svc-name> vpc <num>

Syntax Description

Command Mode

• /exec/configure/smartc

perf [ { record { context-switch | profile } { system | process <i0> } [ <s1> ] } | { stop { all | <s0> } } | { list } | { create-archive <s2> } | { remove { all | <s3> } } ]

Syntax Description

Command Mode

• /exec

[no] periodic-inventory notification

Syntax Description

Command Mode

• /exec/configure/callhome

periodic-inventory notification { interval <i0> | timeofday <s0> }

Syntax Description

Command Mode

• /exec/configure/callhome

{ [ <seqno> ] | no } periodic { { Monday | Tuesday | Wednesday | Thursday | Friday | Saturday | Sunday } + | daily | weekdays | weekend } <stime> to <etime>

Syntax Description

Command Mode

• /exec/configure/timerange

{ [ <seqno> ] | no } periodic { Monday | Tuesday | Wednesday | Thursday | Friday | Saturday | Sunday } <stime> to { <eday> } <etime>

Syntax Description

Command Mode

• /exec/configure/timerange

[no] permit interface <if0>

Syntax Description

Command Mode

• /exec/configure/role/interface

[no] permit vlan <vlan-mrange>

Syntax Description

Command Mode

• /exec/configure/role/vlan

[no] permit vrf <vrf-name>

Syntax Description

Command Mode

• /exec/configure/role/vrf

[no] permit vsan <vsan-mrange>

Syntax Description

Command Mode

• /exec/configure/role/vsan

[no] personality

Syntax Description

Command Mode

• /exec/configure

personality backup { <uri_local> | <uri_remote> [ password <password> ] [ vrf <vrf-known-name> ] }

Syntax Description

Command Mode

• /exec

personality restore <uri> [ user-name <user> ] [ password <password> ] [ hostname <hostname> ] [ vrf <vrf_name> ]

Syntax Description

Command Mode

• /exec

{ phone-contact <s0> | no phone-contact }

Syntax Description

Command Mode

• /exec/configure/callhome

ping [ { { <alpha> | <numeric> [ loopback interface <interface> ] } | { multicast <group> interface <interface> [ loopback ] } } [ [ source-interface <src-intf> | vrf { <vrf-name> | <vrf-known-name> } ] [ count { <count> | unlimited } | packet-size <packetsize> | vrf { <vrf-name> | <vrf-known-name> } | interval <interval> | source { <alpha> | <numeric1> } | df-bit | timeout <timeout> ] + | [ count { <count> | unlimited } | packet-size <packetsize> | source-interface <src-intf> | interval <interval> | df-bit | timeout <timeout> ] + ] ]

Syntax Description

Command Mode

• /exec

ping6 { { <host> | <hostname> } | { multicast <group> } } [ [ { count { <count> | unlimited } } | { packet-size <packetsize> } | [ source { <host1> | <hostname> } ] | vrf { <vrf-name> | <vrf-known-name> } | timeout <timeout> | { interval <interval> } ] + | [ { count { <count> | unlimited } } | { packet-size <packetsize> } | { source-interface <src-intf> } | timeout <timeout> | { interval <interval> } ] + ]

Syntax Description

Command Mode

• /exec

ping mpls { nil-fec labels <comma-separated-labels> } { output { ointerface <tx-interface> } nexthop <nexthop-ip-addr> } [ { repeat <count> } | { { size <size> } | { sweep <min-size> <max-size> <increment> } } | { timeout <seconds> } | { interval <milliseconds> } | { destination <addr-start> [ <addr-end> [ <addr-incr-mask> | <addr-incr> ] ] } | { source <addr> } | { exp <exp-value> } | { pad <pattern> } | { ttl <ttl> } | { verbose } | { reply { { mode { <reply-mode-ipv4> | router-alert | control-channel | no-reply } } | { dscp { <dscp-bits> | af11 | af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 | cs1 | cs2 | cs3 | cs4 | cs5 | cs6 | cs7 | default | ef } } | { pad-tlv } } } + | { force-explicit-null } | { dsmap [ hashkey { none | { hash-ipv4 { bitmap <bitmap-size> } } } ] } | { flags { fec } } ] +

Syntax Description

Command Mode

• /exec

ping nve { { { { { ip { <numeric10> | <numeric11> | unknown } } [ vrf { <vrf-name> | <vrf-known-name> } | { <dot1qid1> } ] } | mac <dmac> <dot1qid> [ <intfid> ] } [ profile <pid> ] } [ payload { [ mac-addr <dstmac> <smac> ] [ dot1q <dot1q-id> ] [ ip <dstip> <srcip> | ipv6 <dstipv6> <srcipv6> ] [ port <sport> <dport> ] [ proto <proto-id> ] [ src-intf <src_if> ] } payload-end ] [ source { <numeric1> | <numeric2> } |

Syntax Description

Command Mode

• /exec

{ [ no ] pktmgr cache disable }

Syntax Description

Command Mode

• /exec/configure

{ [ no ] pktmgr discard [ type <type> ] [ direction <direction> ] [ detail ] }

Syntax Description

Command Mode

• /exec

[no] { platform | hardware } access-list capture

Syntax Description

Command Mode

• /exec/configure

[no] { platform | hardware } access-list fp_dnl

Syntax Description

Command Mode

• /exec/configure

[no] { platform | hardware } fabricpath mac-learning module <module> [ port-group { 1-4 | 5-8 | 9-12 | 13-16 | 17-20 | 21-24 | 25-28 | 29-32 | 33-36 | 37-40 | 41-44 | 45-48 } + ]

Syntax Description

Command Mode

• /exec/configure

[no] { platform | hardware } forwarding interface statistics mode { mpls | default } [ module <module-num> ]

Syntax Description

Command Mode

• /exec/configure

[no] { platform | hardware } forwarding layer-2 f1 exclude supervisor

Syntax Description

Command Mode

• /exec/configure

[no] { platform | hardware } ip verify { address { source { broadcast | multicast } | class-e | destination { zero } | identical | reserved } | checksum | protocol | fragment | length { minimum | consistent | maximum { max-frag | udp | max-tcp } } | tcp { tiny-frag } | version | syslog }

Syntax Description

Command Mode

• /exec/configure

[no] { platform | hardware } ipv6 verify { length { consistent | maximum { max-frag | udp | max-tcp } } | tcp { tiny-frag } | version }

Syntax Description

Command Mode

• /exec/configure

[no] { platform | hardware } qos { oq-stats [ { q0 | q1 | q2 | q3 | q4 | q5 | q6 | q7 | q8 | q9 } ] [ { counter0 | counter1 | counter2 | counter3 | counter4 | counter5 | counter6 | counter7 | counter8 | counter9 } ] type { all | <sel1> [ <sel2> ] } [ module <module> ] }

Syntax Description

Command Mode

• /exec/configure

[no] { platform | hardware } qos { min-buffer qos-group <buff-prof-opts> [ module <module> ] }

Syntax Description

Command Mode

• /exec/configure

[no] { platform | hardware } qos { ing-pg-hdrm-reserve percent <percent-val> [ module <module> ] }

Syntax Description

Command Mode

• /exec/configure

[no] { platform | hardware } qos { oq-drops type <sel> [ module <module> ] }

Syntax Description

Command Mode

• /exec/configure

[no] { platform | hardware } qos { [ cpu-pg-size <cpu-size> ] [ lcpu-pg-size <lcpu-size> ] [ span-pg-size <span-size> ] }

Syntax Description

Command Mode

• /exec/configure

[no] { platform | hardware } qos include { ipg [ module <module> ] }

Syntax Description

Command Mode

• /exec/configure

[no] { platform | hardware } qos { ing-pg-share [ module <module> ] }

Syntax Description

Command Mode

• /exec/configure

[no] { platform | hardware } qos { ing-pg-no-min [ pgmin <pgmin> ] [ module <module> ] }

Syntax Description

Command Mode

• /exec/configure

[no] plb [ <svc-name> ] [ service <service-name> ]

Syntax Description

Command Mode

• /exec/configure

[no] plb analytics <service-name>

Syntax Description

Command Mode

• /exec/configure

[no] plb device-group <group-name>

Syntax Description

Command Mode

• /exec/configure

{ plb session device-group <group-name> } | { no plb session device-group <group-name> }

Syntax Description

Command Mode

• /exec/configure

plugin-test load <uri0> [ [ <uri1> ] [ <uri2> ] ]

Syntax Description

Command Mode

• /exec

plugin-test unload <s0> [ [ <s1> ] [ <s2> ] ]

Syntax Description

Command Mode

• /exec

[no] police [ { { [ cir ] { <cir-val> [ <opt_kbps_mbps_gbps_pps_cir> ] | percent <cir-perc> } } { [ { [ bc ] <bc-val> [ <opt_kbytes_mbytes_gbytes_bc> ] } ] } { [ { pir { <pir> [ <opt_kbps_mbps_gbps_pps_pir> ] | percent1 <pir-perc> } } [ { [ be ] <be-val> [ <opt_kbytes_mbytes_gbytes_be> ] } ] ] } { [ { conform { <opt_drop_transmit_conform> | { set-cos-transmit <set-cos-val> } | { set-dscp-transmit { <set-dscp-val> | <opt_set_dscp> } } | { set-prec-transmit { <set-prec-val> | <opt_set_prec> } } } } [ { exceed { <opt_drop_transmit_exceed> | { set dscp1 dscp2 table cir-markdown-map } } } ] [ { violate { <opt_drop_transmit_violate> | { set1 dscp3 dscp4 table1 pir-markdown-map } } } ] ] } } ]

Syntax Description

Command Mode

• /exec/configure/pmap/class

police { [ cir ] { <cir-val> [ <opt_kbps_mbps_gbps_pps_cir> ] | percent <cir-perc> } } { [ { [ bc ] <bc-val> [ <opt_kbytes_mbytes_gbytes_bc> ] } ] } { [ { pir { <pir> [ <opt_kbps_mbps_gbps_pps_pir> ] | percent1 <pir-perc> } } [ { [ be ] <be-val> [ <opt_kbytes_mbytes_gbytes_be> ] } ] ] } { [ { conform { <opt_drop_transmit_conform> | { set-cos-transmit <set-cos-val> } | { set-dscp-transmit { <set-dscp-val> | <opt_set_dscp> } } | { set-prec-transmit { <set-prec-val> | <opt_set_prec> } } } } [ { exceed { <opt_drop_transmit_exceed> | { set dscp1 dscp2 table cir-markdown-map } } } ] [ { violate { <opt_drop_transmit_violate> | { set1 dscp3 dscp4 table1 pir-markdown-map } } } ] ] } | police { pps { <pps-val> } }

Syntax Description

Command Mode

• /exec/configure/pmap/class

[no] policy-map [ type qos ] [ match-first ] <pmap-name-qos>

Syntax Description

Command Mode

• /exec/configure

[no] policy-map type control-plane <pmap-name>

Syntax Description

Command Mode

• /exec/configure

[no] policy-map type network-qos <pmap-name-nq>

Syntax Description

Command Mode

• /exec/configure

[no] policy-map type psp { <pmap-name-plc> | { handle <ppf_id> } } [ table <table_type> ] [ client <clienttype> <clientID> ]

Syntax Description

Command Mode

• /exec/configure

[no] policy-map type queuing [ match-first ] <pmap-name-que>

Syntax Description

Command Mode

• /exec/configure

policy { { dynamic identity <device-id> } | { static sgt <sgt> [ trusted ] } } | no policy static | no policy dynamic

Syntax Description

Command Mode

• /exec/configure/cts-manual

[no] policy <name>

Syntax Description

Command Mode

• /exec/configure/nbm-flow-policy

pop [ <name> ]

Syntax Description

Command Mode

• /global

port-channel limit | no port-channel limit

Syntax Description

Command Mode

• /exec/configure/vpc-domain

port-channel load-balance1 ethernet <algorithm> [ symmetric ] | no port-channel load-balance1 ethernet [ <algorithm> [ symmetric ] ]

Syntax Description

Command Mode

• /exec/configure

port-channel load-balance2 resilient | no port-channel load-balance2 resilient

Syntax Description

Command Mode

• /exec/configure

[no] port-channel load-balance hash-modulo-f2

Syntax Description

Command Mode

• /exec/configure

[no] port-channel load-balance hash enable

Syntax Description

Command Mode

• /exec/configure

{ port-group <name> } | { no port-group <name> }

Syntax Description

Command Mode

• /exec/configure/smartc

{ port-group <name> } | { no port-group <name> }

Syntax Description

Command Mode

• /exec/configure/catena

[no] port-profile [ type <typeval> ] { <profilename> | <s0> }

Syntax Description

Command Mode

• /exec/configure

[no] port-profile dump

Syntax Description

Command Mode

• /exec

[no] port-profile no-redirection

Syntax Description

Command Mode

• /exec

[no] port-security stop learning

Syntax Description

Command Mode

• /exec

{ port <sport> <dport> }

Syntax Description

Command Mode

• /exec/configure/configngoamccpayload

{ port <tportnum> } | { no port [ <tportnum-ignore> ] }

Syntax Description

Command Mode

• /exe/configure/onep/tls

[no] port control <port-control-name>

Syntax Description

Command Mode

• /exec/configure/itd-inout

[no] port control <port-control-name>

Syntax Description

Command Mode

• /exec/configure/plb-inout

{ port { destination | source } <port> } | { no port { destination | source } }

Syntax Description

Command Mode

• /exec/configure/configngoamprofileflow

[no] port <port-range> type { ethernet | fc }

Syntax Description

Command Mode

• /exec/configure/slot

[no] power efficient-ethernet auto

Syntax Description

Command Mode

• /exec/configure/if-ethernet-all /exec/configure/if-eth-base

[no] power efficient-ethernet sleep threshold aggressive

Syntax Description

Command Mode

• /exec/configure/if-ethernet-all /exec/configure/if-eth-base

{ power inline { <port-mode-never> | <port-mode> [ max <wattage> ] } } | { no power inline { <port-mode-never> | <port-mode> } }

Syntax Description

Command Mode

• /exec/configure/if-eth-base /exec/configure/if-ethernet-all

{ power inline default_consumption <wattage> } | { no power inline default_consumption }

Syntax Description

Command Mode

• /exec/configure/if-eth-base /exec/configure/if-ethernet-all

{ power inline police action <police-action> } | { no power inline police action }

Syntax Description

Command Mode

• /exec/configure/if-eth-base /exec/configure/if-ethernet-all

{ power inline port priority <port-priority> } | { no power inline port priority <port-priority> }

Syntax Description

Command Mode

• /exec/configure/if-eth-base /exec/configure/if-ethernet-all

[no] power redundancy-mode combined

Syntax Description

Command Mode

• /exec/configure

[no] power redundancy-mode combined force

Syntax Description

Command Mode

• /exec/configure

[no] power redundancy-mode insrc-redundant

Syntax Description

Command Mode

• /exec/configure

[no] power redundancy-mode ps-redundant

Syntax Description

Command Mode

• /exec/configure

pps <pps> <burst> | no pps [ <pps> ] [ <burst> ]

Syntax Description

Command Mode

• /exec/configure/router-ospf /exec/configure/router-ospf/vrf

pps <pps> <burst> | no pps [ <pps> ] [ <burst> ]

Syntax Description

Command Mode

• /exec/configure/router-ospf3 /exec/configure/router-ospf3/vrf

{ { no | default } precision | precision { milliseconds | microseconds } }

Syntax Description

Command Mode

• /exec/configure/ip-sla/jitter

[no] preempt [ delay { minimum <min-delay> } ]

Syntax Description

Command Mode

• /exec/configure/if-eth-any/glbp

[no] preempt | preempt

Syntax Description

Command Mode

• /exec/configure/if-eth-any/vrrpv3

[no] preempt

Syntax Description

Command Mode

• /exec/configure/if-eth-any/vrrp

[no] preempt delay | preempt delay minimum <secs>

Syntax Description

Command Mode

• /exec/configure/if-eth-any/vrrpv3

preempt delay minimum <min-delay> reload <rel-delay> sync <sync-delay> | preempt delay reload <rel-delay> minimum <min-delay> sync <sync-delay> | preempt delay sync <sync-delay> minimum <min-delay> reload <rel-delay> | preempt delay reload <rel-delay> sync <sync-delay> minimum <min-delay> | preempt delay sync <sync-delay> reload <rel-delay> minimum <min-delay> | preempt delay minimum <min-delay> sync <sync-delay> reload <rel-delay> | preempt delay reload <rel-delay> sync <sync-delay> | preempt delay sync <sync-delay> reload <rel-delay> | preempt delay minimum <min-delay> sync <sync-delay> | preempt delay sync <sync-delay> minimum <min-delay> | preempt delay minimum <min-delay> reload <rel-delay> | preempt delay reload <rel-delay> minimum <min-delay> | preempt delay minimum <min-delay> | preempt delay reload <rel-delay> | preempt delay sync <sync-delay> | preempt | no preempt | no preempt delay [ { minimum [ <min-delay> ] [ [ reload [ <rel-delay> ] ] [ sync [ <sync-delay> ] ] | [ sync [ <sync-delay> ] ] [ reload [ <rel-delay> ] ] ] | reload [ <rel-delay> ] [ [ minimum [ <min-delay> ] ] [ sync [ <sync-delay> ] ] | [ sync [ <sync-delay> ] ] [ minimum [ <min-delay> ] ] ] | sync [ <sync-delay> ] [ [ reload [ <rel-delay> ] ] [ minimum [ <min-delay> ] ] | [ minimum [ <min-delay> ] ] [ reload [ <rel-delay> ] ] ] } ]

Syntax Description

Command Mode

• /exec/configure/if-eth-any/hsrp_ipv4 /exec/configure/if-eth-any/hsrp_ipv6

[no] preference max <pref-val>

Syntax Description

Command Mode

• /exec/configure/config-dhcp-guard

[no] preference min <pref-val>

Syntax Description

Command Mode

• /exec/configure/config-dhcp-guard

[ no | default ] { prefix-list <prfxlist-name> } { out | in }

Syntax Description

Command Mode

• /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-link-state /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-vpls /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

[no] priority-flow-control auto-restore multiplier { <val> }

Syntax Description

Command Mode

• /exec/configure

[no] priority-flow-control fixed-restore multiplier { <val> }

Syntax Description

Command Mode

• /exec/configure

priority-flow-control recover interface <if_list> [ qos-group <qgrp-num> ] [ module <module_idx> ] [ instance <inst> ]

Syntax Description

Command Mode

• /exec

[no] priority-flow-control watch-dog-interval { on | off }

Syntax Description

Command Mode

• /exec/configure

[no] priority-flow-control watch-dog-interval { on [ disable-action ] [ interface-multiplier <multiplier-val> ] | off }

Syntax Description