- About this Guide
-
- Information About Cisco Unified Communications Features
- Using the Cisco Unified Communication Wizard
- Configuring the Cisco Phone Proxy
- Configuring the TLS Proxy for Encrypted Voice Inspection
- Configuring Cisco Mobility Advantage
- Configuring Cisco Unified Presence
- Configuring Cisco Unified Communications Intercompany Media Engine
- Index
CLI Book 2: Cisco ASA Series Firewall CLI Configuration Guide, 9.1
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- August 14, 2014
Chapter: About this Guide
About This Guide
This preface introduces Cisco ASA Series Firewall CLI Configuration Guide and includes the following sections:
- Document Objectives
- Related Documentation
- Conventions
- Obtaining Documentation and Submitting a Service Request
Document Objectives
The purpose of this guide is to help you configure the firewall features for ASA using the command-line interface. This guide does not cover every feature, but describes only the most common configuration scenarios.
You can also configure and monitor the ASA by using ASDM, a web-based GUI application. ASDM includes configuration wizards to guide you through some common configuration scenarios, and online help for less common scenarios.
This guide applies to the Cisco ASA series. Throughout this guide, the term “ASA” applies generically to supported models, unless specified otherwise.
Related Documentation
For more information, see Navigating the Cisco ASA Series Documentation at http://www.cisco.com/go/asadocs.
Conventions
This document uses the following conventions:
Tip
Means the following information will help you solve a problem.
Means
reader be careful. In this situation, you might perform an action that could result in equipment damage or loss of data.
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What’s New in Cisco Product Documentation.
To receive new and revised Cisco technical content directly to your desktop, you can subscribe to the What’s New in Cisco Product Documentation RSS feed. The RSS feeds are a free service.
Feedback