The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Cisco 8000 Series Routers, Release 25.1.2
Cisco 8000 Series Routers, Release 25.1.2
Cisco IOS XR Release 25.1.2 is an extended maintenance release of Cisco IOS XR Release 25.1.1 for Cisco 8000 Series routers. There are no new software features or hardware introduced in this release.
For more details on the Cisco IOS XR release model and associated support, see Software Lifecycle Support Statement - IOS XR.
There is no new software features introduced in this release.
There is no new hardware introduced in this release.
There are no changes in behavior.
Table 1. Open issues for Cisco 8000 Series Routers, Release 25.1.2
Description |
|
[8011-4G24Y4H-I] QoS configuration fails after deleting interfaces and performing rollback |
|
[8011-4G24Y4H-I] Flowspec IPv6 policer fails to function correctly after interface deletion and rollback |
There are no known issues in this release.
Compatibility Matrix for EPNM and Crosswork with Cisco IOS XR Software
The compatibility matrix lists the version of EPNM and Crosswork that are supported with Cisco IOS XR software in this release.
Table 2. Compatibility matrix for Cisco 8000 Series Routers, Release 25.1.2
Cisco IOS XR |
Crosswork |
EPNM |
Release 25.1.2 |
Upgrade and downgrade paths
To view all supported Cisco IOS XR Software upgrades from the current version according to the support data installed on the running system, enter the show install upgrade-matrix running command:
Router# show install upgrade-matrix running
Matrix: XR version: 25.1.2, File version: 1.0, Version: N/A
The upgrade matrix indicates that the following system upgrades are supported from the current XR version:
From To Restrictions
---------- ---------- ------------
25.1.2 24.1.1 -
25.1.2 24.1.2 -
25.1.2 24.2.11 -
25.1.2 24.2.2 -
25.1.2 24.2.21 -
25.1.2 24.3.1 -
25.1.2 24.3.2 -
25.1.2 24.3.20 -
25.1.2 24.4.1 -
25.1.2 25.1.1 -
25.1.2 7.11.2 -
25.1.2 7.11.21 -
Add the from and to versions to the end of the CLI command, for data on versions with additional restrictions
For example, to display restrictions for the 25.1.2->24.1.1 upgrade, use
'show install upgrade-matrix running 25.1.2 24.1.1'
Software version
Log in to the router and enter the show version command:
Cisco IOS XR Software, Version 25.1.2 LNT
Copyright (c) 2013-2025 by Cisco Systems, Inc.
Build Information:
Built By : cisco
Built On : Wed Jul 02 22:34:13 UTC 2025
Build Host : iox-ucs-1001
Workspace : /auto/srcarchive12/prod/25.1.2/8000-aarch64/ws
Version : 25.1.2
Label : 25.1.2-iso
cisco 8000 (CN9130H board )
cisco 8011-4G24Y4H-I (CN9130H board ) processor with 16GB of memory
Gln_PE1 uptime is 57 minutes
Cisco 8011 Series Fixed 1RU Router 4x100G, 24x1/10/25G, 4xCu
Table of supported hardware components and the minimum required software versions.
Table 3. Supported hardware for Cisco 8010 Series Routers
Part Number |
Description |
Support Initially Provided in IOS XR Release |
Cisco 8010 Series Routers - Chassis |
||
8011-4G24Y4H-I |
Cisco 8010 1 RU Fixed System - 4 QSFP28 100GbE, 24 SFP28 25GbE, and 4 RJ-45 100MbE |
Release 25.1.1 |
Cisco 8010 Series Routers – Power Supply Unit (PSU) |
||
PWR-400-AC |
Cisco 400W AC Power Module |
Release 25.1.1 |
PWR-400-DC |
Cisco 400W DC Power Module |
Release 25.1.1 |
Table 4. Supported hardware for Cisco 8200 Series Routers
Part Number |
Description |
Support Initially Provided in IOS XR Release |
Cisco 8200 Series Routers - Chassis |
||
8201-SYS |
Cisco 8200 1 RU Fixed System - 24 QSFP56-DD 400GbE and 12 QSFP28 100GbE |
Release 7.0.12 |
8202-SYS |
Cisco 8200 2 RU Fixed System - 12 QSFP56-DD 400GbE and 60 QSFP28 100GbE |
Release 7.3.1 |
8201-32FH |
Cisco 8200 1 RU Fixed System - 32 QSFP56-DD 400GbE |
Release 7.3.15 |
8201-24H8FH |
Cisco 8200 1 RU Fixed System - 8 QSFP56-DD 400GbE and 24 QSFP28 100GbE |
Release 7.7.1 |
8202-32FH-M |
Cisco 8200 2 RU Fixed System - 32 QSFP56-DD 400GbE with MACsec |
Release 7.5.2 |
8212-48FH-M |
Cisco 8200 2 RU Fixed System - 24 QSFP-DD 800G or 48 QSFP56-DD 400GbE with MACsec |
Release 24.3.1 |
Cisco 8200 Series Routers – Power Supply Unit (PSU) |
||
PSU1.4KW-ACPI |
Cisco 1.4KW AC Power Module with Port-side Air Intake |
Release 7.0.12 |
PSU1.4KW-ACPE |
Cisco 1.4KW AC Power Module with Port-side Air Exhaust |
Release 7.0.12 |
PSU2KW-ACPI |
Cisco 2KW AC Power Module with Port-side Air Intake |
Release 7.3.1 |
PSU2KW-ACPE |
Cisco 2KW AC Power Module with Port-side Air Exhaust |
Release 7.3.1 |
PSU3KW-HVPI |
Cisco 3KW HV AC/DC Power Supply Unit |
Release 7.5.3 |
Table 5. Supported hardware for Cisco 8600 Series Routers
Part Number |
Description |
Support Initially Provided in IOS XR Release |
Cisco 8600 Series Routers - Chassis |
||
8608 |
Cisco 8600 7 RU Centralized System |
Release 7.10.1 |
Cisco 8600 Series Routers - Modular Port Adapters (MPA) |
||
86-MPA-14H2FH-M |
Cisco 8608 MPA - 2 QSFP-DD 400GbE and 14 QSFP / 16 QSFP 100GbE |
Release 7.10.1 |
86-MPA-24Z-M |
Cisco 8608 MPA - 24 SFP56 10/25/50 GbE |
Release 7.10.1 |
86-MPA-4FH-M |
Cisco 8608 MPA - 4 QSFP-DD 400GbE |
Release 7.10.1 |
Cisco 8600 Series Routers – Power Supply Unit (PSU) |
||
PSU3.2KW-ACPI |
Cisco 3.2-kW AC Power Supply Unit |
Release 7.10.1 |
PSU3.2KW-DCPI |
Cisco 3.2-kW DC Power Supply Unit |
Release 7.10.1 |
PSU4.3KW-HVPI |
Cisco 4.3KW HV AC/DC Power Supply Unit |
Release 7.10.1 |
Table 6. Supported hardware for Cisco 8700 Series Routers
Part Number |
Description |
Support Initially Provided in IOS XR Release |
Cisco 8700 Series Routers - Chassis |
||
8711-32FH-M |
Cisco 8700 1 RU Fixed System - 16 QSFP-DD800 and 16 QSFP56-DD |
Release 24.3.1 |
8712-MOD-M |
Cisco 8700 2 RU Fixed System |
Release 24.4.1 |
Cisco 8700 Series Routers - Modular Port Adapters (MPA) |
||
8K-MPA-4D |
Cisco 8712 MPA - 4 QSFP-DD 400GbE |
Release 24.4.1 |
8K-MPA-16H |
Cisco 8712 MPA - 16 QSFP-28 100GbE |
Release 24.4.1 |
8K-MPA-16Z2D |
Cisco 8712 MPA - 2 QSFP-DD 400GbE, 2 QSFP-DD 200GbE, and 16 SFP 50GbE |
Release 24.4.1 |
8K-MPA-18Z1D |
Cisco 8712 MPA - 1 QSFP-DD 400 GbE and 18 zSFP56+ 50GbE |
Release 25.1.1 |
Cisco 8700 Series Routers – Power Supply Unit (PSU) |
||
PSU2KW-ACPI |
Cisco 8711-32FH-M PSU – 2KW AC Power Module with Port-side Air Intake |
Release 24.3.1 |
PSU2KW-ACPE |
Cisco 8711-32FH-M PSU – 2KW AC Power Module with Port-side Air Exhaust |
Release 24.3.1 |
PSU2KW-DCPI |
Cisco 8711-32FH-M PSU – 2KW DC Power Module with Port-side Air Intake |
Release 24.3.1 |
PSU2KW-DCPE |
Cisco 8711-32FH-M PSU – 2KW DC Power Module with Port-side Air Exhaust |
Release 24.3.1 |
PSU2KW-DCPI |
Cisco 8712-MOD-M PSU – 2KW 48V DC Power Module with Port-side Air Intake |
Release 24.4.1 |
PSU2KW-DCPE |
Cisco 8712-MOD-M PSU – 2KW 48V DC Power Module with Port-side Exhaust |
Release 24.4.1 |
PSU2KW-ACPI |
Cisco 8712-MOD-M PSU – 2KW AC Power Module with Port-side Air Intake |
Release 24.4.1 |
PSU2KW-ACPE |
Cisco 8712-MOD-M PSU – 2KW AC Power Module with Port-side Exhaust |
Release 24.4.1 |
Table 7. Supported hardware for Cisco 8800 Series Routers
Part Number |
Description |
Support Initially Provided in IOS XR Release |
Cisco 8800 Series Routers - Chassis |
||
8804-SYS |
Cisco 8800 Modular System - 10 RU with 4 Line Card Slots |
Release 7.3.2 |
8808-SYS |
Cisco 8800 Modular System - 16 RU with 8 Line Card Slots |
Release 7.0.12 |
8812-SYS |
Cisco 8800 Modular System - 21 RU with 12 Line Card Slots |
Release 7.0.12 |
8818-SYS |
Cisco 8800 Modular System - 33 RU with 18 Line Card Slots |
Release 7.0.14 |
Cisco 8800 Series Routers - Route Processors |
||
8800-RP |
Cisco 8800 Route Processor - 4 Core |
Release 7.0.12 |
8800-RP2 |
Cisco 8800 Route Processor - 8 Core |
Release 7.11.1 |
Cisco 8800 Series Routers - Fabric Modules |
||
8808-FC |
Cisco 8808 System Fabric Module - Q100-based fabric modules with 14.4T per LC slot |
Release 7.0.12 |
8812-FC |
Cisco 8812 System Fabric Module - Q100-based fabric modules with 14.4T per LC slot |
Release 7.0.12 |
8818-FC |
Cisco 8818 System Fabric Module - Q100-based fabric modules with 14.4T per LC slot |
Release 7.0.14 |
8808-FC0 |
Cisco 8808 System Fabric Module - Q200-based fabric modules with 14.4T per LC slot |
Release 7.3.15 |
8818-FC0 |
Cisco 8818 System Fabric Module - Q200-based fabric modules with 14.4T per LC slot |
Release 7.3.16 |
8804-FC0 |
Cisco 8804 System Fabric Module - Q200-based fabric modules with 14.4T per LC slot |
Release 7.3.16 |
8808-FC1 |
Cisco 8808 System Fabric Module - F100-based fabric modules with 28.8T per LC slot |
Release 24.2.1 |
8804-FC1 |
Cisco 8804 System Fabric Module - F100-based fabric modules with 28.8T per LC slot |
Release 25.1.1 |
Cisco 8800 Series Routers - Line Cards |
||
8800-LC-48H |
Cisco 8800 Line Card with MACsec - Q100 ASIC based 4.8 Tbps line card |
Release 7.0.12 |
8800-LC-36FH |
Cisco 8800 Line Card - Q100 ASIC based 14.4 Tbps line card |
Release 7.0.12 |
88-LC0-36FH |
Cisco 8800 Line Card - Q200 ASIC based 14.4 Tbps line card |
Release 7.3.15 |
88-LC0-36FH-M |
Cisco 8800 Line Card with MACsec- Q200 ASIC based 14.4 Tbps line card |
Release 7.3.15 |
88-LC0-34H14FH |
Cisco 8800 Line Card - Q200 ASIC based 9 Tbps line card |
Release 7.3.3 |
88-LC1-36EH |
Cisco 8800 Line Card - P100 ASIC based 28.8 Tbps line card |
Release 24.2.11 |
88-LC1-12TH24FH-E |
Cisco 8800 Line Card - P100 ASIC based 12 Tbps line card |
Release 24.3.1 |
88-LC1-52Y8H-EM |
Cisco 8800 Line Card - P100 ASIC based 3.7 Tbps line card |
Release 24.3.1 |
Cisco 8800 Series Routers – Power Supply Unit (PSU) |
||
PSU4.8KW-DC100 |
4.8KW 48V 100A DC Power Supply |
Release 7.3.2 |
PSU6.3KW-HV |
6.3KW AC/HVAC/HVDC Power Supply |
Release 7.0.12 |
PSU6.3KW-20A-HV |
6.3KW AC/HVAC/HVDC Power Supply-20A |
Release 7.0.12 |
Overview of Cisco IOS XR software
The Cisco IOS XR software is composed of a base image (ISO) that provides the XR infrastructure. The ISO image is made up of a set of packages (also called RPMs). These packages are of three types:
● A mandatory package that is included in the ISO
● An optional package that is included in the ISO
● An optional package that is not included in the ISO
Visit the Cisco Software Download page to download the Cisco IOS XR software images.
View installed software packages
To determine the Cisco IOS XR Software packages installed on your router, log in to the router and enter the show install active command. To view the optional and bug fix RPM packages, first install the package and use the show install active summary command.
To know about all the RPMs installed including XR, OS and other components use the show install active all command.
Flexible software modularity
The software modularity approach provides a flexible model that allows you to install a subset of IOS XR packages on devices based on your individual requirements. All critical components are modularized as packages so that you can select the features that you want to run on your router.
Determine firmware support
To determine firmware support on your router, log in to the router and enter show fpd package command.
Table 8. Related resources
Resource |
Description |
Provides information about Smart Licensing Using Policy solutions and their deployment on IOS XR routers. |
|
Provides CDC documentation for Cisco 8000 series routers. |
|
Allows searching by product family, product ID, data rate, reach, cable type, or form factor to determine the transceivers that Cisco hardware device supports. |
|
Allows searching by release number, error strings, or comparing release numbers to view a detailed repository of error messages and descriptions. |
|
Allows selecting the MIB of your choice from a drop-down to explore an extensive repository of MIB information. |
|
Provides yang data models introduced and enhanced in every IOS XR release. |
|
Provides a general guide in case of upgrading IOS XR routers or new deployments that involve IOS XR routers. |
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2025 Cisco Systems, Inc. All rights reserved.