MPLS Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 7.6.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: March 30, 2022

New and Changed MPLS Features

This table summarizes the new and changed feature information for the Cisco ASR 9000 Series Aggregation Services Router MPLS Configuration Guide and tells you where they are documented.

New and Changed MPLS Feature Information

Table 1. New and Changed Features
Feature	Description	Changed in Release	Where Documented
Autoroute Tunnel as Designated Path	With this feature, you can exclusively specify an autoroute tunnel to forward traffic to a particular tunnel destination address without considering the IS-IS metric for traffic path selection.	Release 7.6.2	Configure Autoroute Tunnel as Designated Path

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)