Technical Specifications

This appendix lists the specifications for the VSM card for the Cisco ASR 9000 Series Aggregation Services Router.

The specifications are presented in the following tables:

Table A-1 , “Cisco ASR9000 VSM Card Ordering Information”

Table A-2 , “Cisco ASR 9000 Series Environmental Specifications”

Table A-3 , “Card and Fan Tray Power Consumption Specifications”

Table A-4 , “VSM Card Technical Specifications”

Table A-1 provides ordering information for the Cisco ASR 9000 Virtualized Services Module (VSM) Card.

Table A-1 Cisco ASR9000 VSM Card Ordering Information
Product Name
Part Number

Cisco ASR 9000 Virtualized Services Module (VSM) Card

A9K-VSM-500(=)

Cisco ASR9000 CGN License (1 per 5 million translations)1

A9K-XLAT-LIC-5M(=)

Virtual Machine License for Cisco ASR 9000 Router

A9K-VM-LIC(=)

1.In IOS XR Release 5.1.1, the user must select at least one unit of CGN license. Up to sixteen units of CGN license (1 per 5 million translations) supported per Cisco ASR 9000 Virtualized Services Module (VSM) Card.

 

Table A-2 lists the environmental specifications for the Cisco ASR 9000 Series Router.

 

 

Table A-2 Cisco ASR 9000 Series Environmental Specifications

Description
Value

Operating Temperature:

41 degrees to 104 degrees F
(5 degrees to 40 degrees C)

Operating Temperature (Short term)2:

23 degrees to 131 degrees F
(–5 degrees to 55 degrees C)3

Nonoperating Temperature

–4 degrees to 149 degrees F
(–20 degrees to 65 degrees C)

Humidity

Operating: 10 to 85 percent noncondensing

Nonoperating: 5 to 95 percent noncondensing

Altitude

Operating: 0 to 13,000 ft (0 to 4,000 m)

Nonoperating: 0 to 15,000 ft (0 to 4,570 m)

Power Dissipation (Cisco ASR 9010 Router)

7600 W maximum

Power Dissipation (Cisco ASR 9006 Router)

4556 W maximum

Acoustic noise

78 dB at 80.6 degrees F (27 degrees C) maximum

Shock

Operating (halfsine): 21 in/sec (0.53 m/sec)

Nonoperating (trapezoidal pulse): 20 G4, 52 in/sec (1.32 m/sec)

Vibration

Operating: 0.35 Grms5 from 3 to 500 Hz

Nonoperating: 1.0 Grms from 3 to 500 Hz

2.Short-term refers to a period of not more than 96 consecutive hours and a total of no more than 15 days in 1 year. (This refers to a total of 360 hours in any given year, but no more than 15 occurrences during that 1-year period.).

3.Operating temperature specifications for the router will differ from those listed in this table when 40-port Gigabit Ethernet line cards using GLC-GE-100FX SFP transceiver modules are installed in the router. This is due to the lower temperature specifications of the SFP module. Please contact a Cisco representative for more information.

4.G is a value of acceleration, where 1G equals 32.17 ft/sec2 (9.81 m/sec2).

5.Grms is the root mean square value of acceleration.

Table A-3 lists the power consumption specifications for the RSP card, line cards, and fan tray.

caut.gif
Caution blank.gif Be sure that the chassis configuration complies with the required power budgets. Failure to properly verify the configuration may result in an unpredictable state if one of the power units fails. Contact your local sales representative for assistance.

 

Table A-3 Card and Fan Tray Power Consumption Specifications
Description
Value
RSP Card

Power consumption

170 W at 86 degrees F (30 degrees C)

195 W at 104 degrees F (40 degrees C)

205 W at 131 degrees F (55 degrees C)

VSM Card

Power consumption

750 W at 86 degrees F (30 degrees C)

800 W at 104 degrees F (40 degrees C)

850 W at 131 degrees F (55 degrees C)

Fan Tray

Power consumption

160 W at 86 degrees F (30 degrees C)

300 W at 104 degrees F (40 degrees C)

475 W at 131 degrees F (55 degrees C)

Table A-4 lists the technical specifications for the VSM card.

 

Table A-4 VSM Card Technical Specifications
Description
Value

Height

14 in (35.56 cm)

Width

1.72 in (4.37 cm)

Depth

20.5 in (52.07 cm)

Weight

21.2 lb (9.6 kg)