Cisco VG450 Voice Gateway Hardware Installation Guide

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: November 5, 2018

Chapter: Configuration Methods

Configuration Methods

Configuration Methods

After the Cisco VG450 Voice Gateway is operational, use the procedures described in the Cisco Voice 450 Gateway Software Configuration Guide to configure specific services and functions, or to make changes to an existing configuration.

You can configure the Cisco VG450 Voice Gateway by one of the following methods:

System configuration dialog
Configuration mode: Cisco IOS software CLI
Setup command facility: Remote configuration through a LAN
SNMP-based application: CiscoView or HP OpenView
HTTP-based configuration server: Provides access to the CLI from a web browser

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)