|
|
May 2010 |
- Added the section “Flexible Protection Mechanism” in the chapter “Transponder and Muxponder Cards”.
- Updated the table “Single-Mode Fiber XFP Port Cabling Specifications” in the appendix “Hardware Specifications”.
|
June 2010 |
- Updated the table “ONS 15454 Security Levels—Node View” in the chapter “Security Reference”.
|
July 2010 |
- Updated the table “SFP/XFP Card Compatibility” in the chapter “Transponder and Muxponder Cards”.
- Updated the section “40G-MXP-C Card Specifications” in the appendix “Hardware Specifications”.
- Updated the sub-section “Key Features” under the section “40G-MXP-C Card” in the chapter “Transponder and Muxponder Cards”.
- Updated the following sections:
– Updated the key features for the MXP_MR_10DME card in the chapter, Transponder and Muxponder Cards. – Updated the section, Y-cable protection in the chapter, Transponder and Muxponder Cards. |
August 2010 |
- Updated the table “Node View (Single-Shelf Mode) or Shelf View (Multishelf Mode) Tabs and Subtab” in the chapter, “Cisco Transport Controller Operation”.
- Updated the tables “SFP Specifications” and “Single-Mode Fiber SFP Port Cabling Specifications” in the appendix “Hardware Specifications”.
|
September 2010 |
- Updated the table “SFP/XFP Card Compatibility” in the chapter “Transponder and Muxponder Cards”.
- Updated the “OTU2_XP Card” section in the Chapter “Transponder and Muxponder Cards”.
- Added the FAPS switching criteria in the section, “Layer 2 Over DWDM Protection” in the chapter, “Transponder and Muxponder Cards”.
|
October 2010 |
- Updated the "Class 1M Laser Product Statement" section in the chapters “Optical Amplifier Cards”, “Multiplexer and Demultiplexer Cards”, “Optical Add/Drop Cards”, “Reconfigurable Optical Add/Drop Cards”, and “Transponder and Muxponder Cards”.
- Updated the table “Internal Patchcord Ports” in the chapter “Optical Channel Circuits and Virtual Patchcords Reference”.
|
November 2010 |
- Updated the “SFP/XFP Card Compatibility” table in the “Transponder and Muxponder Cards” chapter with a new footnote.
- Updated the section, “SNMP in Multishelf Management” in the chapter, SNMP.
- Updated the width of the single slot cards for Control cards and Transponder and Muxponder Cards in the appendix, "Hardware Specifications".
- Updated the table “SFP/XFP Card Compatibility” in the chapter “Transponder and Muxponder Cards”.
- Updated the tables “SFP Specifications” and “Single-Mode Fiber SFP Port Cabling Specifications” in the appendix, “Hardware Specifications”.
|
December 2010 |
- Updated the table "ONS 15454 Security Levels—Node View" in the chapter "Security Reference".
|
January 2011 |
- Updated the width of all the cards in the appendix, "Hardware Specifications".
- Updated the section “40G-MXP-C Card” and the table “40G-MXP-C Card Port-Level Indicators” i nthe chapter “Transponder and Muxponder Cards”.
|
March 2011 |
- Removed the table “8G Fibre Channel (FC) Payload PMs for the 40G-MXP-C Card” in the chapter, “Performance Monitoring”.
|
April 2011 |
- Updated the section “Interllink Interfaces” and the table “SFP/XFP Card Compatibility” in the chapter “Transponder and Muxponder Cards”.
- Updated the table, “XFP Specifications” in the chapter, “Hardware Specifications”.
- Updated the section “Safety Labels” in the following chapters:
– Common Control Cards – Optical Service Channel Cards – Optical Amplifier Cards – Multiplexer and Demultiplexer Cards – Tunable Dispersion Compensating Units – Optical Add/Drop Cards – Reconfigurable Optical Add/Drop Cards – Transponder and Muxponder Cards
- Updated the section “Node View (Multishelf Mode), Node View (Single-Shelf Mode), and Shelf View (Multishelf Mode)” in the chapter “Cisco Transport Controller Operation”.
- Updated the section “SFP and XFP Modules” in the chapter “Transponder and Muxponder Cards”.
- Updated the power values in the “Individual Card Power Requirements” table in the appendix, “Hardware Specifications”.
|
May 2011 |
- Updated the section “SFP and XFP Modules” in the chapter “Transponder and Muxponder Cards”.
- Removed the sections “SFP Specifications” and “XFP Specifications” and added the section “SFP and XFP Specifications” in the appendix “Hardware Specifications”.
- Updated the minimum output power value for the MXP_MR_10DMEX_C card in the appendix “Hardware Specifications”.
|
June 2011 |
- Updated the section “Y-Cable Protection” in the chapter “Transponder and Muxponder Cards”.
- Updated the sections “MXP_2.5G_10EX_C Card Specifications” and “TXP_MR_10EX_C Card Specifications” in the chapter “Hardware Specifications”.
- Updated the TNC and TSC card power consumption values in Table A-1 in the chapter “Hardware Specifications”.
|
July 2011 |
- Added a note in the “PC and UNIX Workstation Requirements” section of Chapter, “Cisco Transport Controller Operation”.
|
August 2011 |
- Updated the sub-section “Configuration Management” under the section “OTU2_XP Card” in the chapter “Transponder and Muxponder Cards”.
- Updated the section “40G-MXP-C Card” in the chapter “Transponder and Muxponder Cards”.
|
September 2011 |
- Updated the key features section of TXP_MR_10G, TXP_MR_10E, TXP_MR_10E_C, TXP_MR_10E_L, TXP_MR_10EX_C, and OTU2_XP cards in the chapter “Transponder and Muxponder Cards”.
- Added a note to SONET PM Parameters table in “SONET PM Parameter Definitions” section.
- Replaced G.975.1 with G.975.1 I.7 and added a note in the "Enhanced FEC (E-FEC) Feature" section in the chapter, "Transponder and Muxponder Cards".
- Created a “Summary Pane” section in the chapter, “Cisco Transport Controller Operation”.
|
October 2011 |
- Removed the Temperature table and updated the Temperature section with standard operating temperature values, removed the Environmental section from all the 15454 card specifications, and added "Environmental Exception" to “40G-MXP-C Card Specifications” section in the appendix "Hardware Specifications."
|
December 2011 |
- Updated the power values in the table “Individual Card Power Requirements” in the appendix “Hardware Specifications”.
- Updated the section “Termination Modes” in the chapter “Transponder and Muxponder Cards”.
|
January 2012 |
- Updated the section “GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE Cards” with pluggable limitations in the chapter Transponder and Muxponder Cards”.
|
February 2012 |
- Removed the autonegotiation support statement for ADM-10G card from the “Key Features” section in the chapter “Transponder and Muxponder Cards”.
|
March 2012 |
- Updated the section, “Multishelf Node” in the chapter, “ Node Reference”.
|
April 2012 |
- Updated the “Functional View for an Eight-Sided Node” diagram in the chapter “Node Reference”.
- Added a note in the “Displaying Optical Power” section of chapter, “Node Reference”.
- Updated the "Faceplate and Block Diagram" section of "GE_XP, 10GE_XP, GE_XPE, and 10GE_XPE Cards" in the chapter, “Transponder and Muxponder Cards”.
- Upadted the section “SNMP in Multishelf Management” in the chapter “SNMP”.
|
May 2012 |
Updated the section “Optical Channel Circuits” in the chapter “Optical Channel Circuits and Virtual Patchcords Reference”. |
June 2012 |
Updated the section “Generic Threshold and Performance Monitoring MIBs” in the chapter “SNMP”. |
July 2012 |
Document Part Number revisioned to 78-19285-02 and a full length book-PDF was generated. |
August 2012 |
- Updated the table “Platform and Software Release Compatibility for Control Cards” in the chapter “Common Control Cards”.
- Updated the section “TCC2P Card” in the chapter “Install the Control cards” and “Supported Node Configurations for OPT-RAMP-C and OPT-RAMP-CE Cards” in the chapter “Node Reference”.
- Updated the power values in the “Individual Card Power Requirements” table in the appendix, “Hardware Specifications”.
|
October 2012 |
- Updated the “Circuit Provisioning” section of ADM-10G card in the chapter “Transponder and Muxponder Cards”.
- Updated the section “TCC2P Card” in the chapter “Install the Control cards”.
- Added a caution to the section, “IP Addressing with Secure Mode Enabled” in the chapter, “Management Network Connectivity”.
|
December 2012 |
- Updated the "TCC2/TCC2P/TCC3/TNC/TSC Card Reset" section in the chapter, "Cisco Transport Controller Operation".
- Renamed chapter "Management Network Connectivity" to "Manage Network Connectivity".
|
February 2013 |
- In the chapter “Transponder and Muxponder Cards,” added a note after “Table 10-44 Supported SDH Circuit Sizes of ADM-10G card on ONS 15454 SDH”.
- In the chapter “Cisco Transport Controller Operation,” added a new column to Table 14-1 JRE Compatibility to reflect the compatibility of releases with JRE 1.7.
|
April 2013 |
Updated the section “External Firewalls” in the chapter “Manage Network Connectivity”. |
May 2013 |
Updated the section, “ REP Limitations and Restrictions” in the chapter, “ Transponder and Muxponder Cards”. |
June 2013 |
Updated the section “Administrative States” in the chapter “Administrative and Service States”. |
October 2013 |
Created a new table "Revision Number Compatibility for Transponder and Muxponder Cards " in the chapter, “Transponder and Muxponder Cards”. |
November 2013 |
Updated the section “Trunk Interface” of OTU2_XP card in the chapter “Transponder and Muxponder Cards”. |