CLR Commands
This chapter provides CLR (clear) commands for the Cisco ONS 15454, ONS 15327, ONS 15600 and ONS 15310-CL.
6.1 CLR-COND-SECU
Clear Security Condition
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL
This command clears the specified standing condition.
Note In Release 6.0, only INTRUSION-PSWD parameter value is supported.
Category
Security
Security
Superuser
Related Commands
ACT-USER ALW-MSG-SECU ALW-USER-SECU CANC CANC-USER CANC-USER-SECU DLT-USER-SECU ED-CMD-SECU ED-PID ED-USER-SECU ENT-USER-SECU INH-MSG-SECU INH-USER-SECU REPT ALM <MOD2ALM> REPT ALM BITS REPT ALM COM |
REPT ALM ENV REPT ALM EQPT REPT ALM SECU REPT ALM SYNCN REPT EVT <MOD2ALM> REPT EVT BITS REPT EVT COM REPT EVT ENV REPT EVT EQPT REPT EVT FXFR REPT EVT IOSCFG REPT EVT SECU REPT EVT SESSION REPT EVT SYNCN RTRV-ALM-<MOD2ALM> |
RTRV-ALM-ALL RTRV-ALM-BITS RTRV-ALM-ENV RTRV-ALM-EQPT RTRV-ALM-SYNCN RTRV-CMD-SECU RTRV-COND-<MOD2ALM> RTRV-COND-ALL RTRV-COND-BITS RTRV-COND-ENV RTRV-COND-EQPT RTRV-COND-SYNCN RTRV-DFLT-SECU RTRV-USER-SECU SET-ATTR-SECUDFLT |
Input Formats
CLR-COND-SECU:[<TID>]::<CTAG>[::<SECUALMTYPE>];
Input Examples
CLR-COND-SECU:CISCO::123::INTRUSION-PSWD:
Input Parameters
Table 6-1 CLR-COND-SECU Input Parameters
|
|
SECUALMTYPE |
Secure alarm type. Defaults to INTRUSION-PSWD Parameter type is SECUALMTYPE—security alarm type |
•INTRUSION-PSWD |
Condition raised after an invalid password is used during login. Condition is raised only if the password is used a specified number of times. |