APPLY Commands
This chapter provides APPLY (apply) commands for the Cisco ONS 15454, ONS 15327, ONS 15600 and ONS 15310-CL.
3.1 APPLY
Apply
Usage Guidelines
Cisco ONS 15454, ONS 15327, ONS 15600, ONS 15310-CL
This command activates or reverts a software load during a software upgrade or downgrade process.
Note An error will be generated if you attempt to activate an older software load or attempt to revert to a newer software load.
Category
File Transfer
Security
Superuser
Related Commands
Input Format
APPLY:[<TID>]::<CTAG>[::<MEM_SW_TYPE>];
Input Example
APPLY:CISCO::123::ACT;
Input Parameters
<MEM_SW_TYPE> |
(Optional) Memory switch action during the software upgrade. The parameter type is DL_TYPE, which indicates the software download type. The default value is ACT. |
•ACPT |
(ONS 15600) Activates to a newer software load on the active controller card and resets the active card. |
•CANC |
(ONS 15600) Cancels the software download. |
•RVRT |
Reverts to an older software load during software download. |
•ACT |
Activates to a new software load. (For ONS 15600, the new software load is activated on the standby controller card only). |