Segment Routing Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR 6.2.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: May 24, 2018

Chapter: New and Changed Information for Segment Routing Features

New and Changed Information for Segment Routing Features
New and Changed Information

New and Changed Information for Segment Routing Features

This table summarizes the new and changed feature information for the Segment Routing Configuration Guide for Cisco NCS 5500 Series Routers, and lists where they are documented.

New and Changed Information

Table 1. New and Changed Features
Feature	Description	Introduced/Changed in Release	Where Documented
IS-IS Multi-Domain Prefix SID and Domain Stitching	This feature was introduced.	Release 6.2.2	Configure Segment Routing for IS-IS Protocol
IOS XR Traffic Controller (XTC)	This feature was introduced.	Release 6.2.2	Configure IOS XR Traffic Controller (XTC)
MPLS Ping and Traceroute for Prefix-SID	This feature was introduced.	Release 6.2.2	Using Segment Routing OAM

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)