Segment Routing Configuration Guide for Cisco NCS 5000 Series Routers, IOS XR Release 6.3.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: March 27, 2018

Chapter: New and Changed Information for Segment Routing Features

New and Changed Information for Segment Routing Features
New and Changed Segment Routing Features

New and Changed Information for Segment Routing Features

This table summarizes the new and changed feature information for the Segment Routing Configuration Guide for Cisco NCS 5000 Series Routers, and lists where they are documented.

New and Changed Segment Routing Features

Segment Routing Features Added or Modified in IOS XR Release 6.3.x


Feature	Description	Introduced/Changed in Release	Where Documented
ECMP Solution for BGP Labeled Unicast	This feature was introduced.	Release 6.3.1	See Understanding the ECMP Solution for BGP Labeled Unicast and Enabling ECMP for BGP LU in the Configure Segment Routing for BGP chapter
Topology-Independent Loop-Free Alternate (TI-LFA)	This feature was introduced.	Release 6.3.1	Configure Topology-Independent Loop-Free Alternate (TI-LFA)

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)