Prerequisites for IGMP Snooping
-
Basic IGMP v3 snooping support (BISS) is supported.
-
POP operation for all vlan tags should be configured on EFP.
-
Bridge domain (BD) interfaces from 1 to 4094 support IGMP snooping.
-
Maximum number of EFPs supported on a single BD with IGMP snooping enabled: -
RSP1 is 48
-
RSP2 is 128
-
-
EFPs are supported only on different ports of a single BD, but not on the same ports on the RSP3 module.
-
Maximum number of multicast routes for Layer 2 is 1000.
-
Maximum number of multicast routes for Layer 3 (including control entries) for RSP1A, RSP1B, and RSP2 modules is 1000.
-
Maximum number of multicast routes for Layer 2 and Layer 3 for the RSP3 module is 1000.
Note |
|