Nexus Dashboard platform

Cisco Nexus Dashboard is a central management console for multiple data center fabrics that provides real-time analytics, visibility, assurance for network policies and operations, as well as policy orchestration for the data center fabrics, such as Cisco ACI and NX-OS.

Nexus Dashboard is the comprehensive management solution for ACI as well as NX-OS deployments spanning LAN fabric, SAN fabric, and IP Fabric for Media (IPFM) networks in data centers powered by Cisco. Nexus Dashboard also supports other devices, such as IOS-XE switches, IOS-XR routers, and non-Cisco devices. Being a multi-fabric controller, Nexus Dashboard manages multiple deployment models such as VXLAN EVPN, classic 3-tier LAN, FabricPath, and routed-based fabrics for LAN while providing ready-to-use control, management, monitoring, and automation capabilities for all these environments. In addition, Nexus Dashboard, when you select SAN installation, Cisco Nexus Dashboard automates Cisco MDS switches and Cisco Nexus-family infrastructure in NX-OS mode with a focus on storage-specific features and analytics capabilities.

Note	This document describes how to deploy a Nexus Dashboard cluster initially and onboard the fabrics. After your cluster is up and running, see the Nexus Dashboard configuration and operation articles for day-to-day operation.

Unified Nexus Dashboard deployment

Previous release of Nexus Dashboard 3.x shipped platform software and all of its software in a unified packaging form. Management and Insights of fabrics were still two independent pieces that were not unified. Now, the platform and the individual services have been unified into a single product. You no longer deploy and configure the services separately.

Note

Depending on the cluster format and the number of cluster nodes that you have deployed, certain features (such as controller, orchestrator, or telemetry) might not be available in Nexus Dashboard release 4.1.1. Review the information in the Nexus Dashboard Capacity Planning tool to verify what features would be available for your cluster installation.

Hardware vs software stack

Nexus Dashboard is offered as a cluster of specialized Cisco UCS servers (Nexus Dashboard platform) with the software framework (Nexus Dashboard) pre-installed on it. The Cisco Nexus Dashboard software stack can be decoupled from the hardware and deployed in a number of virtual form factors. For the purposes of this document, we will use "Nexus Dashboard hardware" specifically to refer to the hardware and "Nexus Dashboard" to refer to the software stack and the GUI console.

This guide describes the initial deployment of the Nexus Dashboard software, which is common for physical and virtual form factors. If you are deploying a physical cluster, see Nexus Dashboard Hardware Setup Guide for the UCS servers' hardware overview, specification, and racking instructions.

Note

Root access to the Nexus Dashboard software is restricted to Cisco TAC only. A special user rescue-user is created for all Nexus Dashboard deployments to enable a set of operations and troubleshooting commands. For additional information about the available rescue-user commands, see the "Troubleshooting" article in the Nexus Dashboard documentation library.

Available form factors

This release of Cisco Nexus Dashboard can be deployed using a number of different form factors. However, you must use the same form factor for all nodes, mixing nodes of different form factors within the same cluster is not supported. The physical form factor currently supports three different Cisco UCS servers (SE-NODE-G2, ND-NODE-L4, and ND-NODE-G5S). You can mix SE-NODE-G2 and ND-NODE-L4 servers in the same cluster, but you cannot mix a ND-NODE-G5S server in the same cluster as SE-NODE-G2 and ND-NODE-L4 servers.

• Physical appliance (.iso) – This form factor refers to the Cisco UCS physical appliance hardware with the Nexus Dashboard software stack pre-installed on it.

  The later sections in this document describe how to configure the software stack on the existing physical appliance hardware to deploy the cluster. Setting up the Nexus Dashboard hardware is described in Nexus Dashboard Hardware Setup Guide for the specific UCS model.

• Virtual Appliance – The virtual form factor allows you to deploy a Nexus Dashboard cluster using VMware ESX (.ova) or RHEL KVM (.qcow2).

  The virtual form factor supports the following two profiles:

  • Data node – This profile with higher system requirements is designed for higher scale and/or unified deployment.

  • App node – This profile with lower system requirements can be deployed as secondary nodes. Can also be deployed as primary nodes but does not support unified deployment.

  In addition, beginning with Nexus Dashboard release 4.1(1), support is available for running a virtual Nexus Dashboard (vND) on the AWS public cloud. See Deploying a Virtual Nexus Dashboard (vND) in Amazon Web Services (AWS) for more information.

Note

When planning your deployment, ensure to check the list of "Prerequisites and Guidelines" in one of the following sections of this document specific to the form factor you are deploying. A quick reference of the supported form factors, scale, and cluster sizing requirements are available in the Nexus Dashboard Cluster Sizing tool.

Scale and cluster sizing guidelines

A basic Nexus Dashboard deployment typically consists of 1 or 3 primary nodes, which are required for the cluster to come up. Depending on scale requirements, 3-node or larger clusters can be extended with up to 3 additional secondary nodes to support higher scale.

• For physical clusters, you can also add up to 2 standby nodes for easy cluster recovery in case of a primary node failure.

• For virtual clusters, up to 2 standby nodes are also supported, but only with a 3-node vND (app) profile for a Controller-only or Orchestration-only deployment.

Exact number of additional secondary nodes required for your specific use case is available from the Nexus Dashboard Cluster Sizing tool.

Scale and cluster sizing limitations

These limitations apply to scale and cluster sizing:

• Single-node deployments cannot be extended to a 3-node cluster after the initial deployment.

  If you deploy a single-node cluster and want to extend it to a 3-node cluster or add secondary nodes, you will need to back it up, deploy a new 3-node base cluster, and then restore the backup on this later. For more information, see Backing Up and Restoring Your Nexus Dashboard

• Single-node deployments do not support additional secondary or standby nodes.

• For 3-node clusters, at least two primary nodes are required for the cluster to remain operational.

  For more information, see Deploying Highly Available Services with Cisco Nexus Dashboard.