show bh-erpd-mapping
To display operation status of the Backhaul eRPD mapping, use the show bh-erpd-mapping command in privileged EXEC mode.
show bh-erpd-mapping {all | | | slot | slot_id}
Syntax Description
all |
Displays the Backhaul eRPD Mapping of all line cards. |
slot slot_id |
Displays the Backhaul eRPD Mapping of the specific line card. |
Command Default
None.
Command Modes
Privileged EXEC (#) (FCC)
Command History
Release |
Modification |
---|---|
Cisco Remote PHY Shelf 7200 Software 1.1 |
This command was introduced on the Cisco Remote PHY Shelf 7200. |
Examples
The following is a sample output of the show bh-erpd-mapping command for all the line cards:
HA-Shelf-FCC# show bh-erpd-mapping all
LC 0 is not up.
LC 1 :
backhaul0 <---> erpd0
backhaul1 <---> erpd1
backhaul2 <---> erpd2
backhaul3 <---> erpd3
backhaul4 <---> erpd4
backhaul5 <---> erpd5
LC 2 is not up.
LC 3 :
backhaul0 <---> erpd0
backhaul1 <---> erpd1
backhaul2 <---> erpd2
backhaul3 <---> erpd3
backhaul4 <---> erpd4
backhaul5 <---> erpd5
LC 4 is not up.
LC 5 is not up.
LC 6 :
backhaul0 <---> erpd0
backhaul1 <---> erpd1
backhaul2 <---> erpd2
backhaul3 <---> erpd3
backhaul4 <---> erpd4
backhaul5 <---> erpd5
LC 7 is not up.
LC 8 is not up.
LC 9 :
backhaul0 <---> erpd0
backhaul1 <---> erpd1
backhaul2 <---> erpd2
backhaul3 <---> erpd3
backhaul4 <---> erpd4
backhaul5 <---> erpd5
LC 10 is not up.
LC 11 is not up.
LC 12 :
backhaul0 <---> erpd0
backhaul1 <---> erpd1
backhaul2 <---> erpd2
backhaul3 <---> erpd3
backhaul4 <---> erpd4
backhaul5 <---> erpd5