Maintaining the Cisco cBR Chassis

Powering Down the Cisco cBR Chassis

You may want to power down the chassis to perform certain tasks, including:
  • Transporting the chassis to a new location
  • Repairing or upgrading the chassis hardware
  • Mounting the chassis

Before you begin

Procedure

Step 1

Push the toggle switch on the FPEM (AC or DC) on the rear of the chassis to OFF position.

Step 2

Disconnect AC or DC power.

What to do next

Unmounting the Cisco cBR Chassis

Before you begin

Required Tools and Equipment

  • #2 Phillips screwdriver

Procedure

Step 1

Power down the chassis.

Step 2

Disconnect AC or DC power.

Step 3

Remove all external cables.

Step 4

Loosen the screws inserted into the side cable management bracket using a #2 Phillips screwdriver.

Step 5

Loosen the screws inserted into the rack mount ear on each side using a #2 Phillips screwdriver.

Step 6

Remove the chassis from the rack.

What to do next