Field Notice 12851: ONS 15454 2.2 Software Requires 15454-E100T= 800- 06747-05 A0 or Later

Available Languages

Updated:November 4, 2003

Document ID:FN12851

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Updated January 18, 2002

August 10, 2000

Products Affected

Product	Comments
15454-E100T=	800-06747-01 (All Revision) ^ASY,ELMECH,10/100BT,12 CKT,RJ45
15454-E100T=	800-06747-02 (All Revisions) ^ASY,ELMECH,10/100BT,12 CKT,RJ45
15454-E100T=	800-06747-03 (All Revisions) ^ASY,ELMECH,10/100BT,12 CKT,RJ45
15454-E100T=	800-06747-04 (All Revisions) ^ASY,ELMECH,10/100BT,12 CKT,RJ45
E100T	CE 87-31-00011 (All Revisions) 10/100BT, 12 ckt, RJ45

Problem Description

All versions of the E100T card prior to 800-06747-05 A0 will require a hardware upgrade to support features introduced in version 2.2 CTC (Cisco Transport Controller) and later.

Background

The 15454-E100T= card has been redsigned to support functionality introduced with CTC 2.2. CTC 2.2 will not operate with all older versions of the card (see the Products Affected section of this document).

Problem Symptoms

All boards prior to 800-0647-05, including the Cerent p/n CE 87-31-00011, will not support version 2.2 CTC or later.

Workaround/Solution

Cisco Systems is initiating a product upgrade and will be contacting customers to arrange an upgrade of the E100T card. If you have not been contacted by a Cisco Field Representative you may contact our Technical Assistance Center to request the issuance of a Return Materials Authorization (RMA). If you are scheduled to receive an upgrade to release 2.2 of CTC, please make sure to report the existence of any of these boards in your network as old revision boards will not operate with CTC 2.2. It is important to understand that without the upgraded cards Ethernet traffic will not operate using CTC 2.2.

How To Identify Hardware Levels

To identify a 15454-E100T= card version:

Open CMS
From the Shelf View, Click on the Inventory Tab
Check the HW Part # and HW Rev fields to verify that you have the appropriate board revision.

For More Information

If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:

Receive Email Notification For New Field Notices

Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.