Cisco Catalyst 9115
- Wi-Fi 6 certifiable
- Three radios: 2.4GHz (4x4), 5GHz (4x4), and BLE
- Supports OFDMA and MU-MIMO
- Internal and external antenna
Wireless data traffic is growing at a phenomenal rate. As more data is generated and more devices connect to the network, wireless access points are critical in providing a great user experience.
Cisco Catalyst 9100 access points are built to take care of that demand. Supporting the Wi-Fi 6 standard, also known as 802.11ax, the Catalyst 9100 addresses current and future network needs.
You’re up against big network demands, which is why we’re bringing in industry experts and influencers to discuss cutting-edge wired and wireless solutions. Tune in on 4/29 for our virtual event: Wired for Wireless.
Wi-Fi 6 supports more data to more clients than any prior version of the 802.11 standard. With speeds up to four times faster than 802.11ac Wave 2, you'll have more simultaneous throughput for more devices. Catalyst 9100 access points make sure your network is ready for the data onslaught.
With Wi-Fi 6 you can connect more than 100 devices per access point with latency-sensitive apps like voice over IP (VoIP) and video conferencing. That is three times more compared to prior standards, thanks to reduced latency provided by Catalyst 9100 access points.
The Cisco Catalyst 9100 access points support NBase-T and IEEE 802.3bz Ethernet compatibility to seamlessly offload network traffic without bottlenecks. With multigigabit technology, you can use your Cat 5e or Cat 6 cable to achieve speeds up to 10 Gbps. This scalable solution provides higher throughputs and saves money by minimizing cabling investments.
Devices such as smartphones, tablets, and IoT will see up to four times less energy consumption with Wi-Fi 6 when compared to prior standards.
Our end-to-end expert guidance helps you transform your network to help minimize risks and disruption, so you can innovate faster.