Document ID: 108824
Updated: Dec 12, 2008
This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products (formerly Linksys Business Series).
Q. How do I reset the Linksys VOIP router to factory default?A.
The router can be set to factory default by pressing the Reset button of the router and resetting through the router's web-based setup page.
Resetting the Router Using the Reset Button
Pressing the Reset button at the back of the router for 30 seconds will reset your router to its factory default settings. Any settings on the router will be erased and the router's IP address will become "192.168.15.1" and the username and password will be "admin" after resetting.
Note: Take note of the current settings of the device before resetting.
To reset the router via its web-based setup page, follow the steps below.
Resetting the Router Using the Web-Based Setup Page
Access the router's web-based setup page. For instructions, click here.
When the router's web-based setup page appears, click Administration then Factory Defaults.
Select Yes on the Restore Router Factory Defaults option.
The Cisco Support Community is a forum for you to ask and answer questions, share suggestions, and collaborate with your peers.
Refer to Cisco Technical Tips Conventions for information on conventions used in this document.