Cisco Small Business Voice Gateways and ATAs (Linksys Business Series)

The Voice screen displays information about your Internet phone line(s). To check the Phone registration status using the web-based setup page of the WRTP54G, follow the directions below. 

Checking the Phone Registration Status Using the Linksys VOIP Router 

Step 1:
Access the router's web-based setup page. For instructions, click here. 

Step 2:
When the router's web-based setup page appears, click Status then Voice. 

Step 3:
Check the following: 

Information

• Provisioning Status shows the provision status for the device. A message such as "Provision succeeded, Provision failed" may appear. 

Line1 Status

• Registration Status displays the phone number and status of this Internet phone line, so you know whether or not the phone line is registered with Vonage. If it is not registered and if the status indicates that the registration has failed, then you should register it with Vonage.
• Call1 Status shows the status of the active phone call.
• Call2 Status shows if you are using call waiting as well as the status of the incoming phone call. 

Line2 Status

• Registration Status displays the phone number and status of this Internet phone line, so you know whether or not the phone line is registered with Vonage. If it is not registered and if the status indicates that the registration has failed, then you should register it with Vonage.
• Call1 Status shows the status of the active phone call.
• Call2 Status shows if you are using call waiting as well as the status of the incoming phone call.