The Cisco Unity® IP Media Gateway products are integration devices designed to offer a high-quality connection between Cisco Unity or Cisco Unity Connection servers and your existing traditional private branch exchange (PBX). The Cisco Unity PBX IP Media Gateway (PIMG) is an 8-port, stackable integration device that emulates a digital or analog phone (station) on the PBX side and connects to the Cisco Unity server over a LAN or WAN using the Session Initiation Protocol (SIP). The Cisco Unity T1 IP Media Gateway (TIMG) is a single-span, rack-optimized device that translates the digital voice channel of a T1 trunk into SIP for transmission over a LAN or WAN to the Cisco messaging system. (Refer to Figure 1.)
Figure 1. Cisco Unity PIMG and TIMG Architecture Overview
Key Features and Benefits
The Cisco Unity IP Media Gateway products provide a feature-rich integration between several traditional PBX switches and Cisco® messaging systems, offering a mechanism to get all the productivity benefits of a Cisco unified messaging or voicemail solution while protecting your existing PBX infrastructure investment. The PIMG or TIMG along with your Cisco Unity or Cisco Unity Connection applications can become a central element in the coexistence of your traditional and IP environments, or it can offer a smooth and controlled migration path to a full Cisco IP Telephony solution.
The digital Cisco Unity PIMG can emulate a digital phone set to provide end-to-end digital signaling and voice transmission, offering better feature interoperability than many analog dual tone multifrequency (DTMF) connections for voicemail systems.
The Cisco Unity TIMG translates the digital voice channel of a T1 trunk into SIP for transmission over an IP network, providing up to 24 channels from one single-span TIMG, or 48 channels from one dual-span TIMG.
No Analog Lines Required (Digital Integration)
In many cases, traditional PBX deployments have few or no analog lines available. Adding analog line cards and lines just to connect to a voicemail or unified messaging system can be expensive and difficult. Because the Cisco Unity PIMG can connect directly to a digital phone line, or the Cisco Unity TIMG directly to a T1 trunk, most PBXs can natively connect directly to the PIMG or TIMG with no hardware or software upgrades required.
No PCI Voice Cards Required
The Cisco Unity PIMG and TIMG connect to the Cisco Unity or Cisco Unity Connection server using an IP connection and SIP. Because this connection is an IP connection, no voice cards are required, and the connection does not use any peripheral-component-interconnect (PCI) slots in your messaging server.
Cisco Unity Failover and Cisco Unity Conneciton High-Availability Support
You can configure the Cisco Unity PIMG to support Cisco Unity failover and Cisco Unity Connection high-availaiblity deployments.
For Cisco Unity messaging, during setup a primary server and a secondary server are defined. If a failover or failback occurs, the PIMG maintains visibility of the active server and can correctly route calls to and from the active messaging server.
For Cisco Unity Connection with high availaiblity, you can configure the PIMG for load balancing and fault tolerance.
Deployment Across a WAN
Because the Cisco Unity PIMG uses SIP to communicate with the Cisco Unity and Cisco Unity Connection servers, it is not necessary for these servers and the traditional PBX to be co-located. When the traditional PBX and PIMG or TIMG boxes are geographically separated from the voicemail server across a WAN, care should be taken to ensure that the network meets the throughput and quality-of-service (QoS) requirements to effectively carry voice traffic.
If the Cisco Unity or Cisco Unity Connection system connects to the PIMG or TIMG units over a WAN, the requirements for the WAN network connections follow:
• For G.729a codec formatting, a minimum of 32.76 kbps of guaranteed bandwidth for each voice messaging port
• For G.711 codec formatting, a minimum of 91.56 kbps of guaranteed bandwidth for each voice messaging port
• No network devices between the PIMG and Cisco Unity server that implement Network Address Translation (NAT) without SIP support
• A maximum 200-ms network latency
PIMG Branch-Office Consolidation
The IP connectivity of the Cisco Unity PIMGs and TIMGs enables simultaneous connection of an unlimited number of (limited only by the numer of ports on the system) PBXs to a single Cisco Unity or Cisco Unity Connection server. As long as the total number of ports is no greater then 144 for Cisco Unity Connection, or 200 for the Cisco Unity system, any combination of PBXs and stacked PIMGs or TIMGs is supported, allowing a single point of administration for organizations with multiple sites or PBXs. (Refer to Figure 2.)
Supported traditional PBX integrations are listed in the system requirements and supported hardware and software documents.
• For Cisco Unity unified messaging:
Supported Hardware and Software, and Support Policies for Cisco Unity Release 7.0.
• For Cisco Unity Connection:
Supported Hardware and Software, and Support Policies for Cisco Unity Connection 7.0.
Additional traditional PBX integrations will be supported and documented as they are tested and qualified. To request a qualification for a PBX integration that is not currently listed, please send an email message to OOB_Requests@cisco.com.
For Cisco Unity unified messaging, multiple PIMGs and TIMGs can be connected to a single Cisco Unity messaging server to provide up to 200 simultaneous voice sessions.
For Cisco Unity Connection, PIMGs can be stacked and connected to a single traditional PBX to provide up to 144 simultaneous voice sessions to the Cisco messaging server.
Please note that the Cisco Unity PIMG has regulatory certification for sale in the United States, Canada, and Western Europe (CE countries) only.
Cisco Unity IP Media Gateway Specifications
Tables 1 and 2 give specifications for Cisco Unity PIMGs and TIMGs, respectively.
You can deploy the Cisco Unity IP Media Gateways as part of either a Cisco Unity voicemail or unified messaging solution or a Cisco Unity Connection voicemail solution. Consult the online configuration tool and the appropriate ordering guidelines for more details about ordering Cisco Unity products.
The Cisco Unity PIMG comes with a power supply and a U.S. power cord. For use within other countries or regions, select the appropriate power cord option. No other cables or connectors (Ethernet cable, serial connectors, or digital phone lines) are included. Table 3 shows ordering information.
Table 3. Ordering Information
8-port PBX IP Media Gateway for digital integration between Cisco Unity, or Cisco Unity Connection, and traditional PBXs
8-port PBX IP Media Gateway for analog integration between Cisco Unity, or Cisco Unity Connection, and traditional PBXs
8-port PBX IP Media Gateway for integration between Cisco Unity and Mitel PBXs
8-port PBX IP Media Gateway for integration between Cisco Unity, or Cisco Unity Connection, and the Rolm 9751
Spare 8-port PBX IP Media Gateway for digital integration between Cisco Unity, or Cisco Unity Connection, and traditional PBXs
Spare 8-port PBX IP Media Gateway for analog integration between Cisco Unity, or Cisco Unity Connection, and traditional PBXs
Spare 8-port PBX IP Media Gateway for integration between Cisco Unity and Mitel PBXs
Spare 8-port PBX IP Media Gateway for integration between Cisco Unity, or Cisco Unity Connection, and the Rolm 9751
24-port T1 IP Media Gateway for T1 integrations between Cisco Unity and traditional PBXs
Spare 24-port T1 IP Media Gateway for T1 integrations between Cisco Unity and traditional PBXs
Cisco recommends that you use only the firmware versions for the Cisco Unity PIMG and TIMG that we have tested and qualified. Firmware updates for the Cisco Unity PIMG and TIMG are available on the Cisco Unity Utilities page at: http://www.cisco.com/pcgi-bin/tablebuild.pl/unity-PIMG.