Table Of Contents

CLR Commands

6.1  CLR-COND-SECU

6.2  CLR-MACTABLE

CLR Commands

---

This chapter provides CLR (clear) commands for the Cisco ONS 15310-MA SDH, Cisco ONS 15454 SDH, and Cisco ONS 15600 SDH.

6.1  CLR-COND-SECU

(Cisco ONS 15310-MA SDH, Cisco ONS 15454 SDH, and Cisco ONS 15600 SDH) The Clear Security Condition (CLR-COND-SECU) command clears the specified standing condition.

Usage Guidelines

In Software Release 6.0 and later, only the INTRUSION-PSWD parameter value is supported.

Category

Security

Security

Superuser

Input Format

CLR-COND-SECU:[<TID>]::<CTAG>[::<SECUALMTYPE>];

Input Example

CLR-COND-SECU:CISCO::123::INTRUSION-PSWD:

Table 6-1 CLR-COND-SECU Command - Parameter Support

Input Parameters	Description	ONS 15454 SDH	ONS 15600 SDH	ONS 15310-MA SDH
<SECUALMTYPE>	(Optional) Secure alarm type. Defaults to INTRUSION-PSWD. The parameter type is SECUALMTYPE, which is the security alarm type.	Y	Y	Y
•INTRUSION-PSWD	Condition raised after an invalid password is used during login. Condition is raised only if the password is used a specified number of times.	Y	Y	Y

6.2  CLR-MACTABLE

(Cisco ONS 15310-MA SDH, Cisco ONS 15454 SDH, and Cisco ONS 15600 SDH) The CLR-MACTABLE command clears the MAC table that has all the learned MAC addresses.

Usage Guidelines

The card should be in Layer2 over DMDM mode to clear the MAC address.

Category

System

Security

Retrieve

Input Format

CLR-MACTABLE :[<TID>]:<AID>:<CTAG>;

Input Example

CLR-MACTABLE::SLOT-2:1;