Table Of Contents

RMV Commands

19.1  RMV-<MOD2>

19.2  RMV-EQPT

RMV Commands

---

This chapter provides RMV (remove) commands for the Cisco ONS 15454 SDH.

19.1  RMV-<MOD2>

Remove (10GFC, 10GIGE, 1GFC, 1GFICON, 2GFC, 2GFICON, CLNT, D1VIDEO, DS3I, DV6000, E1, E3, E4, ESCON, ETRCLO, FSTE, G1000, GFPOS, GIGE, HDTV, ISC1, STM4, STM64, STM1, STM16, OCH, OMS, OTS, POS, STM1E, VC3, VC44C, VC38C, VC464C, VC48C, STS36C, VC4, VC416C, VC42C, VC43C, VC12)

Usage Guidelines

This command removes a facility from service.

See Table 27-1 on page 27-1 for supported modifiers by platform.

Category

Ports

Security

Maintenance

Input Format

RMV-<MOD2>:[<TID>]:<AID>:<CTAG>[::];

Input Example

RMV-E1:CISCO:FAC-1-1:1;

Input Parameters

Table 19-1 RMV-<MOD2> Input Parameters 

Parameter and Values	Description
AID	Access identifier from the "25.1  ALL" section on page 25-1

19.2  RMV-EQPT

Remove Equipment

Usage Guidelines

This command removes equipment from the In Service state and places it into the Maintenance state.

---

Note Only applicable to equipment that is in transition from the In-Service state to the Maintenance state.

---

Category

Equipment

Security

Maintenance

Input Format

RMV-EQPT:[<TID>]:<AID>:<CTAG>[::];

Input Example

RMV-EQPT:CISCO:SLOT-1:1;

Input Parameters

Table 19-2 RMV-EQPT Input Parameters 

Parameter and Values	Description
AID	Access identifier from the "25.1.11  EQPT" section on page 25-16