Cisco ONS 15454 SDH Procedure Guide, Release 4.0 - Appendix, B, Shelf Assembly Specifications [Cisco ONS 15400 Series]

Table Of Contents

Shelf Assembly Specifications

Bandwidth

Slot Assignments for Cards

Slot Assignments for FMECs

Cards

FMECs

Configurations

Cisco Transport Controller

External LAN Interface

Alarm Interface

Database Storage

Timing Interface

System Timing

Power Specifications

Environmental Specifications

Dimensions

Compliance

Shelf Assembly Specifications

This appendix contains hardware and software specifications for the ONS 15454 SDH.

Bandwidth

•Total bandwidth: 240 GBits/s (Gbps)

•Data plane bandwidth: 160 GBits/s (Gbps)

•SDH plane bandwidth: 80 GBits/s (Gbps)

Slot Assignments for Cards

The following slot assignments are applicable to the ONS 15454 SDH:

•Total card slots: 17 (Slots 1 to 17 in the lower part of the shelf for common cards, Ethernet cards, and optical (traffic) cards

•Multispeed slots (any card speeds up to STM-16): Slots 1 to 4, 14 to 17

•High-speed slots (any card speeds up to STM-64): Slots 5, 6, 12, 13

•Slots 6 and 12 are not to be used for electrical (traffic) cards because they have no corresponding FMEC slots

•TCC2 (Timing Communication and Control): Slots 7 and 11

•Cross Connect cards (XC10G, XC-VXL-10G, and XC-VXL-2.5G): Slots 8 and 10

•AIC-I (Alarm Interface Card): Slot 9

Slot Assignments for FMECs

The following slot assignments are applicable for FMECs in the ONS 15454 SDH:

•Total FMEC slots: 12 slots (Slots 18 to 29) in the upper part of the shelf for FMECs

•FMEC Slot 18 supports an electrical (traffic) card in Slot 1.

•FMEC Slot 19 supports an electrical (traffic) card in Slot 2.

•FMEC Slot 20 supports an electrical (traffic) card in Slot 3.

•FMEC Slot 21 supports an electrical (traffic) card in Slot 4.

•FMEC Slot 22 supports an electrical (traffic) card in Slot 5.

•FMEC Slot 23 is used for the alarm and power card called the MIC-A/P.

•FMEC Slot 24 is used for the timing, craft, and power card called the MIC-C/T/P.

•FMEC Slot 25 supports an electrical (traffic) card in Slot 13.

•FMEC Slot 26 supports an electrical (traffic) card in Slot 14.

•FMEC Slot 27 supports an electrical (traffic) card in Slot 15.

•FMEC Slot 28 supports an electrical (traffic) card in Slot 16.

•FMEC Slot 29 supports an electrical (traffic) card in Slot 17.

Cards

The following cards are available with the ONS 15454 SDH:

•TCC2

•XC10G

•XC-VXL-10G

•XC-VXL-2.5G

•AIC-I

•E1-N-14

•DS3iN-12

•E3-12

•E1-42

•OC3 IR 4/STM1 SH 1310

•STM1E-12

•OC3IR/STM1SH 1310-8

•OC12 IR/STM4 SH 1310

•OC12 LR/STM4 LH 1310

•OC12 LR/STM4 LH 1550

•OC12 IR/STM4 SH 1310-4

•OC48 IR/STM16 SH AS 1310

•OC48 LR/STM16 LH AS 1550

•OC48 ELR/STM16 EH 100 GHz

•OC192 SR/STM64 IO 1310

•OC192 IR/STM64 SH 1550

•OC192 LR/STM64 LH 1550

•OC192 LR/STM64 LH ITU 15xx.xx

•TXP_MR_10G (10Gbps Transponder)

•MXP_2.5G_10G (2.5Gbps/10Gbps Muxponder)

•E100T-G

•E1000-2-G

•G1000-4

•G1K-4

•ML100-12

•ML1000-2

•BLANK

Note The OC-3/STM-1, OC-12/STM-4, OC-48/STM-16, OC-192/STM-64 cards except OC192 LR/STM64 LH 1550, and the optical Ethernet (traffic) cards E1000-2-G, G1000-4, G1K-4, and ML1000-2 are Class 1 laser products (IEC 60825-1 2001-01/Class I laser product (21CFR 1040.10 and 1040.11).

Note The OC192 LR/STM64 LH 1550 card is a Class 1M laser product ((IEC 60825-1 2001-01)/Class I laser product (21CFR 1040.10 and 1040.11).

FMECs

The following FMEC cards are available with the ONS 15454 SDH:

•FMEC-E1

•FMEC-DS1/E1

•FMEC E1-120NP

•FMEC E1-120PROA

•FMEC E1-120PROB

•FMEC-E3/DS3

•FMEC STM1E NP

•FMEC STM1E 1:1

•FMEC STM1E 1:3

•MIC-A/P

•MIC-C/T/P

•FMEC-BLANK

Configurations

The ONS 15454 SDH can be configured as follows:

•Digital cross-connect

•Terminal mode

•Linear add-drop multiplexer

•Two-fibermultiplex section-shared protection ring (MS-SPRing)

•Four-fiber MS-SPRing

•Multi-ring interconnection

•Subnetwork connection protection (SNCP)

•Extended SNCP

•Virtual rings

•Hybrid SDH network topology

•Regenerator mode

•Wavelength multiplexer

Cisco Transport Controller

Cisco Transport Controller (CTC), the ONS 15454 SDH craft interface software, has the following specifications:

•10 Base-T

•TCC2 access: RJ-45 connector

•FMEC access: LAN connector on MIC-C/T/P faceplate

External LAN Interface

The ONS 15454 SDH external LAN interface has the following specifications:

•10 Base-T Ethernet

•FMEC access: LAN connector on MIC-C/T/P faceplate

Alarm Interface

The ONS 15454 SDH alarm interface has the following specifications:

•Visual: Critical, Major, Minor, Remote

•Audible: Critical, Major, Minor, Remote

•Alarm inputs: Common 32-VDC output for all alarm-inputs, closed contact limited to 2 mA

•Control outputs: Open contact maximum 60 VDC, closed contact maximum 100 mA

•FMEC access: 62-Pin DB connector on MIC-A/P faceplate

Database Storage

The ONS 15454 SDH has the following database storage specifications:

•Nonvolatile Memory: 128 MB, 3.0V flash memory

Timing Interface

The ONS 15454 SDH timing interface has the following specifications:

•2 coaxial inputs

•2 coaxial outputs

•FMEC access: 1.0/2.3 miniature coax connectors on MIC-C/T/P faceplate

System Timing

The ONS 15454 SDH has the following system timing specifications:

•Stratum 3E, per ITU-T G.813

•Free running accuracy: +/- 4.6 ppm

•Holdover stability: 3.7 exp -7/day, including temperature (< 255 slips in first 24 hours)

•Reference: External BITS, line, internal

Power Specifications

The ONS 15454 SDH has the following power specifications:

•Input voltage: -48 VDC

•Power consumption: Configuration dependent, 53W for fan tray; 650W (maximum draw w/cards)

•Power requirements:

–Nominal: -48 VDC

–Tolerance limits: -40.5 to -57.0 VDC

•Power terminals: 3WK3 Combo-D power cable connector (MIC-A/P and MIC-C/T/P faceplates)

•Fusing: 100 Amp fuse panel; minimum 30 Amp fuse per shelf

Environmental Specifications

The ONS 15454 SDH has the following environmental specifications:

•Operating Temperature: 0 to +40 degrees Celsius (32 to 104 degrees Fahrenheit)

•Operating Humidity: 5 to 95%, non-condensing

Dimensions

The ONS 15454 SDH shelf assembly has the following dimensions:

•Height: 616.5 mm (24.27 in.)

•Width: 535 mm (17 in.) without mounting ears attached

•Depth: 280 mm (11.02 in.)

•Weight: 26 kg empty (57.3 lb)

Compliance

The ONS 15454 SDH complies with the following standards:

•Safety: IEC 60950, EN 60950, UL 60950, CSA C22.2 No. 60950, TS 001, AS/NZS 3260, IEC 60825-1, IEC 60825-2, 21 CFR 1040-10, and 21 CFR 1040.11

•Class 1M (IEC 60825-1 2001.01) and Class 1 (21 CFR 1040.10 and 1040.11) laser product

	Cisco ONS 15454 SDH Procedure Guide, Release 4.0
	Appendix, B, Shelf Assembly Specifications
Cisco ONS 15454 SDH Procedure Guide, Release 4.0 Chapter 1, Install Shelf and Backplane Hardware Chapter 2, Install Cards and Fiber-Optic Cable Chapter 3, Connect the PC and Log into the GUI Chapter 4, Turn Up Node Chapter 5, Turn Up Network Chapter 6, Create Circuits and VT Tunnels Chapter 7, Manage Alarms Chapter 8, Monitor Performance Chapter 9, Manage Circuits Chapter 10, Change Node Settings Chapter 11, Change Card Settings Chapter 12, Upgrade Cards and Spans Chapter 13, Upgrade Network Configurations Chapter 14, Add and Remove Nodes Chapter 15, Maintain the Node Chapter 16, Power Down the ONS 15454 Appendix A, CTC Information and Shortcuts Appendix, B, Shelf Assembly Specifications Appendix C, Network Element Defaults	Download this chapter Appendix, B, Shelf Assembly Specifications Download the complete book Cisco ONS 15454 SDH Procedure Guide, Release 4.0 (PDF - 9 MB) Table Of Contents Shelf Assembly Specifications Bandwidth Slot Assignments for Cards Slot Assignments for FMECs Cards FMECs Configurations Cisco Transport Controller External LAN Interface Alarm Interface Database Storage Timing Interface System Timing Power Specifications Environmental Specifications Dimensions Compliance Shelf Assembly Specifications This appendix contains hardware and software specifications for the ONS 15454 SDH. Bandwidth •Total bandwidth: 240 GBits/s (Gbps) •Data plane bandwidth: 160 GBits/s (Gbps) •SDH plane bandwidth: 80 GBits/s (Gbps) Slot Assignments for Cards The following slot assignments are applicable to the ONS 15454 SDH: •Total card slots: 17 (Slots 1 to 17 in the lower part of the shelf for common cards, Ethernet cards, and optical (traffic) cards •Multispeed slots (any card speeds up to STM-16): Slots 1 to 4, 14 to 17 •High-speed slots (any card speeds up to STM-64): Slots 5, 6, 12, 13 •Slots 6 and 12 are not to be used for electrical (traffic) cards because they have no corresponding FMEC slots •TCC2 (Timing Communication and Control): Slots 7 and 11 •Cross Connect cards (XC10G, XC-VXL-10G, and XC-VXL-2.5G): Slots 8 and 10 •AIC-I (Alarm Interface Card): Slot 9 Slot Assignments for FMECs The following slot assignments are applicable for FMECs in the ONS 15454 SDH: •Total FMEC slots: 12 slots (Slots 18 to 29) in the upper part of the shelf for FMECs •FMEC Slot 18 supports an electrical (traffic) card in Slot 1. •FMEC Slot 19 supports an electrical (traffic) card in Slot 2. •FMEC Slot 20 supports an electrical (traffic) card in Slot 3. •FMEC Slot 21 supports an electrical (traffic) card in Slot 4. •FMEC Slot 22 supports an electrical (traffic) card in Slot 5. •FMEC Slot 23 is used for the alarm and power card called the MIC-A/P. •FMEC Slot 24 is used for the timing, craft, and power card called the MIC-C/T/P. •FMEC Slot 25 supports an electrical (traffic) card in Slot 13. •FMEC Slot 26 supports an electrical (traffic) card in Slot 14. •FMEC Slot 27 supports an electrical (traffic) card in Slot 15. •FMEC Slot 28 supports an electrical (traffic) card in Slot 16. •FMEC Slot 29 supports an electrical (traffic) card in Slot 17. Cards The following cards are available with the ONS 15454 SDH: •TCC2 •XC10G •XC-VXL-10G •XC-VXL-2.5G •AIC-I •E1-N-14 •DS3iN-12 •E3-12 •E1-42 •OC3 IR 4/STM1 SH 1310 •STM1E-12 •OC3IR/STM1SH 1310-8 •OC12 IR/STM4 SH 1310 •OC12 LR/STM4 LH 1310 •OC12 LR/STM4 LH 1550 •OC12 IR/STM4 SH 1310-4 •OC48 IR/STM16 SH AS 1310 •OC48 LR/STM16 LH AS 1550 •OC48 ELR/STM16 EH 100 GHz •OC192 SR/STM64 IO 1310 •OC192 IR/STM64 SH 1550 •OC192 LR/STM64 LH 1550 •OC192 LR/STM64 LH ITU 15xx.xx •TXP_MR_10G (10Gbps Transponder) •MXP_2.5G_10G (2.5Gbps/10Gbps Muxponder) •E100T-G •E1000-2-G •G1000-4 •G1K-4 •ML100-12 •ML1000-2 •BLANK Note The OC-3/STM-1, OC-12/STM-4, OC-48/STM-16, OC-192/STM-64 cards except OC192 LR/STM64 LH 1550, and the optical Ethernet (traffic) cards E1000-2-G, G1000-4, G1K-4, and ML1000-2 are Class 1 laser products (IEC 60825-1 2001-01/Class I laser product (21CFR 1040.10 and 1040.11). Note The OC192 LR/STM64 LH 1550 card is a Class 1M laser product ((IEC 60825-1 2001-01)/Class I laser product (21CFR 1040.10 and 1040.11). FMECs The following FMEC cards are available with the ONS 15454 SDH: •FMEC-E1 •FMEC-DS1/E1 •FMEC E1-120NP •FMEC E1-120PROA •FMEC E1-120PROB •FMEC-E3/DS3 •FMEC STM1E NP •FMEC STM1E 1:1 •FMEC STM1E 1:3 •MIC-A/P •MIC-C/T/P •FMEC-BLANK Configurations The ONS 15454 SDH can be configured as follows: •Digital cross-connect •Terminal mode •Linear add-drop multiplexer •Two-fibermultiplex section-shared protection ring (MS-SPRing) •Four-fiber MS-SPRing •Multi-ring interconnection •Subnetwork connection protection (SNCP) •Extended SNCP •Virtual rings •Hybrid SDH network topology •Regenerator mode •Wavelength multiplexer Cisco Transport Controller Cisco Transport Controller (CTC), the ONS 15454 SDH craft interface software, has the following specifications: •10 Base-T •TCC2 access: RJ-45 connector •FMEC access: LAN connector on MIC-C/T/P faceplate External LAN Interface The ONS 15454 SDH external LAN interface has the following specifications: •10 Base-T Ethernet •FMEC access: LAN connector on MIC-C/T/P faceplate Alarm Interface The ONS 15454 SDH alarm interface has the following specifications: •Visual: Critical, Major, Minor, Remote •Audible: Critical, Major, Minor, Remote •Alarm inputs: Common 32-VDC output for all alarm-inputs, closed contact limited to 2 mA •Control outputs: Open contact maximum 60 VDC, closed contact maximum 100 mA •FMEC access: 62-Pin DB connector on MIC-A/P faceplate Database Storage The ONS 15454 SDH has the following database storage specifications: •Nonvolatile Memory: 128 MB, 3.0V flash memory Timing Interface The ONS 15454 SDH timing interface has the following specifications: •2 coaxial inputs •2 coaxial outputs •FMEC access: 1.0/2.3 miniature coax connectors on MIC-C/T/P faceplate System Timing The ONS 15454 SDH has the following system timing specifications: •Stratum 3E, per ITU-T G.813 •Free running accuracy: +/- 4.6 ppm •Holdover stability: 3.7 exp -7/day, including temperature (< 255 slips in first 24 hours) •Reference: External BITS, line, internal Power Specifications The ONS 15454 SDH has the following power specifications: •Input voltage: -48 VDC •Power consumption: Configuration dependent, 53W for fan tray; 650W (maximum draw w/cards) •Power requirements: –Nominal: -48 VDC –Tolerance limits: -40.5 to -57.0 VDC •Power terminals: 3WK3 Combo-D power cable connector (MIC-A/P and MIC-C/T/P faceplates) •Fusing: 100 Amp fuse panel; minimum 30 Amp fuse per shelf Environmental Specifications The ONS 15454 SDH has the following environmental specifications: •Operating Temperature: 0 to +40 degrees Celsius (32 to 104 degrees Fahrenheit) •Operating Humidity: 5 to 95%, non-condensing Dimensions The ONS 15454 SDH shelf assembly has the following dimensions: •Height: 616.5 mm (24.27 in.) •Width: 535 mm (17 in.) without mounting ears attached •Depth: 280 mm (11.02 in.) •Weight: 26 kg empty (57.3 lb) Compliance The ONS 15454 SDH complies with the following standards: •Safety: IEC 60950, EN 60950, UL 60950, CSA C22.2 No. 60950, TS 001, AS/NZS 3260, IEC 60825-1, IEC 60825-2, 21 CFR 1040-10, and 21 CFR 1040.11 •Class 1M (IEC 60825-1 2001.01) and Class 1 (21 CFR 1040.10 and 1040.11) laser product
	© 1992-2009 Cisco Systems, Inc. All rights reserved. Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks of Cisco Systems, Inc.