Guest

Products & Services

Cisco ASR 1000 Series Aggregation Services Routers Data Sheet

Let Us Help

  • Viewing Options

  • PDF (943.0 KB)
  • Feedback

Cisco is reinventing edge routing with the Cisco® ASR 1000 Series Aggregation Services Routers, a portfolio of midrange routers that establish a new price-to-performance class offering, benefiting both service providers and enterprises alike:

For service providers, the Cisco ASR 1000 Series Routers facilitate more flexible, efficient, and cost‑effective delivery of complex consumer and business services.

For enterprises, the Cisco ASR 1000 Series Routers deliver a highly reliable, high-performance WAN edge solution where information, communication, collaboration, and commerce converge.

The Cisco ASR 1000 Series Routers:

Accelerate services by offering outstanding performance and resiliency with optimized, intelligent services

Establish a new benchmark for price-to-performance offerings in the enterprise advanced routing, service provider edge, and broadband aggregation segments

Facilitate significant network architectural innovations in areas such as secure WAN aggregation, managed customer-premises-equipment (CPE) services, and service provider edge services

Reduce operating expenses (OpEx) and capital expenditures (CapEx) by facilitating managed or hosted services over identical architectures and operating environments

Product Overview

The Cisco ASR 1000 Series consists of these different versions (Figure 1): the Cisco ASR 1001 Router, the Cisco ASR 1002 Fixed Router, the Cisco ASR 1002 Router, the Cisco ASR 1002-X Router, the Cisco ASR 1004 Router, the Cisco ASR 1006 Router, and the Cisco ASR 1013 Router. All models use the innovative and powerful Cisco QuantumFlow Processor, which provides a huge leap in performance and resiliency for network processors.

Figure 1. Cisco ASR 1000 Series Aggregation Services Routers

The Cisco ASR 1000 Series provides a significant enhanced value compared to prior generations of Cisco midrange routing solutions by providing more than tenfold performance improvement with services running. Additionally, the routers have hardware and software redundancy, as well as an industry-leading high-availability design.

The Cisco ASR 1000 Series delivers multiple services embedded in the Cisco QuantumFlow Processor at wire speeds from 2.5 to 200 Gbps. The services supported on the Cisco QuantumFlow Processor include security services (for example, encryption and firewall), quality of service (QoS), Network-Based Application Recognition (NBAR), Cisco IOS® Flexible Packet Matching (FPM), broadband aggregation, and Cisco Unified Border Element (SP Edition) (formerly called Session Border Controller, or SBC), among others.

With the separation of the control and data planes in the Cisco ASR 1000 Series Router architecture, software redundancy (on the Cisco ASR 1001, ASR 1002 Fixed, ASR 1002, ASR 1002-X, and ASR 1004 Routers) and hardware redundancy (on the Cisco ASR 1006 and ASR 1013 Routers) are provided. Additionally, the modular Cisco IOS XE Software that is introduced with the Cisco ASR 1000 Series facilitates In-Service Software Upgrade (ISSU).

The Cisco ASR 1001 Router also introduces the concept of integrated daughter cards (IDCs). There is one Cisco ASR 1001 base model without an integrated daughter card and five models with integrated daughter cards offering different additional I/O connectivity or an integrated hard disk drive (HDD); their part numbers follow:

As of Cisco IOS XE Software Release 3.2S:

ASR1001: Base version without an IDC

ASR1001-2XOC3POS: Delivered with an IDC that provides 2 OC-3 Packet-over-SONET/SDH (PoS) ports

ASR1001-4XT3: Delivered with an IDC that provides 4 T3 ports (no E3 circuitry)

As of Cisco IOS XE Software Release 3.3S:

ASR1001-4X1GE: Delivered with an IDC that provides 4 Gigabit Ethernet (GE) ports

ASR1001-8CHT1E1: Delivered with an IDC that provides 8 Channelized T1/E1 ports

ASR1001-HDD: Delivered with an integrated HDD

Note: The IDCs are not field-upgradable.

Cisco Software Activation is supported for performance upgrade from 2.5 to 5 Gbps (on the Cisco ASR 1001 Router) and from 5 to 10, 20, or 36 Gbps (on the Cisco ASR 1002-X Router). From a price-to-performance perspective, the Cisco ASR 1000 Series Router solution fits well between the Cisco 7200 Series, Cisco 7300 Series, and Cisco 7600 Series; Cisco ASR 9000 Series; and Cisco Catalyst® 6000 Series Routers, thus dramatically enhancing the Cisco midrange routing portfolio (Figure 2).

Figure 2. Cisco Midrange Routing Portfolio

More details about the individual Cisco ASR 1000 Series components, such as the Cisco ASR 1000 Series Embedded Services Processors (ESPs), the Cisco ASR 1000 Series Route Processors, and the Cisco ASR 1000 Series SPA Interface Processor (SIP) cards, are available in the respective data sheets:

Cisco ASR 1000 Series ESPs: http://www.cisco.com/go/asr1000

Cisco ASR 1000 Series Route Processor: http://www.cisco.com/go/asr1000

Cisco ASR 1000 Series SIP: http://www.cisco.com/go/asr1000

Applications

Tables 1 and 2 describe enterprise and service provider application examples, respectively.

Table 1. Cisco ASR 1000 Series Enterprise Applications

Applications

Benefits

Implementations

Superior application availability at the WANedge:

Guarantee high-priority applications by creating a virtual “glass ceiling” for lower-priority applications.

Applies Modular QoS CLI (MQC) policies on VLANs or tunnels
Clamps an arbitrary collection of low‑priority traffic to a certain bandwidth
Classifies based on differentiated services code point (DSCP), NBAR, and Cisco IOS FPM into numerous hierarchies, one for high priority and one for low priority
Implements flexible hierarchies
Supports 232,000 queues
Allows all queues to have a minimum, maximum, and excess bandwidth with priority propagation

Multiservice, scalable, and secure headend:

The Cisco ASR 1000 Series offers full-service IP Security (IPsec*) VPN aggregation that scales to meet the new bandwidth demands of service provider IP VPNs.

Reduces capital expenditures (CapEx) and operating expenses (OpEx) by migrating and consolidating to fewer Cisco ASR 1000 Series Routers
Protects investment through easy transition to much higher encryption support, offering encryption support of up to 78 Gbps with the 200-Gbps Cisco ASR 1000 Series ESP (ASR1000-ESP200)
Offers easier management through embedded security services in the Cisco QuantumFlow Processor, with no additional service modules or blades required
Optimized for QoS and IP Multicast applications
Supports thousands of sites
Supports 8,000 IPsec tunnels
Offers up to 78-Gbps encryption performance and up to 200-Gbps noncryptographic throughput support with the Cisco ASR 1000 Series 200-Gbps Embedded Services Processor (ASR1000-ESP200) engine

Embedded high-speed firewall:

With the Zone-Based Policy Firewall, the Cisco ASR 1000 Series acts as an implicit complete barrier between any interfaces not members of the same zone. An explicit zone-pair policy must be specified (using Cisco Policy Language; that is, MQC) in each direction between each zone pair. The policy establishes within the router the kind of stateful inspection (Layer 4, Layer 7, or application) and session parameters to apply to each zone pairing.

Example: An explicit policy allowing HTTP and Domain Name System (DNS) to traverse the Internet-DMZ zone boundary would be required.

The firewall is embedded in the Cisco QuantumFlow Processor; no additional service blades or modules are required
Multigigabits of bandwidth are routed while at the same time the router performs Zone‑Based Policy Firewall and other baseline features such as QoS, IPv4, IPv6, NetFlow, etc.
The Cisco ASR 1000 Series provides logging of all firewall session states off to network-management applications capable of accepting relatively huge amounts of flow data. Third-party applications can handle the session data.
Provides firewall performance of 2.5 to 200 Gbps, depending on the embedded services processor
Offers high-speed logging of 40,000 sessions per second with NetFlow Version 9

Managed CPE:

This implementation of branch-office architecture offers powerful investment protection with services and scale.

Managed CPE helps branch offices route correctly over various types of Ethernet service-level agreements (SLAs).
This application encrypts multigigabits of bandwidth - without any additional service blades or modules.
Managed CPE optimizes the WAN to routearound brownouts in the service provider network to further guarantee mission-critical applications.
This application offers small form factors (1rack unit [1RU] for the Cisco ASR 1001 and 2RUs for the Cisco ASR 1002 Fixed, ASR 1002, and ASR 1002-X Routers), including software modularity and ISSU.

Note: ISSU is not supported on ASR1001, ASR1002-F, ASR1002, ASR1002-X, or ASR1004. Managed CPE offers accessibility even when the Cisco IOS Software is down.

Offers first-in-industry software redundancy support, without any additional hardware module, on ASR1001, ASR1002-F, ASR1002, ASR1002-X, and ASR1004; hardware redundancy and ISSU are supported on ASR1006 and ASR1013
Offers powerful firewall and Network Address Translation (NAT) performance of 2.5 to 200 Gbps and 1.8- to 78-Gbps encryption support in addition to WAN optimization and voice features
* This product includes software developed by Cavium Networks.

Table 2. Cisco ASR 1000 Series Service Provider Applications

Applications

Benefits

Implementations

Broadband L2TP Access Concentrator (LAC) or L2TP Network Server (LNS):

The solution offers Layer 2 Tunneling Protocol (L2TP) endpoint-to-tunnel Point‑to-Point Protocol (PPPoX) or IP sessions with bandwidth demands in the STM-1 ATM, Fast Ethernet, Gigabit Ethernet, and 10Gigabit Ethernet range.

The application is ideal for triple-play (data, voice, and video) wholesale deployments.
It offers integral service delivery.
Per-user firewall, SBC, etc. are supported.
Provides very high scalability of up to 64,000 subscribers and up to 64,000 tunnels

Service provider edge: Layer 3 VPN (L3VPN) provider edge:

Example: You can deploy the solution at the distributed provider edge, or provider edge in global VPN networks for bandwidth demands such as asymmetric DSL (ADSL), T1/E1, STM-1, STM-4, Fast Ethernet, Gigabit Ethernet, etc.

The application provides integral services in the Cisco QuantumFlow Processor.
It provides encryption, FPM, NBAR, SBC, IP Multicast, etc.
Offers excellent multicast performance
Scales to 8,000 Virtual Route Forwarding (VRF) instances, 1million Label Distribution Protocol (LDP) labels, and 4,000 access control lists (ACLs)
Supports up to 4 million IPv4 routes
Supports up to 4 million IPv6 routes

Service provider edge: High-end route reflector:

You can use the solution as a route reflector for bandwidth support of 40 Gbps.

The application provides high scalability.
It offers a modular design of the route processor and embedded services processor with hardware and software redundancy.
Scales up to 29 million IPv4 routes
Supports 64,000 Layer 3 adjacencies
Offers sufficient memory (8-GB DRAM) (onASR1001, ASR1002-X, and ASR1000‑RP2)
Offers optional upgrade to 16-GB DRAM (on ASR1001, ASR1002-X, and ASR1000‑RP2)

Note: The Cisco ASR 1001, ASR 1002 Fixed, ASR 1002, and ASR1002-X Routers ship by default with 4-GB DRAM. The Cisco ASR 1001 and ASR1002-X are upgradable to 8- or 16-GB DRAM.

Offers extensive Border Gateway Protocol (BGP) feature support

Next-generation voice and multimedia example: Cisco Unified Border Element (SPEdition):

The SBC application (named Cisco Unified Border Element [SP Edition]) performs the voice and video gateway functions simultaneously with regular IP data services. No appliance or additional service blade is required. The control protocols and media protocols work transparently within a complex voice architecture.

The WAN edge is simpler to manage because only one egress and one ingress point need management and policy application.
With the distributed control plane and separate data-forwarding plane, the signaling and control processing remain separate from media processing.
ISSU support allows for easy addition of new-use cases.
You can use a single SBC application on the Cisco ASR 1000 Series for residential, enterprise, and service provider peering applications.
Facilitates SBC with security, QoS, IPv4, and IPv6 (IP Unicast and IP Multicast simultaneously)
Supports 32,000 simultaneous voice calls and multimedia data of up to 40 Gbps with accounting, firewall, and call quality enabled
Integrated with inbox high-availability infrastructure and Dynamic Host Configuration Protocol (DHCP) Relay

Software

The Cisco ASR 1000 Series is supported in Cisco IOS XE Software, which was introduced with the Cisco ASR 1000 Series Routers as a modular operating system. Based on Cisco IOS Software (Cisco IOS Software Release 12.2SR for Cisco IOS XE Software Releases 2.1.0 through 2.6.0 and Cisco IOS Software Release 15S starting with Cisco IOS XE Software Release 3.1.0S), Cisco IOS XE Software is designed to provide modular packaging, feature velocity, and powerful resiliency. Because of the extreme flexibility and robust performance of the Cisco ASR 1000 Series, ESPs - which are based on the Cisco QuantumFlow Processor technology, network security, deep packet inspection, Cisco IOS Firewall, and many other advanced features - are implemented in Cisco IOS XE Software without the need for additional hardware support (for example, in the form of a service blade).

One of the most innovative features is that the Cisco IOS XE Software supports dual Cisco IOS Software consolidated packages in a single Cisco ASR 1000 Series Route Processor for software redundancy in the CiscoASR 1001, ASR 1002 Fixed, ASR 1002, ASR 1002-X, and ASR 1004 Routers. This dual Cisco IOS Software consolidatedpackage could be the same consolidated package for backup, or a different consolidated package alsoon a different Cisco IOS XE Software release for resilient upgrade. Information about the compatibility of supported dual consolidated packages is available in the release notes (Cisco IOS XE Software Release Notes 2: http://www.cisco.com/en/US/docs/ios/ios_xe/2/release/notes/rnasr21.html and Cisco IOS XE Software Release Notes 3: http://www.cisco.com/en/US/docs/ios/ios_xe/3/release/notes/asr1k_rn_3s_rel_notes.html). The (optional) hardware-redundant route processor and ESP configuration in the Cisco ASR 1006 and ASR 1013 Routers does not support Cisco IOS Software redundancy in a single route processor because each of the two route processors supports one Cisco IOS XE Software image.

For ease of ordering, you can choose from six supported consolidated packages in each Cisco IOS XE Software release:

IP Base without Crypto

IP Base

Advanced IP Services

Advanced IP Services without Crypto

Advanced Enterprise Services

Advanced Enterprise Services without Crypto

All Cisco IOS XE Software Route Processor 1 (RP1) consolidated packages are compatible across the entire Cisco ASR 1000 Series with the Cisco ASR 1000 Series Route Processor 1 (ASR1000-RP1). Similar compatibility exists for the Cisco ASR 1000 Series Route Processor 2 (ASR1000-RP2) across Cisco ASR 1004, ASR 1006, and ASR 1013 Routers and for Cisco ASR 1001 and ASR 1002-X Routers with the route processor integrated. Table 3 describes each of the Cisco IOS XE consolidated packages supported on the Cisco ASR 1000 Series Route Processor 1 (ASR1000-RP1) as an example. With the Cisco ASR 1001 Router supported as of Cisco IOS XE Software Release 3.2.0S, the concept of Cisco Software Activation is introduced for the Cisco ASR 1000 Series - initially on the Cisco ASR 1001 only, now on the Cisco ASR 1002-X as well. Table 4 describes the three Cisco IOS XE universal consolidated packages supported on the Cisco ASR 1001, and Table 5 describes them on the Cisco ASR 1002-X. Table 6 lists the Cisco ASR 1001 and ASR 1002-X universal consolidated package and technology package license combinations that correspond to the equivalent software feature sets on the other Cisco ASR 1000 Series chassis.

Table 3. Descriptions of Cisco IOS XE Software Consolidated Packages for Cisco ASR 1000 Series RP1 (ASR1000-RP1), ASR1002 (ASR1002), and ASR 1002 Fixed (ASR1002-F) Routers with Integrated Cisco ASR 1000 Series RP1 (ASR1000-RP1)

Cisco IOS XE Consolidated Package

Part Number

Description

Cisco ASR 1000 Series RP1 IP Base without Crypto

SASR1R1-IPB

Provides low-cost base consolidated package
Offers only basic IP feature support
Satisfies export requirements for noncryptographic software

Cisco ASR 1000 Series RP1 IP Base

SASR1R1-IPBK9

Provides low-cost base consolidated package
Offers only basic IP feature support, including Secure Shell (SSH) Protocol and Simple Network Management Protocol Version 3 (SNMPv3) support
Does not support IPsec *, Triple Digital Encryption Standard 3DES], or Advanced Encryption Standard [AES]

Cisco ASR 1000 Series RP1 Advanced IP Services

SASR1R1-AISK9

Targeted for service provider customers
Supports all features, including encryption (IPsec, 3DES, AES, and SSH), Lawful Intercept, and SBC
Does not support older protocols

Cisco ASR 1000 Series RP1 Advanced IP Services without Crypto

SASR1R1-AIS

Targeted for export-restricted customers
Supports all features, including Lawful Intercept and SBC
Does not support older protocols
Does not support encryption services

Cisco ASR 1000 Series RP1 Advanced Enterprise Services

SASR1R1-AESK9

Supports all features included in the Advanced IP Services image as well as older protocols

Cisco ASR 1000 Series RP1 Advanced Enterprise Services without Crypto

SASR1R1-AES

Does not support encryption services
Supports all other features included in the Advanced IP Services image as well as older protocols
* This product includes software developed by Cavium Networks.

Table 4. Descriptions of Universal Cisco IOS XE Software Consolidated Packages for Cisco ASR 1001 with an Integrated Route Processor

Cisco IOS XE Consolidated Package

Part Number

Description

Cisco ASR1001 IOS XE UNIVERSAL

SASR1001U

Provides low-cost base consolidated package
Offers only basic IP feature support
Satisfies export requirements for noncryptographic software

Cisco ASR1001 IOS XE - NO PAYLOAD ENCRYPTION UNIVERSAL

SASR1001NPEK9

Provides low-cost base consolidated package
Offers only basic IP feature support, including SSH and SNMPv3 support

Cisco ASR1001 IOS XE - ENCRYPTION UNIVERSAL

SASR1001UK9

Supports all features, including encryption (IPsec, 3DES, AES, and SSH), Lawful Intercept, and SBC as well as older protocols

Table 5. Descriptions of Universal Cisco IOS XE Software Consolidated Packages for Cisco ASR 1002-X with an Integrated Route Processor

Cisco IOS XE Consolidated Package

Part Number

Description

Cisco ASR1002-X IOS XE UNIVERSAL

SASR1K2XU

Provides low-cost base consolidated package
Offers only basic IP feature support
Satisfies export requirements for noncryptographic software

Cisco ASR1002-X IOS XE - NO PAYLOAD ENCRYPTION UNIVERSAL

SASR1K2XNPEK9

Provides low-cost base consolidated package
Offers only basic IP feature support, including SSH and SNMPv3 support

Cisco ASR1002-X IOS XE - ENCRYPTION UNIVERSAL

SASR1K2XUK9

Supports all features, including encryption (IPsec, 3DES, AES, and SSH), Lawful Intercept, and SBC as well as older protocols

Table 6. Part Numbers for Cisco ASR 1001 and ASR 1002-X Software Feature Set Enablement

For the Equivalent Feature Set on Cisco ASR 1000 Series (Cisco ASR 1002 Fixed/ASR1002/ASR1004/ASR1006/ASR1013)

To Order Universal Software Image Part Number

In Combination

With Technology Package License Part Number

IP Base without crypto (IPB)

SASR1001U/
SASR1K2XU

SLASR1-IPB

IP Base (IPBK9)

SASR1001NPEK9/
SASR1K2XNPEK9

SLASR1-IPB

Advanced IP Services without crypto (AIS)

SASR1001U/
SASR1K2XU

SLASR1-AIS

Advanced IP Services (AISK9)

SASR1001UK9/
SASR1K2XUK9

SLASR1-AIS

Advanced Enterprise Services without crypto (AES)

SASR1001U/
SASR1K2XU

SLASR1-AES

Advanced Enterprise Services (AESK9)

SASR1001UK9/
SASR1K2XUK9

SLASR1-AES

Each of the Cisco IOS XE Software consolidated packages consists of seven different subpackages. You can download each Cisco IOS XE consolidated package from Cisco.com. For upgrades for support of new features, you can upgrade the consolidated package as a whole or each of the seven subpackages as an individual subpackage. Compatibility of the different subpackages in each consolidated package is checked with a compatibility matrix.

Table 7 lists the seven software subpackages that make up each of the Cisco IOS XE Software consolidated packages.

Table 7. Cisco IOS XE Software Subpackages

Cisco IOS XE Subpackages

Function of Each Subpackage

RPBase

This subpackage provides the operating system software for the route processor.

RPControl

This subpackage controls the control-plane processes that interface between the Cisco IOS Software and the rest of the platform.

RPAccess (non-K9)

This subpackage is required for router access. It is included only in the Cisco IOS XE consolidated packages that do not have cryptographic or SSH support.

RPAccess (K9)

This subpackage is required for router access. It includes restricted components (Secure Sockets Layer [SSL] and SSH). The Cisco IOS XE Software consolidated packages with this subpackage are subject to export controls.

RPIOS

This subpackage provides the Cisco IOS Software kernel, which is where Cisco IOS Software features are storedand run. Each Cisco IOS XE Software consolidated package has a different Cisco IOS Software image (for example, the Cisco IOS XE Software consolidated package Cisco ASR 1000 Series RP1 IP Base without Crypto contains the Cisco IOS IP Base without Crypto image).

ESPBase

This subpackage provides the ESP operating system and control processes and the ESP software.

SIPSPA

This subpackage provides the shared-port-adaptor (SPA) driver and associated field-programmable device (FPD) images.

SIPBase

This subpackage controls the SIP carrier-card operating system and control processes.

Product Specifications

Table 8 compares the different Cisco ASR 1000 Series Routers, and Table 9 provides further Cisco ASR 1000 Series product specifications. Table 10 lists the SPAs supported; this list will be extended over time, so please check with your local Cisco account representative for information about the latest SPAs offered.

Table 8. Cisco ASR 1000 Series: Chassis Comparison and Specifications

Model

Cisco ASR 1001

Cisco ASR 1002 Fixed

Cisco ASR 1002

Cisco ASR 1002-X

Cisco ASR 1004

Cisco ASR 1006

Cisco ASR 1013

Physical specifications

Note: Depth applies to chassis edge-to-edge dimension and does not include protrusions such as card handles, power supply handles and cable management brackets.

Refer to applicable hardware installation guide for additional detail.

Height: 1.71 in. (43.43 mm)

Width: 17.3 in. (439.42 mm)

Depth: 18.42 in. (467.9mm)

Weight:

23.30 lb (10.59 kg) (with dual AC power and integrated daughter card)
22.70 lb (8.94 kg) (with dual DC power and integrated daughter card)
No SPA included

Note: The Cisco ASR 1001 Router has the route processor, ESP, and SIP integrated.

Height: 3.5 in. (88.9 mm)

Width: 17.2 in. (437.4 mm)

Depth: 18.15 in. (461.0 mm)

Weight:

33.65 lb (15.23 kg) (with dual AC power supply and SPA blank covers)
36.85 lb (16.75 kg) (with dual DC power supply, blank covers, and Cisco ASR 1000 Series 2.5-Gbps ESP)
No SPA included

Note: The Cisco ASR 1002 Fixed Router has the route processor, ESP, and SIP integrated.

Height: 3.5 in. (88.9 mm)

Width: 17.2 in. (437.4 mm)

Depth: 18.15 in. (461.0 mm)

Weight:

33.65 lb (15.23 kg) (with dual AC power supply and SPA blank covers)
36.85 lb (16.75 kg) (with dual DC power supply, blank covers, and Cisco ASR 1000 Series 5-Gbps ESP [ASR1000-ESP5])
No SPAs included

Note: The Cisco ASR 1002 has the route processor and SIP integrated.

Height: 3.5 in. (88.9 mm)

Width: 17.2 in. (437.4 mm)

Depth: 18.15 in. (461.0 mm)

Weight:

38.25 lb (17.36 kg) (with dual AC power supply and SPA blank covers)
39.05 lb (17.72 kg) (with dual DC power supply and blank covers)
No SPAs included

Note: The Cisco ASR 1002-X has the route processor, ESP, and SIP integrated.

Height: 7 in. (177.8mm)

Width: 17.2 in. (437.4 mm)

Depth: 18.15 in. (461.0 mm)

Weight:

68.7 lb (31.16 kg) (with dual AC power supply, SPA blank covers, Cisco ASR 1000 Series 10‑Gbps ESP [ASR1000-ESP10] or ASR 1000 Series 40‑Gbps ESP [ASR1000-ESP-40], Cisco ASR 1000 Series Route Processor 1 [RP1] [ASR1000-RP1], two Cisco ASR 1000 Series 10-Gbps SIPs [ASR1000-SIP10] or ASR1000 Series 40‑Gbps SIPs [ASR1000-SIP-40], and no SPAs)

Height: 10.5 in. (266.7 mm)

Width: 17.2 in. (437.4 mm)

Depth: 18.15 in. (461.0 mm)

Weight:

98.70 lb (44.77 kg) (with dual AC power supply, SPA, route processor, SIP blank covers, two Cisco ASR 1000 Series 10‑Gbps ESPs [ASR1000-ESP10] or ASR 1000 Series 40‑Gbps ESPs [ASR1000-ESP-40] or ASR1000 Series 100-Gbps ESPs [ASR1000-ESP100], two Cisco ASR 1000 Series RP1s [ASR1000-RP1], three Cisco ASR 1000 Series 10‑Gbps SIPs [ASR1000-SIP10] or ASR1000 Series 40‑Gbps SIPs [ASR1000-SIP-40], and no SPAs)

Height: 22.8 in. (579.1 mm)

Width: 17.2 in. (437.4 mm)

Depth: 18.15 in. (461.0 mm)

Weight:

184.0 lb (83.46 kg) (with redundant AC power supply, SPA, route processor, SIP blank covers, two Cisco ASR 1000 Series 40‑Gbps ESPs [ASR1000-ESP40] or ASR1000 Series 100-Gbps ESPs [ASR1000-ESP100] or ASR1000 Series 200-Gbps ESPs [ASR1000-ESP200], two Cisco ASR 1000 Series RP2s [ASR1000-RP2], six Cisco ASR 1000 Series 40‑Gbps SIPs [ASR1000-SIP40], and no SPAs)

Shared port adapters

1 single-height SPA slot

1 single-height SPA slot

3 SPA slots

3 SPA slots

8 SPA slots

12 SPA slots

24 SPA slots

Cisco ASR 1000 Series ESP

Integrated in chassis

Integrated in chassis

1 ESP slot

Integrated in chassis

1 ESP slot

2 ESP slots

2 ESP slots

Route Processor

Integrated in the chassis: Cisco ASR 1001 Series Route Processor with Dual Core Processor

Integrated in chassis

Integrated in chassis

Integrated in the chassis: Cisco ASR 1002-X Series Route Processor with Dual Core Processor

1 route-processor slot

2 route-processor slots

2 route-processor slots

Number of SIPs or Ethernet Line Cards supported

Integrated in chassis

Integrated in chassis

Integrated in chassis

Integrated in chassis

2

3

6

Redundancy

Software: Yes

Software: Yes

Software: Yes

Software: Yes

Software: Yes

Hardware: Yes

Hardware: Yes

Built-in Gigabit Ethernet ports

Yes: 4 Gigabit Ethernet Small Form-Factor Pluggable (SFP) ports

Yes: 4 Gigabit Ethernet SFP ports

Yes: 4 Gigabit Ethernet SFP ports

Yes: 6 Gigabit Ethernet SFP ports

0

0

0

Integrated daughter card (IDC)

Yes:

ASR1001-4XT3 provides an IDC with four built-in T3 ports

Note: E3 circuitry is not supported.

ASR1001-2XOC3POS provides an IDC with 2 built-in OC-3 PoS ports.

Note: The functions of these ports are the same as on the SPA module SPA-2XOC3-PO

ASR1001-4X1GE provides an IDC with 4 built-in Gigabit Ethernet ports

Note: The functions of these ports are the same as on the SPA module SPA-5X1GE-V2.

ASR1001-8XCHT1E1 provides an IDC with 8 built-in Channelized E1/T1 ports

Note: The functions of these ports are the same as on the SPA module SPA-8XCHT1/E1

ASR1001-HDD provides an IDC in form of a hard disk drive. Default size is 160 GB.

Note: IDCs arenot field-upgradable with the exception of the HDD on the ASR1001-HDD model.

No

No

No

No

No

No

Airflow

Front-to-back

Front-to-back

Front-to-back

Front-to-back

Front-to-back

Front-to-back

Front-to-back

Note: The 1RU and 2RU chassis (ASR1001, ASR1002, ASR1002-F, and ASR1002-X) come by default with 4‑GB DRAM. In the ASR1002 and ASR1002-F, 4 GB is required for the software-redundancy implementation, which is also of high interest for the managed CPE application. In the ASR1001 and ASR1002-X, 8 GB is required for the software redundancy implementation.

Table 9. Cisco ASR 1000 Series: Detailed Specifications

Cisco ASR 1000 Series

Cisco ASR 1001

Cisco ASR 1002 Fixed Router

Cisco ASR 1002 Router

Cisco ASR 1002-X Router

Cisco ASR 1004 Router

Cisco ASR 1006 Router

Cisco ASR 1013 Router

Embedded Services Processor

ESP support

Cisco ASR 1000 Series 2.5-Gbps ESP (default)
Upgradable through a software activated feature license to 5Gbps
Cisco ASR 1000 Series 2.5-Gbps ESP
Cisco ASR 1000 Series 5‑Gbps ESP (ASR1000-ESP5), Cisco ASR 1000 Series 10‑Gbps ESP (ASR1000-ESP10), and noncrypto Cisco ASR 1000 Series 10-Gbps ESP (ASR1000-ESP10-N)
Cisco ASR 1002-X ESP with 5-Gbps (default)
Upgradable through software activated feature license to 10, 20, or 36 Gbps
Cisco ASR 1000 Series 10‑Gbps ESP (ASR1000-ESP10), noncrypto Cisco ASR 1000 Series 10-Gbps ESP (ASR1000-ESP10-N), Cisco ASR 1000 Series 20‑Gbps ESP (ASR1000-ESP20), and Cisco ASR 1000 Series 40‑Gbps ESP (ASR1000-ESP40)
Cisco ASR 1000 Series 10-Gbps ESP (ASR1000-ESP10), noncrypto Cisco ASR 1000 Series 10-Gbps ESP (ASR1000-ESP10-N), Cisco ASR 1000 Series 20-Gbps ESP (ASR1000-ESP20), Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40), and Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100)
Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40),
Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100), and Cisco ASR 1000 Series 200-Gbps ESP (ASR1000-ESP200)

ESP bandwidth

2.5 to 5 Gbps

2.5 Gbps

5 to 10 Gbps

5 to 36 Gbps

10 to 40 Gbps

10 to 100 Gbps

40 to 200 Gbps

ESP memory

Share the same control memory on route processor
Cisco ASR 1000 Series 2.5-Gbps ESP: 1-GB DRAM default; 1‑GB DRAM maximum
Cisco ASR 1000 Series 5‑Gbps ESP (ASR1000-ESP5): 1‑GB DRAM default; 1‑GB DRAM maximum
Cisco ASR 1000 Series 10-Gbps ESP (ASR1000-ESP10): 2‑GB DRAM default; 2‑GB DRAM maximum
Share the same control memory on route processor
Cisco ASR 1000 Series 10‑Gbps ESP (ASR1000-ESP10) and ASR 1000 Series 10‑Gbps ESP (ASR1000-ESP10): 2‑GB DRAM default; 2‑GB DRAM maximum
Cisco ASR 1000 Series 20‑Gbps ESP (ASR1000-ESP20): 4‑GB DRAM default; 4‑GB DRAM maximum
Cisco ASR 1000 Series 10‑Gbps ESP (ASR1000-ESP10) and ASR 1000 Series 10‑Gbps ESP (ASR1000-ESP10): 2‑GB DRAM default; 2‑GB DRAM maximum
Cisco ASR 1000 Series 20‑Gbps ESP (ASR1000-ESP20): 4‑GB DRAM default; 4‑GB DRAM maximum
Cisco ASR 1000 Series 40‑Gbps ESP (ASR1000-ESP40): 8‑GB DRAM
Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100): 16-GB DRAM
Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40):
8-GB DRAM
Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100): 16-GB DRAM
Cisco ASR 1000 Series 200-Gbps ESP (ASR1000-ESP200): 32-GB DRAM

Route Processors

Route processor

Integrated in the chassis: Cisco ASR 1001 Series Route Processorwith Dual Core Processor; not upgradable

Integrated in the chassis: Cisco ASR 1000 Series RP1 (ASR1000-RP1); the Cisco ASR 1000 Series RP2 (ASR1000-RP2) is not supported on the Cisco ASR 1002 Fixed Router (ASR1002-F)

Integrated in the chassis: Cisco ASR 1000 Series RP1 (ASR1000-RP1)

Integrated in the chassis: Cisco ASR 1002-X Series Route Processor with Quad Core Processor; not upgradable

Cisco ASR 1000 Series RP1 (ASR1000-RP1):

Supported as a module on the Cisco ASR 1004 and ASR 1006

Cisco ASR 1000 Series RP2 (ASR1000-RP2):

Supported as a module on the Cisco ASR 1004, ASR 1006, and ASR 1013

Same as for Cisco ASR 1004

Cisco ASR 1000 Series RP2 (ASR1000-RP2):

Supported as a module on the Cisco ASR 1004, ASR 1006, and ASR 1013

Route-processor memory

Cisco ASR 1001 Route Processor: Comes with 4-GBDRAM (default); upgradable to 8- and 16-GB DRAM; 16‑GB DRAM is maximum
Cisco ASR 1001: Offers 8-GB embedded USB memory (eUSB) support (partitioned: two 32-MB partitions for nonvolatile RAM [NVRAM] and the rest for mass storage)
Cisco ASR 1000 Series RP1 (ASR1000-RP1): Is integrated in the chassis of the Cisco ASR 1002 Fixed Router
Cisco ASR 1002 Fixed Router: Comes with 4-GB DRAM (default and maximum)
Cisco ASR 1002 Fixed Router: Offers 8-GB eUSB support (partitioned: two 32-MB partitions for NVRAM and the rest for mass storage)
Cisco ASR 1000 Series RP1 (ASR1000-RP1): Is integrated in the chassis of the Cisco ASR 1002
Cisco ASR 1002: Comes with 4-GB DRAM (default and maximum)
Cisco ASR 1002: Offers 8-GB EUSB support (partitioned: two 32-MB partitions for NVRAM and the rest for mass storage)
Cisco ASR 1002-X Route Processor: Comes with 4-GBDRAM (default); upgradable to 8- and 16-GB DRAM; 16‑GB DRAM is maximum
Cisco ASR 1002-X: Offers 8-GB eUSB memory support (partitioned: two 32-MB partitions for NVRAM and the rest for mass storage)
Cisco ASR 1000 Series Route Processor (ASR1000-RP1): 2-GB DRAM default; 4‑GB DRAM maximum
1-GB eUSB memory support (partitioned: two 32-MB partitions for NVRAM and the rest for mass storage)
For mass storage: HDD (40‑GB) or solid-state drive (32‑GB) support (will be offered later)
Same as for Cisco ASR 1004
Cisco ASR 1000 Series RP2 (ASR1000-RP2):
8-GB DRAM default; 16‑GB DRAM maximum
2-GB eUSB memory support
For mass storage: HDD (80‑GB)

SIPs and Ethernet Line Cards

Integrated in chassis; not upgradable

Integrated in chassis: Cisco ASR 1000 Series 10-Gbps SIP Carrier Card (ASR1000-SIP10); not upgradable

Integrated in chassis: Cisco ASR 1000 Series 10-Gbps SIP Carrier Card (ASR1000-SIP10); not upgradable

Integrated in chassis: not upgradable

Supports Cisco ASR 1000 Series 10-Gbps SIP Carrier Card (ASR1000-SIP10) and Cisco ASR 1000 Series 40-Gbps SIP Carrier Card (ASR1000-SIP40) and ASR 1000 Fixed Ethernet Line Cards, 2x10GE + 20X1GE (ASR1000-2T+20X1GE);6x10GE(ASR1000-6TGE)

Supports Cisco ASR 1000 Series 10-Gbps SIP Carrier Card (ASR1000-SIP10) and Cisco ASR 1000 Series 40-Gbps SIP Carrier Card (ASR1000-SIP40) and ASR 1000 Fixed Ethernet Line Card, 2x10GE + 20X1GE (ASR1000-2T+20X1GE); 6x10GE(ASR1000-6TGE)

Supports Cisco ASR 1000 Series 40-Gbps SIP Carrier Card (ASR1000-SIP40) and ASR 1000 Fixed Ethernet Line Card, 2x10GE + 20X1GE (ASR1000-2T+20X1GE); 6x10GE(ASR1000-6TGE)

Embedded hardware-based encryption

Yes: On Cisco ASR 1000 Series 2.5- and 5-Gbps ESPs with up to 1.8‑Gbps crypto support throughput

Yes: On Cisco ASR 1000 Series 2.5-Gbps ESP with up to 1.0-Gbps crypto support throughput

Yes: On Cisco ASR 1000 Series 5-Gbps ESP (ASR1000-ESP5) with up to 1.8-Gbps crypto support throughput and on Cisco ASR 1000 Series 10-Gbps ESP (ASR1000-ESP10) with up to 4-Gbps crypto support throughput

Note: No support on noncrypto Cisco ASR 1000 Series 10-Gbps ESP (ASR1000-ESP10-N)

Yes: On Cisco ASR 1002-X ESP with up to 4-Gbps crypto support throughput

Yes: On Cisco ASR 1000 Series 10-Gbps ESP (ASR1000-ESP10) with up to 4 Gbps and on Cisco ASR 1000 Series 20‑Gbps ESP (ASR1000-ESP20) with up to 8-Gbps crypto support throughput

Note: No support on noncrypto Cisco ASR 1000 Series 10-Gbps ESP (ASR1000-ESP10-N)

Yes: On Cisco ASR 1000 Series 10-Gbps ESP (ASR1000-ESP10) with up to 4 Gbps, Cisco ASR 1000 Series 20-Gbps ESP (ASR1000-ESP20) with up to 8 Gbps, Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40) with up to 11-Gbps, and Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100) with up to 29-Gbps crypto support throughput

Note: No support on noncrypto Cisco ASR 1000 Series 10-Gbps ESP (ASR1000-ESP10-N)

Yes: On Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40) with up to 11 Gbps, and Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100) with up to 29-Gbps crypto support throughput, and Cisco ASR 1000 Series 200-Gbps ESP (ASR1000-ESP200) with up to 78 Gbps crypto support throughput

Minimum Cisco IOS XE Software release

Cisco IOS XE Software Release 3.2.0S (ASR1001, ASR1001-4XT3, and ASR1001-2XOC3POS);

Cisco IOS XE Software Release 3.3.0S (ASR1001-4X1GE, ASR1001-8XCHT1E1, and ASR1001-HDD)

Cisco IOS XE Software Release2.4.0

Cisco IOS XE Software Release2.1

Cisco IOS XE Software Release 3.7.0S

Same as for CiscoASR 1002

Same as for Cisco ASR 1002 except Cisco ASR 1000 Series 40‑Gbps ESP (ASR1000-ESP40) requires Cisco IOS XE Software Release 3.1.0S

Note: Cisco ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100) requires Cisco IOS XE Software Release 3.7.0S.

Cisco ASR 1000 Series 40-Gbps ESP (ASR1000-ESP40) requires CiscoIOS XE Software Release 3.1.0S, ASR 1000 Series 100-Gbps ESP (ASR1000-ESP100) requires Cisco IOS XE Software Release 3.7.0S, and ASR 1000 Series 200-Gbps ESP (ASR1000-ESP200) requires Cisco IOS XE Software Release 3.10.0S

Rack-mounting

Yes: 19-inch

Yes: 19-inch

Yes: 19-inch

Yes: 19-inch

Yes: 19-inch

Yes: 19-inch

Yes: 19-inch

Wall-mounting

No

No

No

No

No

No

No

External USB flash memory

1-GB USB flash-memory support

1-GB USB flash-memory support

1-GB USB flash-memory support

4-GB USB flash-memory support

1-GB USB flash-memory support

1-GB USB flash-memory support

1-GB USB flash-memory support

Power Requirements

Redundant power supply

Same as for Cisco ASR 1002

Yes: Dual power supplies by default; option of either AC or DC power supply

Note: A mix of one AC and one DC power supply is not supported. The spare AC and DC power supplies for Cisco ASR 1002 Fixed Router (ASR1002-F) are the same as those for Cisco ASR 1002 (ASR1002-PWR-AC= and ASR1002-PWR‑DC=, respectively).

Yes: Dual power supplies by default; option of either AC or DC power supply

Note: A mix of one AC and one DC power supply is not supported.

Same as for Cisco ASR 1002

Same as for CiscoASR 1002

Same as for CiscoASR 1002

Yes: Quad power supplies (redundant pairs) by default; option of either AC or DC power supplies

Note: A mix of AC and DC power supplies is not supported.

Power input

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Worldwide ranging AC (85to 264V; 120 or 240V; 60or 50Hz nominal)

Worldwide ranging DC

(-40.5 to -72:

-48V nominal)

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Worldwide ranging AC (180to 264V; 240V; 60 or 50Hz nominal)

Worldwide ranging DC

(-40.5 to -72; -48V nominal)

Power consumption

Maximum (DC): 500W
Maximum (AC): 471W
Maximum (out): 400W
Maximum (DC): 590W
Maximum (AC): 560W
Maximum (out): 470W
Maximum (DC): 590W
Maximum (AC): 560W
Maximum (out): 470W
Maximum (DC): 590W
Maximum (AC): 560W
Maximum (out): 470W
Maximum (DC): 1020W
Maximum (AC): 960W
Maximum (out): 765W
Maximum (DC): 1700W
Maximum (AC): 1600W
Maximum (out): 1275W

Or

Maximum (DC): 2100W
Maximum (AC- high line): 2000W
Maximum (out): 1695W
Maximum (DC): 4200W
Maximum (AC- high line): 4000W
Maximum (out): 3390W

Airflow

Front-to-back

Front-to-back

Front-to-back

Front-to-back

Front-to-back

Front-to-back

Front-to-back

Environmental Specifications

Operating temperature (nominal)

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

41 to 104ºF

(5 to 40ºC)

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Operating temperature (short-term)

-

Same as for Cisco ASR 1002

23 to 131°F

(-5 to 55°C)

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Operating humidity (nominal) (relative humidity)

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

10 to 85%

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Operating humidity (short-term)

-

Same as for Cisco ASR 1002

5 to 90%

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Storage temperature

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

-38 to 150°F

(-39 to 70°C)

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Storage humidity (relative humidity)

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

5 to 95%

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Operating Altitude

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

-60 to 4000m (up to 2000m conforms to IEC/EN/UL/CSA 60950 requirements)

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Regulatory Compliance

Network Equipment Building Standards (NEBS)

-

Same as for Cisco ASR 1002

GR-1089 and GR-63

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

EMC standards

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

FCC 47 CFR Part 15 ClassA
VCCI ClassA
AS/NSZ ClassA
ICES-003 Class A
EN55022/CISPR 22 Information Technology Equipment (Emissions)
EN55024/CISPR 24 Information Technology Equipment (Immunity)
EN300 386 Telecommunications Network Equipment (EMC)
EN50082-1/EN61000-6-1 Generic Immunity Standard
KN22 ClassA

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

CE marking

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

UL60950-1
CSA C22.2 No.60950-1-03
EN 60950-1
IEC 60950-1
AS/NZS 60950.1

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Same as for Cisco ASR 1002

Table 10. Supported SPAs on the Cisco ASR 1000 Series

Product Description

Form Factor

Product Number

Serial and Channelized SPA

Cisco 8-Port Channelized T1/E1 Shared Port Adapter

Single height

SPA-8XCHT1/E1

Cisco 4-Port Channelized T3 (DS-0) Shared Port Adapter

Single height

SPA-4XCT3/DS0

Cisco 2-Port Channelized T3 (DS-0) Shared Port Adapter

Single height

SPA-2XCT3/DS0

Cisco 2-Port Clear Channel T3/E3 Shared Port Adapter

Single height

SPA-2XT3/E3

Cisco 4-Port Clear Channel T3/E3 Shared Port Adapter

Single height

SPA-4XT3/E3

Cisco 8-Port Clear Channel T3/E3 Shared Port Adapter

Single height

SPA-8XT3/E3

Cisco 1-Port Channelized STM-1/OC-3c to DS-0 Shared Port Adapter

Single height

SPA-1XCHSTM1/OC3

Cisco 1-Port Channelized OC-12/STM-4 SPA

Double height

SPA-1XCHOC12/DS0

Cisco 4 Port Serial SPA

Single height

SPA-4XT-SERIAL

Ethernet SPA

Cisco 4-Port 10BASE-T/100BASE Fast Ethernet Shared Port Adapter, V-2

Single height

SPA-4X1FE-TX-V2

Cisco 8-Port 10BASE-T/100BASE Fast Ethernet Shared Port Adapter, V-2

Single height

SPA-8X1FE-TX-V2

Cisco 2-Port Gigabit Ethernet Shared Port Adapter, Version 2

Single height

SPA-2X1GE-V2

Cisco 5-Port Gigabit Ethernet Shared Port Adapter, Version 2

Single height

SPA-5X1GE-V2

Cisco 8-Port Gigabit Ethernet Shared Port Adapter, Version 2

Single height

SPA-8X1GE-V2

Cisco 10-Port Gigabit Ethernet Shared Port Adapter, Version 2

Double height

SPA-10X1GE-V2

Cisco 1-Port 10 Gigabit Ethernet Shared Port Adapter, Version 2

Single height

SPA-1X10GE-L-V2

Cisco 1-Port 10 Gigabit Ethernet LAN/WAN-PHY Shared Port Adapter

Single height

SPA-1X10GE-WL-V2

Packet over SONET/SDH (PoS)

Cisco 2-Port OC3-c/STM-1c PoS Shared Port Adapter

Single height

SPA-2XOC3-POS

Cisco 4-Port OC3-c/STM-1c PoS Shared Port Adapter

Single height

SPA-4XOC3-POS

Cisco 4-Port OC3-c/STM-1c PoS Shared Port Adapter, Version 2

Single height

SPA-4XOC3-POS-V2

Cisco 8-Port OC3-c/STM-1c PoS Shared Port Adapter

Single height

SPA-8XOC3-POS

Cisco 1-Port Channelized STM-1/OC-3c to DS-0 Shared Port Adapter

Single height

SPA-1XCHSTM1/OC3

Cisco 1-Port OC-12c/STM-4c PoS Shared Port Adapter

Single height

SPA-1XOC12-POS

Cisco 2-Port OC-12c/STM-4 PoS Shared Port Adapter

Single height

SPA-2XOC12-POS

Cisco 4-Port OC-12c/STM-4 PoS Shared Port Adapter

Single height

SPA-4XOC12-POS

Cisco 8-Port OC-12c/STM-4 PoS Shared Port Adapter

Single height

SPA-8XOC12-POS

Cisco 1-Port OC-48/STM-16 POS/RPR Shared Port Adapter

Single height

SPA-1XOC48POS/RPR

Cisco 2-Port OC-48/STM-16 POS/RPR Shared Port Adapter

Single height

SPA-2XOC48POS/RPR

Cisco 4-Port OC-48/STM-16 POS/RPR Shared Port Adapter

Single height

SPA-4XOC48POS/RPR

Cisco 1-Port OC-192c/STM-64c POS/RPR Shared Port Adapter with XFP Optics

Single height

SPA-OC192POS-XFP

ATM SPA

Cisco 1-Port OC3c/STM1c ATM Shared Port Adapter

Single height

SPA-1XOC3-ATM-V2

Cisco 3-Port OC3c/STM1c ATM Shared Port Adapter

Single height

SPA-3XOC3-ATM-V2

Cisco 1-Port OC12c/STM4c ATM Shared Port Adapter

Single height

SPA-1XOC12-ATM-V2

Clocking/Sync SPA

Synchronous Ethernet SPA

Single height

SPA-2X1GE-SYNCE

Service SPA

Cisco SPA, WebEx Node for ASR 1000 Series

Double height

SPA-WMA-K9

Digital Signal Processor SPA

Single height

SPA-DSP

CEOP (Circuit Emulation Over Packet) SPA

1 Port Channelized OC3/STM-1 ATM and Circuit Emulation SPA

Single height

SPA-1CHOC3-CE-ATM

Cisco 2-Port T3/E3 Circuit Emulation and ATM SPA

Single height

SPA-2CHT3-CE-ATM

Cisco 24-Port T1/E1/J1 Circuit Emulation and ATM SPA

Single height

SPA-24CHT1-CE-ATM

This list will be extended over time. Please check with your local Cisco account representative for information about the latest SPA, SFP, and optics support on the Cisco ASR 1000 Series Routers or check the Cisco ASR 1000 price list.

Availability

The Cisco ASR 1000 Series is orderable and shipping.

Ordering Information

To place an order, visit the Cisco Ordering Home Page and refer to Tables 11 through 14.

Table 11 gives hardware component ordering information, and Table 12 gives software (consolidated packages) and license ordering information for the Cisco ASR 1000 Series with the exception of the Cisco ASR 1001 and ASR 1002-X Routers. For the Cisco ASR 1001 and ASR 1002-X, this information is provided in Table 13.

Table 14 gives the respective software spare ordering information. If you need to purchase a Cisco ASR 1001 or ASR 1002-X spare license (for example, for a technology package upgrade from IP Base to Advanced Enterprise Services, or for a performance upgrade from 2.5 to 5 Gbps on the Cisco ASR 1001 chassis or from 5 to 10, 20, or 36 Gbps on the Cisco ASR 1002-X chassis, or for a feature that requires a license and the license had not been purchased at time of order), two types of spare licenses are available: the SLASR1-xxx-=, which provides a product activation key (PAK) or license file through paper delivery, and the L-SLASR1-xxx-=, which provides a PAK or license file through eDelivery. The spares can also be purchased as a “multiuse PAK” by either ordering SLFL-ASR1= (forpaper delivery) or L-SLFL-ASR1= (for eDelivery).

Not all of the available product numbers are listed in Tables 11, 12, and 13. For additional product numbers, including the Cisco ASR 1000 Series bundle offerings, please check the Cisco price list or contact your local Cisco account representative. More details about the Cisco ASR 1000 Series Bundles and how to order the Cisco ASR 1000 Series is also provided in the Cisco ASR 1000 Ordering Guide.

Table 11. Ordering Information for Cisco ASR 1000 Series Hardware

Product Number

Product Description

Cisco ASR 1000 Series Chassis

ASR1001

Cisco ASR1001 System, 4 Built-In GE, Dual P/S

ASR1001=

Cisco ASR1001 System, 4 Built-In GE, Dual P/S, Spare

ASR1001-2XOC3POS

Cisco ASR1001 System, 4 Built-In GE, OC3 IDC, Dual P/S

ASR1001-2OC3POS=

Cisco ASR1001 System, 4 Built-In GE, OC3 IDC, Dual P/S, Spare

ASR1001-4XT3

Cisco ASR1001 System, 4 Built-In GE, T3 IDC, Dual P/S

ASR1001-4XT3=

Cisco ASR1001 System, 4 Built-In GE, T3 IDC, Dual P/S, Spare

ASR1001-4X1GE

Cisco ASR1001 System, 4 Built-In GE, 4X1GE IDC, Dual P/S

ASR1001-4X1GE=

Cisco ASR1001 System, 4 Built-In GE, 4X1GE IDC, Dual P/S, Spare

ASR1001-8XCHT1E1

Cisco ASR1001 System, 4 Built-In GE, CHT1 IDC, Dual P/S

ASR1001-8XCHT1E1=

Cisco ASR1001 System, 4 Built-In GE, CHT1 IDC, Dual P/S, Spare

ASR1001-HDD

Cisco ASR1001 System, 4 Built-In GE, HDD, Dual P/S

ASR1001-HDD=

Cisco ASR1001 System, 4 Built-In GE, HDD, Dual P/S, Spare

ASR1002-F

Cisco ASR1002 System, Fixed ESP, 4 Built-In GE, 4GB DRAM

ASR1002-F=

Cisco ASR1002 System, Fixed ESP, 4 Built-In GE, 4GB DRAM, Spare

ASR1002

Cisco ASR1002 Chassis, 4 Built-In GE, Dual P/S, 4GB DRAM

ASR1002=

Cisco ASR1002 Chassis, 4 Built-In GE, Dual P/S, 4GB DRAM, Spare

ASR1002-X

Cisco ASR1002-X System, Crypto, 6 Built-In GE, Dual P/S

ASR1002-X=

Cisco ASR1002-X System, Crypto, 6 Built-In GE, Dual P/S, Spare

ASR1004

Cisco ASR1004 Chassis, Dual P/S

ASR1004=

Cisco ASR1004 Chassis, Dual P/S, Spare

ASR1006

Cisco ASR1006 Chassis, Dual P/S

ASR1006=

Cisco ASR1006 Chassis, Dual P/S, Spare

ASR1013

Cisco ASR1013 Chassis, Redundant P/S

ASR1013=

Cisco ASR1013 Chassis, Redundant P/S, Spare

Cisco ASR 1000 Series Embedded Services Processor

ASR1000-ESP5

ASR1K Embedded Services Processor, 5Gbps, Crypto, ASR1002 Only

ASR1000-ESP5=

ASR1K Embedded Services Processor, 5G, Crypto, 1002 only, Spare

ASR1000-ESP10

Cisco ASR1000 Embedded Services Processor, 10G

ASR1000-ESP10=

Cisco ASR1000 Embedded Services Processor, 10G, Spare

ASR1000-ESP10-N

Cisco ASR1000 Embedded Services Processor, 10G, Non Crypto

ASR1000-ESP10-N=

Cisco ASR1000 Embedded Services Processor, 10G, Non Crypto, Spare

ASR1000-ESP20

Cisco ASR1000 Embedded Services Processor, 20G

ASR1000-ESP20=

Cisco ASR1000 Embedded Services Processor, 20G, Spare

ASR1000-ESP40

Cisco ASR1000 Embedded Services Processor, 40G

ASR1000-ESP40=

Cisco ASR1000 Embedded Services Processor, 40G Spare

ASR1000-ESP100

Cisco ASR1000 Embedded Services Processor, 100G

ASR1000-ESP100=

Cisco ASR1000 Embedded Services Processor, 100G Spare

ASR1000-ESP200

Cisco ASR1000 Embedded Services Processor, 200G

ASR1000-ESP200=

Cisco ASR1000 Embedded Services Processor, 200G Spare

Cisco ASR 1000 Series Route Processor

ASR1000-RP1

Cisco ASR1000 Route Processor 1, 2GB DRAM

ASR1000-RP1=

Cisco ASR1000 Route Processor 1, 2GB DRAM, Spare

ASR1000-RP2

Cisco ASR1000 Route Processor 2, 8GB DRAM

ASR1000-RP2=

Cisco ASR1000 Route Processor 2, 8GB DRAM, Spare

Cisco ASR 1000 Series SPA Interface Processor and Ethernet Line Cards

ASR1000-SIP10

Cisco ASR1000 SPA Interface Processor 10

ASR1000-SIP10=

Cisco ASR1000 SPA Interface Processor 10, Spare

ASR1000-SIP40

Cisco ASR1000 SPA Interface Processor 40

ASR1000-SIP40=

Cisco ASR1000 SPA Interface Processor 40, SPARE

ASR1000-6TGE

Cisco ASR 1000 Fixed Ethernet Line Card, 6X10GE

ASR1000-6TGE=

Cisco ASR 1000 Fixed Ethernet Line Card, 6X10GE, Spare

ASR1000-2T+20X1GE

Cisco ASR 1000 Fixed Ethernet Line Card, 2X10GE + 20X1GE

ASR1000-2T+20X1GE=

Cisco ASR 1000 Fixed Ethernet Line Card, 2X10GE + 20X1GE, Spare

Cisco ASR 1000 Series USB Memory Options

MEMUSB-1024FT

1GB USB Flash Token for Cisco ASR 1000 Series

MEMUSB-1024FT=

1GB USB Flash Token for Cisco ASR 1000 Series, Spare

Table 12. Ordering Information for Cisco ASR 1000 Series Software Consolidated Packages and Licenses with the Exception of the Cisco ASR 1001 and ASR 1002-X

Product Number

Product Description

Cisco ASR 1000 Series Consolidated Packages

SASR1R1-IPB

Cisco ASR 1000 Series RP1 IP Base without Crypto

SASR1R1-IPBK9

Cisco ASR 1000 Series RP1 IP BASE

SASR1R1-AISK9

Cisco ASR 1000 Series RP1 Advanced IP Services

SASR1R1-AIS

Cisco ASR 1000 Series RP1 Advanced IP Services without Crypto

SASR1R1-AESK9

Cisco ASR 1000 Series RP1 Advanced Enterprise Services

SASR1R1-AES

Cisco ASR 1000 Series RP1 Advanced Enterprise Services without Crypto

SASR1R2-IPB

Cisco ASR 1000 Series RP2 IP Base without Crypto

SASR1R2-IPBK9

Cisco ASR 1000 Series RP2 IP Base

SASR1R2-AISK9

Cisco ASR 1000 Series RP2 Advanced IP Services

SASR1R2-AIS

Cisco ASR 1000 Series RP2 Advanced IP Services without Crypto

SASR1R2-AESK9

Cisco ASR 1000 Series RP2 Advanced Enterprise Services

SASR1R2-AES

Cisco ASR 1000 Series RP2 Advanced Enterprise Services without Crypto

Cisco ASR 1000 Series Licenses

Cisco ASR 1000 Series Licenses-Security

FLASR1-IPSEC-RTU

Encryption Right-To-Use Feature Lic for ASR1000 Series

FLASR1-FPI-RTU

Flex. Pack. Insp. Right-To-Use Feat Lic for ASR1000 Series

FLASR1-FW-RTU

Firewall Right-To-Use Feature Lic for ASR1000 Series

FLASR1-FWNAT-RED

Firewall/NAT Stateful Inter-Chassis Redundancy License

Cisco ASR 1000 Series Licenses-Software Redundancy

FLASR1-IOSRED-RTU

SW Redundancy Right-To-Use Feat Lic for ASR1000 Series

Cisco ASR 1000 Series Licenses-Application Visibility and Control

FLASR1-AVC-RTU

Appl. Visibility & Control RTU Feat. Lic for ASR1000 Series

Cisco ASR 1000 Series Licenses-Lawful Intercept

FLASR1-LI-RTU

ASR1000 Lawful Intercept RTU

Cisco ASR 1000 Series Licenses-Broadband

FLASR1-BB-RTU

Broadband Right-To-Use Feature Lic for ASR1000 Series

FLASR1-BB-4K

Broadband 4K Sessions Feature Lic for ASR1000 Series

FLASR1-BB-16K

Broadband 16K Sessions Feature Lic for ASR1000 Series

FLASR1-BB-32K

Broadband 32K Sessions Feature Lic for ASR1000 Series

FLASR1-BB-48K

Broadband up to 48K Sessions Feature Lic for ASR1000 Series

FLASR1-BB-64K

Broadband up to 64K Sessions Feature Lic for ASR1000 Series

Cisco ASR 1000 Series Licenses-Cisco Unified Border Element - Service Provider Edition

FLASR1-CUBES-250P

CUBE(SP) 250 Calls Perpetual Lic for ASR 1000 Series

FLASR1-CUBES-2KP

CUBE(SP) 2K Calls Perpetual Lic for ASR 1000 Series

FLASR1-CUBES-4KP

CUBE(SP) 4K Calls Perpetual Lic for ASR 1000 Series

FLASR1-CUBES-10KP

CUBE(SP) 10KCalls Perpetual Lic for ASR 1000 Series

FLASR1-CUBES-16KP

CUBE(SP) 16KCalls Perpetual Lic for ASR 1000 Series

FLASR1-CUBES-32KP

CUBE(SP) 32K Calls Perpetual Lic for ASR 1000 Series

FLASR1-CUBES-LAB

CUBE(SP) Lab Use Only Lic for ASR 1000 Series

FLASR1-CUBES-TPEX

CUBE(SP) Perpetual Lic for ASR 1000 Series in B2BTP Exchange

NOTE: For the complete list of Cisco ASR 1000 Feature Licenses including Product Numbers for the Cisco Unified Border Element - Enterprise Edition, please consult the Cisco ASR 1000 Price List. For Cisco ASR 1000 demo licenses to test the Cisco ASR 1000 Series in the lab, please contact your local Cisco representative.

Table 13. Ordering Information for Cisco ASR 1001 and ASR 1002-X Router Software Consolidated Packages and Licenses Note: For the complete list of feature licenses enforced by software activation, please consult the Cisco ASR 1000 Price List.

Product Number

Product Description

Cisco ASR1001 IOS XE Software Universal Software

SASR1001UK

Cisco ASR1001 IOS XE UNIVERSAL

SASR1001NPEK9

Cisco ASR1001 IOS XE - NO PAYLOAD ENCRYPTION UNIVERSAL

SASR1001UK9

Cisco ASR1001 IOS XE - ENCRYPTION UNIVERSAL

Cisco ASR1002-X IOS XE Software Universal Software

SASR1K2XUK

Cisco ASR1002-X IOS XE UNIVERSAL

SASR1K2XNPEK9

Cisco ASR1002-X IOS XE - NO PAYLOAD ENCRYPTION UNIVERSAL

SASR1K2XUK9

Cisco ASR1002-X IOS XE - ENCRYPTION UNIVERSAL

ASR1001/ASR 1002-X Technology Package Licenses

SLASR1-IPB

Cisco ASR 1000 IP BASE License

SLASR1-AIS

Cisco ASR 1000 Advanced IP Services License

SLASR1-AES

Cisco ASR 1000 Advanced Enterprise Services License

SLASR1-IPB=

Cisco ASR 1000 IP BASE Paper PAK

L-SLASR1-IPB

Cisco ASR 1000 IP BASE E-Delivery PAK

ASR1001/ASR 1002-X Technology Upgrade Licenses

SLASR1-IPB-AIS=

Cisco ASR 1000 IPB to AIS Upgrade Paper PAK

SLASR1-IPB-AES=

Cisco ASR 1000 IPB to AES Upgrade Paper PAK

SLASR1-AIS-AES=

Cisco ASR 1000 AIS to AES Upgrade Paper PAK

L-SLASR1-IPB-AIS=

Cisco ASR 1000 IPB to AIS Upgrade E-Delivery PAK

L-SLASR1-IPB-AES=

Cisco ASR 1000 IPB to AES Upgrade E-Delivery PAK

L-SLASR1-AIS-AES=

Cisco ASR 1000 AIS to AES Upgrade E-Delivery PAK

Cisco ASR1001 Feature Licenses: Enforced with PAK

FLSASR1001-5G

Upgrade from 2.5 Gbps to 5Gbps License for ASR 1001

FLSASR1001-5G=

Upgrade from 2.5 Gbps to 5Gbps Paper PAK for ASR 1001

L-FLSASR1001-5G=

Upgrade from 2.5 Gbps to 5Gbps E-Delivery PAK for ASR 1001

Cisco ASR1002-X Feature Licenses: Enforced with PAK

FLSA1-2X-5-10G

Upgrade from 5 Gbps to 10Gbps License for ASR 1002-X

FLSA1-2X-5-10G=

Upgrade from 5 Gbps to 10Gbps Paper PAK for ASR 1002-X

L-FLSA1-2X-5-10G=

Upgrade from 5 Gbps to 10Gbps E-Delivery PAK for ASR 1002-X

FLSA1-2X-5-20G

Upgrade from 5 Gbps to 20Gbps License for ASR 1002-X

FLSA1-2X-5-20G=

Upgrade from 5 Gbps to 20Gbps Paper PAK for ASR 1002-X

L-FLSA1-2X-5-20G=

Upgrade from 5 Gbps to 20Gbps E-Delivery PAK for ASR 1002-X

FLSA1-2X-5-36G

Upgrade from 5 Gbps to 36Gbps License for ASR 1002-X

FLSA1-2X-5-36G=

Upgrade from 5 Gbps to 36Gbps Paper PAK for ASR 1002-X

L-FLSA1-2X-5-36G=

Upgrade from 5 Gbps to 36Gbps E-Delivery PAK for ASR 1002-X

FLSA1-2X-10-20G

Upgrade from 10 Gbps to 20Gbps License for ASR 1002-X

FLSA1-2X-10-20G=

Upgrade from 10 Gbps to 20Gbps Paper PAK for ASR 1002-X

L-FLSA1-2X-10-20G=

Upgrade from 10 Gbps to 20Gbps E-Delivery PAK for ASR 1002-X

FLSA1-2X-10-36G

Upgrade from 10Gbps to 36Gbps License for ASR 1002-X

FLSA1-2X-10-36G=

Upgrade from 10Gbps to 36Gbps Paper PAK for ASR 1002-X

L-FLSA1-2X-10-36G=

Upgrade from 10Gbps to 36Gbps E-Delivery PAK for ASR 1002-X

FLSA1-2X-20-36G

Upgrade from 20Gbps to 36Gbps License for ASR 1002-X

FLSA1-2X-20-36G=

Upgrade from 20Gbps to 36Gbps Paper PAK for ASR 1002-X

L-FLSA1-2X-20-36G=

Upgrade from 20Gbps to 36Gbps E-Delivery PAK for ASR 1002-X

Cisco ASR 1001/ASR 1002-X IOS XE Feature Licenses: Not Enforced

Software Redundancy

FLSASR1-IOSRED

SW Redundancy License for ASR1000 Series

FLSASR1-IOSRED=

SW Redundancy Paper PAK for ASR1000 Series

L-FLSASR1-IOSRED=

SW Redundancy E-Delivery PAK for ASR1000 Series

Security

FLSA1-2X-IPS4G

IPSEC License for ASR1002-X 4G crypto BW

FLSA1-2X-IPS4G=

IPSEC Paper PAK for ASR1002-X 4G crypto BW

L-FLSA1-2X-IPS4G=

IPSEC E-Delivery PAK for ASR1002-X 4G Crypto BW

FLSASR1-IPSEC

IPSEC License for ASR1000 Series

FLSASR1-IPSEC=

IPSEC Paper PAK for ASR1000 Series

L-FLSASR1-IPSEC=

IPSEC E-Delivery PAK for ASR1000 Series

FLSASR1-FPI

Flex. Pack. Insp License for ASR1000 Series

FLSASR1-FPI=

Flex. Pack. Insp Paper PAK for ASR1000 Series

L-FLSASR1-FPI=

Flex. Pack. Insp E-Delivery PAK for ASR1000 Series

FLSASR1-FW

FW License for ASR1000 Series

FLSASR1-FW=

FW Paper PAK for ASR1000 Series

L-FLSASR1-FW=

FW E-Delivery PAK for ASR1000 Series

FLSASR1-FWNAT-R

Firewall/NAT Stateful Inter-Chassis Redundancy License

FLSASR1-FWNAT-R=

Firewall/NAT Stateful Inter-Chassis Redundancy Paper PAK for ASR1000 Series

L-FLSASR1-FWNAT-R=

Firewall/NAT Stateful Inter-Chassis Redundancy E-Delivery PAK for ASR1000 Series

Application Visibility and Control

FLSASR1-AVC

Appl. Visibility & Control License for ASR1000 Series

FLSASR1-AVC=

Appl. Visibility & Control Paper PAK for ASR1000 Series

L-FLSASR1-AVC=

Appl. Visibility & Control E-Delivery PAK for ASR1000 Series

Lawful Intercept

FLSASR1-LI

Lawful Intercept License for ASR1000 Series

FLSASR1-LI=

Lawful Intercept Paper PAK for ASR1000 Series

L-FLSASR1-LI=

Lawful Intercept E-Delivery PAK for ASR1000 Series

Broadband

FLSASR1-BB

Broadband RTU and 500 Sessions License for ASR1000 Series

FLSASR1-BB=

BB RTU and 500 Sessions Paper PAK for ASR1000 Series

L-FLSASR1-BB=

BB RTU and 500 Sessions E-Delivery PAK for ASR1000 Series

FLSASR1-BB-4K

Broadband 4K Sessions for ASR1000 Series

FLSASR1-BB-4K=

Broadband 4K Sessions Paper PAK for ASR1000 Series

L-FLSASR1-BB-4K=

Broadband 4K Sessions E-Delivery PAK for ASR1000 Series

FLSASR1-BB-16K

Broadband 16K Sessions for ASR1000 Series

FLSASR1-BB-16K=

Broadband 16K Sessions Paper PAK for ASR1000 Series

L-FLSASR1-BB-16K=

Broadband 16K Sessions E-Delivery PAK for ASR1000 Series

FLSASR1-BB-32K

Broadband 32K Sessions for ASR1000 Series

FLSASR1-BB-32K=

Broadband 32K Sessions Paper PAK for ASR1000 Series

L-FLSASR1-BB-32K=

Broadband 32K Sessions E-Delivery PAK for ASR1000 Series

NOTE: For the complete list of Cisco ASR 1001 Feature Licenses not enforced via Software Activation including Product Numbers for the Cisco Unified Border Element - Service Provider Edition and Enterprise Edition, please consult the Cisco ASR 1000 Price List. For Cisco ASR 1000 demo licenses to test the Cisco ASR 1000 Series in the lab, please contact your local Cisco representative.

All Cisco IOS XE Software Route Processor 1 consolidated packages are compatible across the entire Cisco ASR 1000 Series with the Cisco ASR 1000 Series RP1 (ASR1000-RP1), and the Cisco IOS XE Software Route Processor 2 consolidated packages are compatible across the entire Cisco ASR 1000 Series with the Cisco ASR 1000 Series RP2 (ASR1000-RP2).

For the Cisco ASR 1001 and ASR 1002-X, you must select one of the Cisco ASR 1001 or ASR 1002-X universal consolidated packages as well as one of the technology package licenses (SLASR1-IPB, SLASR1-AIS, or SLASR1-AES).

Example 1 for Cisco ASR 1001: For the IP Base software feature set, you must select the universal image SASR1001U and the technology package license SLASR1-IPB, which enforces the IP Base feature set.

Example 2 for Cisco ASR 1001: For the AESK9 software feature set, you must select the universal image SASR1001UK9 and the technology package license SLASR1-AES, which enforces the AESK9 feature set. Please note that some functions, for example, IPsec or Firewall, require selection of an additional feature license; that is, if you want to deploy encryption, for example, you need to purchase the universal software image and respective technology package license that contains the support for encryption as well as the IPsec feature license. Using this example, you need to purchase the following part numbers:

SASR1001UK9-37S (universal K9 software image): for Cisco IOS XE Software Release 3.7.0S)

SLASR1-AES (technology package license - enforced)

FLSASR1-IPSEC (feature license - honor-based)

Note: All licenses on the Cisco ASR 1001 and ASR 1002-X with the exception of the performance upgrade license from 2.5 to 5 Gbps (for Cisco ASR 1001) or from 5 to 10 to 20 to 36 Gbps (for Cisco ASR 1002-X) are not enforced but are honor-based. To download any of the Cisco ASR 1000 Series consolidated packages and Cisco ASR 1001 and ASR 1002-X universal images of a specific Cisco IOS XE Software release, go to Download Software, click “Router Software”, and go to Cisco ASR 1000 Series Aggregation Services Routers.

Table 14. Ordering Information for Cisco ASR 1000 Series Software Spares

Product Number

Product Description

Cisco ASR 1000 Series Software Spare

ASR1000-SW-SPARECD

Cisco ASR 1000 Series Software Spare CD

CDASR1000R1-IPB=

Cisco ASR 1000 RP1 IP Base without Crypto, Spare

CDASR1000R1-IPBK9=

Cisco ASR 1000 RP1 IP Base, Spare

CDASR1000R1-AISK9=

Cisco ASR 1000 RP1 Advanced IP Services, Spare

CDASR1000R1-AESK9=

Cisco ASR 1000 RP1 Advanced Enterprise Services, Spare

Upgrade Paths

Cisco ASR 1000 Series Routers are included in the standard Cisco Technology Migration Program (TMP). Refer to http://www.cisco.com/go/TMP and contact your local Cisco account representative for program details.

Cisco Services for the Enterprise WAN Edge

Cisco and our certified partners can help make your enterprise WAN edge deployment a success with a broad portfolio of services based on proven methodologies. We can help you establish a secure, resilient WAN architecture and successfully integrate security and Cisco Unified Communications technologies with bandwidth to support video, collaboration, branch-office solutions, and growth in alignment with your business goals.

The Cisco Lifecycle approach to services defines the requisite activities at each phase of the solution lifecycle. Planning and design services expedite solution adoption. Award-winning technical support increases operational efficiency. Optimization services improve performance, resiliency, stability, and predictability and prepare your network and teams for change. For more information, please visit http://www.cisco.com/go/services.

For More Information

For more information about the Cisco ASR 1000 Series, visit http://www.cisco.com/go/asr1000 or contact your local Cisco account representative. For information about the Cisco ASR 1000 Series bundles, please refer to the CiscoASR 1000 Ordering Guide.