Dial Technologies Configuration Guide, Cisco IOS Release 15.2S - V.92 Reporting Using RADIUS Attribute v.92-info [Support]

V.92 Reporting Using RADIUS Attribute v.92-info

Contents

Prerequisites for V.92 Reporting Using RADIUS
Attribute v.92-info

Restrictions for V.92 Reporting Using RADIUS Attribute v.92-info

Information About V.92 Reporting Using RADIUS Attribute v.92-info

V.92 Standard Overview

VSA v.92-info

How to Monitor and Verify V.92 Call Information

Monitoring V.92 Call Information

Examples

Verifying V.92 Call Information

Examples

Troubleshooting Tips

Additional References

V.92 Reporting Using RADIUS Attribute v.92-info

The V.92 Reporting Using RADIUS Attribute v.92-info feature provides the ability to track V.92 call information, such as V.92 features that are supported, the Quick Connect feature set that was attempted, the duration for which the original call was put on hold, and how many times Modem On Hold was initiated. The vendor-specific attribute (VSA) v.92-info is included in accounting "start" and "stop" records when modems negotiate a V.92 connection.

Feature Specifications for the V.92 Reporting Using RADIUS Attribute v.92-info Feature


Feature History
Release	Modification
12.3(1)	This feature was introduced.
Supported Platforms
Cisco AS5300, Cisco AS5350, Cisco AS5400, Cisco AS5800, Cisco AS5850

Finding Support Information for Platforms and Cisco IOS Software Images

Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image support. Access Cisco Feature Navigator at http://www.cisco.com/go/fn. You must have an account on Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at the login dialog box and follow the instructions that appear.

•Prerequisites for V.92 Reporting Using RADIUS Attribute v.92-info

•Restrictions for V.92 Reporting Using RADIUS Attribute v.92-info

•Information About V.92 Reporting Using RADIUS Attribute v.92-info

•Monitoring V.92 Call Information

•Verifying V.92 Call Information

•Additional References

•Command Reference

Prerequisites for V.92 Reporting Using RADIUS
Attribute v.92-info

Before the network access server (NAS) can send attribute v.92-info information in accounting "start" and "stop" records, you must perform the following tasks:

•Configure your NAS for authentication, authorization, and accounting (AAA) and to accept incoming modem calls.

•Enable AAA accounting by using the aaa accounting network default start-stop group radius command in global configuration mode.

•Familiarize yourself with the V.92 Quick Connect feature. Refer to the following document:

–V.92 Quick Connect for Cisco AS5300 and Cisco AS5800 Universal Access Servers

•Familiarize yourself with the V.92 Modem on Hold feature. Refer to the following document:

–V.92 Modem on Hold for Cisco AS5300 and Cisco AS5800 Universal Access Servers

Restrictions for V.92 Reporting Using RADIUS Attribute v.92-info

•If V.92 is not negotiated on your server, V.92 information will not be included in the accounting record.

•Because the attribute v.92-info information is sent as a Cisco VSA, if you configure your RADIUS server as nonstandard (using a non-Cisco server), the V.92 call information will not be sent by default. However, you can still get the V.92 call information by first configuring the radius-server vsa send command with the accounting keyword (that is, radius-server vsa send accounting).

Information About V.92 Reporting Using RADIUS Attribute v.92-info

Before you use the V.92 Reporting Using RADIUS Attribute v.92-info feature, you must understand the following concepts:

•V.92 Standard Overview

•VSA v.92-info

V.92 Standard Overview

The International Telecommunication Union Telecommunication Standardization Sector (ITU-T) V.92 standard encompasses a number of specifications, including Quick Connect (QC), which dramatically improves how quickly users can connect with their Internet service provider (ISP), and Modem on Hold (MoH), which enables users to suspend and reactivate their dial-up connection to either receive or initiate a telephone call. V.92 also includes pulse code modulation (PCM) upstream, which boosts the upstream data rates from the user to the ISP to reduce transfer times for large files and e-mail attachments sent by the user.

VSA v.92-info

The VSA v.92-info information in RADIUS accounting "start" and "stop" records can help you track V.92 feature set information. The VSA is enabled by default for all sessions that reside over a modem call that is connected using V.92 model modulation.

The VSA information is displayed in the "start" and "stop" records as follows:

v92-info=<V.92 features supported>/<QC Exchange>/<Total MOH time>/<MOH count>

The VSA v92-info has the following four subfields:

•V.92 features supported—All features that are available for the V.92 modem user who is dialing in. These features include QC, MoH, and PCM Upstream.

•QC Exchange—If QC was initiated, this subfield states what feature set (within QC) was attempted.

•Total MOH time—If MoH was initiated, this subfield indicates the duration for which the original call was put on hold.

•MOH count—If MOH was initiated, this field indicates how many times the MOH was initiated.

The following is an example of VSA v92-info information displayed in an accounting record:

v92-info=V.92 QC MOH/QC Requested/60/1

How to Monitor and Verify V.92 Call Information

The following sections include tasks to help you monitor and verify V.92 call information:

•Monitoring V.92 Call Information

•Verifying V.92 Call Information

Monitoring V.92 Call Information

To monitor the V.92 information in the accounting "start" and "stop" records, you can perform the following task using some or all of the debug commands that are listed:

SUMMARY

1. enable

2. debug aaa accounting

3. debug aaa authentication

4. debug aaa authorization

5. debug isdn event

6. debug modem csm [slot/port | group group-number]

7. debug ppp {negotiation | authentication}

8. debug radius

DETAILED STEPS


	Command or Action	Purpose
Step 1	enable Example: Router> enable	Enables privileged EXEC mode. •Enter your password if prompted.
Step 2	debug aaa accounting Example: Router# debug aaa accounting	Displays information about accountable events as they occur.
Step 3	debug aaa authentication Example: Router# debug aaa authentication	Displays information about AAA authentication.
Step 4	debug aaa authorization Example: Router# debug aaa authorization	Displays information about AAA and TACACS+ authorization.
Step 5	debug isdn event Example: Router# debug isdn event	Displays ISDN events occurring on the user side (on the router) of the ISDN interface.
Step 6	debug modem csm [slot/port \| group group-number] Example: Router# debug modem csm 1/0 group 1	Displays call switching module (CSM) modem call information.
Step 7	debug ppp {negotiation \| authentication} Example: Router# debug ppp authentication	Displays information on traffic and exchanges in an internetwork that is implementing the PPP.
Step 8	debug radius Example: Router# debug radius	Displays information associated with RADIUS.

Examples

The following sample debug outputs display information about a V.92 reporting situation:

Debug Output 1

01:39:19: ISDN Se7/6:23: RX <-  SETUP pd = 8  callref = 0x42A0

01:39:19:         Bearer Capability i = 0x9090A2

01:39:19:         Channel ID i = 0xA18396

01:39:19:         Progress Ind i = 0x8183 - Origination address is non-ISDN

01:39:19:         Calling Party Number i = 0xA1, '60112', Plan:ISDN, Type:National

01:39:19:         Called Party Number i = 0xA1, '50138', Plan:ISDN, Type:National

01:39:19:         Locking Shift to Codeset 6

01:39:19:         Codeset 6 IE 0x28  i = 'ANALOG,savitha'

01:39:19: ISDN Se7/6:23: Incoming call id = 0x0038, dsl 0

01:39:19: ISDN Se7/6:23: NegotiateBchan: bchan 22 intid 0 serv_st 0 chan_st 0 callid 
0x0000 ev 0x90 n/w? 0

01:39:19: Negotiated int_id 0 bchan 0 cr=0xC2A0 callid=0x0038 lo_chan 22 final 
int_id/bchan 0/22 cause 0x0

01:39:19: ISDN Se7/6:23: LIF_EVENT: ces/callid 1/0x38 CALL_INCOMING

01:39:19: ISDN Se7/6:23: CALL_INCOMING dsl 0 bchan 21

01:39:19: voice_parse_intf_name: Using the old NAS_PORT string

01:39:19: AAA/ACCT/EVENT/(00000007): CALL START

01:39:19: AAA/ACCT(00000000): add node, session 9

01:39:19: AAA/ACCT/NET(00000007): add, count 1

01:39:19: AAA/ACCT/EVENT/(00000007): ATTR REPLACE

01:39:19: ISDN Se7/6:23: CALL_INCOMING: call type is VOICE ULAW, bchan = 21

01:39:19: ISDN Se7/6:23: Event:  Received a VOICE call from 60112 on B21 at 64 Kb/s Tone 
Value 0

01:39:19: AAA/ACCT/DS0: channel=21, ds1=6, t3=0, slot=7, ds0=117465109

01:39:19: AAA/ACCT/DS0: channel=21, ds1=6, t3=0, slot=7, ds0=117465109

01:39:19: VDEV_ALLOCATE: 1/5 is allocated

01:39:19: ISDN Se7/6:23: RM returned call_type 1 resource type 0 response 2

01:39:19: EVENT_FROM_ISDN: dchan_idb=0x63B3D334, call_id=0x38, ces=0x0

   bchan=0x15, event=0x1, cause=0x0

01:39:19:  dev in call to isdn : set dnis_collected & fap_notify

01:39:19: EVENT_FROM_ISDN:(0038): DEV_INCALL at slot 1 and port 5

01:39:19: EVENT_FROM_ISDN: decode:calling oct3 0xA1, called oct3 0xA1, oct3a 0x0,mask 0x3D

01:39:19: EVENT_FROM_ISDN: csm_call_info:calling oct3 0xA1, called oct3 0xA1, oct3a 
0x0,mask 0x3D

01:39:19: CSM_PROC_IDLE: CSM_EVENT_ISDN_CALL at slot 1, port 5

01:39:19: CSM DSPLIB(1/5/csm_flags=0x12): np_dsplib_prepare_modem

01:39:19: csm_connect_pri_vdev: TS allocated at bp_stream 0, bp_Ch 5, vdev_common 
0x62EAD8F4 1/5

01:39:19: ISDN Se7/6:23: EVENT to CSM:DEV_INCALL: calltype=VOICE, bchan=21

01:39:19: ISDN Se7/6:23: TX ->  CALL_PROC pd = 8  callref = 0xC2A0

01:39:19:         Channel ID i = 0xA98396

01:39:19: ISDN Se7/6:23: TX ->  ALERTING pd = 8  callref = 0xC2A0

01:39:19: CSM DSPLIB(1/5):DSPLIB_MODEM_INIT: Modem session transition to IDLE

01:39:19: CSM DSPLIB(1/5): Modem went offhook

01:39:19: CSM_PROC_IC2_RING: CSM_EVENT_MODEM_OFFHOOK at slot 1, port 5

01:39:19: ISDN Se7/6:23: VOICE_ANS Event:  call id 0x38, bchan 21, ces 0

01:39:19: ISDN Se7/6:23: isdn_send_connect(): msg 74, call id 0x38, ces 0 bchan 21, call 
type VOICE

01:39:19: ISDN Se7/6:23: TX ->  CONNECT pd = 8  callref = 0xC2A0

01:39:19: ISDN Se7/6:23: RX <-  CONNECT_ACK pd = 8  callref = 0x42A0

01:39:19: ISDN Se7/6:23: LIF_EVENT: ces/callid 1/0x38 CALL_PROGRESS

01:39:19: ISDN Se7/6:23: event CALL_PROGRESS dsl 0

01:39:19: ISDN Se7/6:23: CALL_PROGRESS: CALL_CONNECTED call id 0x38, bchan 21, dsl 0

01:39:19: EVENT_FROM_ISDN: dchan_idb=0x63B3D334, call_id=0x38, ces=0x0

   bchan=0x15, event=0x4, cause=0x0

01:39:19: EVENT_FROM_ISDN:(0038): DEV_CONNECTED at slot 1 and port 5

01:39:19: CSM_PROC_IC6_WAIT_FOR_CONNECT: CSM_EVENT_ISDN_CONNECTED at slot 1, port 5

01:39:19: CSM DSPLIB(1/5): np_dsplib_call_accept

01:39:19: ISDN Se7/6:23: EVENT to CSM:DEV_CONNECTED: calltype=VOICE, bchan=21

01:39:19: CSM DSPLIB(1/5):DSPLIB_MODEM_WAIT_ACTIVE: Modem session transition to ACTIVE

01:39:19: CSM DSPLIB(1/5): Modem state changed to (CONNECT_STATE)

01:39:22: CSM DSPLIB(1/5): Modem state changed to (V8BIS_EXCHANGE_STATE)

01:39:24: CSM DSPLIB(1/5): Modem state changed to (LINK_STATE)

01:39:28: CSM DSPLIB(1/5): Modem state changed to (RANGING_STATE)

01:39:30: CSM DSPLIB(1/5): Modem state changed to (HALF_DUPLEX_TRAIN_STATE)

01:39:45: CSM DSPLIB(1/5): Modem state changed to (TRAINUP_STATE)

01:39:45: CSM DSPLIB(1/5): Modem state changed to (EC_NEGOTIATING_STATE)

01:39:46: CSM DSPLIB(1/5): Modem state changed to (STEADY_STATE)

01:39:46: TTY1/05: DSR came up

01:39:46: tty1/05: Modem: IDLE->(unknown)

01:39:46: TTY1/05: EXEC creation

01:39:46: CHAT1/05: Attempting line activation script

01:39:46: CHAT1/05: Asserting DTR

01:39:50: voice_parse_intf_name: Using the old NAS_PORT string

01:39:50: voice_parse_intf_name: Using the old NAS_PORT string

01:39:50: AAA/AUTHEN/LOGIN (00000007): Pick method list 'default'

01:39:50: RADIUS/ENCODE(00000007): ask "Username: "

01:39:50: RADIUS/ENCODE(00000007): send packet; GET_USER

01:39:50: TTY1/05: set timer type 10, 30 seconds

01:39:50: TTY1/05: Autoselect(2) sample 7E

01:39:50: TTY1/05: Autoselect(2) sample 7EFF

01:39:50: TTY1/05: Autoselect(2) sample 7EFF7D

01:39:50: TTY1/05: Autoselect(2) sample 7EFF7D23

01:39:50: TTY1/05 Autoselect cmd:  ppp negotiate

01:39:50: TTY1/05: EXEC creation

01:39:50: CHAT1/05: Attempting line activation script

01:39:50: CHAT1/05: Asserting DTR

01:39:54: voice_parse_intf_name: Using the old NAS_PORT string

01:39:54: voice_parse_intf_name: Using the old NAS_PORT string

01:39:54: TTY1/05: no timer type 1 to destroy

01:39:54: TTY1/05: no timer type 0 to destroy

01:39:54: As1/05 LCP: I CONFREQ [Closed] id 0 len 50

01:39:54: As1/05 LCP:    ACCM 0x00000000 (0x020600000000)

01:39:54: As1/05 LCP:    MagicNumber 0x00002EB8 (0x050600002EB8)

01:39:54: As1/05 LCP:    PFC (0x0702)

01:39:54: As1/05 LCP:    ACFC (0x0802)

01:39:54: As1/05 LCP:    Callback 6  (0x0D0306)

01:39:54: As1/05 LCP:    MRRU 1614 (0x1104064E)

01:39:54: As1/05 LCP:    EndpointDisc 1 Local

01:39:54: As1/05 LCP:     (0x131701CC7F60A0E7A211D6B549000102)

01:39:54: As1/05 LCP:     (0x2BC43900000000)

01:39:54: As1/05 LCP: Lower layer not up, Fast Starting

01:39:54: voice_parse_intf_name: Using the old NAS_PORT string

01:39:54: voice_parse_intf_name: Using the old NAS_PORT string

01:39:54: As1/05 PPP: Treating connection as a callin

01:39:54: As1/05 PPP: Phase is ESTABLISHING, Passive Open

01:39:54: As1/05 LCP: State is Listen

01:39:54: As1/05 PPP: Authorization required

01:39:54: As1/05 LCP: O CONFREQ [Listen] id 1 len 25

01:39:54: As1/05 LCP:    ACCM 0x000A0000 (0x0206000A0000)

01:39:54: As1/05 LCP:    AuthProto CHAP (0x0305C22305)

01:39:54: As1/05 LCP:    MagicNumber 0x099EBCBA (0x0506099EBCBA)

01:39:54: As1/05 LCP:    PFC (0x0702)

01:39:54: As1/05 LCP:    ACFC (0x0802)

01:39:54: As1/05 LCP: O CONFREJ [Listen] id 0 len 11

01:39:54: As1/05 LCP:    Callback 6  (0x0D0306)

01:39:54: As1/05 LCP:    MRRU 1614 (0x1104064E)

01:39:54: As1/05 LCP: I CONFACK [REQsent] id 1 len 25

01:39:54: As1/05 LCP:    ACCM 0x000A0000 (0x0206000A0000)

01:39:54: As1/05 LCP:    AuthProto CHAP (0x0305C22305)

01:39:54: As1/05 LCP:    MagicNumber 0x099EBCBA (0x0506099EBCBA)

01:39:54: As1/05 LCP:    PFC (0x0702)

01:39:54: As1/05 LCP:    ACFC (0x0802)

01:39:54: As1/05 LCP: I CONFREQ [ACKrcvd] id 1 len 43

01:39:54: As1/05 LCP:    ACCM 0x00000000 (0x020600000000)

01:39:54: As1/05 LCP:    MagicNumber 0x00002EB8 (0x050600002EB8)

01:39:54: As1/05 LCP:    PFC (0x0702)

01:39:54: As1/05 LCP:    ACFC (0x0802)

01:39:54: As1/05 LCP:    EndpointDisc 1 Local

01:39:54: As1/05 LCP:     (0x131701CC7F60A0E7A211D6B549000102)

01:39:54: As1/05 LCP:     (0x2BC43900000000)

01:39:54: As1/05 LCP: O CONFACK [ACKrcvd] id 1 len 43

01:39:54: As1/05 LCP:    ACCM 0x00000000 (0x020600000000)

01:39:54: As1/05 LCP:    MagicNumber 0x00002EB8 (0x050600002EB8)

01:39:54: As1/05 LCP:    PFC (0x0702)

01:39:54: As1/05 LCP:    ACFC (0x0802)

01:39:54: As1/05 LCP:    EndpointDisc 1 Local

01:39:54: As1/05 LCP:     (0x131701CC7F60A0E7A211D6B549000102)

01:39:54: As1/05 LCP:     (0x2BC43900000000)

01:39:54: As1/05 LCP: State is Open

01:39:54: As1/05 PPP: Phase is AUTHENTICATING, by this end

01:39:54: As1/05 CHAP: O CHALLENGE id 1 len 26 from "s5400"

01:39:54: As1/05 LCP: I IDENTIFY [Open] id 2 len 18 magic 0x00002EB8 MSRASV4.00

01:39:54: As1/05 LCP: I IDENTIFY [Open] id 3 len 23 magic 0x00002EB8 MSRAS-1-PTE-PC1

01:39:54: As1/05 CHAP: I RESPONSE id 1 len 34 from "Administrator"

01:39:54: As1/05 PPP: Phase is FORWARDING, Attempting Forward

01:39:54: As1/05 PPP: Phase is AUTHENTICATING, Unauthenticated User

01:39:54: AAA/AUTHEN/PPP (00000007): Pick method list 'default'

01:39:54: As1/05 PPP: Sent CHAP LOGIN Request

01:39:54: RADIUS/ENCODE(00000007): Unsupported AAA attribute parent-interface

01:39:54: RADIUS/ENCODE(00000007): Unsupported AAA attribute parent-interface-type

01:39:54: RADIUS/ENCODE(00000007): acct_session_id: 9

01:39:54: RADIUS(00000007): sending

01:39:54: RADIUS: Send to unknown id 2 10.107.164.120:1645, Access-Request, len 128

01:39:54: RADIUS:  authenticator 13 E4 F2 9F BC 3E CE 52 - CC 93 0C E0 01 0C 73 7B

01:39:54: RADIUS:  Framed-Protocol     [7]   6   PPP                       [1]

01:39:54: RADIUS:  User-Name           [1]   15  "Administrator"

01:39:54: RADIUS:  CHAP-Password       [3]   19  *

01:39:54: RADIUS:  Called-Station-Id   [30]  7   "50138"

01:39:54: RADIUS:  Calling-Station-Id  [31]  7   "60112"

01:39:54: RADIUS:  Vendor, Cisco       [26]  30

01:39:54: RADIUS:   cisco-nas-port     [2]   24  "Async1/05*Serial7/6:21"

01:39:54: RADIUS:  NAS-Port            [5]   6   221

01:39:54: RADIUS:  NAS-Port-Type       [61]  6   Async                     [0]

01:39:54: RADIUS:  Service-Type        [6]   6   Framed                    [2]

01:39:54: RADIUS:  NAS-IP-Address      [4]   6   10.0.58.107

01:39:54: RADIUS: Received from id 2 10.107.164.120:1645, Access-Accept, len 62

01:39:54: RADIUS:  authenticator EF 45 A3 D4 A7 EE D0 65 - 03 50 B4 3E 07 87 2E 2F

01:39:54: RADIUS:  Vendor, Cisco       [26]  30

01:39:54: RADIUS:   cisco-nas-port     [2]   24  "Async1/05*Serial7/6:21"

01:39:54: RADIUS:  Service-Type        [6]   6   Framed                    [2]

01:39:54: RADIUS:  Framed-Protocol     [7]   6   PPP                       [1]

01:39:54: RADIUS: Received from id 7

01:39:54: As1/05 PPP: Received LOGIN Response PASS

01:39:54: As1/05 PPP/AAA: Check Attr: interface

01:39:54: As1/05 PPP/AAA: Check Attr: service-type

01:39:54: As1/05 PPP/AAA: Check Attr: Framed-Protocol

01:39:54: As1/05 PPP: Phase is FORWARDING, Attempting Forward

01:39:54: As1/05 PPP: Phase is AUTHENTICATING, Authenticated User

01:39:54: As1/05 AAA/AUTHOR/LCP: Process Author

01:39:54: As1/05 AAA/AUTHOR/LCP: Process Attr: service-type

01:39:54: As1/05 CHAP: O SUCCESS id 1 len 4

01:39:54: AAA/ACCT/NET(00000007): Pick method list 'default'

01:39:54: AAA/ACCT/SETMLIST(00000007): Handle FFFFFFFF, mlist 630B11E4, Name default

01:39:54: AAA/ACCT/EVENT/(00000007): NET UP

01:39:54: AAA/ACCT/NET(00000007): Queueing record is START

01:39:54: As1/05 PPP: Phase is UP

01:39:54: As1/05 AAA/AUTHOR/IPCP: FSM authorization not needed

01:39:54: As1/05 AAA/AUTHOR/FSM: We can start IPCP

01:39:54: As1/05 IPCP: O CONFREQ [Closed] id 1 len 10

01:39:54: As1/05 IPCP:    Address 10.1.1.2 (0x030646010102)

01:39:54: AAA/ACCT(00000007): Accouting method=radius (radius)

01:39:54: RADIUS/ENCODE(00000007): Unsupported AAA attribute timezone

01:39:54: RADIUS/ENCODE(00000007): Unsupported AAA attribute parent-interface

01:39:54: RADIUS/ENCODE(00000007): Unsupported AAA attribute parent-interface-type

01:39:54: RADIUS(00000007): sending

01:39:54: RADIUS: Send to unknown id 8 10.107.164.120:1646, Accounting-Request, len 243

01:39:54: RADIUS:  authenticator 41 87 FA 03 EB F9 94 62 - B2 3A 24 B8 27 4C A4 BC

01:39:54: RADIUS:  Acct-Session-Id     [44]  10  "00000009"

01:39:54: RADIUS:  Framed-Protocol     [7]   6   PPP                       [1]

01:39:54: RADIUS:  Connect-Info        [77]  26  "52000/28800 V90/V44/LAPM"

01:39:54: RADIUS:  Vendor, Cisco       [26]  48

01:39:54: RADIUS:   Cisco AVpair       [1]   42  "v92-info=V.92 QC MOH/No QC 
Requested/0/0"

01:39:54: RADIUS:  Vendor, Cisco       [26]  32

01:39:54: RADIUS:   Cisco AVpair       [1]   26  "connect-progress=Call Up"

01:39:54: RADIUS:  Authentic           [45]  6   RADIUS                    [1]

01:39:54: RADIUS:  User-Name           [1]   15  "Administrator"

01:39:54: RADIUS:  Acct-Status-Type    [40]  6   Start                     [1]

01:39:54: RADIUS:  Called-Station-Id   [30]  7   "50138"

01:39:54: RADIUS:  Calling-Station-Id  [31]  7   "60112"

01:39:54: RADIUS:  Vendor, Cisco       [26]  30

01:39:54: RADIUS:   cisco-nas-port     [2]   24  "Async1/05*Serial7/6:21"

01:39:54: RADIUS:  NAS-Port            [5]   6   221

01:39:54: RADIUS:  NAS-Port-Type       [61]  6   Async                     [0]

01:39:54: RADIUS:  Service-Type        [6]   6   Framed                    [2]

01:39:54: RADIUS:  NAS-IP-Address      [4]   6   10.0.58.107

01:39:54: RADIUS:  Acct-Delay-Time     [41]  6   0

01:39:54: RADIUS: Received from id 8 10.107.164.120:1646, Accounting-response, len 20

01:39:54: RADIUS:  authenticator E5 5C D3 69 88 D5 2E 8E - 49 AF 63 22 01 53 33 7B

01:39:54: AAA/ACCT/NET(00000007): START protocol reply PASS

01:39:54: As1/05 CCP: I CONFREQ [Not negotiated] id 4 len 211

01:39:54: As1/05 CCP:    Type254

01:39:54: As1/05 CCP:     (0xFEC90100000000000000000000000000)

01:39:54: As1/05 CCP:     (0x000074FFC7000000000068000000A000)

01:39:54: As1/05 CCP:     (0x00006C20563905000000C0000000A400)

01:39:54: As1/05 CCP:     (0x0000BC000000186400007000E80018C8)

01:39:54: As1/05 CCP:     (0x130017CCF1770000000001000000E8FE)

01:39:54: As1/05 CCP:     (0xC70076CDF17706000000000000000000)

01:39:54: As1/05 CCP:     (0x00000000000000000000000000000000)

01:39:54: As1/05 CCP:     (0x00000000000000000000000000000000)

01:39:54: As1/05 CCP:     (0x00000000000000000000000000000000)

01:39:54: As1/05 CCP:     (0x00000000000000000000220020000001)

01:39:54: As1/05 CCP:     (0x0800000000005016B1CBA2E7D611B549)

01:39:54: As1/05 CCP:     (0x0001022BC439C800000000000000C800)

01:39:54: As1/05 CCP:     (0x00004D000000281FB8)

01:39:54: As1/05 CCP:    MS-PPC supported bits 0x00000006 (0x120600000006)

01:39:54: As1/05 LCP: O PROTREJ [Open] id 2 len 217 protocol CCP

01:39:54: As1/05 LCP:  (0x80FD010400D3FEC90100000000000000)

01:39:54: As1/05 LCP:  (0x000000000000000074FFC70000000000)

01:39:54: As1/05 LCP:  (0x68000000A00000006C20563905000000)

01:39:54: As1/05 LCP:  (0xC0000000A4000000BC00000018640000)

01:39:54: As1/05 LCP:  (0x7000E80018C8130017CCF17700000000)

01:39:54: As1/05 LCP:  (0x01000000E8FEC70076CDF17706000000)

01:39:54: As1/05 LCP:  (0x00000000000000000000000000000000)

01:39:54: As1/05 LCP:  (0x00000000000000000000000000000000)

01:39:54: As1/05 LCP:  (0x00000000000000000000000000000000)

01:39:54: As1/05 LCP:  (0x00000000000000000000000000000000)

01:39:54: As1/05 LCP:  (0x2200200000010800000000005016B1CB)

01:39:54: As1/05 LCP:  (0xA2E7D611B5490001022BC439C8000000)

01:39:54: As1/05 LCP:  (0x00000000C80000004D000000281FB812)

01:39:54: As1/05 LCP:  (0x0600000006)

01:39:54: As1/05 IPCP: I CONFREQ [REQsent] id 5 len 34

01:39:54: As1/05 IPCP:    Address 0.0.0.0 (0x030600000000)

01:39:54: As1/05 IPCP:    PrimaryDNS 0.0.0.0 (0x810600000000)

01:39:54: As1/05 IPCP:    PrimaryWINS 0.0.0.0 (0x820600000000)

01:39:54: As1/05 IPCP:    SecondaryDNS 0.0.0.0 (0x830600000000)

01:39:54: As1/05 IPCP:    SecondaryWINS 0.0.0.0 (0x840600000000)

01:39:54: As1/05 AAA/AUTHOR/IPCP: Start.  Her address 0.0.0.0, we want 10.2.2.6

01:39:54: As1/05 AAA/AUTHOR/IPCP: Authorization succeeded

01:39:54: As1/05 AAA/AUTHOR/IPCP: Done.  Her address 0.0.0.0, we want 10.2.2.6

01:39:54: As1/05 AAA/AUTHOR/IPCP: no author-info for primary dns

01:39:54: As1/05 AAA/AUTHOR/IPCP: no author-info for primary wins

01:39:54: As1/05 AAA/AUTHOR/IPCP: no author-info for seconday dns

01:39:54: As1/05 AAA/AUTHOR/IPCP: no author-info for seconday wins

01:39:54: As1/05 IPCP: O CONFREJ [REQsent] id 5 len 28

01:39:54: As1/05 IPCP:    PrimaryDNS 0.0.0.0 (0x810600000000)

01:39:54: As1/05 IPCP:    PrimaryWINS 0.0.0.0 (0x820600000000)

01:39:54: As1/05 IPCP:    SecondaryDNS 0.0.0.0 (0x830600000000)

01:39:54: As1/05 IPCP:    SecondaryWINS 0.0.0.0 (0x840600000000)

01:39:54: As1/05 IPCP: I CONFACK [REQsent] id 1 len 10

01:39:54: As1/05 IPCP:    Address 70.1.1.2 (0x030646010102)

01:39:54: As1/05 IPCP: I CONFREQ [ACKrcvd] id 6 len 10

01:39:54: As1/05 IPCP:    Address 0.0.0.0 (0x030600000000)

01:39:54: As1/05 IPCP: O CONFNAK [ACKrcvd] id 6 len 10

01:39:54: As1/05 IPCP:    Address 70.2.2.6 (0x030646020206)

01:39:55: As1/05 IPCP: I CONFREQ [ACKrcvd] id 7 len 10

01:39:55: As1/05 IPCP:    Address 70.2.2.6 (0x030646020206)

01:39:55: As1/05 IPCP: O CONFACK [ACKrcvd] id 7 len 10

01:39:55: As1/05 IPCP:    Address 70.2.2.6 (0x030646020206)

01:39:55: As1/05 IPCP: State is Open

01:39:55: AAA/ACCT/EVENT/(00000007): IPCP_PASS

01:39:55: As1/05 IPCP: Install route to 10.2.2.6

01:39:55: As1/05 IPCP: Add link info for cef entry 10.2.2.6

Debug Output 2

01:40:50: ISDN Se7/6:23: RX <-  DISCONNECT pd = 8  callref = 0x42A0

01:40:50:         Cause i = 0x8190 - Normal call clearing

01:40:50: ISDN Se7/6:23: LIF_EVENT: ces/callid 1/0x38 CALL_DISC

01:40:50: EVENT_FROM_ISDN: dchan_idb=0x63B3D334, call_id=0x38, ces=0x0

   bchan=0x15, event=0x0, cause=0x10

01:40:50: EVENT_FROM_ISDN:(0038): DEV_IDLE at slot 1 and port 5

01:40:50: CSM_PROC_IC7_OC6_CONNECTED: CSM_EVENT_ISDN_DISCONNECTED at slot 1, port 5

01:40:50: CSM DSPLIB(1/5): np_dsplib_call_hangup reason 14

01:40:50: CSM(1/5): Enter csm_enter_disconnecting_state

01:40:50: VDEV_DEALLOCATE: slot 1 and port 5 is deallocated

01:40:50: ISDN Se7/6:23: EVENT to CSM:DEV_IDLE: calltype=VOICE, bchan=21

01:40:50: ISDN Se7/6:23: process_disc_ack(): call id 0x38, ces 0, call type VOICE cause 
0x10

01:40:50: ISDN Se7/6:23: TX ->  RELEASE pd = 8  callref = 0xC2A0

01:40:50: AAA/ACCT/EVENT/(00000007): CALL STOP

01:40:50: AAA/ACCT/CALL STOP(00000007): Sending stop requests

01:40:50: AAA/ACCT(00000007): Send all stops

01:40:50: AAA/ACCT/NET(00000007): STOP

01:40:50: AAA/ACCT/NET(00000007): Queueing record is STOP osr 1

01:40:50: AAA/ACCT(00000007): Accouting method=radius (radius)

01:40:50: RADIUS/ENCODE(00000007): Unsupported AAA attribute timezone

01:40:50: RADIUS/ENCODE(00000007): Unsupported AAA attribute parent-interface

01:40:50: RADIUS/ENCODE(00000007): Unsupported AAA attribute parent-interface-type

01:40:50: RADIUS(00000007): sending

01:40:50: RADIUS: Send to unknown id 9 10.107.164.120:1646, Accounting-Request, len 315

01:40:50: RADIUS:  authenticator 2E 6A 04 D0 04 9A D3 D5 - F7 DD 99 E0 C3 99 27 60

01:40:50: RADIUS:  Acct-Session-Id     [44]  10  "00000009"

01:40:50: RADIUS:  Framed-Protocol     [7]   6   PPP                       [1]

01:40:50: RADIUS:  Framed-IP-Address   [8]   6   70.2.2.6

01:40:50: RADIUS:  Acct-Terminate-Cause[49]  6   lost-carrier              [2]

01:40:50: RADIUS:  Vendor, Cisco       [26]  33

01:40:50: RADIUS:   Cisco AVpair       [1]   27  "disc-cause-ext=No Carrier"

01:40:50: RADIUS:  Vendor, Cisco       [26]  35

01:40:50: RADIUS:   Cisco AVpair       [1]   29  "connect-progress=LAN Ses Up"

01:40:50: RADIUS:  Acct-Session-Time   [46]  6   56

01:40:50: RADIUS:  Connect-Info        [77]  26  "52000/28800 V90/V44/LAPM"

01:40:50: RADIUS:  Vendor, Cisco       [26]  48

01:40:50: RADIUS:   Cisco AVpair       [1]   42  "v92-info=V.92 QC MOH/No QC 
Requested/0/0"

01:40:50: RADIUS:  Acct-Input-Octets   [42]  6   285

01:40:50: RADIUS:  Acct-Output-Octets  [43]  6   295

01:40:50: RADIUS:  Acct-Input-Packets  [47]  6   5

01:40:50: RADIUS:  Acct-Output-Packets [48]  6   5

01:40:50: RADIUS:  User-Name           [1]   15  "Administrator"

01:40:50: RADIUS:  Acct-Status-Type    [40]  6   Stop                      [2]

01:40:50: RADIUS:  Called-Station-Id   [30]  7   "50138"

01:40:50: RADIUS:  Calling-Station-Id  [31]  7   "60112"

01:40:50: RADIUS:  Vendor, Cisco       [26]  30

01:40:50: RADIUS:   cisco-nas-port     [2]   24  "Async1/05*Serial7/6:21"

01:40:50: RADIUS:  NAS-Port            [5]   6   221

01:40:50: RADIUS:  NAS-Port-Type       [61]  6   Async                     [0]

01:40:50: RADIUS:  Service-Type        [6]   6   Framed                    [2]

01:40:50: RADIUS:  NAS-IP-Address      [4]   6   10.0.58.107

01:40:50: RADIUS:  Acct-Delay-Time     [41]  6   0

01:40:50: RADIUS: Received from id 9 10.107.164.120:1646, Accounting-response, len 20

01:40:50: RADIUS:  authenticator D0 3F 32 D7 7C 8C 5E 22 - 9A 69 EF 17 AC 32 81 21

01:40:50: AAA/ACCT/NET(00000007): STOP protocol reply PASS

01:40:50: AAA/ACCT/NET(00000007): Cleaning up from Callback osr 0

01:40:50: AAA/ACCT(00000007): del node, session 9

01:40:50: AAA/ACCT/NET(00000007): free_rec, count 0

01:40:50: AAA/ACCT/NET(00000007) reccnt 0, csr TRUE, osr 0

01:40:50: AAA/ACCT/NET(00000007): Last rec in db, intf not enqueued

01:40:50: ISDN Se7/6:23: RX <-  RELEASE_COMP pd = 8  callref = 0x42A0

01:40:50: ISDN Se7/6:23: CCPRI_ReleaseCall(): bchan 22, call id 0x38, call type VOICE

01:40:50: CCPRI_ReleaseChan released b_dsl 0 B_Chan 22

01:40:50: ISDN Se7/6:23: LIF_EVENT: ces/callid 1/0x38 CALL_CLEARED

01:40:50: ISDN Se7/6:23: received CALL_CLEARED  call_id 0x38

01:40:50: no resend setup, no redial

01:40:50: no resend setup, no redial

01:40:50: AAA/ACCT/DS0: channel=21, ds1=6, t3=0, slot=7, ds0=117465109

01:40:50: EVENT_FROM_ISDN: dchan_idb=0x63B3D334, call_id=0x38, ces=0x1

   bchan=0x15, event=0x0, cause=0x0

01:40:50: ISDN Se7/6:23: EVENT to CSM:DEV_IDLE: calltype=VOICE, bchan=21

01:40:51: CSM DSPLIB(1/5): Modem state changed to (TERMINATING_STATE)

01:40:51: CSM DSPLIB(1/5): Modem went onhook

01:40:51: CSM_PROC_IC8_OC8_DISCONNECTING: CSM_EVENT_MODEM_ONHOOK at slot 1, port 5

01:40:51: CSM(1/5): Enter csm_enter_idle_state

01:40:51: CSM DSPLIB(1/5):DSPLIB_IDLE: Modem session transition to FLUSHING

01:40:51: CSM DSPLIB(1/5):DSPLIB_IDLE: Modem session transition to IDLE

01:40:51: TTY1/05: DSR was dropped

01:40:51: tty1/05: Modem: READY->(unknown)

01:40:52: TTY1/05: dropping DTR, hanging up

01:40:52: DSPLIB(1/5): np_dsplib_process_dtr_notify()

01:40:52: CSM DSPLIB(1/5): Modem went onhook

01:40:52: CSM_PROC_IDLE: CSM_EVENT_MODEM_ONHOOK at slot 1, port 5

01:40:52: TTY1/05: Async Int reset: Dropping DTR

01:40:52: tty1/05: Modem: HANGUP->(unknown)

01:40:52: AAA/ACCT/EVENT/(00000007): NET DOWN

01:40:52: As1/05 IPCP: Remove link info for cef entry 70.2.2.6

01:40:52: As1/05 IPCP: State is Closed

01:40:52: As1/05 PPP: Phase is TERMINATING

01:40:52: As1/05 LCP: State is Closed

01:40:52: As1/05 PPP: Phase is DOWN

01:40:52: As1/05 IPCP: Remove route to 70.2.2.6

01:40:52: As1/05 LCP: State is Closed

01:40:53: TTY1/05: cleanup pending. Delaying DTR

01:40:54: TTY1/05: cleanup pending. Delaying DTR

01:40:55: TTY1/05: cleanup pending. Delaying DTR

01:40:56: TTY1/05: cleanup pending. Delaying DTR

01:40:57: TTY1/05: no timer type 0 to destroy

01:40:57: TTY1/05: no timer type 1 to destroy

01:40:57: TTY1/05: no timer type 3 to destroy

01:40:57: TTY1/05: no timer type 4 to destroy

01:40:57: TTY1/05: no timer type 2 to destroy

01:40:57: Async1/05: allowing modem_process to continue hangup

01:40:57: TTY1/05: restoring DTR

01:40:57: TTY1/05: autoconfigure probe started

01:40:57: As1/05 LCP: State is Closed

Verifying V.92 Call Information

To verify that the V.92 call was correctly established, use the following show commands:

SUMMARY

•show modem [slot/port | group number]

•show port modem log [reverse slot/port] [slot | slot/port]

•show users [all]

DETAILED STEPS


	Command or Action	Purpose
Step 1	show modem [slot/port \| group number] Example: Router# show modem 1/0 group 1	Displays a high-level performance report for all the modems or a single modem inside Cisco access servers.
Step 2	show port modem log [reverse slot/port] [slot \| slot/port] Example: Router# show port modem log	Displays the events generated by the modem sessions.
Step 3	show users [all] Example: Router# show users	Displays information about the active lines on the router.

Examples

The following V.92 reporting outputs are from the show port modem log and show users commands:

Show Output 1

Router# show port modem log 1/05

Port 1/05 Events Log

  01:46:19: Service Type: DATA_FAX_MODEM

  01:46:19: Service Mode: DATA_FAX_MODEM

  01:46:19: Session State: IDLE

  01:46:19: incoming caller number: 60112

  01:46:19: incoming called number: 50138

  01:46:19: Service Type: DATA_FAX_MODEM

  01:46:19: Service Mode: DATA_FAX_MODEM

  01:46:19: Session State: IDLE

  01:46:19: Service Type: DATA_FAX_MODEM

  01:46:19: Service Mode: DATA_FAX_MODEM

  01:46:19: Session State: ACTIVE

  01:46:19: Modem State event:

            State: Connect

  01:46:20: Modem State event:

            State: V.8bis Exchange

  01:46:20: Modem State event:

            State: Link

  01:46:20: Modem State event:

            State: Ranging

  01:46:20: Modem State event:

            State: Half Duplex Train

  01:46:20: Modem State event:

            State: Train Up

  01:46:20: Modem State event:

            State: EC Negotiating

  01:46:20: Modem State event:

            State: Steady

  01:46:20: Modem Static event:

    Connect Protocol                        :   LAP-M

    Compression                             :   V.44

    Connected Standard                      :   V.90

    TX,RX Symbol Rate                       :   8000, 3200

    TX,RX Carrier Frequency                 :   0, 1829

    TX,RX Trellis Coding                    :   16/No trellis

    Frequency Offset                        :   0  Hz

    Round Trip Delay                        :   0  msecs

    TX,RX Bit Rate                          :   52000, 28800

    Robbed Bit Signalling (RBS) pattern     :   255

    Digital Pad                             :   6 dB

    Digital Pad Compensation                :   Enabled

    MNP10EC                                 :   Off-None

    QC Exchange                             :   No QC Requested

    TX,RX Negotiated String Length          :   255, 255

    DC TX,RX Negotiated Codewords           :   1024, 1024

    DC TX,RX Negotiated History Size        :   4096, 5120

01:46:21: ISDN Se7/6:23: RX <-  SERVICE pd = 3  callref = 0x0000

01:46:21:         Change Status i = 0xC0 - in-service

01:46:21:         Channel ID i = 0xA98381

01:46:21: ISDN Se7/6:23: Incoming call id = 0x003A, dsl 0

01:46:21: ISDN Se7/6:23: LIF_EVENT: ces/callid 1/0x0 CHAN_STATUS

01:46:21: ISDN Se7/6:23: CHAN_STATUS B-chan=1, action=2; Maintenance.

01:46:21: ISDN Se7/6:23: TX ->  SERVICE ACKNOWLEDGE pd = 3  callref = 0x8000

01:46:21:         Change Status i = 0xC0 - in-service

01:46:21:         Channel ID i =        1

s5400#sh port modem log 1/05

Port 1/05 Events Log

  01:46:30: Service Type: DATA_FAX_MODEM

  01:46:30: Service Mode: DATA_FAX_MODEM

  01:46:30: Session State: IDLE

  01:46:30: incoming caller number: 60112

  01:46:30: incoming called number: 50138

  01:46:30: Service Type: DATA_FAX_MODEM

  01:46:30: Service Mode: DATA_FAX_MODEM

  01:46:30: Session State: IDLE

  01:46:30: Service Type: DATA_FAX_MODEM

  01:46:30: Service Mode: DATA_FAX_MODEM

  01:46:30: Session State: ACTIVE

  01:46:30: Modem State event:

            State: Connect

  01:46:30: Modem State event:

            State: V.8bis Exchange

  01:46:30: Modem State event:

            State: Link

  01:46:30: Modem State event:

            State: Ranging

  01:46:30: Modem State event:

            State: Half Duplex Train

  01:46:30: Modem State event:

            State: Train Up

  01:46:31: Modem State event:

            State: EC Negotiating

  01:46:31: Modem State event:

            State: Steady

  01:46:31: Modem Static event:

    Connect Protocol                        :   LAP-M

    Compression                             :   V.44

    Connected Standard                      :   V.90

    TX,RX Symbol Rate                       :   8000, 3200

    TX,RX Carrier Frequency                 :   0, 1829

    TX,RX Trellis Coding                    :   16/No trellis

    Frequency Offset                        :   0  Hz

    Round Trip Delay                        :   0  msecs

    TX,RX Bit Rate                          :   52000, 28800

    Robbed Bit Signalling (RBS) pattern     :   255

    Digital Pad                             :   6 dB

    Digital Pad Compensation                :   Enabled

    MNP10EC                                 :   Off-None

    QC Exchange                             :   No QC Requested

    TX,RX Negotiated String Length          :   255, 255

    DC TX,RX Negotiated Codewords           :   1024, 1024

    DC TX,RX Negotiated History Size        :   4096, 5120

    Diagnostic Code                         :   00 00 00 00 00 00 00 00

    V.92 Status                             :   V.92 QC MOH

  01:46:32: Modem Dynamic event:

    Sq Value                                :   6

    Signal Noise Ratio                      :   38  dB

    Receive Level                           :   -11  dBm

    Phase Jitter Frequency                  :   0  Hz

    Phase Jitter Level                      :   0  degrees

    Far End Echo Level                      :   0  dBm

    Phase Roll                              :   0  degrees

    Total Retrains                          :   0

    EC Retransmission Count                 :   0

    Characters transmitted, received        :   0, 0

    Characters received BAD                 :   0

    PPP/SLIP packets transmitted, received  :   0, 0

    PPP/SLIP packets received (BAD/ABORTED) :   0

    EC packets transmitted, received OK     :   0, 0

    EC packets (Received BAD/ABORTED)       :   0

    Total Speedshifts                       :   0

    Total MOH Time                          :   0  secs

    Current MOH Time                        :   0  secs

    MOH Status                              :   Modem is Not on Hold

    MOH Count                               :   0

    MOH Request Count                       :   0

    Retrains due to Call Waiting            :   0

    DC Encoder,Decoder State                :   compressed/compressed

    DC TX,RX Compression Ratio              :   not calculated/not calculated

    DC TX,RX Dictionary Reset Count         :   0, 0

    Diagnostic Code                         :   00 00 00 00 00 00 00 00

  01:46:35: Modem State event:

            State: Terminate

  01:46:35: Service Type: DATA_FAX_MODEM

  01:46:35: Service Mode: DATA_FAX_MODEM

  01:46:35: Session State: FLUSHING

  01:46:35: Service Type: DATA_FAX_MODEM

  01:46:35: Service Mode: DATA_FAX_MODEM

  01:46:35: Session State: IDLE

  01:46:35: Modem End Connect event:

    Call Timer                              :   65  secs

    Disconnect Reason Info                  :   0x220

        Type (=0  ):  <unknown>

       Class (=2  ):  EC condition - locally detected

      Reason (=32 ):  received DISC frame -- normal LAPM termination

    Total Retrains                          :   0

    EC Retransmission Count                 :   0

    Characters transmitted, received        :   677, 817

    Characters received BAD                 :   0

    PPP/SLIP packets transmitted, received  :   10, 10

    PPP/SLIP packets received (BAD/ABORTED) :   0

    EC packets transmitted, received OK     :   10, 21

    EC packets (Received BAD/ABORTED)       :   0

    TX,RX Bit Rate                          :   52000, 28800

    Total Speedshifts                       :   0

    Total MOH Time                          :   0  secs

    Current MOH Time                        :   0  secs

    MOH Status                              :   Modem is Not on Hold

    MOH Count                               :   0

    MOH Request Count                       :   0

    Retrains due to Call Waiting            :   0

    DC Encoder,Decoder State                :   compressed/compressed

    DC TX,RX Compression Ratio              :   1.67:1/1.65:1

    DC TX,RX Dictionary Reset Count         :   0, 1

    Diagnostic Code                         :   00 00 00 00 00 00 00 00

  01:46:37:Modem Link Rate event:

Show Output 2

Router# show users

    Line       User       Host(s)              Idle       Location

*  0 con 0                idle                 00:00:00

  tty 1/05     Administra Async interface      00:00:29   PPP: 70.2.2.6

  Interface      User        Mode                     Idle     Peer Address

Troubleshooting Tips

If you see that V.92 call information is not being reported by AAA, ensure that the call is a V.92 call by using the show modem command or by looking at the modem logs by using the show modem log command.

Additional References

For additional information related to the V.92 Reporting Using RADIUS Attribute v.92-info feature, refer to the following references:

Standards


Standards	Title
No new or modified standards are supported by this feature, and support for existing standards has not been modified by this feature.	—

MIBs


MIBs	MIBs Link
No new or modified MIBs are supported by this feature, and support for existing MIBs has not been modified by this feature.	To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL: http://www.cisco.com/go/mibs

RFCs


RFCs	Title
No new or modified RFCs are supported by this feature, and support for existing RFCs has not been modified by this feature.	—

Technical Assistance


Description	Link
Technical Assistance Center (TAC) home page, containing 30,000 pages of searchable technical content, including links to products, technologies, solutions, technical tips, and tools. Registered Cisco.com users can log in from this page to access even more content.	http://www.cisco.com/public/support/tac/home.shtml

Command Reference

The following commands are introduced or modified in the feature or features documented in this module. For information about these commands, see the Cisco IOS Dial Technologies Command Reference at http://www.cisco.com/en/US/docs/ios/dial/command/reference/dia_book.html. For information about all Cisco IOS commands, go to the Command Lookup Tool at http://tools.cisco.com/Support/CLILookup or to the Cisco IOS Master Commands List.

Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1005R)

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

© 2001-2008 Cisco Systems, Inc. All rights reserved.

Table Of Contents

V.92 Reporting Using RADIUS Attribute v.92-info

Contents

Prerequisites for V.92 Reporting Using RADIUS
Attribute v.92-info

Restrictions for V.92 Reporting Using RADIUS Attribute v.92-info

Information About V.92 Reporting Using RADIUS Attribute v.92-info

V.92 Standard Overview

VSA v.92-info

How to Monitor and Verify V.92 Call Information

Monitoring V.92 Call Information

SUMMARY

DETAILED STEPS

Examples

Verifying V.92 Call Information

SUMMARY

DETAILED STEPS

Examples

Troubleshooting Tips

Additional References

Related Documents

Standards

MIBs

RFCs

Technical Assistance

Command Reference

Table Of Contents

V.92 Reporting Using RADIUS Attribute v.92-info

Contents

Prerequisites for V.92 Reporting Using RADIUSAttribute v.92-info

Restrictions for V.92 Reporting Using RADIUS Attribute v.92-info

Information About V.92 Reporting Using RADIUS Attribute v.92-info

V.92 Standard Overview

VSA v.92-info

How to Monitor and Verify V.92 Call Information

Monitoring V.92 Call Information

SUMMARY

DETAILED STEPS

Examples

Verifying V.92 Call Information

SUMMARY

DETAILED STEPS

Examples

Troubleshooting Tips

Additional References

Related Documents

Standards

MIBs

RFCs

Technical Assistance

Command Reference

Prerequisites for V.92 Reporting Using RADIUS
Attribute v.92-info