Router naar VPN-client, modus-Config, joch-kaart vooraf gedeelde sleutel met NAT configureren

Downloadopties

  • PDF     (187.7 KB)
    Met Adobe Reader op diverse apparaten bekijken
  • ePub     (97.6 KB)
    Bekijken in diverse apps op iPhone, iPad, Android, Sony Reader of Windows Phone
  • Mobi (Kindle)     (100.9 KB)
    Op Kindle-apparaat of via Kindle-app op meerdere apparaten bekijken
Bijgewerkt:21 november 2006
Document-id:14123

Inclusief taalgebruik

De documentatie van dit product is waar mogelijk geschreven met inclusief taalgebruik. Inclusief taalgebruik wordt in deze documentatie gedefinieerd als taal die geen discriminatie op basis van leeftijd, handicap, gender, etniciteit, seksuele oriëntatie, sociaaleconomische status of combinaties hiervan weerspiegelt. In deze documentatie kunnen uitzonderingen voorkomen vanwege bewoordingen die in de gebruikersinterfaces van de productsoftware zijn gecodeerd, die op het taalgebruik in de RFP-documentatie zijn gebaseerd of die worden gebruikt in een product van een externe partij waarnaar wordt verwezen. Lees meer over hoe Cisco gebruikmaakt van inclusief taalgebruik.

Over deze vertaling

Cisco heeft dit document vertaald via een combinatie van machine- en menselijke technologie om onze gebruikers wereldwijd ondersteuningscontent te bieden in hun eigen taal. Houd er rekening mee dat zelfs de beste machinevertaling niet net zo nauwkeurig is als die van een professionele vertaler. Cisco Systems, Inc. is niet aansprakelijk voor de nauwkeurigheid van deze vertalingen en raadt aan altijd het oorspronkelijke Engelstalige document (link) te raadplegen.

Inleiding

Deze voorbeeldconfiguratie illustreert een router die voor mode-configuratie is geconfigureerd (de gebruiker krijgt een IP-adres uit de pool), pre-gedeelde toetsen op de wild-kaart (alle PC klanten delen een algemene sleutel) en netwerkadresomzetting (NAT). In deze configuratie kan een externe gebruiker het netwerk binnengaan en een intern IP-adres hebben dat vanuit de pool wordt toegewezen. Voor gebruikers lijkt het erop dat ze zich in het netwerk bevinden. Omdat privé-adressering, dus NAT, in het geding is, moet de router worden verteld wat te vertalen en wat niet te vertalen.

Voorwaarden

Vereisten

Er zijn geen specifieke vereisten van toepassing op dit document.

Gebruikte componenten

De informatie in dit document is gebaseerd op de volgende software- en hardware-versies:

  • Cisco IOS® softwarerelease 12.0.7T of hoger

  • Hardware die deze softwareherziening ondersteunt

  • Cisco Secure VPN-client 1.0/10A of 1.1 (weergegeven als 2.0.7/E of 2.1.12, respectievelijk, ga naar Help > Info over controle)

De informatie in dit document is gebaseerd op de apparaten in een specifieke laboratoriumomgeving. Alle apparaten die in dit document worden beschreven, hadden een opgeschoonde (standaard)configuratie. Als uw netwerk live is, moet u de potentiële impact van elke opdracht begrijpen.

Conventies

Raadpleeg Cisco Technical Tips Conventions (Conventies voor technische tips van Cisco) voor meer informatie over documentconventies.

Configureren

Deze sectie bevat informatie over het configureren van de functies die in dit document worden beschreven.

N.B.: Als u aanvullende informatie wilt vinden over de opdrachten in dit document, gebruikt u het Opdrachtplanningprogramma (alleen geregistreerd klanten).

Netwerkdiagram

Dit document gebruikt de netwerkinstellingen die in dit diagram worden weergegeven.

25a.gif

Configuraties

Dit document gebruikt deze configuraties.

VPN-clientconfiguratie 
Network Security policy: 

1- Myconn 
        My Identity = ip address
                Connection security: Secure 
                Remote Party Identity and addressing 
                        ID Type: IP subnet 
                        10.2.2.0
                        Port all Protocol all 

                Connect using secure tunnel 
                        ID Type: IP address 
                        201.70.32.101 

        Authentication (Phase 1) 
        Proposal 1 
                Authentication method: pre-shared key 
                Encryp Alg: DES 
                Hash Alg: MD5 
                SA life: Unspecified
                Key Group: DH 1 

        Key exchange (Phase 2) 
        Proposal 1 
                Encapsulation ESP 
                Encrypt Alg: DES 
                Hash Alg: MD5 
                Encap: tunnel 
                SA life: Unspecified 
                no AH 

2- Other Connections 
            Connection security: Non-secure 
            Local Network Interface 
                Name: Any 
                IP Addr: Any 
                Port: All

Routerconfiguratie 
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router
!
enable secret 5 $1$v5OP$mPuiEQn8ULa8hVMYVOV1D.
enable password ww
!
ip subnet-zero
!
cns event-service server
!

!--- IKE configuration.

 crypto isakmp policy 1
hash md5
authentication pre-share
crypto isakmp key cisco123 address 0.0.0.0
crypto isakmp client configuration address-pool local ourpool
!

!--- IPSec configuration.

crypto ipsec transform-set trans1 esp-des esp-md5-hmac
!
crypto dynamic-map dynmap 10
set transform-set trans1
!
crypto map intmap client configuration address initiate
crypto map intmap client configuration address respond
crypto map intmap 10 ipsec-isakmp dynamic dynmap
 !
 interface Ethernet0
ip address 201.70.32.101 255.255.255.0
 no ip directed-broadcast
ip nat outside
no ip route-cache
no ip mroute-cache
 crypto map intmap
 !
interface Serial1
ip address 10.2.2.1 255.255.255.0
no ip directed-broadcast
ip nat inside
!
 ip local pool ourpool 10.2.1.1 10.2.1.254
ip nat pool outsidepool 201.70.32.150 201.70.32.160 netmask 255.255.255.0

!--- Except the private network to private network traffic !--- from the NAT process.

ip nat inside source route-map nonat pool outsidepool
 ip classless
ip route 0.0.0.0 0.0.0.0 201.70.32.1
no ip http server

!--- Except the private network to private network traffic !--- from the NAT process.

access-list 101 deny ip 10.2.2.0 0.0.0.255 10.2.1.0 0.0.0.255
access-list 101 permit ip 10.2.2.0 0.0.0.255 any
route-map nonat permit 10
match ip address 101
 !
line con 0
transport input none
line aux 0
line vty 0 4
password ww
login
!
end

Verifiëren

Deze sectie verschaft informatie die u kunt gebruiken om te bevestigen dat uw configuratie correct werkt.

Bepaalde opdrachten met show worden ondersteund door de tool Output Interpreter (alleen voor geregistreerde klanten). Hiermee kunt u een analyse van de output van opdrachten met show genereren.

  • Laat actieve crypto motorverbindingen zien - toont de gecodeerde en gedecrypteerde pakketten.

  • toon crypto ipsec sa-shows the fase 2 security associaties.

  • toon crypto isakmp sa - toont de fase 1 veiligheidsassociaties.

Problemen oplossen

Deze sectie bevat informatie waarmee u problemen met de configuratie kunt oplossen.

Opdrachten voor troubleshooting

Opmerking: Voordat u debug-opdrachten afgeeft, raadpleegt u Belangrijke informatie over Debug Commands.

Deze apparaten moeten op beide IPSec routers (peers) worden uitgevoerd. Schoonmaken van veiligheidsverenigingen moet op beide partijen gebeuren.

  • debug crypto ipsec-displays de IPSec-onderhandelingen van fase 2.

  • debug crypto isakmp — Hiermee geeft u de ISAKMP-onderhandelingen van fase 1 weer.

  • debug van crypto motor-displays het verkeer dat versleuteld wordt.

  • duidelijke crypto isakmp — ontslaat de veiligheidsassociaties met betrekking tot fase 1.

  • duidelijke crypto sa — ontruimt de veiligheidsassociaties met betrekking tot fase 2.

Voorbeeld van output van foutopsporing

Routerdebugs 
Apr 18 15:17:59: ISAKMP (4): received packet from 
    201.70.32.82 (R) MM_NO_STATE
Apr 18 15:17:59: ISAKMP (4): received packet from 
    201.70.32.82 (R) MM_NO_STATE
Apr 18 15:18:03: ISAKMP (0): received packet from 
    201.70.32.82 (N) NEW SA
Apr 18 15:18:03: ISAKMP (0:5): processing SA payload. 
    message ID = 0
Apr 18 15:18:03: ISAKMP (0:5): Checking ISAKMP transform 1 
    against priority 1 policy
Apr 18 15:18:03: ISAKMP:      encryption DES-CBC
Apr 18 15:18:03: ISAKMP:      hash MD5
Apr 18 15:18:03: ISAKMP:      default group 1
Apr 18 15:18:03: ISAKMP:      auth pre-share
Apr 18 15:18:03: ISAKMP (0:5): atts are acceptable. 
    Next payload is 0
Apr 18 15:18:03: CryptoEngine0: generate alg parameter
Apr 18 15:18:05: CRYPTO_ENGINE: Dh phase 1 status: 0
Apr 18 15:18:05: CRYPTO_ENGINE: Dh phase 1 status: 0
Apr 18 15:18:05: ISAKMP (0:5): SA is doing pre-shared 
    key authentication
Apr 18 15:18:05: ISAKMP (5): SA is doing pre-shared 
    key authentication using id type ID_IPV4_ADDR
Apr 18 15:18:05: ISAKMP (5): sending packet to 
    201.70.32.82 (R) MM_SA_SETUP
Apr 18 15:18:05: ISAKMP (5): received packet from 
    201.70.32.82 (R) MM_SA_SETUP
Apr 18 15:18:05: ISAKMP (0:5): processing KE payload. 
    message ID = 0
Apr 18 15:18:05: CryptoEngine0: generate alg parameter
Apr 18 15:18:05: CRYPTO_ENGINE: Dh phase 1 status: 0
Apr 18 15:18:05: CRYPTO_ENGINE: Dh phase 1 status: 0
Apr 18 15:18:05: ISAKMP (0:5): SA is doing pre-shared 
    key authentication
Apr 18 15:18:05: ISAKMP (5): SA is doing pre-shared 
    key authentication using id
type ID_IPV4_ADDR
Apr 18 15:18:05: ISAKMP (5): sending packet to 
    201.70.32.82 (R) MM_SA_SETUP
Apr 18 15:18:05: ISAKMP (5): received packet from 
    201.70.32.82 (R) MM_SA_SETUP
Apr 18 15:18:05: ISAKMP (0:5): processing KE payload. 
    message ID = 0
Apr 18 15:18:05: CryptoEngine0: generate alg parameter
Apr 18 15:18:07: ISAKMP (0:5): processing NONCE payload. 
    message ID = 0
Apr 18 15:18:07: CryptoEngine0: create ISAKMP SKEYID for 
    conn id 5
Apr 18 15:18:07: ISAKMP (0:5): SKEYID state generated
Apr 18 15:18:07: ISAKMP (0:5): processing vendor id payload
Apr 18 15:18:07: ISAKMP (0:5): processing vendor id payload
Apr 18 15:18:07: ISAKMP (5): sending packet to 201.70.32.82 
    (R) MM_KEY_EXCH
Apr 18 15:18:07: ISAKMP (0:4): purging SA.
Apr 18 15:18:07: ISAKMP (0:4): purging node -1412157317
Apr 18 15:18:07: ISAKMP (0:4): purging node 1875403554
Apr 18 15:18:07: CryptoEngine0: delete connection 4
Apr 18 15:18:08: ISAKMP (5): received packet from 
    201.70.32.82 (R) MM_KEY_EXCH
Apr 18 15:18:08: ISAKMP (0:5): processing ID payload. 
    message ID = 0
Apr 18 15:18:08: ISAKMP (0:5): processing HASH payload. 
    message ID = 0
Apr 18 15:18:08: CryptoEngine0: generate hmac context 
    for conn id 5
Apr 18 15:18:08: ISAKMP (5): processing NOTIFY payload 
    24578 protocol 1 spi 0, message ID = 0
Apr 18 15:18:08: ISAKMP (0:5): SA has been authenticated 
    with 201.70.32.82
Apr 18 15:18:08: ISAKMP (5): ID payload
        next-payload : 8
        type         : 1
        protocol     : 17
        port         : 500
        length       : 8
Apr 18 15:18:08: ISAKMP (5): Total payload length: 12
Apr 18 15:18:08: CryptoEngine0: generate hmac context 
    for conn id 5
Apr 18 15:18:08: CryptoEngine0: clear dh number 
    for conn id 1
Apr 18 15:18:08: ISAKMP (5): sending packet to 
    201.70.32.82 (R) QM_IDLE
Apr 18 15:18:08: ISAKMP (5): received packet from 
    201.70.32.82 (R) QM_IDLE
Apr 18 15:18:08: ISAKMP (0:5): Locking struct 14D0DC 
    on allocation
Apr 18 15:18:08: ISAKMP (0:5): allocating address 
    10.2.1.1
Apr 18 15:18:08: CryptoEngine0: generate hmac context 
    for conn id 5
Apr 18 15:18:08: ISAKMP (0:5): initiating peer config to 
    201.70.32.82. message ID = 1226793520
Apr 18 15:18:08: ISAKMP (5): sending packet to 201.70.32.82 
    (R) QM_IDLE
Apr 18 15:18:09: ISAKMP (5): received packet from 201.70.32.82 
    (R) QM_IDLE
Apr 18 15:18:09: ISAKMP (0:5): processing transaction payload 
    from 201.70.32.82. message ID = 1226793520
Apr 18 15:18:09: ISAKMP: recieved config from 201.70.32.82   .
Apr 18 15:18:09: CryptoEngine0: generate hmac context 
    for conn id 5
Apr 18 15:18:09: ISAKMP:     Config payload type: 4
Apr 18 15:18:09: ISAKMP (0:5): peer accepted the address!
Apr 18 15:18:09: ISAKMP (0:5): adding static route for 10.2.1.1
Apr 18 15:18:09: ISAKMP (0:5): deleting node 1226793520
Apr 18 15:18:09: CryptoEngine0: generate hmac context for 
    conn id 5
Apr 18 15:18:09: ISAKMP (0:5): processing SA payload. 
    message ID = -617682048
Apr 18 15:18:09: ISAKMP (0:5): Checking IPSec proposal 1
Apr 18 15:18:09: ISAKMP: transform 1, ESP_DES
Apr 18 15:18:09: ISAKMP:   attributes in transform:
Apr 18 15:18:09: ISAKMP:      authenticator is HMAC-MD5
Apr 18 15:18:09: ISAKMP:      encaps is 1
Apr 18 15:18:09: validate proposal 0
Apr 18 15:18:09: ISAKMP (0:5): atts are acceptable.
Apr 18 15:18:09: IPSEC(validate_proposal_request): 
    proposal part #1, (key eng. msg.) dest= 201.70.32.101, 
    src= 201.70.32.82, dest_proxy= 10.2.2.0/255.255.255.0/0/0 
    (type=4), src_proxy= 10.2.1.1/255.255.255.255/0/0 (type=1),
    protocol= ESP, transform= esp-des esp-md5-hmac ,
    lifedur= 0s and 0kb, spi= 0x0(0), conn_id= 0, keysize= 0, 
    flags= 0x4
Apr 18 15:18:09: validate proposal request 0
Apr 18 15:18:09: ISAKMP (0:5): processing NONCE payload. 
    message ID = -617682048
Apr 18 15:18:09: ISAKMP (0:5): processing ID payload. 
    message ID = -617682048
Apr 18 15:18:09: ISAKMP (5): ID_IPV4_ADDR src 10.2.1.1 
    prot 0 port 0
Apr 18 15:18:09: ISAKMP (0:5): processing ID payload. 
    message ID = -617682048
Apr 18 15:18:09: ISAKMP (5): ID_IPV4_ADDR_SUBNET dst 
    10.2.2.0/255.255.255.0 prot 0 port 0
Apr 18 15:18:09: IPSEC(key_engine): got a queue event...
Apr 18 15:18:09: IPSEC(spi_response): getting spi 
    153684796 for SA from 201.70.32.82    to 201.70.32.101   
    for prot 3
Apr 18 15:18:09: CryptoEngine0: generate hmac context 
    for conn id 5
Apr 18 15:18:09: ISAKMP (5): sending packet to 201.70.32.82 
    (R) QM_IDLE
Apr 18 15:18:09: ISAKMP (5): received packet from 201.70.32.82 
    (R) QM_IDLE
Apr 18 15:18:09: CryptoEngine0: generate hmac context 
    for conn id 5
Apr 18 15:18:09: ISAKMP (0:5): processing SA payload. 
    message ID = -1078114754
Apr 18 15:18:09: ISAKMP (0:5): Checking IPSec proposal 1
Apr 18 15:18:10: ISAKMP: transform 1, ESP_DES
Apr 18 15:18:10: ISAKMP:   attributes in transform:
Apr 18 15:18:10: ISAKMP:      authenticator is HMAC-MD5
Apr 18 15:18:10: ISAKMP:      encaps is 1
Apr 18 15:18:10: validate proposal 0
Apr 18 15:18:10: ISAKMP (0:5): atts are acceptable.
Apr 18 15:18:10: IPSEC(validate_proposal_request): 
    proposal part #1, (key eng. msg.) dest= 201.70.32.101, 
    src= 201.70.32.82, dest_proxy= 10.2.2.0/255.255.255.0/0/0 
    (type=4), src_proxy= 10.2.1.1/255.255.255.255/0/0 (type=1),
    protocol= ESP, transform= esp-des esp-md5-hmac ,
    lifedur= 0s and 0kb, spi= 0x0(0), conn_id= 0, keysize= 0, 
    flags= 0x4
Apr 18 15:18:10: validate proposal request 0
Apr 18 15:18:10: ISAKMP (0:5): processing NONCE payload. 
    message ID = -1078114754
Apr 18 15:18:10: ISAKMP (0:5): processing ID payload. 
    message ID = -1078114754
Apr 18 15:18:10: ISAKMP (5): ID_IPV4_ADDR src 10.2.1.1 
    prot 0 port 0
Apr 18 15:18:10: ISAKMP (0:5): processing ID payload. 
    message ID = -1078114754
Apr 18 15:18:10: ISAKMP (5): ID_IPV4_ADDR_SUBNET dst 
    10.2.2.0/255.255.255.0 prot 0 port 0
Apr 18 15:18:10: IPSEC(key_engine): got a queue event...
Apr 18 15:18:10: IPSEC(spi_response): getting spi 224008976 
    for SA from 201.70.32.82    to 201.70.32.101   
    for prot 3
Apr 18 15:18:10: CryptoEngine0: generate hmac context 
    for conn id 5
Apr 18 15:18:10: ISAKMP (5): sending packet to 201.70.32.82 
    (R) QM_IDLE
Apr 18 15:18:10: ISAKMP (5): received packet from 201.70.32.82 
    (R) QM_IDLE
Apr 18 15:18:10: CryptoEngine0: generate hmac context 
    for conn id 5
Apr 18 15:18:10: ipsec allocate flow 0
Apr 18 15:18:10: ipsec allocate flow 0
Apr 18 15:18:10: ISAKMP (0:5): Creating IPSec SAs
Apr 18 15:18:10:         inbound SA from 201.70.32.82    
    to 201.70.32.101   (proxy 10.2.1.1        to 10.2.2.0)
Apr 18 15:18:10:         has spi 224008976 and conn_id 2000 
    and flags 4
Apr 18 15:18:10:         outbound SA from 201.70.32.101   
    to 201.70.32.82    (proxy 10.2.2.0        to 10.2.1.1)
Apr 18 15:18:10:         has spi -1084694986 and conn_id 2001 
    and flags 4
Apr 18 15:18:10: ISAKMP (0:5): deleting node -1078114754
Apr 18 15:18:10: IPSEC(key_engine): got a queue event...
Apr 18 15:18:10: IPSEC(initialize_sas): ,
  (key eng. msg.) dest= 201.70.32.101, src= 201.70.32.82,
    dest_proxy= 10.2.2.0/255.255.255.0/0/0 (type=4),
    src_proxy= 10.2.1.1/0.0.0.0/0/0 (type=1),
    protocol= ESP, transform= esp-des esp-md5-hmac ,
    lifedur= 0s and 0kb,
    spi= 0xD5A1B10(224008976), conn_id= 2000, keysize= 0, 
    flags= 0x4
Apr 18 15:18:10: IPSEC(initialize_sas): ,
  (key eng. msg.) src= 201.70.32.101, dest= 201.70.32.82,
    src_proxy= 10.2.2.0/255.255.255.0/0/0 (type=4),
    dest_proxy= 10.2.1.1/0.0.0.0/0/0 (type=1),
    protocol= ESP, transform= esp-des esp-md5-hmac ,
    lifedur= 0s and 0kb,
    spi= 0xBF58DE36(3210272310), conn_id= 2001, keysize= 0, 
    flags= 0x4
Apr 18 15:18:10: IPSEC(create_sa): sa created,
  (sa) sa_dest= 201.70.32.101, sa_prot= 50,
    sa_spi= 0xD5A1B10(224008976),
    sa_trans= esp-des esp-md5-hmac , sa_conn_id= 2000
Apr 18 15:18:10: IPSEC(create_sa): sa created,
  (sa) sa_dest= 201.70.32.82, sa_prot= 50,
    sa_spi= 0xBF58DE36(3210272310),
    sa_trans= esp-des esp-md5-hmac , sa_conn_id= 2001
Apr 18 15:18:10: ISAKMP: Locking struct 14D0DC for IPSEC
Apr 18 15:18:24: ISAKMP (0:5): retransmitting 
    phase 2 -617682048 ...
Apr 18 15:18:24: ISAKMP (5): sending packet to 201.70.32.82 
    (R) QM_IDLE

Router#show crypto ipsec
Apr 18 15:18:39: ISAKMP (0:5): retransmitting 
    phase 2 -617682048 ...
Apr 18 15:18:39: ISAKMP (5): sending packet to 201.70.32.82 
    (R) QM_IDLE      sa

interface: Ethernet0
    Crypto map tag: intmap, local addr. 201.70.32.101

   local  ident (addr/mask/prot/port): 
   (10.2.2.0/255.255.255.0/0/0)
   remote ident (addr/mask/prot/port): 
   (10.2.1.1/255.255.255.255/0/0)
   current_peer: 201.70.32.82
     PERMIT, flags={}
    #pkts encaps: 7, #pkts encrypt: 7, #pkts digest 7
    #pkts decaps: 7, #pkts decrypt: 7, #pkts verify 7
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0, 
    #pkts decompress failed: 0
    #send errors 0, #recv errors 0

     local crypto endpt.: 201.70.32.101, remote 
     crypto endpt.: 201.70.32.82
     path mtu 1500, media mtu 1500
     current outbound spi: BF58DE36

     inbound esp sas:
      spi: 0xD5A1B10(224008976)
        transform: esp-des esp-md5-hmac ,
        in use settings ={Tunnel, }
        slot: 0, conn id: 2000, flow_id: 1, 
        crypto map: intmap
        sa timing: remaining key lifetime 
       (k/sec): (4607999/3500)
        IV size: 8 bytes
        replay detection support: Y


     inbound ah sas:


     inbound pcp sas:


     outbound esp sas:
      spi: 0xBF58DE36(3210272310)
        transform: esp-des esp-md5-hmac ,
        in use settings ={Tunnel, }
        slot: 0, conn id: 2001, flow_id: 2, 
     crypto map: intmap
        sa timing: remaining key lifetime 
        (k/sec): (4607999/3500)
        IV size: 8 bytes
        replay detection support: Y


     outbound ah sas:

     outbound pcp sas:

Router#sho crypto engine connections active

  ID Interface       IP-Address      State  Algorithm     Encrypt  Decrypt
   5                     set    HMAC_MD5+DES_56_CB        0        0
2000 Ethernet0       201.70.32.101   set    HMAC_MD5+DES_56_CB  0        7
2001 Ethernet0       201.70.32.101   set    HMAC_MD5+DES_56_CB  7        0
Crypto adjacency count : Lock: 0, Unlock: 0

VPN-clientinformatie 
Client configuration:
C:\>ping -t 10.2.2.5
Reply from 10.2.2.5: bytes=32 time<0ms TTL=352

Reply from 10.2.2.5: bytes=32 time<10ms TTL=352

From Logview:
14:25:34.044 New Connection - Initiating IKE 
    Phase 1 (IP ADDR=201.70.32.101)

14:25:34.144 New Connection - SENDING>>>> ISAKMP 
    OAK MM (SA)
14:25:35.886 New Connection - RECEIVED<<< ISAKMP 
    OAK MM (SA)
14:25:36.067 New Connection - SENDING>>>> ISAKMP 
    OAK MM (KE, NON, VID, VID)
14:25:38.310 New Connection - RECEIVED<<< ISAKMP 
    OAK MM (KE, NON, VID)
14:25:38.460 New Connection - SENDING>>>> ISAKMP 
    OAK MM *(ID, HASH, NOTIFY:STATUS_INITIAL_CONTACT)
14:25:38.610 New Connection - RECEIVED<<< ISAKMP 
    OAK MM *(ID, HASH)
14:25:38.710 New Connection - Established IKE SA
14:25:38.811 New Connection - Initiating IKE Phase 
    2 with Client IDs (message id
: B01876)
14:25:38.911   Initiator = IP ADDR=201.70.32.82, 
    prot = 0 port = 0

14:25:39.011   Responder = IP SUBNET/MASK=10.2.2.0/255.255.255.0, 
    prot = 0 port = 0

14:25:39.111 New Connection - SENDING>>>> 
    ISAKMP OAK QM *(HASH, SA, NON, ID, ID)
14:25:39.251 New Connection - RECEIVED<<< ISAKMP 
    OAK TRANS *(HASH, ATTR)
14:25:39.351 New Connection - Received Private IP 
    Address = IP ADDR=10.2.1.1

14:25:39.451 New Connection - Discarding IPSec SA 
    negotiation (message id: B01876)
14:25:39.552 New Connection - SENDING>>>> ISAKMP OAK 
    TRANS *(HASH, ATTR)
14:25:40.022 New Connection - Received message for discarded 
    IPSec SA negotiation (message id: B01876)
14:25:40.122 New Connection - Initiating IKE Phase 2 with 
    Client IDs (message id: C8CB0CE)
14:25:40.223   Initiator = IP ADDR=10.2.1.1, prot = 0 port = 0
14:25:40.323   Responder = IP SUBNET/MASK=10.2.2.0/255.255.255.0, 
    prot = 0 port = 0
14:25:40.423 New Connection - SENDING>>>> ISAKMP OAK 
    QM *(HASH, SA, NON, ID, ID)
14:25:40.873 New Connection - RECEIVED<<< ISAKMP OAK 
    QM *(HASH, SA, NON, ID, ID,
 NOTIFY:STATUS_RESP_LIFETIME)
14:25:40.974 New Connection - SENDING>>>> ISAKMP OAK 
    QM *(HASH)
14:25:41.074 New Connection - Loading IPSec SA 
    (Message ID = C8CB0CE OUTBOUND SPI = 19A22423 
    INBOUND SPI = E4829433)
14:25:41.174

Gerelateerde informatie

Was dit document nuttig?

FeedbackFeedback

Contact Cisco