この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
この章の内容は、次のとおりです。
障害サマリー
コマンドまたはアクション | 目的 |
---|
次に、障害のサマリーの例を示します。
Server # scope fault Server /fault # show fault-entries Time Severity Description ------------------------ ------------ ----------------- Sun Jun 27 04:00:52 2013 info Storage Local disk 12 missing Sat Jun 26 05:00:22 2013 warning Power Supply redundancy is lost Server /fault #
障害履歴
コマンドまたはアクション | 目的 |
---|
次に、障害の履歴を表示する例を示します。
Server # scope fault Server /fault # show fault-history Time Severity Source Cause Description ------------------- --------- ------ -------------------- ---------------------------------------- 2014 Feb 6 23:24:49 error %CIMC PSU_REDUNDANCY-FAIL "[F0743][major][psu-redundancy-fail]..... 2014 Feb 6 23:24:49 error %CIMC EQUIPMENT_INOPERABLE "[F0374][major][equipment-inoperable]... 2014 Feb 6 23:24:19 debug %CIMC 2014 Feb 6 23 "24:19:7:%CIMC::: SEL INIT DONE" Server /fault #
Cisco IMC ログ
コマンドまたはアクション | 目的 |
---|
次に、Cisco IMC イベントのログを表示する例を示します。
Server# scope cimc Server /cimc # scope log Server /cimc/log # show entries Time Severity Source Description ------------------- ------------- ---------------- ---------------------------------------- 2012 Jan 30 05:20:45 Informational BMC:ciscoNET:961 " rpc_aim_callback_function_1_svc() - result == SUCCESS, callbackData size: 600 " 2012 Jan 30 05:20:45 Informational BMC:ciscoNET:961 rpc_aim_callback_function_1_svc() - returned from pFunctionCallback result:0 2012 Jan 30 05:20:45 Informational BMC:ciscoNET:961 " rpc_aim_callback_function_1_svc() - szFunctionName:netGetCurrentIfConfig nSize:0 nMaxSize: 600 " --More-- Server /cimc/log # show entries detail Trace Log: Time: 2012 Jan 30 05:20:45 Severity: Informational Source: BMC:ciscoNET:961 Description: " rpc_aim_callback_function_1_svc() - result == SUCCESS, callbackData size: 600 " Order: 0 Trace Log: Time: 2012 Jan 30 05:20:45 Severity: Informational Source: BMC:ciscoNET:961 Description: rpc_aim_callback_function_1_svc() - returned from pFunctionCallback result:0 Order: 1 Trace Log: Time: 2012 Jan 30 05:20:45 Severity: Informational Source: BMC:ciscoNET:961 Description: " rpc_aim_callback_function_1_svc() - szFunctionName:netGetCurrentIfConfig nSize:0 nMaxSize: 600 " Order: 2 --More-- Server /cimc/log #
コマンドまたはアクション | 目的 |
---|
次に、Cisco IMC イベントのログをクリアする例を示します。
Server# scope cimc Server /cimc # scope log Server /cimc/log # clear
Cisco IMC ログに含まれるメッセージの最低レベルを指定できます。
次に、最小重大度を警告として、メッセージのロギングを設定する例を示します。
Server# scope cimc Server /cimc # scope log Server /cimc/log # set local-syslog-severity warning Server /cimc/log *# commit Server /cimc/log # show local-syslog-severity Local Syslog Severity: warning Server /cimc/log #
Cisco IMC ログ エントリを受信するように 1 台または 2 台のリモート syslog サーバのプロファイルを設定できます。
コマンドまたはアクション | 目的 | |||
---|---|---|---|---|
ステップ 1 | Server# scope cimc |
Cisco IMC コマンド モードを開始します。 | ||
ステップ 2 | Server /cimc # scope log |
Cisco IMC ログ コマンド モードを開始します。 | ||
ステップ 3 | Server /cimc/log # set remote-syslog-severity level | (任意)
重大度の level には、次のいずれかを指定できます。順に重大度が下がります。
| ||
ステップ 4 | Server /cimc/log # scope server {1 | 2} |
2 台のリモート syslog サーバ プロファイルのいずれかを選択し、プロファイルを設定するコマンド モードを開始します。 | ||
ステップ 5 | Server /cimc/log/server # set server-ip ipv4 or ipv6 address or domain name |
| ||
ステップ 6 | Server /cimc/log/server # set server-port port number |
リモート syslog サーバの宛先ポート番号を設定します。 | ||
ステップ 7 | Server /cimc/log/server # set enabled {yes | no} |
この syslog サーバへの Cisco IMC ログ エントリの送信を有効にします。 | ||
ステップ 8 | Server /cimc/log/server # commit |
トランザクションをシステム設定にコミットします。 |
次に、リモート syslog サーバ プロファイルを設定し、重大度レベル Warning 以上の Cisco IMC ログ エントリの送信を有効にする例を示します。
Server# scope cimc Server /cimc # scope log Server /cimc/log # set remote-syslog-severity warning Server /cimc/log *# scope server 1 Server /cimc/log/server *# set server-ip www.abc.com Server /cimc/log/server *# set server-port 514 Server /cimc/log/server *# set enabled yes Server /cimc/log/server *# commit Server /cimc/log/server # exit Server /cimc/log # show server Syslog Server 1: Syslog Server Address: www.abc.com Syslog Server Port: 514 Enabled: yes Server /cimc/log # show remote-syslog-severity Remote Syslog Severity: warning Server /cimc/log #
システム イベント ログ
コマンドまたはアクション | 目的 |
---|
次に、システム イベント ログを表示する例を示します。
Server# scope sel Server /sel # show entries Time Severity Description ------------------- ------------- ---------------------------------------- [System Boot] Informational " LED_PSU_STATUS: Platform sensor, OFF event was asserted" [System Boot] Informational " LED_HLTH_STATUS: Platform sensor, GREEN was asserted" [System Boot] Normal " PSU_REDUNDANCY: PS Redundancy sensor, Fully Redundant was asserted" [System Boot] Normal " PSU2 PSU2_STATUS: Power Supply sensor for PSU2, Power Supply input lost (AC/DC) was deasserted" [System Boot] Informational " LED_PSU_STATUS: Platform sensor, ON event was asserted" [System Boot] Informational " LED_HLTH_STATUS: Platform sensor, AMBER was asserted" [System Boot] Critical " PSU_REDUNDANCY: PS Redundancy sensor, Redundancy Lost was asserted" [System Boot] Critical " PSU2 PSU2_STATUS: Power Supply sensor for PSU2, Power Supply input lost (AC/DC) was asserted" [System Boot] Normal " HDD_01_STATUS: Drive Slot sensor, Drive Presence was asserted" [System Boot] Critical " HDD_01_STATUS: Drive Slot sensor, Drive Presence was deasserted" [System Boot] Informational " DDR3_P2_D1_INFO: Memory sensor, OFF event was asserted" 2001-01-01 08:30:16 Warning " PSU2 PSU2_VOUT: Voltage sensor for PSU2, failure event was deasserted" 2001-01-01 08:30:16 Critical " PSU2 PSU2_VOUT: Voltage sensor for PSU2, non-recoverable event was deasserted" 2001-01-01 08:30:15 Informational " LED_PSU_STATUS: Platform sensor, ON event was asserted" 2001-01-01 08:30:15 Informational " LED_HLTH_STATUS: Platform sensor, AMBER was asserted" 2001-01-01 08:30:15 Informational " LED_HLTH_STATUS: Platform sensor, FAST BLINK event was asserted" 2001-01-01 08:30:14 Non-Recoverable " PSU2 PSU2_VOUT: Voltage sensor for PSU2, non-recoverable event was asserted" 2001-01-01 08:30:14 Critical " PSU2 PSU2_VOUT: Voltage sensor for PSU2, failure event was asserted" --More--
コマンドまたはアクション | 目的 |
---|
次に、システム イベント ログをクリアする例を示します。
Server# scope sel Server /sel # clear This operation will clear the whole sel. Continue?[y|N]y
ロギング制御
Cisco IMC ログに含まれるメッセージの最低レベルを指定できます。
コマンドまたはアクション | 目的 | |||
---|---|---|---|---|
ステップ 1 | Server# scope cimc |
Cisco IMC コマンド モードを開始します。 | ||
ステップ 2 | Server /cimc # scope log |
Cisco IMC ログ コマンド モードを開始します。 | ||
ステップ 3 | Server /cimc/log # setlocal-syslog-severity level |
重大度の level には、次のいずれかを指定できます。順に重大度が下がります。
| ||
ステップ 4 | Server /cimc/log # commit |
トランザクションをシステム設定にコミットします。 | ||
ステップ 5 | Server /cimc/log # showlocal-syslog-severity | (任意)
設定された重大度レベルを表示します。 |
次に、最小重大度を警告として、メッセージのロギングを設定する例を示します。
Server# scope cimc Server /cimc # scope log Server /cimc/log # set local-syslog-severity warning Server /cimc/log *# commit Server /cimc/log # show local-syslog-severity Local Syslog Severity: warning Server /cimc/log #
Cisco IMC ログ エントリを受信するように 1 台または 2 台のリモート syslog サーバのプロファイルを設定できます。
コマンドまたはアクション | 目的 | |||
---|---|---|---|---|
ステップ 1 | Server# scope cimc |
Cisco IMC コマンド モードを開始します。 | ||
ステップ 2 | Server /cimc # scope log |
Cisco IMC ログ コマンド モードを開始します。 | ||
ステップ 3 | Server /cimc/log # set remote-syslog-severity level | (任意)
重大度の level には、次のいずれかを指定できます。順に重大度が下がります。
| ||
ステップ 4 | Server /cimc/log # scope server {1 | 2} |
2 台のリモート syslog サーバ プロファイルのいずれかを選択し、プロファイルを設定するコマンド モードを開始します。 | ||
ステップ 5 | Server /cimc/log/server # set server-ip ipv4 or ipv6 address or domain name |
| ||
ステップ 6 | Server /cimc/log/server # set server-port port number |
リモート syslog サーバの宛先ポート番号を設定します。 | ||
ステップ 7 | Server /cimc/log/server # set enabled {yes | no} |
この syslog サーバへの Cisco IMC ログ エントリの送信を有効にします。 | ||
ステップ 8 | Server /cimc/log/server # commit |
トランザクションをシステム設定にコミットします。 |
次に、リモート syslog サーバ プロファイルを設定し、重大度レベル Warning 以上の Cisco IMC ログ エントリの送信を有効にする例を示します。
Server# scope cimc Server /cimc # scope log Server /cimc/log # set remote-syslog-severity warning Server /cimc/log *# scope server 1 Server /cimc/log/server *# set server-ip www.abc.com Server /cimc/log/server *# set server-port 514 Server /cimc/log/server *# set enabled yes Server /cimc/log/server *# commit Server /cimc/log/server # exit Server /cimc/log # show server Syslog Server 1: Syslog Server Address: www.abc.com Syslog Server Port: 514 Enabled: yes Server /cimc/log # show remote-syslog-severity Remote Syslog Severity: warning Server /cimc/log #
コマンドまたはアクション | 目的 |
---|
次に、テスト Cisco IMC の syslog を設定したリモート サーバに送信する例を示します。
Server# scope cimc Server /cimc # scope log Server /cimc/log # send-test-syslog Syslog Test message will be sent to configured Syslog destinations. If no Syslog destinations configured, this command will be silently ignored. Syslog Test message has been requested. Server /cimc/log #