この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
目次
この章は、次の内容で構成されています。
C シリーズ サーバは、使用する C シリーズ サーバ モデルに特有のシスコ認定ファームウェアを使用します。 すべてのサポート対象サーバ モデルのファームウェアの新しいリリースは、Cisco.com からダウンロードできます。
注意 |
新しい BIOS ファームウェアをインストールする場合は、サーバで動作している CIMC ファームウェアと同じソフトウェア リリースの BIOS ファームウェアにする必要があります。 一致する CIMC ファームウェアをアクティブ化するまでは、新しい BIOS ファームウェアをインストールしないでください。インストールすると、サーバがブートしなくなります。 問題の発生を回避するために、Cisco Host Upgrade Utility(HUU)を使用することを強くお勧めします。これにより、BIOS、CIMC、その他のファームウェアが、互換性のあるレベルにアップグレードされます。 このユーティリティの詳細については、インストールする CIMC ソフトウェア リリースに合ったバージョンの HUU の『Cisco Host Upgrade Utility Guide』を参照してください。 HUU ガイドは次の URL で入手できます。http://www.cisco.com/en/US/products/ps10493/products_user_guide_list.html。 |
ファームウェアを手動で更新する場合は、最初に CIMC ファームウェアを更新する必要があります。 CIMC ファームウェアの更新プロセスは、次の段階に分けられます。これは、サーバがオフラインになる時間を最小限にするためです。
インストール。 この段階では、CIMC は、選択した CIMC ファームウェアをサーバの非アクティブまたはバックアップ スロットにインストールします。
アクティブ化。 この段階では、CIMC は非アクティブ ファームウェア バージョンをアクティブとして設定してサーバをリブートします。これにより、サービスが中断されます。 サーバをリブートすると、新規のアクティブ スロット内のファームウェアが、実行中のバージョンになります。
CIMC ファームウェアをアクティブ化した後は、BIOS ファームウェアを更新できます。 BIOS 更新プロセス中は、サーバの電源をオフにする必要があります。そうしないと、プロセスが複数の段階に分けられません。 その代り、発行するコマンドは 1 つで済みます。CIMC は BIOS ファームウェアをできる限り迅速にインストールし、更新します。 CIMC がリブートを完了すると、サーバの電源をオンにして、サービスに戻すことができます。
(注) |
古いファームウェア バージョンを新しいものにアップグレードしたり、新しいファームウェア バージョンを古いものにダウングレードしたりできます。 |
ステップ 1 | http://www.cisco.com/ にアクセスします。 |
ステップ 2 | まだログインしていない場合は、ページの右上隅にある [ログイン] をクリックし、Cisco.com のクレデンシャルを使用してログインします。 |
ステップ 3 | 上部のメニュー バーで、[サポート] をクリックします。 |
ステップ 4 | ロール ダウン メニューの [すべてのダウンロード] をクリックします。 |
ステップ 5 | 使用しているサーバ モデルが [最近使用した製品] リストに表示される場合は、サーバ名をクリックします。 含まれていない場合は、次の手順を実行します。 |
ステップ 6 | [ユニファイド コンピューティング システム(UCS)サーバ ファームウェア] リンクをクリックします。 |
ステップ 7 | (任意)ページに左側にあるメニュー バーから以前のリリースを選択します。 |
ステップ 8 | 選択したリリースの Cisco Host Upgrade Utility ISO に関連付けられている [ダウンロード] ボタンをクリックします。 |
ステップ 9 | [使用許諾契約に同意] をクリックします。 |
ステップ 10 |
ISO ファイルをローカル ドライブに保存します。 Cisco Host Upgrade Utility が含まれているこの ISO ファイルを使用して、CIMC と BIOS ファームウェアをアップグレードすることをお勧めします。 このユーティリティの詳細については、インストールする CIMC ソフトウェア リリースに合ったバージョンの HUU の『Cisco Host Upgrade Utility Guide』を参照してください。 HUU ガイドは次の URL で入手できます。http://www.cisco.com/en/US/products/ps10493/products_user_guide_list.html。 |
ステップ 11 |
(任意) CIMC と BIOS ファームウェアを手動でアップグレードする場合は、次の手順を実行します。
|
ステップ 12 |
(任意)ファームウェアをリモート サーバからインストールする場合は、BIOS インストール CAP ファイルと CIMC インストール BIN ファイルを、使用するリモート サーバにコピーします。
サーバにはリモート サーバのコピー先フォルダに対する読み取り権限が必要です。 |
Cisco Host Upgrade Utility を使用してサーバのすべてのファームウェアをアップグレードするか、サーバ上に CIMC ファームウェアを手動でインストールします。
CIMC CLI に、admin 権限を持つユーザとしてログインします。
Cisco.com から Cisco Host Upgrade Utility ISO ファイルを入手し、シスコからのファームウェアの入手の説明に従ってファームウェア インストール ファイルを抽出します。
(注) |
アップデートがすでに処理中であるときにアップデートを開始すると、どちらのアップデートも失敗します。 |
次に、CIMC ファームウェアをアップデートする例を示します。
Server# scope cimc Server /cimc # scope firmware Server /cimc/firmware # update ftp 192.0.20.34 //test/dnld-ucs-k9-bundle.1.0.2h.bin <CR> Press Enter key Firmware update has started. Please check the status using "show detail" Server /cimc/firmware #
新しいファームウェアをアクティブにします。
CIMC ファームウェアをサーバにインストールします。
アクティベーションの進行中には、次のことは行わないでください。
この例ではファームウェア イメージ 1 をアクティブにし、BMC がリブートした後にアクティベーションを確認しています。
Server# scope cimc Server /cimc # scope firmware Server /cimc/firmware # show detail Firmware Image Information: Update Stage: NONE Update Progress: 100 Current FW Version: 1.3(3a) FW Image 1 Version: 1.4(3j) FW Image 1 State: BACKUP INACTIVATED FW Image 2 Version: 1.3(3a) FW Image 2 State: RUNNING ACTIVATED Boot-loader Version: 1.4(3.21).18 Server /cimc/firmware # activate 1 This operation will activate firmware 1 and reboot the BMC. Continue?[y|N]y . . -- BMC reboot -- . . -- Log into CLI as Admin -- Server# scope cimc Server /cimc # scope firmware Server /cimc/firmware # show detail Firmware Image Information: Update Stage: NONE Update Progress: 100 Current FW Version: 1.4(3j) FW Image 1 Version: 1.4(3j) FW Image 1 State: RUNNING ACTIVATED FW Image 2 Version: 1.3(3a) FW Image 2 State: BACKUP INACTIVATED Boot-loader Version: 1.4(3.21).18
(注) |
この手順は、一部のサーバでは使用できません。 他の BIOS インストール方法については、次の URL で入手できる『Cisco UCS C-Series Rack-Mount Server BIOS Upgrade Guide』を参照してください。http://www.cisco.com/en/US/docs/unified_computing/ucs/c/sw/bios/b_Upgrading_BIOS_Firmware.html。 |
CIMC CLI に、admin 権限を持つユーザとしてログインします。
インストールする BIOS バージョンに合った CIMC ファームウェアを、インストールした CIMC ファームウェアのアクティブ化に従って、アクティブ化します。
サーバの電源を切ります。
(注) |
アップデートがすでに処理中であるときにアップデートを開始すると、どちらのアップデートも失敗します。 |
コマンドまたはアクション | 目的 | |
---|---|---|
ステップ 1 | Server# scope cimc | CIMC コマンド モードを開始します。 |
ステップ 2 | Server /cimc # scope firmware | ファームウェア コマンド モードを開始します。 |
ステップ 3 | Server /cimc/firmware # show detail | 使用可能なファームウェア イメージおよびステータスを表示します。 |
ステップ 4 | [Current FW Version] フィールドに表示されるファームウェア バージョンが、インストールする BIOS ファームウェア バージョンと一致するかどうか確認します。 |
CIMC ファームウェア バージョンが一致しない場合は、この手順を続行する前に CIMC ファームウェアをアクティブ化します。そうしないとサーバがブートしません。 詳細については、『インストールした CIMC ファームウェアのアクティブ化』を参照してください。 |
ステップ 5 | Server /cimc/firmware # top | サーバのルート レベルに戻ります。 |
ステップ 6 | Server# scope bios | BIOS コマンド モードを開始します。 |
ステップ 7 | Server /bios # update protocol | 使用されるプロトコルを指定します。 TFTP、FTP、SFTP、SCP、または HTTP が使用できます。 |
ステップ 8 | Server /bios # update IP Address | リモート サーバの IP アドレスまたはホスト名を指定します。 |
ステップ 9 | Server /bios # update path | リモート サーバ上の BIOS ファームウェア ファイルへのファイル パスを指定します。 |
次に、BIOS ファームウェアを CIMC ソフトウェア リリース 1.4(3j) に更新する例を示します。
Server# scope cimc Server /cimc # scope firmware Server /cimc/firmware # show detail Firmware Image Information: Update Stage: NONE Update Progress: 100 Current FW Version: 1.4(3j) FW Image 1 Version: 1.4(3j) FW Image 1 State: RUNNING ACTIVATED FW Image 2 Version: 1.3(3a) FW Image 2 State: BACKUP INACTIVATED Boot-loader Version: 1.4(3.21).18 Server /cimc/firmware # top Server # scope bios Server /bios # update ftp 192.0.20.34 //upgrade_bios_files/C260-BIOS-1-4-3j-0.CAP <CR> Press Enter key Firmware update has started. Please check the status using "show detail" Server /bios #
目次
この章は、次の内容で構成されています。
- ファームウェアの概要
- シスコからのファームウェアの入手
- リモート サーバからの CIMC ファームウェアのインストール
- インストールした CIMC ファームウェアのアクティブ化
- リモート サーバからの BIOS ファームウェアのインストール
ファームウェアの概要
C シリーズ サーバは、使用する C シリーズ サーバ モデルに特有のシスコ認定ファームウェアを使用します。 すべてのサポート対象サーバ モデルのファームウェアの新しいリリースは、Cisco.com からダウンロードできます。
注意
新しい BIOS ファームウェアをインストールする場合は、サーバで動作している CIMC ファームウェアと同じソフトウェア リリースの BIOS ファームウェアにする必要があります。 一致する CIMC ファームウェアをアクティブ化するまでは、新しい BIOS ファームウェアをインストールしないでください。インストールすると、サーバがブートしなくなります。
問題の発生を回避するために、Cisco Host Upgrade Utility(HUU)を使用することを強くお勧めします。これにより、BIOS、CIMC、その他のファームウェアが、互換性のあるレベルにアップグレードされます。 このユーティリティの詳細については、インストールする CIMC ソフトウェア リリースに合ったバージョンの HUU の『Cisco Host Upgrade Utility Guide』を参照してください。 HUU ガイドは次の URL で入手できます。http://www.cisco.com/en/US/products/ps10493/products_user_guide_list.html。
ファームウェアを手動で更新する場合は、最初に CIMC ファームウェアを更新する必要があります。 CIMC ファームウェアの更新プロセスは、次の段階に分けられます。これは、サーバがオフラインになる時間を最小限にするためです。
インストール。 この段階では、CIMC は、選択した CIMC ファームウェアをサーバの非アクティブまたはバックアップ スロットにインストールします。
アクティブ化。 この段階では、CIMC は非アクティブ ファームウェア バージョンをアクティブとして設定してサーバをリブートします。これにより、サービスが中断されます。 サーバをリブートすると、新規のアクティブ スロット内のファームウェアが、実行中のバージョンになります。
CIMC ファームウェアをアクティブ化した後は、BIOS ファームウェアを更新できます。 BIOS 更新プロセス中は、サーバの電源をオフにする必要があります。そうしないと、プロセスが複数の段階に分けられません。 その代り、発行するコマンドは 1 つで済みます。CIMC は BIOS ファームウェアをできる限り迅速にインストールし、更新します。 CIMC がリブートを完了すると、サーバの電源をオンにして、サービスに戻すことができます。
(注)
古いファームウェア バージョンを新しいものにアップグレードしたり、新しいファームウェア バージョンを古いものにダウングレードしたりできます。
シスコからのファームウェアの入手
手順
ステップ 1 http://www.cisco.com/ にアクセスします。 ステップ 2 まだログインしていない場合は、ページの右上隅にある [ログイン] をクリックし、Cisco.com のクレデンシャルを使用してログインします。 ステップ 3 上部のメニュー バーで、[サポート] をクリックします。 ステップ 4 ロール ダウン メニューの [すべてのダウンロード] をクリックします。 ステップ 5 使用しているサーバ モデルが [最近使用した製品] リストに表示される場合は、サーバ名をクリックします。 含まれていない場合は、次の手順を実行します。 ステップ 6 [ユニファイド コンピューティング システム(UCS)サーバ ファームウェア] リンクをクリックします。 ステップ 7 (任意)ページに左側にあるメニュー バーから以前のリリースを選択します。 ステップ 8 選択したリリースの Cisco Host Upgrade Utility ISO に関連付けられている [ダウンロード] ボタンをクリックします。 ステップ 9 [使用許諾契約に同意] をクリックします。 ステップ 10 ISO ファイルをローカル ドライブに保存します。 Cisco Host Upgrade Utility が含まれているこの ISO ファイルを使用して、CIMC と BIOS ファームウェアをアップグレードすることをお勧めします。 このユーティリティの詳細については、インストールする CIMC ソフトウェア リリースに合ったバージョンの HUU の『Cisco Host Upgrade Utility Guide』を参照してください。 HUU ガイドは次の URL で入手できます。http://www.cisco.com/en/US/products/ps10493/products_user_guide_list.html。
ステップ 11 (任意) CIMC と BIOS ファームウェアを手動でアップグレードする場合は、次の手順を実行します。
ステップ 12 (任意)ファームウェアをリモート サーバからインストールする場合は、BIOS インストール CAP ファイルと CIMC インストール BIN ファイルを、使用するリモート サーバにコピーします。 サーバにはリモート サーバのコピー先フォルダに対する読み取り権限が必要です。
次の作業
Cisco Host Upgrade Utility を使用してサーバのすべてのファームウェアをアップグレードするか、サーバ上に CIMC ファームウェアを手動でインストールします。
リモート サーバからの CIMC ファームウェアのインストール
はじめる前に手順
CIMC CLI に、admin 権限を持つユーザとしてログインします。
Cisco.com から Cisco Host Upgrade Utility ISO ファイルを入手し、シスコからのファームウェアの入手の説明に従ってファームウェア インストール ファイルを抽出します。
(注)
アップデートがすでに処理中であるときにアップデートを開始すると、どちらのアップデートも失敗します。
次の作業次に、CIMC ファームウェアをアップデートする例を示します。
Server# scope cimc Server /cimc # scope firmware Server /cimc/firmware # update ftp 192.0.20.34 //test/dnld-ucs-k9-bundle.1.0.2h.bin <CR> Press Enter key Firmware update has started. Please check the status using "show detail" Server /cimc/firmware #
新しいファームウェアをアクティブにします。
インストールした CIMC ファームウェアのアクティブ化
手順
この例ではファームウェア イメージ 1 をアクティブにし、BMC がリブートした後にアクティベーションを確認しています。
Server# scope cimc Server /cimc # scope firmware Server /cimc/firmware # show detail Firmware Image Information: Update Stage: NONE Update Progress: 100 Current FW Version: 1.3(3a) FW Image 1 Version: 1.4(3j) FW Image 1 State: BACKUP INACTIVATED FW Image 2 Version: 1.3(3a) FW Image 2 State: RUNNING ACTIVATED Boot-loader Version: 1.4(3.21).18 Server /cimc/firmware # activate 1 This operation will activate firmware 1 and reboot the BMC. Continue?[y|N]y . . -- BMC reboot -- . . -- Log into CLI as Admin -- Server# scope cimc Server /cimc # scope firmware Server /cimc/firmware # show detail Firmware Image Information: Update Stage: NONE Update Progress: 100 Current FW Version: 1.4(3j) FW Image 1 Version: 1.4(3j) FW Image 1 State: RUNNING ACTIVATED FW Image 2 Version: 1.3(3a) FW Image 2 State: BACKUP INACTIVATED Boot-loader Version: 1.4(3.21).18リモート サーバからの BIOS ファームウェアのインストール
(注)
この手順は、一部のサーバでは使用できません。 他の BIOS インストール方法については、次の URL で入手できる『Cisco UCS C-Series Rack-Mount Server BIOS Upgrade Guide』を参照してください。http://www.cisco.com/en/US/docs/unified_computing/ucs/c/sw/bios/b_Upgrading_BIOS_Firmware.html。
はじめる前に手順
CIMC CLI に、admin 権限を持つユーザとしてログインします。
インストールする BIOS バージョンに合った CIMC ファームウェアを、インストールした CIMC ファームウェアのアクティブ化に従って、アクティブ化します。
サーバの電源を切ります。
(注)
アップデートがすでに処理中であるときにアップデートを開始すると、どちらのアップデートも失敗します。
コマンドまたはアクション 目的 ステップ 1 Server# scope cimc CIMC コマンド モードを開始します。
ステップ 2 Server /cimc # scope firmware ファームウェア コマンド モードを開始します。
ステップ 3 Server /cimc/firmware # show detail 使用可能なファームウェア イメージおよびステータスを表示します。
ステップ 4 [Current FW Version] フィールドに表示されるファームウェア バージョンが、インストールする BIOS ファームウェア バージョンと一致するかどうか確認します。 重要:CIMC ファームウェア バージョンが一致しない場合は、この手順を続行する前に CIMC ファームウェアをアクティブ化します。そうしないとサーバがブートしません。 詳細については、『インストールした CIMC ファームウェアのアクティブ化』を参照してください。
ステップ 5 Server /cimc/firmware # top サーバのルート レベルに戻ります。
ステップ 6 Server# scope bios BIOS コマンド モードを開始します。
ステップ 7 Server /bios # update protocol 使用されるプロトコルを指定します。 TFTP、FTP、SFTP、SCP、または HTTP が使用できます。
ステップ 8 Server /bios # update IP Address リモート サーバの IP アドレスまたはホスト名を指定します。
ステップ 9 Server /bios # update path リモート サーバ上の BIOS ファームウェア ファイルへのファイル パスを指定します。
次に、BIOS ファームウェアを CIMC ソフトウェア リリース 1.4(3j) に更新する例を示します。
Server# scope cimc Server /cimc # scope firmware Server /cimc/firmware # show detail Firmware Image Information: Update Stage: NONE Update Progress: 100 Current FW Version: 1.4(3j) FW Image 1 Version: 1.4(3j) FW Image 1 State: RUNNING ACTIVATED FW Image 2 Version: 1.3(3a) FW Image 2 State: BACKUP INACTIVATED Boot-loader Version: 1.4(3.21).18 Server /cimc/firmware # top Server # scope bios Server /bios # update ftp 192.0.20.34 //upgrade_bios_files/C260-BIOS-1-4-3j-0.CAP <CR> Press Enter key Firmware update has started. Please check the status using "show detail" Server /bios #