Cisco N9396Y12C-SE1 NX-OS モード スイッチ ハードウェア設置ガイド
Is this helpful?
Thank you for your feedback. Your response has been recorded.
AI responses are currently only available to logged in users.Log in
Important. Results generated by AI. Before using results, verify accuracy and completeness.
Only ask questions about this document. To ask questions about this product as a whole, go to Technical Documentation .
Suggestions
Sorry, we couldn't generate a response for this query.
Launch error Something went wrong. Please try again.
Table of contents
Updated: January 22, 2026
スイッチの FRU を交換し、再度挿入する方法。
実行時にファンを交換する方法。
スイッチから電源モジュールを取り外す手順。
SFP および SFP+ モジュールの取り付けと取り外しの手順。
OSFP および QSFP モジュールの取り付けおよび取り外しの手順。
光ネットワーク ケーブルの接続の手順。
トランシーバ モジュールを取り外す手順。
(Requires a Cisco Service Contract)
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.