INDEX
数字
10 ギガビット イーサネット インターフェイス
変更 6-8
A
AAA アカウンティング
設定 7-35
AAA に基づく管理システム 2-28, 7-2
ACL
IP ACL も参照 9-1
代行受信 5-29
alerts 15-5
AppNav
AppNav クラスタ 4-2
AppNav コントローラ 4-2
AppNav コントローラ インターフェイス モジュール 4-4
AppNav コントローラ グループ 4-2
appnav-controller 代行受信 5-59
WAAS ノード 4-2
WAAS ノード グループ 4-2
WAAS ノード グループの設定 4-46
WAAS ノードのクラスタの設定 4-47
WAAS ノードの設定 4-45
インターフェイス ウィザード 4-21
クラス マップ 4-5
クラス マップの設定 4-24
クラスタ ウィザード 4-17
クラスタの設定 4-39
クラスタのモニタリング 4-53
コントローラの設定 4-41
サービス コンテキスト 4-2
接続統計情報 4-58
接続トレース 4-57
設定 4-1, 4-13
デバイスの追加および削除 4-48
導入モデル 4-3
ポリシー 4-5, 4-6
ポリシー ルールの設定 4-31
AppNav-XE
Central Manager への証明書の再インポート 10-38
インターフェイスの WAAS サービス挿入の有効化 6-22
登録プロセス 10-31
B
BIC TCP 1-6
BMC
IPMI over LAN の有効化 10-29
IPMI SoL の有効化 10-29
ファームウェア アップデート 10-28
C
CDP
設定 6-29
cdp enable コマンド 5-43
cdp run コマンド 5-42
Central Manager。 WAAS Central Manager を参照 14-1
CIFS 11-1
SMB アクセラレータを使用 11-6
準備 11-6
CIFS アクセラレータ
有効化 12-2
Cisco Discovery Protocol。CDPを参照 6-29
Cisco Prime Network のシングル サインオンの設定 7-33
Cisco.com
ソフトウェア ファイルの入手 14-4
clear statistics all コマンド 7-27
clear statistics authentication コマンド 7-27
clear statistics windows-domain コマンド 7-27
CLI ユーザ
作成 8-4
cms database backup コマンド 14-11
cms database restore コマンド 14-12
CMS データベース
バックアップおよび復元の手順 14-11
copy disk ftp コマンド 14-12
Core WAE、定義 1-9
D
debug コマンド 15-74
DHCP
インターフェイスの設定 6-18
インターフェイスレベル 2-9
自動登録 2-8
DHCP サーバ
自動登録の要件 2-8
DNS、設定 6-30
DRE 設定
設定 12-7
DRE、定義 1-6
DSCP 12-90
グローバルなデフォルト 12-96
E
Edge WAE、定義 1-9
enable コマンド 7-15
EPM アクセラレータ
有効化 12-2
EtherChannel
設定 6-13
G
GRE カプセル化 5-15, 5-16
GRE トンネル、ルータ上での設定 5-33
GRE パケット転送 5-16
H
HTTP アクセラレータ
HTTPS 設定 12-7
設定 12-7
有効化 12-2
I
ICA アクセラレータ
ICA over SSL の設定 12-32
設定 12-30
IP ACL
WAE 上 2-26
アプリケーションとの関連付け 9-6
インターフェイスへの適用 9-7
概要 9-1
削除 9-7
条件、変更または削除 9-6
条件の追加 9-3
新規作成 9-3
設定に関する制約 9-3
ルータ上 2-26
ip wccp redirect-list コマンド 5-10
ip wccp コマンド 5-10
ip web-cache redirect コマンド 5-10
IP アクセス コントロール リスト。IP ACL を参照 9-1
IP アドレス
固定 2-10
複数、1 つのインターフェイスでの設定 6-7
IP ルート
設定 6-28
IPMI over LAN
SoL の有効化 10-29
定義 10-27
有効化 10-29
L
LDAP サーバ署名
Microsoft サーバでの設定 7-25
WAE での設定 7-26
WAE での無効化 7-27
概要 7-25
LZ 圧縮、定義 1-6
M
MAPI アクセラレータ
設定 12-11
有効化 12-2
Maximum Segment Size' 12-100
message of the day 設定
設定 7-10
MIB
サポートされる 16-5
N
NAM 13-1
NAS アプライアンス 1-21
NAT アドレス 10-2
NAT 設定 10-2
NetBIOS 10-2
NetFlow v9 15-59
NetFlow v9 の無効化 15-60
NetQoS のモニタリング 15-57
Network Time Protocol(ネットワーク タイム プロトコル)。 10-5
NFS アクセラレータ
有効化 12-2
NTP、設定 10-5
P
Passthrough 処理 12-88
PBR、定義 1-23
R
RADIUS
サーバの設定 7-12
データベース 7-2
デフォルト設定 7-4
認証の概要 7-12
RAID 1-24
Receive Buffer Size' 12-100
S
SACK、定義 1-6
Send Buffer Size' 12-100
Send TCP Keepalive' 12-99
set ip next-hop verify-availability コマンド 5-43
show cdp neighbors コマンド 5-42
show command ユーティリティ
トラブルシューティング用 15-75
show version コマンド 14-23
SMB アクセラレータ
設定 11-6
SNMP 1-24
SNMP エージェントの有効化 16-13
カスタム トラップの定義 16-17
グループ設定 16-23
コミュニティ設定 16-21
サポートされる MIB 16-5
サポートされるバージョン 16-3
資産タグ設定 16-26
準備 16-14
セキュリティ モデルおよびセキュリティ レベル 16-4
設定プロセス 16-13
トラップ ソース設定 16-27
トラップの有効化 16-15
ビュー設定 16-22
ホスト設定 16-20
マネージャ
作成 16-3
モニタリング 16-2
ユーザ設定 16-24
有効化 16-15
連絡先設定 16-26
SSL
設定 12-33
T
TACACS+
データベース 7-2
デフォルト設定 7-4
有効化パスワードの属性 7-15
TACACS+ サーバ
設定 7-14
TACACS+認証および許可、概要 7-14
TCP
再送信タイマー 6-27
スロー スタート 6-27
接続の表示 15-49
パラメータ設定 6-25
輻輳ウィンドウ 6-27
明示的輻輳通知 6-26
TCP の初期ウィンドウ サイズ、定義 1-5
TCP 無差別モード サービス
概要 2-25
tcpdump コマンド 15-74
Telnet サービス
有効化 7-9
tethereal コマンド 15-74
TFO
定義 1-5
TFO and LZ compression 処理 12-89
TFO only 処理 12-88
TFO with DRE(アダプティブ キャッシュ)処理 12-89
TFO with DRE(双方向キャッシュ)処理 12-89
TFO with DRE(単方向キャッシュ)処理 12-89
TFO 機能 1-5
BIC TCP 1-6
TCP の初期ウィンドウ サイズの最大化 1-5
圧縮 1-6
ウィンドウの拡大縮小 1-5
選択的受信確認 1-6
バッファリングの強化 1-6
TFO 適応バッファリング 12-101
traceroute 15-75
track コマンド 5-44
U
Unicode サポート 2-11
UTC オフセット 10-8
GMT オフセットも参照 10-8
V
VLAN ID チェック 5-48
VLAN のサポート 5-47
vWAAS
仮想インターフェイスの設定 6-18
W
WAAS
インターフェイス 1-10
利点 1-20
WAAS TCP Traceroute 15-75
WAAS Central Manager
アップグレード 14-6
バックアップ 14-11
復元 14-11
WAAS Central Manager GUI
アクセス 1-11
コンポーネント 1-13
タスクバー アイコン 1-16
定義 1-10
WAAS CLI、定義 1-19
WAAS Express
Central Manager 証明書のインポート 10-35
Central Manager への証明書の再インポート 10-38
Central Manager への登録 10-37
HTTP セキュア サーバの有効化 10-36
NTP サーバの設定 10-37
インターフェイスの最適化の設定 6-20
デバイス証明書の設定 10-35
登録プロセス 10-30
ユーザの設定 10-34
ライセンスのインストール 10-37
WAAS インターフェイス
CLI 1-19
WAAS Central Manager GUI 1-10
WAAS サービス、定義 1-3
WAAS ネットワーク
IOS との相互運用性 2-11
トラフィック リダイレクション方式 2-19
ネットワークの計画 2-1
WAE デバイス
サポート対象 2-11
制御されたシャットダウン 14-39
設定プロパティの変更 10-1
バックアップ 14-13
復元 14-13
WAE パケット返信 5-15
WAFS。CIFS を参照 11-1
WCCP
Cisco Express Forwarding(CEF) 5-16
GRE パケット返信 5-31
SC 上での代行受信の設定 5-23
WAE 上での代行受信の設定 5-17
シャット ダウン 5-27
定義 1-22, 5-3, 5-11
WCCP に基づくルーティング
設定上のガイドライン 5-4
長所と短所 2-21
ルータの高度な設定 5-7
Web アプリケーション フィルタ
設定 10-23
Web ブラウザのサポート 2-11
Windows ドメイン サーバ設定 7-18
Windows 認証
Central Manager の設定 7-17
Windows ネーム サービス 6-31
Windows プリント アクセラレータ、定義 1-9
あ
アカウント
削除 8-6
作成 8-4
作成プロセス 8-2
種類 8-1
表示 8-8
ローカル CLI 8-2
ロールに基づく 8-1
アクセラレーション
TCP 設定 12-99
TCP 適応バッファリング設定 12-101
機能 1-7
定義 1-7, 12-1
アクセラレータ
有効化 12-2
アクセラレータしきい値 12-93
アクティブ化、デバイスの 14-37
圧縮、定義 1-6
アップグレード
WAAS Central Manager デバイス 14-6
デバイス グループ 14-8
プロセス 14-1
アプリケーション
モニタリング 12-96, 15-2
アプリケーション アクセラレーション
定義 1-7, 12-1
有効化 12-2
アプリケーション ポリシー
位置 12-97
作成 12-86
作成プロセス 12-84
準備作業 12-85
デフォルトの復元 12-95
アプリケーション リスト、表示 12-94
アプリケーション定義
作成 12-85
アプリケーション分類子
一致条件 12-91
作成 12-86
復元 12-95
アラーム
デバイス報告 15-5
アラーム パネル
ウィンドウ 15-3
アラーム過負荷検出、有効化 10-25
暗号化
セキュア ストアの有効化 10-10
ディスク 14-34
い
イーサネット インターフェイス設定の変更 6-8
移行、データ 2-30
位置
削除 3-11
作成 3-11
定義 3-10
位置、アプリケーション ポリシー 12-97
位置ツリー
表示 3-12
一致条件、作成 12-91
印刷サービス
定義 1-9
インターフェイス
AppNav-XE サービス挿入の有効化 6-22
DHCP 用の手動設定 6-18
WAAS Express の最適化 6-20
インライン 5-45
仮想の設定 6-18
設定 6-1
インターフェイス モジュール インライン モード 5-45
インターフェイスレベルの DHCP
説明 2-10
インテリジェントなメッセージ予測 1-7
インライン ネットワーク アダプタ カード 5-45
インライン モード 5-45
IP アドレスの設定 5-55
VLAN ID チェック 5-48
VLAN 設定 5-56
インターフェイス設定 5-49
シリアル クラスタリング 5-57
インライン モードでのクラスタリング 5-57
インライン モードでのシリアル クラスタリング 5-57
う
ウィンドウ 15-5, 15-7, 15-9
ウィンドウ「Device Dashboard ウィンドウ」を参照 15-9
ウィンドウの拡大縮小、定義 1-5
え
エンティティ
ドメインへの追加 8-15
お
統計情報、収集 12-86
か
カーネル デバッガ
有効化 15-72
回線コンソール キャリア検出
設定 7-11
仮想インターフェイス
変更 6-18
監査証跡ログ
表示 7-37, 15-71
完全最適化(アダプティブ キャッシュ)処理 12-89
完全最適化(双方向キャッシュ)処理 12-89
完全最適化(単方向キャッシュ)処理 12-89
管理 IP アドレス 10-2
管理ログイン認証フェールオーバー 7-28
管理ログインの認証および許可
RADIUS の概要 7-12
TACACS+ の概要 7-14
WAE 用 7-2
Windows ドメインの概要 7-17
デフォルト 7-4
ローカル データベースの説明 7-6
き
ギガビット イーサネット インターフェイス
変更 6-8
起動フラグ 14-24
強制、グループ設定の 3-8
許可
機能のデフォルト値 7-4
く
グループユーザ グループの表示 8-18
け
欠落、ディスクに基づくソフトウェアの
復旧 14-25
簡易ネットワーク管理プロトコル「SNMP」を参照 16-2
現在のソフトウェア バージョン
決定 14-3
こ
高速オフライン検出
設定 10-24
定義 10-25
広帯域幅 WAN リンク 2-8
固定 IP アドレス 2-10
固定 IP ルート
設定 6-28
壊れているシステム イメージ
復旧 14-21
さ
サービス コンテキスト、AppNav 4-2
サービス パスワード
設定 5-10
再起動、デバイスの 14-38
再送信時間倍率
定義 6-27
最適化
WAAS Express インターフェイスの設定 6-20
グローバル機能の有効化 12-2
サイトおよびネットワークの計画 2-4
削除
アカウント 8-6
位置 3-11
ソフトウェア ファイル 14-10
デバイス グループ 3-6
ユーザ グループ 8-20
作成
アカウント 8-4
新しいソフトウェア ファイル 14-4
アプリケーション ポリシー 12-86
アプリケーション定義 12-85
アプリケーション分類子 12-86
一致条件 12-91
ローカル ユーザ 8-4
サポートされる WAVE デバイス 2-11
サポートされるハードウェア デバイス 2-11
サマリー レポート 15-48
し
時間帯
地域の略号 10-8
パラメータ設定 10-6
シスコによる Microsoft Windows Update のサポート 12-82
システム イベント ログ機能
設定 15-65
メッセージの優先順位 15-67
ログの表示 15-70
システム イメージ
復旧 14-21
システム ステータス
モニタリング 15-5
システム ソフトウェア
復旧 14-21
システム ソフトウェアのインストール 14-14
システム ソフトウェアの再インストール 14-14
システム ダッシュボード
システム規模の情報の表示 15-2
システム メッセージ ログ
使用 15-65
表示 15-70
システム設定 10-19
実行タイムアウト
設定 7-11
自動検出 1-20
自動登録
DHCP サーバの要件 2-8
シャット ダウン、WCCP の 5-27
シャドウ コピー、共有フォルダ用の 11-5
出力方式
設定 5-31
条件
変更または IP ACL からの削除 9-6
証明書
再インポート 10-38
処理
Passthrough 12-88
TFO only 12-88
TFO with DRE(アダプティブ キャッシュ) 12-89
TFO with DRE(双方向キャッシュ) 12-89
TFO with DRE(単方向キャッシュ) 12-89
TFO with LZ compression 12-89
完全最適化(アダプティブ キャッシュ) 12-89
完全最適化(双方向キャッシュ) 12-89
種類 12-88
シングル サインオン用の WAAS CM の設定 7-34
診断テスト 15-73
す
スケジューリング
レポート 15-54
スタンバイ Central Manager
プライマリへの切り替え 14-32
スタンバイ インターフェイス
設定 6-3
物理インターフェイスの割り当て 6-6
プライマリ インターフェイス 6-6
スタンバイ グループ
インターフェイス 6-3
せ
制御されたシャットダウン 14-39
セキュア シェル
設定 7-7
ホストのキー 7-8
セキュア ストア
Central Manager での有効化 10-13
WAE での有効化 10-14
キーおよびパスワードの変更 10-16
スタンバイ Central Manager での有効化 10-13
設定 10-10
無効化 10-18
セキュリティ
セキュア ストアの有効化 10-10
ディスク暗号化 14-34
接続
TCP 接続の表示 15-49
接続統計情報、AppNav 4-58
接続統計情報レポート 15-49
接続トレース 4-57
選択的受信確認 1-6
そ
総称ルーティング カプセル化 GRE カプセル化を参照してください 5-15, 5-16
ソフトウェア
復旧 14-21
ソフトウェア クロック 10-6
ソフトウェア バージョン
決定 14-3
ソフトウェア ファイル
Cisco.com からの入手 14-4
ソフトウェア ファイルの入手 14-4
ソフトウェア ライセンス 10-3
ソフトウェア リカバリ 14-14
ソフトウェアのアップグレード 14-4
複数のデバイス用 14-8
プロセス 14-1
ソフトウェアのバージョン 14-3
た
代行受信
appnav-controller 5-59
WCCP 5-11
ポリシーベース ルーティング 5-35
代行受信 ACL 5-29
ダイナミック共有
SMB アクセラレータ用に作成 11-7
ダウングレード 14-3
タスクバー アイコン 1-16
ダッシュボード
カスタマイズ 15-13
システム 15-2
デバイス 15-9
ち
チャート 15-30
カスタマイズ 15-13
設定 15-17
説明 15-18
追加 15-15
つ
追加
チャート 15-15
通知設定
レポート 10-26
て
データ移行 2-30
データ一貫性、定義 11-4
データ冗長性除去、定義 1-6
データベースのバックアップ 14-11
ディスク
モニタリング 15-51
ディスク レポート 15-51
ディスク暗号化 14-34
ディスク処理
データ キャッシュ管理の設定 14-36
ディスクに基づくソフトウェア、欠落
復旧 14-25
停電 14-21
適応バッファリング、TFO 12-101
テスト コマンド、トラブルシューティング用の 15-74
デバイス
アクティブ化 14-37
アラーム 15-5
グループ割り当ての表示 3-6
クロック設定 10-6
再起動 14-38
自動検出 1-20
情報の表示 15-7, 15-44, 15-49
デバイス グループ設定の変更 3-9
デバイス グループへの追加 3-5
トポロジ 15-48
複数のグループに割り当てる影響 3-9
複数のデバイス グループへの追加 3-7
リブート 14-38
デバイス グループ
グループ設定の強制 3-8
削除 3-6
作成 3-3
作成プロセス 3-2
重複の有効化 3-7
設定 3-4
設定の変更 3-8
設定優先の設定 3-8
定義 3-1
デバイスの追加および削除 3-5
リスト 3-7
デバイス ログ、表示 15-72
デバイス位置
削除 3-11
作成 3-11
定義 3-10
デバイス登録情報
復旧 14-25
デフォルト状態、復元 14-13
と
透過リダイレクション、ルータでの設定 5-7
動作予測とバッチ処理 1-7
登録
AppNav-XE デバイス 10-31
WAAS Express デバイス 10-30
時計
設定 10-6
処理
完全最適化(単方向キャッシュ) 12-89
トポロジ レポート 15-48
ドメイン
エンティティの追加 8-15
削除 8-17
作成 8-14
定義 8-14
表示 8-17
変更および削除 8-17
ユーザ アカウントへの割り当て 8-16
ユーザ グループへの割り当て 8-19
トラップ
SNMP の定義 16-17
イネーブル化 16-15
トラフィック統計情報の収集、有効化 12-86
トラフィック統計レポート 15-2
チャートの説明 15-18
トラブルシューティング
Central Manager 診断テストを使用した 15-73
CLI コマンド 15-74
show command ユーティリティを使用した 15-75
TCPdump を使用した 15-74
Tethereal を使用した 15-74
WAAS TCP Traceroute を使用した 15-75
トランザクション ログ機能 15-68
設定 15-68
ログ形式 B-1
トリガー
SNMP の定義 16-17
に
認証
機能のデフォルト値 7-4
認証サーバ
設定 7-12, 7-14
認証データベース、種類 7-2
ね
ネットワーク
情報の表示 15-2
ネットワーク トラフィック アナライザ ツール 15-74
ネットワーク解析モジュールの統合 13-1
は
ハードウェア クロック 10-6
パケット転送方式 5-15
レイヤ 2 リダイレクション 5-17
レイヤ 3 GRE 5-16
パケット返信 5-15
パスワード
アカウントの変更 8-6, 8-7
管理者の復旧 14-23
バックアップ
WAAS Central Manager 14-11
WAE デバイス 14-13
バックアップおよび復元
CMS データベース 14-11
バッファリングの強化 1-6
バナー
設定 7-10
汎用 GRE 出力方式 5-31
ひ
ビデオ アクセラレータ
有効化 12-2
表示
アプリケーション リスト 12-94
分類子レポート 12-76, 12-95
ポリシー レポート 12-94
ロール設定 8-13
ふ
ファイル サービス
SMB 設定プロセス 11-6
機能 1-9
準備 11-6
定義 1-8
フェールオーバー、管理ログイン認証 7-28
復元
WAAS Central Manager 14-11
WAE デバイス 14-13
WAE をデフォルト状態に 14-13
アプリケーション ポリシー 12-95
アプリケーション分類子 12-95
複数の IP アドレス
1 つのインターフェイスでの設定 6-7
輻輳通知、定義 6-27
復旧
システム ソフトウェア 14-21
ディスクに基づくソフトウェアの欠落からの 14-25
デバイス登録情報 14-25
紛失した管理者パスワード 14-23
復旧用システム イメージ 14-21
ブラウザのサポート 2-11
フラッシュ メモリ
壊れた 14-21
プリント アクセラレータ 1-9
フロー モニタリング
設定 15-57
紛失した管理者パスワード
復旧 14-23
分類子、作成 12-86
分類子レポート、表示 12-76, 12-95
ほ
ポート
139
バイパス 2-7
ポート チャネル インターフェイス
設定 6-13
物理インターフェイスの割り当て 6-16
ロード バランシング 6-17
ポリシー レポート、表示 12-94
ポリシーベース ルーティング
概要 2-22
代行受信の設定 5-35
定義 1-23
ネクストホップが使用できるかどうかの確認 5-42
め
明示的輻輳通知
定義 6-26
メッセージ ログ
表示 15-70
メッセージ署名サーバ データベース 11-7
も
モニタリング
NetQoS のフロー 15-57
SNMP 16-2
アプリケーション 12-96, 15-2
カスタム レポートの作成 15-52
システム ステータス 15-5
チャートの設定 15-17
チャートの説明 15-18
定義済みレポート 15-43
ディスク情報 15-51
リソース使用率 15-50
ゆ
ユーザ アカウント
監査証跡
ログ表示 15-71
監査証跡ログ
表示 7-37
管理 8-7
削除 8-6
作成 8-4
作成プロセス 8-2
ドメイン 8-14
ドメイン エンティティの追加 8-15
ドメインの削除 8-17
ドメインの表示 8-17
ドメインへの割り当て 8-16
パスワードの変更 8-6, 8-7
表示 8-8
変更および削除 8-6
ロール
作成 8-10
表示 8-13
変更および削除 8-13
割り当て 8-12
ユーザ グループ
削除 8-20
作成 8-18
定義 8-18
ドメインへの割り当て 8-19
表示 8-21
ロールの割り当て 8-19
ユーザ認証ログイン認証を参照 2-27, 7-1
有効化
SNMP 16-15
SNMP エージェント 16-13
最適化およびアクセラレータ 12-2
トラフィック統計情報の収集 12-86
プロトコル チェーン 12-52
優先順位 15-67
よ
要求リダイレクション方式 5-1
ら
ライセンス 10-3
り
リソース使用率レポート 15-50
リダイレクション方式 5-1
リブート、デバイスの 14-38
リモート ログイン
アクセスの制御 7-7
る
ルータ
WCCP 透過リダイレクションの設定 5-7
れ
レイヤ 2 リダイレクション 5-17
レポート
E メール サーバ設定の構成 10-26
カスタマイズ 15-13
カスタムの作成 15-52
カスタムの表示 15-54
管理 15-52
スケジューリング 15-54
接続統計情報 15-49
定義済み 15-43
トポロジ 15-48
編集 15-54
リソース使用率 15-50
レポートの E メール サーバ設定 10-26
ろ
ローカル CLI アカウント、定義 8-2
ローカル ユーザ、作成 8-4
ロード バランシング 1-23, 5-12, 6-17
ロール
サービスへの読み取りアクセス 8-10
削除 8-13
作成および管理 8-10
設定の表示 8-13
定義 8-9
表示 8-13
変更および削除 8-13
ユーザ アカウントへの割り当て 8-12
ユーザ グループへの割り当て 8-19
ロールに基づくアカウント
定義 8-1, 8-3
ロールの
削除 8-13
ログイン アクセス
制御 7-7
ログイン認証
定義 2-27, 7-1
ログ機能
監査証跡ログの表示 15-71
システム メッセージの表示 15-70
システム ログ機能の設定 15-65
デバイス ログの表示 15-72
トランザクション ログ機能 15-68
トランザクション ログ形式 B-1
メッセージの優先順位 15-67
わ
割り当て
デバイス グループへのデバイスの 3-5
複数のデバイス グループへのデバイスの 3-7
INDEX
数字
10 ギガビット イーサネット インターフェイス
変更 6-8
A
AAA アカウンティング
設定 7-35
AAA に基づく管理システム 2-28, 7-2
ACL
IP ACL も参照 9-1
代行受信 5-29
alerts 15-5
AppNav
AppNav クラスタ 4-2
AppNav コントローラ 4-2
AppNav コントローラ インターフェイス モジュール 4-4
AppNav コントローラ グループ 4-2
appnav-controller 代行受信 5-59
WAAS ノード 4-2
WAAS ノード グループ 4-2
WAAS ノード グループの設定 4-46
WAAS ノードのクラスタの設定 4-47
WAAS ノードの設定 4-45
インターフェイス ウィザード 4-21
クラス マップ 4-5
クラス マップの設定 4-24
クラスタ ウィザード 4-17
クラスタの設定 4-39
クラスタのモニタリング 4-53
コントローラの設定 4-41
サービス コンテキスト 4-2
接続統計情報 4-58
接続トレース 4-57
設定 4-1, 4-13
デバイスの追加および削除 4-48
導入モデル 4-3
ポリシー 4-5, 4-6
ポリシー ルールの設定 4-31
AppNav-XE
Central Manager への証明書の再インポート 10-38
インターフェイスの WAAS サービス挿入の有効化 6-22
登録プロセス 10-31
B
BIC TCP 1-6
BMC
IPMI over LAN の有効化 10-29
IPMI SoL の有効化 10-29
ファームウェア アップデート 10-28
C
CDP
設定 6-29
cdp enable コマンド 5-43
cdp run コマンド 5-42
Central Manager。 WAAS Central Manager を参照 14-1
CIFS 11-1
SMB アクセラレータを使用 11-6
準備 11-6
CIFS アクセラレータ
有効化 12-2
Cisco Discovery Protocol。CDPを参照 6-29
Cisco Prime Network のシングル サインオンの設定 7-33
Cisco.com
ソフトウェア ファイルの入手 14-4
clear statistics all コマンド 7-27
clear statistics authentication コマンド 7-27
clear statistics windows-domain コマンド 7-27
CLI ユーザ
作成 8-4
cms database backup コマンド 14-11
cms database restore コマンド 14-12
CMS データベース
バックアップおよび復元の手順 14-11
copy disk ftp コマンド 14-12
Core WAE、定義 1-9
D
debug コマンド 15-74
DHCP
インターフェイスの設定 6-18
インターフェイスレベル 2-9
自動登録 2-8
DHCP サーバ
自動登録の要件 2-8
DNS、設定 6-30
DRE 設定
設定 12-7
DRE、定義 1-6
DSCP 12-90
グローバルなデフォルト 12-96
E
Edge WAE、定義 1-9
enable コマンド 7-15
EPM アクセラレータ
有効化 12-2
EtherChannel
設定 6-13
G
GRE カプセル化 5-15, 5-16
GRE トンネル、ルータ上での設定 5-33
GRE パケット転送 5-16
H
HTTP アクセラレータ
HTTPS 設定 12-7
設定 12-7
有効化 12-2
I
ICA アクセラレータ
ICA over SSL の設定 12-32
設定 12-30
IP ACL
WAE 上 2-26
アプリケーションとの関連付け 9-6
インターフェイスへの適用 9-7
概要 9-1
削除 9-7
条件、変更または削除 9-6
条件の追加 9-3
新規作成 9-3
設定に関する制約 9-3
ルータ上 2-26
ip wccp redirect-list コマンド 5-10
ip wccp コマンド 5-10
ip web-cache redirect コマンド 5-10
IP アクセス コントロール リスト。IP ACL を参照 9-1
IP アドレス
固定 2-10
複数、1 つのインターフェイスでの設定 6-7
IP ルート
設定 6-28
IPMI over LAN
SoL の有効化 10-29
定義 10-27
有効化 10-29
L
LDAP サーバ署名
Microsoft サーバでの設定 7-25
WAE での設定 7-26
WAE での無効化 7-27
概要 7-25
LZ 圧縮、定義 1-6
M
MAPI アクセラレータ
設定 12-11
有効化 12-2
Maximum Segment Size' 12-100
message of the day 設定
設定 7-10
MIB
サポートされる 16-5
N
NAM 13-1
NAS アプライアンス 1-21
NAT アドレス 10-2
NAT 設定 10-2
NetBIOS 10-2
NetFlow v9 15-59
NetFlow v9 の無効化 15-60
NetQoS のモニタリング 15-57
Network Time Protocol(ネットワーク タイム プロトコル)。 10-5
NFS アクセラレータ
有効化 12-2
NTP、設定 10-5
P
Passthrough 処理 12-88
PBR、定義 1-23
R
RADIUS
サーバの設定 7-12
データベース 7-2
デフォルト設定 7-4
認証の概要 7-12
RAID 1-24
Receive Buffer Size' 12-100
S
SACK、定義 1-6
Send Buffer Size' 12-100
Send TCP Keepalive' 12-99
set ip next-hop verify-availability コマンド 5-43
show cdp neighbors コマンド 5-42
show command ユーティリティ
トラブルシューティング用 15-75
show version コマンド 14-23
SMB アクセラレータ
設定 11-6
SNMP 1-24
SNMP エージェントの有効化 16-13
カスタム トラップの定義 16-17
グループ設定 16-23
コミュニティ設定 16-21
サポートされる MIB 16-5
サポートされるバージョン 16-3
資産タグ設定 16-26
準備 16-14
セキュリティ モデルおよびセキュリティ レベル 16-4
設定プロセス 16-13
トラップ ソース設定 16-27
トラップの有効化 16-15
ビュー設定 16-22
ホスト設定 16-20
マネージャ
作成 16-3
モニタリング 16-2
ユーザ設定 16-24
有効化 16-15
連絡先設定 16-26
SSL
設定 12-33
T
TACACS+
データベース 7-2
デフォルト設定 7-4
有効化パスワードの属性 7-15
TACACS+ サーバ
設定 7-14
TACACS+認証および許可、概要 7-14
TCP
再送信タイマー 6-27
スロー スタート 6-27
接続の表示 15-49
パラメータ設定 6-25
輻輳ウィンドウ 6-27
明示的輻輳通知 6-26
TCP の初期ウィンドウ サイズ、定義 1-5
TCP 無差別モード サービス
概要 2-25
tcpdump コマンド 15-74
Telnet サービス
有効化 7-9
tethereal コマンド 15-74
TFO
定義 1-5
TFO and LZ compression 処理 12-89
TFO only 処理 12-88
TFO with DRE(アダプティブ キャッシュ)処理 12-89
TFO with DRE(双方向キャッシュ)処理 12-89
TFO with DRE(単方向キャッシュ)処理 12-89
TFO 機能 1-5
BIC TCP 1-6
TCP の初期ウィンドウ サイズの最大化 1-5
圧縮 1-6
ウィンドウの拡大縮小 1-5
選択的受信確認 1-6
バッファリングの強化 1-6
TFO 適応バッファリング 12-101
traceroute 15-75
track コマンド 5-44
U
Unicode サポート 2-11
UTC オフセット 10-8
GMT オフセットも参照 10-8
V
VLAN ID チェック 5-48
VLAN のサポート 5-47
vWAAS
仮想インターフェイスの設定 6-18
W
WAAS
インターフェイス 1-10
利点 1-20
WAAS TCP Traceroute 15-75
WAAS Central Manager
アップグレード 14-6
バックアップ 14-11
復元 14-11
WAAS Central Manager GUI
アクセス 1-11
コンポーネント 1-13
タスクバー アイコン 1-16
定義 1-10
WAAS CLI、定義 1-19
WAAS Express
Central Manager 証明書のインポート 10-35
Central Manager への証明書の再インポート 10-38
Central Manager への登録 10-37
HTTP セキュア サーバの有効化 10-36
NTP サーバの設定 10-37
インターフェイスの最適化の設定 6-20
デバイス証明書の設定 10-35
登録プロセス 10-30
ユーザの設定 10-34
ライセンスのインストール 10-37
WAAS インターフェイス
CLI 1-19
WAAS Central Manager GUI 1-10
WAAS サービス、定義 1-3
WAAS ネットワーク
IOS との相互運用性 2-11
トラフィック リダイレクション方式 2-19
ネットワークの計画 2-1
WAE デバイス
サポート対象 2-11
制御されたシャットダウン 14-39
設定プロパティの変更 10-1
バックアップ 14-13
復元 14-13
WAE パケット返信 5-15
WAFS。CIFS を参照 11-1
WCCP
Cisco Express Forwarding(CEF) 5-16
GRE パケット返信 5-31
SC 上での代行受信の設定 5-23
WAE 上での代行受信の設定 5-17
シャット ダウン 5-27
定義 1-22, 5-3, 5-11
WCCP に基づくルーティング
設定上のガイドライン 5-4
長所と短所 2-21
ルータの高度な設定 5-7
Web アプリケーション フィルタ
設定 10-23
Web ブラウザのサポート 2-11
Windows ドメイン サーバ設定 7-18
Windows 認証
Central Manager の設定 7-17
Windows ネーム サービス 6-31
Windows プリント アクセラレータ、定義 1-9
あ
アカウント
削除 8-6
作成 8-4
作成プロセス 8-2
種類 8-1
表示 8-8
ローカル CLI 8-2
ロールに基づく 8-1
アクセラレーション
TCP 設定 12-99
TCP 適応バッファリング設定 12-101
機能 1-7
定義 1-7, 12-1
アクセラレータ
有効化 12-2
アクセラレータしきい値 12-93
アクティブ化、デバイスの 14-37
圧縮、定義 1-6
アップグレード
WAAS Central Manager デバイス 14-6
デバイス グループ 14-8
プロセス 14-1
アプリケーション
モニタリング 12-96, 15-2
アプリケーション アクセラレーション
定義 1-7, 12-1
有効化 12-2
アプリケーション ポリシー
位置 12-97
作成 12-86
作成プロセス 12-84
準備作業 12-85
デフォルトの復元 12-95
アプリケーション リスト、表示 12-94
アプリケーション定義
作成 12-85
アプリケーション分類子
一致条件 12-91
作成 12-86
復元 12-95
アラーム
デバイス報告 15-5
アラーム パネル
ウィンドウ 15-3
アラーム過負荷検出、有効化 10-25
暗号化
セキュア ストアの有効化 10-10
ディスク 14-34
い
イーサネット インターフェイス設定の変更 6-8
移行、データ 2-30
位置
削除 3-11
作成 3-11
定義 3-10
位置、アプリケーション ポリシー 12-97
位置ツリー
表示 3-12
一致条件、作成 12-91
印刷サービス
定義 1-9
インターフェイス
AppNav-XE サービス挿入の有効化 6-22
DHCP 用の手動設定 6-18
WAAS Express の最適化 6-20
インライン 5-45
仮想の設定 6-18
設定 6-1
インターフェイス モジュール インライン モード 5-45
インターフェイスレベルの DHCP
説明 2-10
インテリジェントなメッセージ予測 1-7
インライン ネットワーク アダプタ カード 5-45
インライン モード 5-45
IP アドレスの設定 5-55
VLAN ID チェック 5-48
VLAN 設定 5-56
インターフェイス設定 5-49
シリアル クラスタリング 5-57
インライン モードでのクラスタリング 5-57
インライン モードでのシリアル クラスタリング 5-57
う
ウィンドウ 15-5, 15-7, 15-9
ウィンドウ「Device Dashboard ウィンドウ」を参照 15-9
ウィンドウの拡大縮小、定義 1-5
え
エンティティ
ドメインへの追加 8-15
お
統計情報、収集 12-86
か
カーネル デバッガ
有効化 15-72
回線コンソール キャリア検出
設定 7-11
仮想インターフェイス
変更 6-18
監査証跡ログ
表示 7-37, 15-71
完全最適化(アダプティブ キャッシュ)処理 12-89
完全最適化(双方向キャッシュ)処理 12-89
完全最適化(単方向キャッシュ)処理 12-89
管理 IP アドレス 10-2
管理ログイン認証フェールオーバー 7-28
管理ログインの認証および許可
RADIUS の概要 7-12
TACACS+ の概要 7-14
WAE 用 7-2
Windows ドメインの概要 7-17
デフォルト 7-4
ローカル データベースの説明 7-6
き
ギガビット イーサネット インターフェイス
変更 6-8
起動フラグ 14-24
強制、グループ設定の 3-8
許可
機能のデフォルト値 7-4
く
グループユーザ グループの表示 8-18
け
欠落、ディスクに基づくソフトウェアの
復旧 14-25
簡易ネットワーク管理プロトコル「SNMP」を参照 16-2
現在のソフトウェア バージョン
決定 14-3
こ
高速オフライン検出
設定 10-24
定義 10-25
広帯域幅 WAN リンク 2-8
固定 IP アドレス 2-10
固定 IP ルート
設定 6-28
壊れているシステム イメージ
復旧 14-21
さ
サービス コンテキスト、AppNav 4-2
サービス パスワード
設定 5-10
再起動、デバイスの 14-38
再送信時間倍率
定義 6-27
最適化
WAAS Express インターフェイスの設定 6-20
グローバル機能の有効化 12-2
サイトおよびネットワークの計画 2-4
削除
アカウント 8-6
位置 3-11
ソフトウェア ファイル 14-10
デバイス グループ 3-6
ユーザ グループ 8-20
作成
アカウント 8-4
新しいソフトウェア ファイル 14-4
アプリケーション ポリシー 12-86
アプリケーション定義 12-85
アプリケーション分類子 12-86
一致条件 12-91
ローカル ユーザ 8-4
サポートされる WAVE デバイス 2-11
サポートされるハードウェア デバイス 2-11
サマリー レポート 15-48
し
時間帯
地域の略号 10-8
パラメータ設定 10-6
シスコによる Microsoft Windows Update のサポート 12-82
システム イベント ログ機能
設定 15-65
メッセージの優先順位 15-67
ログの表示 15-70
システム イメージ
復旧 14-21
システム ステータス
モニタリング 15-5
システム ソフトウェア
復旧 14-21
システム ソフトウェアのインストール 14-14
システム ソフトウェアの再インストール 14-14
システム ダッシュボード
システム規模の情報の表示 15-2
システム メッセージ ログ
使用 15-65
表示 15-70
システム設定 10-19
実行タイムアウト
設定 7-11
自動検出 1-20
自動登録
DHCP サーバの要件 2-8
シャット ダウン、WCCP の 5-27
シャドウ コピー、共有フォルダ用の 11-5
出力方式
設定 5-31
条件
変更または IP ACL からの削除 9-6
証明書
再インポート 10-38
処理
Passthrough 12-88
TFO only 12-88
TFO with DRE(アダプティブ キャッシュ) 12-89
TFO with DRE(双方向キャッシュ) 12-89
TFO with DRE(単方向キャッシュ) 12-89
TFO with LZ compression 12-89
完全最適化(アダプティブ キャッシュ) 12-89
完全最適化(双方向キャッシュ) 12-89
種類 12-88
シングル サインオン用の WAAS CM の設定 7-34
診断テスト 15-73
す
スケジューリング
レポート 15-54
スタンバイ Central Manager
プライマリへの切り替え 14-32
スタンバイ インターフェイス
設定 6-3
物理インターフェイスの割り当て 6-6
プライマリ インターフェイス 6-6
スタンバイ グループ
インターフェイス 6-3
せ
制御されたシャットダウン 14-39
セキュア シェル
設定 7-7
ホストのキー 7-8
セキュア ストア
Central Manager での有効化 10-13
WAE での有効化 10-14
キーおよびパスワードの変更 10-16
スタンバイ Central Manager での有効化 10-13
設定 10-10
無効化 10-18
セキュリティ
セキュア ストアの有効化 10-10
ディスク暗号化 14-34
接続
TCP 接続の表示 15-49
接続統計情報、AppNav 4-58
接続統計情報レポート 15-49
接続トレース 4-57
選択的受信確認 1-6
そ
総称ルーティング カプセル化 GRE カプセル化を参照してください 5-15, 5-16
ソフトウェア
復旧 14-21
ソフトウェア クロック 10-6
ソフトウェア バージョン
決定 14-3
ソフトウェア ファイル
Cisco.com からの入手 14-4
ソフトウェア ファイルの入手 14-4
ソフトウェア ライセンス 10-3
ソフトウェア リカバリ 14-14
ソフトウェアのアップグレード 14-4
複数のデバイス用 14-8
プロセス 14-1
ソフトウェアのバージョン 14-3
た
代行受信
appnav-controller 5-59
WCCP 5-11
ポリシーベース ルーティング 5-35
代行受信 ACL 5-29
ダイナミック共有
SMB アクセラレータ用に作成 11-7
ダウングレード 14-3
タスクバー アイコン 1-16
ダッシュボード
カスタマイズ 15-13
システム 15-2
デバイス 15-9
ち
チャート 15-30
カスタマイズ 15-13
設定 15-17
説明 15-18
追加 15-15
つ
追加
チャート 15-15
通知設定
レポート 10-26
て
データ移行 2-30
データ一貫性、定義 11-4
データ冗長性除去、定義 1-6
データベースのバックアップ 14-11
ディスク
モニタリング 15-51
ディスク レポート 15-51
ディスク暗号化 14-34
ディスク処理
データ キャッシュ管理の設定 14-36
ディスクに基づくソフトウェア、欠落
復旧 14-25
停電 14-21
適応バッファリング、TFO 12-101
テスト コマンド、トラブルシューティング用の 15-74
デバイス
アクティブ化 14-37
アラーム 15-5
グループ割り当ての表示 3-6
クロック設定 10-6
再起動 14-38
自動検出 1-20
情報の表示 15-7, 15-44, 15-49
デバイス グループ設定の変更 3-9
デバイス グループへの追加 3-5
トポロジ 15-48
複数のグループに割り当てる影響 3-9
複数のデバイス グループへの追加 3-7
リブート 14-38
デバイス グループ
グループ設定の強制 3-8
削除 3-6
作成 3-3
作成プロセス 3-2
重複の有効化 3-7
設定 3-4
設定の変更 3-8
設定優先の設定 3-8
定義 3-1
デバイスの追加および削除 3-5
リスト 3-7
デバイス ログ、表示 15-72
デバイス位置
削除 3-11
作成 3-11
定義 3-10
デバイス登録情報
復旧 14-25
デフォルト状態、復元 14-13
と
透過リダイレクション、ルータでの設定 5-7
動作予測とバッチ処理 1-7
登録
AppNav-XE デバイス 10-31
WAAS Express デバイス 10-30
時計
設定 10-6
処理
完全最適化(単方向キャッシュ) 12-89
トポロジ レポート 15-48
ドメイン
エンティティの追加 8-15
削除 8-17
作成 8-14
定義 8-14
表示 8-17
変更および削除 8-17
ユーザ アカウントへの割り当て 8-16
ユーザ グループへの割り当て 8-19
トラップ
SNMP の定義 16-17
イネーブル化 16-15
トラフィック統計情報の収集、有効化 12-86
トラフィック統計レポート 15-2
チャートの説明 15-18
トラブルシューティング
Central Manager 診断テストを使用した 15-73
CLI コマンド 15-74
show command ユーティリティを使用した 15-75
TCPdump を使用した 15-74
Tethereal を使用した 15-74
WAAS TCP Traceroute を使用した 15-75
トランザクション ログ機能 15-68
設定 15-68
ログ形式 B-1
トリガー
SNMP の定義 16-17
に
認証
機能のデフォルト値 7-4
認証サーバ
設定 7-12, 7-14
認証データベース、種類 7-2
ね
ネットワーク
情報の表示 15-2
ネットワーク トラフィック アナライザ ツール 15-74
ネットワーク解析モジュールの統合 13-1
は
ハードウェア クロック 10-6
パケット転送方式 5-15
レイヤ 2 リダイレクション 5-17
レイヤ 3 GRE 5-16
パケット返信 5-15
パスワード
アカウントの変更 8-6, 8-7
管理者の復旧 14-23
バックアップ
WAAS Central Manager 14-11
WAE デバイス 14-13
バックアップおよび復元
CMS データベース 14-11
バッファリングの強化 1-6
バナー
設定 7-10
汎用 GRE 出力方式 5-31
ひ
ビデオ アクセラレータ
有効化 12-2
表示
アプリケーション リスト 12-94
分類子レポート 12-76, 12-95
ポリシー レポート 12-94
ロール設定 8-13
ふ
ファイル サービス
SMB 設定プロセス 11-6
機能 1-9
準備 11-6
定義 1-8
フェールオーバー、管理ログイン認証 7-28
復元
WAAS Central Manager 14-11
WAE デバイス 14-13
WAE をデフォルト状態に 14-13
アプリケーション ポリシー 12-95
アプリケーション分類子 12-95
複数の IP アドレス
1 つのインターフェイスでの設定 6-7
輻輳通知、定義 6-27
復旧
システム ソフトウェア 14-21
ディスクに基づくソフトウェアの欠落からの 14-25
デバイス登録情報 14-25
紛失した管理者パスワード 14-23
復旧用システム イメージ 14-21
ブラウザのサポート 2-11
フラッシュ メモリ
壊れた 14-21
プリント アクセラレータ 1-9
フロー モニタリング
設定 15-57
紛失した管理者パスワード
復旧 14-23
分類子、作成 12-86
分類子レポート、表示 12-76, 12-95
ほ
ポート
139
バイパス 2-7
ポート チャネル インターフェイス
設定 6-13
物理インターフェイスの割り当て 6-16
ロード バランシング 6-17
ポリシー レポート、表示 12-94
ポリシーベース ルーティング
概要 2-22
代行受信の設定 5-35
定義 1-23
ネクストホップが使用できるかどうかの確認 5-42
め
明示的輻輳通知
定義 6-26
メッセージ ログ
表示 15-70
メッセージ署名サーバ データベース 11-7
も
モニタリング
NetQoS のフロー 15-57
SNMP 16-2
アプリケーション 12-96, 15-2
カスタム レポートの作成 15-52
システム ステータス 15-5
チャートの設定 15-17
チャートの説明 15-18
定義済みレポート 15-43
ディスク情報 15-51
リソース使用率 15-50
ゆ
ユーザ アカウント
監査証跡
ログ表示 15-71
監査証跡ログ
表示 7-37
管理 8-7
削除 8-6
作成 8-4
作成プロセス 8-2
ドメイン 8-14
ドメイン エンティティの追加 8-15
ドメインの削除 8-17
ドメインの表示 8-17
ドメインへの割り当て 8-16
パスワードの変更 8-6, 8-7
表示 8-8
変更および削除 8-6
ロール
作成 8-10
表示 8-13
変更および削除 8-13
割り当て 8-12
ユーザ グループ
削除 8-20
作成 8-18
定義 8-18
ドメインへの割り当て 8-19
表示 8-21
ロールの割り当て 8-19
ユーザ認証ログイン認証を参照 2-27, 7-1
有効化
SNMP 16-15
SNMP エージェント 16-13
最適化およびアクセラレータ 12-2
トラフィック統計情報の収集 12-86
プロトコル チェーン 12-52
優先順位 15-67
よ
要求リダイレクション方式 5-1
ら
ライセンス 10-3
り
リソース使用率レポート 15-50
リダイレクション方式 5-1
リブート、デバイスの 14-38
リモート ログイン
アクセスの制御 7-7
る
ルータ
WCCP 透過リダイレクションの設定 5-7
れ
レイヤ 2 リダイレクション 5-17
レポート
E メール サーバ設定の構成 10-26
カスタマイズ 15-13
カスタムの作成 15-52
カスタムの表示 15-54
管理 15-52
スケジューリング 15-54
接続統計情報 15-49
定義済み 15-43
トポロジ 15-48
編集 15-54
リソース使用率 15-50
レポートの E メール サーバ設定 10-26
ろ
ローカル CLI アカウント、定義 8-2
ローカル ユーザ、作成 8-4
ロード バランシング 1-23, 5-12, 6-17
ロール
サービスへの読み取りアクセス 8-10
削除 8-13
作成および管理 8-10
設定の表示 8-13
定義 8-9
表示 8-13
変更および削除 8-13
ユーザ アカウントへの割り当て 8-12
ユーザ グループへの割り当て 8-19
ロールに基づくアカウント
定義 8-1, 8-3
ロールの
削除 8-13
ログイン アクセス
制御 7-7
ログイン認証
定義 2-27, 7-1
ログ機能
監査証跡ログの表示 15-71
システム メッセージの表示 15-70
システム ログ機能の設定 15-65
デバイス ログの表示 15-72
トランザクション ログ機能 15-68
トランザクション ログ形式 B-1
メッセージの優先順位 15-67
わ
割り当て
デバイス グループへのデバイスの 3-5
複数のデバイス グループへのデバイスの 3-7