Resolución de problemas al agregar una nueva instancia de producto de aplicación de UC en PLM a través de HCM-F

Introducción

Este documento describe los pasos generales de solución de problemas para Hosted License Manager (HLM) y Prime License Manager (PLM) al agregar una nueva instancia de producto de Unified Application a PLM a través de HCM-F. Además, realice la lista de verificación antes de abrir un caso TAC.

Prerequisites

Requirements

Cisco recomienda que tenga conocimiento sobre estos temas:

• Solución de colaboración alojada de Cisco (HCS)
• Función de mediación de colaboración alojada de Cisco (HCM-F)
• Cisco Prime License Manager (PLM)

Componentes Utilizados

La información que contiene este documento se basa en las siguientes versiones de software y hardware.

• HCM-F 10.6.2
• PLM 10.5.2

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Problema: El administrador de HCM-F no puede asignar el clúster de UC a la instancia de PLM

El trabajo de HCM-F falla con el error que se muestra en la imagen:

Para resolver este problema, se requieren registros detallados de HLM, ya que varias condiciones pueden conducir al mismo error de GUI.

Inicie sesión en HCM-F, CLI habilita el nivel de registros y recopila los registros.

Ejecute el comando:

set trace tracelevel

Ingrese el traclevel(utilice CLI "show tracelevels" para encontrar los tracelevels permitidos) :: Detallado

Introduzca el nombre del servicio :: Servicio Cisco HCS License Manager

Reproduzca el problema y recopile los registros.

file get activelog /hcs/HLM/*

Solución 1

Agregue la dirección IP del proveedor de servicios en el Editor de la aplicación Clúster. El HCM-F no se puede conectar a la aplicación UC porque falta el proveedor de servicios IP.

2016-09-21 18:25:21,659 INFO  [264674] UCAppDeploymentModeConnection: Opening secure connection to: https://null:8443/platform-services/services/DeploymentModeService?wsdl

2016-09-21 18:25:21,659 INFO  [264674] UCAppDeploymentModeConnectionPort successfully opened

2016-09-21 18:25:21,688 INFO  [264674] UCAppDeploymentModeConnection: Setting userName for SOAP connection to: ccmadmin

2016-09-21 18:25:21,688 INFO  [264674] UCAppDeploymentModeConnection: Accepting Certificate from UC Application

2016-09-21 18:25:21,688 INFO  [264674] UCAppDeploymentModeConnection.getDeploymentMode Called

2016-09-21 18:25:21,695 ERROR [264674] UCAppAPI.getDeploymentMode() CaughtException: Error writing to XMLStreamWriter.

2016-09-21 18:25:21,695 ERROR [264674] HLMClusterLicenseAgent: .null0_AssignClusterToELMRequest  Error writing to XMLStreamWriter.

2016-09-21 18:25:21,696 DEBUG [264674] hlmSDRUtil.updateJob

2016-09-21 18:25:21,750 DEBUG [264674] hlmSDRUtil.beginTransaction

 

Verificación

Para verificar, navegue hasta Administración de aplicaciones > Aplicación de clúster

Solución 2

Habilite la conectividad IP entre la aplicación HCM-F y UC en el puerto 8443.

La configuración de HCM-F está bien, pero el módulo HLM no puede abrir una conexión tcp hacia la aplicación UC. Consulte la sección Verificación para ver cómo resolver este problema más adelante

2016-09-21 18:34:33,745 INFO  [264677] UCAppDeploymentModeConnection: Opening secure connection to: https://10.48.50.72:8443/platform-services/services/DeploymentModeService?wsdl

2016-09-21 18:34:33,746 INFO  [264677] UCAppDeploymentModeConnectionPort successfully opened

2016-09-21 18:34:33,764 INFO  [264677] UCAppDeploymentModeConnection: Setting userName for SOAP connection to: ccmadmin

2016-09-21 18:34:33,764 INFO  [264677] UCAppDeploymentModeConnection: Accepting Certificate from UC Application

2016-09-21 18:34:33,764 INFO  [264677] UCAppDeploymentModeConnection.getDeploymentMode Called

Failed to connect :

2016-09-21 18:35:09,801 ERROR [264677] UCAppAPI.getDeploymentMode() CaughtException: Error writing to XMLStreamWriter.

2016-09-21 18:35:09,801 ERROR [264677] HLMClusterLicenseAgent: .null0_AssignClusterToELMRequest  Error writing to XMLStreamWriter.

2016-09-21 18:35:09,801 DEBUG [264677] hlmSDRUtil.updateJob

2016-09-21 18:35:09,856 DEBUG [264677] hlmSDRUtil.beginTransaction

2016-09-21 18:35:09,859 DEBUG [264677] hlmSDRUtilcommitTransaction

2016-09-21 18:35:09,990 INFO  [264677] AgentFSM::currentState changed from null0 to stopped

2016-09-21 18:35:09,990 INFO  [264677] Agent route no longer needed...moving it to stopped routes

2016-09-21 18:35:09,990 INFO  [264677] Route removed from context >HLM(be75ce6c-f4ca-464e-aa0f-8204f6cb1fa3)<

 Verificación

• Verifique que la aplicación de UC esté en funcionamiento.

• Verifique la conectividad entre la aplicación UC y HCM-F.

admin:utils network ping XXX.YYY.WWW.ZZZ

• Verifique que el puerto 8443 no esté bloqueado por el firewall. Recopile la captura de paquetes y verifique que el intercambio de señales TCP se haya establecido correctamente.
  

admin:utils network capture eth0 file nombre de archivo número 10000 tamaño todo puerto 8443 host ip xxx.yyy.www.zzz

donde xxx.yyy.www.zzz es el servicio de aplicaciones de UC que proporciona espacio

• Verifique que el siguiente enlace esté accesible.
  

https://UC_APP_IP_ADDRRESS:8443/platform-services/services/DeploymentModeService?wsdl

Solución 3

• Vuelva a escribir la contraseña de la aplicación UC de la plataforma para que coincida con la aplicación UC una porque HLM no puede enviar el mensaje.
  
  
• Iniciar el servicio web del administrador de la plataforma en la aplicación UC

2016-10-06 16:24:49,592 INFO  [252833] UCAppDeploymentModeConnection: Opening secure connection to: https://10.48.50.14:8443/platform-services/services/DeploymentModeService?wsdl

2016-10-06 16:24:49,592 INFO  [252833] UCAppDeploymentModeConnectionPort successfully opened

2016-10-06 16:24:49,616 INFO  [252833] UCAppDeploymentModeConnection: Setting userName for SOAP connection to: ccmadmin

2016-10-06 16:24:49,616 INFO  [252833] UCAppDeploymentModeConnection: Accepting Certificate from UC Application

2016-10-06 16:24:49,616 INFO  [252833] UCAppDeploymentModeConnection.getDeploymentMode Called

2016-10-06 16:24:51,877 ERROR [252833] UCAppAPI.getDeploymentMode() CaughtException: Could not send Message.

2016-10-06 16:24:51,878 ERROR [252833] HLMClusterLicenseAgent: .null0_AssignClusterToELMRequest  Could not send Message.

2016-10-06 16:24:51,878 DEBUG [252833] hlmSDRUtil.updateJob

2016-10-06 16:24:51,939 DEBUG [252833] hlmSDRUtil.beginTransaction

2016-10-06 16:24:51,942 DEBUG [252833] hlmSDRUtilcommitTransaction

2016-10-06 16:24:52,054 INFO  [252833] AgentFSM::currentState changed from null0 to stopped

2016-10-06 16:24:52,054 INFO  [252833] Agent route no longer needed...moving it to stopped routes

2016-10-06 16:24:52,054 INFO  [252833] Route removed from context >HLM(ad495160-864d-4b74-8aec-cc708036b5e0)<

2016-10-06 16:24:52,054 DEBUG [252833]
 

Verificación

• Verifique que el servicio Web administrativo de la plataforma se esté ejecutando en las aplicaciones de UC

Vaya a Serviciabilidad de Cisco Unified > Servicio de plataforma > Servicio web administrativo de plataforma

• Verificar las respuestas del servicio Web administrativo de la plataforma al acceder al archivo wsdl

https://UC_APP_IP_ADDRRESS:8443/platform-services/services/DeploymentModeService?wsdl

Solución 4

Póngase en contacto con el TAC de Cisco para cambiar el modo de implementación de PLM a HCS

 

2016-10-07 11:37:55,581 INFO  [238120] UCAppDeploymentModeConnection: Opening secure connection to: https://10.48.52.10:8443/platform-services/services/DeploymentModeService?wsdl

2016-10-07 11:37:55,581 INFO  [238120] UCAppDeploymentModeConnectionPort successfully opened

2016-10-07 11:37:55,608 INFO  [238120] UCAppDeploymentModeConnection: Setting userName for SOAP connection to: ccmadmin

2016-10-07 11:37:55,608 INFO  [238120] UCAppDeploymentModeConnection: Accepting Certificate from UC Application

2016-10-07 11:37:55,608 INFO  [238120] UCAppDeploymentModeConnection.getDeploymentMode Called

2016-10-07 11:37:55,980 DEBUG [238120] UCAppDeploymentModeConnection.getDeploymentMode Response Recieved

2016-10-07 11:37:55,980 INFO  [238120] UCAppDeploymentModeConnection.getDeploymentMode Completed returning value: Enterprise

2016-10-07 11:37:55,980 INFO  [238120] HLMClusterLicenseAgent: .null0_AssignClusterToELMRequest  Found current UC app deployment mode to be: Enterprise

2016-10-07 11:37:55,980 INFO  [238120] HLMClusterLicenseAgent: .null0_AssignClusterToELMRequest  Found current Global deployment mode to be: HCS

2016-10-07 11:37:55,980 INFO  [238120] HLMClusterLicenseAgent: .null0_AssignClusterToELMRequest  Setting the UC app deployment mode to be: HCS

2016-10-07 11:37:55,981 INFO  [238120] UCAppDeploymentModeConnection: Opening secure connection to: https://10.48.52.10:8443/platform-services/services/DeploymentModeService?wsdl

2016-10-07 11:37:55,981 INFO  [238120] UCAppDeploymentModeConnectionPort successfully opened

2016-10-07 11:37:55,993 INFO  [238120] UCAppDeploymentModeConnection: Setting userName for SOAP connection to: ccmadmin

2016-10-07 11:37:55,993 INFO  [238120] UCAppDeploymentModeConnection: Accepting Certificate from UC Application

2016-10-07 11:37:55,993 INFO  [238120] UCAppDeploymentModeConnection.setDeploymentMode Called

2016-10-07 11:37:56,183 DEBUG [238120] UCAppDeploymentModeConnection.setDeploymentMode Response Recieved

2016-10-07 11:37:56,189 INFO  [238120] UCAppRestartSystemConnection: Opening secure connection to: https://10.48.52.10:8443/platform-services/services/RestartSystemService?wsdl

2016-10-07 11:37:56,205 INFO  [238120] UCAppRestartSystemConnection: Setting userName for SOAP connection to: ccmadmin

2016-10-07 11:37:56,205 INFO  [238120] UCAppRestartSystemConnection: Accepting Certificate from UC Application

 

2016-10-07 11:54:12,248 INFO  [238120] ELMApi: initialized, connected to plm-hcs10

2016-10-07 11:54:12,248 DEBUG [238120] ELMApi: createCluster called - force registration is enabled.

2016-10-07 11:54:12,248 DEBUG [238120] ELMApi:Creating Cluster with clusterName: test-cluster-Z|HostName: 10.48.52.10|userid: ccmadmin|password: ******|Type: HUCM

2016-10-07 11:54:12,360 DEBUG [238120] ELMApi: createCluster  Response status = 400

2016-10-07 11:54:12,360 ERROR [238120] ELMApi: createCluster completes with an error. LM resp status: 400

2016-10-07 11:54:12,360 ERROR [238120] HLMClusterLicenseAgent:  Failed to assign cluster test-cluster-Z due to an internal error in LM plm-hcs10

2016-10-07 11:54:12,360 DEBUG [238120] hlmSDRUtil.updateJob

2016-10-07 11:54:12,412 DEBUG [238120] hlmSDRUtil.beginTransaction

2016-10-07 11:54:12,415 DEBUG [238120] hlmSDRUtilcommitTransaction

2016-10-07 11:54:12,538 INFO  [238120] AgentFSM::currentState changed from null0 to stopped

2016-10-07 11:54:12,539 INFO  [238120] Agent route no longer needed...moving it to stopped routes

2016-10-07 11:54:12,539 INFO  [238120] Route removed from context >HLM(8032fcf3-9368-4644-a46f-46445247e893)<

2016-10-07 11:54:12,539 DEBUG [238120] +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

2016-10-07 11:54:12,539 DEBUG [238120]  Agent info : HLM(8032fcf3-9368-4644-a46f-46445247e893): RED

Assign test-cluster-Z to plm-hcs10 is Failed

Verificación

Verifique el modo de implementación de PLM explorando la URL siguiente. Se requiere ID de usuario y contraseña de la plataforma PLM

           https://PLM_IP_Address /elm-resources/

Solución 5

Habilite la conectividad IP entre HCM-F y PLM en el puerto 8443. Desde los registros HLM no puede conectarse al PLM

2016-10-18 12:17:47,119 DEBUG [264677] ELMApi:Creating Cluster with clusterName: cluster delta|HostName: 10.48.55.26|userid: administrator|password: ******|Type: HUCM

2016-10-18 12:17:47,904 DEBUG [43] KeepAliveConsumerProcessor::process -- enter

2016-10-18 12:17:47,905 DEBUG [43] KeepAliveConsumerProcessor::process -- received broadcast message for service sdrcnf

2016-10-18 12:17:47,905 DEBUG [43] noChange -- sdrcnf is Alive

2016-10-18 12:17:47,905 DEBUG [43] KeepAliveMonitor::setExpiresBy:

2016-10-18 12:17:47,905 DEBUG [43]   now:         18/10/2016 12:17:47.905

2016-10-18 12:17:47,905 DEBUG [43]   expected by: 18/10/2016 12:19:47.905

2016-10-18 12:17:47,905 DEBUG [71] KeepAliveConsumerProcessor::process -- enter

2016-10-18 12:17:47,906 DEBUG [71] KeepAliveConsumerProcessor::process -- received broadcast message for service sdrcnf

2016-10-18 12:17:47,906 DEBUG [71] noChange -- sdrcnf is Alive

2016-10-18 12:17:47,906 DEBUG [71] KeepAliveMonitor::setExpiresBy:

2016-10-18 12:17:47,906 DEBUG [71]   now:         18/10/2016 12:17:47.906

2016-10-18 12:17:47,906 DEBUG [71]   expected by: 18/10/2016 12:19:47.906

2016-10-18 12:17:50,188 ERROR [264677] HLMClusterLicenseAgent: .null0_AssignClusterToELMRequest  javax.ws.rs.WebApplicationException: javax.xml.bind.MarshalException

- with linked exception:

[java.net.NoRouteToHostException: No route to host]

2016-10-18 12:17:50,188 DEBUG [264677] hlmSDRUtil.updateJob

2016-10-18 12:17:50,247 DEBUG [264677] hlmSDRUtil.beginTransaction

2016-10-18 12:17:50,249 DEBUG [264677] hlmSDRUtilcommitTransaction

2016-10-18 12:17:50,356 INFO  [264677] AgentFSM::currentState changed from null0 to stopped

2016-10-18 12:17:50,356 INFO  [264677] Agent route no longer needed...moving it to stopped routes

Verificación

 Verifique la conectividad entre PLM y HCM-F

admin:utils network ping XXX.YYY.WWW.ZZZ

Problema: El administrador de HCM-F no puede asignar el clúster de UC a la instancia de PLM

El trabajo falla con el error mostrado en la imagen

;

Solución

Agregar credenciales de plataforma en HCM-F o en CUCDM

2016-10-06 16:26:48,508 DEBUG [264674] hlmSDRUtilcommitTransaction

2016-10-06 16:26:48,624 ERROR [264674] HLMClusterLicenseAgent: .null0_AssignClusterToELMRequest  no platform credential is configured for test-cluster-Y

2016-10-06 16:26:48,624 DEBUG [264674] hlmSDRUtil.updateJob

2016-10-06 16:26:48,675 DEBUG [264674] hlmSDRUtil.beginTransaction

2016-10-06 16:26:48,677 DEBUG [264674] hlmSDRUtilcommitTransaction

2016-10-06 16:26:48,798 INFO  [264674] AgentFSM::currentState changed from null0 to stopped

2016-10-06 16:26:48,798 INFO  [264674] Agent route no longer needed...moving it to stopped routes

2016-10-06 16:26:48,798 INFO  [264674] Route removed from context >HLM(1b32a922-3619-44b0-8004-7f6fc930c419)<

2016-10-06 16:26:48,798 DEBUG [264674] +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

2016-10-06 16:26:48,798 DEBUG [264674]  Agent info : HLM(1b32a922-3619-44b0-8004-7f6fc930c419): RED

Assign test-cluster-Y to plm-hcs10 is Failed

2016-10-06 16:26:48,798 DEBUG [264674]  AgentMessageProcessor::Agent is stopped after process, removed it from persistence store

 

Verificación

Verifique que las credenciales de la plataforma estén configuradas en HCM-F

Vaya a Administración de aplicaciones > Aplicación de clúster > Credencial > Plataforma

or

Vaya a Administración > Credencial predeterminada > Plataforma de tipo de aplicación UC (CUCM/CUCXN)