Configuration and Installation Workflows

Deployment and Installation Workflow for an On-Premises Deployment

Procedure
     Command or ActionPurpose
    Step 1Read the Cisco Jabber Planning Guide located at http:/​/​www.cisco.com/​c/​en/​us/​support/​unified-communications/​jabber-windows/​products-installation-guides-list.html.  

    • Choose your deployment scenario.

    • Review requirements to confirm that you meet them.

    • Review contact sources to determine which contact source you will use.

     
    Step 2Configure Directory Integration for an On-Premises Deployment.  

     

    Step 3Configure Certificates for an On-Premises Deployment.  

    Certificates are required for each service to which the Jabber clients connect.

     
    Step 4Service Discovery.  

     

    Step 5Configure a Service Profile.  

     

    Step 6Configure IM and Presence Service for an On-Premises Deployment.  

     

    Step 7Configure Voice and Video Communications for On-Premises Deployments.  

     

    Step 8Complete one of the following:  

     

    Step 9Configure Conferencing for an On-Premises Deployment.  

     

    Step 10Configure Client.  

     
    Step 11Install Client.  

     

    Deployment and Installation Workflow for Phone Mode

    Procedure
       Command or ActionPurpose
      Step 1Read the Cisco Jabber Planning Guide located at http:/​/​www.cisco.com/​c/​en/​us/​support/​unified-communications/​jabber-windows/​products-installation-guides-list.html.  

      • Choose your deployment scenario.

      • Review requirements to confirm that you meet them.

      • Review contact sources to determine which contact source you will use.

       
      Step 2Configure Directory Integration for an On-Premises Deployment.  

       

      Step 3Configure Certificates for an On-Premises Deployment.  

      Certificates are required for each service to which the Jabber clients connect.

       
      Step 4Service Discovery.  

       

      Step 5Configure a Service Profile.  

       

      Step 6Configure Voice and Video Communications for On-Premises Deployments.  

       

      Step 7Complete one of the following:  

       

      Step 8Configure Conferencing for an On-Premises Deployment.  

       

      Step 9Configure Conferencing
       

       

      Step 10Configure Client.  

       

      Step 11Install Client.  

       

      Deployment and Installation Workflow for a Cloud-Based Deployment

      Procedure
         Command or ActionPurpose
        Step 1Read the Cisco Jabber Planning Guide located at http:/​/​www.cisco.com/​c/​en/​us/​support/​unified-communications/​jabber-windows/​products-installation-guides-list.html.  

        • Choose your deployment scenario.

        • Review requirements to confirm that you meet them.

        • Review contact sources to determine which contact source you will use.

         
        Step 2Configure Directory Integration
         

         

        Step 3Set Up Certificate Validation
         

         

        Step 4Service Discovery
         

         

        Step 5Configure a Service Profile
         

         

        Step 6Configure IM and Presence Service for Cloud-Based Deployments
                  		 
        Step 7 Configure Voice and Video Communication for Cloud-Based Deployments
         

         

        Step 8Configure Voicemail for Cloud-Based Deployments
                  		 
        Step 9Configure Conferencing for a Cloud-Based Deployment Using Cisco WebEx Meeting Center
                  		 
        Step 10Configure Client
                  		 
        Step 11Install Client