This section describes new and changed features that were released with Unified Communications Manager Release 11.5(1).

• Hunt Group Login Status

• Redirect to Device

Note	Cisco Spark Device has been added as a new device type for this release of Unified Communications Manager and may appear in the user's control list. However, Cisco Spark Device is not a supported device for this release of Cisco Unified TAPI.

This section describes new and changed features that were released with Unified Communications Manager Release 11.0(1)

• Default CTI IP Addressing for Devices

• Ringback on SIP 183 for Transfers

This section describes new and changed features that are supported in Unified Communications Manager Release 9.1(1) and contains the following topics:

CTI Remote Device:

• Application Dial Rule Support

• DTMF Support

• Extend Mode Support for CSF Is Removed

• Remote Destination Reachability Verification

This section describes new and changed features that are supported in Cisco Unified Communications Manager release 9.0(1) and contains the following topics:

• Call Queuing Feature Support

• Call Recording and Call Recording Enhancement

• CIUS Session Persistency

• CTI Remote Device

• Hunt Pilot Connected Number

• URI Dialing

This section describes new and changed features that are supported in Unified Communications Manager release 8.6(1) and contains the following topics:

• EnergyWise DeepSleep Mode Support

• FIPS Compliance

• Password Expiry Notification

This section describes new and changed features that are supported in Unified Communications Manager release 8.5(1) and contains the following topics:

• Agent Greeting

• Agent Zip Tone

• Early Offer

• Extension Mobility Memory Optimization Option

• Other-Device State Notification

• Unrestricted Unified CM

• Whisper Coaching

Note	Cisco announces the end-of-Availability for Cisco TAPI Wave Driver. The last release includes the affected product(s) is Unified Communication Manager Release 8.X. Unified Communication Manager 9.0(1) and later does not include Cisco TAPI Wave Driver.

Note

Develop Partners are encouraged to adopt support for Cisco TAPI Media Driver introduced in Unified Communication Manager 8.0(1) (released March 2010), which provides like or better functionality. Information for Cisco TAPI Media Driver can be found in the TAPI Developer Guides at the following location: http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/products_programming_reference_guides_list.html

This section describes new and changed features that are supported in Unified Communications Manager Release 8.0(1) and contains the following topics:

• Call Control Discovery

• Call PickUp

• CallFwdAll Notification

• End-to-End Call Trace

• Extension Mobility Cross Cluster

• External Call Control

• Hunt List

• New Cisco Media Driver

• Secured Monitoring and Recording

• Support for 100 + Directory Numbers

This section describes new and changed features that are supported in Unified Communications Manager Release 7.1(3) and contains the following topics:

• Support for Cisco Unified IP Phone 6900 and 9900 Series

This section describes new and changed features that are supported in Unified Communications Manager Release 7.1(2) and contains the following topics:

• IPv6

• Direct Transfer Across Lines

• Message Waiting Indicator Enhancement

• Swap and Cancel Softkeys

• Drop-Any-Party

• Park Monitoring

• Logical Partitioning

• Support for Cisco Unified IP Phone 6900 and 9900 Series

• Device State Server

This section describes new and changed features supported in Unified Communications Manager Release 7.0(1) and contains the following:

• Join Across Lines (SIP)

• Localization Infrastructure Changes

• Secure Conference

• Calling Party Normalization

• Click to Conference

• Microsoft Windows Vista

Note

For the features, Join Across Lines, Do Not Disturb-Reject, and Calling Party Normalization, each TAPI application must be upgraded to a version that is compatible with these features. Additionally, if you are upgrading from Release 5.1 and you use Join Across Lines, the Conference Chaining feature must not be enabled or used until all applications are either upgraded to a version compatible with the new CUCM version. Also, you should verify that the applications are not impacted by the Conference Chaining feature.

This section describes new and changed features that Unified Communications Manager Release 6.1(x) supports and contains the following topic:

• Join Across Lines (SCCP)

This section describes new and changed features that are supported in Unified Communications Manager Release 6.0(1), and contains the following topics:

• Intercom

• Secure Conference

• Do Not Disturb

• Conference Enhancements

• Arabic and Hebrew Language

• Additional Features Supported on SIP Phones

• Silent Monitoring

• Call Recording and Call Recording Enhancement

• Calling Party IP Address

This section describes new and changed features supported in Unified Communications Manager, Release 5.1 and contains the following topics:

• Partition

• Alternate Script

• Secure RTP

• Presentation Indication

• Refer and Replaces for Phones That Are Running SIP

• SIP URL Address

• Presentation Indication

• Presentation Indication

• Unicode

This section describes new and changed features that are supported in Unified Communications Manager, Release 5.0, and contains the following topics:

• Unicode

• Line-Side Phones That Run SIP

This section describes new and changed features that are supported in Unified Communications Manager, Release 4.x, and contains the following topics:

The chapter includes the following list of all features that are available in the Unified TSP implementation of Cisco Unified Communications Manager, prior to Release 4.x:

• Forwarding

• Extension Mobility

• Privacy Release

• Join

• Privacy Release

• Barge and cBarge

• XSI Object Pass Through

• Silent Install