The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
•9-Pin Serial Port Terminal Cable
Table 3-1 describes the pin-to-pin configuration of the RS-232 terminal cable provided with the Cisco Unified Videoconferencing 5100.
|
|
|
---|---|---|
1 |
NC |
|
2 |
RXD |
Input |
3 |
TXD |
Output |
4 |
NC |
|
5 |
GND |
|
6 |
NC |
|
7 |
NC |
|
8 |
NC |
|
9 |
NC |
Table 3-2 describes the pin-out configuration of the 100 Mbps RJ-45 Ethernet connector.
|
|
|
---|---|---|
1 |
TXD+ |
Output |
2 |
TXD+ |
Output |
3 |
RXD+ |
Input |
4 |
NC |
|
5 |
NC |
|
6 |
RXD- |
Input |
7 |
NC |
|
8 |
NC |
Table 3-3 describes the pin-out configuration of the 1 Gbps RJ-45 Ethernet connector.