Overview
Cisco UCS C245 M6 Server (UCSC-C245-M6SX) server is orderable in one Small form-factor (SFF) drives version, with 24-drive back-plane front panel configuration:
-
Front-loading drive bays 1—24 support 2.5-inch SAS/SATA drives.
-
Optionally, front-loading drive bays 1 to 4 support 2.5-inch NVMe SSDs (with optional front NVMe cables).
-
Optionally, Risers 1B and 3B support up to four Gen4 NVMe SSDs (2 drives per riser).
Following PCIe Riser combinations are available:
-
Riser 1—Supports Riser 1A and 1B. PCIe slots 1, 2, and 3 numbered bottom to top with the following options:
-
Riser 1A (UCSC-RIS1A-240M6)—Slot 1 PCIe supports full height, full length PCIe Add-in-card; Slot 2 PCIe supports full height, full length PCIe Add-in-card; Slot 3 PCIe supports full height, full length PCIe Add-in-card.
-
Riser 1B (UCSC-RIS1B-245M6) (Storage Option)—Slot 1 PCIe is disabled; Slot 2 supports 2.5-inch NVMe SSD; Slot 3 supports 2.5-inch NVMe SSD.
-
-
Riser 2—Supports Riser 2A. PCIe slots 4, 5, and 6 numbered bottom to top with the following options:
-
Riser 2A (UCSC-RIS2A-240M6)—Slot 4, 5, and 6 PCIe support full height, full length PCIe Add-in-card.
-
-
Riser 3—Supports Riser 3A, 3B and 3C. PCIe slots 7 and 8 numbered bottom to top with the following options:
-
Riser 3A (UCSC-RIS3A-240M6)—Slot 7 PCIe supports full height, full length PCIe Add-in-card; Slot 8 PCIe supports full height, full length PCIe Add-in-card.
-
Riser 3B (UCSC-RIS3B-240M6)—Slot 7 supports 2.5-inch NVMe SSD; Slot 8 supports 2.5-inch NVMe SSD.
-
Riser 3C (UCSC-RIS3C-240M6)—Slot 7 PCIe supports full height, full length PCIe Add-in-card.
-
Network connectivity through either a dedicated modular LAN over motherboard card (mLOM) that accepts a series 14xxx Cisco virtual interface card (VIC) or a third-party NIC. These options are in addition to Intel x550 10Gbase-T mLOM ports built into the server motherboard.
-
Or, one mLOM/VIC card that provides 10/25/40/50/100 Gbps. The following mLOMs are supported:
-
Cisco UCS VIC 15428 Quad Port CNA MLOM (UCSC-M-V5Q50G) supports:
-
a x16 PCIe Gen4 Host Interface to the rack server
-
four 10G/25G/50G SFP56 ports
-
4GB DDR4 Memory, 3200 MHz
-
Integrated blower for optimal ventilation
-
-
Cisco UCS VIC 15427 Quad Port CNA MLOM (UCSC-M-V5Q50GV2) supports:
-
a x16 PCIe Gen4 Host Interface to the rack server
-
four 10G/25G/50G SFP+/SFP28/SFP56 ports
-
4GB DDR4 Memory, 3200 MHz
-
Integrated blower for optimal ventilation
-
Secure boot support
-
-
Cisco UCS VIC 15425 Quad Port 10G/25G/50G SFP56 CNA PCIe (UCSC-P-V5Q50G)
-
a x16 PCIe Gen4 Host Interface to the rack server
-
Four 10G/25G/50G SFP+/SFP28/SFP56 ports
-
4GB DDR4 Memory, 3200MHz
-
Integrated blower for optimal ventilation
-
Secure boot support
-
-
Cisco UCS VIC 15238 Dual Port 40/100G QSFP28 mLOM (UCSC-M-V5D200G) supports:
-
a x16 PCIe Gen4 Host Interface to the rack server
-
two 40G/100G QSFP28 ports
-
4GB DDR4 Memory, 3200 MHz
-
Integrated blower for optimal ventilation
-
-
Cisco UCS VIC 15237 Dual Port 40G/100G/200G QSFP56 mLOM (UCSC-M-V5D200GV2) supports:
-
a x16 PCIe Gen4 Host Interface to the rack server
-
two 40G/100G/200G QSFP/QSFP28/QSFP56 ports
-
4GB DDR4 Memory, 3200 MHz
-
Integrated blower for optimal ventilation
-
Secure boot support
-
-
Cisco UCS VIC 15235 Dual Port 40G/100G/200G QSFP56 CNA PCIe (UCSC-P-V5D200G)
-
a x16 PCIe Gen4 Host Interface to the rack server
-
two 40G/100G/200G QSFP/QSFP28/QSFP56 ports
-
4GB DDR4 Memory, 3200MHz
-
Integrated blower for optimal ventilation
-
Secure boot support
-
-
Cisco UCS VIC 1477 Dual Port 40/100G QSFP28 (UCSC-M-V100-04)
-
a x16 PCIe Gen3 Host Interface to the rack server
-
two 40G/100G QSFP28 ports
-
2GB DDR3 Memory, 1866 MHz
-
-
Cisco UCS VIC 1467 Quad Port 10/25G SFP28 mLOM (UCSC-M-V25-04) supports:
-
a x16 PCIe Gen3 Host Interface to the rack server
-
four 10G/25G QSFP28 ports
-
2GB DDR3 Memory, 1866 MHz
-
These options are in addition to Intel x550 10Gbase-T mLOM ports built into the server motherboard.
-
-
The following virtual interface cards (VICs) are supported in addition to some third-party VICs):
-
Cisco UCS VIC 1455 quad port 10/25G SFP28 PCIe (UCSC-PCIE-C25Q-04=)
-
Cisco UCS VIC 1495 Dual Port 40/100G QSFP28 CNA PCIe (UCSC-PCIE-C100-042)
-
-
Cisco UCS C245 M6 Server (UCSC-C245-M6SN) server is also available as GPU Ready Configuration unit. The server is configured to accept GPU, but GPUs are not installed while placing the order.
GPU Ready Configuration units are shipped with low profile heatsink: UCSC-HSLP-C245M6 and UCSC-ADGPU-245M6 (GPU air duct).
Note |
GPU Ready Configuration should follow the same temperature limit as GPU configured unit. You should select the GPU airduct PID to enable GPU Ready Configuration. Follow Cisco Commerce Workspace (CCW) rules for more details. |