When the switch is running in installed mode, the Cisco IOS XE package (.pkg) files and provisioning file (packages.conf) are stored in the
system board flash memory (flash:). When the switch is running in bundle mode, the booted Cisco IOS XE software bundle (.bin) file is stored in the system board flash memory
(flash:) or USB flash memory (usbflash0:).
To display information about the provisioning software that is currently running on the switch, use the show version privileged EXEC command. In the display, check the line that begins with
System bundle file is....
When the switch is running in installed mode, this line displays the name and location of the booted Cisco IOS XE provisioning file, typically
flash:packages.conf.
When the switch is running in bundle mode, this line displays the name and location of the booted Cisco IOS XE bundle file.
To display information about the Cisco IOS XE package files that are running on the switch, use the show version running privileged EXEC command.
When the switch is running in installed mode, this command displays information about the set of package files contained in the booted provisioning
file.
When the switch is running in bundle mode, this command displays information about the set of package files contained in the booted Cisco
IOS XE software bundle.
 Note |
For usbflash0:, the default format is FAT16, while FAT32 format is also supported.
|
Switch# format usbflash0: ?
FAT16 FAT16 filesystem type
FAT32 FAT32 filesystem type