Technical Specifications

This appendix contains these topics:

Environmental Specifications

This table describes the environmental specifications.

Table 1. Environmental Specifications for All Catalyst 2960-X and 2960-XR Switches

Environmental Ranges

Operating temperature

1

23 to 113°F (–5 to 45°C) up to 5,000 ft (1500 m)


23 to 104°F (–5 to 40°C) up to 10,000 ft (3000 m)

Storage temperature

–40 to 158°F (–40 to 70°C) up to 15,000 ft (4500 m)

Relative humidity

10 to 95% (noncondensing)

Storage altitude

Up to 15,000 ft (4500 m)

1 Minimum ambient temperature for cold start is 32°F (0°C)
Table 2. Environmental and Physical Specification for the AC Power Supplies for the Catalyst 2960-XR Switches

Power Requirements

Operating temperature




23 to 113°F (–5 to 45°C)

Storage temperature


–40 to 158°F (–40 to 70°C)

Relative humidity

10-95% (non-condensing)

Altitude

Up to 10,000 ft (3,000 m)

Weight

  • PWR-C2-250WAC: 2.5 lb (1.1 kg)
  • PWR-C2-640WAC: 3.1 lb (1.4 kg)
  • PWR-C2-1025WAC: 3.4 lb (1.6 kg)

Dimensions


  • PWR-C2-250WAC:1.58 x 10.22 x 3.75 in. (3.5 x 26 x 9.53 cm)
  • PWR-C2-640WAC: 1.58 x 10.22 x 3.75 in. (3.5 x 26 x 9.53 cm)
  • PWR-C2-1025WAC: 1.58 x 11.72 x 3.75 in. (3.5 x 29.8 x 9.53 cm)
Note 

Dimensions shown exclude the extraction handle, which measures 1.55 in. (3.9 cm).

Specifications for the Catalyst 2960-X Switches

Table 3. Catalyst 2960X-48FPD-L, 2960X-48LPD-L, 2960X-24PD-L, 2960X-48FPS-L, 2960X-48LPS-L, 2960X-24PSQ-L, and 2960X-24PS-L Switch Specifications

Power Requirements

AC input voltage







100 to 240 VAC (autoranging)

  • 9 to 4 A, 50 to 60 Hz (Catalyst 2960X-48FPD-L)

  • 5 to 2 A, 50 to 60 Hz (Catalyst 2960X-48LPD-L)
  • 
5 to 2 A, 50 to 60 Hz (Catalyst 2960X-24PD-L)

  • 9 to 4 A, 50 to 60 Hz (Catalyst 2960X-48FPS-L)
  • 
5 to 2 A, 50 to 60 Hz (Catalyst 2960X-48LPS-L)

  • 5 to 2 A, 50 to 60 Hz (Catalyst 2960X-24PS-L)

  • 2 to 4 A, 50 to 60 Hz (Catalyst 2960X-24PSQ-L)

DC input voltage for 
RPS 2300


  • +12 V @ 4 A, –53 V @ 15 A (Catalyst 2960X-48FPD-L)

  • +12 V @ 4 A, –53 V @ 8 A (Catalyst 2960X-48LPD-L)

  • +12 V @ 3A, –53 V @ 8 A (Catalyst 2960X-24PD-L)
  • 
12 V @ 4 A, –53 V @ 15 A (Catalyst 2960X-48FPS-L)

  • +12 V @ 4 A, –53 V @ 8 A (Catalyst 2960X-48LPS-L)

  • +12 V @ 3 A, –53 V @ 8 A (Catalyst 2960X-24PS-L)
    Note 

    The Catalyst 2960X-24PSQ-L does not support the RPS 2300

Power consumption

  • 149 W, 508 BTUs per hour (Catalyst 2960X-48FPD-L)

  • 103 W, 351 BTUs per hour (Catalyst 2960X-48LPD-L)

  • 92 W, 313 BTUs per hour (Catalyst 2960X-24PD-L)

  • 149 W, 508 BTUs per hour (Catalyst 2960X-48FPS-L)
  • 102 W, 348 BTUs per hour (Catalyst 2960X-48LPS-L)
  • 90 W, 307 BTUs per hour (Catalyst 2960X-24PS-L)

  • 34.8 W, 119 BTUs per hour (Catalyst 2960X-24PSQ-L)

Power rating

  • 0.89 KVA (Catalyst 2960X-48FPD-L)

  • 0.48 KVA (Catalyst 2960X-48LPD-L)

  • 0.47 KVA (Catalyst 2960X-24PD-L)

  • 0.89 KVA (Catalyst 2960X-48FPS-L)

  • 0.49 KVA (Catalyst 2960X-48LPS-L)

  • 0.49 KVA (Catalyst 2960X-24PS-L)

  • 0.16 KVA (Catalyst 2960X-24PSQ-L)

PoE+

  • 30 W-per-port maximum, 740-W switch maximum 
(Catalyst 2960X-48FPD-L and 2960X-48FPS-L switches)

  • 15.4 W-per-port maximum, 370-W switch maximum 
(Catalyst 2960X-48LPD-L, 2960X-24PD-L, 2960X-48LPS-L, and 2960X-24PS-L switches)
    Note 

    The Catalyst 2960X-48LPD-L and 2960X-48LPS-L can support up to 12 ports of PoE+ (30 W-per-port).

  • 30 W-per-port maximum, 110-W switch maximum 
(Catalyst 2960X-24PSQ-L switch)

Physical Dimensions

Weight



  • 12.9 lb (5.8 kg) (Catalyst 2960X-48FPD-L)

  • 12.8 lb (5.8 kg) (Catalyst 2960X-48LPD-L)

  • 12.7 lb (5.8 kg) (Catalyst 2960X-24PD-L)
  • 13.2 (6.0 kg) (Catalyst 2960X-48FPS-L)

  • 
12.9 lb (5.8 kg) (Catalyst 2960X-48LPS-L)

  • 12.8 lb (5.8 kg) (Catalyst 2960X-24PS-L)

  • 12.8 lb (5.8 kg) (Catalyst 2960X-24PSQ-L)

Dimensions (H x D x W)

1.75 x 14.50 x 17.5 in. (4.45 x 36.83 x 44.5 cm). Applies to all PoE switches except the Catalyst 2960X-24PSQ-L switch.

1.75 x 11.02 x 17.5 in. (4.45 x 28.0 x 44.5 cm). Applies to the Catalyst 2960X-24PSQ-L switch.

2 Power consumption values for the power consumed internally by the switch at 120 VAC 60 Hz. The information is based on the rating of the power supply (maximum) and does not reflect the actual measured consumption numbers. For the actual power consumption based on measurement, see the data sheet at: http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps12995/data_sheet_c78-728232.html
3 Power rating values for the switch input power.
Table 4. Catalyst 2960X-48TD-L, 2960X-24TD-L, 2960X-48TS-L, 2960X-24TS-L, 2960X-48TS-LL, 2960X-F24TS-LL, Switch Specifications

Power Requirements

AC input voltage




100 to 240 VAC (autoranging)

  • 1 to 0.5 A, 50 to 60 Hz (Catalyst 2960X-48TD-L)
  • 1 to 0.5 A, 50 to 60 Hz (Catalyst 2960X-24TD-L)
  • 1 to 0.5, 50 to 60 Hz (Catalyst 2960X-48TS-L)
  • 1 to 0.5 A, 50 to 60 Hz (Catalyst 2960X-24TS-L)

  • 1 to 0.5 A, 50 to 60 Hz (Catalyst 2960X-48TS-LL)
  • 1 to 0.5 A,, 50 to 60 Hz (Catalyst 2960X-24TS-LL)


DC input voltage for 
RPS 2300


  • +12 V @ 4 A, –53 V @ 8 A (Catalyst 2960X-48TD-L)

  • +12 V @ 3 A, (Catalyst 2960X-24TD-L)

  • +12 V @ 5 A, (Catalyst 2960X-48TS-L)
  • 
+12 V @ 4 A, (Catalyst 2960X-24TS-L)

Power consumption 

4

  • 47 W, 161 BTUs per hour (Catalyst 2960X-48TD-L)

  • 32 W, 110 BTUs per hour (Catalyst 2960X-24TD-L)

  • 49 W, 168 BTUs per hour (Catalyst 2960X-48TS-L)

  • 37 W, 126 BTUs per hour (Catalyst 2960X-24TS-L)

  • 55 W, 187 BTUs per hour (Catalyst 2960X-48TS-LL)

  • 37 W, 126 BTUs per hour (Catalyst 2960X-24TS-LL)


Power rating5

  • 
0.049 KVA (Catalyst 2960X-48TD-L)
  • 0.034 KVA (Catalyst 2960X-24TD-L)

  • 0.051 KVA (Catalyst 2960X-48TS-L)

  • 0.039 KVA (Catalyst 2960X-24TS-L)

  • 0.46 KVA (Catalyst 2960X-48TS-LL)
  • 0.035 KVA (Catalyst 2960X-24TS-LL)


Physical Dimensions

Weight


Dimensions (H x D x W)

9.6 lb (4.3 kg) Catalyst 2960X-48TD-L

8.9 lb (4.0 kg) Catalyst 2960X-24TD-L

9.4 lb (4.2 kg) Catalyst 2960X-48TS-L

8.9 lb (4.0 kg) Catalyst 2960X-24TS-L

8.9 lb (4.0 kg) Catalyst 2960X-48TS-LL

8.2 lb (3.7 kg) Catalyst 2960X-24TS-LL

1.75 x 11 x 17.50 in. (4.45 x 27.94 x 44.5 cm) All non-PoE switches.

4 Power consumption values for the power consumed internally by the switch at 120 VAC 60 Hz. The information is based on the rating of the power supply (maximum) and does not reflect the actual measured consumption numbers. For the actual power consumption based on measurement, see the data sheet at: http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps12995/data_sheet_c78-728232.html
5 Power rating values for the switch input power.

Specifications for the Catalyst 2960-XR Switches

Table 5. Physical Specifications for the Catalyst 2960-XR Switches
Physical Dimensions

Weight


  • 3.55 lb (1.61 kg)
  • 3.1 lb (1.41 kg)
  • 2.55 lb (1.16 kg)
  • 2.75 lb (1.25 kg)
  • 
 0.2 lb (0.09 kg)


Weights do not include power supplies.

Dimensions (H x D x W)

1.75 x 16.1 x 17.5 in. (4.45 x 41.9 x 44.5 cm)

Dimensions do not include power supplies.

  • Add an additional depth of 1.6 in (4.1 cm) for PWR-C2-250WAC and PWR-C2-640WAC power supplies

  • Add an additional depth of 3.1 in (7.9 cm) for the PWR-C2-1025WAC power supply

Table 6. Power Specifications for the AC Power Catalyst 2960-XR Switches

Power Requirements

Maximum output power




  • PWR-C2-250WAC: 250 W
  • PWR-C2-640WAC: 640 W
  • PWR-C2-1025WAC: 1025 W

Input voltage and Frequency


  • PWR-C2-250WAC: 250 W, 100-240 VAC, (autoranging) 50-60 Hz
  • PWR-C2-640WAC: 640 W, 100-240 VAC, (autoranging) 50-60 Hz
  • PWR-C2-1025WAC: 1025 W, 115-240 VAC, (autoranging) 50-60 Hz

Input current

6
  • PWR-C2-250WAC: 4–2 A
  • PWR-C2-640WAC: 8–4 A
  • PWR-C2-1025WAC: 12–6 A

Output ratings

  • PWR-C2-250WAC: +12 V @ 20.83 A
  • PWR-C2-640WAC: +12 V @ 20.83 A, –54 V@7.36 A
  • PWR-C2-1025WAC: +12 V @ 20.83 A, –54 V@14.6 A

Total input BTU7

  • PWR-C2-250WAC: 945 BTUs per hour, 277 W
  • PWR-C2-640WAC: 2371 BTUs per hour, 695 W
  • PWR-C2-1025WAC: 3801 BTUs per hour, 1114 W

Total output BTU
1

  • PWR-C2-250WAC: 853 BTUs per hour, 250 W
  • PWR-C2-640WAC: 2183 BTUs per hour, 640 W
  • PWR-C2-1025WAC: 3497 BTUs per hour, 1025 W
6 The information is based on the rating of the power supply (max.) and does not reflect the actual measured consumption numbers. For the actual power consumption based on measurement, see the data sheet at: http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps12995/data_sheet_c78-728232.html
7 The total input and total output BTU ratings refer to input power to the power supply and output power to the switch. The BTU ratings are based on 100 VAC for the 250-W and 640-W power supplies and 115 VAC for the 1025-W power supply .
Table 7. Power Supply Module Specifications
Physical Dimensions

Weight

PWR-C2-1025WAC=

PWR-C2-640WAC=

PWR-C2-250WAC=

PWR-C2-BLANK=

  • 3.55 lb (1.61 kg)
  • 3.1 lb (1.41 kg)
  • 2.55 lb (1.16 kg)
  • 
 0.2 lb (0.09 kg)


Weights do not include power supplies.

Dimensions (H x W x D)

PWR-C2-1025WAC

PWR-C2-640WAC

PWR-C2-250WAC

  • 1.58 x 3.75 x 13.25 in. (4.0 x 9.5 x 33.7 cm)
  • 1.58 x 3.75 x 11.75 in. (4.0 x 9.5 x 29.8 cm)
  • 1.58 x 3.75 x 11.75 in. (4.0 x 9.5 x 29.8 cm)

Recommendations

  • An additional10.3 in. depth is required behind the power supply handle for power supply removal

  • An additional 1.5 in. depth is required behind the power supply for power cord bend radius

  • An additional 4.7 in. depth is required behind the chassis rear for stack module removal

  • An additional 5.2 in. depth is required behind the chassis rear for stack cable bend radius