—التدقيق التنظيمي ومعلومات السلامة

تستخدم هذه الوثيقة المصطلحات التالية:


ملاحظة

تعني على القارئ توخي الحذر. في هذه الحالة، ربما تفعل شيئًا قد يؤدي إلى تلف الجهاز أو فقد البيانات.



تحذير

إرشادات سلامة هامة

يشير رمز التحذير هذا إلى وجود خطر. انت في موقف قد يؤدي إلى حدوث إصابة جسدية. قبل العمل على أي جهاز، كن على دراية بالمخاطر الناجمة عن الدوائر الكهربائية ويجب أن تكون على معرفة بالممارسات القياسية لتفادي الحوادث. استخدم رقم البيان الموجود في نهاية كل تحذير لتحديد موقع ترجمته في تحذيرات السلامة المترجمة والمرفقة مع هذا الجهاز.

احفظ هذه الإرشادات



warning_nonsafety

يتم توفير البيانات التى تستخدم هذا الرمز للحصول على معلومات إضافية و للإمتثال إلى الإشتراطات التنظيمية و متطلبات العميل.


Statement 1051—Laser Radiation


Warning

Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams or view directly with optical instruments.


Statement 43—Jewelry Removal Warning


Warning

Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces, and watches). Metal objects will heat up when connected to power and ground and can cause serious burns or weld the metal object to the terminals.


Statement 1017—Restricted Area


Warning

This unit is intended for installation in restricted access areas. A restricted access area can be accessed by skilled, instructed or qualified personnel.


Statement 1004—Installation Instructions


Warning

Read the installation instructions before using, installing or connecting the system to the power source.


Statement 1030—Equipment Installation


Warning

Only trained and qualified personnel should be allowed to install, replace, or service this equipment.


بيان 1047—منع الحرارة الزائدة


تحذير

لتقليل خطر حدوث حريق أو إصابة جسدية، لا تشغّلها في منطقة تتجاوز الحد الأقصى لدرجة الحرارة المحيطة المُوصى بها:


Statement 1073—No User-Serviceable Parts


Warning

No serviceable parts inside. To avoid risk of electric shock, do not open.


بيان 1076—إزالة الأشياء الموجودة حول فتحات التهوية


تحذير

للحد من مخاطر نشوب الحريق، قم بإخلاء المجال حول فتحات التهوية حتى تصبح على الأقل:


بيان 1015—معالجة البطارية


تحذير

لتقليل خطر حدوث حريق أو انفجار أو تسرب سائل أو غاز قابل للاشتعال،

• قم باستبدال البطارية بالنوع ذاته أو النوع المكافئ الموصى به من الشركة المصنعة.

• لا تقم بفك الوصلات الخارجية القصيرة، أو سحقها، أو ثقبها، أو استخدام أداة حادة لإزالتها، أو التخلص منها بإحراقها

• لا تستخدمها في حال كانت البطارية مشوهة أو منتفخة

• لا تقم بتخزين البطارية أو استخدامها في درجة الحرارة > 20 A درجة مئوية

• لا تقم بتخزين البطارية أو استخدامها في بيئة ضغط جوي منخفض < 20 A


Statement 1024—Ground Conductor


Warning

This equipment must be grounded. To reduce the risk of electric shock, never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available.


Statement 1046—Installing or Replacing the Unit


Warning

To reduce risk of electric shock, when installing or replacing the unit, the ground connection must always be made first and disconnected last.


Statement 1040—Product Disposal


Warning

Ultimate disposal of this product should be handled according to all national laws and regulations.


Statement 1006—Chassis Warning for Rack-Mounting and Servicing


Warning

To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the system remains stable. The following guidelines are provided to ensure your safety:

  • This unit should be mounted at the bottom of the rack if it is the only unit in the rack.

  • When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component at the bottom of the rack.

  • If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack.


بيان 1079—سطح ساخن


تحذير

سطح ساخن. توخَ الحذر عند العمل بالقرب من الأسطح الساخنة.


Statement 1071—Warning Definition


Warning

IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device.

SAVE THESE INSTRUCTIONS

This image 369849_2.jpg is not available in preview/cisco.com


بيان 1008—الفئة الأولى من منتج الليزر


تحذير

الفئة الأولى من منتج الليزر.


Statement 1074—Comply with Local and National Electrical Codes


Warning

To reduce risk of electric shock or fire, installation of the equipment must comply with local and national electrical codes.