S Show Commands

show san-port-channel compatibility-parameters

show san-port-channel compatibility-parameters [ __readonly__ [ { TABLE_compatibility_params <parameter> <description> } ] ]

Syntax Description


show	Show running system information
san-port-channel	Show san-port-channel information
compatibility-parameters	Show san-port-channel compatibility-parameters
__readonly__	(Optional) Read Only
TABLE_compatibility_params	(Optional) Table with compatibility params
parameter	(Optional) Compatibity parameter
description	(Optional) Parameter description

Command Mode

/exec

show san-port-channel consistency

show san-port-channel consistency [ __readonly__ [ <msg> ] [ { [ <error_msg> ] [ <consistency_state> ] [ <module> ] [ { TABLE_inconsistent_database [ <database> ] [ { [ <total_port_channels> ] [ { TABLE_san_port_channel_database [ <interface> ] [ <total_ports> ] [ <first_operational_port> ] [ { TABLE_san_port_channel_member <port> <state> } ] [ <db_error_str> ] } ] } ] } ] } ] ]

Syntax Description


show	Show running system information
san-port-channel	Show san-port-channel information
consistency	Show san-port-channel distributed database consistency
__readonly__	(Optional) Read Only
msg	(Optional) Message string
error_msg	(Optional) Prints consistency errors, if any
consistency_state	(Optional) Consistency state
module	(Optional) Module no
TABLE_inconsistent_database	(Optional) Table with details of inconsistent dbs
database	(Optional) Inconsistent database
TABLE_san_port_channel_database	(Optional) san-po Table
total_port_channels	(Optional) Total port channels
interface	(Optional) san-port-channel interface
first_operational_port	(Optional) First oper port in san-po
total_ports	(Optional) Total number of ports in the san-po
TABLE_san_port_channel_member	(Optional) san-po member Table
port	(Optional) san-po member port
state	(Optional) san-po member port state
db_error_str	(Optional) prints cmd errors, if any

Command Mode

/exec

show san-port-channel consistency detail

show san-port-channel consistency detail [ __readonly__ [ <sup_total_port_channels> ] [ { [ <sup_db_error_str> ] [ { TABLE_sup_san_port_channel_database <sup_interface> [ <sup_total_ports> ] [ <sup_first_operational_port> ] [ { TABLE_sup_san_port_channel_member <sup_port> <sup_state> } ] } ] } ] [ <msg> ] [ { [ <error_msg> ] [ <db_index> ] [ <module> ] [ { [ <total_port_channels> ] [ { TABLE_san_port_channel_database [ <interface> ] [ <total_ports> ] [ <first_operational_port> ] [ { TABLE_san_port_channel_member <port> <state> } ] [ <db_error_str> ] } ] } ] } ] [ <consistency_state> ] ]

Syntax Description


show	Show running system information
san-port-channel	Show san-port-channel information
consistency	Show san-port-channel distributed database consistency
detail	Show san-port-channel distributed databases of all modules
__readonly__	(Optional) Read Only
sup_total_port_channels	(Optional) Authoritative po db - Total POs
TABLE_sup_san_port_channel_database	(Optional) Table with details of auth po db
sup_interface	(Optional) san-port-channel interface
sup_first_operational_port	(Optional) First oper port in san-po
sup_total_ports	(Optional) Total number of ports in the san-po
TABLE_sup_san_port_channel_member	(Optional) san-po member Table
sup_port	(Optional) san-po member port
sup_state	(Optional) san-po member port state
sup_db_error_str	(Optional) prints cmd errors, if any
msg	(Optional) Msg string
error_msg	(Optional) Prints errors, if any
db_index	(Optional) Database index
module	(Optional) Module no
total_port_channels	(Optional) Authoritative po db - Total POs
TABLE_san_port_channel_database	(Optional) Table with details of auth po db
interface	(Optional) san-port-channel interface
first_operational_port	(Optional) First oper port in san-po
total_ports	(Optional) Total number of ports in the san-po
TABLE_san_port_channel_member	(Optional) san-po member Table
port	(Optional) san-po member port
state	(Optional) san-po member port state
db_error_str	(Optional) prints cmd errors, if any
consistency_state	(Optional) Consistency state

Command Mode

/exec

show san-port-channel database

show san-port-channel database [ interface <ifid> | all ] [ __readonly__ [ <error_str> ] [ { TABLE_san_port_channel_database <interface> <admin_chan_mode> <oper_chan_mode> <last_membership_update> [ <last_membership_update_fail_reason> ] [ <pcm_interface_flag> ] [ <vlan_interfaces> ] [ <first_operational_port> ] [ <total_ports> ] [ <total_oper_ports> ] [ { TABLE_san_port_channel_member <port> <state> } ] } ] [ <cmd_error_str> ] ]

Syntax Description


show	Show running system information
san-port-channel	Show san-port-channel information
database	Show san-port-channel database
interface	(Optional) Specify a port-channel
ifid	(Optional)
all	(Optional) Display all port-channel
__readonly__	(Optional) Read Only
error_str	(Optional) Prints errors,if any
TABLE_san_port_channel_database	(Optional) san-port-channel database Table
interface	(Optional) san-po Interface
admin_chan_mode	(Optional) san-po administrative channel mode
oper_chan_mode	(Optional) san-po operational channel mode
last_membership_update	(Optional) Last membership update status
last_membership_update_fail_reason	(Optional) Membership update status casue
pcm_interface_flag	(Optional) san-po interface flag
vlan_interfaces	(Optional) san-po vlan interfaces
first_operational_port	(Optional) First oper port in san-po
total_ports	(Optional) Total number of ports in the san-po
total_oper_ports	(Optional) Total oper ports in the san-po
TABLE_san_port_channel_member	(Optional) san-po member Table
port	(Optional) san-po member port
state	(Optional) san-po member port state
cmd_error_str	(Optional) prints cmd errors,if any

Command Mode

/exec

show san-port-channel summary

show san-port-channel summary [ __readonly__ [ { TABLE_san_port_channel_summary <interface> <total_ports> <total_oper_ports> <first_operational_port> } ] [ <cmd_error_str> ] ]

Syntax Description


show	Show running system information
san-port-channel	Show san-port-channel information
summary	Show san-port-channel summary
__readonly__	(Optional) Read Only
TABLE_san_port_channel_summary	(Optional) san-port-channel Summary Table
interface	(Optional) san-po Interface
total_ports	(Optional) Total number of ports in the san-po
total_oper_ports	(Optional) Total oper ports in the san-po
first_operational_port	(Optional) First oper port in san-po
cmd_error_str	(Optional) Prints cmd error,if any

Command Mode

/exec

show san-port-channel usage

show san-port-channel usage [ __readonly__ [ <total_channel_numbers_used> { <used_range> } + { <unused_range> } + ] [ <error_str> ] ]

Syntax Description


show	Show running system information
san-port-channel	Show san-port-channel information
usage	Show san-port-channel usages
__readonly__	(Optional) Read Only
total_channel_numbers_used	(Optional) Total used number of port-channels
used_range	(Optional) Used range
unused_range	(Optional) Un-used range
error_str	(Optional) Prints error if any

Command Mode

/exec

show scheduler config

show scheduler config [ __readonly__ [ <terminal> ] [ <feature> ] [ <logfilesize> ] [ <emailfrom> ] [ <emailreplyto> ] [ <smtpserver> ] [ <port> ] [ <usevrf> ] [ { TABLE_userconfig <username> [ <password> ] } ] [ { TABLE_jobconfig <jobdata> } ] [ { TABLE_scheduleconfig <schedulename> [ <scheduletype> ] [ { TABLE_jobs <status> } ] [ <email> ] } ] ]

Syntax Description


show	Show running system information
scheduler	Show scheduler config or data
config	Display scheduler config
__readonly__	(Optional)
terminal	(Optional) logfile terminal
feature	(Optional) name service
logfilesize	(Optional) logfilesize
emailfrom	(Optional) emailfrom
emailreplyto	(Optional) emailreplyto
smtpserver	(Optional) smtpserver
port	(Optional) port
usevrf	(Optional) usevrf
TABLE_userconfig	(Optional) userconfig
username	(Optional) username
password	(Optional) password
TABLE_jobconfig	(Optional) job configs
jobdata	(Optional) jobdata
TABLE_scheduleconfig	(Optional) schedule configs
schedulename	(Optional) schedulename
scheduletype	(Optional) scheduletype
TABLE_jobs	(Optional) jobs
status	(Optional) status
email	(Optional) email

Command Mode

/exec

show scheduler job

show scheduler job [ name <s0> ] [ __readonly__ [ { TABLE_schedulerjobs <jobname> [ <jobdata> ] } ] ]

Syntax Description


show	Show running system information
scheduler	Show scheduler config or data
job	Display job information
name	(Optional) Specify the name of job
s0	(Optional) Specify the job name
__readonly__	(Optional)
TABLE_schedulerjobs	(Optional) schedulerjobs
jobname	(Optional) job name
jobdata	(Optional) job data

Command Mode

/exec

show scheduler logfile

show scheduler logfile [ __readonly__ [ { TABLE_joblog <jobname> [ <jobstatus> ] [ <schedulename> ] [ <scheduleusername> ] [ <completiontime> ] [ <joboutput> ] } ] ]

Syntax Description


show	Show running system information
scheduler	Show scheduler config or data
logfile	Display scheduler job output log
__readonly__	(Optional)
TABLE_joblog	(Optional) jobs log
jobname	(Optional) job name
jobstatus	(Optional) job status
schedulename	(Optional) schedulename
scheduleusername	(Optional) scheduleusername
completiontime	(Optional) completiontime
joboutput	(Optional) joboutput

Command Mode

/exec

show scheduler schedule

show scheduler schedule [ name <s0> ] [ __readonly__ [ { TABLE_schedules <schedulename> [ <scheduleusername> ] [ <scheduletype> ] [ <starttime> ] [ <lastexectime> ] [ <lastcompletiontime> ] [ <execcount> ] [ <jobcount> ] [ { TABLE_jobs <jobname> [ <execstatus> ] } ] } ] ]

Syntax Description


show	Show running system information
scheduler	Show scheduler config or data
schedule	Display schedule information
name	(Optional) Specify the name of schedule
s0	(Optional) Specify the schedule name
__readonly__	(Optional)
TABLE_schedules	(Optional) schedules
schedulename	(Optional) Schedule name
scheduleusername	(Optional) schedule username
scheduletype	(Optional) scheduletype
starttime	(Optional) starttime
lastexectime	(Optional) last exec time
lastcompletiontime	(Optional) lastcompletiontime
execcount	(Optional) execcount
jobcount	(Optional) jobcount
TABLE_jobs	(Optional) jobs
jobname	(Optional) jobname
execstatus	(Optional) execstatus

Command Mode

/exec

show segment-routing

show segment-routing [ detail ] [ __readonly__ <srvname> <state> <process_id> [ <srgb_min_label> <srgb_max_label> <srgb_alloc_status> [ <oper_srgb_min_label> <oper_srgb_max_label> ] <cleanup_intvl> <retry_intvl> [ <num_retries> ] [ <srgb_alloc_hdl> ] [ <cleanup_timer_state> <retry_timer_state> ] ] [ <ulib_reg_status> [ <ulib_pib_hdl> ] ] ]

Syntax Description


show	Show running system information
segment-routing	Show segment-routing status info
detail	(Optional) Show detailed information
__readonly__	(Optional)
srvname	(Optional) Service name
state	(Optional) Process state
process_id	(Optional) Process id
srgb_min_label	(Optional) Configured SRGB min label
srgb_max_label	(Optional) Configured SRGB max label
srgb_alloc_status	(Optional) SRGB allocation status
oper_srgb_min_label	(Optional) Operational SRGB min label
oper_srgb_max_label	(Optional) Operational SRGB max label
cleanup_intvl	(Optional) SRGB cleanup interval
retry_intvl	(Optional) SRGB alloc retry interval
num_retries	(Optional) SRGB alloc retries done
srgb_alloc_hdl	(Optional) SRGB alloc handle
cleanup_timer_state	(Optional) SRGB cleanup timer state
retry_timer_state	(Optional) SRGB retry timer state
ulib_reg_status	(Optional) ULIB registation done
ulib_pib_hdl	(Optional) ULIB PIB handle

Command Mode

/exec

show segment-routing clients

show segment-routing clients [ __readonly__ [ { TABLE_client <client_pib_name> <client_pib_index> <client_uuid> <client_pid> <client_sap> [ { TABLE_tib <vrf_name> <tib_name> [ <pfxsid_cleanup_status> ] } ] } ] <total_clients> ]

Syntax Description


show	Show running system information
segment-routing	Show segment-routing status info
clients	Show client info
__readonly__	(Optional)
TABLE_client	(Optional)
client_pib_name	(Optional) Client name
client_pib_index	(Optional) Client pib index
client_uuid	(Optional) Client UUID
client_pid	(Optional) Client PID
client_sap	(Optional) Client SAP
TABLE_tib	(Optional)
vrf_name	(Optional) VRF name
tib_name	(Optional) Table name
pfxsid_cleanup_status	(Optional) Prefixsid Cleanup Pending?
total_clients	(Optional) Total number of clients

Command Mode

/exec

show segment-routing ipv4 connected-prefix-sid-map

show segment-routing ipv4 connected-prefix-sid-map [ __readonly__ [ { TABLE_tib <vrf_name> <tib_name> [ { TABLE_pfxsid <prefix> <index> <absolute> <range> <valid> } ] } ] ]

Syntax Description


show	Show running system information
segment-routing	Show segment-routing status info
ipv4	Show info for IPv4 address-family
connected-prefix-sid-map	Show prefix-sid mapping
__readonly__	(Optional)
TABLE_tib	(Optional)
vrf_name	(Optional) Vrf name
tib_name	(Optional) Table name
TABLE_pfxsid	(Optional)
prefix	(Optional) Prefix
index	(Optional) Segment ID
absolute	(Optional) Segment ID is absolute?
range	(Optional) Range of Segment IDs from index
valid	(Optional) Segment ID is valid?

Command Mode

/exec

show segment-routing mpls

show segment-routing mpls [ detail ] [ __readonly__ <srvname> <state> <process_id> [ <srgb_min_label> <srgb_max_label> <srgb_alloc_status> [ <oper_srgb_min_label> <oper_srgb_max_label> ] <cleanup_intvl> <retry_intvl> [ <num_retries> ] [ <srgb_alloc_hdl> ] [ <cleanup_timer_state> <retry_timer_state> ] ] [ <ulib_reg_status> [ <ulib_pib_hdl> ] ] ]

Syntax Description


show	Show running system information
segment-routing	Show segment-routing status info
mpls	Show segment-routing mpls info
detail	(Optional) Show detailed information
__readonly__	(Optional)
srvname	(Optional) Service name
state	(Optional) Process state
process_id	(Optional) Process id
srgb_min_label	(Optional) Configured SRGB min label
srgb_max_label	(Optional) Configured SRGB max label
srgb_alloc_status	(Optional) SRGB allocation status
oper_srgb_min_label	(Optional) Operational SRGB min label
oper_srgb_max_label	(Optional) Operational SRGB max label
cleanup_intvl	(Optional) SRGB cleanup interval
retry_intvl	(Optional) SRGB alloc retry interval
num_retries	(Optional) SRGB alloc retries done
srgb_alloc_hdl	(Optional) SRGB alloc handle
cleanup_timer_state	(Optional) SRGB cleanup timer state
retry_timer_state	(Optional) SRGB retry timer state
ulib_reg_status	(Optional) ULIB registation done
ulib_pib_hdl	(Optional) ULIB PIB handle

Command Mode

/exec

show segment-routing mpls clients

show segment-routing mpls clients [ __readonly__ [ { TABLE_client <client_pib_name> <client_pib_index> <client_uuid> <client_pid> <client_sap> [ { TABLE_tib <vrf_name> <tib_name> [ <pfxsid_cleanup_status> ] } ] } ] <total_clients> ]

Syntax Description


show	Show running system information
segment-routing	Show segment-routing status info
mpls	Show segment-routing mpls info
clients	Show client info
__readonly__	(Optional)
TABLE_client	(Optional)
client_pib_name	(Optional) Client name
client_pib_index	(Optional) Client pib index
client_uuid	(Optional) Client UUID
client_pid	(Optional) Client PID
client_sap	(Optional) Client SAP
TABLE_tib	(Optional)
vrf_name	(Optional) VRF name
tib_name	(Optional) Table name
pfxsid_cleanup_status	(Optional) Prefixsid Cleanup Pending?
total_clients	(Optional) Total number of clients

Command Mode

/exec

show segment-routing mpls ipv4 connected-prefix-sid-map

show segment-routing mpls ipv4 connected-prefix-sid-map [ __readonly__ [ { TABLE_tib <vrf_name> <tib_name> [ { TABLE_pfxsid <prefix> <index> <absolute> <range> <valid> } ] } ] ]

Syntax Description


show	Show running system information
segment-routing	Show segment-routing status info
mpls	Show segment-routing mpls info
ipv4	Show info for IPv4 address-family
connected-prefix-sid-map	Show prefix-sid mapping
__readonly__	(Optional)
TABLE_tib	(Optional)
vrf_name	(Optional) Vrf name
tib_name	(Optional) Table name
TABLE_pfxsid	(Optional)
prefix	(Optional) Prefix
index	(Optional) Segment ID
absolute	(Optional) Segment ID is absolute?
range	(Optional) Range of Segment IDs from index
valid	(Optional) Segment ID is valid?

Command Mode

/exec

show sflow

show sflow [ __readonly__ <sampling-rate> <max-sampled-size> <counter-poll-interval> <max-datagram-size> <collector-vrf> <collector-ip> [ <source-ip> ] <collector-port> <agent-ip> [ <data-source-interface> ] ]

Syntax Description


show	Show running system information
sflow	Display sFlow global configuration
__readonly__	(Optional) Read only
sampling-rate	(Optional) Sampling Rate
max-sampled-size	(Optional) Max Sampled Size
counter-poll-interval	(Optional) Counter Poll Interval
max-datagram-size	(Optional) Max Datagram Size
collector-vrf	(Optional) Collector VRF
collector-ip	(Optional) Collector IP
source-ip	(Optional) Source IP
collector-port	(Optional) Collector Port
agent-ip	(Optional) Agent IP
data-source-interface	(Optional) Data Source Interface

Command Mode

/exec

show sflow statistics

show sflow statistics [ __readonly__ <total-packets> <total-samples> <processed-samples> <dropped-samples> [ <rate-limiter-drops> ] [ <dropped-sflow-samples> ] <sent-datagrams> <dropped-datagrams> ]

Syntax Description


show	Show running system information
sflow	Display sFlow global configuration
statistics	Display sFlow statistics
__readonly__	(Optional) Read only
total-packets	(Optional) Total Packets
total-samples	(Optional) Total Samples
processed-samples	(Optional) Processed Samples
dropped-samples	(Optional) Dropped Samples
rate-limiter-drops	(Optional) Rate-Limiter Drops
dropped-sflow-samples	(Optional) Dropped sflow Samples
sent-datagrams	(Optional) Sent Datagrams
dropped-datagrams	(Optional) Dropped Datagrams

Command Mode

/exec

show smart-channel

show smart-channel <svc-name> [ brief ] [ __readonly__ <is_firstentry> <is_detail> <is_active> <is_firstentry_routemap> <is_firstentry_standby> <is_firstentry_acl> <is_lastentry> [ TABLE_summary <service_name> <lb_scheme> [ <interface> ] <state> <buckets> [ <reason> ] <vrf_name> <userACL> [ TABLE_device <device_grp> <dg_probe> <dg_probe_port> ] [ TABLE_route_map [ <route_map> ] [ <interface> ] [ <r_status> ] [ <int_track_id> ] ] [ TABLE_vip [ <vip_ip> ] [ <vip_probe> ] [ <vip_port> ] [ TABLE_vip_node [ <vip_node> ] [ <vip_nodev6> ] <vip_config> <vip_weight> <vip_node_probe> <vip_node_probe_port> <vip_node_probe_ip> <vip_status> <vip_track_id> <vip_ip_sla_id> [ TABLE_vip_standby [ <vip_standby_ip> ] [ <vip_standby_ipv6> ] <vip_standby_config> <vip_standby_weight> <vip_standby_probe> <vip_standby_probe_port> <vip_standby_probe_ip> <vip_standby_status> <vip_standby_track_id> <vip_standby_sla_id> ] [ TABLE_vip_acl [ <vip_access_list> ] ] ] ] [ TABLE_node [ <node> ] [ <nodev6> ] <config> <weight> <node_probe> <node_probe_port> <node_probe_ip> <status> <track_id> <ip_sla_id> [ TABLE_standby [ <standby_ip> ] [ <standby_ipv6> ] <standby_config> <standby_weight> <standby_probe> <standby_probe_port> <standby_probe_ip> <standby_status> <standby_track_id> <standby_sla_id> ] [ TABLE_acl [ <access_list> ] ] ] ] ]

Syntax Description


show	Show running system information
smart-channel	smart channel
svc-name	smart channel name
brief	(Optional) brief
__readonly__	(Optional) Read Only
is_firstentry	(Optional)
is_detail	(Optional)
is_active	(Optional)
is_firstentry_routemap	(Optional)
is_firstentry_acl	(Optional)
is_lastentry	(Optional)
is_firstentry_standby	(Optional)
TABLE_summary	(Optional)
service_name	(Optional) service_name
lb_scheme	(Optional) lb scheme
interface	(Optional) interface
state	(Optional) state
buckets	(Optional) buckets
reason	(Optional) inactive reason
vrf_name	(Optional) VRF-Name
userACL	(Optional) user access-list
TABLE_device	(Optional)
device_grp	(Optional) service device group
dg_probe	(Optional) probe type
dg_probe_port	(Optional) probe port
TABLE_route_map	(Optional)
route_map	(Optional) service route map
interface	(Optional) interface
r_status	(Optional) route map status
int_track_id	(Optional) interface track id
TABLE_vip	(Optional)
vip_ip	(Optional) vip ip
vip_probe	(Optional) vip protocol
vip_port	(Optional) vip port
TABLE_vip_node	(Optional)
vip_node	(Optional) service node ip
vip_nodev6	(Optional) service node IPv6
vip_config	(Optional) node config
vip_weight	(Optional) node weight
vip_status	(Optional) node status
vip_node_probe	(Optional) node probe type
vip_node_probe_port	(Optional) node probe port
vip_node_probe_ip	(Optional) node probe ip
vip_track_id	(Optional) node track id
vip_ip_sla_id	(Optional) node ip sla id
TABLE_vip_standby	(Optional)
vip_standby_ip	(Optional) standby node ip
vip_standby_ipv6	(Optional) standby node ipv6
vip_standby_config	(Optional) standby node config
vip_standby_weight	(Optional) standby node weight
vip_standby_status	(Optional) standby node status
vip_standby_probe	(Optional) standby node probe type
vip_standby_probe_port	(Optional) standby node probe port
vip_standby_probe_ip	(Optional) standby node probe ip
vip_standby_track_id	(Optional) standby node track id
vip_standby_sla_id	(Optional) standby node sla id
TABLE_vip_acl	(Optional)
vip_access_list	(Optional) access list
TABLE_node	(Optional)
node	(Optional) service node ip
nodev6	(Optional) service node IPv6
config	(Optional) node config
weight	(Optional) node weight
status	(Optional) node status
node_probe	(Optional) node probe type
node_probe_port	(Optional) node probe port
node_probe_ip	(Optional) node probe ip
track_id	(Optional) node track id
ip_sla_id	(Optional) node ip sla id
TABLE_standby	(Optional)
standby_ip	(Optional) standby node ip
standby_ipv6	(Optional) standby node ipv6
standby_config	(Optional) standby node config
standby_weight	(Optional) standby node weight
standby_status	(Optional) standby node status
standby_probe	(Optional) standby node probe type
standby_probe_port	(Optional) standby node probe port
standby_probe_ip	(Optional) standby node probe ip
standby_track_id	(Optional) standby node track id
standby_sla_id	(Optional) standby node sla id
TABLE_acl	(Optional)
access_list	(Optional) access list

Command Mode

/exec

show snapshots

show snapshots [ __readonly__ TABLE_snapshot <snap_name> <snap_ctime> <description> ]

Syntax Description


show	Show running system information
snapshots	Snapshots present on the switch
__readonly__	(Optional)
TABLE_snapshot	(Optional)
snap_name	(Optional) snapshot name
snap_ctime	(Optional) snapshot create time
description	(Optional) snapshot description

Command Mode

/exec

show snapshots compare

show snapshots compare <snapshot-name-T1> <snapshot-name-T2> [ __readonly__ TABLE_feature <feat_name> [ <feat_state1> <feat_state2> ] [ TABLE_element <elemkey1> <elemval1> [ <elemkey2> <elemval2> ] [ <elemkey3> <elemval3> ] [ <elemkey4> <elemval4> ] [ <elemstate1> <elemstate2> ] [ TABLE_value <tag> <val1> <val2> ] [ TABLE_subrow <subrowkey> <subrowval> [ <substate1> <substate2> ] [ TABLE_subvalue <tag> <val1> <val2> ] ] ] ]

Syntax Description


show	Show running system information
snapshots	Snapshots present on the switch
compare	Compare two snapshots
snapshot-name-T1	Name of a snapshot taken at interval T1
snapshot-name-T2	Name of a snapshot taken at interval T2
__readonly__	(Optional)
TABLE_feature	(Optional)
feat_name	(Optional) feature name
feat_state1	(Optional) feature state in snapshot1
feat_state2	(Optional) feature state in snapehot2
TABLE_element	(Optional)
elemkey1	(Optional) element key1
elemval1	(Optional) element value1
elemkey2	(Optional) element key2
elemval2	(Optional) element value2
elemkey3	(Optional) element key3
elemval3	(Optional) element value3
elemkey4	(Optional) element key4
elemval4	(Optional) element value4
elemstate1	(Optional) element state in snapshot 1
elemstate2	(Optional) element state in snapshot 2
TABLE_value	(Optional)
tag	(Optional) element tag
val1	(Optional) element value for tag in snapshot1
val2	(Optional) element value for tag in snapshot2
TABLE_subrow	(Optional)
subrowkey	(Optional) subrow key
subrowval	(Optional) subrow value
substate1	(Optional) subrow state in snapshot 1
substate2	(Optional) subrow state in snapshot 2
TABLE_subvalue	(Optional)
tag	(Optional) subrow tag
val1	(Optional) subrow value for tag in snapshot1
val2	(Optional) subrow value for tag in snapshot2

Command Mode

/exec

show snapshots compare ipv4routes

show snapshots compare <snapshot-name-T1> <snapshot-name-T2> ipv4routes [ __readonly__ TABLE_summary <item_desc> <summary_val1> <summary_val2> [ <changed> ] [ TABLE_prefix <prefix> <missing_snapshot> ] ]

Syntax Description


show	Show running system information
snapshots	Snapshots present on the switch
compare	Comapre two snapshots
snapshot-name-T1	Name of a snapshot taken at interval T1
snapshot-name-T2	Name of a snapshot taken at interval T2
ipv4routes	Compare ipv4 route information
__readonly__	(Optional)
TABLE_summary	(Optional)
item_desc	(Optional) item description
summary_val1	(Optional) summary value in snapshot1
summary_val2	(Optional) summary value in snapehot2
changed	(Optional) changed flag
TABLE_prefix	(Optional)
prefix	(Optional) route prefix
missing_snapshot	(Optional) missing in snapshot name

Command Mode

/exec

show snapshots compare ipv6routes

show snapshots compare <snapshot-name-T1> <snapshot-name-T2> ipv6routes [ __readonly__ TABLE_summary <item_desc> <summary_val1> <summary_val2> [ <changed> ] [ TABLE_prefix <prefix> <missing_snapshot> ] ]

Syntax Description


show	Show running system information
snapshots	Snapshots present on the switch
compare	Comapre two snapshots
snapshot-name-T1	Name of a snapshot taken at interval T1
snapshot-name-T2	Name of a snapshot taken at interval T2
ipv6routes	Compare ipv6 route information
__readonly__	(Optional)
TABLE_summary	(Optional)
item_desc	(Optional) item description
summary_val1	(Optional) summary value in snapshot1
summary_val2	(Optional) summary value in snapehot2
changed	(Optional) changed flag
TABLE_prefix	(Optional)
prefix	(Optional) route prefix
missing_snapshot	(Optional) missing in snapshot name

Command Mode

/exec

show snapshots compare summary

show snapshots compare <snapshot-name-T1> <snapshot-name-T2> summary [ __readonly__ TABLE_summary <item_desc> <summary_val1> <summary_val2> [ <changed> ] ]

Syntax Description


show	Show running system information
snapshots	Snapshots present on the switch
compare	Comapre two snapshots
snapshot-name-T1	Name of a snapshot taken at interval T1
snapshot-name-T2	Name of a snapshot taken at interval T2
summary	Compare summary information
__readonly__	(Optional)
TABLE_summary	(Optional)
item_desc	(Optional) item description
summary_val1	(Optional) summary value in snapshot1
summary_val2	(Optional) summary value in snapehot2
changed	(Optional) changed flag

Command Mode

/exec

show snapshots dump

show snapshots dump <snapshot-name> <section-name> [ __readonly__ TABLE_snapshot <file_name> <snap_name> ]

Syntax Description


show	Show running system information
snapshots	Snapshots present on the switch
dump	Dump contents of snapshot
snapshot-name	Name of a snapshot
section-name	Name of snapshot section
__readonly__	(Optional)
TABLE_snapshot	(Optional)
file_name	(Optional) snapshot XML file name
snap_name	(Optional) snapshot name

Command Mode

/exec

show snapshots dump

show snapshots dump <snapshot-name> [ __readonly__ TABLE_snapshot <file_name> <snap_name> ]

Syntax Description


show	Show running system information
snapshots	Snapshots present on the switch
dump	Dump contents of snapshot
snapshot-name	Name of a snapshot
__readonly__	(Optional)
TABLE_snapshot	(Optional)
file_name	(Optional) snapshot XML file name
snap_name	(Optional) snapshot name

Command Mode

/exec

show snapshots sections

show snapshots sections [ __readonly__ TABLE_snapsection <sectname> <sectcmd> <sectrow> <sectkey1> <sectkey2> ]

Syntax Description


show	Show running system information
snapshots	Snapshots present on the switch
sections	User-specified snapshot sections
__readonly__	(Optional)
TABLE_snapsection	(Optional)
sectname	(Optional) snapshot section name
sectcmd	(Optional) snapshot section show command
sectrow	(Optional) snapshot section row id
sectkey1	(Optional) snapshot section key1
sectkey2	(Optional) snapshot section key2

Command Mode

/exec

show snmp

show snmp [ __readonly__ <sys_contact> <sys_location> <snmp_input_packets> <bad_snmp_version> <unknown_community_name> <illegal_community_name> <encoding_Err> <req_var_nums> <alt_var_nums> <get_req_in> <getnext_req_in> <set_req_in> <noname_pdu_in> <badval_pdu_in> <ro_pdu_in> <genral_err_in> <get_resp_in> <unknown_ctx> <snmp_output_packets> <trap_pdu> <toobig_err> <noname_pdu_out> <badval_pdu_out> <genral_err_out> <get_req_out> <getnext_req_out> <set_req_out> <get_resp_out> <silent_drops> [ <max_pkt_size> ] [ { TABLE_snmp_community <community_name> <grouporaccess> <context> <aclfilter> } ] [ { TABLE_snmp_users <user> <auth> <priv> [ { TABLE_groups <group> } ] [ <acl_filter> ] [ <engineID> ] } ] <tcp_auth_status> [ <port_mon_status> [ <policy_name> <pol_admin_status> <plo_oper_status> <pol_port_type> [ TABLE_policies <counter> <threshold> <interval> <rising_threshold> <rising_event> <falling_threshold> <falling_event> <pmon_config> ] ] ] [ <protocol_status> ] [ { TABLE_snmp_contexts <context_name> <proto_instanceid> <vrf> <topology> [ <vlan> | <MST> ] } ] ]

Syntax Description


show	Show running system information
snmp	show snmp information
__readonly__	(Optional) Read Only
TABLE_snmp_community	(Optional) Table that displays the community information
TABLE_snmp_users	(Optional) Table that displays the user information
TABLE_groups	(Optional) Table that displays the group information
TABLE_policies	(Optional) Table that displays the policy information
TABLE_snmp_contexts	(Optional) Table that displays the context information
sys_contact	(Optional) System Contact
sys_location	(Optional) System Location
snmp_input_packets	(Optional) SNMP input packets
bad_snmp_version	(Optional) bad snmp version in Input SNMP packets
unknown_community_name	(Optional) unknown community name in Input SNMP packets
illegal_community_name	(Optional) Illegal community name in Input SNMP packets
encoding_Err	(Optional) Encoding Errors in Input SNMP packets
req_var_nums	(Optional) number of requested variables
alt_var_nums	(Optional) number of altered variable
get_req_in	(Optional) GET request in Input SNMP packets
getnext_req_in	(Optional) GET-NEXT request in Input SNMP packets
set_req_in	(Optional) SET request in Input SNMP packets
noname_pdu_in	(Optional) NONAME PDU in Input SNMP packets
badval_pdu_in	(Optional) Bad value PDU in Input SNMP packets
ro_pdu_in	(Optional) Read only PDU in Input SNMP packets
genral_err_in	(Optional) Genral Error in Input SNMP packets
get_resp_in	(Optional) Get Response PDU in Input SNMP packets
unknown_ctx	(Optional) Unknown context Name in Input SNMP packets
snmp_output_packets	(Optional) SNMP Output Packets
trap_pdu	(Optional) Trap PDU in Output SNMP Packets
toobig_err	(Optional) Too Big errors in Output SNMP Packets
noname_pdu_out	(Optional)
badval_pdu_out	(Optional) NoName PDU in Output SNMP Packets
genral_err_out	(Optional) Genral Error in Output SNMP Packets
get_req_out	(Optional) GET request in Output SNMP Packets
getnext_req_out	(Optional) GET-NEXTrequest in Output SNMP Packets
set_req_out	(Optional) SET request in Output SNMP packets
get_resp_out	(Optional) Get Response PDU in Output SNMP Packets
silent_drops	(Optional) Silent Drop packets
max_pkt_size	(Optional) Maximum packet size
community_name	(Optional) community name
grouporaccess	(Optional) Group name
context	(Optional) contaxt Name
aclfilter	(Optional) Acl filter name
user	(Optional) User name
auth	(Optional) Auth type
priv	(Optional) Priv Type
group	(Optional) Group name
acl_filter	(Optional) acl filter
engineID	(Optional) engine id for the user
tcp_auth_status	(Optional) TCP authentication status
port_mon_status	(Optional) Port monitor status
policy_name	(Optional) policy name
pol_admin_status	(Optional) Policy Admin status
plo_oper_status	(Optional) Police oper status
pol_port_type	(Optional) policy port type
counter	(Optional) counters
threshold	(Optional) Threshold
interval	(Optional) Interval
rising_threshold	(Optional) Rising threshold
rising_event	(Optional) Rising Event
falling_threshold	(Optional) Falling threshold
falling_event	(Optional) Falling Event
pmon_config	(Optional) PMON configured
protocol_status	(Optional) Protocol Enable status
context_name	(Optional) context name
proto_instanceid	(Optional) Protocol instance ID
vrf	(Optional) VRF Name
topology	(Optional) Topology
vlan	(Optional) VLAN name
MST	(Optional) MST name

Command Mode

/exec

show snmp community

show snmp community [ __readonly__ { TABLE_snmp_community <community_name> <grouporaccess> <context> <aclfilter> } ]

Syntax Description


show	Show running system information
snmp	show snmp information
community	show snmp community strings
__readonly__	(Optional) Read Only
TABLE_snmp_community	(Optional) contains all snmp community names
community_name	(Optional) community name
grouporaccess	(Optional) group or access name
context	(Optional) context name
aclfilter	(Optional) acl filter name

Command Mode

/exec

show snmp context

show snmp context [ __readonly__ { TABLE_snmp_contexts <context_name> <proto_instanceid> <vrf> <topology> [ <vlan> | <MST> ] } ]

Syntax Description


show	Show running system information
snmp	show snmp information
context	show snmp context mapping entries
__readonly__	(Optional)
TABLE_snmp_contexts	(Optional) All SNMP Contexts Entries
context_name	(Optional) SNMP context Name
proto_instanceid	(Optional) Name of the protocol instance
vrf	(Optional) VRF name
topology	(Optional) Name of the Topology
vlan	(Optional) VLAN Name
MST	(Optional)

Command Mode

/exec

show snmp engineID

show snmp engineID [ __readonly__ <engineIDHex> <engineIDDec> ]

Syntax Description


show	Show running system information
snmp	show snmp information
engineID	show snmp engineID
__readonly__	(Optional)
engineIDHex	(Optional) SNMP engineID in HEX
engineIDDec	(Optional) SNMP engineID in Decimal

Command Mode

/exec

show snmp group

show snmp group [ __readonly__ { TABLE_role <role_name> <role_description> [ <attribute_scope> ] [ <permit_vsan> ] [ <permit_vlan> ] [ <permit_vlan_id> ] [ <permit_interface> ] [ <permit_interface_slot> ] [ <permit_vrf> ] [ TABLE_vrf<permit_vrf_name> ] [ { TABLE_rule [ <rule_num> ] [ <rule_action> ] { <rule_permission> | <rule_permission_mds> } [ <rule_featuretype> ] [ <rule_entity> ] } ] } ]

Syntax Description


show	Show running system information
snmp	show snmp information
group	show snmp group
__readonly__	(Optional) Read Only
TABLE_role	(Optional) Table displays role
role_name	(Optional) Role Name
role_description	(Optional) Role Description
attribute_scope	(Optional) Role scope
permit_vsan	(Optional) permitted vsan
permit_vlan	(Optional)
permit_vlan_id	(Optional)
permit_interface	(Optional)
permit_interface_slot	(Optional)
permit_vrf	(Optional)
TABLE_rule	(Optional)
rule_num	(Optional)
rule_action	(Optional)
rule_permission	(Optional)
rule_permission_mds	(Optional)
rule_featuretype	(Optional)
rule_entity	(Optional)

Command Mode

/exec

show snmp host

show snmp host [ __readonly__ { TABLE_host <host><port><version><level><type><secname> [ [ <vrf> ] [ TABLE_vrf_filters <vrf_filter> ] [ <src_intf> ] ] } ]

Syntax Description


show	Show running system information
snmp	show snmp information
host	show snmp hosts
__readonly__	(Optional) Read Only
TABLE_host	(Optional) displays the list of hosts configured for snmp requests
TABLE_vrf_filters	(Optional) displays the host vrf filters
vrf	(Optional) VRF Name
vrf_filter	(Optional) vrf filters
src_intf	(Optional) source interface

Command Mode

/exec

show snmp mib igmpCacheTable

show snmp mib igmpCacheTable [ <igmpCacheAddress-in> ] [ <igmpCacheIfIndex-in> ] [ __readonly__ TABLE_igmpCacheTable <igmpCacheAddress-out> <igmpCacheIfIndex-out> <igmpCacheSelf> <igmpCacheLastReporter> <igmpCacheUpTime> <igmpCacheExpiryTime> <igmpCacheStatus> <igmpCacheVersion1HostTimer> ]

Syntax Description


show	Show running system information
snmp	show snmp
mib	show mib tables
igmpCacheTable	show mib table igmpCacheTable
igmpCacheAddress-in	(Optional) igmpCacheAddress
igmpCacheIfIndex-in	(Optional) igmpCacheIfIndex
__readonly__	(Optional)
TABLE_igmpCacheTable	(Optional)
igmpCacheAddress-out	(Optional) mib table index igmpCacheAddress
igmpCacheIfIndex-out	(Optional) mib table index igmpCacheIfIndex
igmpCacheSelf	(Optional) mib object igmpCacheSelf
igmpCacheLastReporter	(Optional) mib object igmpCacheLastReporter
igmpCacheUpTime	(Optional) mib object igmpCacheUpTime
igmpCacheExpiryTime	(Optional) mib object igmpCacheExpiryTime
igmpCacheStatus	(Optional) mib object igmpCacheStatus
igmpCacheVersion1HostTimer	(Optional) mib object igmpCacheVersion1HostTimer

Command Mode

/exec

show snmp mib igmpInterfaceTable

show snmp mib igmpInterfaceTable [ <igmpInterfaceIfIndex-in> ] [ __readonly__ TABLE_igmpInterfaceTable <igmpInterfaceIfIndex-out> <igmpInterfaceQueryInterval> <igmpInterfaceStatus> <igmpInterfaceVersion> <igmpInterfaceQuerier> <igmpInterfaceQueryMaxResponseTime> <igmpInterfaceQuerierUpTime> <igmpInterfaceQuerierExpiryTime> <igmpInterfaceVersion1QuerierTimer> <igmpInterfaceWrongVersionQueries> <igmpInterfaceJoins> <igmpInterfaceProxyIfIndex> <igmpInterfaceGroups> <igmpInterfaceRobustness> <igmpInterfaceLastMembQueryIntvl> ]

Syntax Description


show	Show running system information
snmp	show snmp
mib	show mib tables
igmpInterfaceTable	show mib table igmpInterfaceTable
igmpInterfaceIfIndex-in	(Optional) igmpInterfaceIndex
__readonly__	(Optional)
TABLE_igmpInterfaceTable	(Optional)
igmpInterfaceIfIndex-out	(Optional) mib table index igmpInterfaceIfIndex
igmpInterfaceQueryInterval	(Optional) mib object igmpInterfaceQueryInterval
igmpInterfaceStatus	(Optional) mib object igmpInterfaceStatus
igmpInterfaceVersion	(Optional) mib object igmpInterfaceVersion
igmpInterfaceQuerier	(Optional) mib object igmpInterfaceQuerier
igmpInterfaceQueryMaxResponseTime	(Optional) mib object igmpInterfaceQueryMaxResponseTime
igmpInterfaceQuerierUpTime	(Optional) mib object igmpInterfaceQuerierUpTime
igmpInterfaceQuerierExpiryTime	(Optional) mib object igmpInterfaceQuerierExpiryTime
igmpInterfaceVersion1QuerierTimer	(Optional) mib object igmpInterfaceVersion1QuerierTimer
igmpInterfaceWrongVersionQueries	(Optional) mib object igmpInterfaceWrongVersionQueries
igmpInterfaceJoins	(Optional) mib object igmpInterfaceJoins
igmpInterfaceProxyIfIndex	(Optional) mib object igmpInterfaceProxyIfIndex
igmpInterfaceGroups	(Optional) mib object igmpInterfaceGroups
igmpInterfaceRobustness	(Optional) mib object igmpInterfaceRobustness
igmpInterfaceLastMembQueryIntvl	(Optional) mib object igmpInterfaceLastMembQueryIntvl

Command Mode

/exec

show snmp nms-statistics

show snmp nms-statistics [ __readonly__ <header> [ <nms_stats> ] ]

Syntax Description


show	Show running system information
snmp	Show snmp information
nms-statistics	Show SNMP NMS statistics
__readonly__	(Optional) Read Only
header	(Optional) NMS Statistics header
nms_stats	(Optional) NMS Statistics

Command Mode

/exec

show snmp oid-statistics

show snmp oid-statistics [ last-access ] [ __readonly__ <header> { TABLE_snmp_gen <oid_stats> | TABLE_snmp_la <oid_last_access_stats> } ]

Syntax Description


show	Show running system information
snmp	Show snmp information
oid-statistics	Show SNMP oid statistics
last-access	(Optional) Show SNMP oid statistics of last-access
__readonly__	(Optional) Read Only
header	(Optional) OID Statistics header
TABLE_snmp_gen	(Optional) contains all snmp oid statistics
oid_stats	(Optional) OID Statistics
TABLE_snmp_la	(Optional) contains all snmp oid last access statistics
oid_last_access_stats	(Optional) OID Last Access Statistics

Command Mode

/exec

show snmp roledebug

Syntax Description


show	Show running system information
snmp	show snmp information
roledebug	show SNMP roledebug

Command Mode

/exec

show snmp sessions

show snmp sessions [ __readonly__ { TABLE_session <dest> } ]

Syntax Description


show	Show running system information
snmp	show snmp information
sessions	show snmp sessions
__readonly__	(Optional) Read Only
TABLE_session	(Optional) table displays destination
dest	(Optional) destination

Command Mode

/exec

show snmp source-interface

show snmp source-interface [ __readonly__ { <trap_srcintf> <informs_srcintf> } ]

Syntax Description


show	Show running system information
snmp	show snmp information
source-interface	show source-interface through which notifications are sent
__readonly__	(Optional) Read Only
trap_srcintf	(Optional) Displays the source interface for traps
informs_srcintf	(Optional) Displays the source interface for informs

Command Mode

/exec

show snmp trap

show snmp trap [ __readonly__ { TABLE_snmp_trap <trap_type><description><isEnabled> } ]

Syntax Description


show	Show running system information
snmp	show snmp information
trap	show snmp traps
__readonly__	(Optional) Read Only
TABLE_snmp_trap	(Optional) All snmp traps configured

Command Mode

/exec

show snmp user

show snmp user [ <s0> [ engineID <s1> ] ] [ __readonly__ [ { TABLE_snmp_users <user> <auth> <priv> [ <group> ] + [ <acl_filter> ] [ <engineID> ] } ] ]

Syntax Description


show	Show running system information
snmp	show snmp information
user	show SNMPv3 users
s0	(Optional) Name of the user
engineID	(Optional) engineID
s1	(Optional) Target's SNMP engineID(colon separated) for SNMPv3 inform
__readonly__	(Optional) Read Only
TABLE_snmp_users	(Optional) table displays the snmp users
user	(Optional) user name
auth	(Optional) auth type
priv	(Optional) priv type
group	(Optional) group belongs to
acl_filter	(Optional) acl filter
engineID	(Optional) engineID for specific user

Command Mode

/exec

show sockets client

show sockets client { [ pid <pid> ] [ tcp | udp | raw ] [ detail ] [ kstack-ns-all ] } [ __readonly__ [ TABLE_total_clients [ <socket-type> <total-clients> ] [ <no-total-clients> ] ] [ TABLE_cl_sk { <prefix> <client-name> <pid> <No-of-clients> } [ <fast-tcp-mts-ctrl-q> ] [ { <cancel-requests> <cancel-unblocks> <cancel-misses> <select-drops> <select-wakes> } ] [ TABLE_det [ { <fd> <client-id> [ <mts-sap> ] } ] ] [ TABLE_st [ <soc-calls> ] [ <bind-calls> ] [ <listen-calls> ] [ <accept-calls> ] [ <acc-dispat-err> ] [ <connect-calls> ] [ <connec-dispatch> ] [ <recvmsg-dispatch> ] [ <recv-dis-nblock> ] [ <recvmsg-call> ] [ <brecv-dispatch> ] [ <fsendmsg-calls> ] [ <sendmsg-dispatch> ] [ <sendmsg-calls> ] [ <msendmsg-calls> ] [ <select-calls> ] [ <select-dispatch> ] [ <select-need-work> ] [ <sh-calls> ] [ <close-calls> ] [ <fcntl-calls> ] [ <ioctl-calls> ] [ <setsock-calls> ] [ <getsock-calls> ] [ <getsockname-calls> ] [ <getpeer-calls> ] [ <fork-calls> ] [ <execve-calls> ] [ <dup-calls> ] [ <can-calls> ] [ <can-miss> ] [ <can-unblk-sele> ] [ <soc-ha-calls> ] [ <pfork-client> ] [ <read-fd> ] [ <write-fd> ] [ <read-fd-set> ] [ <write-fd-set> ] [ <fast-tcp-send-req> ] [ <fast-tcp-send-suc> ] [ <fast-tcp-ack> ] ] [ TABLE_sterr [ <sock-err> ] [ <sock-nodev-err> ] [ <bind-err> ] [ <lis-err> ] [ <accept-err> ] [ <connect-err> ] [ <recvmsg-err> ] [ <brcvmsg-err> ] [ <fsendmsg-err> ] [ <sendmsg-err> ] [ <msndmsg-err> ] [ <select-err> ] [ <sel-nomem-err> ] [ <shut-err> ] [ <close-err> ] [ <fcntl-err> ] [ <ioctl-err> ] [ <setsoc-err> ] [ <getsoc-err> ] [ <getsocname-err> ] [ <getpeername-err> ] [ <fork-err> ] [ <execve-err> ] [ <dup-err> ] [ <psoc-vrf-err> ] [ <psoc-nosoc-err> ] [ <psoc-sock-null-err> ] [ <psoc-socre-err> ] [ <pbind-nsock-err> ] [ <pbd-getsocaddr> ] [ <pbind-sobind-err> ] [ <plisten-nsoc-err> ] [ <plis-solis-err> ] [ <pacc-nsoc-err> ] [ <pacc-no-nsoc-err> ] [ <pacc-soc-null-err> ] [ <pacc-copy-err> ] [ <pacc-no-acc-err> ] [ <pacc-woublo-err> ] [ <pacc-connabo-err> ] [ <pacc-cond-wait-err> ] [ <pacc-so-err-err> ] [ <pacc-err-err> ] [ <pcon-no-soc-err> ] [ <pcon-ealready-err> ] [ <pconn-getsock> ] [ <pconn-socon-err> ] [ <pconn-einpro-err> ] [ <pconn-con-wait-err> ] [ <psend-no-soc-err> ] [ <psend-inval-iov> ] [ <psend-getsoc-err> ] [ <psend-msg-ctrl-err> ] [ <psend-sockarg-err> ] [ <psend-pru-sosend> ] [ <precv-nosock-err> ] [ <precv-inval-iovlen> ] [ <precv-pru-sorecv> ] [ <precv-cp-msg-err> ] [ <precv-cp-msg-nlen> ] [ <precv-cp-data-err> ] [ <pbrecv-rcvmsg-err> ] [ <pshut-no-soc-err> ] [ <psetsoc-val-err> ] [ <psetsoc-inv-val> ] [ <psetsoc-no-soc-err> ] [ <psetsoc-sosetopt> ] [ <pgetsoc-no-socerr> ] [ <pgetsoc-cp-err> ] [ <pgetsoc-val-err> ] [ <pgetsoc-sogt-err> ] [ <pgtsoc-no-soc-err> ] [ <pgtsoc-cp-err> ] [ <pgtsoc-pru-soc-err> ] [ <pgtsoc-cpout-err> ] [ <pgtprne-no-soc-err> ] [ <pgtprne-enot-err> ] [ <pgtprne-cp-err> ] [ <pgtprne-pru-pradd> ] [ <pgtprne-cpout-err> ] [ <pclose-no-soc-err> ] [ <pclose-socnull-err> ] [ <pclose-p-cls2-err> ] [ <pfcntl-no-soc-err> ] [ <pfcntl-soc-null> ] [ <pfcntl-enotsup> ] [ <pfcntl-einval-err> ] [ <pioctl-no-soc-err> ] [ <pioctl-enotsup> ] [ <pioctl-pru-cntl> ] [ <pfork-enomem-err> ] [ <pdup-no-soc-err> ] [ <pudp-soc-null-err> ] [ <ha-nomem-err> ] [ <ha-tlv-err> ] [ <ha-soc-arg-err> ] [ <ha-cli-tlv-err> ] [ <ha-pss-upd-err> ] [ <ha-no-soc-err> ] [ <ha-soc-tlv-err> ] [ <ha-soc-pss-upd> ] [ <ha-inpcb-tlv> ] [ <ha-inpcb-pssky> ] [ <ha-ip-mopt-tlv> ] [ <ha-ip-mopt-pss> ] [ <ha-ip6-mopt-tlv> ] [ <ha-ip6-mopt-pss> ] [ <ha-tcpcb-tlv> ] [ <ha-tcpcb-pss> ] [ <ft-tcp-wblock> ] [ <ft-send-p-sndmsg> ] [ <ft-ack-rcv-no-soc> ] [ <lxc-tgid-err> ] ] [ TABLE_sp_cl [ <can-requests> <can-unblocks> <can-misses> <sel-drops> <sel-wakes> ] ] ] ]

Syntax Description


show	Show running system information
sockets	Display sockets status and configuration
client	Display sockets client information
pid	(Optional) Display specific client process information
pid	(Optional) Display client process <pid>
tcp	(Optional) Display TCP clients
udp	(Optional) Display UDP clients
raw	(Optional) Display RAW clients
detail	(Optional) Display socket details
kstack-ns-all	(Optional) Show kernel clients for all namespaces
__readonly__	(Optional)
TABLE_total_clients	(Optional) Total no of client sockets
socket-type	(Optional) Sockets type
total-clients	(Optional) total clients
no-total-clients	(Optional) number of total clients
TABLE_cl_sk	(Optional) Display Client sockets
prefix	(Optional) Prefix to the sockets
client-name	(Optional) Display socket client info
pid	(Optional) Display client process <pid>
No-of-clients	(Optional) Number of socket clients
fast-tcp-mts-ctrl-q	(Optional) Fast tcp mts control queue
cancel-requests	(Optional) cancel requests
cancel-unblocks	(Optional) cancel unblocks
cancel-misses	(Optional) cancel misses
select-drops	(Optional) select drops
select-wakes	(Optional) select wakes
TABLE_det	(Optional) Display Socket client Details
fd	(Optional) Client socket fd
client-id	(Optional) Client socket id
mts-sap	(Optional) socket mts addr sap
TABLE_st	(Optional) Sock detail Ctrl statistics
soc-calls	(Optional) sockets calls
bind-calls	(Optional) socket bind calls
listen-calls	(Optional) socket listen calls
accept-calls	(Optional) socket accept calls
acc-dispat-err	(Optional) socket accept dispatch error
connect-calls	(Optional) socket connect calls
connec-dispatch	(Optional) socket dispatch calls
recvmsg-dispatch	(Optional) receive msg dispatch
recv-dis-nblock	(Optional) receive dispatch nonblock
recvmsg-call	(Optional) receive message call
brecv-dispatch	(Optional) broadcast receive dispatch
fsendmsg-calls	(Optional) forward send message dispatch
sendmsg-dispatch	(Optional) send message dispatch
sendmsg-calls	(Optional) send message calls
msendmsg-calls	(Optional) multicast send message calls
select-calls	(Optional) select calls
select-dispatch	(Optional) select dispatch
select-need-work	(Optional) select need work
sh-calls	(Optional) show calls
close-calls	(Optional) close calls
fcntl-calls	(Optional) fcntl calls
ioctl-calls	(Optional) ioctl calls
setsock-calls	(Optional) setsock calls
getsock-calls	(Optional) getsock calls
getsockname-calls	(Optional) get socket name calls
getpeer-calls	(Optional) get peer calls
fork-calls	(Optional) fork calls
execve-calls	(Optional) execve calls
dup-calls	(Optional) duplicate calls
can-calls	(Optional) cancel calls
can-miss	(Optional) cancel miss
can-unblk-sele	(Optional) cancel unblock select
soc-ha-calls	(Optional) socket ha calls
pfork-client	(Optional) pfork client
read-fd	(Optional) socket read fd
write-fd	(Optional) socket write fd
read-fd-set	(Optional) socket read fd set
write-fd-set	(Optional) socket write fd set
fast-tcp-send-req	(Optional) socket fast tcp send request
fast-tcp-send-suc	(Optional) socket fast tcp send success
fast-tcp-ack	(Optional) socket fast tcp ack
TABLE_sterr	(Optional) Client Socket Error Statistics
sock-err	(Optional) socket error
sock-nodev-err	(Optional) socket nodev error
bind-err	(Optional) socket bind error
lis-err	(Optional) socket listen error
accept-err	(Optional) socket accept error
connect-err	(Optional) socket connect error
recvmsg-err	(Optional) socket receive message error
brcvmsg-err	(Optional) socket broadcast receive message error
fsendmsg-err	(Optional) socket forward send message error
sendmsg-err	(Optional) socket send message error
msndmsg-err	(Optional) socket multicast send message error
select-err	(Optional) socket select error
sel-nomem-err	(Optional) socket select no member error
shut-err	(Optional) socket shutdown error
close-err	(Optional) socket close error
fcntl-err	(Optional) socket fcntl error
ioctl-err	(Optional) socket ioctl error
setsoc-err	(Optional) set socket error
getsoc-err	(Optional) get socket error
getsocname-err	(Optional) get socket name error
getpeername-err	(Optional) get peer name error
fork-err	(Optional) socket fork error
execve-err	(Optional) socket execve error
dup-err	(Optional) socket duplicate error
psoc-vrf-err	(Optional) psocket vrf error
psoc-nosoc-err	(Optional) psocket nosoc error
psoc-sock-null-err	(Optional) psocket socket null error
psoc-socre-err	(Optional) psocket socre error
pbind-nsock-err	(Optional) pbind nsock error
pbd-getsocaddr	(Optional) pbd getsocaddr
pbind-sobind-err	(Optional) pbind sobind error
plisten-nsoc-err	(Optional) plisten nsoc error
plis-solis-err	(Optional) plisten socket listen error
pacc-nsoc-err	(Optional) paccept new socket error
pacc-no-nsoc-err	(Optional) paccept no new socket error
pacc-soc-null-err	(Optional) paccept socket null error
pacc-copy-err	(Optional) paccept copy error
pacc-no-acc-err	(Optional) paccept no accept error
pacc-woublo-err	(Optional) paccept would block error
pacc-connabo-err	(Optional) paccept connect abort error
pacc-cond-wait-err	(Optional) paccept condition wait error
pacc-so-err-err	(Optional) paccept socket error
pacc-err-err	(Optional) paccept error
pcon-no-soc-err	(Optional) pconnect no socket error
pcon-ealready-err	(Optional) pconnect ready error
pconn-getsock	(Optional) pconnect get socket
pconn-socon-err	(Optional) pconnect socket on error
pconn-einpro-err	(Optional) pconnect einprogress error
pconn-con-wait-err	(Optional) pconnect condition wait error
psend-no-soc-err	(Optional) psend no socket error
psend-inval-iov	(Optional) psend invalidate iov
psend-getsoc-err	(Optional) psend getsocket error
psend-msg-ctrl-err	(Optional) psend message control error
psend-sockarg-err	(Optional) psend socket argument error
psend-pru-sosend	(Optional) psend pru socket send
precv-nosock-err	(Optional) preceive no socket error
precv-inval-iovlen	(Optional) preceive invalidate iovlen
precv-pru-sorecv	(Optional) preceive pru so receive
precv-cp-msg-err	(Optional) preceive copy message error
precv-cp-msg-nlen	(Optional) preceive copy message new length
precv-cp-data-err	(Optional) preceive copy data error
pbrecv-rcvmsg-err	(Optional) preceive receive message error
pshut-no-soc-err	(Optional) pshutdown no socket error
psetsoc-val-err	(Optional) pset socket value error
psetsoc-inv-val	(Optional) pset socket invalidate error
psetsoc-no-soc-err	(Optional) pset socket no socket error
psetsoc-sosetopt	(Optional) pset socket set opt
pgetsoc-no-socerr	(Optional) pget socket no socket error
pgetsoc-cp-err	(Optional) pget socket copy error
pgetsoc-val-err	(Optional) pget socket validate error
pgetsoc-sogt-err	(Optional) pget socket sogt error
pgtsoc-no-soc-err	(Optional) pget socket no socket error
pgtsoc-cp-err	(Optional) pget socket copy error
pgtsoc-pru-soc-err	(Optional) pget socket pru socket error
pgtsoc-cpout-err	(Optional) pget socket copy out error
pgtprne-no-soc-err	(Optional) pget peer name no socket error
pgtprne-enot-err	(Optional) pget peer name enot connect error
pgtprne-cp-err	(Optional) pget peer name copy error
pgtprne-pru-pradd	(Optional) pget peer name pru peer address
pgtprne-cpout-err	(Optional) pget peer name copy out error
pclose-no-soc-err	(Optional) pclose no socket error
pclose-socnull-err	(Optional) pclose socket null error
pclose-p-cls2-err	(Optional) pclose p close2 error
pfcntl-no-soc-err	(Optional) pfcntl no socket error
pfcntl-soc-null	(Optional) pfcntl socket null
pfcntl-enotsup	(Optional) pfcntl enotsupport errors
pfcntl-einval-err	(Optional) pfcntl einvalidate error
pioctl-no-soc-err	(Optional) pioctl no socket error
pioctl-enotsup	(Optional) pioctl enotsup
pioctl-pru-cntl	(Optional) pioctl pru cntl
pfork-enomem-err	(Optional) pfork eno-memory error
pdup-no-soc-err	(Optional) pudp no socket error
pudp-soc-null-err	(Optional) pudp socket null error
ha-nomem-err	(Optional) ha no memory error
ha-tlv-err	(Optional) ha tlv error
ha-soc-arg-err	(Optional) ha socket argument error
ha-cli-tlv-err	(Optional) ha cli tlv error
ha-pss-upd-err	(Optional) ha pss udp error
ha-no-soc-err	(Optional) ha no socket error
ha-soc-tlv-err	(Optional) ha socket tlv error
ha-soc-pss-upd	(Optional) ha socket pss udp
ha-inpcb-tlv	(Optional) ha inpcb tlv value
ha-inpcb-pssky	(Optional) ha inpcb pssky value
ha-ip-mopt-tlv	(Optional) ha ip mopt tlv value
ha-ip-mopt-pss	(Optional) ha ip mopt pss value
ha-ip6-mopt-tlv	(Optional) ha ip6 mopt tlv value
ha-ip6-mopt-pss	(Optional) ha ip6 mopt pss value
ha-tcpcb-tlv	(Optional) ha socket update tcpcb to tlv error
ha-tcpcb-pss	(Optional) ha socket update tcpcb psskey update error
ft-tcp-wblock	(Optional) fast tcp send would block error
ft-send-p-sndmsg	(Optional) fast tcp send p_sendmsg errors
ft-ack-rcv-no-soc	(Optional) fast ack receive no socket
lxc-tgid-err	(Optional) Containers tgid err
TABLE_sp_cl	(Optional) Sock specific Ctrl statistics
can-requests	(Optional) socket control cancel request
can-unblocks	(Optional) socket cancel unblocks
can-misses	(Optional) socket cancel misses
sel-drops	(Optional) select drops
sel-wakes	(Optional) select wakes

Command Mode

/exec

show sockets connection

show sockets connection [ pid <pid> | tcp | udp | raw ] [ local { <srcIP> | <srcIP6> } ] [ foreign { <dstIP> | <dstIP6> } ] [ detail ] [ keydetails ] [ __readonly__ [ { TABLE_sockets <protocol> [ <total-conn-count> ] [ { TABLE_conn <afi> [ <laddr> ] [ <lport> ] [ <faddr> ] [ <fport> ] [ <prot> ] [ <type> ] [ <ttl> ] [ <tos> ] [ <options> ] [ <state> ] [ <rcv-count> ] [ <rcv-hiwat> ] [ <rcv-lowat> ] [ <rcv-flags> ] [ <snd-count> ] [ <snd-hiwat> ] [ <snd-lowat> ] [ <snd-flags> ] [ <iss> ] [ <snd-una> ] [ <snd-nxt> ] [ <snd_wnd> ] [ <irs> ] [ <rcv-nxt> ] [ <rcv-wnd> ] [ <snd-cwnd> ] [ <ooo_pkt_recv> ] [ <ooo_pkt_drpd> ] [ <ooo_pkt_rqc> ] [ <srtt> ] [ <rtt> ] [ <rttvar> ] [ <krtt> ] [ <rttmin> ] [ <mss> ] [ <dur> ] [ <tcp-state> ] [ <flags> ] [ <md5-cnt> ] [ <md5-host> ] [ <md5-err> ] [ <tcp-count> ] [ <udp-count> ] [ <raw-count> ] [ <vrf-name> ] [ <intf> ] } ] } ] ]

Syntax Description


show	Show running system information
sockets	Display sockets status and configuration
connection	Display connection information
pid	(Optional) Display specific client process connection status
pid	(Optional) Display client process connection status <pid>
tcp	(Optional) Display all TCP connections
udp	(Optional) Display all UDP connections
raw	(Optional) Display all raw connections
local	(Optional) Display all TCP connections with specified local address
srcIP	(Optional) Display all TCP connections with specified local address
foreign	(Optional) Display all TCP connections with specified foreign address
dstIP	(Optional) Display all TCP connections with specified foreign address
detail	(Optional) Display detailed connection infomation
keydetails	(Optional) Display md5 key specific details
__readonly__	(Optional)
TABLE_sockets	(Optional) sockets table
protocol	(Optional) socket protocol
total-conn-count	(Optional) socket connection table
TABLE_conn	(Optional)
afi	(Optional) socket family
prot	(Optional) socket protocol
tcp-state	(Optional) socket tcp state
rcv-count	(Optional) socket connection receive count
laddr	(Optional) socket conenction laddr
lport	(Optional) socket connection lport
faddr	(Optional) socket connection faddr
fport	(Optional) socket connection fport
intf	(Optional) socket connection interface
vrf-name	(Optional) socket vrf name
snd-count	(Optional) socket connection send count
type	(Optional) socket connection type
ttl	(Optional) socket connection ttl
tos	(Optional) socket connection tos
options	(Optional) socket connection option
state	(Optional) socket connection state
iss	(Optional) socket connection iss
snd-una	(Optional) socket connection send unavailable
snd-nxt	(Optional) socket connection send next
snd_wnd	(Optional) socket connection send window
irs	(Optional) socket connection irs
rcv-nxt	(Optional) socket connection receive next
rcv-wnd	(Optional) socket connection receive window
snd-cwnd	(Optional) socket connection close sent window
ooo_pkt_recv	(Optional) socket connection out-of-order packet received
ooo_pkt_drpd	(Optional) socket connection out-of-order packet dropped
ooo_pkt_rqc	(Optional) socket connection out-of-order reassembly queue count
srtt	(Optional) socket connection srtt
rtt	(Optional) socket connection rtt
rttvar	(Optional) socket connection rttvar
krtt	(Optional) socket connection krtt
rttmin	(Optional) socket connection rtt mintues
mss	(Optional) socket connection mss
dur	(Optional) socket connection duration
flags	(Optional) socket connection flags
md5-cnt	(Optional) socket connection md5 count
md5-host	(Optional) socket connection md5 host
md5-err	(Optional) socket connection md5 error
rcv-hiwat	(Optional) socket connection receive hiwat
rcv-lowat	(Optional) socket connection receive lowat
rcv-flags	(Optional) socket connection receive flags
snd-hiwat	(Optional) socket connection send hiwat
snd-lowat	(Optional) socket connection send lowat
snd-flags	(Optional) socket connection send flags
tcp-count	(Optional) socket connection tcp count
udp-count	(Optional) socket connection udp count
raw-count	(Optional) socket connection raw count

Command Mode

/exec

show sockets local-port-range

show sockets local-port-range [ __readonly__ <kstack_local_port_range_start> <kstack_local_port_range_end> <netstack_local_port_range_start> <netstack_local_port_range_end> <nat_local_port_range_start> <nat_local_port_range_end> ]

Syntax Description


show	Show running system information
sockets	Display sockets status and configuration
local-port-range	Display local port range
__readonly__	(Optional)
kstack_local_port_range_start	(Optional) Kstack local port range start
kstack_local_port_range_end	(Optional) Kstack local port range end
netstack_local_port_range_start	(Optional) Netstack local port range start
netstack_local_port_range_end	(Optional) Netstack local port range end
nat_local_port_range_start	(Optional) Nat local port range start
nat_local_port_range_end	(Optional) Nat local port range end

Command Mode

/exec

show sockets ns-port-kiosk

show sockets ns-port-kiosk [ __readonly__ [ TABLE_port_kiosk { <client-process-id> <client-name> } [ TABLE_port_state_pro_name { <entry-counter> [ <listening-port> ] [ <fwd-port> ] [ <tcp-state> ] [ <mts-sap> ] [ <protocol-name> ] } ] ] ]

Syntax Description


show	Show running system information
sockets	Display sockets status and configuration
ns-port-kiosk	Display port kiosk for netstack socket clients
__readonly__	(Optional)
TABLE_port_kiosk	(Optional) Sockets ns port kiosk information
client-process-id	(Optional) Client Process ID
client-name	(Optional) Client Name
TABLE_port_state_pro_name	(Optional) Sockets ns port state protocol information
entry-counter	(Optional) Table Entry Counter
listening-port	(Optional) Listening Port
fwd-port	(Optional) FWD Port
tcp-state	(Optional) TCP State
mts-sap	(Optional) MTS SAP
protocol-name	(Optional) Protocol Name

Command Mode

/exec

show sockets statistics

show sockets statistics [ all | tcp | tcp6 | tcpsum | udp | udp6 | udpsum | raw | raw6 | rawsum ] [ __readonly__ [ { TABLE_stat [ <rx-total> ] [ <rx-bad-csum> ] [ <rx-bad-offset> ] [ <rx-too-short> ] [ <rx-bad-md5> ] [ <rx-inseq-pack> ] [ <rx-inseq-bytes> ] [ <rx-dup-pack> ] [ <rx-dup-bytes> ] [ <rx-partdup-pack> ] [ <rx-partdup-bytes> ] [ <rx-oo-pack> ] [ <rx-oo-bytes> ] [ <rx-oo-drop-cnt> ] [ <rx-afterwin-pack> ] [ <rx-afterwin-bytes> ] [ <rx-afterclose-pack> ] [ <rx-winprobe-pack> ] [ <rx-winupdate-pack> ] [ <rx-dupack-pack> ] [ <rx-dupack-unsent-pack> ] [ <rx-ack-pack> ] [ <rx-ack-bytes> ] [ <rx-rcv-memdrop> ] [ <rx-dig-mssing> ] [ <rx-dig-unexpected> ] [ <rx-dig-notused> ] [ <rx-dig-valid> ] [ <rx-dig-invalid> ] [ <rx-get-passwd-fail> ] [ <rx-md5-mbuf-exded> ] [ <rx-uspec-src-recv> ] [ <rx-pkt-too-short> ] [ <rx-sin-finest> ] [ <rx-black-hole-syn> ] [ <rx-black-hole> ] [ <rx-drop-no-inpcb> ] [ <rx-drop-notcpcb> ] [ <rx-drp-sock-closed> ] [ <rx-syn-with-rst> ] [ <rx-syn-drop> ] [ <rx-bandlim> ] [ <rx-forged-pkt> ] [ <rx-drp-mbcast> ] [ <rx-drp-syn-add> ] [ <rx-drp-syn-recvd> ] [ <rx-drp-cc-sent> ] [ <rx-drp-rst-ccsent> ] [ <rx-frecv-enqueue> ] [ <rx-frecv-enqueue-fail> ] [ <rx-ftcp-cant-rcv-more> ] [ <rx-ftcp-data-ack-toapp-fail> ] [ <rx-ftcp-data-ack-toapp> ] [ <tx-total> ] [ <tx-urg> ] [ <tx-ctrl> ] [ <tx-data-pack> ] [ <tx-data-bytes> ] [ <tx-reasm-pack> ] [ <tx-reasm-bytes> ] [ <tx-ackonly-pack> ] [ <tx-winprobe-pack> ] [ <tx-winupdate-bytes> ] [ <tx-encrypt> ] [ <tx-unencrypt> ] [ <tx-md5rst> ] [ <tx-conn-init> ] [ <tx-conn-accepted> ] [ <tx-conn-estd> ] [ <closed> ] [ <dropped> ] [ <emb-dropped> ] [ <tx-rxmt-timeout> ] [ <tx-rxmt-timeout-dropped> ] [ <tx-ka-timeout> ] [ <tx-ka-probe> ] [ <tx-ka-drop> ] [ <gen-seg-timed> ] [ <gen-rtt-updated> ] [ <gen-delack> ] [ <gen-persist-timeout> ] [ <gen-paws-drop> ] [ <gen-predack> ] [ <gen-preddat> ] [ <gen-pcb-cachemiss> ] [ <gen-cache-drtt> ] [ <gen-cache-drttvar> ] [ <gen-cached-ssthresh> ] [ <gen-usedrtt> ] [ <gen-usedrttvar> ] [ <gen-usedssthresh> ] [ <gen-persistdrop> ] [ <gen-badsyn> ] [ <gen-mturesent> ] [ <gen-list-endrop> ] [ <gen-rpm-bind-synsock> ] [ <gen-rpm-bindsynadd> ] [ <gen-rpm-bindlookup> ] [ <gen-rpm-bindsetsock> ] [ <gen-rpm-unbind-getpass> ] [ <gen-rpm-unbinduser1> ] [ <gen-rpm-unbinduser2> ] [ <gen-rpm-unbindrollover> ] [ <gen-rpm-unbind-synfree> ] [ <gen-rpm-unbind-tpfree> ] [ <syn-sc-added> ] [ <syn-retransmitted> ] [ <syn-dupsyn> ] [ <syn-dropped> ] [ <syn-completed> ] [ <syn-bucket-overflow> ] [ <syn-cache-overflow> ] [ <syn-sc-reset> ] [ <syn-sc-stale> ] [ <syn-sc-aborted> ] [ <syn-sc-badack> ] [ <syn-sc-unreach> ] [ <syn-sc-zonefail> ] [ <syn-sc-sendcookie> ] [ <syn-sc-recvcookie> ] [ <syn-sc-crosshits> ] [ <syn-sc-supsyncrosshits> ] [ <syn-sc-removecrosshits> ] [ <udp-rx-total> ] [ <udp-rx-bad-csum> ] [ <udp-rx-no-csum> ] [ <udp-rx-too-short> ] [ <udp-rx-bad-len> ] [ <udp-rx-no-port> ] [ <udp-rx-no-port-bcast> ] [ <udp-rx-no-port-mcast> ] [ <udp-rx-full-socket-drop> ] [ <udp-tx-total> ] [ <raw-rx-version> ] [ <raw-rx-rcvd> ] [ <raw-rx-no-port> ] [ <raw-rx-full-socket-drop> ] [ <raw-tx-sent> ] [ <inpcb-tot-alloc> ] [ <inpcb-tot-bind> ] [ <inpcb-tot-laddr> ] [ <inpcb-tot-connect> ] [ <inpcb-tot-disconnect> ] [ <inpcb-tot-detach> ] [ <inpcb-tot-detach-noinc> ] [ <inpcb-tot-detach-rort> ] [ <inpcb-tot-rtfree> ] [ <inpcb-tot-setsock-addr> ] [ <inpcb-tot-setpeeraddr> ] [ <inpcb-tot-notify> ] [ <inpcb-tot-lookup-npacl-deny> ] [ <inpcb-tot-lookup-npacl-allow> ] [ <inpcb-tot-inshash-ipv4> ] [ <inpcb-tot-inshash-ipv6> ] [ <inpcb-tot-brehash-ipv4> ] [ <inpcb-tot-brehash-ipv6> ] [ <inpcb-tot-bremhash> ] [ <inpcb-err-allocnomem> ] [ <inpcb-err-bindeinavl> ] [ <inpcb-err-eaddrinuse> ] [ <inpcb-err-eagain> ] [ <inpcb-err-eagain2> ] [ <inpcb-err-eaddrnotavail> ] [ <inpcb-err-eafnosupport> ] [ <inpcb-err-enomem> ] [ <inpcb-err-ehostunreach> ] [ <inpcb-err-laddr-enxio> ] [ <inpcb-err-laddr-ehostunreach2> ] [ <inpcb-err-connectladdr> ] [ <inpcb-err-connect-eaddrinuse> ] [ <inpcb-err-connbind> ] [ <inpcb-err-sockaddrenomem> ] [ <inpcb-err-sockaddreconnreset> ] [ <inpcb-err-peeraddr-enomem> ] [ <inpcb-err-econnrest> ] [ <inpcb-err-respond-enobufs> ] [ <inpcb-err-binshash-enobufs> ] [ <in6pcb-tot-setport> ] [ <in6pcb-tot-bind> ] [ <in6pcb-tot-laddr> ] [ <in6pcb-tot-connect> ] [ <in6pcb-tot-disconnect> ] [ <in6pcb-tot-detach> ] [ <in6pcb-tot-sockaddr> ] [ <in6pcb-tot-peeraddr> ] [ <in6pcb-tot-notify> ] [ <in6pcb-tot-lookuplocal> ] [ <in6pcb-tot-hashnpacl-deny> ] [ <in6pcb-err-setporteagain> ] [ <in6pcb-err-setporteagain2> ] [ <in6pcb-err-seteagain3> ] [ <in6pcb-bind-eafnosupport> ] [ <in6pcb-err-bindeaddrinuse> ] [ <in6pcb-err-bindeaddrinuse2> ] [ <in6pcb-err-bindeaddrinuse3> ] [ <in6pcb-err-bindeaddrinuse4> ] [ <in6pcb-err-bindsetport> ] [ <in6pcb-err-bindeagain> ] [ <in6pcb-err-laddr-eafnosupport> ] [ <in6pcb-err-eaddrnotavail> ] [ <in6pcb-err-laddr-enomem> ] [ <in6pcb-err-laddr-ehostreach> ] [ <in6pcb-err-laddr-ehostunreach2> ] [ <in6pcb-err-laddr-ehostunreach3> ] [ <in6pcb-err-laddr-ehostunreach4> ] [ <in6pcb-err-laddr-enxio> ] [ <in6pcb-err-connladdr> ] [ <in6pcb-err-conneaddrinuse> ] [ <in6pcb-err-connbind> ] [ <in6pcb-err-sockaddr-enomem> ] [ <in6pcb-err-v4maps-enomem> ] [ <in6pcb-err-setsock-noinp> ] [ <in6pcb-err-setpeer-noinp> ] [ <in6pcb-err-sockaddr-noinp> ] [ <in6pcb-err-peeraddr-noinp> ] [ <in6pcb-err-notify-einavl> ] [ <in6pcb-err-ctloutput-nosoopt> ] } ] ]

Syntax Description


show	Show running system information
sockets	Display sockets status and configuration
statistics	Display sockets statistics
all	(Optional) Display TCP/UDP/RAW v4/v6 protocols statistics
tcp	(Optional) Display TCP v4 protocol statistics
tcp6	(Optional) Display TCP v6 protocol statistics
tcpsum	(Optional) Display sum of TCP v4 and TCP v6 protocols statistics
udp	(Optional) Display UDP v4 protocol statistics
udp6	(Optional) Display UDP v6 protocol statistics
udpsum	(Optional) Display sum of UDP v4 and UDP v6 protocols statistics
raw	(Optional) Display RAW v4 protocol statistics
raw6	(Optional) Display RAW v6 protocol statistics
rawsum	(Optional) Display sum of RAW v4 and RAW v6 protocols statistics
__readonly__	(Optional)
TABLE_stat	(Optional) sockets statistics table
rx-total	(Optional) total packets received
rx-bad-csum	(Optional) packets received with ccksum errs
rx-bad-offset	(Optional) packets received with bad offset
rx-too-short	(Optional) packets received too short
rx-bad-md5	(Optional) Recieved bad digest
rx-inseq-pack	(Optional) packets received in sequence
rx-inseq-bytes	(Optional) bytes received in sequence
rx-dup-pack	(Optional) duplicate-only packets received
rx-dup-bytes	(Optional) duplicate-only bytes received
rx-partdup-pack	(Optional) packets with some duplicate data
rx-partdup-bytes	(Optional) dup. bytes in part-dup. packets
rx-oo-pack	(Optional) out-of-order packets received
rx-oo-bytes	(Optional) out-of-order bytes received
rx-oo-drop-cnt	(Optional) out-of-order drop count
rx-afterwin-pack	(Optional) packets with data after window
rx-afterwin-bytes	(Optional) bytes rcvd after window
rx-afterclose-pack	(Optional) packets rcvd after close
rx-winprobe-pack	(Optional) rcvd window probe packets
rx-winupdate-pack	(Optional) rcvd window update packets
rx-dupack-pack	(Optional) rcvd duplicate acks
rx-dupack-unsent-pack	(Optional) rcvd acks for unsent data
rx-ack-pack	(Optional) rcvd ack packets
rx-ack-bytes	(Optional) bytes acked by rcvd acks
rx-rcv-memdrop

Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 9.3(x)

Results

Chapter: S Show Commands

S Show Commands

show san-port-channel compatibility-parameters

show san-port-channel consistency

show san-port-channel consistency detail

show san-port-channel database

show san-port-channel summary

show san-port-channel usage

show scheduler config

show scheduler job

show scheduler logfile

show scheduler schedule

show segment-routing

show segment-routing clients

show segment-routing ipv4 connected-prefix-sid-map

show segment-routing mpls

show segment-routing mpls clients

show segment-routing mpls ipv4 connected-prefix-sid-map

show sflow

show sflow statistics

show smart-channel

show snapshots

show snapshots compare

show snapshots compare ipv4routes

show snapshots compare ipv6routes

show snapshots compare summary

show snapshots dump

show snapshots dump

show snapshots sections

show snmp

show snmp community

show snmp context

show snmp engineID

show snmp group

show snmp host

show snmp mib igmpCacheTable

show snmp mib igmpInterfaceTable

show snmp nms-statistics

show snmp oid-statistics

show snmp roledebug

show snmp sessions

show snmp source-interface

show snmp trap

show snmp user

show sockets client

show sockets connection

show sockets local-port-range

show sockets ns-port-kiosk

show sockets statistics