The following commands are added in this release.

• clear access-list dest-miss stats [ module <module> ]

• [ no ] hardware profile openflow forward-pdu

• logging level ofm <i0> | no logging level ofm [ <i0> ]

• mac-address-mtc <mac_address_val> | no mac-address-mtc [ <mac_address_val> ]

• mac-address-mtc ipv6-extract-mtc | no mac-address-mtc ipv6-extract-mtc

• media-type <media_type> | no media-type [ <media_type> ]

• [ no ] { platform | hardware } qos nodrop pause dynamic q-limit <q-limit>

• [ no ] { platform | hardware } qos nodrop pause resume-offset <resume-offset>

• [ no ] { platform | hardware } qos nodrop-PG-thresholds PG-size <pg-total> [ reserved-size nodrop <nodrop-reserved-size> drop <drop-reserved-size> ] [ slice <slice> ]

• [ no ] system multicast dcs-check

• [ no ] system routing l3-scale

• [ no ] system ip-redirect hardware-drop

• [ no ] system module emon-enhanced timeout-multiplier <multiplier>

The following commands are modified in this release.

• OLD: [ no ] ip igmp host-proxy [ unsolicited [ <time> ] | route-map <route-map-name> [ unsolicited [ <time> ] ] | prefix-list <prefix-list-name> [ unsolicited [ <time> ] ] ]

• NEW: [ no ] ip igmp host-proxy [ unsolicited <time> | route-map <route-map-name> [ unsolicited <time> ] | prefix-list <prefix-list-name> [ unsolicited <time> ] ]

• OLD: [ no ] member { device-alias <s0> [ lun <lun0> ] [ { initiator | target | both } ] | domain-id <i1> port-number <i2> | fcalias <s1> | fcid <fcid3> [ lun1 <lun4> ] [ { initiator | target | both } ] | fwwn <wwn5> | interface <if0> [ { domain-id1 <i6> | swwn <wwn7> } ] | pwwn <wwn9> [ lun2 <lun10> ] [ { initiator | target | both } ] | symbolic-nodename <s2> }

• NEW: [ no ] member { device-alias <s0> [ lun <lun0> ] | domain-id <i1> port-number <i2> | fcalias <s1> | fcid <fcid3> [ lun1 <lun4> ] | fwwn <wwn5> | interface <if0> [ { domain-id1 <i6> | swwn <wwn7> } ] | pwwn <wwn9> [ lun2 <lun10> ] | symbolic-nodename <s2> }

• OLD: [ no ] member { device-alias <s0> [ lun <lun0> ] [ { initiator | target | both } ] | domain-id <i1> port-number <i2> | fcid <fcid3> [ lun1 <lun4> ] [ { initiator | target | both } ] | fwwn <wwn5> | interface <if0> [ { domain-id1 <i6> | swwn <wwn7> } ] | pwwn <wwn9> [ lun2 <lun10> ] [ { initiator | target | both } ] | symbolic-nodename <s1> }

• NEW: [ no ] member { device-alias <s0> [ lun <lun0> ] | domain-id <i1> port-number <i2> | fcid <fcid3> [ lun1 <lun4> ] | fwwn <wwn5> | interface <if0> [ { domain-id1 <i6> | swwn <wwn7> } ] | pwwn <wwn9> [ lun2 <lun10> ] | symbolic-nodename <s1> }

• OLD: [ no ] system default zone { default-zone permit | distribute full | gs { read | read-write } | mode enhanced | smart-zone enable }

• NEW: [ no ] system default zone { default-zone permit | distribute full | gs { read | read-write } | mode enhanced }

• OLD: [ no ] system module emon-enhanced [ slow-timeout ]

• NEW: [ no ] system module emon-enhanced [ slow-timeout | { timeout-multiplier <multiplier> } ]

The following commands are removed in this release.

• clear zone smart-zoning { { vsan1 <vsan_id> } | { fcalias name <fcalias_name> vsan2 <vsan_id> | zone name1 <zone_name> vsan2 <vsan_id> | zoneset name2 <zs_name> vsan2 <vsan_id> } }

• [ no ] device-alias mode enhanced

• [ no ] disable-smart-zoning

• [ no ] match ip { source | destination } address

• perf [ { record { context-switch | profile } { system | process <i0> } [ <s1> ] } | { stop { all | <s0> } } | { list } | { create-archive <s2> } | { remove { all | <s3> } } ]

• zone convert smart-zoning { { vsan1 <vsan_id> } | { fcalias name <fcalias_name> vsan2 <vsan_id> | zone name1 <zone_name> vsan2 <vsan_id> | zoneset name2 <zs_name> vsan2 <vsan_id> } }

• [ no ] zone mode enhanced vsan <i0>

• [ no ] zone smart-zoning enable vsan <i0>