New and Changed Information
This table summarizes the new and changed features for the Cisco Nexus 9000 Series NX-OS IP Fabric for Media Solution Guide, Release 9.2(x) and tells you where they are documented.
Feature |
Description |
Changed in Release |
Where Documented |
---|---|---|---|
Host policies |
Added the ability to enter a wildcard (0.0.0.0) for the host IP address for sender and local receiver host policies. |
9.2(3) |
|
NBM |
Added the ability to establish flows by creating an NBM flow definition. |
9.2(3) |
|
NBM |
Added the ability to disable the policer for NBM flow policies. |
9.2(3) |
|
PIM |
Removed the requirement to prebuild the shortest path tree (SPT) for known (S,G) routes using the ip pim pre-build-spt force command. |
9.2(3) |
|
IP fabric for media |
Added support for the Cisco Nexus 9336C-FX2 and 93240YC-FX2 as leaf or spine switches. |
9.2(1) |
|
Flow bandwidth |
Added the ability to configure the flow bandwidth and flow policy bandwidth in Kbps, Mbps, or Gbps and changed the default value to 0. |
9.2(1) |
|
Host policies |
Added the ability to configure host policies within NBM for senders, local receivers, and external receivers. |
9.2(1) |
|
Multisite |
Introduced this feature for all IP fabric for media supported platforms. |
9.2(1) |
|
NBM |
Deprecated the nbm mode controller command in Cisco NX-OS 9.x releases. |
9.2(1) |