O Show Commands
show object-group
show openflow hardware capabilities
show openflow switch
show openflow switch flows
show ospfv3
show ospfv3 border-routers
show ospfv3 database
show ospfv3 database database-summary
show ospfv3 database detail
show ospfv3 event-history
show ospfv3 event-history detail
show ospfv3 ha
show ospfv3 interface
show ospfv3 interface brief
show ospfv3 lsa-content-changed-list
show ospfv3 memory
show ospfv3 neighbors
show ospfv3 neighbors detail
show ospfv3 neighbors summary
show ospfv3 policy statistics
show ospfv3 request-list
show ospfv3 retransmission-list
show ospfv3 route
show ospfv3 route summary
show ospfv3 statistics
show ospfv3 summary-address
show ospfv3 traffic
show ospfv3 virtual-links
show ospfv3 virtual-links brief

O Show Commands

show object-group

show object-group [ <name> ] [ __readonly__ TABLE_ogroup <group_type> <group_name> [ TABLE_seqno <seqno> { <_port_op> <port0_num> | <_port_range> <port1_num> <port2_num> | <hostaddr> | <net_ip> | <mask_ip_addr> <mask_ip_mask> | <hostipv6> | <net_ipv6> | <mask_ipv6_addr> <mask_ipv6_mask> } ] ]

Syntax Description


show	Show running system information
object-group	Show configured ACL object groups
name	(Optional) object-group name
__readonly__	(Optional)
group_type	(Optional) Object group type
group_name	(Optional) Object group name
seqno	(Optional) Sequence number
TABLE_ogroup	(Optional)
TABLE_seqno	(Optional)
_port_op	(Optional) Port operator
_port_range	(Optional) Port range
port0_num	(Optional) Port number
port1_num	(Optional) Port number
port2_num	(Optional) Port number
net_ip	(Optional) A.B.C.D Network address of object-group member
hostaddr	(Optional) A.B.C.D Host address
mask_ip_addr	(Optional) A.B.C.D IP address
mask_ip_mask	(Optional) A.B.C.D IP address mask

Command Mode

/exec

show openflow hardware capabilities

show openflow hardware capabilities [ pipeline <pipeline-id> ]

Syntax Description


show	Show running system information
openflow	Show OpenFlow information
hardware	Hardware
capabilities	Capabilities
pipeline	(Optional) Pipeline id
pipeline-id	(Optional) Pipeline id

Command Mode

/exec

show openflow switch

show openflow switch <switch-id> [ { controllers [ stats | { role { master | slave | equal } } ] | ports } ] [ __readonly__ <cli_output> <ctrlv4> <ctrlport> ]

Syntax Description


show	Show running system information
openflow	Show OpenFlow information
switch	Logical switch id
switch-id	Logical switch-id to enter
controllers	(Optional) Controllers
stats	(Optional) Stats
ports	(Optional) Ports
role	(Optional) Controller role
master	(Optional) Master
slave	(Optional) Slave
equal	(Optional) Equal
__readonly__	(Optional)
cli_output	(Optional)
ctrlv4	(Optional)
ctrlport	(Optional)

Command Mode

/exec

show openflow switch flows

Syntax Description


show	Show running system information
openflow	Show OpenFlow information
switch	Logical switch id
switch-id	Logical switch-id to enter
flows	Flows
brief	(Optional) Brief
summary	(Optional) Summary
pending	(Optional) Pending
pending-del	(Optional) Pending delete
controller	(Optional) Controller
configured	(Optional) Configured
default	(Optional) Default
fixed	(Optional) Fixed
stats	(Optional) Stats
table-id	(Optional) Table-id for the pipeline
list	(Optional) List
table-id	(Optional) Table ID

Command Mode

/exec

show ospfv3

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <instance_number> <cname> <rid> <stateful_ha> <gr_ha> [ [ <gr_planned_only> ] [ <gr_notify_period> ] [ <gr_grace_period> ] [ <gr_state> ] [ <gr_last_status> ] ] [ <gr_helper_mode> ] <support_tos0_only> <support_opaque_lsa> [ <low_mem_cond> ] <is_abr> <is_asbr> [ <max_lsa_non_self_number> ] [ <max_lsa_state> ] [ <max_lsa_warning_only> ] [ <max_lsa_current_non_self_lsa_number> ] [ <max_lsa_threshold_pct> ] [ <max_lsa_ignore_time> ] [ <max_lsa_reset_time> ] [ <max_lsa_ignore_count> ] [ <max_lsa_current_ignore_count> ] [ <max_lsa_ignore_time_left> ] [ <max_lsa_reset_time_left> ] [ <max_lsa_permanent_ignore> ] [ <ipsec_sa_type> ] [ <ipsec_sa_algorithm> ] [ <ipsec_sa_spi> ] [ { TABLE_redist <proto> [ <max_lsas> ] [ <warning> ] [ <threshold> ] [ <current_count> ] } ] <admin_dist> <ref_bw> <spf_start_time> <spf_hold_time> <spf_max_time> <lsa_start_time> <lsa_hold_time> <lsa_max_time> <min_lsa_arr_time> <lsa_aging_pace> <spf_max_paths> <max_metric_adver> [ [ <max_metric_time_left> ] [ <max_metric_wait_bgp> ] [ <max_metric_timeout> ] [ <max_metric_always> ] [ <max_metric_sum_lsa> ] [ <max_metric_ext_lsa> ] ] <asext_lsa_cnt> <asext_lsa_crc> <area_total> <area_normal> <area_stub> <area_nssa> <act_area_total> <act_area_normal> <act_area_stub> <act_area_nssa> <no_discard_rt_ext> <no_discard_rt_int> [ <bfd_enabled> ] [ <passive_dflt> ] [ <name_lookup> ] [ { TABLE_area <aname> [ <backbone_active> ] [ <active> ] <age> <total_intf> <act_intf> <passive_intf> <loopback_intf> [ <gr_nbr_cnt> ] <stub> [ <stub_def_cost> ] <nssa> [ <no_redist> ] [ <nssa_trans> ] <no_summary> <spf_runs> <last_spf_run_time> [ <rtr_lsa_throt> ] [ <ipsec_sa_type> ] [ <ipsec_sa_algorithm> ] [ <ipsec_sa_spi> ] [ TABLE_range <addr> <masklen> <state> <nets> <advertise> [ <cost> ] ] [ <filter_in> ] [ <filter_out> ] <lsa_cnt> <lsa_crc> } ] ]

Syntax Description


show	Show running system information
ipv6	(Optional) Display IPv6 information
ospfv3	Display OSPFv3 status and configuration
tag	(Optional) Process tag
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
__readonly__	(Optional)
TABLE_ctx	(Optional)
ptag	(Optional)
instance_number	(Optional)
cname	(Optional)
rid	(Optional)
stateful_ha	(Optional)
gr_ha	(Optional)
gr_planned_only	(Optional)
gr_notify_period	(Optional)
gr_grace_period	(Optional)
gr_state	(Optional)
gr_last_status	(Optional)
gr_helper_mode	(Optional)
support_tos0_only	(Optional)
support_opaque_lsa	(Optional)
low_mem_cond	(Optional)
is_abr	(Optional)
is_asbr	(Optional)
max_lsa_non_self_number	(Optional)
max_lsa_state	(Optional)
max_lsa_warning_only	(Optional)
max_lsa_current_non_self_lsa_number	(Optional)
max_lsa_threshold_pct	(Optional)
max_lsa_ignore_time	(Optional)
max_lsa_reset_time	(Optional)
max_lsa_ignore_count	(Optional)
max_lsa_current_ignore_count	(Optional)
max_lsa_ignore_time_left	(Optional)
max_lsa_reset_time_left	(Optional)
max_lsa_permanent_ignore	(Optional)
ipsec_sa_type	(Optional) IPsec SA Type
ipsec_sa_algorithm	(Optional) IPsec SA Algorithm name
ipsec_sa_spi	(Optional) IPsec SA SPI Value
TABLE_redist	(Optional)
proto	(Optional)
max_lsas	(Optional)
warning	(Optional)
threshold	(Optional)
current_count	(Optional)
admin_dist	(Optional)
ref_bw	(Optional)
spf_start_time	(Optional)
spf_hold_time	(Optional)
spf_max_time	(Optional)
lsa_start_time	(Optional)
lsa_hold_time	(Optional)
lsa_max_time	(Optional)
min_lsa_arr_time	(Optional)
lsa_aging_pace	(Optional)
spf_max_paths	(Optional)
max_metric_adver	(Optional)
max_metric_time_left	(Optional)
max_metric_wait_bgp	(Optional)
max_metric_timeout	(Optional)
max_metric_always	(Optional)
max_metric_sum_lsa	(Optional)
max_metric_ext_lsa	(Optional)
asext_lsa_cnt	(Optional)
asext_lsa_crc	(Optional)
area_total	(Optional)
area_normal	(Optional)
area_stub	(Optional)
area_nssa	(Optional)
act_area_total	(Optional)
act_area_normal	(Optional)
act_area_stub	(Optional)
act_area_nssa	(Optional)
bfd_enabled	(Optional)
passive_dflt	(Optional)
name_lookup	(Optional)
no_discard_rt_ext	(Optional)
no_discard_rt_int	(Optional)
TABLE_area	(Optional)
aname	(Optional)
backbone_active	(Optional)
active	(Optional)
age	(Optional)
total_intf	(Optional)
act_intf	(Optional)
passive_intf	(Optional)
loopback_intf	(Optional)
gr_nbr_cnt	(Optional)
stub	(Optional)
stub_def_cost	(Optional)
nssa	(Optional)
no_redist	(Optional)
nssa_trans	(Optional)
no_summary	(Optional)
spf_runs	(Optional)
last_spf_run_time	(Optional)
rtr_lsa_throt	(Optional)
ipsec_sa_type	(Optional) IPsec SA Type
ipsec_sa_algorithm	(Optional) IPsec SA Algorithm name
ipsec_sa_spi	(Optional) IPsec SA SPI Value
TABLE_range	(Optional)
masklen	(Optional)
state	(Optional)
nets	(Optional)
advertise	(Optional)
cost	(Optional)
filter_in	(Optional)
filter_out	(Optional)
lsa_cnt	(Optional)
lsa_crc	(Optional)

Command Mode

/exec

show ospfv3 border-routers

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] border-routers [ all_routes ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_br <type> <addr> <cost> <asbr> <abr> <area> <spf_inst> [ <vlink_unresolved> ] [ TABLE_br_ubest_nh [ <ubest_nh_addr> ] [ <ubest_nh_intf> ] ] [ TABLE_br_mbest_nh [ <mbest_nh_addr> ] [ <mbest_nh_intf> ] ] ] ]

Syntax Description


show	Show running system information
ipv6	(Optional) Display IPv6 information
ospfv3	Display OSPFv3 status and configuration
tag	(Optional) Process tag
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
border-routers	Border routers
all_routes	(Optional) Display all OSPFv3 routes
__readonly__	(Optional)
TABLE_ctx	(Optional)
ptag	(Optional)
cname	(Optional)
TABLE_br	(Optional)
type	(Optional)
addr	(Optional)
cost	(Optional)
asbr	(Optional)
abr	(Optional)
area	(Optional)
spf_inst	(Optional)
vlink_unresolved	(Optional)
TABLE_br_ubest_nh	(Optional)
ubest_nh_intf	(Optional)
TABLE_br_mbest_nh	(Optional)
mbest_nh_intf	(Optional)

Command Mode

/exec

show ospfv3 database

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] database [ [ [ [ router | network | intra-area-prefix | inter-area { irouter | iprefix } | nssa-external | area-unknown | [ [ { link | link-unknown | grace } [ <interface> ] ] ] ] [ area <area-id-ip> ] ] | external [ tag <tag_val> ] | as-unknown ] [ <lsid> ] [ self-originated | adv-router <advid> | adv-router-name <adv-name> ] ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <rid> <ptag> <cname> [ TABLE_db3_lsa [ <name> ] [ <area> ] [ <id> ] [ <advrtr> ] [ <age> ] [ <seqno> ] [ <corrupt> ] [ <rtr_num_links> ] [ <net_num_rtr> ] [ <prefix> ] [ <inter_rid> ] [ <link_if> ] [ <intra_ref_type> ] [ <intra_ref_lsid> ] ] ]

Syntax Description


show	Show running system information
ipv6	(Optional) Display IPv6 information
ospfv3	Display OSPFv3 status and configuration
tag	(Optional) Process tag
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
database	Link-state Database Summary
router	(Optional) Display router LSAs
network	(Optional) Display network LSAs
inter-area	(Optional) Display inter-area LSAs
iprefix	(Optional) Display Inter-Area-Prefix LSAs
irouter	(Optional) Display Inter-Area-Router LSAs
nssa-external	(Optional) Display NSSA-external LSAs
area-unknown	(Optional) Display area-scope unknown LSAs
external	(Optional) Display AS-external LSAs
as-unknown	(Optional) Display as-scope unknown LSAs
grace	(Optional) Display Grace LSAs
link	(Optional) Display Link LSAs
link-unknown	(Optional) Display link-scope unknown LSAs
interface	(Optional) OSPF enabled interface
intra-area-prefix	(Optional) Display Intra-Area-Prefix LSAs
self-originated	(Optional) Display only self-originated LSAs
lsid	(Optional) Restrict display by link state ID
adv-router	(Optional) Restrict display by Advertising router
advid	(Optional) Advertising router ID
adv-router-name	(Optional) Restrict display by Advertising router name
adv-name	(Optional) DNS Name of the Advertising router
area	(Optional) Display only LSA's in this area
area-id-ip	(Optional) Area Id as an integer or ip address
tag	(Optional) Restrict display by tag
tag_val	(Optional) 32-bit tag value
__readonly__	(Optional)
TABLE_ctx	(Optional)
rid	(Optional)
ptag	(Optional)
cname	(Optional)
TABLE_db3_lsa	(Optional)
name	(Optional)
area	(Optional)
id	(Optional)
advrtr	(Optional)
age	(Optional)
seqno	(Optional)
corrupt	(Optional)
rtr_num_links	(Optional)
net_num_rtr	(Optional)
inter_rid	(Optional)
link_if	(Optional)
intra_ref_type	(Optional)
intra_ref_lsid	(Optional)

Command Mode

/exec

show ospfv3 database database-summary

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] database database-summary [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <rid> <ptag> <cname> [ TABLE_dbsum [ TABLE_dbsum_area <area> [ TABLE_dbsum_area_lsa <area_lsa_name> <area_lsa_count> ] <area_lsa_total> ] [ TABLE_dbsum_all [ TABLE_dbsum_lsa_all <lsa_name> <lsa_count> ] <non_self_lsa_total> <lsa_total> ] ] ]

Syntax Description


show	Show running system information
ipv6	(Optional) Display IPv6 information
ospfv3	Display OSPFv3 status and configuration
tag	(Optional) Process tag
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
database	Link-state Database Summary
database-summary	Summary of database
__readonly__	(Optional)
TABLE_ctx	(Optional)
rid	(Optional)
ptag	(Optional)
cname	(Optional)
TABLE_dbsum	(Optional)
TABLE_dbsum_area	(Optional)
area	(Optional)
TABLE_dbsum_area_lsa	(Optional)
area_lsa_name	(Optional)
area_lsa_count	(Optional)
area_lsa_total	(Optional)
TABLE_dbsum_all	(Optional)
TABLE_dbsum_lsa_all	(Optional)
lsa_name	(Optional)
lsa_count	(Optional)
non_self_lsa_total	(Optional)
lsa_total	(Optional)

Command Mode

/exec

show ospfv3 database detail

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] database [ [ [ router | network | intra-area-prefix | inter-area { irouter | iprefix } | nssa-external | area-unknown | [ [ { link | link-unknown | grace } [ <interface> ] ] ] ] [ area <area-id-ip> ] ] | external [ tag <tag_val> ] | as-unknown ] [ <lsid> ] [ self-originated | adv-router <advid> | adv-router-name <adv-name> ] detail [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <rid> <ptag> <cname> [ TABLE_db3_lsa [ <name> ] [ <area> ] [ TABLE_lsdb <age> <maxage> <wrapping> <dummy> <flush_pending> <type> [ <intf> ] <id> <advrtr> <seqno> <cksum> <len> [ <corrupt> ] [ <rtr_abr> ] [ <rtr_asbr> ] [ <rtr_translate> ] [ <rtr_vlink_end> ] [ <rtr_options> ] [ <rtr_num_links> ] [ TABLE_rlsa [ <rtr_link_type> ] [ <rtr_link_metric> ] [ <rtr_link_ifid> ] [ <rtr_link_nbr_ifid> ] [ <rtr_link_nbr_rid> ] ] [ <net_options> ] [ TABLE_nlsa [ <net_rtr> ] ] [ <ia_prefix> ] [ <ia_prefix_options> ] [ <ia_prefix_metric> ] [ <ia_rtr_options> ] [ <ia_rtr_metric> ] [ <ia_rtr_rid> ] [ <asext_prefix> ] [ <asext_options> ] [ <asext_metric_type2> ] [ <asext_metric> ] [ <asext_fwd_addr> ] [ <asext_tag> ] [ <asext_ref_lstype> ] [ <asext_ref_lsid> ] [ <link_priority> ] [ <link_options> ] [ <link_laddr> ] [ <link_num_prefix> ] [ TABLE_linklsa [ <link_prefix> ] [ <link_prefix_options> ] ] [ <intra_num_prefix> ] [ <intra_ref_lstype> ] [ <intra_ref_lsid> ] [ <intra_ref_advrtr> ] [ TABLE_iaplsa [ <intra_prefix> ] [ <intra_prefix_options> ] [ <intra_prefix_metric> ] [ <corrupted_length> ] ] [ <tlv_type> ] [ <tlv_len> ] [ <tlv_data> ] [ <tlv_unknown> ] [ <gr_interval> ] [ <gr_reason> ] [ <unknown> ] [ <data_len> ] [ <data> ] ] ] ]

Syntax Description


show	Show running system information
ipv6	(Optional) Display IPv6 information
ospfv3	Display OSPFv3 status and configuration
tag	(Optional) Process tag
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
database	Link-state Database Summary
router	(Optional) Display router LSAs
network	(Optional) Display network LSAs
inter-area	(Optional) Display inter-area LSAs
iprefix	(Optional) Display Inter-Area-Prefix LSAs
irouter	(Optional) Display Inter-Area-Router LSAs
nssa-external	(Optional) Display NSSA-external LSAs
area-unknown	(Optional) Display area-scope unknown LSAs
external	(Optional) Display AS-external LSAs
as-unknown	(Optional) Display as-scope unknown LSAs
grace	(Optional) Display Grace LSAs
link	(Optional) Display Link LSAs
link-unknown	(Optional) Display link-scope unknown LSAs
interface	(Optional) OSPF enabled interface
intra-area-prefix	(Optional) Display Intra-Area-Prefix LSAs
self-originated	(Optional) Display only self-originated LSAs
lsid	(Optional) Restrict display by link state ID
adv-router	(Optional) Restrict display by Advertising router
advid	(Optional) Advertising router ID
adv-router-name	(Optional) Restrict display by Advertising router name
adv-name	(Optional) DNS Name of the Advertising router
area	(Optional) Display only LSA's in this area
area-id-ip	(Optional) Area Id as an integer or ip address
tag	(Optional) Restrict display by tag
tag_val	(Optional) 32-bit tag value
detail	Display LSA in detail
__readonly__	(Optional)
TABLE_ctx	(Optional)
rid	(Optional)
ptag	(Optional)
cname	(Optional)
TABLE_db3_lsa	(Optional)
name	(Optional)
area	(Optional)
TABLE_lsdb	(Optional)
age	(Optional)
maxage	(Optional)
wrapping	(Optional)
dummy	(Optional)
flush_pending	(Optional)
type	(Optional)
intf	(Optional)
id	(Optional)
advrtr	(Optional)
seqno	(Optional)
cksum	(Optional)
len	(Optional)
corrupt	(Optional)
rtr_abr	(Optional)
rtr_asbr	(Optional)
rtr_translate	(Optional)
rtr_vlink_end	(Optional)
rtr_options	(Optional)
rtr_num_links	(Optional)
TABLE_rlsa	(Optional)
rtr_link_type	(Optional)
rtr_link_metric	(Optional)
rtr_link_ifid	(Optional)
rtr_link_nbr_ifid	(Optional)
rtr_link_nbr_rid	(Optional)
net_options	(Optional)
TABLE_nlsa	(Optional)
net_rtr	(Optional)
ia_prefix_options	(Optional)
ia_prefix_metric	(Optional)
ia_rtr_options	(Optional)
ia_rtr_metric	(Optional)
ia_rtr_rid	(Optional)
asext_options	(Optional)
asext_metric_type2	(Optional)
asext_metric	(Optional)
asext_tag	(Optional)
asext_ref_lstype	(Optional)
asext_ref_lsid	(Optional)
link_priority	(Optional)
link_options	(Optional)
link_num_prefix	(Optional)
TABLE_linklsa	(Optional)
link_prefix_options	(Optional)
intra_num_prefix	(Optional)
intra_ref_lstype	(Optional)
intra_ref_lsid	(Optional)
intra_ref_advrtr	(Optional)
TABLE_iaplsa	(Optional)
intra_prefix_options	(Optional)
intra_prefix_metric	(Optional)
corrupted_length	(Optional)
tlv_type	(Optional)
tlv_len	(Optional)
tlv_data	(Optional)
tlv_unknown	(Optional)
gr_interval	(Optional)
gr_reason	(Optional)
unknown	(Optional)
data_len	(Optional)
data	(Optional)

Command Mode

/exec

show ospfv3 event-history

show ospfv3 [ <tag> ] [ internal ] event-history { errors | msgs | statistics | adjacency | event | ha | flooding | lsa | spf | redistribution | hello | spf-trigger | cli | rib }

Syntax Description


show	Show running system information
ospfv3	Display OSPFv3 status and configuration
tag	(Optional) Process tag
internal	(Optional) Commands for internal use
event-history	Show various event logs of OSPF
errors	Error logs
msgs	IPC logs
statistics	Show the state and size of the buffers
adjacency	Adjacency formation logs
event	Internal event logs
ha	HA and GR logs
flooding	LSA flooding logs
lsa	LSA generation and databse logs
spf	SPF calculation logs
redistribution	Redistribution logs
hello	Hello related logs
spf-trigger	SPF TRIGGER related logs
cli	Cli logs
rib	RIB related logs

Command Mode

/exec

show ospfv3 event-history detail

show ospfv3 [ <tag> ] [ internal ] event-history detail [ statistics ]

Syntax Description


show	Show running system information
ospfv3	Display OSPFv3 status and configuration
tag	(Optional) Process tag
internal	(Optional) Commands for internal use
event-history	Show event history of OSPF
detail	Show detailed event history information
statistics	(Optional) Show the state and size of the verbose history buffer

Command Mode

/exec

show ospfv3 ha

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] ha [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> <stateful> <pss_restored> <pss_state> <gr_enabled> <gr_grace_period> <gr_state> <gr_last_status> <gr_helper_mode> ]

Syntax Description


show	Show running system information
ipv6	(Optional) Display IPv6 information
ospfv3	Display OSPFv3 status and configuration
tag	(Optional) Process tag
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
ha	High Availability status
__readonly__	(Optional)
TABLE_ctx	(Optional)
ptag	(Optional)
cname	(Optional)
stateful	(Optional)
pss_restored	(Optional)
pss_state	(Optional)
gr_enabled	(Optional)
gr_grace_period	(Optional)
gr_state	(Optional)
gr_last_status	(Optional)
gr_helper_mode	(Optional)

Command Mode

/exec

show ospfv3 interface

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] interface [ <interface> | vrf { <vrf-name> | <vrf-known-name> | all } ] [ private ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_intf <ifname> <admin_status> <proto_status> <addr> [ <masklen> ] [ <inst_id> ] <area> [ <if_cfg> ] <state_str> <type_str> <cost> [ <bfd_enabled> ] <index> [ <passive> ] [ <mpls> ] [ <transmit_delay> ] [ <if_priority> ] [ <dr_rid> ] [ <dr_addr> ] [ <bdr_rid> ] [ <bdr_addr> ] [ <nbr_total> ] [ <nbr_flood> ] [ <nbr_adjs> ] [ <gr_nbr> ] [ <hello_interval> ] [ <dead_interval> ] [ <wait_interval> ] [ <rxmt_interval> ] [ <hello_timer> ] [ <wait_timer> ] [ <pacing_timer> ] [ <lsu_timer> ] [ <lsack_timer> ] [ <netlsa_throt_timer> ] [ <link_lsa_cnt> ] [ <link_lsa_crc> ] [ <ipsec_sa_type> ] [ <ipsec_sa_algorithm> ] [ <ipsec_sa_spi> ] ] ]

Syntax Description


show	Show running system information
ipv6	(Optional) Display IPv6 information
ospfv3	Display OSPFv3 status and configuration
tag	(Optional) Process tag
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
interface	OSPF enabled interface
interface	(Optional) OSPF enabled interface
private	(Optional) Developer-only statistics
__readonly__	(Optional)
TABLE_ctx	(Optional)
ptag	(Optional)
cname	(Optional)
TABLE_intf	(Optional)
ifname	(Optional)
admin_status	(Optional)
proto_status	(Optional)
masklen	(Optional)
inst_id	(Optional)
area	(Optional)
if_cfg	(Optional)
state_str	(Optional)
type_str	(Optional)
cost	(Optional)
bfd_enabled	(Optional)
index	(Optional)
passive	(Optional)
mpls	(Optional)
transmit_delay	(Optional)
if_priority	(Optional)
dr_rid	(Optional)
bdr_rid	(Optional)
nbr_total	(Optional)
nbr_flood	(Optional)
nbr_adjs	(Optional)
gr_nbr	(Optional)
hello_interval	(Optional)
dead_interval	(Optional)
wait_interval	(Optional)
rxmt_interval	(Optional)
hello_timer	(Optional)
wait_timer	(Optional)
pacing_timer	(Optional)
lsu_timer	(Optional)
lsack_timer	(Optional)
netlsa_throt_timer	(Optional)
link_lsa_cnt	(Optional)
link_lsa_crc	(Optional)
ipsec_sa_type	(Optional) IPsec SA Type
ipsec_sa_algorithm	(Optional) IPsec SA Algorithm name
ipsec_sa_spi	(Optional) IPsec SA SPI Value

Command Mode

/exec

show ospfv3 interface brief

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] interface brief [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> <intf_count> TABLE_intf <ifname> <index> <area> <cost> <state_str> <nbr_total> <admin_status> ]

Syntax Description


show	Show running system information
ipv6	(Optional) Display IPv6 information
ospfv3	Display OSPFv3 status and configuration
tag	(Optional) Process tag
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
interface	OSPF enabled interface
brief	Display summary of OSPFv3 interfaces
__readonly__	(Optional)
TABLE_ctx	(Optional)
ptag	(Optional)
cname	(Optional)
intf_count	(Optional)
TABLE_intf	(Optional)
ifname	(Optional)
index	(Optional)
area	(Optional)
cost	(Optional)
state_str	(Optional)
nbr_total	(Optional)
admin_status	(Optional)

Command Mode

/exec

show ospfv3 lsa-content-changed-list

show [ ipv6 ] ospfv3 [ <tag> ] lsa-content-changed-list { <ip-addr> | <neighbor-name> } <interface> [ __readonly__ [ TABLE_ctx <ptag> <cname> [ TABLE_lschg <nbr_rid> <intf> <nbr_addr> [ TABLE_lsa [ <type> ] [ <lsid> ] [ <advrtr> ] [ <seqno> ] [ <cksum> ] [ <age> ] ] ] ] ]

Syntax Description


show	Show running system information
ipv6	(Optional) Display IPv6 information
ospfv3	Display OSPFv3 status and configuration
tag	(Optional) Process tag
lsa-content-changed-list	LSAs that changed contents
interface	OSPF enabled interface
ip-addr	Neighbor router ID
neighbor-name	DNS Name of the neighbor
__readonly__	(Optional)
TABLE_ctx	(Optional)
ptag	(Optional)
cname	(Optional)
TABLE_lschg	(Optional)
nbr_rid	(Optional)
intf	(Optional)
TABLE_lsa	(Optional)
type	(Optional)
lsid	(Optional)
advrtr	(Optional)
seqno	(Optional)
cksum	(Optional)
age	(Optional)

Command Mode

/exec

show ospfv3 memory

show [ ipv6 ] ospfv3 [ <tag> ] memory [ __readonly__ TABLE_mem <ptag> <byte_total> <byte_consumed> <byte_overhead> <byte_allocated> <alloc_current> <alloc_created> <alloc_failed> <alloc_free> <bf_current> <bf_created> <bf_failed> <bf_free> <bf_byte_consumed> <bf_32_current> <bf_32_created> <bf_32_failed> <bf_32_free> <bf_32_byte_consumed> <slab_current> <slab_created> <slab_failed> <slab_free> <slab_byte_consumed> <if_index_alloc_failed> <nbr_index_alloc_failed> ]

Syntax Description


show	Show running system information
ipv6	(Optional) Display IPv6 information
ospfv3	Display OSPFv3 status and configuration
tag	(Optional) Process tag
memory	Memory usage statistics
__readonly__	(Optional)
TABLE_mem	(Optional)
ptag	(Optional)
byte_total	(Optional)
byte_consumed	(Optional)
byte_overhead	(Optional)
byte_allocated	(Optional)
alloc_current	(Optional)
alloc_created	(Optional)
alloc_failed	(Optional)
alloc_free	(Optional)
bf_current	(Optional)
bf_created	(Optional)
bf_failed	(Optional)
bf_free	(Optional)
bf_byte_consumed	(Optional)
bf_32_current	(Optional)
bf_32_created	(Optional)
bf_32_failed	(Optional)
bf_32_free	(Optional)
bf_32_byte_consumed	(Optional)
slab_current	(Optional)
slab_created	(Optional)
slab_failed	(Optional)
slab_free	(Optional)
slab_byte_consumed	(Optional)
if_index_alloc_failed	(Optional)
nbr_index_alloc_failed	(Optional)

Command Mode

/exec

show ospfv3 neighbors

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] neighbors [ { { <interface> [ <neighbor> | <neighbor-name> ] } | { [ <neighbor> | <neighbor-name> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] } } ] [ __readonly__ TABLE_ctx <ptag> <cname> <nbrcount> [ TABLE_nbr <rid> <priority> <state> <drstate> <uptime> <ifid> <intf> [ <multiarea> ] <addr> ] ]

Syntax Description


show	Show running system information
ipv6	(Optional) Display IPv6 information
ospfv3	Display OSPFv3 status and configuration
tag	(Optional) Process tag
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
neighbors	Neighbor list
interface	(Optional) OSPF enabled interface
neighbor	(Optional) Router ID of neighbor
neighbor-name	(Optional) DNS Name of the neighbor
__readonly__	(Optional)
TABLE_ctx	(Optional)
ptag	(Optional)
cname	(Optional)
nbrcount	(Optional)
TABLE_nbr	(Optional)
rid	(Optional)
priority	(Optional)
state	(Optional)
drstate	(Optional)
uptime	(Optional)
ifid	(Optional)
intf	(Optional)
multiarea	(Optional)

Command Mode

/exec

show ospfv3 neighbors detail

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] neighbors [ <interface> ] [ <neighbor> ] detail [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ private ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_nbr <rid> <addr> <area> <intf> <state> <transition> <lastchange> [ <bfd_state> ] [ <priority> ] [ <ifid> ] [ <dr> ] [ <bdr> ] [ <master> ] [ <seqno> ] [ <dbdallsentacked> ] [ <dbdallsent> ] [ <dbdallacked> ] [ <lsaonreqlist> ] [ <lsafromlastreq> ] [ <lsreqrxmts> ] <helloptions> <dbdoptions> <lastnonhello> [ <deadtimer> ] [ <pacingtimer> ] [ <dbdrxmtimer> ] [ <reqrxmtimer> ] [ <lsutimer> ] [ <rerxmtimer> ] [ <fastrerxmtimer> ] [ <lsacktimer> ] [ <grtimer> ] [ <helpermode> ] [ <helpercand> ] [ <helperterm> ] [ <senddbd> ] [ <sendlsreq> ] [ <sendlsu> ] [ <sendlsurxmt> ] [ <sendlsack> ] [ <sendlsreqreply> ] ] ]

Syntax Description


show	Show running system information
ipv6	(Optional) Display IPv6 information
ospfv3	Display OSPFv3 status and configuration
tag	(Optional) Process tag
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
neighbors	Neighbor list
interface	(Optional) OSPF enabled interface
neighbor	(Optional) Router ID of neighbor
detail	Show detailed neighbor display
private	(Optional) Developer-only statistics
__readonly__	(Optional)
TABLE_ctx	(Optional)
ptag	(Optional)
cname	(Optional)
TABLE_nbr	(Optional)
rid	(Optional)
area	(Optional)
intf	(Optional)
state	(Optional)
transition	(Optional)
lastchange	(Optional)
bfd_state	(Optional)
priority	(Optional)
ifid	(Optional)
dr	(Optional)
bdr	(Optional)
master	(Optional)
seqno	(Optional)
dbdallsentacked	(Optional)
dbdallsent	(Optional)
dbdallacked	(Optional)
lsaonreqlist	(Optional)
lsafromlastreq	(Optional)
lsreqrxmts	(Optional)
helloptions	(Optional)
dbdoptions	(Optional)
lastnonhello	(Optional)
deadtimer	(Optional)
pacingtimer	(Optional)
dbdrxmtimer	(Optional)
reqrxmtimer	(Optional)
lsutimer	(Optional)
rerxmtimer	(Optional)
fastrerxmtimer	(Optional)
lsacktimer	(Optional)
grtimer	(Optional)
helpermode	(Optional)
helpercand	(Optional)
helperterm	(Optional)
senddbd	(Optional)
sendlsreq	(Optional)
sendlsu	(Optional)
sendlsurxmt	(Optional)
sendlsack	(Optional)
sendlsreqreply	(Optional)

Command Mode

/exec

show ospfv3 neighbors summary

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] neighbors [ <interface> ] summary [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> TABLE_intf { <ifname> | <total> } <down> <attempt> <init> <twoway> <exstart> <exchange> <loading> <full> <if_total> ]

Syntax Description


show	Show running system information
ipv6	(Optional) Display IPv6 information
ospfv3	Display OSPFv3 status and configuration
tag	(Optional) Process tag
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
neighbors	Neighbor list
interface	(Optional) OSPF enabled interface
summary	Summary of neighbors
__readonly__	(Optional)
TABLE_ctx	(Optional)
ptag	(Optional)
cname	(Optional)
TABLE_intf	(Optional)
ifname	(Optional)
total	(Optional)
down	(Optional)
attempt	(Optional)
init	(Optional)
twoway	(Optional)
exstart	(Optional)
exchange	(Optional)
loading	(Optional)
full	(Optional)
if_total	(Optional)

Command Mode

/exec

show ospfv3 policy statistics

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] policy statistics { { redistribute { bgp <as> | { isis | rip } <tag> | static | direct | amt } } | { area <area-id-ip> filter-list { in | out } } } [ vrf { <vrf-name> | <vrf-known-name> | all } ]

Syntax Description


show	Show running system information
ipv6	(Optional) Display IPv6 information
ospfv3	Display OSPFv3 status and configuration
tag	(Optional) Process tag
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
policy	Display Policy related information
statistics	Display Route Filter statistics
redistribute	Statistics for redistribution
rip	Routing Information Protocol (RIP)
isis	ISO Intermediate-to-Intermediate (IS-IS)
bgp	Border Gateway Protocol (BGP)
as	Autonomous system number
static	Static
direct	Directly connected
amt	AMT anycast prefix
area	Configure area properties
area-id-ip	Area Id as an integer or ip address
filter-list	Filter prefixes between OSPF areas
in	Filter networks sent to this area
out	Filter networks sent from this area
tag

Command Mode

/exec

show ospfv3 request-list

show [ ipv6 ] ospfv3 [ <tag> ] request-list { <ip-addr> | <neighbor-name> } <interface> [ __readonly__ [ TABLE_ctx <ptag> <cname> [ TABLE_lsreq <nbr_rid> <intf> <nbr_addr> <total> [ TABLE_lsa [ <type> ] [ <lsid> ] [ <advrtr> ] [ <seqno> ] [ <cksum> ] [ <age> ] ] ] ] ]

Syntax Description


show	Show running system information
ipv6	(Optional) Display IPv6 information
ospfv3	Display OSPFv3 status and configuration
tag	(Optional) Process tag
request-list	Link state request list
interface	OSPF enabled interface
ip-addr	Neighbor router ID
neighbor-name	DNS Name of the neighbor
__readonly__	(Optional)
TABLE_ctx	(Optional)
ptag	(Optional)
cname	(Optional)
TABLE_lsreq	(Optional)
nbr_rid	(Optional)
intf	(Optional)
total	(Optional)
TABLE_lsa	(Optional)
type	(Optional)
lsid	(Optional)
advrtr	(Optional)
seqno	(Optional)
cksum	(Optional)
age	(Optional)

Command Mode

/exec

show ospfv3 retransmission-list

show [ ipv6 ] ospfv3 [ <tag> ] retransmission-list { <routerid> | <router-name> } <interface> [ __readonly__ [ TABLE_ctx <ptag> <cname> [ TABLE_rxmit <nbr_rid> <intf> <nbr_addr> [ <timer_running> ] [ <timer_due> ] [ TABLE_lsa [ <type> ] [ <lsid> ] [ <advrtr> ] [ <seqno> ] [ <cksum> ] [ <age> ] ] ] ] ]

Syntax Description


show	Show running system information
ipv6	(Optional) Display IPv6 information
ospfv3	Display OSPFv3 status and configuration
tag	(Optional) Process tag
retransmission-list	Link state retransmission list
routerid	Neighbor router ID
router-name	DNS Name of the router
interface	OSPF enabled interface
__readonly__	(Optional)
TABLE_ctx	(Optional)
ptag	(Optional)
cname	(Optional)
TABLE_rxmit	(Optional)
nbr_rid	(Optional)
intf	(Optional)
timer_running	(Optional)
timer_due	(Optional)
TABLE_lsa	(Optional)
type	(Optional)
lsid	(Optional)
advrtr	(Optional)
seqno	(Optional)
cksum	(Optional)
age	(Optional)

Command Mode

/exec

show ospfv3 route

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] route [ <ipv6-prefix> [ longer-prefixes ] ] [ all_routes ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> [ <hdr_addr> ] [ <hdr_masklen> ] [ TABLE_route <addr> <masklen> <type> <in_rib> <direct> [ <area> ] [ <tag> ] [ <vlink_unresolved> ] [ TABLE_route_ubest_nh [ <ubest_nh_addr> ] [ <ubest_nh_intf> ] [ <ubest_cost> ] [ <distance> ] [ <ubest_nh_direct> ] [ <ubest_nh_in_rib> ] ] [ TABLE_route_mbest_nh [ <mbest_nh_addr> ] [ <mbest_nh_intf> ] [ <mbest_cost> ] [ <mbest_nh_direct> ] [ <mbest_nh_in_rib> ] ] ] ]

Syntax Description


show	Show running system information
ipv6	(Optional) Display IPv6 information
ospfv3	Display OSPFv3 status and configuration
tag	(Optional) Process tag
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
route	Internal OSPF routes
longer-prefixes	(Optional) Show exact match and more specific routes
all_routes	(Optional) Display all OSPFv3 routes
tag	(Optional)
__readonly__	(Optional)
TABLE_ctx	(Optional)
ptag	(Optional)
cname	(Optional)
hdr_masklen	(Optional)
TABLE_route	(Optional)
masklen	(Optional)
type	(Optional)
in_rib	(Optional)
direct	(Optional)
area	(Optional)
vlink_unresolved	(Optional)
TABLE_route_ubest_nh	(Optional)
ubest_nh_intf	(Optional)
ubest_cost	(Optional)
distance	(Optional)
ubest_nh_direct	(Optional)
ubest_nh_in_rib	(Optional)
TABLE_route_mbest_nh	(Optional)
mbest_nh_intf	(Optional)
mbest_cost	(Optional)
mbest_nh_direct	(Optional)
mbest_nh_in_rib	(Optional)

Command Mode

/exec

show ospfv3 route summary

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] route [ <ipv6-prefix> [ longer-prefixes ] ] summary [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_route <total_routes> <total_paths> [ TABLE_route_type <path_type> <path_routes> <path_paths> ] [ TABLE_route_masklen <masklen> <masklen_routes> <masklen_paths> ] ] ]

Syntax Description


show	Show running system information
ipv6	(Optional) Display IPv6 information
ospfv3	Display OSPFv3 status and configuration
tag	(Optional) Process tag
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
route	Internal OSPF routes
longer-prefixes	(Optional) Show exact match and more specific routes
summary	Show route counts
__readonly__	(Optional)
TABLE_ctx	(Optional)
ptag	(Optional)
cname	(Optional)
TABLE_route	(Optional)
total_routes	(Optional)
total_paths	(Optional)
TABLE_route_type	(Optional)
path_type	(Optional)
path_routes	(Optional)
path_paths	(Optional)
TABLE_route_masklen	(Optional)
masklen	(Optional)
masklen_routes	(Optional)
masklen_paths	(Optional)

Command Mode

/exec

show ospfv3 statistics

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] statistics [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_stats <ptag> <cname> <last_clear> <rid_change> <dr_elections> <older_lsa_recv> <nbr_state_change> <nbr_dead_postpone> <nbr_dead_expire> <nbr_bad_lsreq> <nbr_seqno_mismatch> <spf_full> <spf_summary> <spf_external> <spf_extsummary> <rtr_generate> <rtr_refresh> <rtr_flush> <rtr_other_flush> <net_generate> <net_refresh> <net_flush> <net_other_flush> <inter_prefix_generate> <inter_prefix_refresh> <inter_prefix_flush> <inter_prefix_other_flush> <inter_router_generate> <inter_router_refresh> <inter_router_flush> <inter_router_other_flush> <asext_generate> <asext_refresh> <asext_flush> <asext_other_flush> <link_generate> <link_refresh> <link_flush> <link_other_flush> <intra_prefix_generate> <intra_prefix_refresh> <intra_prefix_flush> <intra_prefix_other_flush> <unknown_generate> <unknown_refresh> <unknown_flush> <unknown_other_flush> <limbo_lsa_count> <limbo_lsa_hwm> <limbo_lsa_deleted> <limbo_lsa_revived> <limbo_runs> <limbo_lsa_last_time_hwm> [ <limbo_timer> ] <helloq_size> <helloq_max_size> <helloq_hwm> <helloq_drops> <helloq_last_hwm_time> <floodq_size> <floodq_max_size> <floodq_hwm> <floodq_drops> <floodq_last_hwm_time> <lsdb_add_fail> [ TABLE_buffer_detail [ <buf_size> ] [ <buf_size_huge> ] <buf_in_use> <buf_hwm> <buf_perm> <buf_alloc> <buf_free> ] ]

Syntax Description


show	Show running system information
ipv6	(Optional) Display IPv6 information
ospfv3	Display OSPFv3 status and configuration
tag	(Optional) Process tag
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
statistics	Event counters
__readonly__	(Optional)
TABLE_stats	(Optional)
ptag	(Optional)
cname	(Optional)
last_clear	(Optional)
rid_change	(Optional)
dr_elections	(Optional)
older_lsa_recv	(Optional)
nbr_state_change	(Optional)
nbr_dead_postpone	(Optional)
nbr_dead_expire	(Optional)
nbr_bad_lsreq	(Optional)
nbr_seqno_mismatch	(Optional)
spf_full	(Optional)
spf_summary	(Optional)
spf_external	(Optional)
spf_extsummary	(Optional)
rtr_generate	(Optional)
rtr_refresh	(Optional)
rtr_flush	(Optional)
rtr_other_flush	(Optional)
net_generate	(Optional)
net_refresh	(Optional)
net_flush	(Optional)
net_other_flush	(Optional)
inter_prefix_generate	(Optional)
inter_prefix_refresh	(Optional)
inter_prefix_flush	(Optional)
inter_prefix_other_flush	(Optional)
inter_router_generate	(Optional)
inter_router_refresh	(Optional)
inter_router_flush	(Optional)
inter_router_other_flush	(Optional)
asext_generate	(Optional)
asext_refresh	(Optional)
asext_flush	(Optional)
asext_other_flush	(Optional)
link_generate	(Optional)
link_refresh	(Optional)
link_flush	(Optional)
link_other_flush	(Optional)
intra_prefix_generate	(Optional)
intra_prefix_refresh	(Optional)
intra_prefix_flush	(Optional)
intra_prefix_other_flush	(Optional)
unknown_generate	(Optional)
unknown_refresh	(Optional)
unknown_flush	(Optional)
unknown_other_flush	(Optional)
limbo_lsa_count	(Optional)
limbo_lsa_hwm	(Optional)
limbo_lsa_deleted	(Optional)
limbo_lsa_revived	(Optional)
limbo_runs	(Optional)
limbo_lsa_last_time_hwm	(Optional)
limbo_timer	(Optional)
helloq_size	(Optional)
helloq_max_size	(Optional)
helloq_hwm	(Optional)
helloq_drops	(Optional)
helloq_last_hwm_time	(Optional)
floodq_size	(Optional)
floodq_max_size	(Optional)
floodq_hwm	(Optional)
floodq_drops	(Optional)
floodq_last_hwm_time	(Optional)
lsdb_add_fail	(Optional)
TABLE_buffer_detail	(Optional)
buf_size	(Optional)
buf_size_huge	(Optional)
buf_in_use	(Optional)
buf_hwm	(Optional)
buf_perm	(Optional)
buf_alloc	(Optional)
buf_free	(Optional)

Command Mode

/exec

show ospfv3 summary-address

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] summary-address [ private ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ [ TABLE_ctx <ptag> <cname> <rid> [ TABLE_sum <addr> <masklen> [ <metric> ] [ <tag> ] [ <pending> ] ] ] ]

Syntax Description


show	Show running system information
ipv6	(Optional) Display IPv6 information
ospfv3	Display OSPFv3 status and configuration
tag	(Optional) Process tag
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
summary-address	Summary-address redistribution information
private	(Optional) Developer-only statistics
tag	(Optional)
__readonly__	(Optional)
TABLE_ctx	(Optional)
ptag	(Optional)
cname	(Optional)
rid	(Optional)
TABLE_sum	(Optional)
masklen	(Optional)
metric	(Optional)
pending	(Optional)

Command Mode

/exec

show ospfv3 traffic

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] traffic [ <interface> [ detail ] | [ detail ] | [ detail ] vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_traf <ptag> <cname> <last_clear> [ <ifname> ] <pkt_in> <pkt_out> <lsu_first_trans> <lsu_retrans> <lsu_for_lsreq> <lsu_nbr_trans> <throttle_out> <throttle_out_token> <throttle_out_ip> <lsa_ignored> <lsa_dropped_spf> <lsa_dropped_gr> <pkt_drops_in> <pkt_drops_out> <pkt_errors_in> <pkt_errors_out> <hello_errors_in> <dbds_errors_in> <lsreqs_errors_in> <lsus_errors_in> <lsacks_errors_in> <pkt_unknown_in> <pkt_unknown_out> <pkt_no_ospf_intf> <bad_version> <bad_crc> <dup_rtr_id> <dup_src_addr> <invalid_src_addr> <invalid_dst_addr> <non_existing_nbr> <pkt_passive_intf> <wrong_area> <invalid_pkt_len> <nbr_changed_routerid_ipaddr> <nbr_changed_interfaceid> [ <bad_auth> ] [ <bad_reserved> ] [ <pkt_no_vrf> ] <hellos_in> <dbds_in> <lsreqs_in> <lsus_in> <lsacks_in> <hellos_out> <dbds_out> <lsreqs_out> <lsus_out> <lsacks_out> [ <hellos_in_hq> <dbds_in_hq> <lsreqs_in_flq> <lsus_in_flq> <lsacks_in_flq> <lsas_in_dbds_in> <lsas_in_lsreqs_in> <lsas_in_lsus_in> <lsas_in_lsacks_in> <lsas_in_dbds_out> <lsas_in_lsreqs_out> <lsas_in_lsus_out> <lsas_in_lsacks_out> <lsas_in_rxmt_lsus_out> ] ]

Syntax Description


show	Show running system information
ipv6	(Optional) Display IPv6 information
ospfv3	Display OSPFv3 status and configuration
tag	(Optional) Process tag
interface	(Optional) OSPF enabled interface
detail	(Optional) Display detailed information
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
traffic	Packet counters
__readonly__	(Optional)
TABLE_traf	(Optional)
ptag	(Optional)
cname	(Optional)
last_clear	(Optional)
ifname	(Optional)
pkt_in	(Optional)
pkt_out	(Optional)
lsu_first_trans	(Optional)
lsu_retrans	(Optional)
lsu_for_lsreq	(Optional)
lsu_nbr_trans	(Optional)
throttle_out	(Optional)
throttle_out_token	(Optional)
throttle_out_ip	(Optional)
lsa_ignored	(Optional)
lsa_dropped_spf	(Optional)
lsa_dropped_gr	(Optional)
pkt_drops_in	(Optional)
pkt_drops_out	(Optional)
pkt_errors_in	(Optional)
pkt_errors_out	(Optional)
hello_errors_in	(Optional)
dbds_errors_in	(Optional)
lsreqs_errors_in	(Optional)
lsus_errors_in	(Optional)
lsacks_errors_in	(Optional)
pkt_unknown_in	(Optional)
pkt_unknown_out	(Optional)
pkt_no_ospf_intf	(Optional)
bad_version	(Optional)
bad_crc	(Optional)
dup_rtr_id	(Optional)
dup_src_addr	(Optional)
invalid_src_addr	(Optional)
invalid_dst_addr	(Optional)
non_existing_nbr	(Optional)
pkt_passive_intf	(Optional)
wrong_area	(Optional)
invalid_pkt_len	(Optional)
nbr_changed_routerid_ipaddr	(Optional)
nbr_changed_interfaceid	(Optional)
bad_auth	(Optional)
bad_reserved	(Optional)
pkt_no_vrf	(Optional)
hellos_in	(Optional)
dbds_in	(Optional)
lsreqs_in	(Optional)
lsus_in	(Optional)
lsacks_in	(Optional)
hellos_out	(Optional)
dbds_out	(Optional)
lsreqs_out	(Optional)
lsus_out	(Optional)
lsacks_out	(Optional)
hellos_in_hq	(Optional)
dbds_in_hq	(Optional)
lsreqs_in_flq	(Optional)
lsus_in_flq	(Optional)
lsacks_in_flq	(Optional)
lsas_in_dbds_in	(Optional)
lsas_in_lsreqs_in	(Optional)
lsas_in_lsus_in	(Optional)
lsas_in_lsacks_in	(Optional)
lsas_in_dbds_out	(Optional)
lsas_in_lsreqs_out	(Optional)
lsas_in_lsus_out	(Optional)
lsas_in_lsacks_out	(Optional)
lsas_in_rxmt_lsus_out	(Optional)

Command Mode

/exec

show ospfv3 virtual-links

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] virtual-links [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> [ TABLE_vlink <name> <nbr_rid> <if_state> <transit_area> <nh_intf> <nbr_addr> [ <transit_area_stub> ] [ <transit_area_nssa> ] <addr> [ <masklen> ] <inst_id> <area> [ <if_cfg> ] <state_str> <type_str> <cost> <index> [ <passive> ] [ <mpls> ] [ <transmit_delay> ] [ <if_priority> ] [ <dr_rid> ] [ <dr_addr> ] [ <bdr_rid> ] [ <bdr_addr> ] [ <nbr_total> ] [ <nbr_flood> ] [ <nbr_adjs> ] [ <gr_nbr> ] [ <hello_interval> ] [ <dead_interval> ] [ <wait_interval> ] [ <rxmt_interval> ] [ <hello_timer> ] [ <wait_timer> ] [ <pacing_timer> ] [ <lsu_timer> ] [ <lsack_timer> ] [ <netlsa_throt_timer> ] [ <link_lsa_cnt> ] [ <link_lsa_crc> ] [ <state> ] [ <transition> ] [ <lastchange> ] [ <priority> ] [ <ifid> ] [ <dr> ] [ <bdr> ] [ <master> ] [ <seqno> ] [ <dbdallsentacked> ] [ <dbdallsent> ] [ <dbdallacked> ] [ <lsaonreqlist> ] [ <lsafromlastreq> ] [ <lsreqrxmts> ] [ <helloptions> ] [ <dbdoptions> ] [ <lastnonhello> ] [ <deadtimer> ] [ <pacingtimer> ] [ <dbdrxmtimer> ] [ <reqrxmtimer> ] [ <lsutimer> ] [ <rerxmtimer> ] [ <fastrerxmtimer> ] [ <lsacktimer> ] [ <grtimer> ] [ <helpermode> ] [ <helpercand> ] [ <helperterm> ] [ <senddbd> ] [ <sendlsreq> ] [ <sendlsu> ] [ <sendlsurxmt> ] [ <sendlsack> ] [ <sendlsreqreply> ] [ <ipsec_sa_type> ] [ <ipsec_sa_algorithm> ] [ <ipsec_sa_spi> ] ] ]

Syntax Description


show	Show running system information
ipv6	(Optional) Display IPv6 information
ospfv3	Display OSPFv3 status and configuration
tag	(Optional) Process tag
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
virtual-links	Virtual link information
__readonly__	(Optional)
TABLE_ctx	(Optional)
ptag	(Optional)
cname	(Optional)
TABLE_vlink	(Optional)
name	(Optional)
nbr_rid	(Optional)
if_state	(Optional)
transit_area	(Optional)
nh_intf	(Optional)
transit_area_stub	(Optional)
transit_area_nssa	(Optional)
masklen	(Optional)
inst_id	(Optional)
area	(Optional)
if_cfg	(Optional)
state_str	(Optional)
type_str	(Optional)
cost	(Optional)
index	(Optional)
passive	(Optional)
mpls	(Optional)
transmit_delay	(Optional)
if_priority	(Optional)
dr_rid	(Optional)
bdr_rid	(Optional)
nbr_total	(Optional)
nbr_flood	(Optional)
nbr_adjs	(Optional)
gr_nbr	(Optional)
hello_interval	(Optional)
dead_interval	(Optional)
wait_interval	(Optional)
rxmt_interval	(Optional)
hello_timer	(Optional)
wait_timer	(Optional)
pacing_timer	(Optional)
lsu_timer	(Optional)
lsack_timer	(Optional)
netlsa_throt_timer	(Optional)
link_lsa_cnt	(Optional)
link_lsa_crc	(Optional)
state	(Optional)
transition	(Optional)
lastchange	(Optional)
priority	(Optional)
ifid	(Optional)
dr	(Optional)
bdr	(Optional)
master	(Optional)
seqno	(Optional)
dbdallsentacked	(Optional)
dbdallsent	(Optional)
dbdallacked	(Optional)
lsaonreqlist	(Optional)
lsafromlastreq	(Optional)
lsreqrxmts	(Optional)
helloptions	(Optional)
dbdoptions	(Optional)
lastnonhello	(Optional)
deadtimer	(Optional)
pacingtimer	(Optional)
dbdrxmtimer	(Optional)
reqrxmtimer	(Optional)
lsutimer	(Optional)
rerxmtimer	(Optional)
fastrerxmtimer	(Optional)
lsacktimer	(Optional)
grtimer	(Optional)
helpermode	(Optional)
helpercand	(Optional)
helperterm	(Optional)
senddbd	(Optional)
sendlsreq	(Optional)
sendlsu	(Optional)
sendlsurxmt	(Optional)
sendlsack	(Optional)
sendlsreqreply	(Optional)
ipsec_sa_type	(Optional) IPsec SA Type
ipsec_sa_algorithm	(Optional) IPsec SA Algorithm name
ipsec_sa_spi	(Optional) IPsec SA SPI Value

Command Mode

/exec

show ospfv3 virtual-links brief

show [ ipv6 ] ospfv3 [ <tag> ] [ vrf { <vrf-name> | <vrf-known-name> | all } ] virtual-links brief [ vrf { <vrf-name> | <vrf-known-name> | all } ] [ __readonly__ TABLE_ctx <ptag> <cname> <vlink_count> [ TABLE_vlink <nbr_rid> <vlink_num> <transit_area> <cost> <if_state> ] ]

Syntax Description


show	Show running system information
ipv6	(Optional) Display IPv6 information
ospfv3	Display OSPFv3 status and configuration
tag	(Optional) Process tag
vrf	(Optional) Display per-VRF information
vrf-name	(Optional) VRF name
vrf-known-name	(Optional) Known VRF name
all	(Optional) Display information for all VRFs
virtual-links	Virtual link information
brief	Display summary of OSPFv3 virtual links
__readonly__	(Optional)
TABLE_ctx	(Optional)
ptag	(Optional)
cname	(Optional)
vlink_count	(Optional)
TABLE_vlink	(Optional)
nbr_rid	(Optional)
vlink_num	(Optional)
transit_area	(Optional)
cost	(Optional)
if_state	(Optional)

Command Mode

/exec

Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 9.2(x)

Bias-Free Language

Book Title

Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 9.2(x)

Chapter Title

O Show Commands

Results

Chapter: O Show Commands

O Show Commands

show object-group

show openflow hardware capabilities

show openflow switch

show openflow switch flows

show ospfv3

show ospfv3 border-routers

show ospfv3 database

show ospfv3 database database-summary

show ospfv3 database detail

show ospfv3 event-history

show ospfv3 event-history detail

show ospfv3 ha

show ospfv3 interface

show ospfv3 interface brief

show ospfv3 lsa-content-changed-list

show ospfv3 memory

show ospfv3 neighbors

show ospfv3 neighbors detail

show ospfv3 neighbors summary

show ospfv3 policy statistics

show ospfv3 request-list

show ospfv3 retransmission-list

show ospfv3 route

show ospfv3 route summary

show ospfv3 statistics

show ospfv3 summary-address

show ospfv3 traffic

show ospfv3 virtual-links

show ospfv3 virtual-links brief

Was this Document Helpful?

Contact Cisco