W Show Commands

show wred-queue qos-group-map

show wred-queue qos-group-map [ __readonly__ TABLE_wred_queue_qos_group_map <wred-queue><qos-group-map> ]

Syntax Description

show

Show running system information

wred-queue

Show WRED qos-group information

qos-group-map

Display mapping of the qos-group information

__readonly__

(Optional)

TABLE_wred_queue_qos_group_map

(Optional) XML show wred-queue qos-group-map

Command Mode

  • /exec

show wrr-queue qos-group-map

show wrr-queue qos-group-map [ __readonly__ <mcast_queue_id> [ TABLE_wrr_queue <wrr_queue> [ TABLE_qos_group <qos_group> ] ] ]

Syntax Description

show

Show running system information

wrr-queue

Display mapping of traffic priority (CoS) values to L3 Multicast

qos-group-map

Show wrr-queue qos-group-map

__readonly__

(Optional)

mcast_queue_id

(Optional) MCAST Queue ID

TABLE_wrr_queue

(Optional) Table wrr queue

wrr_queue

(Optional) Traffic priority values

TABLE_qos_group

(Optional) Table qos group

qos_group

(Optional) QoS-Group-Map

Command Mode

  • /exec

show wrr unicast-bandwidth

show wrr unicast-bandwidth [ __readonly__ TABLE_wrr_unicast_bandwidth <unicast-bandwidth> ]

Syntax Description

show

Show running system information

wrr

unicast bandwidth configuration

unicast-bandwidth

rate in precentage of data rate

__readonly__

(Optional)

TABLE_wrr_unicast_bandwidth

(Optional) XML show wrr unicast-bandwidth

unicast-bandwidth

(Optional) unicast bandwidth value

Command Mode

  • /exec

show wwn interface

show wwn interface <if0>

Syntax Description

show

Show running system information

wwn

show wwn information

interface

Show interface WWN

if0

Command Mode

  • /exec

show wwn status

show wwn status [ { backplane-prom | block-id <i0> | non-volatile-pss | volatile-pss } ] [ __readonly__ [ TABLE_status <type> <configured> <available> <avbl_percent> <resd> <alarm> ] [ <wwn_start> <wwn_end> <num_of_wwn> <allocated_wwn> <available_wwn> <alloc_status> ] ]

Syntax Description

show

Show running system information

wwn

show wwn information

status

Show overall WWN Usage and Alarm Status

backplane-prom

(Optional) Show WWN block in backplane PROM

block-id

(Optional) Enter a block id.

i0

(Optional) Enter a block id.

non-volatile-pss

(Optional) Show contents of non-volatile PSS

volatile-pss

(Optional) Show contents of volatile PSS

__readonly__

(Optional) Read Only

TABLE_status

(Optional) show wwn status table

type

(Optional) WWN Type

configured

(Optional) Number of Confugured WWNs

available

(Optional) Number of Available WWNs

avbl_percent

(Optional) Available % of WWNs

resd

(Optional) Reserved WWNs

alarm

(Optional) Alarm State

wwn_start

(Optional) Start value of WWN-range

wwn_end

(Optional) End value of WWN-range

num_of_wwn

(Optional) Total Number of WWNs

allocated_wwn

(Optional) Number of Allocated WWNs

available_wwn

(Optional) Number of Available WWNs

alloc_status

(Optional) Block Allocation Status

Command Mode

  • /exec

show wwn switch

show wwn switch [ __readonly__ { <sw_wwn> } ]

Syntax Description

show

Show running system information

wwn

show wwn information

switch

Show switch WWN

__readonly__

(Optional) Read Only

sw_wwn

(Optional) The Switch WWN

Command Mode

  • /exec

show wwn test

show wwn test { get_swwn_from_pwwn <wwn0> | get_pwwn_from_swwn <wwn1> if_index <i0> | get_ifindex_from_fwwn <wwn2> | get_ifindex_from_pwwn <wwn3> | validate_pwwn_given_swwn <wwn4> pwwn <wwn5> | get_all_pwwn_for_slot <i1> | get_kc_type_given_swwn <wwn6> pwwn <wwn7> | get_ifindex_from_pwwn_swwn <wwn8> pwwn <wwn9> }

Syntax Description

show

show running system information

wwn

show wwn information

test

show wwn information for testing

get_swwn_from_pwwn

show switch wwn from port wwn

wwn0

port wwn

get_pwwn_from_swwn

show port wwn from switch wwn

wwn1

switch wwn

if_index

interface index

i0

Interface index

get_ifindex_from_fwwn

show ifindex from fabric wwn

wwn2

fabric wwn

get_ifindex_from_pwwn

show ifindex from port wwn

wwn3

port wwn

validate_pwwn_given_swwn

validate port wwn for given swwn

wwn4

switch wwn

pwwn

port wwn

wwn5

port wwn

get_all_pwwn_for_slot

show all port wwn for a given slot

i1

Slot number

get_kc_type_given_swwn

show KC type

wwn6

switch wwn

pwwn

port wwn

wwn7

port wwn

get_ifindex_from_pwwn_swwn

show ifindex for given pwwn and swwn

wwn8

switch wwn

pwwn

port wwn

wwn9

port wwn

Command Mode

  • /exec

show wwn vsan-wwn

show wwn vsan-wwn [ __readonly__ [ TABLE_wwnvsan <vsan_id> <wwn_conf> ] ]

Syntax Description

show

Show running system information

wwn

show wwn information

vsan-wwn

Show all user configured vsan wwn

__readonly__

(Optional) Read Only

TABLE_wwnvsan

(Optional) vsan-wwn table

vsan_id

(Optional) VSAN ID

wwn_conf

(Optional) wwn configured by user

Command Mode

  • /exec

show wwn vsan

show wwn vsan <i0>

Syntax Description

show

Show running system information

wwn

show wwn information

vsan

Show vsan WWN

i0

Command Mode

  • /exec