L Show Commands

show l2 mroute

show { l2 | fabricpath } mroute { [ vdc-omf ] { [ resolved ] } | [ vlan <vlanid> ] { { [ omf ] | [ flood ] | [ source { <srcaddr> | <v6srcaddr> | <macsrcaddr> } ] [ group { <groupaddr> | <v6groupaddr> | <macgroupaddr> } ] } [ resolved ] [ ftag <ftag-id> ] [ hex ] } } [ __readonly__ [ <hex2> ] { TABLE_gr [ <ftag> ] <vlan_id> [ { <v4src> <v4grp> <macgrp> | <v6src> <v6grp> <macsrc> } ] [ <omf> | <flood> ] <rt-uptime> <owners> <num_nh> TABLE_nh { <nh_if> | <nh_sw> } [ <stale> ] [ <exclude> ] [ <svi> ] <flags> <nh-uptime> <owner> <rt_type> | <done> | <start> } ]

Syntax Description

show

Show running system information

l2

Layer2 information

fabricpath

fabricpath information

mroute

Show multicast route database

vdc-omf

(Optional) Display vdc omf route

vlan

(Optional) Show information for a vlan

omf

(Optional) Show catch-all entry consisting of mroute ports

flood

(Optional) Display vlan flood route

ftag

(Optional) Show ftag number

source

(Optional) Show (s, g) source IP address

group

(Optional) Show group address

hex

(Optional) Display switch-ids in hex

vlanid

(Optional) Vlan value

ftag-id

(Optional) ftag id

groupaddr

(Optional) Group address

macgroupaddr

(Optional) MAC Group address

srcaddr

(Optional) Source address

macsrcaddr

(Optional) MAC source address

resolved

(Optional) Resolve switchid nexthops into the underlying interfaces

__readonly__

(Optional) Read Only

hex2

(Optional)

TABLE_gr

(Optional)

vlan_id

(Optional) VLAN

rt-uptime

(Optional) Time route was created

num_nh

(Optional) Number of next-hops

owners

(Optional) Owners

v4src

(Optional) IPv4 Multicast traffic source

v4grp

(Optional) IPv4 Multicast Group address

macsrc

(Optional) MAC Multicast traffic source

macgrp

(Optional) MAC Multicast Group address

ftag

(Optional) ftag id

omf

(Optional) Is OMF route

flood

(Optional) Is flood to vlan route

TABLE_nh

(Optional)

nh_if

(Optional) The next hop interface

nh_sw

(Optional) The next hop switch id

owner

(Optional) Owner

flags

(Optional) flags

nh-uptime

(Optional) Time nexthop was created

rt_type

(Optional) Route type

stale

(Optional) Is stale

exclude

(Optional) exclude from post routing replication

svi

(Optional) SVI interface

done

(Optional) Done displaying route data

start

(Optional) Print header

Command Mode

  • /exec

show l2 multicast ftag

show { l2 | fabricpath } multicast ftag [ <ftag-id> ] [ __readonly__ TABLE_topo <id> <topo_config> TABLE_ftag <ftag> <topo_id> <config> ]

Syntax Description

show

Show running system information

l2

Layer2 information

fabricpath

fabricpath information

multicast

Multicast information

ftag

ftag number

ftag-id

(Optional) ftag id

__readonly__

(Optional) Read Only

TABLE_topo

(Optional)

id

(Optional) topo id

topo_config

(Optional) program ftag star route

TABLE_ftag

(Optional)

ftag

(Optional) ftag

topo_id

(Optional) topo id

config

(Optional) ftag config

Command Mode

  • /exec

show l2 multicast trees

show { l2 | fabricpath } multicast trees [ topo <topo-id> ] [ ftag <ftag-id> ] [ hex ] [ __readonly__ [ <hex2> ] { TABLE_swid <ftag> <topo_id> <sw_id> <rt-uptime> <owners> <num_nh> TABLE_nh [ <preferred> ] { <nh_if> | <nh_sw> } [ <stale> ] <distance> <nh-uptime> <owner> <flags> <rt_type> | <start> | <done> } ]

Syntax Description

show

Show running system information

l2

Layer2 information

fabricpath

fabricpath information

multicast

Multicast information

trees

Show the broadcast/multicast tree database

topo

(Optional) Show topo instance

ftag

(Optional) Show ftag number

hex

(Optional) Display switch-ids in hex

topo-id

(Optional) topo id

ftag-id

(Optional) ftag id

__readonly__

(Optional) Read Only

hex2

(Optional)

TABLE_swid

(Optional)

sw_id

(Optional) switch id

topo_id

(Optional) topo id

ftag

(Optional) ftag id

rt-uptime

(Optional) Time route was created

num_nh

(Optional) Number of next-hops

owners

(Optional) Owners

TABLE_nh

(Optional)

preferred

(Optional) Is preferred interface

nh_if

(Optional) The next hop interface

nh_sw

(Optional) The next hop switch id

owner

(Optional) Owner

flags

(Optional) flags

rt_type

(Optional) Route type

nh-uptime

(Optional) Time nexthop was created

distance

(Optional) admin distance

stale

(Optional) Is stale

start

(Optional)

done

(Optional)

Command Mode

  • /exec

show l2 route

show { l2 | fabricpath } route [ topology { <topo_val> [ switchid <switchid> ] | all } | switchid <switchid> ] [ detail | hex ] + [ __readonly__ <line_marker> <is_hex> { TABLE_route <topo_id> <ftag_value> <swid> <sswid> <num_paths> { TABLE_path <path_str> <admin_distance> <metric> <time> <time_detail> <uuid> } } ]

Syntax Description

show

Show running system information

l2

Layer2 information

fabricpath

fabricpath information

route

Show FabricPath route information

topology

(Optional) topology

topo_val

(Optional) topology value

switchid

(Optional) switchid

switchid

(Optional) switchid value

all

(Optional) all topologies

detail

(Optional) detail

hex

(Optional) display in hex

__readonly__

(Optional) Read Only

line_marker

(Optional) line marker

is_hex

(Optional) print in hex

TABLE_route

(Optional) Route delimiter

topo_id

(Optional) topo-id value

ftag_value

(Optional) ftag value

swid

(Optional) switch-id

sswid

(Optional) sub-switch id

num_paths

(Optional) num of paths

TABLE_path

(Optional) Path delimiter

path_str

(Optional) paths

admin_distance

(Optional) admin distance

metric

(Optional) metric

time

(Optional) time

time_detail

(Optional) time_detail

uuid

(Optional) uuid

Command Mode

  • /exec

show l2fwder l2rib info

show l2fwder l2rib info

Syntax Description

show

Show running system information

l2fwder

L2 software forwarding

l2rib

L2RIB

info

stats and info

Command Mode

  • /exec

show l2fwder statistics

show l2fwder statistics

Syntax Description

show

Show running system information

l2fwder

Display L2FWDER forwarding information

statistics

Show L2FWDER packet counters

Command Mode

  • /exec

show l2rib clients

show l2rib clients [ <client_id> ] [ __readonly__ TABLE_l2rib_clients <client-id> <uuid> <process-suffix> ]

Syntax Description

show

Show running system information

l2rib

Layer 2 routing information base

clients

L2RIB Clients

client_id

(Optional) Enter Client ID

__readonly__

(Optional)

TABLE_l2rib_clients

(Optional) L2RIB Clients Table

client-id

(Optional) Client ID

uuid

(Optional) Process ID

process-suffix

(Optional) Process Name Suffix

Command Mode

  • /exec

show l2rib producers

show l2rib producers [ { topology | mac | mac-ip | ead | pl | imet | flood-list | startup-route | peerid | es } [ static | local | bgp | vxlan | hmm | arp | ofa | lisp ] ] [ detail ] [ __readonly__ TABLE_l2rib_producers <prod-name> <prod-id> <client-id> <obj-type> <admin-dist> <purge-time> <state> [ <prod-flags> ] ]

Syntax Description

show

Show running system information

l2rib

Layer 2 routing information base

producers

L2RIB Producers

detail

(Optional) Detailed information

topology

(Optional) Filter on Topology

mac

(Optional) Filter on MAC

mac-ip

(Optional) Filter on MAC-IP

ead

(Optional) Filter on Ethernet-AD

pl

(Optional) Filter on Path List

imet

(Optional) Filter on IMET Route

flood-list

(Optional) Filter on Flood List

startup-route

(Optional) Filter on Startup Route

peerid

(Optional) Filter on Peerid

es

(Optional) Filter on ES

static

(Optional) Static

local

(Optional) Local

bgp

(Optional) BGP

vxlan

(Optional) VXLAN

hmm

(Optional) HMM

arp

(Optional) ARP

ofa

(Optional) OFA

lisp

(Optional) lisp

__readonly__

(Optional)

TABLE_l2rib_producers

(Optional) L2RIB Producers Table

prod-name

(Optional) Producer Name

prod-id

(Optional) Producer ID

client-id

(Optional) Client ID

obj-type

(Optional) Object Type

admin-dist

(Optional) Admin Distance

purge-time

(Optional) Purge Time

state

(Optional) State

prod-flags

(Optional) Global Producer Flags

Command Mode

  • /exec

show l2rib registrations

show l2rib registrations [ client <client_id> [ <topo_id> { mac | mac-ip | ead | pl | imet | flood-list | arp-signal | startup-route | topo | es } ] ] [ __readonly__ TABLE_l2rib_registrations <client-id> <topo-id> <obj-type> <prod> ]

Syntax Description

show

Show running system information

l2rib

Layer 2 routing information base

registrations

L2RIB Registrations

client

(Optional) Global Registraion Entries

client_id

(Optional) Enter Client ID

topo_id

(Optional) Enter Topology ID

mac

(Optional) Filter on MAC

mac-ip

(Optional) Filter on MAC-IP

ead

(Optional) Filter on Ethernet-AD

pl

(Optional) Filter on Path List

imet

(Optional) Filter on IMET Route

es

(Optional) Filter on Ethernet Segment ID

flood-list

(Optional) Filter on Flood List

startup-route

(Optional) Filter on Startup Route

arp-signal

(Optional) Filter on ARP Signal

topo

(Optional) Filter on Topo Subtype

__readonly__

(Optional)

TABLE_l2rib_registrations

(Optional) L2RIB Registrations Table

client-id

(Optional) Client ID

topo-id

(Optional) Topology ID

obj-type

(Optional) Object Type

prod

(Optional) Producer

Command Mode

  • /exec

show l2route evpn ead all

show l2route evpn ead all [ detail ] [ __readonly__ TABLE_l2route_evpn_ead_all <topo-id> <prod> <esi> <client-nfn> <num_pls> [ { <next-hop> } ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

ead

EAD

all

Display all routes without filtering

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_evpn_ead_all

(Optional) L2RIB EVPN EAD All Table

topo-id

(Optional) Topology ID

prod

(Optional) Producer

esi

(Optional) ESI

client-nfn

(Optional) Client Notification Bitmap

num_pls

(Optional) Number of Path lists

next-hop

(Optional) Next Hop

Command Mode

  • /exec

show l2route evpn ethernet-segment esi

show l2route evpn ethernet-segment { esi <esi-id> | all } [ bgp | vxlan ] [ detail ] [ __readonly__ TABLE_l2route_es <ethernet-segment> <originating-rtr> <prod-name> <int-ifhdl> <client-nfn> ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

ethernet-segment

Ethernet Segment ID

esi

ESI Value

esi-id

ESI ID

all

Display all entries without filtering

bgp

(Optional) Filter on BGP producer

vxlan

(Optional) Filter on VXLAN producer

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_es

(Optional) L2RIB ES Table

ethernet-segment

(Optional) ESI

originating-rtr

(Optional) Originating Router

prod-name

(Optional) Producer Name

int-ifhdl

(Optional) Interface Handle

client-nfn

(Optional) Client Notification Bitmap

Command Mode

  • /exec

show l2route evpn fl all

show l2route evpn fl all [ detail ] [ __readonly__ TABLE_l2route_fl_all <topo-id> <peer-id> <flood-list> <is-service-node> [ <client-nfn> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

fl

Flood List

all

Display all routes without filtering

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_fl_all

(Optional) L2RIB Flood List All Table

topo-id

(Optional) Topology ID

peer-id

(Optional) Peer-ID

flood-list

(Optional) Flood List

is-service-node

(Optional) Is Service Node

client-nfn

(Optional) Client Notification Bitmap

Command Mode

  • /exec

show l2route evpn fl evi

show l2route evpn fl evi <vpn-id> [ detail ] [ __readonly__ TABLE_l2route_fl <peer-id> <flood-list> <is-service-node> [ <client-nfn> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

fl

Flood List

evi

Filter on E-VPN identifier (VLAN-ID or BD-ID)

vpn-id

E-VPN identifier (VLAN-ID or BD-ID)

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_fl

(Optional) L2RIB Flood List Table

peer-id

(Optional) Peer-ID

flood-list

(Optional) Flood List

is-service-node

(Optional) Is Service Node

client-nfn

(Optional) Client Notification Bitmap

Command Mode

  • /exec

show l2route evpn imet all

show l2route evpn imet all [ detail ] [ __readonly__ TABLE_l2route_imet_all <topo-id> <vni> <prod-type> <ip-addr> [ <eth-tag-id> ] [ <pmsi-flags> ] [ <flags> ] [ <type> ] [ <vni-label> ] [ <tunnel-id> ] [ <client-nfn> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

imet

IMET Route

all

Display all routes without filtering

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_imet_all

(Optional) L2RIB IMET All Table

topo-id

(Optional) Topology ID

vni

(Optional) VNI

prod-type

(Optional) Producer Type

ip-addr

(Optional) IP Address

eth-tag-id

(Optional) Ethernet Tag ID

pmsi-flags

(Optional) PMSI Flags

flags

(Optional) Flags

type

(Optional) Type

vni-label

(Optional) VNI Label

tunnel-id

(Optional) Tunnel ID

client-nfn

(Optional) Client Notification Bitmap

Command Mode

  • /exec

show l2route evpn imet evi

show l2route evpn imet evi <vpn-id> [ bgp | vxlan ] [ detail ] [ __readonly__ TABLE_l2route_imet <vni> <prod-type> <ip-addr> [ <eth-tag-id> ] [ <pmsi-flags> ] [ <flags> ] [ <type> ] [ <vni-label> ] [ <tunnel-id> ] [ <client-nfn> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

imet

IMET Route

evi

Filter on E-VPN identifier (VLAN-ID or BD-ID)

vpn-id

E-VPN identifier (VLAN-ID or BD-ID)

bgp

(Optional) Filter on BGP producer (remote imet routes)

vxlan

(Optional) Filter on VXLAN producer (local imet routes)

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_imet

(Optional) L2RIB IMET Table

vni

(Optional) VNI

prod-type

(Optional) Producer Type

ip-addr

(Optional) IP Address

eth-tag-id

(Optional) Ethernet Tag ID

pmsi-flags

(Optional) PMSI Flags

flags

(Optional) Flags

type

(Optional) Type

vni-label

(Optional) VNI Label

tunnel-id

(Optional) Tunnel ID

client-nfn

(Optional) Client Notification Bitmap

Command Mode

  • /exec

show l2route evpn mac-ip all

show l2route evpn mac-ip all [ detail ] [ __readonly__ TABLE_l2route_mac_ip_all <topo-id> <mac-addr> <prod-type> <flags> <seq-num> <host-ip> <next-hop1> [ <next-hop2> ] [ <l3-info> ] [ <fwd-state> ] [ <rte-res> ] [ <sent-to> ] [ <peerid> ] [ <peer-ifindex> ] [ <esi-id> ] [ <soo> ] [ <pcinfo> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

mac-ip

MAC-IP Route

all

Display all routes without filtering

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_mac_ip_all

(Optional) L2RIB Mac-IP All Table

topo-id

(Optional) Topology ID

mac-addr

(Optional) Mac Address

prod-type

(Optional) Producer Type

flags

(Optional) Flags

seq-num

(Optional) Sequence Number

host-ip

(Optional) Host IP

next-hop1

(Optional) Next Hop 1

next-hop2

(Optional) Next Hop 2

l3-info

(Optional) L3 Information

fwd-state

(Optional) Forwarding State

rte-res

(Optional) Route Resolution

sent-to

(Optional) Active Clients

peerid

(Optional) Peer ID

peer-ifindex

(Optional) Peer Interface Index

esi-id

(Optional) ESI ID

soo

(Optional) SOO

pcinfo

(Optional) Port-Channel Info

Command Mode

  • /exec

show l2route evpn mac-ip evi

show l2route evpn mac-ip evi <vpn-id> [ arp | bgp | hmm ] [ mac <mac_addr> ] [ host-ip { <ipv4_host> | <ipv6_host> } ] [ next-hop { <ipv4_addr> | <ipv6_addr> | <if-hdl> } ] [ detail ] [ __readonly__ TABLE_l2route_mac_ip_evi <topo-id> <mac-addr> <prod-type> <seq-num> <host-ip> <next-hop1> [ <next-hop2> ] [ <l3-info> ] [ <fwd-state> ] [ <rte-res> ] [ <sent-to> ] [ <peerid> ] [ <peer-ifindex> ] [ <esi-id> ] [ <soo> ] [ <pcinfo> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

mac-ip

MAC-IP Route

evi

Filter on E-VPN identifier (VLAN-ID or BD-ID)

vpn-id

E-VPN identifier (VLAN-ID or BD-ID)

arp

(Optional) Filter on ARP producer

bgp

(Optional) Filter on BGP producer

hmm

(Optional) Filter on HMM producer

mac

(Optional) Filter on MAC address

mac_addr

(Optional) 48-bit MAC address value

host-ip

(Optional) Filter on Host IP address

ipv4_host

(Optional) IPv4 address

next-hop

(Optional) Filter on Next-Hop IP or Interface Name

ipv4_addr

(Optional) IPv4 address of Next Hop

if-hdl

(Optional) Interface index of Next Hop

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_mac_ip_evi

(Optional) L2RIB Mac-IP Table

topo-id

(Optional) Topology ID

mac-addr

(Optional) Mac Address

prod-type

(Optional) Producer Type

host-ip

(Optional) Host IP

seq-num

(Optional) Sequence Number

next-hop1

(Optional) Next Hop 1

next-hop2

(Optional) Next Hop 2

fwd-state

(Optional) Forwarding State

rte-res

(Optional) Route Resolution

sent-to

(Optional) Active Clients

esi-id

(Optional) ESI ID

soo

(Optional) SOO

pcinfo

(Optional) Port-Channel Info

l3-info

(Optional) L3 Information

peerid

(Optional) Peer ID

peer-ifindex

(Optional) Peer Interface Index

Command Mode

  • /exec

show l2route evpn mac all

show l2route evpn mac all [ detail ] [ __readonly__ TABLE_l2route_mac_all <topo-id> <mac-addr> <prod-type> <flags> <seq-num> <next-hop1> [ <next-hop2> ] [ <rte-res> ] [ <fwd-state> ] [ <res-pl-next-hop1> ] [ <res-pl-next-hop2> ] [ <sent-to> ] [ <esi-id> ] [ <soo> ] [ <pcinfo> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

mac

MAC Route

all

Display all routes without filtering

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_mac_all

(Optional) L2RIB Mac All Table

topo-id

(Optional) Topology ID

mac-addr

(Optional) Mac Address

prod-type

(Optional) Producer Type

flags

(Optional) Flags

seq-num

(Optional) Sequence Number

fwd-state

(Optional) Forwarding State

res-pl-next-hop1

(Optional) Resultant PL Next hop 1

res-pl-next-hop2

(Optional) Resultant PL Next hop 2

rte-res

(Optional) Route Resolution

sent-to

(Optional) Active Clients

esi-id

(Optional) ESI ID

soo

(Optional) SOO

pcinfo

(Optional) Port-Channel Info

next-hop1

(Optional) Next Hop 1

next-hop2

(Optional) Next Hop 2

Command Mode

  • /exec

show l2route evpn mac evi

show l2route evpn mac evi <vpn-id> [ static | local | bgp | vxlan | lisp ] [ mac <mac_addr> ] [ next-hop { <ipv4_addr> | <ipv6_addr> | <if-hdl> } ] [ esi <esi-id> ] [ detail ] [ __readonly__ TABLE_l2route_mac_evi <topo-id> <mac-addr> <prod-type> <flags> <seq-num> <next-hop1> [ <next-hop2> ] [ <rte-res> ] [ <fwd-state> ] [ <res-pl-next-hop1> ] [ <res-pl-next-hop2> ] [ <sent-to> ] [ <esi-id> ] [ <soo> ] [ <pcinfo> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

mac

MAC Route

evi

Filter on E-VPN identifier (VLAN-ID or BD-ID)

vpn-id

E-VPN identifier (VLAN-ID or BD-ID)

static

(Optional) Filter on Static producer

local

(Optional) Filter on Local producer

bgp

(Optional) Filter on BGP producer

vxlan

(Optional) Filter on VXLAN producer

lisp

(Optional) Filter on LISP producer

mac

(Optional) Filter on MAC address

esi

(Optional) Filter on ESI value

mac_addr

(Optional) Enter 48-bit MAC address value

next-hop

(Optional) Filter on Next-Hop IP or Interface Name

ipv4_addr

(Optional) IPv4 address of Next Hop

if-hdl

(Optional) Interface index of Next Hop

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_mac_evi

(Optional) L2RIB Mac EVI Table

topo-id

(Optional) Topology ID

mac-addr

(Optional) Mac Address

prod-type

(Optional) Producer Type

flags

(Optional) Flags

seq-num

(Optional) Sequence Number

next-hop1

(Optional) Next Hop 1

next-hop2

(Optional) Next Hop 2

fwd-state

(Optional) Forwarding State

res-pl-next-hop1

(Optional) Resultant PL Next hop 1

res-pl-next-hop2

(Optional) Resultant PL Next hop 2

rte-res

(Optional) Route Resolution

sent-to

(Optional) Active Clients

esi-id

(Optional) ESI ID

soo

(Optional) SOO

pcinfo

(Optional) Port-Channel Info

Command Mode

  • /exec

show l2route evpn path-list all

show l2route evpn path-list { all | esi <esi-id> } [ detail ] [ __readonly__ TABLE_l2route_evpn_pathlist_all <topo-id> <prod> <esi> [ <ecmp_label> ] [ <flags> ] [ <client_ctx> ] <mac-cnt> <client-nfn> [ { <cp-next-hop> } ] [ { <res-next-hop> } ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

path-list

Path-List

all

Display all routes without filtering

esi

ESI Value

esi-id

ESI ID

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_evpn_pathlist_all

(Optional) L2RIB EVPN Pathlist all Table

topo-id

(Optional) Topology ID

prod

(Optional) Producer

esi

(Optional) ESI

ecmp_label

(Optional) ECMP label

flags

(Optional) Flags

client_ctx

(Optional) Client context

mac-cnt

(Optional) Mac count

client-nfn

(Optional) Client Notification Bitmap

cp-next-hop

(Optional) Control plane Next hops

res-next-hop

(Optional) Resultant Next hops

Command Mode

  • /exec

show l2route evpn startup-route all

show l2route evpn startup-route all [ detail ] [ __readonly__ TABLE_l2route_startup_route_all <topo-id> <src-group> <del-src-group> [ <src-lpbk-ifhdl> ] [ <nve-ifhdl> ] [ <flags> ] [ <client-nfn> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

startup-route

Startup Route

all

Display all routes without filtering

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_startup_route_all

(Optional) L2RIB Startup-Route All Table

topo-id

(Optional) Topology ID

src-group

(Optional) Source Group

del-src-group

(Optional) Delivery Source Group

src-lpbk-ifhdl

(Optional) Source Loopback Interface Handle

nve-ifhdl

(Optional) NVE Interface Handle

flags

(Optional) Flags

client-nfn

(Optional) Client Notification Bitmap

Command Mode

  • /exec

show l2route evpn startup-route evi

show l2route evpn startup-route evi <vpn-id> [ detail ] [ __readonly__ TABLE_l2route_startup_route <src-group> <del-src-group> [ <src-lpbk-ifhdl> ] [ <nve-ifhdl> ] [ <flags> ] [ <client-nfn> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

evpn

EVPN

startup-route

Startup Route

evi

Filter on E-VPN identifier (VLAN-ID or BD-ID)

vpn-id

E-VPN identifier (VLAN-ID or BD-ID)

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_startup_route

(Optional) L2RIB Startup-Route Table

src-group

(Optional) Source Group

del-src-group

(Optional) Delivery Source Group

src-lpbk-ifhdl

(Optional) Source Loopback Interface Handle

nve-ifhdl

(Optional) NVE Interface Handle

flags

(Optional) Flags

client-nfn

(Optional) Client Notification Bitmap

Command Mode

  • /exec

show l2route fl topology

show l2route fl { topology <topo-id> | all } [ detail ] [ __readonly__ TABLE_l2route_fl [ <topo-id> ] <peer-id> <flood-list> <is-service-node> [ <client-nfn> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

fl

Flood List

all

Display all routes without filtering

topology

Filter on toplogy ID

topo-id

topology ID

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_fl

(Optional) L2RIB Flood List Table

topo-id

(Optional) Topology ID

peer-id

(Optional) Peer-ID

flood-list

(Optional) Flood List

is-service-node

(Optional) Is Service Node

client-nfn

(Optional) Client Notification Bitmap

Command Mode

  • /exec

show l2route peerid

show l2route peerid [ __readonly__ TABLE_l2route_peerid <if-hdl> <ip-addr> <peer-id> <if-idx> <num-macs> <num-nhs> ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

peerid

Display Peer ID DB

__readonly__

(Optional)

TABLE_l2route_peerid

(Optional) L2RIB Peer-ID Table

if-hdl

(Optional) Interface Handle

ip-addr

(Optional) IP Address

if-idx

(Optional) Peer Interface Index

peer-id

(Optional) Peer-ID

num-macs

(Optional) Number of Macs

num-nhs

(Optional) Number of NHs

Command Mode

  • /exec

show l2route summary

show l2route summary [ __readonly__ { <total_memory> <numof_converged_tables> [ { TABLE_l2route_summary <table_name> { TABLE_producer <producer_name> <id> <objects> <memory> } <total><total_obj><total_mem> } ] } ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

summary

Summary

__readonly__

(Optional) Read only

total_memory

(Optional) Total memory

numof_converged_tables

(Optional) Number of converged tables

TABLE_l2route_summary

(Optional) L2route summary table

table_name

(Optional) Table name

TABLE_producer

(Optional) Producer table

producer_name

(Optional) Producer name

id

(Optional) id

objects

(Optional) objects

memory

(Optional) Memory

Command Mode

  • /exec

show l2route topology

show l2route topology [ <topo_id> ] [ detail ] [ __readonly__ TABLE_l2route_topology <topo-id> <topo-name> <topo-type> [ <vni> ] [ <encap-type> ] [ <iod> ] [ <if-hdl> ] [ <vtep-ip> ] [ <emulated-ip> ] [ <emulated-ro-ip> ] [ <tx-id> ] [ <rcvd-flag> ] [ <rmac> ] [ <vrf-id> ] [ <vmac> ] [ <vmac-ro> ] [ <flags> ] [ <sub-flags> ] [ <prev-flags> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

topology

Display topology IDs

topo_id

(Optional) Enter Topology ID

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_topology

(Optional) L2RIB Topology Table

topo-id

(Optional) Topology ID

topo-name

(Optional) Topology Name

topo-type

(Optional) Topology Type

vni

(Optional) VNI

encap-type

(Optional) Encap Type

iod

(Optional) IOD

if-hdl

(Optional) Interface Handle

vtep-ip

(Optional) VTEP IP Address

emulated-ip

(Optional) Emulated VTEP IP Address

emulated-ro-ip

(Optional) Emulated RO VTEP IP Address

tx-id

(Optional) Transaction ID for Topology Ack

rcvd-flag

(Optional) Flag to Indicate Topology Ack

rmac

(Optional) Local Router MAC (For L3 VNIs)

vrf-id

(Optional) VRF ID (For L3 VNIs)

vmac

(Optional) Local Virtual MAC (For L3 VNIs)

vmac-ro

(Optional) Local Virtual MAC Re-Orig(For Multi-site)

flags

(Optional) Flags

sub-flags

(Optional) Sub Flags

prev-flags

(Optional) Previous Flags

Command Mode

  • /exec

show l2route topology

show l2route { mac | openflow mac | dataplane mac [ local | remote ] } { topology <topo-id> | all } [ detail ] [ __readonly__ TABLE_l2route_mac <topo-id> <mac-addr> <prod-type> <flags> <seq-num> <next-hop1> [ <next-hop2> ] [ <rte-res> ] [ <fwd-state> ] [ <res-pl-next-hop1> ] [ <res-pl-next-hop2> ] [ <sent-to> ] [ <esi-id> ] [ <soo> ] [ <pcinfo> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

dataplane

dataplane

openflow

openflow

mac

MAC Route

all

Display all routes without filtering

local

(Optional) dataplane learnt local routes

remote

(Optional) dataplane learnt remote routes

topology

Filter on toplogy ID

topo-id

topology ID

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_mac

(Optional) L2RIB Mac All Table

topo-id

(Optional) Topology ID

mac-addr

(Optional) Mac Address

prod-type

(Optional) Producer Type

flags

(Optional) Flags

seq-num

(Optional) Sequence Number

next-hop1

(Optional) Next Hop 1

next-hop2

(Optional) Next Hop 2

fwd-state

(Optional) Forwarding State

res-pl-next-hop1

(Optional) Resultant PL Next hop1

res-pl-next-hop2

(Optional) Resultant PL Next hop2

rte-res

(Optional) Route Resolution

sent-to

(Optional) Active Clients

esi-id

(Optional) ESI ID

soo

(Optional) SOO

pcinfo

(Optional) Port-Channel Info

Command Mode

  • /exec

show l2route topology

show l2route { mac-ip | openflow mac-ip } { topology <topo-id> | all } [ detail ] [ __readonly__ TABLE_l2route_mac_ip_openflow <topo-id> <mac-addr> <prod-type> <seq-num> <host-ip> <next-hop1> [ <next-hop2> ] [ <l3-info> ] [ <fwd-state> ] [ <rte-res> ] [ <sent-to> ] [ <peerid> ] [ <peer-ifindex> ] [ <esi-id> ] [ <soo> ] [ <pcinfo> ] ]

Syntax Description

show

Show running system information

l2route

Layer 2 routing information base

mac-ip

MAC-IP Route

all

Display all routes without filtering

openflow

openflow

topology

Filter on toplogy ID

topo-id

topology ID

detail

(Optional) Detailed information

__readonly__

(Optional)

TABLE_l2route_mac_ip_openflow

(Optional) L2RIB Mac-IP Table

topo-id

(Optional) Topology ID

mac-addr

(Optional) Mac Address

prod-type

(Optional) Producer Type

host-ip

(Optional) Host IP

next-hop1

(Optional) Next Hop 1

next-hop2

(Optional) Next Hop 2

seq-num

(Optional) Sequence Number

fwd-state

(Optional) Forwarding State

rte-res

(Optional) Route Resolution

sent-to

(Optional) Active Clients

esi-id

(Optional) ESI ID

soo

(Optional) SOO

pcinfo

(Optional) Port-Channel Info

l3-info

(Optional) L3 Information

peerid

(Optional) Peer ID

peer-ifindex

(Optional) Peer Interface Index

Command Mode

  • /exec

show lacp counters

show lacp counters [ interface <if0> ] [ __readonly__ TABLE_interface <interface> TABLE_member <port> <pdus-sent> <pdus-rcvd> <marker-rcvd> <marker-resp-sent> <pkt-errors> [ <illegal-rcvd> ] [ <unknown-rcvd> ] ]

Syntax Description

show

Show running system information

lacp

LACP protocol

counters

LACP counters

interface

(Optional) Specify a port-channel

if0

(Optional)

__readonly__

(Optional)

TABLE_interface

(Optional) Port channel table

interface

(Optional) Port channel

TABLE_member

(Optional) Member port info

port

(Optional) Member port

pdus-sent

(Optional) Number of PDUs sent

pdus-rcvd

(Optional) Number of PDUs received

marker-rcvd

(Optional) Number of Marker PDUs received

marker-resp-sent

(Optional) Number of Marker response PDUs sent

pkt-errors

(Optional) Number of packet errors

illegal-rcvd

(Optional) Number of illegal packets received

unknown-rcvd

(Optional) Number of unknown packets received

Command Mode

  • /exec

show lacp interface

show lacp interface [ <if0> ] [ __readonly__ { TABLE_lacp_intf <interface> <operational-state> <channel-group> <port-channel> <pdus-sent> <pdus-rcvd> <marker-sent> <marker-rcvd> <marker-resp-sent> <marker-resp-rcvd> <unknown-rcvd> <illegal-rcvd> <lag-id> <active-time> { localport <local-interface> <local-mac-address> <local-system-priority> <local-port-priority> <local-port-num> <local-op-key> <local-activity> <local-timeout> <local-sync> <local-collecting> <local-distributing> <partner-info-timeout> <local-admin-state> <local-oper-state> } { partnerport <partner-interface> <partner-mac-address> <partner-system-priority> <partner-port-priority> <partner-port-num> <partner-op-key> <partner-activity> <partner-timeout> <partner-sync> <partner-collecting> <partner-distributing> <partner-admin-state> <partner-oper-state> } <agg-or-indiv> } ]

Syntax Description

show

Show running system information

lacp

LACP protocol

interface

Specify a interface

if0

(Optional)

__readonly__

(Optional)

TABLE_lacp_intf

(Optional) Table of LACP interfaces

interface

(Optional) Interface ID

channel-group

(Optional) Channel Group

port-channel

(Optional) Port Channel

lag-id

(Optional) LAG Id

active-time

(Optional) active-time

operational-state

(Optional) Operational State

agg-or-indiv

(Optional) Aggregate or individual port

pdus-rcvd

(Optional) PDUs received

pdus-sent

(Optional) PDUs sent

marker-rcvd

(Optional) Markers received

marker-sent

(Optional) Markers sent

marker-resp-rcvd

(Optional) Marker response received

marker-resp-sent

(Optional) Marker response sent

unknown-rcvd

(Optional) Unknown pdus received

illegal-rcvd

(Optional) Illegal pdus received

localport

(Optional) Local port information

local-interface

(Optional) Interface

local-mac-address

(Optional) MAC Address

local-system-priority

(Optional) System Priority

local-port-priority

(Optional) Port Priority

local-port-num

(Optional) Port Number

local-op-key

(Optional) Operational Key

local-admin-state

(Optional) Local Admin State

local-oper-state

(Optional) Local Oper State

local-activity

(Optional) Mode

local-timeout

(Optional) Timeout

local-sync

(Optional) Synchronization

local-distributing

(Optional) Distributing

local-collecting

(Optional) Collecting

partner-info-timeout

(Optional) Partner information refresh timeout

partnerport

(Optional) Partner port information

partner-interface

(Optional) Partner Interface

partner-mac-address

(Optional) Partner MAC Address

partner-system-priority

(Optional) Partner System Priority

partner-port-priority

(Optional) Partner Port Priority

partner-port-num

(Optional) Partner Port Number

partner-op-key

(Optional) Operational Key

partner-admin-state

(Optional) Partner Admin State

partner-oper-state

(Optional) Partner Oper State

partner-activity

(Optional) Mode

partner-timeout

(Optional) Timeout

partner-sync

(Optional) Synchronization

partner-distributing

(Optional) Distributing

partner-collecting

(Optional) Collecting

Command Mode

  • /exec

show lacp issu-impact

show lacp issu-impact [ __readonly__ TABLE_interface <interface> [ <failed_interface> ] [ <intf_issu_ready> ] ]

Syntax Description

show

Show running system information

lacp

Show LACP information

issu-impact

Check for ISSU readiness

__readonly__

(Optional)

TABLE_interface

(Optional) Port-channel issu-impact member list

interface

(Optional) Port-channel Member

failed_interface

(Optional) ISSU failed interface

intf_issu_ready

(Optional) interfaces ready for issu

Command Mode

  • /exec

show lacp neighbor

show lacp neighbor [ interface <if0> ] [ __readonly__ TABLE_interface <interface> TABLE_member <port> <partner-system-id> <partner-port-num> <partner-age> <partner-flags> <partner-port-priority> <partner-oper-key> <partner-port-state> ]

Syntax Description

show

Show running system information

lacp

LACP protocol

neighbor

LACP interface neighbor

interface

(Optional) Specify a port-channel

if0

(Optional)

__readonly__

(Optional)

TABLE_interface

(Optional) Port channel table

interface

(Optional) Port channel

TABLE_member

(Optional) Member port info

port

(Optional) Member port

partner-system-id

(Optional) Partner System ID

partner-port-num

(Optional) Partner Port Number

partner-age

(Optional) Partner age

partner-flags

(Optional) Partner flags

partner-port-priority

(Optional) Partner Port Priority

partner-oper-key

(Optional) Partner oper key

partner-port-state

(Optional) Partner port state

Command Mode

  • /exec

show lacp port-channel

show lacp port-channel [ interface <if0> ] [ __readonly__ TABLE_interface <interface> <aggr-mac-address> <local-system-priority> <local-system-id> <local-admin-key> <local-oper-key> <partner-system-priority> <partner-system-id> <partner-oper-key> <max-delay> <agg-or-indiv> { <port-list> } + ]

Syntax Description

show

Show running system information

lacp

LACP protocol

port-channel

LACP port-channels

interface

(Optional) Specify a port-channel

if0

(Optional)

__readonly__

(Optional)

TABLE_interface

(Optional) Port channel table

interface

(Optional) Port channel

aggr-mac-address

(Optional) Mac Address of aggregator

local-system-priority

(Optional) Local System Priority

local-system-id

(Optional) Local System-Id

local-admin-key

(Optional) Local admin key

local-oper-key

(Optional) Local oper key

partner-system-priority

(Optional) Partner System Priority

partner-system-id

(Optional) Partner System-Id

partner-oper-key

(Optional) Partner oper key

max-delay

(Optional) Maximum delay between aggregator and mac-client

agg-or-indiv

(Optional) Aggregate or individual port

port-list

(Optional) List of port names for member ports

Command Mode

  • /exec

show lacp system-identifier

show lacp system-identifier [ __readonly__ <system-priority> <system-mac> ]

Syntax Description

show

Show running system information

lacp

LACP protocol

system-identifier

Show system-identifier information

__readonly__

(Optional)

system-priority

(Optional) System priority

system-mac

(Optional) System mac address

Command Mode

  • /exec

show ldap-search-map

show ldap-search-map [ __readonly__ { number_of_search_maps <search_map_count> } [ TABLE_ldap_searchmaps [ <map_name> <map_baseDN> <map_attr> <map_filter> ] ] ]

Syntax Description

__readonly__

(Optional)

number_of_search_maps

(Optional) Total number of search maps configured

search_map_count

(Optional) Ldap Search map count

TABLE_ldap_searchmaps

(Optional) Ldap search map configuration

map_name

(Optional) Search map name

map_baseDN

(Optional) Ldap base DN

map_attr

(Optional) Search map attribute

map_filter

(Optional) Ldap Search filter

show

Show running system information

ldap-search-map

Show LDAP configuration information

Command Mode

  • /exec

show ldap-server

show ldap-server [ __readonly__ { global_timeout <g_timeout> } { global_port <g_port> } { global_deadtime <g_deadtime> } { total_number_of_server <g_servers_count> } { TABLE_ldap_hosts <ldap_host> <h_idletime> <h_test_user> <h_test_passwd> [ <h_test_dn> ] <h_timeout> <h_port> <h_rootDN> <h_ssl_enable> } ]

Syntax Description

__readonly__

(Optional)

TABLE_ldap_hosts

(Optional) Ldap host configuration

global_timeout

(Optional) Ldap host global timeout

global_port

(Optional) Ldap host global port

global_deadtime

(Optional) Ldap host global deadtime

total_number_of_server

(Optional) Total number of ldap hosts configured

g_servers_count

(Optional) Total number of ldap hosts configured

g_timeout

(Optional) global timeout value

g_port

(Optional) Global ldap port

g_deadtime

(Optional) Global deadtime value

ldap_host

(Optional) Ldap host

h_idletime

(Optional) Ldap host idletime

h_test_user

(Optional) Ldap host testuser

h_test_passwd

(Optional) Ldap host password

h_test_dn

(Optional) Ldap testuser dn

h_timeout

(Optional) Ldap host timeout

h_port

(Optional) Ldap host port

h_rootDN

(Optional) Ldap host RootDN

h_ssl_enable

(Optional) Ldap host ssl configuration

show

Show running system information

ldap-server

Show LDAP configuration information

Command Mode

  • /exec

show ldap-server groups

show ldap-server groups [ __readonly__ { total_number_of_groups <total_groups_count> } { TABLE_groups <g_name> <g_vrf> <g_mode> <is_bind_and_search> <g_append_with_baseDN> <g_compare_or_bind> <g_cmp_passwd_attr> [ <user-server-group> ] [ <Cert-DN-match> ] <auth_mechanism> [ TABLE_g_servers <g_server> <g_port> <g_timeout> ] [ <g_search_map> ] } ]

Syntax Description

show

Show running system information

ldap-server

Show LDAP configuration information

groups

Show LDAP server group configuration information

__readonly__

(Optional)

total_number_of_groups

(Optional) Total number of Ldap groups configured

total_groups_count

(Optional) Ldap group count

TABLE_groups

(Optional) LDAP Group information

g_name

(Optional) Ldap group name

g_vrf

(Optional) LDAP group vrf

g_mode

(Optional) LDAP group mode

is_bind_and_search

(Optional) Ldap Authentication bind or search

g_append_with_baseDN

(Optional) LDAP baseDN append information

g_compare_or_bind

(Optional) LDAP bind or compare

g_cmp_passwd_attr

(Optional) LDAP compare password attribute

user-server-group

(Optional) Ldap server group validation

Cert-DN-match

(Optional) Ldap group CERT-DN match

auth_mechanism

(Optional) Ldap server group authentication mechanism

TABLE_g_servers

(Optional) LDAP group server information

g_server

(Optional) LDAP group host

g_port

(Optional) LDAP group host port

g_timeout

(Optional) LDAP griup host timeout

g_search_map

(Optional) LDAP group search map

Command Mode

  • /exec

show ldap-server statistics

show ldap-server statistics <host0> [ __readonly__ { <server_state> [ <clock_time> { monitoring_statistics <time_in_pstate> <ndead> <tt_in_dstate> } ] } { { auth_statistics <auth_failed_transactions> <auth_succ_transactions> <auth_req_sent> <auth_req_timedout> <auth_resp_no_match> <auth_resp_not_processed> <auth_resp_error> } [ acct_statistics <acct_failed_transactions> <acct_succ_transactions> <acct_req_sent> <acct_req_timedout> <acct_resp_no_match> <acct_resp_not_processed> <acct_resp_error> ] } ]

Syntax Description

show

Show running system information

ldap-server

Show LDAP configuration information

statistics

Show LDAP statistics

host0

DNS name or IP address

__readonly__

(Optional)

server_state

(Optional) Show state of server

clock_time

(Optional) Show clock time in terms of hours, minutes and seconds

monitoring_statistics

(Optional) Monitoring Statistics

time_in_pstate

(Optional) Time in previous state

ndead

(Optional) Number of times dead

tt_in_dstate

(Optional) Total time in dead state

auth_statistics

(Optional) Authentication Statistics

acct_statistics

(Optional) Accounting Statistics

auth_failed_transactions

(Optional) Authentication: Failed transactions

auth_succ_transactions

(Optional) Authentication: Successful transactions

auth_req_sent

(Optional) Authentication: Requests sent

auth_req_timedout

(Optional) Authentication: Requests timedout

auth_resp_no_match

(Optional) Authentication: Responses with no matching requests

auth_resp_not_processed

(Optional) Authentication: Responses not processed

auth_resp_error

(Optional) Authentication: Responses containing errors

acct_failed_transactions

(Optional) Accounting: Failed transactions

acct_succ_transactions

(Optional) Accounting: Successful transactions

acct_req_sent

(Optional) Accounting: Requests sent

acct_req_timedout

(Optional) Accounting: Requests timedout

acct_resp_no_match

(Optional) Accounting: Responses with no matching requests

acct_resp_not_processed

(Optional) Accounting: Responses not processed

acct_resp_error

(Optional) Accounting: Responses containing errors

Command Mode

  • /exec

show license

show license [ __readonly__ { [ <lic_file_name> <lic_file_contents> ] + } ]

Syntax Description

show

Show running system information

license

show the contents of all the license files

__readonly__

(Optional) Read only

lic_file_name

(Optional) Name of the license file

lic_file_contents

(Optional) License file contents

Command Mode

  • /exec

show license brief

show license brief [ __readonly__ { [ <lic_file_name> ] + } ]

Syntax Description

show

Show running system information

license

show the contents of all the license files

brief

Show a list of license files

__readonly__

(Optional) Read only

lic_file_name

(Optional) Name of the license file

Command Mode

  • /exec

show license default

show license default [ __readonly__ { TABLE_lic_default <feature_name> <def_lic_count> } ]

Syntax Description

show

Show running system information

license

show the contents of all the license files

default

Show services using default license

__readonly__

(Optional) Read Only

feature_name

(Optional) Licensed Feature Name

TABLE_lic_default

(Optional)

def_lic_count

(Optional) Default License Count

Command Mode

  • /exec

show license feature package mapping

show license feature package mapping [ __readonly__ { [ <app_name> [ <lc_type> <flags> <pkg_name> <version> ] + ] + | [ <null_map> ] } ]

Syntax Description

show

Show running system information

license

show the contents of all the license files

feature

Show application name

package

Show license package name

mapping

Show mapping between application and package name

__readonly__

(Optional) Read only

app_name

(Optional) Name of the application

lc_type

(Optional) Lincard type

flags

(Optional) Are all licenses required

pkg_name

(Optional) License Package Name

version

(Optional) License version

null_map

(Optional) No mappings defined

Command Mode

  • /exec

show license file

show license file <license-file> [ __readonly__ { [ <lic_file_contents> ] + } ]

Syntax Description

show

Show running system information

license

Show the contents of all the license files

file

Show contents of a license file

license-file

Show the contents of license file __nil__ Please install a license before using this command.

__readonly__

(Optional) Read only

lic_file_contents

(Optional) License file contents

Command Mode

  • /exec

show license host-id

show license host-id [ __readonly__ { <host_id> } ]

Syntax Description

show

Show running system information

license

show the contents of all the license files

host-id

Show unique id for this host for licensing

__readonly__

(Optional) Read only

host_id

(Optional) unique id for this host for licensing

Command Mode

  • /exec

show license reserved

show license reserved

Syntax Description

show

show commands

license

Display licensing information

reserved

Display reserved licenses information

Command Mode

  • /exec

show license tech support

show license tech support

Syntax Description

show

show commands

license

Display licensing information

tech

Gather information for troubleshooting

support

Gather information for troubleshooting

Command Mode

  • /exec

show license usage

show license usage [ { detail | <license-feature> } ] [ __readonly__ { [ [ TABLE_show_lic_usage { <feature_name> <lic_installed> <count> <status> <expiry_date> <comments> } ] { [ <application_name> ] + } ] | [ <auth_status> [ TABLE_show_smart_lic_usage { <smart_feature_name> <smart_description> <smart_count> <smart_version> <smart_status> } ] ] } ]

Syntax Description

show

Show running system information

license

show the contents of all the license files

usage

Show license usage table

detail

(Optional) Show license usage table

license-feature

(Optional) Show usage of this license package

__readonly__

(Optional) Read only

TABLE_show_lic_usage

(Optional) License usage

feature_name

(Optional) Name of the feature

lic_installed

(Optional) Is the license installed?

count

(Optional) License count

status

(Optional) License status

expiry_date

(Optional) Expiry date of the license

comments

(Optional) License comments

application_name

(Optional) Name of the application using the license

auth_status

(Optional) Brief about smart license usage

TABLE_show_smart_lic_usage

(Optional) Smart License usage

smart_feature_name

(Optional) Name of the feature

smart_description

(Optional) Description of the entitlement

smart_count

(Optional) License count

smart_version

(Optional) License version

smart_status

(Optional) License status

Command Mode

  • /exec

show line

show line [ __readonly__ <speed> <databits> <stopbits> <parity> <modem_in> <modem_init_str> <stat> [ TABLE_ps_output <ps> ] [ <speed_aux> <databits_aux> <stopbits_aux> <parity_aux> <modem_in_aux> <modem_init_str_aux> <hw_fc_aux> <stat_aux> [ TABLE_ps_output_aux <ps_aux> ] ] ]

Syntax Description

show

Show running system information

line

Show the line configuration

__readonly__

(Optional)

TABLE_ps_output

(Optional) Process info for console login

TABLE_ps_output_aux

(Optional) Process info for com1 login

speed

(Optional) Port speed(baud)

databits

(Optional) Bits per byte

stopbits

(Optional) Bits

parity

(Optional) Parity

modem_in

(Optional) Modem In

modem_init_str

(Optional) Modem Init-String

stat

(Optional) Statistics

ps

(Optional) Login process

speed_aux

(Optional) Port speed(baud)

databits_aux

(Optional) Bits per byte

stopbits_aux

(Optional) Bits

parity_aux

(Optional) Parity

modem_in_aux

(Optional) Modem In

modem_init_str_aux

(Optional) Modem Init-String

hw_fc_aux

(Optional) Hardware Flowcontrol

stat_aux

(Optional) Statistics

ps_aux

(Optional) Login process

Command Mode

  • /exec

show line console

show line console [ __readonly__ <speed> <databits> <stopbits> <parity> <modem_in> <modem_init_str> <stat> [ TABLE_ps_output <ps> ] ]

Syntax Description

show

Show running system information

line

Show the line configuration

console

Show console line configurations

__readonly__

(Optional)

TABLE_ps_output

(Optional) Process info for console login

speed

(Optional) Port speed(baud)

databits

(Optional) Bits per byte

stopbits

(Optional) Bits

parity

(Optional) Parity

modem_in

(Optional) Modem In

modem_init_str

(Optional) Modem Init-String

stat

(Optional) Statistics

ps

(Optional) Login process

Command Mode

  • /exec

show line console connected

show line console connected [ __readonly__ <output> ]

Syntax Description

show

Show running system information

line

Show the line configuration

console

Show console line configurations

connected

Show whether the line is currently connected physically

__readonly__

(Optional)

output

(Optional) output string

Command Mode

  • /exec

show line console user-input-string

show line console user-input-string [ __readonly__ <input> ]

Syntax Description

show

Show running system information

line

Show the line configuration

console

Show console line configurations

user-input-string

Show user-input init string

__readonly__

(Optional)

input

(Optional) user input string

Command Mode

  • /exec

show lisp ddt

show lisp ddt [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

show

Show running system information

lisp

LISP show commands

ddt

LISP Delegated Database Tree (LISP-DDT)

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

  • /exec

show lisp ddt queue

show lisp ddt queue [ [ instance-id <iid> ] { <eid> | <eid6> } ] [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

show

Show running system information

lisp

LISP show commands

ddt

LISP Delegated Database Tree (LISP-DDT)

queue

Display LISP-DDT Map-Request queue in Map-Resolver

instance-id

(Optional) Show instance-ID summary display

iid

(Optional) Instance-ID for EID-prefix

eid

(Optional) IPv4 EID address

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

  • /exec

show lisp ddt referral-cache

{ show lisp ddt referral-cache [ [ instance-id <iid> ] { <eid> | <eid6> } ] [ vrf { <vrf-name> | <vrf-known-name> } ] } | { show lisp ddt referral-cache { ms-ack | ms-referral | node-referral | ms-not-registered | delegation-hole | not-authoritative } [ vrf { <vrf-name> | <vrf-known-name> } ] }

Syntax Description

show

Show running system information

lisp

LISP show commands

ddt

LISP Delegated Database Tree (LISP-DDT)

referral-cache

Display LISP-DDT referral cache

instance-id

(Optional) Show instance-ID summary display

iid

(Optional) Instance-ID for EID-prefix

eid

(Optional) IPv4 EID address

ms-ack

Referral cache entries to map-servers

ms-referral

Referral cache entries from parent of map-servers

node-referral

Referral cache entries from parent of DDT-nodes

ms-not-registered

Referral cache entries from map-servers

delegation-hole

Referral cache entries from any DDT-node

not-authoritative

Referral cache entries from any DDT-node

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

  • /exec

show lisp dynamic-eid

{ show lisp dynamic-eid { summary | { [ <dyn-eid-name> ] [ detail ] } } [ vrf { <vrf-name> | <vrf-known-name> } ] }

Syntax Description

show

Show running system information

lisp

LISP show commands

dynamic-eid

Display dynamic-EIDs configured and discovered

summary

One-line summary display of discovered dynamic-EIDs

dyn-eid-name

(Optional) Display a single dynamic-EID

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

detail

(Optional) Display discovered dynamic-EIDs

Command Mode

  • /exec

show lisp elp

show lisp elp [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

show

Show running system information

lisp

LISP show commands

elp

Display LISP Explicit Locator Paths configured

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

  • /exec

show lisp negative-prefix

show lisp negative-prefix { <eid> | <eid6> } [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

show

Show running system information

lisp

LISP show commands

negative-prefix

Compute negative-prefix for hole in EID space

eid

IPv4 EID address

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

  • /exec

show lisp proxy-itr

show lisp proxy-itr [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

show

Show running system information

lisp

LISP show commands

proxy-itr

Display discovered proyx-ITRs (PITRs)

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

  • /exec

show lisp site

{ show lisp site [ { { <eid> | <eid6> } [ instance-id <iid> ] } | { { <eid-prefix> | <eid-prefix6> } [ instance-id <iid> ] } | <site-name> ] [ detail ] [ vrf { <vrf-name> | <vrf-known-name> } ] }

Syntax Description

show

Show running system information

lisp

LISP show commands

site

Display Map-Server site EID-prefixes configured

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

eid

(Optional) Display mapping for IP destination EID

eid-prefix

(Optional) Display exact match for IP EID-prefix entry

instance-id

(Optional) Instance EID-prefix registered in

iid

(Optional) Instance-ID value

site-name

(Optional) Display a single site

detail

(Optional) Display allowed registered locator sources

Command Mode

  • /exec

show lisp site instance-id

{ show lisp site instance-id [ <iid> ] [ vrf { <vrf-name> | <vrf-known-name> } ] }

Syntax Description

show

Show running system information

lisp

LISP show commands

site

Display Map-Server site EID-prefixes configured

instance-id

Show instance-ID summary display

iid

(Optional) Show detail for entries of a single Instance-ID

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

  • /exec

show lisp smr

show lisp smr [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

show

Show running system information

lisp

LISP show commands

smr

Display SMR state for dynamic-EIDs

vrf

(Optional) Display information for vrf

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

  • /exec

show lisp stats-cache

show lisp stats-cache [ vrf { <vrf-name> | <vrf-known-name> } ]

Syntax Description

show

Show running system information

lisp

LISP show commands

stats-cache

Show dynamic statistics cache

vrf

(Optional) Display per-VRF information

vrf-name

(Optional) VRF name

vrf-known-name

(Optional) Known VRF name

Command Mode

  • /exec

show lldp all

show lldp all [ __readonly__ TABLE_lldp_all <intf_desc> <lldp_tx> <lldp_rx> <lldp_dcbx> ]

Syntax Description

show

Show running system information

lldp

Show lldp Protocol information

all

Show all interfaces in lldp database

__readonly__

(Optional) Read only

TABLE_lldp_all

(Optional) output of show lldp all

intf_desc

(Optional) Interface desc

lldp_tx

(Optional) lldp tx status

lldp_rx

(Optional) lldp rx status

lldp_dcbx

(Optional) lldp dcbx status

Command Mode

  • /exec

show lldp dcbx interface

show lldp dcbx interface <if_in> [ __readonly__ <if_out> <cfg_proto> <det_proto> [ <l_op_ver> <l_max_ver> <l_seq_no> <l_ack_no> ] [ <l_feature> <l_feat_len> <l_cfg> ] + [ <p_op_ver> <p_max_ver> <p_seq_no> <p_ack_no> ] [ <p_tlv_type> <p_tlv_ctrl> <p_tlv_len> <p_tlv_value> ] + ]

Syntax Description

show

Show running system information

lldp

Show information about lldp

dcbx

Show dcbx information

interface

Show lldp interface information

if_in

Enter interface

__readonly__

(Optional)

if_out

(Optional) Interface ID

cfg_proto

(Optional) Configured DCBX Protocol

det_proto

(Optional) DCBX Protocol detected

l_op_ver

(Optional) local dcbx control operation version

l_max_ver

(Optional) local dcbx control maximum version

l_seq_no

(Optional) local dcbx control seq no

l_ack_no

(Optional) local dcbx control ack no

l_feature

(Optional) local feature

l_feat_len

(Optional) Local Feature Length

l_cfg

(Optional) local feature config

p_op_ver

(Optional) peer dcbx control operation version

p_max_ver

(Optional) peer dcbx control maximum version

p_seq_no

(Optional) peer dcbx control seq no

p_ack_no

(Optional) peer dcbx control ack no

p_tlv_type

(Optional) peer TLV type field

p_tlv_ctrl

(Optional) peer TLV control info

p_tlv_len

(Optional) Peer TLV Length

p_tlv_value

(Optional) peer TLV value field

Command Mode

  • /exec

show lldp entry

show lldp entry [ <sys-name> ] [ __readonly__ { <neigh_hdr> } { TABLE_entry <chassis_type> <chassis_id> <port_type> <port_id> <l_port_id> <port_desc> <sys_name> <sys_desc> <ttl> <capability> <mgmt_addr_type> <mgmt_addr> <mgmt_addr_ipv6_type> <mgmt_addr_ipv6> <vlan_id> } { <neigh_count> } ]

Syntax Description

show

Show running system information

lldp

Show information about lldp

entry

Show lldp entry information

sys-name

(Optional) WORD Peer's System name

__readonly__

(Optional)

neigh_hdr

(Optional)

TABLE_entry

(Optional) Table Entry

chassis_type

(Optional) Chassis ID type

chassis_id

(Optional) Chassis ID

port_type

(Optional) Port ID type

port_id

(Optional) Port ID

l_port_id

(Optional) Port ID

port_desc

(Optional) Port description

sys_name

(Optional) System name

sys_desc

(Optional) System description

ttl

(Optional) Time to live

capability

(Optional) Capability

mgmt_addr_type

(Optional) Management Address type

mgmt_addr

(Optional) Management Address

mgmt_addr_ipv6_type

(Optional) IPV6 Management Address type

mgmt_addr_ipv6

(Optional) IPV6 Management Address

vlan_id

(Optional) Vlan ID

neigh_count

(Optional)

Command Mode

  • /exec

show lldp interface

show lldp interface <if0> [ __readonly__ <interface> <tx_en> <rx_en> <dcbx_en> <port_mac> [ <tlv_type> <tlv_len> [ <tlv_value> ] ] + [ <l_op_ver> <l_max_ver> <l_seq_no> <l_ack_no> [ <l_feature> <l_cfg_len> <l_cfg> ] + ] [ <p_op_ver> <p_max_ver> <p_seq_no> <p_ack_no> [ <p_tlv_type> <p_tlv_len> <p_tlv_value> ] + ] ]

Syntax Description

show

Show running system information

lldp

Show information about lldp

interface

Show lldp interface information

if0

Enter interface

__readonly__

(Optional)

interface

(Optional) Interface ID

tx_en

(Optional) tx enable

rx_en

(Optional) rx enable

dcbx_en

(Optional) dcbx enable

port_mac

(Optional) Port mac address

tlv_type

(Optional) TLV type field

tlv_len

(Optional) TLV len field

tlv_value

(Optional) TLV value field

l_op_ver

(Optional) local dcbx control operation version

l_max_ver

(Optional) local dcbx control maximum version

l_seq_no

(Optional) local dcbx control seq no

l_ack_no

(Optional) local dcbx control ack no

l_feature

(Optional) local feature

l_cfg_len

(Optional) local feature config length

l_cfg

(Optional) local feature config

p_op_ver

(Optional) peer dcbx control operation version

p_max_ver

(Optional) peer dcbx control maximum version

p_seq_no

(Optional) peer dcbx control seq no

p_ack_no

(Optional) peer dcbx control ack no

p_tlv_type

(Optional) peer TLV type field

p_tlv_len

(Optional) peer TLV len field

p_tlv_value

(Optional) peer TLV value field

Command Mode

  • /exec

show lldp neighbors

show lldp neighbors [ interface <if> ] [ __readonly__ { <neigh_hdr> } { TABLE_nbor <chassis_type> <chassis_id> <l_port_id> <hold_time> [ <capability> ] <system_capability> <enabled_capability> <port_type> <port_id> <mgmt_addr_type> <mgmt_addr> <mgmt_addr_ipv6_type> <mgmt_addr_ipv6> } { <neigh_count> } ]

Syntax Description

show

Show running system information

lldp

Show information about lldp

neighbors

Show lldp neighbor information

interface

(Optional) Show lldp neighbor information on an interface

if

(Optional) Enter interface

__readonly__

(Optional)

neigh_hdr

(Optional)

TABLE_nbor

(Optional) Neighbor Table

chassis_type

(Optional) Chassis ID type

chassis_id

(Optional) Chassis ID

l_port_id

(Optional) Local port ID

hold_time

(Optional) Hold time

capability

(Optional) Capability

system_capability

(Optional) System Capability

enabled_capability

(Optional) Enabled Capability

port_type

(Optional) Port ID type

port_id

(Optional) Port ID

mgmt_addr_type

(Optional) Management Address type

mgmt_addr

(Optional) Management Address

mgmt_addr_ipv6_type

(Optional) IPV6 Management Address type

mgmt_addr_ipv6

(Optional) IPV6 Management Address

neigh_count

(Optional)

Command Mode

  • /exec

show lldp neighbors detail

show lldp neighbors [ interface <if> ] detail [ __readonly__ { <neigh_hdr> } { TABLE_nbor_detail <chassis_type> <chassis_id> <port_type> <port_id> <l_port_id> <port_desc> <sys_name> <sys_desc> <ttl> [ <capability> ] <system_capability> <enabled_capability> <mgmt_addr_type> <mgmt_addr> <mgmt_addr_ipv6_type> <mgmt_addr_ipv6> <vlan_id> } { <neigh_count> } ]

Syntax Description

show

Show running system information

lldp

Show information about lldp

neighbors

Show lldp neighbor information

interface

(Optional) Show lldp neighbor information on an interface

if

(Optional) Enter interface

detail

Show lldp neighbor detail information

__readonly__

(Optional)

neigh_hdr

(Optional)

TABLE_nbor_detail

(Optional) Neighbor detail Table

chassis_type

(Optional) Chassis ID type

chassis_id

(Optional) Chassis ID

port_type

(Optional) Port ID type

port_id

(Optional) Port ID

l_port_id

(Optional) Port ID

port_desc

(Optional) Port description

sys_name

(Optional) System name

sys_desc

(Optional) System description

ttl

(Optional) Time to live

capability

(Optional) Capability

system_capability

(Optional) System Capability

enabled_capability

(Optional) Enabled Capability

mgmt_addr_type

(Optional) Management Address type

mgmt_addr

(Optional) Management Address

mgmt_addr_ipv6_type

(Optional) IPV6 Management Address type

mgmt_addr_ipv6

(Optional) IPV6 Management Address

vlan_id

(Optional) Vlan ID

neigh_count

(Optional)

Command Mode

  • /exec

show lldp neighbors system-detail

show lldp neighbors [ interface <if> ] system-detail [ __readonly__ { <neigh_hdr> } { TABLE_nbor_sys_detail <sys_type> <sys_name> <l_port_id> <chassis_type> <chassis_id> <port_type> <port_id> <ttl> <capability> <mgmt_addr_type> <mgmt_addr> } { <neigh_count> } ]

Syntax Description

show

Show running system information

lldp

Show information about lldp

neighbors

Show lldp neighbor information

interface

(Optional) Show lldp neighbor information on an interface

if

(Optional) Enter interface

system-detail

Show lldp neighbor system detail information

__readonly__

(Optional)

neigh_hdr

(Optional)

TABLE_nbor_sys_detail

(Optional) Neighbor sys-detail Table

sys_type

(Optional) System Type

sys_name

(Optional) System Name

l_port_id

(Optional) Local port ID

chassis_type

(Optional) Chassis ID type

chassis_id

(Optional) Chassis ID

port_type

(Optional) Port ID type

port_id

(Optional) Port ID

ttl

(Optional) Time to live

capability

(Optional) Capability

mgmt_addr_type

(Optional) Management Address type

mgmt_addr

(Optional) Management Address

neigh_count

(Optional)

Command Mode

  • /exec

show lldp portid-subtype

show lldp portid-subtype [ __readonly__ <portid_subtype> ]

Syntax Description

show

Show running system information

lldp

Show information about lldp

portid-subtype

Show lldp portid-subtype

__readonly__

(Optional)

portid_subtype

(Optional) portid-subtype for LLDP TLV and MIBs

Command Mode

  • /exec

show lldp timers

show lldp timers [ __readonly__ <ttl> <reinit> <tx_interval> <tx_delay> <hold_mplier> <notification_interval> ]

Syntax Description

show

Show running system information

lldp

Show information about lldp

timers

Show lldp timers

__readonly__

(Optional)

ttl

(Optional) Time to Live for lldp info

reinit

(Optional) Interface reinit timer

tx_interval

(Optional) Wait interval between successive transmit

tx_delay

(Optional) Delay between successive frame transmissions

hold_mplier

(Optional) Hold multiplier for ttl

notification_interval

(Optional) Notification interval for SNMP trap

Command Mode

  • /exec

show lldp tlv-select

show lldp tlv-select [ __readonly__ <management-address-v4> <management-address-v6> <port-description> <port-vlan> <power-management> <system-capabilities> <system-description> <system-name> <dcbxp-cin-cee> [ <dcbxp-cn> ] [ <dcbxp-ets-cfg> ] [ <dcbxp-ets-reco> ] [ <dcbxp-pfc-cfg> ] [ <dcbxp-app-pri> ] [ <dcbxp-app-vlan> ] ]

Syntax Description

show

Show running system information

lldp

Show information about lldp

tlv-select

Show lldp tlv-select

__readonly__

(Optional)

management-address-v4

(Optional) Management address v4

management-address-v6

(Optional) Management address v6

port-description

(Optional) Port description

port-vlan

(Optional) Port vlan

power-management

(Optional) IEEE 802.3 DTE Power via MDI TLV

system-capabilities

(Optional) System capabilities

system-description

(Optional) System description

system-name

(Optional) System name

dcbxp-cin-cee

(Optional) DCBXP CIN or CEE

dcbxp-cn

(Optional) DCBXP Congestion Notification

dcbxp-ets-cfg

(Optional) DCBXP ETS Configuration

dcbxp-ets-reco

(Optional) DCBXP ETS Recommendation

dcbxp-pfc-cfg

(Optional) DCBXP PFC Configuration

dcbxp-app-pri

(Optional) DCBXP Application Priorities

dcbxp-app-vlan

(Optional) DCBXP Application VLAN's

Command Mode

  • /exec

show lldp traffic

show lldp traffic [ __readonly__ <tx_cnt> <aged_cnt> <rx_cnt> <rx_err> <disc_cnt> <unrecognized_tlv> ]

Syntax Description

show

Show running system information

lldp

Show information about lldp

traffic

Show lldp counters

__readonly__

(Optional)

tx_cnt

(Optional) Transmit count

aged_cnt

(Optional) Aged out count

rx_cnt

(Optional) Received count

rx_err

(Optional) Received error count

disc_cnt

(Optional) Disconnect count

unrecognized_tlv

(Optional) Unrecognized TLV count

Command Mode

  • /exec

show lldp traffic interface

show lldp traffic interface <if> [ __readonly__ <interface> <tx_cnt> <aged_cnt> <rx_cnt> <rx_err> <disc_cnt> <unrecognized_tlv> ]

Syntax Description

show

Show running system information

lldp

Show information about lldp

traffic

Show lldp counters

interface

Show lldp traffic counters on an interface

if

Enter interface

__readonly__

(Optional)

interface

(Optional) Interface ID

tx_cnt

(Optional) Transmit count

aged_cnt

(Optional) Aged out count

rx_cnt

(Optional) Received count

rx_err

(Optional) Received error count

disc_cnt

(Optional) Disconnect count

unrecognized_tlv

(Optional) Unrecognized TLV count

Command Mode

  • /exec

show locator-led status

show locator-led status [ __readonly__ { TABLE_loc_led_stat <component> <status> } ]

Syntax Description

show

Show running system information

locator-led

blink locator led on device

status

status

__readonly__

(Optional)

TABLE_loc_led_stat

(Optional)

component

(Optional)

status

(Optional)

Command Mode

  • /exec

show logging

show logging

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

Command Mode

  • /exec

show logging console

show logging console

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

console

Show console logging configuration

Command Mode

  • /exec

show logging info

show logging info [ __readonly__ { <console_status> [ <console_severity> ] } { <monitor_status> [ <monitor_severity> ] } { <linecard_status> [ <linecard_severity> ] } { <log_timestamp> } [ { <source_interface_status> } [ <source_interface_intf> | <source_interface_intf_index><source_interface_error> ] ] { <server_status> [ { TABLE_logserver <server><forwarding><severity><facility><vrf><port> [ <transport> ] } ] } { { <origin_id_status> } [ <origin_id> ] } [ [ <logflash_status> ] [ <logflash_severity> ] ] { <logfile_status> [ <logfile_name><logfile_severity><logfile_size> ] } { { TABLE_facility <fac_name><def_level><cur_level> } { <fac_info> } } ]

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

info

Show logging configuration

__readonly__

(Optional)

console_status

(Optional) console logging status

console_severity

(Optional) console logging level

monitor_status

(Optional) monitor logging status

monitor_severity

(Optional) monitor logging level

linecard_status

(Optional) linecard logging status

linecard_severity

(Optional) linecard logging level

log_timestamp

(Optional) timestamp unit

source_interface_status

(Optional) source-interface logging status

source_interface_intf

(Optional) source-interface interface

server_status

(Optional) logging server status

TABLE_logserver

(Optional) output of show logging server

transport

(Optional) remote server transport

origin_id_status

(Optional) origin-id status

origin_id

(Optional) origin-id

logflash_status

(Optional) logflash status

logflash_severity

(Optional) logflash level

logfile_status

(Optional) logfile status

TABLE_facility

(Optional) output of show logging level(facility)

fac_info

(Optional) level info

Command Mode

  • /exec

show logging ip access-list cache

show logging ip access-list cache [ detail ] [ __readonly__ <disp_flags> <sgt> <src_ip> <dst_ip> <src_port> <dst_port> <if_index> <proto> <hit_cnt> <acl_name> <acl_num> <acl_permit> <acl_ingress> <acl_type> <acl_appl_if_index> <acl_fltr_hit_cnt> ]

Syntax Description

show

Show running system information

logging

logging information

ip

IP configuration

access-list

Access-list

cache

logging

detail

(Optional) Show additional details about entries in cache

__readonly__

(Optional)

disp_flags

(Optional) Display flags

sgt

(Optional) SGT

src_ip

(Optional) Source IP

dst_ip

(Optional) Dest IP

src_port

(Optional) Source port

dst_port

(Optional) Dest port

if_index

(Optional) Interface

proto

(Optional) Protocol

hit_cnt

(Optional) Hits

acl_name

(Optional) ACL Name

acl_num

(Optional) ACL Number

acl_permit

(Optional) ACL Permit

acl_ingress

(Optional) ACL Ingress

acl_type

(Optional) ACL Filter Type

acl_appl_if_index

(Optional) ACL Applied Interface

acl_fltr_hit_cnt

(Optional) ACL Filter Count

Command Mode

  • /exec

show logging ip access-list status

show logging ip access-list status [ __readonly__ <num_entries> <seconds> <num_packets> ]

Syntax Description

show

Show running system information

logging

logging information

ip

IP configuration

access-list

Access-list

status

ACLLOG status

__readonly__

(Optional)

num_entries

(Optional) Max flows

seconds

(Optional) Log-update interval in seconds

num_packets

(Optional) threshold

Command Mode

  • /exec

show logging last

show logging last <i0>

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

last

Show last few lines of logfile

i0

Enter number of lines to display

Command Mode

  • /exec

show logging level

show logging level [ { auth | authpriv | cron | daemon | ftp | kernel | local0 | local1 | local2 | local3 | local4 | local5 | local6 | local7 | lpr | mail | news | syslog | user | uucp } ] [ __readonly__ { TABLE_facility <fac_name> <def_level> <cur_level> } ]

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

auth

(Optional) Show Authorization System logging configuration

authpriv

(Optional) Show Authorization (Private) logging configuration

cron

(Optional) Show Cron/at facility logging configuration

daemon

(Optional) Show System daemons logging configuration

ftp

(Optional) Show File Transfer System logging configuration

kernel

(Optional) Show kernel logging configuration

local0

(Optional) Show Local use daemons logging configuration

local1

(Optional) Show Local use daemons logging configuration

local2

(Optional) Show Local use daemons logging configuration

local3

(Optional) Show Local use daemons logging configuration

local4

(Optional) Show Local use daemons logging configuration

local5

(Optional) Show Local use daemons logging configuration

local6

(Optional) Show Local use daemons logging configuration

local7

(Optional) Show Local use daemons logging configuration

lpr

(Optional) Show Line Printer System logging configuration

mail

(Optional) Show Mail System logging configuration

news

(Optional) Show USENET news logging configuration

syslog

(Optional) Show Internal Syslog Messages logging configuration

user

(Optional) Show user process logging configuration

uucp

(Optional) Show Unix-to-Unix copy system logging configuration

__readonly__

(Optional)

fac_name

(Optional) facility names

TABLE_facility

(Optional)

def_level

(Optional) default severity

cur_level

(Optional) current severity

Command Mode

  • /exec

show logging level

show logging level

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

Command Mode

  • /exec

show logging level aaa

show logging level aaa

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

aaa

Show aaa logging configuration

Command Mode

  • /exec

show logging level acllog

show logging level acllog

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

acllog

Show acllog logging configuration

Command Mode

  • /exec

show logging level aclmgr

show logging level aclmgr

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

aclmgr

Show aclmgr logging configuration

Command Mode

  • /exec

show logging level adbm

show logging level adbm

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

adbm

Show adbm logging configuration

Command Mode

  • /exec

show logging level adjmgr

show logging level adjmgr

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

adjmgr

Show adjmgr logging configuration

Command Mode

  • /exec

show logging level amt

show logging level amt

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

amt

Show amt logging configuration

Command Mode

  • /exec

show logging level arp

show logging level arp

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

arp

Show arp logging configuration

Command Mode

  • /exec

show logging level ascii-cfg

show logging level ascii-cfg

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ascii-cfg

Show ascii-cfg logging configuration

Command Mode

  • /exec

show logging level assoc_mgr

show logging level assoc_mgr

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

assoc_mgr

Show Association Manager Logging Configuration

Command Mode

  • /exec

show logging level backup

show logging level { backup | flexlink }

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

backup

Show Switchport Backup logging level

flexlink

Show Switchport Backup logging level

Command Mode

  • /exec

show logging level bfd

show logging level bfd

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

bfd

Show bfd logging configuration

Command Mode

  • /exec

show logging level bgp

show logging level bgp

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

bgp

Show BGP logging configuration

Command Mode

  • /exec

show logging level bloggerd

show logging level bloggerd

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

bloggerd

Show BloggerD logging configuration

Command Mode

  • /exec

show logging level bootvar

show logging level bootvar

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

bootvar

Show bootvar logging configuration

Command Mode

  • /exec

show logging level callhome

show logging level callhome

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

callhome

Show callhome logging configuration

Command Mode

  • /exec

show logging level capability

show logging level capability

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

capability

Show capability logging configuration

Command Mode

  • /exec

show logging level catena

show logging level catena

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

catena

Show catena logging configuration

Command Mode

  • /exec

show logging level cdp

show logging level cdp

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

cdp

Show CDP logging configuration

Command Mode

  • /exec

show logging level cert-enroll

show logging level cert-enroll

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

cert-enroll

Show Cert-enroll logging configuration

Command Mode

  • /exec

show logging level cert_enroll

show logging level cert_enroll

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

cert_enroll

Show Cert-enroll logging configuration

Command Mode

  • /exec

show logging level cfs

show logging level cfs

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

Command Mode

  • /exec

show logging level clis

show logging level clis

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

clis

Show CLIS logging configuration

Command Mode

  • /exec

show logging level clk_mgr

show logging level clk_mgr

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

clk_mgr

Show clock manager logging configuration

Command Mode

  • /exec

show logging level confcheck

show logging level confcheck

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

confcheck

Show confcheck logging configuration

Command Mode

  • /exec

show logging level copp

show logging level copp

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

copp

Show copp logging configuration

Command Mode

  • /exec

show logging level core

show logging level core

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

core

Show core daemon logging configuration

Command Mode

  • /exec

show logging level cts

show logging level cts

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

cts

Show cts logging configuration

Command Mode

  • /exec

show logging level dhcp_snoop

show logging level dhcp_snoop

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

dhcp_snoop

Show DHCP snoop logging configuration

Command Mode

  • /exec

show logging level diagnostic device_test

show logging level diagnostic device_test

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

diagnostic

Diagnostic commands

device_test

Show device_test logging configuration

Command Mode

  • /exec

show logging level diagnostic diagclient

show logging level diagnostic diagclient

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

diagnostic

Diagnostic commands

diagclient

Show diagclient logging configuration

Command Mode

  • /exec

show logging level diagnostic diagmgr

show logging level diagnostic diagmgr

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

diagnostic

Diagnostic commands

diagmgr

Show diagmgr logging configuration

Command Mode

  • /exec

show logging level dot1x

show logging level dot1x

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

dot1x

Show dot1x logging configuration

Command Mode

  • /exec

show logging level ecp

show logging level ecp

Syntax Description

show

Show running system information

logging

Modify message logging facilities

level

Facility parameter for syslog messages

ecp

Set syslog filter level for ECP

Command Mode

  • /exec

show logging level eigrp

show logging level eigrp [ <eigrp-ptag> ]

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

eigrp

Show EIGRP logging configuration

eigrp-ptag

(Optional) Process tag

Command Mode

  • /exec

show logging level eltm

show logging level eltm

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

eltm

Show eltm logging configuration

Command Mode

  • /exec

show logging level epp

show logging level epp

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

epp

Show epp logging configuration

Command Mode

  • /exec

show logging level ethdstats

show logging level ethdstats

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ethdstats

Show delta statistics logging configuration

Command Mode

  • /exec

show logging level ethpm

show logging level ethpm

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ethpm

Show ethpm logging configuration

Command Mode

  • /exec

show logging level evb

show logging level evb

Syntax Description

show

Show running system information

logging

Modify message logging facilities

level

Facility parameter for syslog messages

evb

Set syslog filter level for EVB

Command Mode

  • /exec

show logging level evmc

show logging level evmc

Syntax Description

show

Show running system information

logging

Show message logging facilities

level

Show facility logging configuration

evmc

Show level for evmc syslog messages

Command Mode

  • /exec

show logging level evmed

show logging level evmed

Syntax Description

show

Show running system information

logging

Show message logging facilities

level

Show facility logging configuration

evmed

Show level for evmed syslog messages

Command Mode

  • /exec

show logging level evms

show logging level evms

Syntax Description

show

Show running system information

logging

Show message logging facilities

level

Show facility logging configuration

evms

Show level for evms syslog messages

Command Mode

  • /exec

show logging level fabric forwarding

show logging level fabric forwarding

Syntax Description

show

Show running system information

logging

Modify message logging facilities

level

Facility parameter for syslog messages

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

Command Mode

  • /exec

show logging level fcoe_mgr

show logging level fcoe_mgr

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

fcoe_mgr

Show fcoe_mgr logging configuration

Command Mode

  • /exec

show logging level feature-mgr

show logging level feature-mgr

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

feature-mgr

Show feature manager logging configuration

Command Mode

  • /exec

show logging level fs-daemon

show logging level fs-daemon

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

fs-daemon

Show fs-daemon logging configuration

Command Mode

  • /exec

show logging level gpixm

show logging level gpixm

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

gpixm

Show global-pixm logging configuration

Command Mode

  • /exec

show logging level hardware-telemetry

show logging level hardware-telemetry

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

hardware-telemetry

Show hardware-telemetry logging configuration

Command Mode

  • /exec

show logging level hsrp

show logging level hsrp

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

hsrp

Show HSRP logging configuration

Command Mode

  • /exec

show logging level icam

show logging level icam

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

icam

Show icam logging configuration

Command Mode

  • /exec

show logging level im

show logging level im

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

im

Show im logging configuration

Command Mode

  • /exec

show logging level imp

show logging level imp

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

imp

Show imp logging configuration

Command Mode

  • /exec

show logging level interface-vlan

show logging level interface-vlan

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

interface-vlan

Show interface-vlan logging configuration

Command Mode

  • /exec

show logging level ip igmp

show logging level ip igmp

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ip

Display IP information

igmp

Show igmp logging configuration

Command Mode

  • /exec

show logging level ip msdp

show logging level ip msdp

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ip

Display IP information

msdp

Show msdp logging configuration

Command Mode

  • /exec

show logging level ip sla responder

show logging level ip sla responder

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ip

sla

Service Level Agreement (SLA)

responder

Show sla-responder logging configuration

Command Mode

  • /exec

show logging level ip sla sender

show logging level ip sla sender

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ip

sla

Service Level Agreement (SLA)

sender

Show sla-sender logging configuration

Command Mode

  • /exec

show logging level ip sla twamp-server

show logging level ip sla twamp-server

Syntax Description

show

Show running system information

logging

Show logging configuration and contents of logfile

level

Show facility logging configuration

ip

sla

Service Level Agreement (SLA)

twamp-server

Show sla-twamp-server logging configuration

Command Mode

  • /exec

show logging level ipconf

show logging level ipconf [ ipv6 ]

Syntax Description