I Show Commands
show icam entries acl module inst
show icam entries multicast module
show icam prediction entries acl module inst
show icam prediction entries multicast module
show icam prediction resource acl_tcam module inst
show icam prediction scale
show icam resource acl_tcam module inst
show icam scale
show ieth-header-decode
show imp client
show imp client sa
show inband-telemetry exporter
show inband-telemetry flow-profile
show inband-telemetry monitor
show inband-telemetry queue-profile
show inband-telemetry record
show inband-telemetry sessions
show inband-telemetry watchlist
show incompatibility-all system
show incompatibility system
show install
show install all failed-standby
show install all failure-reason
show install all impact
show install all impact epld
show install all status
show install all time-stats
show install epld status
show install impact
show install impact
show install impact detail
show install log
show install mode
show install packages
show install patches
show interface
show interface
show interface
show interface
show interface
show interface
show interface
show interface
show interface
show interface
show interface aggregate-counters
show interface aggregate-counters
show interface aggregate-counters
show interface bbcredit
show interface brief
show interface brief
show interface brief
show interface brief
show interface brief
show interface brief
show interface brief
show interface brief
show interface brief
show interface cable-diagnostics-tdr
show interface capabilities
show interface capabilities
show interface capabilities
show interface counters
show interface counters
show interface counters
show interface counters
show interface counters
show interface counters
show interface counters
show interface counters brief
show interface counters brief
show interface counters detailed
show interface counters detailed
show interface counters detailed
show interface counters detailed
show interface counters detailed all
show interface counters detailed all
show interface counters detailed all
show interface counters detailed all
show interface counters detailed all
show interface counters detailed cached
show interface counters details
show interface counters details
show interface counters errors
show interface counters errors
show interface counters errors
show interface counters snmp
show interface counters storm-control
show interface counters storm-control
show interface counters table
show interface counters trunk
show interface dampening
show interface debounce
show interface debounce
show interface description
show interface description
show interface description
show interface description
show interface description
show interface description
show interface description
show interface description
show interface detail-counters
show interface fcoe
show interface fec
show interface flowcontrol
show interface flowcontrol
show interface hardware-mappings
show interface mac-address
show interface mac-address
show interface priority-flow-control
show interface private-vlan mapping
show interface pruning
show interface snmp-ifindex
show interface status
show interface status
show interface status
show interface status
show interface status
show interface status
show interface status
show interface status err-disabled
show interface status err-disabled
show interface status err-vlans
show interface status err-vlans
show interface switchport
show interface switchport
show interface switchport backup
show interface transceiver
show interface transceiver
show interface transceiver
show interface transceiver fex-fabric
show interface transceiver fex-fabric
show interface transceiver inventory
show interface trunk
show interface trunk
show interface trunk vsan
show interface trunk vsan
show interface trunk vsan
show interface untagged-cos
show interface vlan mapping
show inventory
show ip adjacency
show ip amt relay
show ip amt route
show ip amt tunnel
show ip arp
show ip arp anycast topo-info
show ip arp client
show ip arp controller-statistics
show ip arp esi
show ip arp inspection
show ip arp inspection interfaces
show ip arp inspection log
show ip arp inspection statistics
show ip arp inspection vlan
show ip arp multihoming-statistics
show ip arp off-list
show ip arp open-flow error-statistics
show ip arp statistics
show ip arp suppression-cache
show ip arp suppression topo-info
show ip arp tunnel-statistics
show ip arp vpc-statistics
show ip as-path-access-list
show ip cache
show ip client
show ip community-list
show ip debug
show ip dhcp global statistics
show ip dhcp option82 suboption info interface
show ip dhcp relay
show ip dhcp relay address
show ip dhcp relay information trusted-sources
show ip dhcp relay statistics
show ip dhcp snooping
show ip dhcp snooping binding
show ip dhcp snooping statistics
show ip dhcp status
show ip dns source-interface
show ip dns source-interface vrf all
show ip eigrp
show ip eigrp accounting
show ip eigrp event-history
show ip eigrp event-history bfd
show ip eigrp event
show ip eigrp interfaces
show ip eigrp metric
show ip eigrp neighbors
show ip eigrp route-map statistics
show ip eigrp sia-event
show ip eigrp sia-statistics
show ip eigrp timers
show ip eigrp traffic
show ip extcommunity-list
show ip fib adjacency
show ip fib distribution
show ip fib distribution capture
show ip fib distribution clients
show ip fib distribution mroute
show ip fib distribution multicast
show ip fib distribution multicast outgoing-interface-list
show ip fib distribution state
show ip fib interfaces
show ip fib mroute
show ip fib mroute
show ip fib mroute txlist
show ip fib route
show ip fib route
show ip fib route recovered
show ip ftm statistics
show ip ftp source-interface
show ip ftp source-interface vrf all
show ip http source-interface
show ip http source-interface vrf all
show ip igmp event-history
show ip igmp groups
show ip igmp interface
show ip igmp local-groups
show ip igmp policy statistics reports
show ip igmp snooping
show ip igmp snooping event-history
show ip igmp snooping explicit-tracking
show ip igmp snooping filter details
show ip igmp snooping groups
show ip igmp snooping lookup-mode
show ip igmp snooping mac-oif
show ip igmp snooping mrouter
show ip igmp snooping pw vlan brief
show ip igmp snooping querier
show ip igmp snooping report statistics
show ip igmp snooping snmp mib adminMode
show ip igmp snooping snmp mib aliasingMode
show ip igmp snooping snmp mib cisV3ProcessEnableOperStatus
show ip igmp snooping snmp mib explicitTrackingTable
show ip igmp snooping snmp mib fallBackTime
show ip igmp snooping snmp mib fastBlockEnabled
show ip igmp snooping snmp mib fastleaveenabled
show ip igmp snooping snmp mib filterStatsTable
show ip igmp snooping snmp mib ifAccessGroupTable
show ip igmp snooping snmp mib ifConfigTable
show ip igmp snooping snmp mib ifLimitTable
show ip igmp snooping snmp mib ifLimitTotalTable
show ip igmp snooping snmp mib igmpsnoopingenabled
show ip igmp snooping snmp mib iterfaceStatsTable
show ip igmp snooping snmp mib lastMemeberQueryCount
show ip igmp snooping snmp mib lastMemeberQueryInterval
show ip igmp snooping snmp mib leaveQueryType
show ip igmp snooping snmp mib mcastGroupTable
show ip igmp snooping snmp mib mcastRouterCfgTable
show ip igmp snooping snmp mib mcastRouterConfigTable
show ip igmp snooping snmp mib multicastGroupConfigTable
show ip igmp snooping snmp mib multicastGroupPortListTable
show ip igmp snooping snmp mib multicastGroupTable
show ip igmp snooping snmp mib operMode
show ip igmp snooping snmp mib querierTable
show ip igmp snooping snmp mib reportsuppressionenabled
show ip igmp snooping snmp mib robustnessVariable
show ip igmp snooping snmp mib routerAlertCheckEnabled
show ip igmp snooping snmp mib sourceOnlyEntryAgingTime
show ip igmp snooping snmp mib sourceOnlyLearningEnabled
show ip igmp snooping snmp mib tcnFloodQueryCount
show ip igmp snooping snmp mib timeToLiveCheckEnabled
show ip igmp snooping snmp mib topoChanageQuerySolicitEnabled
show ip igmp snooping snmp mib v3ProcessEnabledAdminStatus
show ip igmp snooping snmp mib v3SnoopingSupport
show ip igmp snooping snmp mib vlanFilterConfigTable
show ip igmp snooping snmp mib vlanconfigtable
show ip igmp snooping statistics
show ip igmp vrf all
show ip interface
show ip load-sharing
show ip local-pt
show ip local policy
show ip logging
show ip mbgp
show ip mbgp
show ip mbgp community
show ip mbgp dampening
show ip mbgp extcommunity
show ip mbgp flap-statistics
show ip mbgp neighbors
show ip mbgp nexthop-database
show ip mbgp nexthop
show ip mbgp prefix-list
show ip mbgp received-paths
show ip mroute
show ip msdp count
show ip msdp event-history
show ip msdp mesh-group
show ip msdp peer
show ip msdp policy statistics sa-policy in
show ip msdp rpf
show ip msdp sa
show ip msdp sources
show ip msdp statistics
show ip msdp summary
show ip multicast vrf
show ip nat-alias
show ip nat max
show ip nat statistics
show ip nat timeout
show ip nat translations
show ip ospf
show ip ospf border-routers
show ip ospf database
show ip ospf database database-summary
show ip ospf database detail
show ip ospf event-history
show ip ospf event-history detail
show ip ospf ha
show ip ospf interface
show ip ospf interface brief
show ip ospf lsa-content-changed-list
show ip ospf memory
show ip ospf neighbors
show ip ospf neighbors detail
show ip ospf neighbors summary
show ip ospf policy statistics
show ip ospf request-list
show ip ospf retransmission-list
show ip ospf route
show ip ospf route summary
show ip ospf segment-routing global-block
show ip ospf segment-routing sid-database
show ip ospf sham-links
show ip ospf statistics
show ip ospf summary-address
show ip ospf traffic
show ip ospf traps-queue
show ip ospf virtual-links
show ip ospf virtual-links brief
show ip overlay-traffic
show ip pim bitfield
show ip pim config-sanity
show ip pim df
show ip pim event-history
show ip pim fabric info
show ip pim fabric legacy-vlans
show ip pim group-range
show ip pim host-proxy
show ip pim interface
show ip pim mdt
show ip pim mdt bgp
show ip pim mdt history interval
show ip pim mdt receive
show ip pim mdt send
show ip pim neighbor
show ip pim oif-list
show ip pim policy statistics
show ip pim policy statistics jp
show ip pim route
show ip pim rp-hash
show ip pim rp
show ip pim statistics
show ip pim vrf
show ip ping source-interface
show ip ping source-interface vrf all
show ip policy
show ip prefix-list
show ip process
show ip rip
show ip rip interface
show ip rip memory
show ip rip neighbor
show ip rip policy statistics redistribute
show ip rip route
show ip rip statistics
show ip route
show ip router-id
show ip sla application
show ip sla configuration
show ip sla enhanced-history collection-statistics
show ip sla enhanced-history distribution-statistics
show ip sla group schedule
show ip sla history
show ip sla reaction-configuration
show ip sla reaction-trigger
show ip sla responder
show ip sla statistics
show ip sla twamp connection detail
show ip sla twamp connection requests
show ip sla twamp session
show ip sla twamp standards
show ip ssh source-interface
show ip ssh source-interface vrf all
show ip static-route
show ip stats
show ip tcp mss
show ip telnet source-interface
show ip telnet source-interface vrf all
show ip tftp source-interface
show ip tftp source-interface vrf all
show ip traceroute source-interface
show ip traceroute source-interface vrf all
show ip traffic
show ip txlist list
show ip udp relay
show ip udp relay interface
show ip udp relay object-group
show ip verify source
show ipv6 adjacency
show ipv6 amt tunnel
show ipv6 bgp
show ipv6 bgp
show ipv6 bgp
show ipv6 bgp community
show ipv6 bgp dampening
show ipv6 bgp extcommunity
show ipv6 bgp flap-statistics
show ipv6 bgp neighbors
show ipv6 bgp nexthop-database
show ipv6 bgp nexthop
show ipv6 bgp received-paths
show ipv6 bgp regexp
show ipv6 bgp summary
show ipv6 cache
show ipv6 client
show ipv6 dhcp-ldra
show ipv6 dhcp-ldra statistics
show ipv6 dhcp guard policy
show ipv6 dhcp relay
show ipv6 dhcp relay statistics
show ipv6 eigrp route-map statistics
show ipv6 fragments
show ipv6 icmp
show ipv6 icmp global traffic
show ipv6 icmp interface
show ipv6 icmp ndp
show ipv6 icmp off-list
show ipv6 icmp process sdb
show ipv6 icmp vaddr
show ipv6 icmp vpc-statistics
show ipv6 interface
show ipv6 interface global
show ipv6 local-pt
show ipv6 local policy
show ipv6 mld groups
show ipv6 mld local-groups
show ipv6 mld vrf all
show ipv6 mroute
show ipv6 mtu
show ipv6 multicast vrf
show ipv6 nd ra dns search-list
show ipv6 nd ra dns server
show ipv6 nd raguard policy
show ipv6 nd rt-pref global pt
show ipv6 ndp
show ipv6 neighbor binding
show ipv6 neighbor binding mac
show ipv6 neighbor static
show ipv6 pim bitfield
show ipv6 pim df
show ipv6 pim embed-rp
show ipv6 pim event-history
show ipv6 pim fabric info
show ipv6 pim fabric legacy-vlans
show ipv6 pim group-range
show ipv6 pim interface show ipv6 pim interface
show ipv6 pim neighbor
show ipv6 pim oif-list
show ipv6 pim policy statistics jp
show ipv6 pim route
show ipv6 pim rp-hash
show ipv6 pim rp
show ipv6 pim statistics
show ipv6 pim vrf
show ipv6 policy
show ipv6 prefix-list
show ipv6 process
show ipv6 process sdb
show ipv6 raguard statistics
show ipv6 rip policy statistics redistribute
show ipv6 route
show ipv6 routers
show ipv6 snooping capture-policy
show ipv6 snooping counters vlan
show ipv6 snooping events
show ipv6 snooping features
show ipv6 snooping messages
show ipv6 snooping policies
show ipv6 snooping policy
show ipv6 snooping pss database
show ipv6 static-route
show ipv6 statistics
show ipv6 traffic
show isis
show isis adjacency
show isis csnp
show isis database
show isis distribute-ls
show isis event-history
show isis hostname
show isis interface
show isis ipv6 redistribute route
show isis ipv6 route-map statistics
show isis ipv6 route
show isis ipv6 summary-address
show isis lslib
show isis lsp free-list
show isis mesh-group
show isis non tlv overflow-list
show isis redistribute route
show isis route-map statistics
show isis route
show isis route is
show isis rrm
show isis segment-routing local-mapcache
show isis segment-routing mapcache
show isis segment-routing remote-srgb
show isis segment-routing sids
show isis spf-adjacency
show isis spf-log
show isis srm
show isis ssn
show isis statistics
show isis summary-address
show isis topology
show isis traffic
show itd
show itd
show itd session device-group
show itd statistics
show itd vrf

I Show Commands

show icam entries acl module inst

show icam entries acl module <module> inst <inst> [ history <num_intervals> ] [ sort { top <top_x> | sort-order { ascending | descending } | filter <f_f> [ exact ] | top <top_x> sort-order { ascending | descending } | top <top_x> filter <f_f> [ exact ] | top <top_x> sort-order { ascending | descending } filter <f_f> [ exact ] | top <top_x> filter <f_f> [ exact ] sort-order { ascending | descending } | sort-order { ascending | descending } top <top_x> | sort-order { ascending | descending } filter <f_f> [ exact ] | sort-order { ascending | descending } filter <f_f> [ exact ] top <top_x> | sort-order { ascending | descending } top <top_x> filter <f_f> [ exact ] | filter <f_f> [ exact ] top <top_x> | filter <f_f> [ exact ] sort-order { ascending | descending } | filter <f_f> [ exact ] top <top_x> sort-order { ascending | descending } | filter <f_f> [ exact ] sort-order { ascending | descending } top <top_x> } ] [ __readonly__ <module> <instance> [ <num_intervals> ] [ { TABLE_ACL_entries <Feature> <Pkt_Type> <SourceIP_Mask_DestIP_Mask> <Action> <Intf_name> <Stats> [ <Rate> ] } ] ]

Syntax Description


show	Show running system information
icam	intelligent CAM
entries	TCAM Entries with result and stats
acl	ACL entries
module	Module Number
module	Enter Module Number
inst	ASIC/Forwarding Engine Instance Number
inst	Enter Instance Number
sort	(Optional) Sorted display
top	(Optional) Show top x% entries (Default:100%)
top_x	(Optional) x% of entries to be displayed
sort-order	(Optional) Choose the order of displaying sorted entries (Default:descending)
ascending	(Optional) Sort in Ascending order of Stats
descending	(Optional) Sort in Descending order of Stats
filter	(Optional) Feature to be filtered (Default:All)
f_f	(Optional) Enter feature to be filtered
exact	(Optional) Exact match for feature filter
history	(Optional) Show entries history
num_intervals	(Optional) Number of intervals to display
__readonly__	(Optional) Read Only
module	(Optional) Module number
instance	(Optional) Instance number
num_intervals	(Optional) Number of intervals displayed
TABLE_ACL_entries	(Optional) Table for ACL entries
Feature	(Optional) Feature name
Pkt_Type	(Optional) Packet type
SourceIP_Mask_DestIP_Mask	(Optional) IP addresses
Action	(Optional) Action
Intf_name	(Optional) Interface name
Stats	(Optional) Total stats
Rate	(Optional) Rate packets/sec

Command Mode

/exec

show icam entries multicast module

show icam entries multicast module <module> [ history <num_intervals> ] [ sort { top <top_x> | sort-order { ascending | descending } | top <top_x> sort-order { ascending | descending } | sort-order { ascending | descending } top <top_x> } ] [ __readonly__ <module> [ <num_intervals> ] [ { TABLE_MULTICAST_entries <Vdc> <Table_Id> <Source_Mask> <Group_Mask> <Rpf> <Stats> [ <Rate> ] } ] ]

Syntax Description


show	Show running system information
icam	intelligent CAM
entries	TCAM Entries with result and stats
multicast	Multicast entries
module	Module Number
module	Enter Module Number
sort	(Optional) Sorted display
top	(Optional) Show top x% entries (Default:100%)
top_x	(Optional) x% of entries to be displayed
sort-order	(Optional) Choose the order of displaying sorted entries (Default:Descending)
ascending	(Optional) Sort in Ascending order of Stats
descending	(Optional) Sort in Descending order of Stats
history	(Optional) Show entries history
num_intervals	(Optional) Number of intervals to display
__readonly__	(Optional) Read Only
module	(Optional) Module number
num_intervals	(Optional) Number of intervals displayed
TABLE_MULTICAST_entries	(Optional) Table for Multicast entries
Vdc	(Optional) VDC id
Table_Id	(Optional) Table id
Source_Mask	(Optional) Source address
Group_Mask	(Optional) Group address
Rpf	(Optional) RPF/Ordinal
Stats	(Optional) Total stats
Rate	(Optional) Rate packets/sec

Command Mode

/exec

show icam prediction entries acl module inst

show icam prediction entries acl module <module> inst <inst> <YYYY> <Month> <Date> <Time> [ top <top_x> ] [ __readonly__ <module> <instance> [ { TABLE_PREDICTION_ACL_entries <Feature> <Pkt_Type> <Value_Mask> <Action> <Intf_name> <Stats> <Prediction> } ] ]

Syntax Description


show	Show running system information
icam	intelligent CAM
prediction	Machine learning prediction
entries	TCAM Entries with result and stats
acl	ACL entries
module	Module Number
module	Enter Module Number
inst	ASIC/Forwarding Engine Instance Number
inst	Enter Instance Number
YYYY	Enter year in YYYY format
Month	Enter Month as Jan, Feb, Mar, ..., Oct, Nov, or Dec
Date	Enter day of month in dd format
Time	Enter hour, minutes, seconds as HH:MM:SS
top	(Optional) Show top x% entries (Default:1%)
top_x	(Optional) x% of entries to be displayed
__readonly__	(Optional) Read Only
module	(Optional) Module number
instance	(Optional) Instance number
TABLE_PREDICTION_ACL_entries	(Optional) Table for ACL entries prediction
Feature	(Optional) Feature name
Pkt_Type	(Optional) Packet type
Value_Mask	(Optional) Value mask
Action	(Optional) Action
Intf_name	(Optional) Interface name
Stats	(Optional) Current stats
Prediction	(Optional) Prediction

Command Mode

/exec

show icam prediction entries multicast module

show icam prediction entries multicast module <module> <YYYY> <Month> <Date> <Time> [ top <top_x> ] [ __readonly__ <module> [ { TABLE_PREDICTION_MULTICAST_entries <Vdc> <Table_Id> <Source_Mask> <Group_Mask> <Rpf> <Stats> <Prediction> } ] ]

Syntax Description


show	Show running system information
icam	intelligent CAM
prediction	Machine learning prediction
entries	TCAM Entries with result and stats
multicast	Multicast entries
module	Module Number
module	Enter Module Number
YYYY	Enter year in YYYY format
Month	Enter Month as Jan, Feb, Mar, ..., Oct, Nov, or Dec
Date	Enter day of month in dd format
Time	Enter hour, minutes, seconds as HH:MM:SS
top	(Optional) Show top x% entries (Default:1%)
top_x	(Optional) x% of entries to be displayed
__readonly__	(Optional) Read Only
module	(Optional) Module number
TABLE_PREDICTION_MULTICAST_entries	(Optional) Table for multicast entries prediction
Vdc	(Optional) VDC id
Table_Id	(Optional) Table id
Source_Mask	(Optional) Source address
Group_Mask	(Optional) Group address
Rpf	(Optional) RPF/Ordinal
Stats	(Optional) Current stats
Prediction	(Optional) Prediction

Command Mode

/exec

show icam prediction resource acl_tcam module inst

show icam prediction resource { acl_tcam | fib_tcam } module <module> inst <inst> <YYYY> <Month> <Date> <Time> [ __readonly__ <module> <instance> [ { TABLE_PREDICTION_ACL_feature <Feature> <Dir> <TCAM> <BANK> <Feature_Entries> <Free_Entries> <Percent_Util> } ] [ <mod> <inst> { TABLE_PREDICTION_ACL_tcam <Tcam_no> <Bank_no> <Used> <Free> <Percent_Util> } ] [ { TABLE_PREDICTION_FIB_tcam <Class> <Used_Entries> <Max_Entries> <Percent_Util> } ] ]

Syntax Description


show	Show running system information
icam	intelligent CAM
prediction	Machine learning prediction
resource	TCAM Resource utilization
acl_tcam	ACL TCAM resource
fib_tcam	FIB TCAM resource
module	Module Number
module	Enter Module Number
inst	ASIC/Forwarding Engine Instance Number
inst	Enter Instance Number
YYYY	Enter year in YYYY format
Month	Enter Month as Jan, Feb, Mar, ..., Oct, Nov, or Dec
Date	Enter day of month in dd format
Time	Enter hour, minutes, seconds as HH:MM:SS
__readonly__	(Optional) Read Only
module	(Optional) Module number
instance	(Optional) Instance number
TABLE_PREDICTION_ACL_feature	(Optional) ACL Feature utilization predictions
Feature	(Optional) Feature name
Dir	(Optional) Direction
TCAM	(Optional) TCAM entry
BANK	(Optional) BANK entry
Feature_Entries	(Optional) Feature_Entries
Free_Entries	(Optional) Free_Entries
Percent_Util	(Optional) Percent_Util
mod	(Optional) Module number
inst	(Optional) Instance number
TABLE_PREDICTION_ACL_tcam	(Optional) ACL TCAM utilization predictions
Tcam_no	(Optional) Tcam number
Bank_no	(Optional) Bank number
Used	(Optional) Used
Free	(Optional) Free
Percent_Util	(Optional) Percent_Util
TABLE_PREDICTION_FIB_tcam	(Optional) FIB TCAM utilization predictions
Class	(Optional) FIB class
Used_Entries	(Optional) Used entries
Max_Entries	(Optional) Max entries
Percent_Util	(Optional) Percent_Util

Command Mode

/exec

show icam prediction scale

show icam prediction scale [ { { l2-switching [ mac-addresses | mst-instances | mst-vports | rpvst-vports | rpvst-vlans | vlans ] } | { multicast-routing [ multicast-routes | igmp-groups | pim-neighbors | outgoing-interfaces ] } | { unicast-routing [ bfd-sessions | eigrp-routes | ipv4-arp | ipv4-host-routes | ipv6-host-routes | ipv4-isis-routes | ospf-nbr | ospf-lsa | ospf-area | ospf-vrf | ospf-passive-intf ] } | { vxlan [ test ] } } ] <YYYY> <Month> <Date> <Time> [ __readonly__ [ <Info_Thres> <Warn_Thres> <Crit_Thres> ] [ { TABLE_technology <Technology> [ { TABLE_feature <Feature> <Verified_Scale> <Config_Scale> [ { TABLE_feature_stats <Used_Entries> [ <Cur_Util> ] } ] } ] } ] ]

Syntax Description


show	Show running system information
icam	intelligent CAM
scale	Verified scale
prediction	Machine learning prediction
l2-switching	(Optional) Layer 2 switching
multicast-routing	(Optional) Multicast routing
unicast-routing	(Optional) Unicast routing
vxlan	(Optional) VxLAN
mac-addresses	(Optional) MAC addresses
mst-instances	(Optional) MST instances
mst-vports	(Optional) MST virtual ports
rpvst-vports	(Optional) RPVST virtual ports
rpvst-vlans	(Optional) RPVST VLANs
vlans	(Optional) VLANs
multicast-routes	(Optional) Multicast routes
igmp-groups	(Optional) IGMP groups
pim-neighbors	(Optional) PIM neighbors
outgoing-interfaces	(Optional) Outgoing interfaces
bfd-sessions	(Optional) BFD sessions
eigrp-routes	(Optional) EIGRP routes
ipv4-arp	(Optional) IPv4 ARP
ipv4-host-routes	(Optional) IPv4 host routes
ipv6-host-routes	(Optional) IPv6 host routes
ipv4-isis-routes	(Optional) IPv4 IS-IS routes
ospf-nbr	(Optional) OSPF neighbors
ospf-lsa	(Optional) OSPF LSAs
ospf-area	(Optional) OSPF Areas
ospf-vrf	(Optional) OSPF VRFs
ospf-passive-intf	(Optional) OSPF passive interfaces
test	(Optional) VxLAN test
__readonly__	(Optional) Read Only
Info_Thres	(Optional) Configured info threshold percent
Warn_Thres	(Optional) Configured warning threshold percent
Crit_Thres	(Optional) Configured critical threshold percent
TABLE_technology	(Optional) Table technology
Technology	(Optional) Technology name
TABLE_feature	(Optional) Table feature
Feature	(Optional) Feature name
Verified_Scale	(Optional) Verified scale
Config_Scale	(Optional) Configured scale
TABLE_feature_stats	(Optional) Table feature stats
Used_Entries	(Optional) Used entries
Cur_Util	(Optional) Current utilization
YYYY	Enter year in YYYY format
Month	Enter Month as Jan, Feb, Mar, ..., Oct, Nov, or Dec
Date	Enter day of month in dd format
Time	Enter hour, minutes, seconds as HH:MM:SS

Command Mode

/exec

show icam resource acl_tcam module inst

show icam resource { acl_tcam | fib_tcam } module <module> inst <inst> [ history <num_intervals> ] [ __readonly__ <module> <instance> [ { TABLE_feature_resource <Feature> <TCAM> <BANK> [ { TABLE_ingress_stats <Feature_Entries> <Free_Entries> <Percent_Util> <Timestamp> } ] } ] [ { TABLE_egress_feature_resource <Feature> <TCAM> <BANK> [ { TABLE_egress_stats <Feature_Entries> <Free_Entries> <Percent_Util> <Timestamp> } ] } ] [ <mod> <inst> { TABLE_tcam_bank_utilization <Tcam_no> <Bank_no> [ { TABLE_tcam_bank_stats <Used> <Free> <Percent_Util> <Timestamp> } ] } ] [ { TABLE_global_configs <Atomic_Update> <Bank_Chain_Mode> <Dynamic_Bank_Mapping> <LOU_Threshold_Value> } ] [ { TABLE_fib_resource <Class> [ { TABLE_fib_stats <Used_Entries> <Max_Entries> <Percent_Util> <Timestamp> } ] } ] ]

Syntax Description


show	Show running system information
icam	intelligent CAM
resource	TCAM Resource utilization
acl_tcam	ACL TCAM resource
fib_tcam	FIB TCAM resource
module	Module Number
module	Enter Module Number
inst	ASIC/Forwarding Engine Instance Number
inst	Enter Instance Number
history	(Optional) Show resource history
num_intervals	(Optional) Number of intervals in history
__readonly__	(Optional) Read Only
module	(Optional) Module number
instance	(Optional) Instance number
TABLE_feature_resource	(Optional) Table for ingress feature resources
Feature	(Optional) Feature name
TCAM	(Optional) TCAM entry
BANK	(Optional) BANK entry
TABLE_ingress_stats	(Optional) Table for ingress feature stats
Feature_Entries	(Optional) Feature_Entries
Free_Entries	(Optional) Free_Entries
Percent_Util	(Optional) Percent_Util
Timestamp	(Optional) Timestamp
TABLE_egress_feature_resource	(Optional) Table for egress feature resources
Feature	(Optional) Feature name
TCAM	(Optional) TCAM entry
BANK	(Optional) BANK entry
TABLE_egress_stats	(Optional) Table for egress feature stats
Feature_Entries	(Optional) Feature_Entries
Free_Entries	(Optional) Free_Entries
Percent_Util	(Optional) Percent_Util
Timestamp	(Optional) Timestamp
mod	(Optional) Module number
inst	(Optional) Instance number
TABLE_tcam_bank_utilization	(Optional) Table for tcam and bank utilization
Tcam_no	(Optional) Tcam number
Bank_no	(Optional) Bank number
TABLE_tcam_bank_stats	(Optional) Table for tcam and bank stats
Used	(Optional) Used
Free	(Optional) Free
Percent_Util	(Optional) Percent_Util
Timestamp	(Optional) Timestamp
TABLE_global_configs	(Optional) TABLE_global_configs
Atomic_Update	(Optional) Atomic_Update
Bank_Chain_Mode	(Optional) Bank_Chain_Mode
Dynamic_Bank_Mapping	(Optional) Dynamic_Bank_Mapping
LOU_Threshold_Value	(Optional) LOU_Threshold_Value
TABLE_fib_resource	(Optional) Table for fib resources
Class	(Optional) FIB class
TABLE_fib_stats	(Optional) Table for fib resource stats
Used_Entries	(Optional) Used entries
Max_Entries	(Optional) Max entries
Percent_Util	(Optional) Percent_Util
Timestamp	(Optional) Timestamp

Command Mode

/exec

show icam scale

show icam scale [ { { l2-switching [ mac-addresses | mst-instances | mst-vports | rpvst-vports | rpvst-vlans | vlans ] } | { multicast-routing [ multicast-routes | igmp-groups | pim-neighbors | outgoing-interfaces ] } | { unicast-routing [ bfd-sessions | eigrp-routes | ipv4-arp | ipv4-host-routes | ipv6-host-routes | ipv4-isis-routes | ospf-nbr | ospf-lsa | ospf-area | ospf-vrf | ospf-passive-intf ] } | { vxlan [ test ] } } ] [ history <num_intervals> | utilization | thresholds ] [ __readonly__ [ <Info_Thres> <Warn_Thres> <Crit_Thres> ] [ { TABLE_technology <Technology> [ { TABLE_feature <Feature> <Verified_Scale> <Config_Scale> [ { TABLE_feature_stats <Used_Entries> [ <Cur_Util> ] [ <Thres_Exceeded> <Polled_TS> ] [ <Avg_Util> ] [ <Week_Util> <Week_TS> ] [ <Peak_Util> <Peak_TS> ] [ <Info_Thres_Exceed> <Info_Thres_Exceed_TS> <Warn_Thres_Exceed> <Warn_Thres_Exceed_TS> <Crit_Thres_Exceed> <Crit_Thres_Exceed_TS> ] } ] } ] } ] ]

Syntax Description


show	Show running system information
icam	intelligent CAM
scale	Verified scale
l2-switching	(Optional) Layer 2 switching
multicast-routing	(Optional) Multicast routing
unicast-routing	(Optional) Unicast routing
vxlan	(Optional) VxLAN
mac-addresses	(Optional) MAC addresses
mst-instances	(Optional) MST instances
mst-vports	(Optional) MST virtual ports
rpvst-vports	(Optional) RPVST virtual ports
rpvst-vlans	(Optional) RPVST VLANs
vlans	(Optional) VLANs
multicast-routes	(Optional) Multicast routes
igmp-groups	(Optional) IGMP groups
pim-neighbors	(Optional) PIM neighbors
outgoing-interfaces	(Optional) Outgoing interfaces
bfd-sessions	(Optional) BFD sessions
eigrp-routes	(Optional) EIGRP routes
ipv4-arp	(Optional) IPv4 ARP
ipv4-host-routes	(Optional) IPv4 host routes
ipv6-host-routes	(Optional) IPv6 host routes
ipv4-isis-routes	(Optional) IPv4 IS-IS routes
ospf-nbr	(Optional) OSPF neighbors
ospf-lsa	(Optional) OSPF LSAs
ospf-area	(Optional) OSPF Areas
ospf-vrf	(Optional) OSPF VRFs
ospf-passive-intf	(Optional) OSPF passive interfaces
test	(Optional) VxLAN test
history	(Optional) Show scale history
num_intervals	(Optional) Number of intervals in history
utilization	(Optional) Show utilization statistics
thresholds	(Optional) Show thresholds statistics
__readonly__	(Optional) Read Only
Info_Thres	(Optional) Configured info threshold percent
Warn_Thres	(Optional) Configured warning threshold percent
Crit_Thres	(Optional) Configured critical threshold percent
TABLE_technology	(Optional) Table technology
Technology	(Optional) Technology name
TABLE_feature	(Optional) Table feature
Feature	(Optional) Feature name
Verified_Scale	(Optional) Verified scale
Config_Scale	(Optional) Configured scale
TABLE_feature_stats	(Optional) Table feature stats
Used_Entries	(Optional) Used entries
Cur_Util	(Optional) Current utilization
Thres_Exceeded	(Optional) Threshold type exceeded
Polled_TS	(Optional) Polled timestamp
Avg_Util	(Optional) Average utilization
Week_Util	(Optional) 1 week utilization
Week_TS	(Optional) 1 week peak utilization timestamp
Peak_Util	(Optional) Peak utilization
Peak_TS	(Optional) Peak utilization timestamp
Info_Thres_Exceed	(Optional) Number of times info threshold exceeded
Info_Thres_Exceed_TS	(Optional) Last info threshold exceeded timestamp
Warn_Thres_Exceed	(Optional) Number of times warning threshold exceeded
Warn_Thres_Exceed_TS	(Optional) Last warning threshold exceeded timestamp
Crit_Thres_Exceed	(Optional) Number of times critical threshold exceeded
Crit_Thres_Exceed_TS	(Optional) Last critical threshold exceeded timestamp

Command Mode

/exec

show ieth-header-decode

show ieth-header-decode <ieth>

Syntax Description


show	Show running system information
ieth-header-decode	Show decode of ieth header
ieth	ieth header in hex (0xFF...) or string (FF..) form

Command Mode

/exec

show imp client

Syntax Description


show	Show running system information
imp	ipsec management process
client	Show ipsec clients name

Command Mode

/exec

show imp client sa

Syntax Description


show	Show running system information
imp	IPSec management process
client	IMP clinet
sa	Display all SAs

Command Mode

/exec

show inband-telemetry exporter

show inband-telemetry exporter [ name ] [ <exportername> ] [ __readonly__ <exporter> <description> <dest> <vrf> <vrf_id> <vrf_resolved> <dest_udp> <source_intf> <source_ip> <dscp> ]

Syntax Description


show	Show running system information
inband-telemetry	Show INT information
exporter	Show INT Exporter Configuration
name	(Optional) Show a specific INT Exporter
exportername	(Optional) Specify an exporter
__readonly__	(Optional)
exporter	(Optional)
description	(Optional)
dest	(Optional)
vrf	(Optional)
vrf_id	(Optional)
vrf_resolved	(Optional)
dest_udp	(Optional)
source_intf	(Optional)
source_ip	(Optional)
dscp	(Optional)

Command Mode

/exec

show inband-telemetry flow-profile

show inband-telemetry flow-profile [ name ] [ <flow-profilename> ] [ __readonly__ <flow-profile> <description> <dscp> <age> <latency> ]

Syntax Description


show	Show running system information
inband-telemetry	Show INT information
flow-profile	Show INT flow Profile Configuration
name	(Optional) Show a specific INT flow Profile
flow-profilename	(Optional) Specify an flow Profile
__readonly__	(Optional)
flow-profile	(Optional)
description	(Optional)
dscp	(Optional)
age	(Optional)
latency	(Optional)

Command Mode

/exec

show inband-telemetry monitor

show inband-telemetry monitor [ name ] [ <monitorname> [ cache [ detailed ] ] ] [ __readonly__ <monitor> <use_count> <description> <record> <event> <exporter> <bucket_id> <src_addr> <dest_addr> <watchlist> ]

Syntax Description


show	Show running system information
inband-telemetry	Show INT information
monitor	Show Monitor Configuration
name	(Optional) Show a specific INT Monitor
monitorname	(Optional) Specify a monitor
cache	(Optional) Flow monitor cache contents
detailed	(Optional) Show the entire cache contents
__readonly__	(Optional)
monitor	(Optional)
use_count	(Optional)
description	(Optional)
record	(Optional)
event	(Optional)
exporter	(Optional)
bucket_id	(Optional)
src_addr	(Optional)
dest_addr	(Optional)
watchlist	(Optional)

Command Mode

/exec

show inband-telemetry queue-profile

show inband-telemetry queue-profile [ name ] [ <queue-profilename> ] [ __readonly__ <queue-profile> <description> <depth> <latency> ]

Syntax Description


show	Show running system information
inband-telemetry	Show INT information
queue-profile	Show INT Queue Profile Configuration
name	(Optional) Show a specific INT Queue Profile
queue-profilename	(Optional) Specify an Queue Profile
__readonly__	(Optional)
queue-profile	(Optional)
description	(Optional)
depth	(Optional)
latency	(Optional)

Command Mode

/exec

show inband-telemetry record

show inband-telemetry record [ name ] [ { <recordname> } ] [ __readonly__ <record> <description> <use_count> ]

Syntax Description


show	Show running system information
inband-telemetry	Show INT information
record	Show Record Configuration
name	(Optional) Show the configuration for a specific INT Record
recordname	(Optional) Specify a record
__readonly__	(Optional)
record	(Optional)
description	(Optional)
use_count	(Optional)

Command Mode

/exec

show inband-telemetry sessions

show inband-telemetry sessions [ <monitorname> ] [ __readonly__ <monitor> ]

Syntax Description


show	Show running system information
inband-telemetry	Show INT information
sessions	Show Session Configuration
monitorname	(Optional) Specify a monitor
__readonly__	(Optional)
monitor	(Optional)

Command Mode

/exec

show inband-telemetry watchlist

show inband-telemetry watchlist [ name ] [ { <watchlistname> } ] [ __readonly__ <watchlist> <use_count> <description> <num_aces> <ace_seq_num> <ace_action> <ace_type> <ace_sip> <ace_sip_len> <ace_dip> <ace_dip_len> ]

Syntax Description


show	Show running system information
inband-telemetry	Show INT information
watchlist	Show watchlist Configuration
name	(Optional) Show the configuration for a specific INT Record
watchlistname	(Optional) Specify a watchlist
__readonly__	(Optional)
watchlist	(Optional)
use_count	(Optional)
description	(Optional)
num_aces	(Optional)
ace_seq_num	(Optional)
ace_action	(Optional)
ace_type	(Optional)
ace_sip	(Optional)
ace_sip_len	(Optional)
ace_dip	(Optional)
ace_dip_len	(Optional)

Command Mode

/exec

show incompatibility-all system

show incompatibility-all { system <uri0> | nxos <uri1> } [ __readonly__ { [ TABLE_incompat_all <Str1> [ <Serv> ] [ <Cap> ] [ <Desc> ] [ <Req> ] [ <Enable> ] ] [ <Dynamic> ] } ]

Syntax Description


show	Show running system information
incompatibility-all	Show incompatible configurations for the entire system
system	show incompatibilities with an image
uri0	Enter image uri
nxos	show incompatibilities with an image
uri1	Enter image uri
__readonly__	(Optional)
TABLE_incompat_all	(Optional) Show incompatibility system table
Str1	(Optional)
Serv	(Optional)
Cap	(Optional)
Desc	(Optional)
Req	(Optional)
Enable	(Optional)
Dynamic	(Optional)

Command Mode

/exec

show incompatibility system

show incompatibility { system <uri0> | nxos <uri1> } [ __readonly__ { [ TABLE_incompat <Str1> [ <Serv> ] [ <Cap> ] [ <Desc> ] [ <Req> ] [ <Enable> ] ] [ <Dynamic> ] } ]

Syntax Description


show	Show running system information
incompatibility	Show incompatible configurations
system	show incompatibilities with an image
uri0	Enter image uri
nxos	show incompatibilities with an image
uri1	Enter image uri
__readonly__	(Optional)
TABLE_incompat	(Optional) Show incompatibility system table
Str1	(Optional)
Serv	(Optional)
Cap	(Optional)
Desc	(Optional)
Req	(Optional)
Enable	(Optional)
Dynamic	(Optional)

Command Mode

/exec

show install

show install { inactive | active [ brief ] | committed } [ __readonly__ { <curr_nxos_image> [ TABLE_smu_list <install_smu_id> + ] [ TABLE_package_list <package_id> ] [ TABLE_base_package_list <base_package_id> ] } ]

Syntax Description


show	Show running system information
install	Install related show commands
inactive	Inactive packages
active	Active packages
brief	(Optional) Brief
committed	Committed packages
__readonly__	(Optional)
curr_nxos_image	(Optional) NXOS image
TABLE_smu_list	(Optional)
install_smu_id	(Optional) install operation smu identifier
TABLE_package_list	(Optional)
package_id	(Optional) Package name
TABLE_base_package_list	(Optional)
base_package_id	(Optional) Base package name

Command Mode

/exec

show install all failed-standby

show install all failed-standby [ __readonly__ { [ TABLE_installFailStandby <Str1> ] } ]

Syntax Description


show	Show running system information
install	Show the software install impact between two images
all	Show install all information
failed-standby	show log from failed standby
__readonly__	(Optional)
TABLE_installFailStandby	(Optional) Install failed-standby table
Str1	(Optional)

Command Mode

/exec

show install all failure-reason

show install all failure-reason [ __readonly__ { [ TABLE_installFailReason <installFailReasonStr> ] } ]

Syntax Description


show	Show running system information
install	Show the software install impact between two images
all	show install all information
failure-reason	Show failure reason for the last install all
__readonly__	(Optional)
TABLE_installFailReason	(Optional) Install failure-reason table
installFailReasonStr	(Optional)

Command Mode

/exec

show install all impact

show install all impact [ nxos <uri> ] + [ non-disruptive ]

Syntax Description


show	Show running system information
install	Show the software install impact between two images
all	show install all information
impact	show impact of the install all command
nxos	(Optional) boot-variable name
uri	(Optional) Enter image uri
non-disruptive	(Optional) non-disruptive show install

Command Mode

/exec

show install all impact epld

show install all impact epld <uri1> [ __readonly__ [ { TABLE_compat <module> <type> <upgradable> <impact> <reason> } ] ]

Syntax Description


show	Show running system information
install	Show the software install status
all	show install all information
impact	show impact of the install all epld command
epld	Show EPLD install information
uri1	Local URI containing EPLD Image
__readonly__	(Optional)
TABLE_compat	(Optional)
module	(Optional)
type	(Optional)
upgradable	(Optional)
impact	(Optional)
reason	(Optional)

Command Mode

/exec

show install all status

Syntax Description


show	Show running system information
install	Show the software install impact between two images
all	show install all information
status	show status of the current or last install all

Command Mode

/exec

show install all time-stats

show install all time-stats [ detail | handshake ]

Syntax Description


show	Show running system information
install	Show the software install impact between two images
all	show install all information
time-stats	show overall time statistics of the last install all
detail	(Optional) show detailed time statistics of the last install all
handshake	(Optional) show handshake time statistics for sysmgr and lc processes of the last install all

Command Mode

/exec

show install epld status

show install epld status [ __readonly__ { <header_info> <entry_num> <module_num> <time> <status> <reason> <curr_ver> <old_ver> <epld_name> <epld_install_name> } ]

Syntax Description


show	Show running system information
install	Show the software install status
epld	Show EPLD install information
status	Show status of previous EPLD upgrades
__readonly__	(Optional)
header_info	(Optional)
entry_num	(Optional)
module_num	(Optional)
time	(Optional)
status	(Optional)
reason	(Optional)
curr_ver	(Optional)
old_ver	(Optional)
epld_name	(Optional)
epld_install_name	(Optional)

Command Mode

/exec

show install impact

show install impact <uri0>

Syntax Description


show	Show running system information
install	Show the software install impact between two images
impact	impact system_uri {active_system_uri/active_kickstart_uri}
uri0	Enter system URI

Command Mode

/exec

show install impact

show install impact <uri0> <uri1>

Syntax Description


show	Show running system information
install	Show the software install impact between two images
impact	impact system_uri {active_system_uri/active_kickstart_uri}
uri0	Enter system URI
uri1	Enter active URI

Command Mode

/exec

show install impact detail

show install impact <uri0> detail

Syntax Description


show	Show running system information
install	Show the software install impact between two images
impact	impact system_uri {active_system_uri/active_kickstart_uri}
uri0	Enter system URI
detail	Show detailed install impact of given system image

Command Mode

/exec

show install log

show install log { [ <id> | from <id1> ] [ detail ] [ reverse ] | [ last ] } [ __readonly__ { current_time <curr_time> [ TABLE_show_log_output <install_id> <install_log_entry> + ] } ]

Syntax Description


show	Show running system information
install	Install related show commands
log	log
id	(Optional) Install Identifies
from	(Optional) Starting at this install identifier
id1	(Optional) Install Identifier
detail	(Optional) Detailed information including impacted processes
reverse	(Optional) Displays the logs in reverse order
last	(Optional) Display the logs for last install operation
__readonly__	(Optional)
current_time	(Optional) current time
curr_time	(Optional) current time
TABLE_show_log_output	(Optional)
install_id	(Optional) install operation id
install_log_entry	(Optional) install log entry

Command Mode

/exec

show install mode

show install mode [ __readonly__ { <install_mode> <image_type> } ]

Syntax Description


show	Show running system information
install	Install related show commands
mode	Display mode and type of booted image
__readonly__	(Optional)
install_mode	(Optional) install mode
image_type	(Optional) image type

Command Mode

/exec

show install packages

show install packages [ __readonly__ { <curr_nxos_image> [ TABLE_package_list <package_name> <version> <state> <signature> ] } ]

Syntax Description


show	Show running system information
install	Install related show commands
packages	All packages
__readonly__	(Optional)
curr_nxos_image	(Optional) NXOS image
TABLE_package_list	(Optional)
package_name	(Optional) Package name
version	(Optional) Package version
state	(Optional) package state
signature	(Optional) Signature

Command Mode

/exec

show install patches

show install patches [ __readonly__ { <curr_nxos_image> [ TABLE_smu_list <install_smu_id> <install_smu_state> [ TABLE_module_list <install_modno> <install_mod_smu_state> ] ] } ]

Syntax Description


show	Show running system information
install	Install related show commands
patches	All Patches
__readonly__	(Optional)
TABLE_smu_list	(Optional)
curr_nxos_image	(Optional) NXOS image
install_smu_id	(Optional) install operation smu identifier
install_smu_state	(Optional) install operation smu state
TABLE_module_list	(Optional)
install_modno	(Optional) install operation module number
install_mod_smu_state	(Optional) install operation module state

Command Mode

/exec

show interface

show interface <ifmgmt> [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn_desc> ] [ <state_rsn> ] [ <eth_rsn_fac> ] [ <eth_rsn_code> ] [ <share_state> ] [ <eth_bundle> ] [ <eth_dce_mode> ] [ <vpc_status> ] [ <eth_hw_desc> ] [ <eth_hw_addr> ] [ <eth_bia_addr> ] [ <desc> ] [ <eth_ip_addr> ] [ <eth_ip_mask> ] [ <eth_ip_prefix> ] [ <eth_mtu> ] [ <eth_bw> ] [ <eth_encap_vlan> ] [ <encapsulation> ] [ <eth_dly> ] [ <eth_reliability> ] [ <eth_txload> ] [ <eth_rxload> ] [ <eth_loopback> ] [ <eth_keepalive> ] [ <eth_duplex> ] [ <eth_speed> ] [ <eth_mode> ] [ <eth_ratemode> ] [ <eth_autoneg> ] [ <eth_beacon> ] [ <eth_media> ] [ <eth_in_flowctrl> ] [ <eth_out_flowctrl> ] [ <eth_mdix> ] [ <eth_swt_monitor> ] [ <eth_ethertype> ] [ <eth_members> ] [ <eth_clk_mode> ] [ <eth_arp_type> ] [ <eth_arp_timeout> ] [ <eth_last_in> ] [ <eth_last_out> ] [ <eth_out_hang> ] [ <eth_clear_counters> ] [ <eth_link_flapped> ] [ <eth_inq_size> ] [ <eth_inq_max> ] [ <eth_inq_drops> ] [ <eth_inq_flush> ] [ <eth_out_drop> ] [ <eth_q_strategy> ] [ <eth_outq_size> ] [ <eth_outq_max> ] [ <eth_reset_cntr> ] [ <mgmt_hw_desc> ] [ <mgmt_hw_addr> ] [ <mgmt_ip_addr> ] [ <mgmt_ip_mask> ] [ <mgmt_mtu> ] [ <mgmt_speed> ] [ <mgmt_duplex> ] [ <vdc_lvl_in_avg_bits> ] [ <vdc_lvl_in_avg_pkts> ] [ <vdc_lvl_out_avg_bits> ] [ <vdc_lvl_out_avg_pkts> ] [ <vdc_lvl_in_pkts> ] [ <vdc_lvl_in_ucast> ] [ <vdc_lvl_in_mcast> ] [ <vdc_lvl_in_bcast> ] [ <vdc_lvl_in_bytes> ] [ <vdc_lvl_in_bps> ] [ <vdc_lvl_in_pps> ] [ <vdc_lvl_out_pkts> ] [ <vdc_lvl_out_ucast> ] [ <vdc_lvl_out_mcast> ] [ <vdc_lvl_out_bcast> ] [ <vdc_lvl_out_bytes> ] [ <vdc_lvl_out_bps> ] [ <vdc_lvl_out_pps> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifmgmt	Enter interface type and number in module/slot format
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
state_rsn_desc	(Optional) Interface state reason detailed
state_rsn	(Optional) Interface state reason
eth_rsn_fac	(Optional) State reason facility
eth_rsn_code	(Optional) State reason code
share_state	(Optional) Interface ownership
eth_bundle	(Optional) Belongs to bundle
eth_dce_mode	(Optional) DCE mode description
vpc_status	(Optional) VPC status
eth_hw_desc	(Optional) HW description
eth_hw_addr	(Optional) HW address
eth_bia_addr	(Optional) bia address
desc	(Optional) Interface description
eth_ip_addr	(Optional) IP Address
eth_ip_mask	(Optional) IP address mask
eth_ip_prefix	(Optional) IP address prefix
eth_mtu	(Optional) MTU
eth_bw	(Optional) Bandwidth
eth_encap_vlan	(Optional) Encapsulation Vlan
encapsulation	(Optional) Encapsulation
eth_dly	(Optional) Delay
eth_reliability	(Optional) Reliability
eth_txload	(Optional) Tx load
eth_rxload	(Optional) Rx load
eth_loopback	(Optional) Loopback
eth_keepalive	(Optional) Keepalive
eth_duplex	(Optional) Duplex
eth_speed	(Optional) Speed
eth_mode	(Optional) Port mode
eth_ratemode	(Optional) Rate mode
eth_autoneg	(Optional) Autonegotiation
eth_beacon	(Optional) Beacon
eth_media	(Optional) Media type
eth_in_flowctrl	(Optional) Input flowcontrol
eth_out_flowctrl	(Optional) Output flowcontrol
eth_mdix	(Optional) Mdix
eth_swt_monitor	(Optional) Switchport Monitor
eth_ethertype	(Optional) EtherType
eth_members	(Optional) Members in this channel
eth_clk_mode	(Optional) Clock mode
eth_arp_type	(Optional) ARP type
eth_arp_timeout	(Optional) ARP timeout
eth_last_in	(Optional) Last input
eth_last_out	(Optional) Last output
eth_out_hang	(Optional) Last output hang
eth_clear_counters	(Optional) Last clearing of show interface counters
eth_link_flapped	(Optional) Last link flapped
eth_inq_size	(Optional) Input queue size
eth_inq_max	(Optional) Input queue max
eth_inq_drops	(Optional) Input queue drops
eth_inq_flush	(Optional) Input queue flushes
eth_out_drop	(Optional) Output drops
eth_q_strategy	(Optional) Queueing strategy
eth_outq_size	(Optional) Output queue size
eth_outq_max	(Optional) Output queue max
eth_reset_cntr	(Optional) Interface resets
mgmt_hw_desc	(Optional) HW description
mgmt_hw_addr	(Optional) HW address
mgmt_ip_addr	(Optional) IP address
mgmt_ip_mask	(Optional) IP address mask
mgmt_mtu	(Optional) MTU
mgmt_speed	(Optional) Speed
mgmt_duplex	(Optional) Duplex
vdc_lvl_in_avg_bits	(Optional) VDC level average input bits
vdc_lvl_in_avg_pkts	(Optional) VDC level average input packets
vdc_lvl_out_avg_bits	(Optional) VDC level average output bits
vdc_lvl_out_avg_pkts	(Optional) VDC level average output packets
vdc_lvl_in_pkts	(Optional) VDC level input packets
vdc_lvl_in_ucast	(Optional) VDC level input unicast packets
vdc_lvl_in_mcast	(Optional) VDC level input multicast packets
vdc_lvl_in_bcast	(Optional) VDC level input broadcast packets
vdc_lvl_in_bytes	(Optional) VDC level input bytes
vdc_lvl_in_bps	(Optional) VDC level input bytes per second
vdc_lvl_in_pps	(Optional) VDC level input packets per second
vdc_lvl_out_pkts	(Optional) VDC level output packets
vdc_lvl_out_ucast	(Optional) VDC level output unicast packets
vdc_lvl_out_mcast	(Optional) VDC level output multicast packets
vdc_lvl_out_bcast	(Optional) VDC level output broadcast packets
vdc_lvl_out_bytes	(Optional) VDC level output bytes
vdc_lvl_out_bps	(Optional) VDC level output bytes per second
vdc_lvl_out_pps	(Optional) VDC level output packets per second

Command Mode

/exec

show interface

show interface <ifid_brief1> [ brief ] [ __readonly__ [ { TABLE_interface_vfc [ <interface_vfc> ] [ <vsan_brief> ] [ <oper_port_state> ] [ <port_state> ] [ <bound_interface> ] [ <port_desc> ] [ <port_des> ] [ <mgmt_hw_desc1> ] [ <mgmt_hw_addr1> ] [ <port_name> ] [ <hardware> ] [ <sfp> ] [ <port_wwn> ] [ <peer_port_wwn> ] [ <admin_mode> ] [ <admin_trunk_mode> ] [ <snmp_trap> ] [ <status> ] [ <state_rsn1> ] [ <fcot_info> ] [ <bind_info> ] [ <bind_mac> ] [ <bind_type> ] [ <port_mode> ] [ <fcid> ] [ <cfg_port_vsan> ] [ <vsan> ] [ <port_rate_mode> ] [ <oper_speed> ] [ <admin_speed> ] [ <port_channel> ] [ <ip_addr1> ] [ <oper_txbbcredit> ] [ <oper_rxbbcredit> ] [ <port_bb_scn> ] [ <admin_rxbufsize> ] [ <admin_port_encap> ] [ <admin_beacon_mode> ] [ <admin_fec_state> ] [ <oper_fec_state> ] [ <bundle_if_index> ] [ <trkd_if_index> ] [ <trk_cfg_vsans> ] [ <trkd_port_state> ] [ <num_ports> ] [ TABLE_trk_intf [ <trk_intf> ] ] [ <info_type_num> ] [ <info_model_num> ] [ <info_manufacturer> ] [ <info_port_id> ] [ <active_vsan> ] [ <trunk_vsan_up> ] [ <trunk_vsan_isolated> ] [ <trunk_vsan_initializing> ] [ <in_bps> ] [ <in_byps> ] [ <in_fps> ] [ <out_bps> ] [ <out_byps> ] [ <out_fps> ] [ <total_in_frames> ] [ <total_in_bytes> ] [ <total_in_discards> ] [ <total_in_errors> ] [ <invalid_crc> ] [ <unknown_class_frames> ] [ <frames_too_long> ] [ <frames_too_short> ] [ <total_out_frames> ] [ <total_out_bytes> ] [ <total_out_discards> ] [ <total_out_errors> ] [ <in_ols> ] [ <in_lrr> ] [ <in_nos> ] [ <in_loop_inits> ] [ <out_ols> ] [ <out_lrr> ] [ <out_nos> ] [ <out_loop_inits> ] [ <rx_b2b_perf_buff> ] [ <rx_b2b_credit> ] [ <tx_b2b_credit> ] [ <tx_b2b_low_pri_cre> ] [ <fcoe_in_pkts> ] [ <fcoe_in_octets> ] [ <fcoe_out_pkts> ] [ <fcoe_out_octets> ] [ TABLE_members [ <port_channel_member> ] ] [ <interface_last_changed> ] [ <time_last_cleared> ] } ] [ { TABLE_interface_brief_vfc [ <interface_vfc> ] [ <vsan_brief> ] [ <admin_mode> ] [ <admin_trunk_mode> ] [ <status> ] [ <fcot_info> ] [ <bind_info> ] [ <bind_type> ] [ <bind_mac> ] [ <port_rate_mode> ] [ <oper_speed> ] [ <port_channel> ] [ <ip_addr> ] } ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid_brief1	Enter interface type and number in module/slot format
brief	(Optional) Show brief info of interface
__readonly__	(Optional) Read Only
interface_vfc	(Optional) Interface index
TABLE_interface_vfc	(Optional) show interface
vsan_brief	(Optional) vsan for brief
oper_port_state	(Optional) oper port state
port_state	(Optional) port state
bound_interface	(Optional) bound interface
port_desc	(Optional) port description
port_des	(Optional) port description
mgmt_hw_desc1	(Optional) HW description
mgmt_hw_addr1	(Optional) HW address
port_name	(Optional) port description
hardware	(Optional) Hardware is
sfp	(Optional) sfp
port_wwn	(Optional) port wwn
peer_port_wwn	(Optional) peer port wwn
admin_mode	(Optional) admin mode
admin_trunk_mode	(Optional) admin trunk mode
snmp_trap	(Optional) snmp trap
status	(Optional) Status
state_rsn1	(Optional) state reason
fcot_info	(Optional) fcot info
bind_info	(Optional) bind interface
bind_mac	(Optional) bind mac
bind_type	(Optional) bind type
port_mode	(Optional) port mode
fcid	(Optional) fcid
cfg_port_vsan	(Optional) config port vsan
vsan	(Optional) vsan for brief
port_rate_mode	(Optional) operation port rate mode
oper_speed	(Optional) speed
admin_speed	(Optional) admin speed
port_channel	(Optional) port channel
ip_addr1	(Optional) Ip address
oper_txbbcredit	(Optional) oper tx bbcredit
oper_rxbbcredit	(Optional) oper rx bbcredit
port_bb_scn	(Optional) port bb scn
admin_rxbufsize	(Optional) admin rx bufsize
admin_port_encap	(Optional) admin port encap
admin_beacon_mode	(Optional) admin beacon mode
admin_fec_state	(Optional) admin fec state
oper_fec_state	(Optional) oper fec state
bundle_if_index	(Optional) bundle if index
trkd_if_index	(Optional) Trunk interfaces
trk_cfg_vsans	(Optional) Trunk vsans
trkd_port_state	(Optional) trunk port state
num_ports	(Optional) number of ports
TABLE_trk_intf	(Optional) trunk interfaces
trk_intf	(Optional) track interface
info_type_num	(Optional) info type num
info_model_num	(Optional) info model num
info_manufacturer	(Optional) info manufacturer
info_port_id	(Optional) info port id
active_vsan	(Optional) allowed and active vsan
trunk_vsan_up	(Optional) trunk vsan up
trunk_vsan_isolated	(Optional) trunk vsan isolated
trunk_vsan_initializing	(Optional) trunk vsan initializing
in_bps	(Optional) input bits/sec
in_byps	(Optional) input bytes/sec
in_fps	(Optional) input frames/sec
out_bps	(Optional) output bits/sec
out_byps	(Optional) output bytes/sec
out_fps	(Optional) output frames/sec
total_in_frames	(Optional) total in frames
total_in_bytes	(Optional) total in bytes
total_in_discards	(Optional) total in discards
total_in_errors	(Optional) total in errors
invalid_crc	(Optional) invalid crc
unknown_class_frames	(Optional) unknown class frames
frames_too_long	(Optional) frames too long
frames_too_short	(Optional) frames too short
total_out_frames	(Optional) total out frames
total_out_bytes	(Optional) total out bytes
total_out_discards	(Optional) total out discards
total_out_errors	(Optional) total out errors
in_ols	(Optional) input OLS
in_lrr	(Optional) input LRR
in_nos	(Optional) input NOS
in_loop_inits	(Optional) input loop inits
out_ols	(Optional) output OLS
out_lrr	(Optional) ouput LRR
out_nos	(Optional) output NOS
out_loop_inits	(Optional) output loop inits
rx_b2b_perf_buff	(Optional) rx b2b performance buff
rx_b2b_credit	(Optional) rx b2b credit
tx_b2b_credit	(Optional) tx b2b credit
tx_b2b_low_pri_cre	(Optional) tx b2b low pri credit
fcoe_in_pkts	(Optional) fcoe in pkts
fcoe_in_octets	(Optional) fcoe in octets
fcoe_out_pkts	(Optional) fcoe out pkts
fcoe_out_octets	(Optional) fcoe out octets
TABLE_members	(Optional) table for port-channel member interface
port_channel_member	(Optional) port-channel member interface
interface_last_changed	(Optional) interface last changed
time_last_cleared	(Optional) counters last cleared
TABLE_interface_brief_vfc	(Optional) show interface brief table
interface_vfc	(Optional) Interface index
vsan_brief	(Optional) vsan brief
admin_mode	(Optional) admin mode
admin_trunk_mode	(Optional) admin trunk mode
status	(Optional) status
fcot_info	(Optional) fcot info
bind_info	(Optional) bind interface
bind_type	(Optional) bind type
bind_mac	(Optional) bind mac address
port_rate_mode	(Optional) rate mode
oper_speed	(Optional) speed
port_channel	(Optional) port channel number
ip_addr	(Optional) IP address

Command Mode

/exec

show interface

show interface <ifid_brief2> [ brief ] [ __readonly__ [ { TABLE_interface_fc [ <interface_vfc> ] [ <vsan_brief> ] [ <oper_port_state> ] [ <port_state> ] [ <bound_interface> ] [ <port_desc> ] [ <port_des> ] [ <mgmt_hw_desc1> ] [ <mgmt_hw_addr1> ] [ <port_name> ] [ <hardware> ] [ <sfp> ] [ <port_wwn> ] [ <peer_port_wwn> ] [ <admin_mode> ] [ <admin_trunk_mode> ] [ <snmp_trap> ] [ <status> ] [ <state_rsn1> ] [ <fcot_info> ] [ <bind_info> ] [ <bind_mac> ] [ <bind_type> ] [ <port_mode> ] [ <fcid> ] [ <cfg_port_vsan> ] [ <vsan> ] [ <port_rate_mode> ] [ <oper_speed> ] [ <admin_speed> ] [ <port_channel> ] [ <ip_addr1> ] [ <oper_txbbcredit> ] [ <oper_rxbbcredit> ] [ <port_bb_scn> ] [ <admin_rxbufsize> ] [ <admin_port_encap> ] [ <admin_beacon_mode> ] [ <admin_fec_state> ] [ <oper_fec_state> ] [ <bundle_if_index> ] [ <trkd_if_index> ] [ <trk_cfg_vsans> ] [ <trkd_port_state> ] [ <num_ports> ] [ TABLE_trk_intf [ <trk_intf> ] ] [ <info_type_num> ] [ <info_model_num> ] [ <info_manufacturer> ] [ <info_port_id> ] [ <active_vsan> ] [ <trunk_vsan_up> ] [ <trunk_vsan_isolated> ] [ <trunk_vsan_initializing> ] [ <in_bps> ] [ <in_byps> ] [ <in_fps> ] [ <out_bps> ] [ <out_byps> ] [ <out_fps> ] [ <total_in_frames> ] [ <total_in_bytes> ] [ <total_in_discards> ] [ <total_in_errors> ] [ <invalid_crc> ] [ <unknown_class_frames> ] [ <frames_too_long> ] [ <frames_too_short> ] [ <total_out_frames> ] [ <total_out_bytes> ] [ <total_out_discards> ] [ <total_out_errors> ] [ <in_ols> ] [ <in_lrr> ] [ <in_nos> ] [ <in_loop_inits> ] [ <out_ols> ] [ <out_lrr> ] [ <out_nos> ] [ <out_loop_inits> ] [ <rx_b2b_perf_buff> ] [ <rx_b2b_credit> ] [ <tx_b2b_credit> ] [ <tx_b2b_low_pri_cre> ] [ <fcoe_in_pkts> ] [ <fcoe_in_octets> ] [ <fcoe_out_pkts> ] [ <fcoe_out_octets> ] [ TABLE_members [ <port_channel_member> ] ] [ <interface_last_changed> ] [ <time_last_cleared> ] } ] [ { TABLE_interface_brief_fc [ <interface_fc> ] [ <vsan_brief> ] [ <admin_mode> ] [ <admin_trunk_mode> ] [ <status> ] [ <fcot_info> ] [ <bind_info> ] [ <bind_type> ] [ <bind_mac> ] [ <port_rate_mode> ] [ <oper_speed> ] [ <port_channel> ] [ <ip_addr> ] } ] [ { TABLE_interface_brief_san_pc [ <interface_san> ] [ <vsan_brief> ] [ <admin_trunk_mode> ] [ <status> ] [ <port_rate_mode> ] [ <oper_speed> ] [ <ip_addr> ] } ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid_brief2	Enter interface type and number in module/slot format
brief	(Optional) Show brief info of interface
__readonly__	(Optional) Read Only
interface_vfc	(Optional) Interface index
TABLE_interface_fc	(Optional) show interface
vsan_brief	(Optional) vsan for brief
oper_port_state	(Optional) oper port state
port_state	(Optional) port state
bound_interface	(Optional) bound interface
port_desc	(Optional) port description
port_des	(Optional) port description
mgmt_hw_desc1	(Optional) HW description
mgmt_hw_addr1	(Optional) HW address
port_name	(Optional) port description
hardware	(Optional) Hardware is
sfp	(Optional) sfp
port_wwn	(Optional) port wwn
peer_port_wwn	(Optional) peer port wwn
admin_mode	(Optional) admin mode
admin_trunk_mode	(Optional) admin trunk mode
snmp_trap	(Optional) snmp trap
status	(Optional) Status
state_rsn1	(Optional) state reason
fcot_info	(Optional) fcot info
bind_info	(Optional) bind interface
bind_mac	(Optional) bind mac
bind_type	(Optional) bind type
port_mode	(Optional) port mode
fcid	(Optional) fcid
cfg_port_vsan	(Optional) config port vsan
vsan	(Optional) vsan for brief
port_rate_mode	(Optional) operation port rate mode
oper_speed	(Optional) speed
admin_speed	(Optional) admin speed
port_channel	(Optional) port channel
ip_addr1	(Optional) Ip address
oper_txbbcredit	(Optional) oper tx bbcredit
oper_rxbbcredit	(Optional) oper rx bbcredit
port_bb_scn	(Optional) port bb scn
admin_rxbufsize	(Optional) admin rx bufsize
admin_port_encap	(Optional) admin port encap
admin_beacon_mode	(Optional) admin beacon mode
admin_fec_state	(Optional) admin fec state
oper_fec_state	(Optional) oper fec state
bundle_if_index	(Optional) bundle if index
trkd_if_index	(Optional) Trunk interfaces
trk_cfg_vsans	(Optional) Trunk vsans
trkd_port_state	(Optional) trunk port state
num_ports	(Optional) number of ports
TABLE_trk_intf	(Optional) trunk interfaces
trk_intf	(Optional) track interface
info_type_num	(Optional) info type num
info_model_num	(Optional) info model num
info_manufacturer	(Optional) info manufacturer
info_port_id	(Optional) info port id
active_vsan	(Optional) allowed and active vsan
trunk_vsan_up	(Optional) trunk vsan up
trunk_vsan_isolated	(Optional) trunk vsan isolated
trunk_vsan_initializing	(Optional) trunk vsan initializing
in_bps	(Optional) input bits/sec
in_byps	(Optional) input bytes/sec
in_fps	(Optional) input frames/sec
out_bps	(Optional) output bits/sec
out_byps	(Optional) output bytes/sec
out_fps	(Optional) output frames/sec
total_in_frames	(Optional) total in frames
total_in_bytes	(Optional) total in bytes
total_in_discards	(Optional) total in discards
total_in_errors	(Optional) total in errors
invalid_crc	(Optional) invalid crc
unknown_class_frames	(Optional) unknown class frames
frames_too_long	(Optional) frames too long
frames_too_short	(Optional) frames too short
total_out_frames	(Optional) total out frames
total_out_bytes	(Optional) total out bytes
total_out_discards	(Optional) total out discards
total_out_errors	(Optional) total out errors
in_ols	(Optional) input OLS
in_lrr	(Optional) input LRR
in_nos	(Optional) input NOS
in_loop_inits	(Optional) input loop inits
out_ols	(Optional) output OLS
out_lrr	(Optional) ouput LRR
out_nos	(Optional) output NOS
out_loop_inits	(Optional) output loop inits
rx_b2b_perf_buff	(Optional) rx b2b performance buff
rx_b2b_credit	(Optional) rx b2b credit
tx_b2b_credit	(Optional) tx b2b credit
tx_b2b_low_pri_cre	(Optional) tx b2b low pri credit
fcoe_in_pkts	(Optional) fcoe in pkts
fcoe_in_octets	(Optional) fcoe in octets
fcoe_out_pkts	(Optional) fcoe out pkts
fcoe_out_octets	(Optional) fcoe out octets
TABLE_members	(Optional) table for port-channel member interface
port_channel_member	(Optional) port-channel member interface
interface_last_changed	(Optional) interface last changed
time_last_cleared	(Optional) counters last cleared
TABLE_interface_brief_fc	(Optional) show interface brief table
interface_fc	(Optional) Interface index
ip_addr	(Optional) IP address
vsan_brief	(Optional) vsan brief
admin_mode	(Optional) admin mode
admin_trunk_mode	(Optional) admin trunk mode
status	(Optional) status
fcot_info	(Optional) fcot info
bind_info	(Optional) bind interface
bind_type	(Optional) bind type
bind_mac	(Optional) bind mac address
port_rate_mode	(Optional) rate mode
oper_speed	(Optional) speed
port_channel	(Optional) port channel number
TABLE_interface_brief_san_pc	(Optional) show interface brief for san-po
interface_san	(Optional) san_po interface
vsan_brief	(Optional) vsan brief
admin_trunk_mode	(Optional) admin trunk mode
status	(Optional) status
port_rate_mode	(Optional) rate mode
oper_speed	(Optional) speed
ip_addr	(Optional) IP address

Command Mode

/exec

show interface

show interface <ifid> [ quick ] [ __readonly__ TABLE_interface <interface> [ <desc> ] [ [ <svi_if_index> ] [ <svi_admin_state> ] [ <oper_state> ] [ <svi_rsn_desc> ] [ <svi_line_proto> ] [ <svi_hw> ] [ <svi_mac> ] [ <svi_desc> ] [ <svi_ip_addr> ] [ <svi_ip_mask> ] [ <svi_mtu> ] [ <svi_bw> ] [ <svi_delay> ] [ <vlan_id> ] [ <type> ] ] [ [ <svi_tx_load> ] [ <svi_rx_load> ] ] [ [ <svi_carrier_delay_sec> ] [ <svi_carrier_delay_msec> ] [ <svi_arp_type> ] [ <svi_arp_timeout> ] ] [ [ <svi_time_last_cleared> ] ] [ { [ TABLE_sec_vlan ] [ <sec_vlan> ] [ <sec_vlan_type> ] } ] [ [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_inrate1_summary_bits> ] [ <eth_inrate1_summary_pkts> ] [ <eth_outrate1_summary_bits> ] [ <eth_outrate1_summary_pkts> ] [ <eth_load_interval2_rx> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_load_interval2_tx> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_inrate2_summary_bits> ] [ <eth_inrate2_summary_pkts> ] [ <eth_outrate2_summary_bits> ] [ <eth_outrate2_summary_pkts> ] [ <eth_load_interval3_rx> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_load_interval3_tx> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_inrate3_summary_bits> ] [ <eth_inrate3_summary_pkts> ] [ <eth_outrate3_summary_bits> ] [ <eth_outrate3_summary_pkts> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_l3avg2_inbytes> ] [ <eth_l3avg2_inpkts> ] [ <eth_l3avg2_outbytes> ] [ <eth_l3avg2_outpkts> ] [ <eth_l3avg3_inbytes> ] [ <eth_l3avg3_inpkts> ] [ <eth_l3avg3_outbytes> ] [ <eth_l3avg3_outpkts> ] [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_nobuf> ] [ <eth_inbcast> ] [ <eth_inmcast> ] [ <eth_inucast> ] [ <eth_ingiants> ] [ <eth_ipmcast> ] [ <eth_inhw_switched> ] [ <eth_insw_switched> ] [ <eth_runts> ] [ <eth_storm_supp> ] [ <eth_throtles> ] [ <eth_inerr> ] [ <eth_crc> ] [ <eth_ecc> ] [ <eth_frame> ] [ <eth_overrun> ] [ <eth_ignored> ] [ <eth_watchdog> ] [ <eth_outbcast> ] [ <eth_outmcast> ] [ <eth_outucast> ] [ <eth_outgiants> ] [ <eth_inpause> ] [ <eth_dribble> ] [ <eth_in_ifdown_drops> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_underrun> ] [ <eth_outhw_switched> ] [ <eth_outsw_switched> ] [ <eth_outerr> ] [ <eth_coll> ] [ <eth_resets> ] [ <eth_babbles> ] [ <eth_latecoll> ] [ <eth_deferred> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_outpause> ] [ <eth_buffail> ] [ <eth_bufswapped> ] [ <eth_arpdrops> ] [ <eth_out_ifdown_drops> ] [ <eth_single_coll> ] [ <eth_multi_coll> ] [ <eth_excess_coll> ] [ <eth_jabbers> ] [ <eth_shortframe> ] [ <eth_indiscard> ] [ <eth_bad_encap> ] [ <eth_outcrc> ] [ <eth_symbol> ] [ <eth_out_drops> ] [ <eth_sqetest> ] [ <eth_inb64> ] [ <eth_inb65_127> ] [ <eth_inb128_255> ] [ <eth_inb256_511> ] [ <eth_inb512_1023> ] [ <eth_inb1024_1518> ] [ <eth_inb1519_1548> ] [ <eth_intrunk> ] [ <eth_outb64> ] [ <eth_outb65_127> ] [ <eth_outb128_255> ] [ <eth_outb256_511> ] [ <eth_outb512_1023> ] [ <eth_outb1024_1518> ] [ <eth_outb1519_1548> ] [ <eth_outtrunk> ] [ <eth_bpdu_outlost> ] [ <eth_cos0_outlost> ] [ <eth_cos1_outlost> ] [ <eth_cos2_outlost> ] [ <eth_cos3_outlost> ] [ <eth_cos4_outlost> ] [ <eth_cos5_outlost> ] [ <eth_cos6_outlost> ] [ <eth_cos7_outlost> ] [ <eth_fcoe_in_pkts> ] [ <eth_fcoe_in_octets> ] [ <eth_fcoe_out_pkts> ] [ <eth_fcoe_out_octets> ] [ <eth_nfcoe_in_pkts> ] [ <eth_nfcoe_in_octets> ] [ <eth_nfcoe_out_pkts> ] [ <eth_nfcoe_out_octets> ] [ <eth_eee_atx_lpi_msec> ] [ <eth_eee_arcv_lpi_msec> ] [ <eth_eee_atx_lpi_transitions> ] [ <eth_eee_arcv_lpi_transitions> ] [ <eth_phy_ber_count> ] [ <eth_phy_errblks_count> ] ] [ [ <svi_routed_pkts_in> ] [ <svi_routed_bytes_in> ] [ <svi_routed_pkts_out> ] [ <svi_routed_bytes_out> ] [ <svi_ucast_pkts_in> ] [ <svi_ucast_bytes_in> ] [ <svi_mcast_pkts_in> ] [ <svi_mcast_bytes_in> ] [ <svi_ucast_pkts_out> ] [ <svi_ucast_bytes_out> ] [ <svi_mcast_pkts_out> ] [ <svi_mcast_bytes_out> ] [ <svi_ipv4_ucast_pkts_in> ] [ <svi_ipv4_ucast_bytes_in> ] [ <svi_ipv4_ucast_pkts_out> ] [ <svi_ipv4_ucast_bytes_out> ] [ <svi_ipv4_mcast_pkts_in> ] [ <svi_ipv4_mcast_bytes_in> ] [ <svi_ipv4_mcast_pkts_out> ] [ <svi_ipv4_mcast_bytes_out> ] [ <svi_ipv6_ucast_pkts_in> ] [ <svi_ipv6_ucast_bytes_in> ] [ <svi_ipv6_ucast_pkts_out> ] [ <svi_ipv6_ucast_bytes_out> ] [ <svi_ipv6_mcast_pkts_in> ] [ <svi_ipv6_mcast_bytes_in> ] [ <svi_ipv6_mcast_pkts_out> ] [ <svi_ipv6_mcast_bytes_out> ] [ <svi_average_input_bits> ] [ <svi_average_input_packets> ] [ <svi_average_output_bits> ] [ <svi_average_output_packets> ] [ <svi_rate_in_mins> ] ] [ [ <svi_reliability> ] ] [ <switchport> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid	Enter interface type and number in module/slot format
quick	(Optional) Show info of interface skipping stats
__readonly__	(Optional) Read Only
TABLE_interface	(Optional) show interface
interface	(Optional) Interface index
desc	(Optional) Interface description
svi_if_index	(Optional) Interface
svi_admin_state	(Optional)
oper_state	(Optional)
svi_rsn_desc	(Optional) Interface state reason detailed
svi_line_proto	(Optional)
svi_hw	(Optional) Hardware
svi_mac	(Optional) Address
svi_desc	(Optional) Interface Description
svi_ip_addr	(Optional) IP Address
svi_ip_mask	(Optional) IP address mask
svi_mtu	(Optional) MTU size in bytes
svi_bw	(Optional) Bandwidth in kilobits
svi_delay	(Optional) Throughput delay (tens of microseconds)
vlan_id	(Optional) Vlan
type	(Optional) type
svi_tx_load	(Optional) Tx Load
svi_rx_load	(Optional) Rx Load
svi_carrier_delay_sec	(Optional) carrier delay value in seconds
svi_carrier_delay_msec	(Optional) carrier delay value in milli-seconds
svi_arp_type	(Optional) ARP type
svi_arp_timeout	(Optional) ARP timeout value
svi_time_last_cleared	(Optional) Time last cleared
TABLE_sec_vlan	(Optional) secondary vlans
sec_vlan	(Optional) vlan id
sec_vlan_type	(Optional) secondary vlan type
eth_load_interval1_rx	(Optional) interval 1 timer value in sec
eth_inrate1_bits	(Optional) interval 1 input rate bits/sec
eth_inrate1_pkts	(Optional) interval 1 input rate pkts/sec
eth_load_interval1_tx	(Optional) interval 1 timer value in sec
eth_outrate1_bits	(Optional) interval 1 output rate bits/sec
eth_outrate1_pkts	(Optional) interval 1 output rate pkts/sec
eth_inrate1_summary_bits	(Optional) interval 1 input rate bit summary
eth_inrate1_summary_pkts	(Optional) interval 1 input rate pkt summary
eth_outrate1_summary_bits	(Optional) interval 1 output rate bit summary
eth_outrate1_summary_pkts	(Optional) interval 1 output rate pkt summary
eth_load_interval2_rx	(Optional) interval 2 timer value in sec
eth_inrate2_bits	(Optional) interval 2 input rate bits/sec
eth_inrate2_pkts	(Optional) interval 2 input rate pkts/sec
eth_load_interval2_tx	(Optional) interval 2 timer value in sec
eth_outrate2_bits	(Optional) interval 2 output rate bits/sec
eth_outrate2_pkts	(Optional) interval 2 output rate pkts/sec
eth_inrate2_summary_bits	(Optional) interval 2 input rate bit summary
eth_inrate2_summary_pkts	(Optional) interval 2 input rate pkt summary
eth_outrate2_summary_bits	(Optional) interval 2 output rate bit summary
eth_outrate2_summary_pkts	(Optional) interval 2 output rate pkt summary
eth_load_interval3_rx	(Optional) interval 3 timer value in sec
eth_inrate3_bits	(Optional) interval 3 input rate bits/sec
eth_inrate3_pkts	(Optional) interval 3 input rate pkts/sec
eth_load_interval3_tx	(Optional) interval 3 timer value in sec
eth_outrate3_bits	(Optional) interval 3 output rate bits/sec
eth_outrate3_pkts	(Optional) interval 3 output rate pkts/sec
eth_inrate3_summary_bits	(Optional) interval 3 input rate bit summary
eth_inrate3_summary_pkts	(Optional) interval 3 input rate pkt summary
eth_outrate3_summary_bits	(Optional) interval 3 output rate bit summary
eth_outrate3_summary_pkts	(Optional) interval 3 output rate pkt summary
eth_l2_ucastpkts	(Optional) L2 switched ucast pkts
eth_l2_ucastbytes	(Optional) L2 switched ucast bytes
eth_l2_mcastpkts	(Optional) L2 switched mcast pkts
eth_l2_mcastbytes	(Optional) L2 switched mcast bytes
eth_l2_bcastpkts	(Optional) L2 switched bcast pkts
eth_l2_bcastbytes	(Optional) L2 switched bcast bytes
eth_l3in_ucastpkts	(Optional) IPv4 L3 in switched ucast pkts
eth_l3in_ucastbytes	(Optional) IPv4 L3 in switched ucast bytes
eth_l3in_mcastpkts	(Optional) IPv4 L3 in switched mcast pkts
eth_l3in_mcastbytes	(Optional) IPv4 L3 in switched mcast bytes
eth_l3in_bcastpkts	(Optional) L3 in switched bcast pkts
eth_l3in_bcastbytes	(Optional) L3 in switched bcast bytes
eth_l3out_ucastpkts	(Optional) IPv4 L3 out switched ucast pkts
eth_l3out_ucastbytes	(Optional) IPv4 L3 out switched ucast bytes
eth_l3out_mcastpkts	(Optional) IPv4 L3 out switched mcast pkts
eth_l3out_mcastbytes	(Optional) IPv4 L3 out switched mcast bytes
eth_l3out_bcastpkts	(Optional) L3 out switched bcast pkts
eth_l3out_bcastbytes	(Optional) L3 out switched bcast bytes
eth_l3in_routed_pkts	(Optional) L3 in routed pkts
eth_l3in_routed_bytes	(Optional) L3 in routed bytes
eth_l3out_routed_pkts	(Optional) L3 out routed pkts
eth_l3out_routed_bytes	(Optional) L3 out routed bytes
eth_l3avg1_inbytes	(Optional) Load interval 1 L3 average in switched bytes
eth_l3avg1_inpkts	(Optional) Load interval 1 L3 average in switched pkts
eth_l3avg1_outbytes	(Optional) Load interval 1 L3 average out switched bytes
eth_l3avg1_outpkts	(Optional) Load interval 1 L3 average out switched pkts
eth_l3avg2_inbytes	(Optional) Load interval 2 L3 average in switched bytes
eth_l3avg2_inpkts	(Optional) Load interval 2 L3 average in switched pkts
eth_l3avg2_outbytes	(Optional) Load interval 2 L3 average out switched bytes
eth_l3avg2_outpkts	(Optional) Load interval 2 L3 average out switched pkts
eth_l3avg3_inbytes	(Optional) Load interval 3 L3 average in switched bytes
eth_l3avg3_inpkts	(Optional) Load interval 3 L3 average in switched pkts
eth_l3avg3_outbytes	(Optional) Load interval 3 L3 average out switched bytes
eth_l3avg3_outpkts	(Optional) Load interval 3 L3 average out switched pkts
eth_inpkts	(Optional) Packets input
eth_inbytes	(Optional) Bytes input
eth_nobuf	(Optional) No buffer received
eth_inbcast	(Optional) Broadcasts
eth_inmcast	(Optional) Multicasts
eth_inucast	(Optional) Unicasts
eth_ingiants	(Optional) giants
eth_ipmcast	(Optional) IP multicast
eth_inhw_switched	(Optional) Input H/W Switched
eth_insw_switched	(Optional) Input S/W Switched
eth_runts	(Optional) runts
eth_storm_supp	(Optional) storm suppression
eth_throtles	(Optional) throttles
eth_inerr	(Optional) input errors
eth_crc	(Optional) CRC
eth_ecc	(Optional) ECC
eth_frame	(Optional) frame
eth_overrun	(Optional) overrun
eth_ignored	(Optional) ignored
eth_watchdog	(Optional) watchdog
eth_outbcast	(Optional) Broadcasts
eth_outmcast	(Optional) Multicasts
eth_outucast	(Optional) Unicasts
eth_outgiants	(Optional) giants
eth_inpause	(Optional) pause input
eth_dribble	(Optional) input packets with dribble condition
eth_in_ifdown_drops	(Optional) Input if-down drops
eth_bad_eth	(Optional) bad ether type drop
eth_bad_proto	(Optional) bad protocol drops
eth_outpkts	(Optional) packets output
eth_outbytes	(Optional) bytes output
eth_underrun	(Optional) underruns
eth_outhw_switched	(Optional) Out H/W Switched
eth_outsw_switched	(Optional) Out S/W Switched
eth_outerr	(Optional) output errors
eth_coll	(Optional) collisions
eth_resets	(Optional) interface resets
eth_babbles	(Optional) babbles
eth_latecoll	(Optional) late collision
eth_deferred	(Optional) deferred
eth_lostcarrier	(Optional) lost carrier
eth_nocarrier	(Optional) no carrier
eth_outpause	(Optional) PAUSE output
eth_buffail	(Optional) output buffer failures
eth_bufswapped	(Optional) output buffers swapped out
eth_arpdrops	(Optional) arp drops
eth_out_ifdown_drops	(Optional) Output if-down drops
eth_single_coll	(Optional) single collisions
eth_multi_coll	(Optional) multi collisions
eth_excess_coll	(Optional) excessive collisions
eth_jabbers	(Optional) jabbers
eth_shortframe	(Optional) short frames
eth_indiscard	(Optional) discards
eth_bad_encap	(Optional) bad encapsulation
eth_outcrc	(Optional) Output CRC
eth_symbol	(Optional) symbol errors
eth_out_drops	(Optional) output drops
eth_sqetest	(Optional) SQE test
eth_inb64	(Optional) input pkts between 0 and 64 bytes
eth_inb65_127	(Optional) input pkts between 65 and 127 bytes
eth_inb128_255	(Optional) input pkts between 128 and 255 bytes
eth_inb256_511	(Optional) input pkts between 256 and 511 bytes
eth_inb512_1023	(Optional) input pkts between 512 and 1023 bytes
eth_inb1024_1518	(Optional) input pkts between 1024 and 1518 bytes
eth_inb1519_1548	(Optional) input pkts between 1519 and 1548 bytes
eth_intrunk	(Optional) input trunk pkts
eth_outb64	(Optional) output pkts between 0 and 64 bytes
eth_outb65_127	(Optional) output pkts between 65 and 127 bytes
eth_outb128_255	(Optional) output pkts between 128 and 255 bytes
eth_outb256_511	(Optional) output pkts between 256 and 511 bytes
eth_outb512_1023	(Optional) output pkts between 512 and 1023 bytes
eth_outb1024_1518	(Optional) output pkts between 1024 and 1518 bytes
eth_outb1519_1548	(Optional) output pkts between 1519 and 1548 bytes
eth_outtrunk	(Optional) output trunk pkts
eth_bpdu_outlost	(Optional) BPDU output lost
eth_cos0_outlost	(Optional) output pkts
eth_cos1_outlost	(Optional) output pkts
eth_cos2_outlost	(Optional) output pkts
eth_cos3_outlost	(Optional) output pkts
eth_cos4_outlost	(Optional) output pkts
eth_cos5_outlost	(Optional) output pkts
eth_cos6_outlost	(Optional) output pkts
eth_cos7_outlost	(Optional) output pkts
eth_fcoe_in_pkts	(Optional) fcoe in pkts
eth_fcoe_in_octets	(Optional) fcoe in octets
eth_fcoe_out_pkts	(Optional) fcoe out pkts
eth_fcoe_out_octets	(Optional) fcoe out octets
eth_nfcoe_in_pkts	(Optional) nfcoe in pkts
eth_nfcoe_in_octets	(Optional) nfcoe in octets
eth_nfcoe_out_pkts	(Optional) nfcoe out pkts
eth_nfcoe_out_octets	(Optional) nfcoe out octets
eth_eee_atx_lpi_msec	(Optional) Tx Lpi usec
eth_eee_arcv_lpi_msec	(Optional) Rx Lpi usec
eth_eee_atx_lpi_transitions	(Optional) Tx Lpi requests
eth_eee_arcv_lpi_transitions	(Optional) Rx Lpi indications
eth_phy_ber_count	(Optional) Bit error rate counter
eth_phy_errblks_count	(Optional) Errored blocks counter
svi_reliability	(Optional) Reliability
switchport	(Optional) Switchport enabled

Command Mode

/exec

show interface

show interface [ controller | quick ] [ __readonly__ TABLE_interface <interface> [ <state> ] [ <state_rsn_desc> ] [ <state_rsn> ] [ <vsan_brief> ] [ <oper_port_state> ] [ <port_state> ] [ <bound_interface> ] [ <port_desc> ] [ <port_des> ] [ <mgmt_hw_desc1> ] [ <mgmt_hw_addr1> ] [ <port_name> ] [ <hardware> ] [ <sfp> ] [ <port_wwn> ] [ <peer_port_wwn> ] [ <admin_mode> ] [ <admin_trunk_mode> ] [ <snmp_trap> ] [ <status> ] [ <state_rsn1> ] [ <fcot_info> ] [ <bind_info> ] [ <bind_mac> ] [ <bind_type> ] [ <port_mode> ] [ <fcid> ] [ <cfg_port_vsan> ] [ <vsan> ] [ <port_rate_mode> ] [ <oper_speed> ] [ <admin_speed> ] [ <port_channel> ] [ <ip_addr1> ] [ <oper_txbbcredit> ] [ <oper_rxbbcredit> ] [ <port_bb_scn> ] [ <admin_rxbufsize> ] [ <admin_port_encap> ] [ <admin_beacon_mode> ] [ <admin_fec_state> ] [ <oper_fec_state> ] [ <bundle_if_index> ] [ <trkd_if_index> ] [ <trk_cfg_vsans> ] [ <trkd_port_state> ] [ <num_ports> ] [ TABLE_trk_intf [ <trk_intf> ] ] [ <info_type_num> ] [ <info_model_num> ] [ <info_manufacturer> ] [ <info_port_id> ] [ <active_vsan> ] [ <trunk_vsan_up> ] [ <trunk_vsan_isolated> ] [ <trunk_vsan_initializing> ] [ <in_bps> ] [ <in_byps> ] [ <in_fps> ] [ <out_bps> ] [ <out_byps> ] [ <out_fps> ] [ <total_in_frames> ] [ <total_in_bytes> ] [ <total_in_discards> ] [ <total_in_errors> ] [ <invalid_crc> ] [ <unknown_class_frames> ] [ <frames_too_long> ] [ <frames_too_short> ] [ <total_out_frames> ] [ <total_out_bytes> ] [ <total_out_discards> ] [ <total_out_errors> ] [ <in_ols> ] [ <in_lrr> ] [ <in_nos> ] [ <in_loop_inits> ] [ <out_ols> ] [ <out_lrr> ] [ <out_nos> ] [ <out_loop_inits> ] [ <rx_b2b_perf_buff> ] [ <rx_b2b_credit> ] [ <tx_b2b_credit> ] [ <tx_b2b_low_pri_cre> ] [ <fcoe_in_pkts> ] [ <fcoe_in_octets> ] [ <fcoe_out_pkts> ] [ <fcoe_out_octets> ] [ TABLE_members [ <port_channel_member> ] ] [ <interface_last_changed> ] [ <time_last_cleared> ] [ <interface_quick> ] [ <vsan_brief_quick> ] [ <oper_port_state_quick> ] [ <port_state_quick> ] [ <bound_interface_quick> ] [ <port_desc_quick> ] [ <port_des_quick> ] [ <mgmt_hw_desc1_quick> ] [ <mgmt_hw_addr1_quick> ] [ <port_name_quick> ] [ <hardware_quick> ] [ <sfp_quick> ] [ <port_wwn_quick> ] [ <peer_port_wwn_quick> ] [ <admin_mode_quick> ] [ <admin_trunk_mode_quick> ] [ <snmp_trap_quick> ] [ <status_quick> ] [ <state_rsn1_quick> ] [ <fcot_info_quick> ] [ <bind_info_quick> ] [ <bind_mac_quick> ] [ <bind_type_quick> ] [ <port_mode_quick> ] [ <fcid_quick> ] [ <cfg_port_vsan_quick> ] [ <vsan_quick> ] [ <port_rate_mode_quick> ] [ <oper_speed_quick> ] [ <admin_speed_quick> ] [ <port_channel_quick> ] [ <ip_addr1_quick> ] [ <oper_txbbcredit_quick> ] [ <oper_rxbbcredit_quick> ] [ <port_bb_scn_quick> ] [ <admin_rxbufsize_quick> ] [ <admin_port_encap_quick> ] [ <admin_beacon_mode_quick> ] [ <admin_fec_state_quick> ] [ <oper_fec_state_quick> ] [ <bundle_if_index_quick> ] [ <trkd_if_index_quick> ] [ <trk_cfg_vsans_quick> ] [ <trkd_port_state_quick> ] [ <num_ports_quick> ] [ TABLE_trk_intf_quick [ <trk_intf_quick> ] ] [ <info_type_num_quick> ] [ <info_model_num_quick> ] [ <info_manufacturer_quick> ] [ <info_port_id_quick> ] [ <active_vsan_quick> ] [ <trunk_vsan_up_quick> ] [ <trunk_vsan_isolated_quick> ] [ <trunk_vsan_initializing_quick> ] [ <in_bps_quick> ] [ <in_byps_quick> ] [ <in_fps_quick> ] [ <out_bps_quick> ] [ <out_byps_quick> ] [ <out_fps_quick> ] [ <total_in_frames_quick> ] [ <total_in_bytes_quick> ] [ <total_in_discards_quick> ] [ <total_in_errors_quick> ] [ <invalid_crc_quick> ] [ <unknown_class_frames_quick> ] [ <frames_too_long_quick> ] [ <frames_too_short_quick> ] [ <total_out_frames_quick> ] [ <total_out_bytes_quick> ] [ <total_out_discards_quick> ] [ <total_out_errors_quick> ] [ <in_ols_quick> ] [ <in_lrr_quick> ] [ <in_nos_quick> ] [ <in_loop_inits_quick> ] [ <out_ols_quick> ] [ <out_lrr_quick> ] [ <out_nos_quick> ] [ <out_loop_inits_quick> ] [ <rx_b2b_perf_buff_quick> ] [ <rx_b2b_credit_quick> ] [ <tx_b2b_credit_quick> ] [ <tx_b2b_low_pri_cre_quick> ] [ <fcoe_in_pkts_quick> ] [ <fcoe_in_octets_quick> ] [ <fcoe_out_pkts_quick> ] [ <fcoe_out_octets_quick> ] [ TABLE_members_quick [ <port_channel_member_quick> ] ] [ <interface_last_changed_quick> ] [ <time_last_cleared_quick> ] [ <eth_rsn_fac> ] [ <eth_rsn_code> ] [ <admin_state> ] [ <share_state> ] [ <parent_interface> ] [ <vpc_status> ] [ <eth_bundle> ] [ <eth_hw_desc> ] [ <eth_hw_addr> ] [ <eth_bia_addr> ] [ <desc> ] [ <eth_ip_addr> ] [ <eth_ip_mask> ] [ <eth_ip_prefix> ] [ <eth_mtu> ] + [ <eth_bw> ] [ <eth_dly> ] [ <eth_reliability> ] [ <eth_txload> ] [ <eth_rxload> ] [ <eth_encap_vlan> ] [ <encapsulation> ] [ <medium> ] [ <eth_mode> ] [ <eth_duplex> ] [ <eth_speed> ] [ <eth_media> ] [ <eth_beacon> ] [ <eth_autoneg> ] [ <eth_in_flowctrl> ] [ <eth_out_flowctrl> ] [ <eth_mdix> ] [ <eth_ratemode> ] [ <eth_swt_monitor> ] [ <eth_ethertype> ] [ <eth_eee_state> ] [ <eth_admin_fec_state> ] [ <eth_oper_fec_state> ] [ <eth_members> ] [ <eth_link_flapped> ] [ <eth_clear_counters> ] [ <eth_reset_cntr> ] [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_inrate1_summary_bits> ] [ <eth_inrate1_summary_pkts> ] [ <eth_outrate1_summary_bits> ] [ <eth_outrate1_summary_pkts> ] [ <eth_load_interval2_rx> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_load_interval2_tx> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_inrate2_summary_bits> ] [ <eth_inrate2_summary_pkts> ] [ <eth_outrate2_summary_bits> ] [ <eth_outrate2_summary_pkts> ] [ <eth_load_interval3_rx> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_load_interval3_tx> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_inrate3_summary_bits> ] [ <eth_inrate3_summary_pkts> ] [ <eth_outrate3_summary_bits> ] [ <eth_outrate3_summary_pkts> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_jumbo_inpkts> ] [ <eth_storm_supp> ] [ <eth_runts> ] [ <eth_giants> ] [ <eth_crc> ] [ <eth_nobuf> ] [ <eth_inerr> ] [ <eth_frame> ] [ <eth_overrun> ] [ <eth_underrun> ] [ <eth_ignored> ] [ <eth_watchdog> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_in_ifdown_drops> ] [ <eth_dribble> ] [ <eth_indiscard> ] [ <eth_inpause> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_jumbo_outpkts> ] [ <eth_outerr> ] [ <eth_coll> ] [ <eth_deferred> ] [ <eth_latecoll> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_babbles> ] [ <eth_outdiscard> ] [ <eth_outpause> ] [ <mgmt_hw_desc> ] [ <mgmt_hw_addr> ] [ <mgmt_ip_addr> ] [ <mgmt_ip_mask> ] [ <mgmt_mtu> ] [ <mgmt_speed> ] [ <mgmt_duplex> ] [ <vdc_lvl_in_avg_bits> ] [ <vdc_lvl_in_avg_pkts> ] [ <vdc_lvl_out_avg_bits> ] [ <vdc_lvl_out_avg_pkts> ] [ <vdc_lvl_in_pkts> ] [ <vdc_lvl_in_ucast> ] [ <vdc_lvl_in_mcast> ] [ <vdc_lvl_in_bcast> ] [ <vdc_lvl_in_bytes> ] [ <vdc_lvl_in_bps> ] [ <vdc_lvl_in_pps> ] [ <vdc_lvl_out_pkts> ] [ <vdc_lvl_out_ucast> ] [ <vdc_lvl_out_mcast> ] [ <vdc_lvl_out_bcast> ] [ <vdc_lvl_out_bytes> ] [ <vdc_lvl_out_bps> ] [ <vdc_lvl_out_pps> ] [ <mgmt_in_pkts> ] [ <mgmt_in_bytes> ] [ <mgmt_in_mcast> ] [ <mgmt_in_compressed> ] [ <mgmt_in_errors> ] [ <mgmt_in_frame> ] [ <mgmt_in_overrun> ] [ <mgmt_in_fifo> ] [ <mgmt_out_pkts> ] [ <mgmt_out_bytes> ] [ <mgmt_out_underruns> ] [ <mgmt_out_errors> ] [ <mgmt_out_collisions> ] [ <mgmt_out_fifo> ] [ <mgmt_out_carrier> ] [ <mgmt_align_err> ] [ <mgmt_fcs_err> ] [ <mgmt_xmit_err> ] [ <mgmt_rcv_err> ] [ <mgmt_undersize> ] [ <mgmt_outdisc> ] [ <mgmt_single_col> ] [ <mgmt_multi_col> ] [ <mgmt_late_col> ] [ <mgmt_excess_col> ] [ <mgmt_carri_sen> ] [ <mgmt_runts> ] [ <mgmt_giants> ] [ <mgmt_sqetest_err> ] [ <mgmt_deferred_tx> ] [ <mgmt_inmactx_err> ] [ <mgmt_inmacrx_err> ] [ <mgmt_symbol_err> ] [ <loop_in_pkts> ] [ <loop_in_bytes> ] [ <loop_in_mcast> ] [ <loop_in_compressed> ] [ <loop_in_errors> ] [ <loop_in_frame> ] [ <loop_in_overrun> ] [ <loop_in_fifo> ] [ <loop_out_pkts> ] [ <loop_out_bytes> ] [ <loop_out_underruns> ] [ <loop_out_errors> ] [ <loop_out_collisions> ] [ <loop_out_fifo> ] [ <loop_out_carriers> ] <admin-state> { <tunnel-ipv4> | <tunnel-ipv6> } <mtu> <bandwidth> <encap-type> <keepalive-period> <keepalive-retries> { <src-ipv4> | <src-ipv6> } <src-intf> { <dest-ipv4> | <dest-ipv6> } <dest-hostname> <vrf_name> <tunnel_vrf_name> <wccp_header> <ttl_val> <tunnel_pmtud_age_time> <tunnel_pmtud_min_mtu> <tunnel_pmtud> <tunnel_pgm_mtu> <tunnel_rx_pkt_count> <tunnel_rx_byte_count> <tunnel_rx_rate> <tunnel_tx_pkt_count> <tunnel_tx_byte_count> <tunnel_tx_rate> <tunnel_clear_counter> [ <svi_if_index> ] [ <svi_admin_state> ] [ <oper_state> ] [ <svi_rsn_desc> ] [ <svi_line_proto> ] [ <svi_hw> ] [ <svi_mac> ] [ <svi_desc> ] [ <svi_ip_addr> ] [ <svi_ip_mask> ] [ <svi_mtu> ] [ <svi_bw> ] [ <svi_delay> ] [ <vlan_id> ] [ <type> ] [ <svi_tx_load> ] [ <svi_rx_load> ] [ <svi_carrier_delay_sec> ] [ <svi_carrier_delay_msec> ] [ <svi_arp_type> ] [ <svi_arp_timeout> ] [ <svi_time_last_cleared> ] { [ TABLE_sec_vlan ] [ <sec_vlan> ] [ <sec_vlan_type> ] } [ <svi_routed_pkts_in> ] [ <svi_routed_bytes_in> ] [ <svi_routed_pkts_out> ] [ <svi_routed_bytes_out> ] [ <svi_ucast_pkts_in> ] [ <svi_ucast_bytes_in> ] [ <svi_mcast_pkts_in> ] [ <svi_mcast_bytes_in> ] [ <svi_ucast_pkts_out> ] [ <svi_ucast_bytes_out> ] [ <svi_mcast_pkts_out> ] [ <svi_mcast_bytes_out> ] [ <svi_ipv4_ucast_pkts_in> ] [ <svi_ipv4_ucast_bytes_in> ] [ <svi_ipv4_ucast_pkts_out> ] [ <svi_ipv4_ucast_bytes_out> ] [ <svi_ipv4_mcast_pkts_in> ] [ <svi_ipv4_mcast_bytes_in> ] [ <svi_ipv4_mcast_pkts_out> ] [ <svi_ipv4_mcast_bytes_out> ] [ <svi_ipv6_ucast_pkts_in> ] [ <svi_ipv6_ucast_bytes_in> ] [ <svi_ipv6_ucast_pkts_out> ] [ <svi_ipv6_ucast_bytes_out> ] [ <svi_ipv6_mcast_pkts_in> ] [ <svi_ipv6_mcast_bytes_in> ] [ <svi_ipv6_mcast_pkts_out> ] [ <svi_ipv6_mcast_bytes_out> ] [ <svi_average_input_bits> ] [ <svi_average_input_packets> ] [ <svi_average_output_bits> ] [ <svi_average_output_packets> ] [ <svi_rate_in_mins> ] [ <svi_reliability> ] [ <overlay_addr> ] [ <overlay_addr_mask> ] [ <overlay_mtu> ] [ <overlay_bandwidth> ] [ <overlay_encap_str> ] [ <overlay_vrf> ] [ <overlay_src_addr> ] [ <overlay_dst_addr> ] [ <overlay_last_link_flap> ] [ <overlay_clear_counters> ] [ <overlay_load_interval> ] [ <overlay_rx_ucastpkts> ] [ <overlay_rx_ucastbytes> ] [ <overlay_rx_mcastpkts> ] [ <overlay_rx_mcastbytes> ] [ <overlay_rx_pkts> ] [ <overlay_rx_bytes> ] [ <overlay_rx_bcastpkts> ] [ <overlay_rx_bcastbytes> ] [ <overlay_rx_bitrate> ] [ <overlay_rx_pktrate> ] [ <overlay_tx_ucastpkts> ] [ <overlay_tx_ucastbytes> ] [ <overlay_tx_mcastpkts> ] [ <overlay_tx_mcastbytes> ] [ <overlay_tx_bcastpkts> ] [ <overlay_tx_bcastbytes> ] [ <overlay_tx_pkts> ] [ <overlay_tx_bytes> ] [ <overlay_tx_bitrate> ] [ <overlay_tx_pktrate> ] <switchport> ]

Syntax Description


show	Show running system information
interface	Show interface status and information
controller	(Optional) Show controller configured interfaces
quick	(Optional) Show info of interface skipping stats
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
state_rsn_desc	(Optional) Interface state reason detailed
state_rsn	(Optional) Interface state reason
vsan_brief	(Optional) vsan for brief
oper_port_state	(Optional) oper port state
port_state	(Optional) port state
bound_interface	(Optional) bound interface
port_desc	(Optional) port description
port_des	(Optional) port description
mgmt_hw_desc1	(Optional) HW description
mgmt_hw_addr1	(Optional) HW address
port_name	(Optional) port description
hardware	(Optional) Hardware is
sfp	(Optional) sfp
port_wwn	(Optional) port wwn
peer_port_wwn	(Optional) peer port wwn
admin_mode	(Optional) admin mode
admin_trunk_mode	(Optional) admin trunk mode
snmp_trap	(Optional) snmp trap
status	(Optional) Status
state_rsn1	(Optional) state reason
fcot_info	(Optional) fcot info
bind_info	(Optional) bind interface
bind_mac	(Optional) bind mac
bind_type	(Optional) bind type
port_mode	(Optional) port mode
fcid	(Optional) fcid
cfg_port_vsan	(Optional) config port vsan
vsan	(Optional) vsan for brief
port_rate_mode	(Optional) operation port rate mode
oper_speed	(Optional) speed
admin_speed	(Optional) admin speed
port_channel	(Optional) port channel
ip_addr1	(Optional) Ip address
oper_txbbcredit	(Optional) oper tx bbcredit
oper_rxbbcredit	(Optional) oper rx bbcredit
port_bb_scn	(Optional) port bb scn
admin_rxbufsize	(Optional) admin rx bufsize
admin_port_encap	(Optional) admin port encap
admin_beacon_mode	(Optional) admin beacon mode
admin_fec_state	(Optional) admin fec state
oper_fec_state	(Optional) oper fec state
bundle_if_index	(Optional) bundle if index
trkd_if_index	(Optional) Trunk interfaces
trk_cfg_vsans	(Optional) Trunk vsans
trkd_port_state	(Optional) trunk port state
num_ports	(Optional) number of ports
TABLE_trk_intf	(Optional) trunk interfaces
trk_intf	(Optional) track interface
info_type_num	(Optional) info type num
info_model_num	(Optional) info model num
info_manufacturer	(Optional) info manufacturer
info_port_id	(Optional) info port id
active_vsan	(Optional) allowed and active vsan
trunk_vsan_up	(Optional) trunk vsan up
trunk_vsan_isolated	(Optional) trunk vsan isolated
trunk_vsan_initializing	(Optional) trunk vsan initializing
in_bps	(Optional) input bits/sec
in_byps	(Optional) input bytes/sec
in_fps	(Optional) input frames/sec
out_bps	(Optional) output bits/sec
out_byps	(Optional) output bytes/sec
out_fps	(Optional) output frames/sec
total_in_frames	(Optional) total in frames
total_in_bytes	(Optional) total in bytes
total_in_discards	(Optional) total in discards
total_in_errors	(Optional) total in errors
invalid_crc	(Optional) invalid crc
unknown_class_frames	(Optional) unknown class frames
frames_too_long	(Optional) frames too long
frames_too_short	(Optional) frames too short
total_out_frames	(Optional) total out frames
total_out_bytes	(Optional) total out bytes
total_out_discards	(Optional) total out discards
total_out_errors	(Optional) total out errors
in_ols	(Optional) input OLS
in_lrr	(Optional) input LRR
in_nos	(Optional) input NOS
in_loop_inits	(Optional) input loop inits
out_ols	(Optional) output OLS
out_lrr	(Optional) ouput LRR
out_nos	(Optional) output NOS
out_loop_inits	(Optional) output loop inits
rx_b2b_perf_buff	(Optional) rx b2b performance buff
rx_b2b_credit	(Optional) rx b2b credit
tx_b2b_credit	(Optional) tx b2b credit
tx_b2b_low_pri_cre	(Optional) tx b2b low pri credit
fcoe_in_pkts	(Optional) fcoe in pkts
fcoe_in_octets	(Optional) fcoe in octets
fcoe_out_pkts	(Optional) fcoe out pkts
fcoe_out_octets	(Optional) fcoe out octets
TABLE_members	(Optional) table for port-channel member interface
port_channel_member	(Optional) port-channel member interface
interface_last_changed	(Optional) interface last changed
time_last_cleared	(Optional) counters last cleared
interface_quick	(Optional) Interface index
vsan_brief_quick	(Optional) vsan for brief
oper_port_state_quick	(Optional) oper port state
port_state_quick	(Optional) port state
bound_interface_quick	(Optional) bound interface
port_desc_quick	(Optional) port description
port_des_quick	(Optional) port description
mgmt_hw_desc1_quick	(Optional) HW description
mgmt_hw_addr1_quick	(Optional) HW address
port_name_quick	(Optional) port description
hardware_quick	(Optional) Hardware is
sfp_quick	(Optional) sfp
port_wwn_quick	(Optional) port wwn
peer_port_wwn_quick	(Optional) peer port wwn
admin_mode_quick	(Optional) admin mode
admin_trunk_mode_quick	(Optional) admin trunk mode
snmp_trap_quick	(Optional) snmp trap
status_quick	(Optional) Status
state_rsn1_quick	(Optional) state reason
fcot_info_quick	(Optional) fcot info
bind_info_quick	(Optional) bind interface
bind_mac_quick	(Optional) bind mac
bind_type_quick	(Optional) bind type
port_mode_quick	(Optional) port mode
fcid_quick	(Optional) fcid
cfg_port_vsan_quick	(Optional) config port vsan
vsan_quick	(Optional) vsan for brief
port_rate_mode_quick	(Optional) operation port rate mode
oper_speed_quick	(Optional) speed
admin_speed_quick	(Optional) admin speed
port_channel_quick	(Optional) port channel
ip_addr1_quick	(Optional) Ip address
oper_txbbcredit_quick	(Optional) oper tx bbcredit
oper_rxbbcredit_quick	(Optional) oper rx bbcredit
port_bb_scn_quick	(Optional) port bb scn
admin_rxbufsize_quick	(Optional) admin rx bufsize
admin_port_encap_quick	(Optional) admin port encap
admin_beacon_mode_quick	(Optional) admin beacon mode
admin_fec_state_quick	(Optional) admin fec state
oper_fec_state_quick	(Optional) oper fec state
bundle_if_index_quick	(Optional) bundle if index
trkd_if_index_quick	(Optional) Trunk interfaces
trk_cfg_vsans_quick	(Optional) Trunk vsans
trkd_port_state_quick	(Optional) trunk port state
num_ports_quick	(Optional) number of ports
TABLE_trk_intf_quick	(Optional) trunk interfaces
trk_intf_quick	(Optional) track interface
info_type_num_quick	(Optional) info type num
info_model_num_quick	(Optional) info model num
info_manufacturer_quick	(Optional) info manufacturer
info_port_id_quick	(Optional) info port id
active_vsan_quick	(Optional) allowed and active vsan
trunk_vsan_up_quick	(Optional) trunk vsan up
trunk_vsan_isolated_quick	(Optional) trunk vsan isolated
trunk_vsan_initializing_quick	(Optional) trunk vsan initializing
in_bps_quick	(Optional) input bits/sec
in_byps_quick	(Optional) input bytes/sec
in_fps_quick	(Optional) input frames/sec
out_bps_quick	(Optional) output bits/sec
out_byps_quick	(Optional) output bytes/sec
out_fps_quick	(Optional) output frames/sec
total_in_frames_quick	(Optional) total in frames
total_in_bytes_quick	(Optional) total in bytes
total_in_discards_quick	(Optional) total in discards
total_in_errors_quick	(Optional) total in errors
invalid_crc_quick	(Optional) invalid crc
unknown_class_frames_quick	(Optional) unknown class frames
frames_too_long_quick	(Optional) frames too long
frames_too_short_quick	(Optional) frames too short
total_out_frames_quick	(Optional) total out frames
total_out_bytes_quick	(Optional) total out bytes
total_out_discards_quick	(Optional) total out discards
total_out_errors_quick	(Optional) total out errors
in_ols_quick	(Optional) input OLS
in_lrr_quick	(Optional) input LRR
in_nos_quick	(Optional) input NOS
in_loop_inits_quick	(Optional) input loop inits
out_ols_quick	(Optional) output OLS
out_lrr_quick	(Optional) ouput LRR
out_nos_quick	(Optional) output NOS
out_loop_inits_quick	(Optional) output loop inits
rx_b2b_perf_buff_quick	(Optional) rx b2b performance buff
rx_b2b_credit_quick	(Optional) rx b2b credit
tx_b2b_credit_quick	(Optional) tx b2b credit
tx_b2b_low_pri_cre_quick	(Optional) tx b2b low pri credit
fcoe_in_pkts_quick	(Optional) fcoe in pkts
fcoe_in_octets_quick	(Optional) fcoe in octets
fcoe_out_pkts_quick	(Optional) fcoe out pkts
fcoe_out_octets_quick	(Optional) fcoe out octets
TABLE_members_quick	(Optional) table for port-channel member interface
port_channel_member_quick	(Optional) port-channel member interface
interface_last_changed_quick	(Optional) interface last changed
time_last_cleared_quick	(Optional) counters last cleared
eth_rsn_fac	(Optional) State reason facility
eth_rsn_code	(Optional) State reason code
admin_state	(Optional) admin state
share_state	(Optional) Interface ownership
parent_interface	(Optional) parent interface
vpc_status	(Optional) VPC status
eth_bundle	(Optional) Belongs to bundle
eth_hw_desc	(Optional) HW description
eth_hw_addr	(Optional) HW address
eth_bia_addr	(Optional) bia address
desc	(Optional) Interface description
eth_ip_addr	(Optional) IP Address
eth_ip_mask	(Optional) IP address mask
eth_ip_prefix	(Optional) IP address prefix
eth_mtu	(Optional) MTU
eth_bw	(Optional) Bandwidth
eth_dly	(Optional) Delay
eth_reliability	(Optional) Reliability
eth_txload	(Optional) Tx load
eth_rxload	(Optional) Rx load
eth_encap_vlan	(Optional) Encapsulation Vlan
encapsulation	(Optional) Encapsulation
medium	(Optional) medium type
eth_mode	(Optional) Port mode
eth_duplex	(Optional) Duplex
eth_speed	(Optional) Speed
eth_media	(Optional) Media type
eth_beacon	(Optional) Beacon
eth_autoneg	(Optional) Autonegotiation
eth_in_flowctrl	(Optional) Input flowcontrol
eth_out_flowctrl	(Optional) Output flowcontrol
eth_mdix	(Optional) Mdix
eth_ratemode	(Optional) Rate mode
eth_swt_monitor	(Optional) Switchport Monitor
eth_ethertype	(Optional) EtherType
eth_eee_state	(Optional) EEE state
eth_admin_fec_state	(Optional) Admin FEC state
eth_oper_fec_state	(Optional) Oper FEC state
eth_members	(Optional) Members in this channel
eth_link_flapped	(Optional) Last link flapped
eth_clear_counters	(Optional) Last clearing of show interface counters
eth_reset_cntr	(Optional) Interface resets
eth_load_interval1_rx	(Optional) interval 1 timer value in sec
eth_inrate1_bits	(Optional) interval 1 input rate bits/sec
eth_inrate1_pkts	(Optional) interval 1 input rate pkts/sec
eth_load_interval1_tx	(Optional) interval 1 timer value in sec
eth_outrate1_bits	(Optional) interval 1 output rate bits/sec
eth_outrate1_pkts	(Optional) interval 1 output rate pkts/sec
eth_inrate1_summary_bits	(Optional) interval 1 input rate bit summary
eth_inrate1_summary_pkts	(Optional) interval 1 input rate pkt summary
eth_outrate1_summary_bits	(Optional) interval 1 output rate bit summary
eth_outrate1_summary_pkts	(Optional) interval 1 output rate pkt summary
eth_load_interval2_rx	(Optional) interval 2 timer value in sec
eth_inrate2_bits	(Optional) interval 2 input rate bits/sec
eth_inrate2_pkts	(Optional) interval 2 input rate pkts/sec
eth_load_interval2_tx	(Optional) interval 2 timer value in sec
eth_outrate2_bits	(Optional) interval 2 output rate bits/sec
eth_outrate2_pkts	(Optional) interval 2 output rate pkts/sec
eth_inrate2_summary_bits	(Optional) interval 2 input rate bit summary
eth_inrate2_summary_pkts	(Optional) interval 2 input rate pkt summary
eth_outrate2_summary_bits	(Optional) interval 2 output rate bit summary
eth_outrate2_summary_pkts	(Optional) interval 2 output rate pkt summary
eth_load_interval3_rx	(Optional) interval 3 timer value in sec
eth_inrate3_bits	(Optional) interval 3 input rate bits/sec
eth_inrate3_pkts	(Optional) interval 3 input rate pkts/sec
eth_load_interval3_tx	(Optional) interval 3 timer value in sec
eth_outrate3_bits	(Optional) interval 3 output rate bits/sec
eth_outrate3_pkts	(Optional) interval 3 output rate pkts/sec
eth_inrate3_summary_bits	(Optional) interval 3 input rate bit summary
eth_inrate3_summary_pkts	(Optional) interval 3 input rate pkt summary
eth_outrate3_summary_bits	(Optional) interval 3 output rate bit summary
eth_outrate3_summary_pkts	(Optional) interval 3 output rate pkt summary
eth_l2_ucastpkts	(Optional) L2 switched ucast pkts
eth_l2_ucastbytes	(Optional) L2 switched ucast bytes
eth_l2_mcastpkts	(Optional) L2 switched mcast pkts
eth_l2_mcastbytes	(Optional) L2 switched mcast bytes
eth_l2_bcastpkts	(Optional) L2 switched bcast pkts
eth_l2_bcastbytes	(Optional) L2 switched bcast bytes
eth_l3in_ucastpkts	(Optional) L3 in switched ucast pkts
eth_l3in_ucastbytes	(Optional) L3 in switched ucast bytes
eth_l3in_mcastpkts	(Optional) L3 in switched mcast pkts
eth_l3in_mcastbytes	(Optional) L3 in switched mcast bytes
eth_l3in_bcastpkts	(Optional) L3 in switched bcast pkts
eth_l3in_bcastbytes	(Optional) L3 in switched bcast bytes
eth_l3out_ucastpkts	(Optional) L3 out switched ucast pkts
eth_l3out_ucastbytes	(Optional) L3 out switched ucast bytes
eth_l3out_mcastpkts	(Optional) L3 out switched mcast pkts
eth_l3out_mcastbytes	(Optional) L3 out switched mcast bytes
eth_l3out_bcastpkts	(Optional) L3 out switched bcast pkts
eth_l3out_bcastbytes	(Optional) L3 out switched bcast bytes
eth_l3in_routed_pkts	(Optional) L3 in routed pkts
eth_l3in_routed_bytes	(Optional) L3 in routed bytes
eth_l3out_routed_pkts	(Optional) L3 out routed pkts
eth_l3out_routed_bytes	(Optional) L3 out routed bytes
eth_l3avg1_inbytes	(Optional) Load interval 1 L3 average in switched bytes
eth_l3avg1_inpkts	(Optional) Load interval 1 L3 average in switched pkts
eth_l3avg1_outbytes	(Optional) Load interval 1 L3 average out switched bytes
eth_l3avg1_outpkts	(Optional) Load interval 1 L3 average out switched pkts
eth_inucast	(Optional) Unicasts
eth_inmcast	(Optional) Multicasts
eth_inbcast	(Optional) Broadcasts
eth_inpkts	(Optional) Packets input
eth_inbytes	(Optional) Bytes input
eth_jumbo_inpkts	(Optional) Incoming jumbo pkts
eth_storm_supp	(Optional) storm suppression
eth_runts	(Optional) runts
eth_giants	(Optional) giants
eth_crc	(Optional) CRC
eth_nobuf	(Optional) No buffer received
eth_inerr	(Optional) input errors
eth_frame	(Optional) frame
eth_overrun	(Optional) overrun
eth_underrun	(Optional) underruns
eth_ignored	(Optional) ignored
eth_watchdog	(Optional) watchdog
eth_bad_eth	(Optional) bad ether type drop
eth_bad_proto	(Optional) bad protocol drops
eth_in_ifdown_drops	(Optional) Input if-down drops
eth_dribble	(Optional) input packets with dribble condition
eth_indiscard	(Optional) discards
eth_inpause	(Optional) pause input
eth_outucast	(Optional) Unicasts
eth_outmcast	(Optional) Multicasts
eth_outbcast	(Optional) Broadcasts
eth_outpkts	(Optional) packets output
eth_outbytes	(Optional) bytes output
eth_jumbo_outpkts	(Optional) Outgoing jumbo pkts
eth_outerr	(Optional) output errors
eth_coll	(Optional) collisions
eth_deferred	(Optional) deferred
eth_latecoll	(Optional) late collision
eth_lostcarrier	(Optional) lost carrier
eth_nocarrier	(Optional) no carrier
eth_babbles	(Optional) babbles
eth_outdiscard	(Optional) output discard
eth_outpause	(Optional) PAUSE output
mgmt_hw_desc	(Optional) HW description
mgmt_hw_addr	(Optional) HW address
mgmt_ip_addr	(Optional) IP address
mgmt_ip_mask	(Optional) IP address mask
mgmt_mtu	(Optional) MTU
mgmt_speed	(Optional) Speed
mgmt_duplex	(Optional) Duplex
vdc_lvl_in_avg_bits	(Optional) VDC level average input bits
vdc_lvl_in_avg_pkts	(Optional) VDC level average input packets
vdc_lvl_out_avg_bits	(Optional) VDC level average output bits
vdc_lvl_out_avg_pkts	(Optional) VDC level average output packets
vdc_lvl_in_pkts	(Optional) VDC level input packets
vdc_lvl_in_ucast	(Optional) VDC level input unicast packets
vdc_lvl_in_mcast	(Optional) VDC level input multicast packets
vdc_lvl_in_bcast	(Optional) VDC level input broadcast packets
vdc_lvl_in_bytes	(Optional) VDC level input bytes
vdc_lvl_in_bps	(Optional) VDC level input bytes per second
vdc_lvl_in_pps	(Optional) VDC level input packets per second
vdc_lvl_out_pkts	(Optional) VDC level output packets
vdc_lvl_out_ucast	(Optional) VDC level output unicast packets
vdc_lvl_out_mcast	(Optional) VDC level output multicast packets
vdc_lvl_out_bcast	(Optional) VDC level output broadcast packets
vdc_lvl_out_bytes	(Optional) VDC level output bytes
vdc_lvl_out_bps	(Optional) VDC level output bytes per second
vdc_lvl_out_pps	(Optional) VDC level output packets per second
mgmt_in_pkts	(Optional) Input packets
mgmt_in_bytes	(Optional) Input bytes
mgmt_in_mcast	(Optional) Input multicast frames
mgmt_in_compressed	(Optional) Input compressed
mgmt_in_errors	(Optional) Input errors
mgmt_in_frame	(Optional) Input frame errors
mgmt_in_overrun	(Optional) Input overrun
mgmt_in_fifo	(Optional) Input fifo
mgmt_out_pkts	(Optional) Output packets
mgmt_out_bytes	(Optional) Output bytes
mgmt_out_underruns	(Optional) Output overruns
mgmt_out_errors	(Optional) Output errors
mgmt_out_collisions	(Optional) Output collisions
mgmt_out_fifo	(Optional) Output fifo
mgmt_out_carrier	(Optional) Output carrier errors
mgmt_align_err	(Optional) Align error
mgmt_fcs_err	(Optional) FCS error
mgmt_xmit_err	(Optional) Transmit error
mgmt_rcv_err	(Optional) Receive error
mgmt_undersize	(Optional) Undersize
mgmt_outdisc	(Optional) Out discard
mgmt_single_col	(Optional) Single collision
mgmt_multi_col	(Optional) Multiple collision
mgmt_late_col	(Optional) Late collision
mgmt_excess_col	(Optional) Excess collision
mgmt_carri_sen	(Optional) Carrier sense
mgmt_runts	(Optional) Runts
mgmt_giants	(Optional) Giants
mgmt_sqetest_err	(Optional) SQETest error
mgmt_deferred_tx	(Optional) Deferred tx
mgmt_inmactx_err	(Optional) In MAC tx
mgmt_inmacrx_err	(Optional) In MAC rx
mgmt_symbol_err	(Optional) Symbol error
loop_in_pkts	(Optional) Input packets
loop_in_bytes	(Optional) Input bytes
loop_in_mcast	(Optional) Input multicast
loop_in_compressed	(Optional) Input compressed
loop_in_errors	(Optional) Input errors
loop_in_frame	(Optional) Input frame errors
loop_in_overrun	(Optional) Input overrun
loop_in_fifo	(Optional) Input fifo
loop_out_pkts	(Optional) Output packets
loop_out_bytes	(Optional) Output bytes
loop_out_underruns	(Optional) Output underruns
loop_out_errors	(Optional) Output errors
loop_out_collisions	(Optional) Output collisions
loop_out_fifo	(Optional) Output fifo
loop_out_carriers	(Optional) Output carrier errors
admin-state	(Optional)
tunnel-ipv4	(Optional) interface IPv4 address
mtu	(Optional) interface Maximum Transmission Unit
bandwidth	(Optional) interface Bandwidth in kilobits
encap-type	(Optional)
keepalive-period	(Optional) keealive period
keepalive-retries	(Optional) number of retries
src-ipv4	(Optional) tunnel source IPv4 address
src-intf	(Optional) tunnel source interface
dest-ipv4	(Optional) tunnel destination IPv4 address
dest-hostname	(Optional) tunnel destination hostname
vrf_name	(Optional) transport VRF name
tunnel_vrf_name	(Optional) tunnel VRF name
wccp_header	(Optional) wccp header
ttl_val	(Optional) tunnel time to live value
tunnel_pmtud_age_time	(Optional) tunnel path MTU discovery age time
tunnel_pmtud_min_mtu	(Optional) tunnel path MTU discovery min mtu
tunnel_pmtud	(Optional) tunnel path MTU discovered
tunnel_pgm_mtu	(Optional) tunnel actual programmed MTU
tunnel_rx_pkt_count	(Optional) total number of packets received
tunnel_rx_byte_count	(Optional) total number of bytes received
tunnel_rx_rate	(Optional) packets input rate per 5 minutes
tunnel_tx_pkt_count	(Optional) total number of packets transmitted
tunnel_tx_byte_count	(Optional) total number of bytes transmitted
tunnel_tx_rate	(Optional) packets transmitted per 5 minutes
tunnel_clear_counter	(Optional) Last clearing of show interface counters
svi_if_index	(Optional) Interface
svi_admin_state	(Optional)
oper_state	(Optional)
svi_rsn_desc	(Optional) Interface state reason detailed
svi_line_proto	(Optional)
svi_hw	(Optional) Hardware
svi_mac	(Optional) Address
svi_desc	(Optional) Interface Description
svi_ip_addr	(Optional) IP Address
svi_ip_mask	(Optional) IP address mask
svi_mtu	(Optional) MTU size in bytes
svi_bw	(Optional) Bandwidth in kilobits
svi_delay	(Optional) Throughput delay (tens of microseconds)
vlan_id	(Optional) Vlan
type	(Optional) type
svi_tx_load	(Optional) Tx Load
svi_rx_load	(Optional) Rx Load
svi_carrier_delay_sec	(Optional) carrier delay value in seconds
svi_carrier_delay_msec	(Optional) carrier delay value in milli-seconds
svi_arp_type	(Optional) ARP type
svi_arp_timeout	(Optional) ARP timeout value
svi_time_last_cleared	(Optional) Time last cleared
TABLE_sec_vlan	(Optional) secondary vlans
sec_vlan	(Optional) vlan id
sec_vlan_type	(Optional) secondary vlan type
svi_reliability	(Optional) Reliability
overlay_addr	(Optional) Overlay address
overlay_addr_mask	(Optional) Overlay address mask
overlay_mtu	(Optional) MTU
overlay_bandwidth	(Optional) Bandwidth
overlay_encap_str	(Optional) Encap type
overlay_vrf	(Optional) VRF
overlay_src_addr	(Optional) Source address
overlay_dst_addr	(Optional) Destination address
overlay_last_link_flap	(Optional) Last link flap
overlay_clear_counters	(Optional) Last clearing of show interface counters
overlay_load_interval	(Optional) Load interval
overlay_rx_ucastpkts	(Optional) Received ucast pkts
overlay_rx_ucastbytes	(Optional) Received ucast bytes
overlay_rx_mcastpkts	(Optional) Received mcast pkts
overlay_rx_mcastbytes	(Optional) Received mcast bytes
overlay_rx_bcastpkts	(Optional) Received bcast pkts
overlay_rx_bcastbytes	(Optional) Received bcast bytes
overlay_rx_pkts	(Optional) Total received pkts
overlay_rx_bytes	(Optional) Total received bytes
overlay_rx_bitrate	(Optional) Receive bit rate
overlay_rx_pktrate	(Optional) Receive pkt rate
overlay_tx_ucastpkts	(Optional) Trasnmitted ucast pkts
overlay_tx_ucastbytes	(Optional) Trasnmitted ucast bytes
overlay_tx_mcastpkts	(Optional) Trasnmitted mcast pkts
overlay_tx_mcastbytes	(Optional) Trasnmitted mcast bytes
overlay_tx_bcastpkts	(Optional) Trasnmitted bcast pkts
overlay_tx_bcastbytes	(Optional) Trasnmitted bcast bytes
overlay_tx_pkts	(Optional) Total transmitted pkts
overlay_tx_bytes	(Optional) Total transmitted bytes
overlay_tx_bitrate	(Optional) Transmit bit rate
overlay_tx_pktrate	(Optional) Transmit pkt rate
switchport	(Optional) Switchport enabled

Command Mode

/exec

show interface

show interface <ifloop> [ __readonly__ TABLE_interface <interface> [ <state> ] [ <admin_state> ] [ <share_state> ] [ <state_rsn> ] [ <state_rsn_desc> ] [ <desc> ] [ <eth_bundle> ] [ <mgmt_sfp> ] [ <mgmt_type> ] [ <eth_eee_state> ] [ <eth_dce_mode> ] [ <vpc_status> ] [ <eth_rsn_fac> ] [ <eth_rsn_code> ] [ <eth_hw_desc> ] [ <eth_hw_addr> ] [ <eth_bia_addr> ] [ <eth_ip_addr> ] [ <eth_ip_mask> ] [ <eth_ip_prefix> ] [ <eth_mtu> ] [ <eth_bw> ] [ <eth_encap_vlan> ] [ <encapsulation> ] [ <eth_dly> ] [ <eth_reliability> ] [ <eth_txload> ] [ <eth_rxload> ] [ <eth_loopback> ] [ <eth_keepalive> ] [ <eth_duplex> ] [ <eth_speed> ] [ <eth_mode> ] [ <eth_ratemode> ] [ <eth_autoneg> ] [ <eth_beacon> ] [ <eth_media> ] [ <eth_in_flowctrl> ] [ <eth_out_flowctrl> ] [ <eth_mdix> ] [ <eth_swt_monitor> ] [ <eth_ethertype> ] [ <eth_members> ] [ <eth_clk_mode> ] [ <eth_arp_type> ] [ <eth_arp_timeout> ] [ <eth_last_in> ] [ <eth_last_out> ] [ <eth_out_hang> ] [ <eth_clear_counters> ] [ <eth_link_flapped> ] [ <eth_inq_size> ] [ <eth_inq_max> ] [ <eth_inq_drops> ] [ <eth_inq_flush> ] [ <eth_out_drop> ] [ <eth_q_strategy> ] [ <eth_outq_size> ] [ <eth_outq_max> ] [ <eth_reset_cntr> ] [ <loop_in_pkts> ] [ <loop_in_bytes> ] [ <loop_in_mcast> ] [ <loop_in_compressed> ] [ <loop_in_errors> ] [ <loop_in_frame> ] [ <loop_in_overrun> ] [ <loop_in_fifo> ] [ <loop_out_pkts> ] [ <loop_out_bytes> ] [ <loop_out_underruns> ] [ <loop_out_errors> ] [ <loop_out_collisions> ] [ <loop_out_fifo> ] [ <loop_out_carriers> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifloop	Enter interface type and number in module/slot format
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
admin_state	(Optional) Interface admin state
share_state	(Optional) Interface ownership
state_rsn	(Optional) Interface state reason
state_rsn_desc	(Optional) Interface state reason detailed
desc	(Optional) Interface description
mgmt_sfp	(Optional) mgmt sfp
mgmt_type	(Optional) mgmt type
eth_bundle	(Optional) Belongs to bundle
eth_eee_state	(Optional) EEE state
eth_dce_mode	(Optional) DCE mode description
vpc_status	(Optional) VPC status
eth_rsn_fac	(Optional) State reason facility
eth_rsn_code	(Optional) State reason code
eth_hw_desc	(Optional) HW description
eth_hw_addr	(Optional) HW address
eth_bia_addr	(Optional) bia address
eth_ip_addr	(Optional) IP Address
eth_ip_mask	(Optional) IP address mask
eth_ip_prefix	(Optional) IP Prefix
eth_mtu	(Optional) MTU
eth_bw	(Optional) Bandwidth
eth_encap_vlan	(Optional) Encapsulation Vlan
encapsulation	(Optional) Encapsulation
eth_dly	(Optional) Delay
eth_reliability	(Optional) Reliability
eth_txload	(Optional) Tx load
eth_rxload	(Optional) Rx load
eth_loopback	(Optional) Loopback
eth_keepalive	(Optional) Keepalive
eth_duplex	(Optional) Duplex
eth_speed	(Optional) Speed
eth_mode	(Optional) Port mode
eth_ratemode	(Optional) Rate mode
eth_autoneg	(Optional) Autonegotiation
eth_beacon	(Optional) Beacon
eth_media	(Optional) Media type
eth_in_flowctrl	(Optional) Input flowcontrol
eth_out_flowctrl	(Optional) Output flowcontrol
eth_mdix	(Optional) Mdix
eth_swt_monitor	(Optional) Switchport Monitor
eth_ethertype	(Optional) EtherType
eth_members	(Optional) Members in this channel
eth_clk_mode	(Optional) Clock mode
eth_arp_type	(Optional) ARP type
eth_arp_timeout	(Optional) ARP timeout
eth_last_in	(Optional) Last input
eth_last_out	(Optional) Last output
eth_out_hang	(Optional) Last output hang
eth_clear_counters	(Optional) Last clearing of show interface counters
eth_link_flapped	(Optional) Last link flapped
eth_inq_size	(Optional) Input queue size
eth_inq_max	(Optional) Input queue max
eth_inq_drops	(Optional) Input queue drops
eth_inq_flush	(Optional) Input queue flushes
eth_out_drop	(Optional) Output drops
eth_q_strategy	(Optional) Queueing strategy
eth_outq_size	(Optional) Output queue size
eth_outq_max	(Optional) Output queue max
eth_reset_cntr	(Optional) Interface resets
loop_in_pkts	(Optional) Input packets
loop_in_bytes	(Optional) Input bytes
loop_in_mcast	(Optional) Input multicast
loop_in_compressed	(Optional) Input compressed
loop_in_errors	(Optional) Input errors
loop_in_frame	(Optional) Input frame errors
loop_in_overrun	(Optional) Input overrun
loop_in_fifo	(Optional) Input fifo
loop_out_pkts	(Optional) Output packets
loop_out_bytes	(Optional) Output bytes
loop_out_underruns	(Optional) Output underruns
loop_out_errors	(Optional) Output errors
loop_out_collisions	(Optional) Output collisions
loop_out_fifo	(Optional) Output fifo
loop_out_carriers	(Optional) Output carrier errors

Command Mode

/exec

show interface

show interface <iftun_desc> [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn_desc> ] [ <desc> ] <admin-state> { <tunnel-ipv4> | <tunnel-ipv6> } <mtu> <bandwidth> <encap-type> <keepalive-period> <keepalive-retries> { <src-ipv4> | <src-ipv6> } <src-intf> { <dest-ipv4> | <dest-ipv6> } <dest-hostname> <vrf_name> <tunnel_vrf_name> <wccp_header> <ttl_val> <tunnel_pmtud_age_time> <tunnel_pmtud_min_mtu> <tunnel_pmtud> <tunnel_pgm_mtu> <tunnel_rx_pkt_count> <tunnel_rx_byte_count> <tunnel_rx_rate> <tunnel_tx_pkt_count> <tunnel_tx_byte_count> <tunnel_tx_rate> <tunnel_clear_counter> ]

Syntax Description


show	Show running system information
interface	Show interface status and information
iftun_desc	Enter tunnel interface number
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
state_rsn_desc	(Optional) Interface state reason detailed
desc	(Optional) Interface description
admin-state	(Optional)
tunnel-ipv4	(Optional) interface IPv4 address
mtu	(Optional) interface Maximum Transmission Unit
bandwidth	(Optional) interface Bandwidth in kilobits
encap-type	(Optional)
keepalive-period	(Optional) keealive period
keepalive-retries	(Optional) number of retries
src-ipv4	(Optional) tunnel source IPv4 address
src-intf	(Optional) tunnel source interface
dest-ipv4	(Optional) tunnel destination IPv4 address
dest-hostname	(Optional) tunnel destination hostname
vrf_name	(Optional) transport VRF name
tunnel_vrf_name	(Optional) tunnel VRF name
wccp_header	(Optional) wccp header
ttl_val	(Optional) tunnel time to live value
tunnel_pmtud_age_time	(Optional) tunnel path MTU discovery age time
tunnel_pmtud_min_mtu	(Optional) tunnel path MTU discovery min mtu
tunnel_pmtud	(Optional) tunnel path MTU discovered
tunnel_pgm_mtu	(Optional) tunnel actual programmed MTU
tunnel_rx_pkt_count	(Optional) total number of packets received
tunnel_rx_byte_count	(Optional) total number of bytes received
tunnel_rx_rate	(Optional) packets input rate per 5 minutes
tunnel_tx_pkt_count	(Optional) total number of packets transmitted
tunnel_tx_byte_count	(Optional) total number of bytes transmitted
tunnel_tx_rate	(Optional) packets transmitted per 5 minutes
tunnel_clear_counter	(Optional) Last clearing of show interface counters

Command Mode

/exec

show interface

show interface <ifeth> [ quick ] [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn_desc> ] [ <state_rsn> ] [ <eth_rsn_fac> ] [ <eth_rsn_code> ] [ <admin_state> ] [ <share_state> ] [ <parent_interface> ] [ <vpc_status> ] [ <eth_bundle> ] [ <eth_hw_desc> ] [ <eth_hw_addr> ] [ <eth_bia_addr> ] [ <desc> ] [ <eth_ip_addr> ] [ <eth_ip_mask> ] [ <eth_ip_prefix> ] [ <eth_mtu> ] + [ <eth_bw> ] [ <eth_dly> ] [ <eth_reliability> ] [ <eth_txload> ] [ <eth_rxload> ] [ <eth_encap_vlan> ] [ <encapsulation> ] [ <medium> ] [ <eth_mode> ] [ <eth_duplex> ] [ <eth_speed> ] [ <eth_media> ] [ <eth_beacon> ] [ <eth_autoneg> ] [ <eth_in_flowctrl> ] [ <eth_out_flowctrl> ] [ <eth_mdix> ] [ <eth_ratemode> ] [ <eth_swt_monitor> ] [ <eth_ethertype> ] [ <eth_eee_state> ] [ <eth_admin_fec_state> ] [ <eth_oper_fec_state> ] [ <eth_members> ] [ <eth_link_flapped> ] [ <eth_clear_counters> ] [ <eth_reset_cntr> ] [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_inrate1_summary_bits> ] [ <eth_inrate1_summary_pkts> ] [ <eth_outrate1_summary_bits> ] [ <eth_outrate1_summary_pkts> ] [ <eth_load_interval2_rx> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_load_interval2_tx> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_inrate2_summary_bits> ] [ <eth_inrate2_summary_pkts> ] [ <eth_outrate2_summary_bits> ] [ <eth_outrate2_summary_pkts> ] [ <eth_load_interval3_rx> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_load_interval3_tx> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_inrate3_summary_bits> ] [ <eth_inrate3_summary_pkts> ] [ <eth_outrate3_summary_bits> ] [ <eth_outrate3_summary_pkts> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_jumbo_inpkts> ] [ <eth_storm_supp> ] [ <eth_runts> ] [ <eth_giants> ] [ <eth_crc> ] [ <eth_nobuf> ] [ <eth_inerr> ] [ <eth_frame> ] [ <eth_overrun> ] [ <eth_underrun> ] [ <eth_ignored> ] [ <eth_watchdog> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_in_ifdown_drops> ] [ <eth_dribble> ] [ <eth_indiscard> ] [ <eth_inpause> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_jumbo_outpkts> ] [ <eth_outerr> ] [ <eth_coll> ] [ <eth_deferred> ] [ <eth_latecoll> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_babbles> ] [ <eth_outdiscard> ] [ <eth_outpause> ] [ <switchport> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifeth	Enter interface type and number in module/slot format
quick	(Optional) Show info of interface skipping stats
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
state_rsn_desc	(Optional) Interface state reason detailed
state_rsn	(Optional) Interface state reason
eth_rsn_fac	(Optional) State reason facility
eth_rsn_code	(Optional) State reason code
admin_state	(Optional) admin state
share_state	(Optional) Interface ownership
parent_interface	(Optional) parent interface
vpc_status	(Optional) VPC status
eth_bundle	(Optional) Belongs to bundle
eth_hw_desc	(Optional) HW description
eth_hw_addr	(Optional) HW address
eth_bia_addr	(Optional) bia address
desc	(Optional) Interface description
eth_ip_addr	(Optional) IP Address
eth_ip_mask	(Optional) IP address mask
eth_ip_prefix	(Optional) IP address prefix
eth_mtu	(Optional) MTU
eth_bw	(Optional) Bandwidth
eth_dly	(Optional) Delay
eth_reliability	(Optional) Reliability
eth_txload	(Optional) Tx load
eth_rxload	(Optional) Rx load
eth_encap_vlan	(Optional) Encapsulation Vlan
encapsulation	(Optional) Encapsulation
medium	(Optional) medium type
eth_mode	(Optional) Port mode
eth_duplex	(Optional) Duplex
eth_speed	(Optional) Speed
eth_media	(Optional) Media type
eth_beacon	(Optional) Beacon
eth_autoneg	(Optional) Autonegotiation
eth_in_flowctrl	(Optional) Input flowcontrol
eth_out_flowctrl	(Optional) Output flowcontrol
eth_mdix	(Optional) Mdix
eth_ratemode	(Optional) Rate mode
eth_swt_monitor	(Optional) Switchport Monitor
eth_ethertype	(Optional) EtherType
eth_eee_state	(Optional) EEE state
eth_admin_fec_state	(Optional) Admin FEC state
eth_oper_fec_state	(Optional) Oper FEC state
eth_members	(Optional) Members in this channel
eth_link_flapped	(Optional) Last link flapped
eth_clear_counters	(Optional) Last clearing of show interface counters
eth_reset_cntr	(Optional) Interface resets
eth_load_interval1_rx	(Optional) interval 1 timer value in sec
eth_inrate1_bits	(Optional) interval 1 input rate bits/sec
eth_inrate1_pkts	(Optional) interval 1 input rate pkts/sec
eth_load_interval1_tx	(Optional) interval 1 timer value in sec
eth_outrate1_bits	(Optional) interval 1 output rate bits/sec
eth_outrate1_pkts	(Optional) interval 1 output rate pkts/sec
eth_inrate1_summary_bits	(Optional) interval 1 input rate bit summary
eth_inrate1_summary_pkts	(Optional) interval 1 input rate pkt summary
eth_outrate1_summary_bits	(Optional) interval 1 output rate bit summary
eth_outrate1_summary_pkts	(Optional) interval 1 output rate pkt summary
eth_load_interval2_rx	(Optional) interval 2 timer value in sec
eth_inrate2_bits	(Optional) interval 2 input rate bits/sec
eth_inrate2_pkts	(Optional) interval 2 input rate pkts/sec
eth_load_interval2_tx	(Optional) interval 2 timer value in sec
eth_outrate2_bits	(Optional) interval 2 output rate bits/sec
eth_outrate2_pkts	(Optional) interval 2 output rate pkts/sec
eth_inrate2_summary_bits	(Optional) interval 2 input rate bit summary
eth_inrate2_summary_pkts	(Optional) interval 2 input rate pkt summary
eth_outrate2_summary_bits	(Optional) interval 2 output rate bit summary
eth_outrate2_summary_pkts	(Optional) interval 2 output rate pkt summary
eth_load_interval3_rx	(Optional) interval 3 timer value in sec
eth_inrate3_bits	(Optional) interval 3 input rate bits/sec
eth_inrate3_pkts	(Optional) interval 3 input rate pkts/sec
eth_load_interval3_tx	(Optional) interval 3 timer value in sec
eth_outrate3_bits	(Optional) interval 3 output rate bits/sec
eth_outrate3_pkts	(Optional) interval 3 output rate pkts/sec
eth_inrate3_summary_bits	(Optional) interval 3 input rate bit summary
eth_inrate3_summary_pkts	(Optional) interval 3 input rate pkt summary
eth_outrate3_summary_bits	(Optional) interval 3 output rate bit summary
eth_outrate3_summary_pkts	(Optional) interval 3 output rate pkt summary
eth_l2_ucastpkts	(Optional) L2 switched ucast pkts
eth_l2_ucastbytes	(Optional) L2 switched ucast bytes
eth_l2_mcastpkts	(Optional) L2 switched mcast pkts
eth_l2_mcastbytes	(Optional) L2 switched mcast bytes
eth_l2_bcastpkts	(Optional) L2 switched bcast pkts
eth_l2_bcastbytes	(Optional) L2 switched bcast bytes
eth_l3in_ucastpkts	(Optional) L3 in switched ucast pkts
eth_l3in_ucastbytes	(Optional) L3 in switched ucast bytes
eth_l3in_mcastpkts	(Optional) L3 in switched mcast pkts
eth_l3in_mcastbytes	(Optional) L3 in switched mcast bytes
eth_l3in_bcastpkts	(Optional) L3 in switched bcast pkts
eth_l3in_bcastbytes	(Optional) L3 in switched bcast bytes
eth_l3out_ucastpkts	(Optional) L3 out switched ucast pkts
eth_l3out_ucastbytes	(Optional) L3 out switched ucast bytes
eth_l3out_mcastpkts	(Optional) L3 out switched mcast pkts
eth_l3out_mcastbytes	(Optional) L3 out switched mcast bytes
eth_l3out_bcastpkts	(Optional) L3 out switched bcast pkts
eth_l3out_bcastbytes	(Optional) L3 out switched bcast bytes
eth_l3in_routed_pkts	(Optional) L3 in routed pkts
eth_l3in_routed_bytes	(Optional) L3 in routed bytes
eth_l3out_routed_pkts	(Optional) L3 out routed pkts
eth_l3out_routed_bytes	(Optional) L3 out routed bytes
eth_l3avg1_inbytes	(Optional) Load interval 1 L3 average in switched bytes
eth_l3avg1_inpkts	(Optional) Load interval 1 L3 average in switched pkts
eth_l3avg1_outbytes	(Optional) Load interval 1 L3 average out switched bytes
eth_l3avg1_outpkts	(Optional) Load interval 1 L3 average out switched pkts
eth_inucast	(Optional) Unicasts
eth_inmcast	(Optional) Multicasts
eth_inbcast	(Optional) Broadcasts
eth_inpkts	(Optional) Packets input
eth_inbytes	(Optional) Bytes input
eth_jumbo_inpkts	(Optional) Incoming jumbo pkts
eth_storm_supp	(Optional) storm suppression
eth_runts	(Optional) runts
eth_giants	(Optional) giants
eth_crc	(Optional) CRC
eth_nobuf	(Optional) No buffer received
eth_inerr	(Optional) input errors
eth_frame	(Optional) frame
eth_overrun	(Optional) overrun
eth_underrun	(Optional) underruns
eth_ignored	(Optional) ignored
eth_watchdog	(Optional) watchdog
eth_bad_eth	(Optional) bad ether type drop
eth_bad_proto	(Optional) bad protocol drops
eth_in_ifdown_drops	(Optional) Input if-down drops
eth_dribble	(Optional) input packets with dribble condition
eth_indiscard	(Optional) discards
eth_inpause	(Optional) pause input
eth_outucast	(Optional) Unicasts
eth_outmcast	(Optional) Multicasts
eth_outbcast	(Optional) Broadcasts
eth_outpkts	(Optional) packets output
eth_outbytes	(Optional) bytes output
eth_jumbo_outpkts	(Optional) Outgoing jumbo pkts
eth_outerr	(Optional) output errors
eth_coll	(Optional) collisions
eth_deferred	(Optional) deferred
eth_latecoll	(Optional) late collision
eth_lostcarrier	(Optional) lost carrier
eth_nocarrier	(Optional) no carrier
eth_babbles	(Optional) babbles
eth_outdiscard	(Optional) output discard
eth_outpause	(Optional) PAUSE output
switchport	(Optional) Switchport enabled

Command Mode

/exec

show interface

show interface <ifrange> [ __readonly__ TABLE_interface <interface> <state> <state_rsn> <state_rsn_desc> <desc> [ <overlay_addr> ] [ <overlay_addr_mask> ] [ <overlay_mtu> ] [ <overlay_bandwidth> ] [ <overlay_encap_str> ] [ <overlay_vrf> ] [ <overlay_src_addr> ] [ <overlay_dst_addr> ] [ <overlay_last_link_flap> ] [ <overlay_clear_counters> ] [ <overlay_load_interval> ] [ <overlay_rx_ucastpkts> ] [ <overlay_rx_ucastbytes> ] [ <overlay_rx_mcastpkts> ] [ <overlay_rx_mcastbytes> ] [ <overlay_rx_pkts> ] [ <overlay_rx_bytes> ] [ <overlay_rx_bcastpkts> ] [ <overlay_rx_bcastbytes> ] [ <overlay_rx_bitrate> ] [ <overlay_rx_pktrate> ] [ <overlay_tx_ucastpkts> ] [ <overlay_tx_ucastbytes> ] [ <overlay_tx_mcastpkts> ] [ <overlay_tx_mcastbytes> ] [ <overlay_tx_bcastpkts> ] [ <overlay_tx_bcastbytes> ] [ <overlay_tx_pkts> ] [ <overlay_tx_bytes> ] [ <overlay_tx_bitrate> ] [ <overlay_tx_pktrate> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifrange	Enter interface type and number
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
state_rsn	(Optional) Interface state reason
state_rsn_desc	(Optional) Interface state reason detailed
desc	(Optional) Interface description
overlay_addr	(Optional) Overlay address
overlay_addr_mask	(Optional) Overlay address mask
overlay_mtu	(Optional) MTU
overlay_bandwidth	(Optional) Bandwidth
overlay_encap_str	(Optional) Encap type
overlay_vrf	(Optional) VRF
overlay_src_addr	(Optional) Source address
overlay_dst_addr	(Optional) Destination address
overlay_last_link_flap	(Optional) Last link flap
overlay_clear_counters	(Optional) Last clearing of show interface counters
overlay_load_interval	(Optional) Load interval
overlay_rx_ucastpkts	(Optional) Received ucast pkts
overlay_rx_ucastbytes	(Optional) Received ucast bytes
overlay_rx_mcastpkts	(Optional) Received mcast pkts
overlay_rx_mcastbytes	(Optional) Received mcast bytes
overlay_rx_bcastpkts	(Optional) Received bcast pkts
overlay_rx_bcastbytes	(Optional) Received bcast bytes
overlay_rx_pkts	(Optional) Total received pkts
overlay_rx_bytes	(Optional) Total received bytes
overlay_rx_bitrate	(Optional) Receive bit rate
overlay_rx_pktrate	(Optional) Receive pkt rate
overlay_tx_ucastpkts	(Optional) Trasnmitted ucast pkts
overlay_tx_ucastbytes	(Optional) Trasnmitted ucast bytes
overlay_tx_mcastpkts	(Optional) Trasnmitted mcast pkts
overlay_tx_mcastbytes	(Optional) Trasnmitted mcast bytes
overlay_tx_bcastpkts	(Optional) Trasnmitted bcast pkts
overlay_tx_bcastbytes	(Optional) Trasnmitted bcast bytes
overlay_tx_pkts	(Optional) Total transmitted pkts
overlay_tx_bytes	(Optional) Total transmitted bytes
overlay_tx_bitrate	(Optional) Transmit bit rate
overlay_tx_pktrate	(Optional) Transmit pkt rate

Command Mode

/exec

show interface

show interface <ifrange> [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn_desc> ] [ <state_rsn> ] [ <admin_state> ] [ <eth_rsn_fac> ] [ <eth_rsn_code> ] [ <share_state> ] [ <vpc_status> ] [ <eth_bundle> ] [ <eth_hw_desc> ] [ <eth_hw_addr> ] [ <eth_bia_addr> ] [ <desc> ] [ <eth_ip_addr> ] [ <eth_ip_mask> ] [ <eth_mtu> ] [ <eth_bw> ] [ <eth_dly> ] [ <eth_reliability> ] [ <eth_txload> ] [ <eth_rxload> ] [ <eth_encap_vlan> ] [ <encapsulation> ] [ <eth_mode> ] [ <eth_duplex> ] [ <eth_speed> ] [ <eth_media> ] [ <eth_beacon> ] [ <eth_autoneg> ] [ <eth_in_flowctrl> ] [ <eth_out_flowctrl> ] [ <eth_mdix> ] [ <eth_ratemode> ] [ <eth_swt_monitor> ] [ <eth_ethertype> ] [ <eth_members> ] [ <eth_link_flapped> ] [ <eth_clear_counters> ] [ <eth_reset_cntr> ] [ <nve_addr> ] [ <nve_addr_mask> ] [ <nve_vcid> ] [ <nve_mtu> ] [ <nve_bandwidth> ] [ <nve_encap_str> ] [ <nve_vrf> ] [ <nve_src_addr> ] [ <nve_dst_addr> ] [ <nve_last_link_flap> ] [ <nve_clear_counters> ] [ <nve_load_interval> ] [ <nve_rx_ucastpkts> ] [ <nve_rx_ucastbytes> ] [ <nve_rx_mcastpkts> ] [ <nve_rx_mcastbytes> ] [ <nve_rx_pkts> ] [ <nve_rx_bytes> ] [ <nve_rx_bcastpkts> ] [ <nve_rx_bcastbytes> ] [ <nve_rx_bitrate> ] [ <nve_rx_pktrate> ] [ <nve_tx_ucastpkts> ] [ <nve_tx_ucastbytes> ] [ <nve_tx_mcastpkts> ] [ <nve_tx_mcastbytes> ] [ <nve_tx_bcastpkts> ] [ <nve_tx_bcastbytes> ] [ <nve_tx_pkts> ] [ <nve_tx_bytes> ] [ <nve_tx_bitrate> ] [ <nve_tx_pktrate> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifrange	Enter interface type and number
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
state_rsn_desc	(Optional) Interface state reason detailed
state_rsn	(Optional) Interface state reason
admin_state	(Optional) admin state
eth_rsn_fac	(Optional) State reason facility
eth_rsn_code	(Optional) State reason code
share_state	(Optional) Interface ownership
vpc_status	(Optional) VPC status
eth_bundle	(Optional) Belongs to bundle
eth_hw_desc	(Optional) HW description
eth_hw_addr	(Optional) HW address
eth_bia_addr	(Optional) bia address
desc	(Optional) Interface description
eth_ip_addr	(Optional) IP Address
eth_ip_mask	(Optional) IP address mask
eth_mtu	(Optional) MTU
eth_bw	(Optional) Bandwidth
eth_dly	(Optional) Delay
eth_reliability	(Optional) Reliability
eth_txload	(Optional) Tx load
eth_rxload	(Optional) Rx load
eth_encap_vlan	(Optional) Encapsulation Vlan
encapsulation	(Optional) Encapsulation
eth_mode	(Optional) Port mode
eth_duplex	(Optional) Duplex
eth_speed	(Optional) Speed
eth_media	(Optional) Media type
eth_beacon	(Optional) Beacon
eth_autoneg	(Optional) Autonegotiation
eth_in_flowctrl	(Optional) Input flowcontrol
eth_out_flowctrl	(Optional) Output flowcontrol
eth_mdix	(Optional) Mdix
eth_ratemode	(Optional) Rate mode
eth_swt_monitor	(Optional) Switchport Monitor
eth_ethertype	(Optional) EtherType
eth_members	(Optional) Members in this channel
eth_link_flapped	(Optional) Last link flapped
eth_clear_counters	(Optional) Last clearing of show interface counters
eth_reset_cntr	(Optional) Interface resets
nve_addr	(Optional) Peer address
nve_addr_mask	(Optional) Peer address mask
nve_vcid	(Optional) VCID
nve_mtu	(Optional) MTU
nve_bandwidth	(Optional) Bandwidth
nve_encap_str	(Optional) Encap type
nve_vrf	(Optional) VRF
nve_src_addr	(Optional) Source address
nve_dst_addr	(Optional) Destination address
nve_last_link_flap	(Optional) Last link flap
nve_clear_counters	(Optional) Last clearing of show interface counters
nve_load_interval	(Optional) Load interval
nve_rx_ucastpkts	(Optional) Received ucast pkts
nve_rx_ucastbytes	(Optional) Received ucast bytes
nve_rx_mcastpkts	(Optional) Received mcast pkts
nve_rx_mcastbytes	(Optional) Received mcast bytes
nve_rx_bcastpkts	(Optional) Received bcast pkts
nve_rx_bcastbytes	(Optional) Received bcast bytes
nve_rx_pkts	(Optional) Total received pkts
nve_rx_bytes	(Optional) Total received bytes
nve_rx_bitrate	(Optional) Receive bit rate
nve_rx_pktrate	(Optional) Receive pkt rate
nve_tx_ucastpkts	(Optional) Trasnmitted ucast pkts
nve_tx_ucastbytes	(Optional) Trasnmitted ucast bytes
nve_tx_mcastpkts	(Optional) Trasnmitted mcast pkts
nve_tx_mcastbytes	(Optional) Trasnmitted mcast bytes
nve_tx_bcastpkts	(Optional) Trasnmitted bcast pkts
nve_tx_bcastbytes	(Optional) Trasnmitted bcast bytes
nve_tx_pkts	(Optional) Total transmitted pkts
nve_tx_bytes	(Optional) Total transmitted bytes
nve_tx_bitrate	(Optional) Transmit bit rate
nve_tx_pktrate	(Optional) Transmit pkt rate

Command Mode

/exec

show interface aggregate-counters

show interface <ifid_aggr_ctrs2> aggregate-counters [ brief ] [ __readonly__ TABLE_interface <interface_aggr> [ <str_aggr> ] [ <if_index_aggr> ] [ <in_bps_aggr> ] [ <in_byps_aggr> ] [ <in_fps_aggr> ] [ <out_bps_aggr> ] [ <out_byps_aggr> ] [ <out_fps_aggr> ] [ <total_in_frames_aggr> ] [ <total_in_bytes_aggr> ] [ <C2InFrames_aggr> ] [ <C2InOctets_aggr> ] [ <C3InFrames_aggr> ] [ <C3InOctets_aggr> ] [ <CfInFrames_aggr> ] [ <CfInOctets_aggr> ] [ <total_in_discards_aggr> ] [ <total_in_errors_aggr> ] [ <InvalidCrcs_aggr> ] [ <UnknownClassFrames_aggr> ] [ <FramesTooLong_aggr> ] [ <FramesTooShort_aggr> ] [ <total_out_frames_aggr> ] [ <total_out_bytes_aggr> ] [ <C2OutFrames_aggr> ] [ <C2OutOctets_aggr> ] [ <C3OutFrames_aggr> ] [ <C3OutOctets_aggr> ] [ <CfOutFrames_aggr> ] [ <CfOutOctets_aggr> ] [ <total_out_discards_aggr> ] [ <total_out_errors_aggr> ] [ <OlsIns_aggr> ] [ <LRRIn_aggr> ] [ <NOSIn_aggr> ] [ <in_lip_aggr> ] [ <OlsOuts_aggr> ] [ <LRROut_aggr> ] [ <NOSOut_aggr> ] [ <out_lip_aggr> ] [ <LinkFailures_aggr> ] [ <SyncLosses_aggr> ] [ <SigLosses_aggr> ] [ <TxBBCreditTransistionToZero_aggr> ] [ <RxBBCreditTransistionToZero_aggr> ] [ <rx_b2b_perf_buff> ] [ <rx_b2b_credit> ] [ <tx_b2b_credit> ] [ <tx_b2b_low_pri_cre> ] [ <InputRate_aggr_brief> ] [ <TotalIpFrame_aggr_brief> ] [ <OutRate_aggr_brief> ] [ <TotalOpFrame_aggr_brief> ] [ <line_aggr_brief> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid_aggr_ctrs2	Enter interface type and number in module/slot format
aggregate-counters	Show interface aggregate counters
brief	(Optional) Show interface aggregate counters in brief
__readonly__	(Optional) Read Only
interface_aggr	(Optional) Interface index
TABLE_interface	(Optional) show interface
str_aggr	(Optional) string
if_index_aggr	(Optional) index
in_bps_aggr	(Optional) input rate in bits/s
in_byps_aggr	(Optional) input rate in bytes/s
in_fps_aggr	(Optional) input rate in frames/s
out_bps_aggr	(Optional) output rate in bits/s
out_byps_aggr	(Optional) output rate in bytes/s
out_fps_aggr	(Optional) output rate in frames/s
total_in_frames_aggr	(Optional) total input frames
total_in_bytes_aggr	(Optional) total input frames
C2InFrames_aggr	(Optional) class-2 frames
C2InOctets_aggr	(Optional) class-2 frames in bytes
C3InFrames_aggr	(Optional) class-3 frames
C3InOctets_aggr	(Optional) class-3 frames in bytes
CfInFrames_aggr	(Optional) class-f frames
CfInOctets_aggr	(Optional) class-f frames in bytes
total_in_discards_aggr	(Optional) total in discards
total_in_errors_aggr	(Optional) total in errors
InvalidCrcs_aggr	(Optional) invalid CRC
UnknownClassFrames_aggr	(Optional) unknown class
FramesTooLong_aggr	(Optional) too long
FramesTooShort_aggr	(Optional) too short
total_out_frames_aggr	(Optional) total out frames
total_out_bytes_aggr	(Optional) total out frames in byte
C2OutFrames_aggr	(Optional) class-2 out frames
C2OutOctets_aggr	(Optional) class-2 out frames in bytes
C3OutFrames_aggr	(Optional) class-3 out frames
C3OutOctets_aggr	(Optional) class-3 out frames in bytes
CfOutFrames_aggr	(Optional) class-f out frames
CfOutOctets_aggr	(Optional) class-f out frames in bytes
total_out_discards_aggr	(Optional) total out discards
total_out_errors_aggr	(Optional) total out errors
OlsIns_aggr	(Optional) input OLS
LRRIn_aggr	(Optional) input LRR
NOSIn_aggr	(Optional) input NOS
in_lip_aggr	(Optional) loop inits
OlsOuts_aggr	(Optional) output OLS
LRROut_aggr	(Optional) output LRR
NOSOut_aggr	(Optional) output NOS
out_lip_aggr	(Optional) loop inits
LinkFailures_aggr	(Optional) link faliure
SyncLosses_aggr	(Optional) sync losses
SigLosses_aggr	(Optional) signal losses
TxBBCreditTransistionToZero_aggr	(Optional) B2B credit transitions to zero
RxBBCreditTransistionToZero_aggr	(Optional) B2B credit transitions to zero
rx_b2b_perf_buff	(Optional) rx B2B performance buff
rx_b2b_credit	(Optional) rx B2B credit
tx_b2b_credit	(Optional) tx B2B credit
tx_b2b_low_pri_cre	(Optional) tx B2B low price credit
InputRate_aggr_brief	(Optional) Input rate in MBps
TotalIpFrame_aggr_brief	(Optional) Total input frames
OutRate_aggr_brief	(Optional) Output rate in MBps
TotalOpFrame_aggr_brief	(Optional) Total output frames
line_aggr_brief	(Optional) to print a line

Command Mode

/exec

show interface aggregate-counters

show interface <ifid_aggr_ctrs> aggregate-counters [ brief ] [ __readonly__ TABLE_interface <interface_aggr> [ <str_aggr> ] [ <if_index_aggr> ] [ <in_bps_aggr> ] [ <in_byps_aggr> ] [ <in_fps_aggr> ] [ <out_bps_aggr> ] [ <out_byps_aggr> ] [ <out_fps_aggr> ] [ <total_in_frames_aggr> ] [ <total_in_bytes_aggr> ] [ <C2InFrames_aggr> ] [ <C2InOctets_aggr> ] [ <C3InFrames_aggr> ] [ <C3InOctets_aggr> ] [ <CfInFrames_aggr> ] [ <CfInOctets_aggr> ] [ <total_in_discards_aggr> ] [ <total_in_errors_aggr> ] [ <InvalidCrcs_aggr> ] [ <UnknownClassFrames_aggr> ] [ <FramesTooLong_aggr> ] [ <FramesTooShort_aggr> ] [ <total_out_frames_aggr> ] [ <total_out_bytes_aggr> ] [ <C2OutFrames_aggr> ] [ <C2OutOctets_aggr> ] [ <C3OutFrames_aggr> ] [ <C3OutOctets_aggr> ] [ <CfOutFrames_aggr> ] [ <CfOutOctets_aggr> ] [ <total_out_discards_aggr> ] [ <total_out_errors_aggr> ] [ <OlsIns_aggr> ] [ <LRRIn_aggr> ] [ <NOSIn_aggr> ] [ <in_lip_aggr> ] [ <OlsOuts_aggr> ] [ <LRROut_aggr> ] [ <NOSOut_aggr> ] [ <out_lip_aggr> ] [ <LinkFailures_aggr> ] [ <SyncLosses_aggr> ] [ <SigLosses_aggr> ] [ <TxBBCreditTransistionToZero_aggr> ] [ <RxBBCreditTransistionToZero_aggr> ] [ <rx_b2b_perf_buff> ] [ <rx_b2b_credit> ] [ <tx_b2b_credit> ] [ <tx_b2b_low_pri_cre> ] [ <InputRate_aggr_brief> ] [ <TotalIpFrame_aggr_brief> ] [ <OutRate_aggr_brief> ] [ <TotalOpFrame_aggr_brief> ] [ <line_aggr_brief> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid_aggr_ctrs	Enter interface type and number in module/slot format
aggregate-counters	Show interface aggregate counters
brief	(Optional) Show interface aggregate counters in brief
__readonly__	(Optional) Read Only
interface_aggr	(Optional) Interface index
TABLE_interface	(Optional) show interface
str_aggr	(Optional) string
if_index_aggr	(Optional) index
in_bps_aggr	(Optional) input rate in bits/s
in_byps_aggr	(Optional) input rate in bytes/s
in_fps_aggr	(Optional) input rate in frames/s
out_bps_aggr	(Optional) output rate in bits/s
out_byps_aggr	(Optional) output rate in bytes/s
out_fps_aggr	(Optional) output rate in frames/s
total_in_frames_aggr	(Optional) total input frames
total_in_bytes_aggr	(Optional) total input frames
C2InFrames_aggr	(Optional) class-2 frames
C2InOctets_aggr	(Optional) class-2 frames in bytes
C3InFrames_aggr	(Optional) class-3 frames
C3InOctets_aggr	(Optional) class-3 frames in bytes
CfInFrames_aggr	(Optional) class-f frames
CfInOctets_aggr	(Optional) class-f frames in bytes
total_in_discards_aggr	(Optional) total in discards
total_in_errors_aggr	(Optional) total in errors
InvalidCrcs_aggr	(Optional) invalid CRC
UnknownClassFrames_aggr	(Optional) unknown class
FramesTooLong_aggr	(Optional) too long
FramesTooShort_aggr	(Optional) too short
total_out_frames_aggr	(Optional) total out frames
total_out_bytes_aggr	(Optional) total out frames in byte
C2OutFrames_aggr	(Optional) class-2 out frames
C2OutOctets_aggr	(Optional) class-2 out frames in bytes
C3OutFrames_aggr	(Optional) class-3 out frames
C3OutOctets_aggr	(Optional) class-3 out frames in bytes
CfOutFrames_aggr	(Optional) class-f out frames
CfOutOctets_aggr	(Optional) class-f out frames in bytes
total_out_discards_aggr	(Optional) total out discards
total_out_errors_aggr	(Optional) total out errors
OlsIns_aggr	(Optional) input OLS
LRRIn_aggr	(Optional) input LRR
NOSIn_aggr	(Optional) input NOS
in_lip_aggr	(Optional) loop inits
OlsOuts_aggr	(Optional) output OLS
LRROut_aggr	(Optional) output LRR
NOSOut_aggr	(Optional) output NOS
out_lip_aggr	(Optional) loop inits
LinkFailures_aggr	(Optional) link faliure
SyncLosses_aggr	(Optional) sync losses
SigLosses_aggr	(Optional) signal losses
TxBBCreditTransistionToZero_aggr	(Optional) B2B credit transitions to zero
RxBBCreditTransistionToZero_aggr	(Optional) B2B credit transitions to zero
rx_b2b_perf_buff	(Optional) rx B2B performance buff
rx_b2b_credit	(Optional) rx B2B credit
tx_b2b_credit	(Optional) tx B2B credit
tx_b2b_low_pri_cre	(Optional) tx B2B low price credit
InputRate_aggr_brief	(Optional) Input rate in MBps
TotalIpFrame_aggr_brief	(Optional) Total input frames
OutRate_aggr_brief	(Optional) Output rate in MBps
TotalOpFrame_aggr_brief	(Optional) Total output frames
line_aggr_brief	(Optional) to print a line

Command Mode

/exec

show interface aggregate-counters

show interface aggregate-counters [ brief ] [ __readonly__ TABLE_interface <interface_aggr> [ <str_aggr> ] [ <if_index_aggr> ] [ <in_bps_aggr> ] [ <in_byps_aggr> ] [ <in_fps_aggr> ] [ <out_bps_aggr> ] [ <out_byps_aggr> ] [ <out_fps_aggr> ] [ <total_in_frames_aggr> ] [ <total_in_bytes_aggr> ] [ <C2InFrames_aggr> ] [ <C2InOctets_aggr> ] [ <C3InFrames_aggr> ] [ <C3InOctets_aggr> ] [ <CfInFrames_aggr> ] [ <CfInOctets_aggr> ] [ <total_in_discards_aggr> ] [ <total_in_errors_aggr> ] [ <InvalidCrcs_aggr> ] [ <UnknownClassFrames_aggr> ] [ <FramesTooLong_aggr> ] [ <FramesTooShort_aggr> ] [ <total_out_frames_aggr> ] [ <total_out_bytes_aggr> ] [ <C2OutFrames_aggr> ] [ <C2OutOctets_aggr> ] [ <C3OutFrames_aggr> ] [ <C3OutOctets_aggr> ] [ <CfOutFrames_aggr> ] [ <CfOutOctets_aggr> ] [ <total_out_discards_aggr> ] [ <total_out_errors_aggr> ] [ <OlsIns_aggr> ] [ <LRRIn_aggr> ] [ <NOSIn_aggr> ] [ <in_lip_aggr> ] [ <OlsOuts_aggr> ] [ <LRROut_aggr> ] [ <NOSOut_aggr> ] [ <out_lip_aggr> ] [ <LinkFailures_aggr> ] [ <SyncLosses_aggr> ] [ <SigLosses_aggr> ] [ <TxBBCreditTransistionToZero_aggr> ] [ <RxBBCreditTransistionToZero_aggr> ] [ <rx_b2b_perf_buff> ] [ <rx_b2b_credit> ] [ <tx_b2b_credit> ] [ <tx_b2b_low_pri_cre> ] [ <InputRate_aggr_brief> ] [ <TotalIpFrame_aggr_brief> ] [ <OutRate_aggr_brief> ] [ <TotalOpFrame_aggr_brief> ] [ <line_aggr_brief> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
aggregate-counters	Show interface aggregate counters
brief	(Optional) Show interface aggregate counters in brief
__readonly__	(Optional) Read Only
interface_aggr	(Optional) Interface index
TABLE_interface	(Optional) show interface
str_aggr	(Optional) string
if_index_aggr	(Optional) index
in_bps_aggr	(Optional) input rate in bits/s
in_byps_aggr	(Optional) input rate in bytes/s
in_fps_aggr	(Optional) input rate in frames/s
out_bps_aggr	(Optional) output rate in bits/s
out_byps_aggr	(Optional) output rate in bytes/s
out_fps_aggr	(Optional) output rate in frames/s
total_in_frames_aggr	(Optional) total input frames
total_in_bytes_aggr	(Optional) total input frames
C2InFrames_aggr	(Optional) class-2 frames
C2InOctets_aggr	(Optional) class-2 frames in bytes
C3InFrames_aggr	(Optional) class-3 frames
C3InOctets_aggr	(Optional) class-3 frames in bytes
CfInFrames_aggr	(Optional) class-f frames
CfInOctets_aggr	(Optional) class-f frames in bytes
total_in_discards_aggr	(Optional) total in discards
total_in_errors_aggr	(Optional) total in errors
InvalidCrcs_aggr	(Optional) invalid CRC
UnknownClassFrames_aggr	(Optional) unknown class
FramesTooLong_aggr	(Optional) too long
FramesTooShort_aggr	(Optional) too short
total_out_frames_aggr	(Optional) total out frames
total_out_bytes_aggr	(Optional) total out frames in byte
C2OutFrames_aggr	(Optional) class-2 out frames
C2OutOctets_aggr	(Optional) class-2 out frames in bytes
C3OutFrames_aggr	(Optional) class-3 out frames
C3OutOctets_aggr	(Optional) class-3 out frames in bytes
CfOutFrames_aggr	(Optional) class-f out frames
CfOutOctets_aggr	(Optional) class-f out frames in bytes
total_out_discards_aggr	(Optional) total out discards
total_out_errors_aggr	(Optional) total out errors
OlsIns_aggr	(Optional) input OLS
LRRIn_aggr	(Optional) input LRR
NOSIn_aggr	(Optional) input NOS
in_lip_aggr	(Optional) loop inits
OlsOuts_aggr	(Optional) output OLS
LRROut_aggr	(Optional) output LRR
NOSOut_aggr	(Optional) output NOS
out_lip_aggr	(Optional) loop inits
LinkFailures_aggr	(Optional) link faliure
SyncLosses_aggr	(Optional) sync losses
SigLosses_aggr	(Optional) signal losses
TxBBCreditTransistionToZero_aggr	(Optional) B2B credit transitions to zero
RxBBCreditTransistionToZero_aggr	(Optional) B2B credit transitions to zero
rx_b2b_perf_buff	(Optional) rx B2B performance buff
rx_b2b_credit	(Optional) rx B2B credit
tx_b2b_credit	(Optional) tx B2B credit
tx_b2b_low_pri_cre	(Optional) tx B2B low price credit
InputRate_aggr_brief	(Optional) Input rate in MBps
TotalIpFrame_aggr_brief	(Optional) Total input frames
OutRate_aggr_brief	(Optional) Output rate in MBps
TotalOpFrame_aggr_brief	(Optional) Total output frames
line_aggr_brief	(Optional) to print a line

Command Mode

/exec

show interface bbcredit

show interface <ifid_bbcrd> bbcredit [ __readonly__ TABLE_interface [ <interface_sfp> <state> [ <down_reason> ] [ <transmit_b2b> ] [ <receive_b2b> ] [ <rx_b2b_perf_buff> ] [ <rx_b2b_credit> ] [ <tx_b2b_credit> ] [ <tx_b2b_low_pri_cre> ] ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid_bbcrd	Enter interface type and number in module/slot format
bbcredit	Show BB_credit information for interface
__readonly__	(Optional) Read Only
interface_sfp	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) State
down_reason	(Optional) Reason for interface being down
transmit_b2b	(Optional) Transmit B2B
receive_b2b	(Optional) Receive B2B
rx_b2b_perf_buff	(Optional) RX B2B performance buffer
rx_b2b_credit	(Optional) RX B2B credit remaining
tx_b2b_credit	(Optional) TX B2B credit remaining
tx_b2b_low_pri_cre	(Optional) TX B2B low priority Credit

Command Mode

/exec

show interface brief

show interface <ifeth_brf> brief [ __readonly__ TABLE_interface <interface> [ <vlan> ] <type> <portmode> <state> <state_rsn_desc> <speed> <ratemode> [ <portchan> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifeth_brf	Enter interface type and number in module/slot format
brief	Show brief info of interface
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
vlan	(Optional) Vlan
type	(Optional) Type
portmode	(Optional) Port mode
state	(Optional) Interface state
state_rsn_desc	(Optional) Interface state reason detailed
speed	(Optional) Speed
ratemode	(Optional) Interface port speed
portchan	(Optional) Port Channel Membership

Command Mode

/exec

show interface brief

show interface <ifid_brf> brief [ __readonly__ { TABLE_interface <interface> [ <desc> ] [ [ <svi_if_index> ] [ <svi_admin_state> ] [ <oper_state> ] [ <svi_rsn_desc> ] [ <svi_line_proto> ] [ <svi_hw> ] [ <svi_mac> ] [ <svi_desc> ] [ <svi_ip_addr> ] [ <svi_ip_mask> ] [ <svi_mtu> ] [ <svi_bw> ] [ <svi_delay> ] [ <vlan_id> ] [ <type> ] ] [ [ <svi_tx_load> ] [ <svi_rx_load> ] ] [ [ <svi_carrier_delay_sec> ] [ <svi_carrier_delay_msec> ] [ <svi_arp_type> ] [ <svi_arp_timeout> ] ] [ [ <svi_time_last_cleared> ] ] [ { TABLE_secondary_vlan <sec_vlan> <sec_vlan_type> } ] [ [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_inrate1_summary_bits> ] [ <eth_inrate1_summary_pkts> ] [ <eth_outrate1_summary_bits> ] [ <eth_outrate1_summary_pkts> ] [ <eth_load_interval2_rx> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_load_interval2_tx> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_inrate2_summary_bits> ] [ <eth_inrate2_summary_pkts> ] [ <eth_outrate2_summary_bits> ] [ <eth_outrate2_summary_pkts> ] [ <eth_load_interval3_rx> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_load_interval3_tx> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_inrate3_summary_bits> ] [ <eth_inrate3_summary_pkts> ] [ <eth_outrate3_summary_bits> ] [ <eth_outrate3_summary_pkts> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_l3avg2_inbytes> ] [ <eth_l3avg2_inpkts> ] [ <eth_l3avg2_outbytes> ] [ <eth_l3avg2_outpkts> ] [ <eth_l3avg3_inbytes> ] [ <eth_l3avg3_inpkts> ] [ <eth_l3avg3_outbytes> ] [ <eth_l3avg3_outpkts> ] [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_nobuf> ] [ <eth_inbcast> ] [ <eth_inmcast> ] [ <eth_inucast> ] [ <eth_ingiants> ] [ <eth_ipmcast> ] [ <eth_inhw_switched> ] [ <eth_insw_switched> ] [ <eth_runts> ] [ <eth_storm_supp> ] [ <eth_throtles> ] [ <eth_inerr> ] [ <eth_crc> ] [ <eth_ecc> ] [ <eth_frame> ] [ <eth_overrun> ] [ <eth_ignored> ] [ <eth_watchdog> ] [ <eth_outbcast> ] [ <eth_outmcast> ] [ <eth_outucast> ] [ <eth_outgiants> ] [ <eth_inpause> ] [ <eth_dribble> ] [ <eth_in_ifdown_drops> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_underrun> ] [ <eth_outhw_switched> ] [ <eth_outsw_switched> ] [ <eth_outerr> ] [ <eth_coll> ] [ <eth_resets> ] [ <eth_babbles> ] [ <eth_latecoll> ] [ <eth_deferred> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_outpause> ] [ <eth_buffail> ] [ <eth_bufswapped> ] [ <eth_arpdrops> ] [ <eth_out_ifdown_drops> ] [ <eth_single_coll> ] [ <eth_multi_coll> ] [ <eth_excess_coll> ] [ <eth_jabbers> ] [ <eth_shortframe> ] [ <eth_indiscard> ] [ <eth_bad_encap> ] [ <eth_outcrc> ] [ <eth_symbol> ] [ <eth_out_drops> ] [ <eth_sqetest> ] [ <eth_inb64> ] [ <eth_inb65_127> ] [ <eth_inb128_255> ] [ <eth_inb256_511> ] [ <eth_inb512_1023> ] [ <eth_inb1024_1518> ] [ <eth_inb1519_1548> ] [ <eth_intrunk> ] [ <eth_outb64> ] [ <eth_outb65_127> ] [ <eth_outb128_255> ] [ <eth_outb256_511> ] [ <eth_outb512_1023> ] [ <eth_outb1024_1518> ] [ <eth_outb1519_1548> ] [ <eth_outtrunk> ] [ <eth_bpdu_outlost> ] [ <eth_cos0_outlost> ] [ <eth_cos1_outlost> ] [ <eth_cos2_outlost> ] [ <eth_cos3_outlost> ] [ <eth_cos4_outlost> ] [ <eth_cos5_outlost> ] [ <eth_cos6_outlost> ] [ <eth_cos7_outlost> ] [ <eth_fcoe_in_pkts> ] [ <eth_fcoe_in_octets> ] [ <eth_fcoe_out_pkts> ] [ <eth_fcoe_out_octets> ] [ <eth_nfcoe_in_pkts> ] [ <eth_nfcoe_in_octets> ] [ <eth_nfcoe_out_pkts> ] [ <eth_nfcoe_out_octets> ] [ <eth_eee_atx_lpi_msec> ] [ <eth_eee_arcv_lpi_msec> ] [ <eth_eee_atx_lpi_transitions> ] [ <eth_eee_arcv_lpi_transitions> ] [ <eth_phy_ber_count> ] [ <eth_phy_errblks_count> ] ] [ [ <svi_routed_pkts_in> ] [ <svi_routed_bytes_in> ] [ <svi_routed_pkts_out> ] [ <svi_routed_bytes_out> ] [ <svi_ucast_pkts_in> ] [ <svi_ucast_bytes_in> ] [ <svi_mcast_pkts_in> ] [ <svi_mcast_bytes_in> ] [ <svi_ucast_pkts_out> ] [ <svi_ucast_bytes_out> ] [ <svi_mcast_pkts_out> ] [ <svi_mcast_bytes_out> ] [ <svi_ipv4_ucast_pkts_in> ] [ <svi_ipv4_ucast_bytes_in> ] [ <svi_ipv4_ucast_pkts_out> ] [ <svi_ipv4_ucast_bytes_out> ] [ <svi_ipv4_mcast_pkts_in> ] [ <svi_ipv4_mcast_bytes_in> ] [ <svi_ipv4_mcast_pkts_out> ] [ <svi_ipv4_mcast_bytes_out> ] [ <svi_ipv6_ucast_pkts_in> ] [ <svi_ipv6_ucast_bytes_in> ] [ <svi_ipv6_ucast_pkts_out> ] [ <svi_ipv6_ucast_bytes_out> ] [ <svi_ipv6_mcast_pkts_in> ] [ <svi_ipv6_mcast_bytes_in> ] [ <svi_ipv6_mcast_pkts_out> ] [ <svi_ipv6_mcast_bytes_out> ] [ <svi_average_input_bits> ] [ <svi_average_input_packets> ] [ <svi_average_output_bits> ] [ <svi_average_output_packets> ] [ <svi_rate_in_mins> ] ] [ [ <svi_reliability> ] ] [ <switchport> ] } ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid_brf	Enter interface type and number in module/slot format
brief	Show brief info of interface
__readonly__	(Optional) Read Only
TABLE_interface	(Optional) show interface
interface	(Optional) Interface index
desc	(Optional) Interface description
svi_if_index	(Optional) Interface
svi_admin_state	(Optional)
oper_state	(Optional)
svi_rsn_desc	(Optional) Interface state reason detailed
svi_line_proto	(Optional)
svi_hw	(Optional) Hardware
svi_mac	(Optional) Address
svi_desc	(Optional) Interface Description
svi_ip_addr	(Optional) IP Address
svi_ip_mask	(Optional) IP address mask
svi_mtu	(Optional) MTU size in bytes
svi_bw	(Optional) Bandwidth in kilobits
svi_delay	(Optional) Throughput delay (tens of microseconds)
vlan_id	(Optional) Vlan
type	(Optional) type
svi_tx_load	(Optional) Tx Load
svi_rx_load	(Optional) Rx Load
svi_carrier_delay_sec	(Optional) carrier delay value in seconds
svi_carrier_delay_msec	(Optional) carrier delay value in milli-seconds
svi_arp_type	(Optional) ARP type
svi_arp_timeout	(Optional) ARP timeout value
svi_time_last_cleared	(Optional) Time last cleared
TABLE_secondary_vlan	(Optional) Secondary vlan
sec_vlan	(Optional) Secondary vlan ID
sec_vlan_type	(Optional) Secondary vlan type
eth_load_interval1_rx	(Optional) interval 1 timer value in sec
eth_inrate1_bits	(Optional) interval 1 input rate bits/sec
eth_inrate1_pkts	(Optional) interval 1 input rate pkts/sec
eth_load_interval1_tx	(Optional) interval 1 timer value in sec
eth_outrate1_bits	(Optional) interval 1 output rate bits/sec
eth_outrate1_pkts	(Optional) interval 1 output rate pkts/sec
eth_inrate1_summary_bits	(Optional) interval 1 input rate bit summary
eth_inrate1_summary_pkts	(Optional) interval 1 input rate pkt summary
eth_outrate1_summary_bits	(Optional) interval 1 output rate bit summary
eth_outrate1_summary_pkts	(Optional) interval 1 output rate pkt summary
eth_load_interval2_rx	(Optional) interval 2 timer value in sec
eth_inrate2_bits	(Optional) interval 2 input rate bits/sec
eth_inrate2_pkts	(Optional) interval 2 input rate pkts/sec
eth_load_interval2_tx	(Optional) interval 2 timer value in sec
eth_outrate2_bits	(Optional) interval 2 output rate bits/sec
eth_outrate2_pkts	(Optional) interval 2 output rate pkts/sec
eth_inrate2_summary_bits	(Optional) interval 2 input rate bit summary
eth_inrate2_summary_pkts	(Optional) interval 2 input rate pkt summary
eth_outrate2_summary_bits	(Optional) interval 2 output rate bit summary
eth_outrate2_summary_pkts	(Optional) interval 2 output rate pkt summary
eth_load_interval3_rx	(Optional) interval 3 timer value in sec
eth_inrate3_bits	(Optional) interval 3 input rate bits/sec
eth_inrate3_pkts	(Optional) interval 3 input rate pkts/sec
eth_load_interval3_tx	(Optional) interval 3 timer value in sec
eth_outrate3_bits	(Optional) interval 3 output rate bits/sec
eth_outrate3_pkts	(Optional) interval 3 output rate pkts/sec
eth_inrate3_summary_bits	(Optional) interval 3 input rate bit summary
eth_inrate3_summary_pkts	(Optional) interval 3 input rate pkt summary
eth_outrate3_summary_bits	(Optional) interval 3 output rate bit summary
eth_outrate3_summary_pkts	(Optional) interval 3 output rate pkt summary
eth_l2_ucastpkts	(Optional) L2 switched ucast pkts
eth_l2_ucastbytes	(Optional) L2 switched ucast bytes
eth_l2_mcastpkts	(Optional) L2 switched mcast pkts
eth_l2_mcastbytes	(Optional) L2 switched mcast bytes
eth_l2_bcastpkts	(Optional) L2 switched bcast pkts
eth_l2_bcastbytes	(Optional) L2 switched bcast bytes
eth_l3in_ucastpkts	(Optional) IPv4 L3 in switched ucast pkts
eth_l3in_ucastbytes	(Optional) IPv4 L3 in switched ucast bytes
eth_l3in_mcastpkts	(Optional) IPv4 L3 in switched mcast pkts
eth_l3in_mcastbytes	(Optional) IPv4 L3 in switched mcast bytes
eth_l3in_bcastpkts	(Optional) L3 in switched bcast pkts
eth_l3in_bcastbytes	(Optional) L3 in switched bcast bytes
eth_l3out_ucastpkts	(Optional) IPv4 L3 out switched ucast pkts
eth_l3out_ucastbytes	(Optional) IPv4 L3 out switched ucast bytes
eth_l3out_mcastpkts	(Optional) IPv4 L3 out switched mcast pkts
eth_l3out_mcastbytes	(Optional) IPv4 L3 out switched mcast bytes
eth_l3out_bcastpkts	(Optional) L3 out switched bcast pkts
eth_l3out_bcastbytes	(Optional) L3 out switched bcast bytes
eth_l3in_routed_pkts	(Optional) L3 in routed pkts
eth_l3in_routed_bytes	(Optional) L3 in routed bytes
eth_l3out_routed_pkts	(Optional) L3 out routed pkts
eth_l3out_routed_bytes	(Optional) L3 out routed bytes
eth_l3avg1_inbytes	(Optional) Load interval 1 L3 average in switched bytes
eth_l3avg1_inpkts	(Optional) Load interval 1 L3 average in switched pkts
eth_l3avg1_outbytes	(Optional) Load interval 1 L3 average out switched bytes
eth_l3avg1_outpkts	(Optional) Load interval 1 L3 average out switched pkts
eth_l3avg2_inbytes	(Optional) Load interval 2 L3 average in switched bytes
eth_l3avg2_inpkts	(Optional) Load interval 2 L3 average in switched pkts
eth_l3avg2_outbytes	(Optional) Load interval 2 L3 average out switched bytes
eth_l3avg2_outpkts	(Optional) Load interval 2 L3 average out switched pkts
eth_l3avg3_inbytes	(Optional) Load interval 3 L3 average in switched bytes
eth_l3avg3_inpkts	(Optional) Load interval 3 L3 average in switched pkts
eth_l3avg3_outbytes	(Optional) Load interval 3 L3 average out switched bytes
eth_l3avg3_outpkts	(Optional) Load interval 3 L3 average out switched pkts
eth_inpkts	(Optional) Packets input
eth_inbytes	(Optional) Bytes input
eth_nobuf	(Optional) No buffer received
eth_inbcast	(Optional) Broadcasts
eth_inmcast	(Optional) Multicasts
eth_inucast	(Optional) Unicasts
eth_ingiants	(Optional) giants
eth_ipmcast	(Optional) IP multicast
eth_inhw_switched	(Optional) Input H/W Switched
eth_insw_switched	(Optional) Input S/W Switched
eth_runts	(Optional) runts
eth_storm_supp	(Optional) storm suppression
eth_throtles	(Optional) throttles
eth_inerr	(Optional) input errors
eth_crc	(Optional) CRC
eth_ecc	(Optional) ECC
eth_frame	(Optional) frame
eth_overrun	(Optional) overrun
eth_ignored	(Optional) ignored
eth_watchdog	(Optional) watchdog
eth_outbcast	(Optional) Broadcasts
eth_outmcast	(Optional) Multicasts
eth_outucast	(Optional) Unicasts
eth_outgiants	(Optional) giants
eth_inpause	(Optional) pause input
eth_dribble	(Optional) input packets with dribble condition
eth_in_ifdown_drops	(Optional) Input if-down drops
eth_bad_eth	(Optional) bad ether type drop
eth_bad_proto	(Optional) bad protocol drops
eth_outpkts	(Optional) packets output
eth_outbytes	(Optional) bytes output
eth_underrun	(Optional) underruns
eth_outhw_switched	(Optional) Out H/W Switched
eth_outsw_switched	(Optional) Out S/W Switched
eth_outerr	(Optional) output errors
eth_coll	(Optional) collisions
eth_resets	(Optional) interface resets
eth_babbles	(Optional) babbles
eth_latecoll	(Optional) late collision
eth_deferred	(Optional) deferred
eth_lostcarrier	(Optional) lost carrier
eth_nocarrier	(Optional) no carrier
eth_outpause	(Optional) PAUSE output
eth_buffail	(Optional) output buffer failures
eth_bufswapped	(Optional) output buffers swapped out
eth_arpdrops	(Optional) arp drops
eth_out_ifdown_drops	(Optional) Output if-down drops
eth_single_coll	(Optional) single collisions
eth_multi_coll	(Optional) multi collisions
eth_excess_coll	(Optional) excessive collisions
eth_jabbers	(Optional) jabbers
eth_shortframe	(Optional) short frames
eth_indiscard	(Optional) discards
eth_bad_encap	(Optional) bad encapsulation
eth_outcrc	(Optional) Output CRC
eth_symbol	(Optional) symbol errors
eth_out_drops	(Optional) output drops
eth_sqetest	(Optional) SQE test
eth_inb64	(Optional) input pkts between 0 and 64 bytes
eth_inb65_127	(Optional) input pkts between 65 and 127 bytes
eth_inb128_255	(Optional) input pkts between 128 and 255 bytes
eth_inb256_511	(Optional) input pkts between 256 and 511 bytes
eth_inb512_1023	(Optional) input pkts between 512 and 1023 bytes
eth_inb1024_1518	(Optional) input pkts between 1024 and 1518 bytes
eth_inb1519_1548	(Optional) input pkts between 1519 and 1548 bytes
eth_intrunk	(Optional) input trunk pkts
eth_outb64	(Optional) output pkts between 0 and 64 bytes
eth_outb65_127	(Optional) output pkts between 65 and 127 bytes
eth_outb128_255	(Optional) output pkts between 128 and 255 bytes
eth_outb256_511	(Optional) output pkts between 256 and 511 bytes
eth_outb512_1023	(Optional) output pkts between 512 and 1023 bytes
eth_outb1024_1518	(Optional) output pkts between 1024 and 1518 bytes
eth_outb1519_1548	(Optional) output pkts between 1519 and 1548 bytes
eth_outtrunk	(Optional) output trunk pkts
eth_bpdu_outlost	(Optional) BPDU output lost
eth_cos0_outlost	(Optional) output pkts
eth_cos1_outlost	(Optional) output pkts
eth_cos2_outlost	(Optional) output pkts
eth_cos3_outlost	(Optional) output pkts
eth_cos4_outlost	(Optional) output pkts
eth_cos5_outlost	(Optional) output pkts
eth_cos6_outlost	(Optional) output pkts
eth_cos7_outlost	(Optional) output pkts
eth_fcoe_in_pkts	(Optional) fcoe in pkts
eth_fcoe_in_octets	(Optional) fcoe in octets
eth_fcoe_out_pkts	(Optional) fcoe out pkts
eth_fcoe_out_octets	(Optional) fcoe out octets
eth_nfcoe_in_pkts	(Optional) nfcoe in pkts
eth_nfcoe_in_octets	(Optional) nfcoe in octets
eth_nfcoe_out_pkts	(Optional) nfcoe out pkts
eth_nfcoe_out_octets	(Optional) nfcoe out octets
eth_eee_atx_lpi_msec	(Optional) Tx Lpi usec
eth_eee_arcv_lpi_msec	(Optional) Rx Lpi usec
eth_eee_atx_lpi_transitions	(Optional) Tx Lpi requests
eth_eee_arcv_lpi_transitions	(Optional) Rx Lpi indications
eth_phy_ber_count	(Optional) Bit error rate counter
eth_phy_errblks_count	(Optional) Errored blocks counter
svi_reliability	(Optional) Reliability
switchport	(Optional) Switchport enabled

Command Mode

/exec

show interface brief

show interface <ifpch_brf> brief [ __readonly__ TABLE_interface <interface> [ <vlan> ] <type> <portmode> <state> <state_rsn_desc> <speed> <ratemode> [ <proto> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifpch_brf	Enter interface type and number in module/slot format
brief	Show brief info of interface
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
vlan	(Optional) Vlan
type	(Optional) Type
portmode	(Optional) Port mode
state	(Optional) Interface state
state_rsn_desc	(Optional) Interface state reason detailed
speed	(Optional) Speed
ratemode	(Optional) Interface port speed
proto	(Optional) Port Channel Protocol

Command Mode

/exec

show interface brief

show interface brief [ controller | cli ] [ __readonly__ { TABLE_interface [ <interface> ] [ <vlan> ] [ <type> ] [ <portmode> ] [ <state> ] [ <state_rsn> ] [ <state_rsn_desc> ] [ <desc> ] [ <vrf> ] [ <ipv6_addr> ] [ <ip_addr> ] [ <speed> ] [ <mtu> ] [ <ratemode> ] [ <portchan> ] [ <proto> ] [ <interface_vfc> ] [ <vsan_brief> ] [ <admin_mode> ] [ <admin_trunk_mode> ] [ <status> ] [ <fcot_info> ] [ <bind_info> ] [ <bind_type> ] [ <bind_mac> ] [ <port_rate_mode> ] [ <oper_speed> ] [ <port_channel> ] [ <ip_addr1> ] [ { TABLE_secondary_vlan <sec_vlan> <sec_vlan_type> } ] [ <svi_admin_state> ] [ <svi_rsn_desc> ] } ]

Syntax Description


show	Show running system information
interface	Show interface status and information
brief	Show brief info of interface
controller	(Optional) Show controller configured interfaces
cli	(Optional) Show CLI configured interfaces
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
state_rsn	(Optional) Interface state reason
state_rsn_desc	(Optional) Interface state reason detailed
desc	(Optional) Interface description
vrf	(Optional) Vrf membership
ip_addr	(Optional) IP address
mtu	(Optional) MTU
speed	(Optional) Speed
vlan	(Optional) Vlan
type	(Optional) Type
portmode	(Optional) Port mode
ratemode	(Optional) Interface port speed
portchan	(Optional) Port Channel Membership
proto	(Optional) Port Channel Protocol
interface_vfc	(Optional) Interface index
vsan_brief	(Optional) vsan brief
admin_mode	(Optional) admin mode
admin_trunk_mode	(Optional) admin trunk mode
status	(Optional) status
fcot_info	(Optional) fcot info
bind_info	(Optional) bind interface
bind_type	(Optional) bind type
bind_mac	(Optional) bind mac address
port_rate_mode	(Optional) rate mode
oper_speed	(Optional) speed
port_channel	(Optional) port channel number
ip_addr1	(Optional) IP address
TABLE_secondary_vlan	(Optional) Secondary vlan
sec_vlan	(Optional) Secondary vlan ID
sec_vlan_type	(Optional) Secondary vlan type
svi_admin_state	(Optional) svi admin state
svi_rsn_desc	(Optional) Interface state reason detailed

Command Mode

/exec

show interface brief

show interface <ifloop_brf> brief [ __readonly__ TABLE_interface <interface> <state> [ <desc> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifloop_brf	Enter interface type and number in module/slot format
brief	Show brief info of interface
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
desc	(Optional) Interface description

Command Mode

/exec

show interface brief

show interface <iftunnel_brf> brief [ __readonly__ TABLE_interface <interface> <state> <admin-state> { <tunnel-ipv4> | <tunnel-ipv6> } <mtu> <bandwidth> <encap-type> <keepalive-period> <keepalive-retries> { <src-ipv4> | <src-ipv6> } <src-intf> { <dest-ipv4> | <dest-ipv6> } <dest-hostname> <vrf_name> <tunnel_vrf_name> <wccp_header> <ttl_val> <tunnel_pmtud_age_time> <tunnel_pmtud_min_mtu> <tunnel_pmtud> <tunnel_pgm_mtu> <tunnel_rx_pkt_count> <tunnel_rx_byte_count> <tunnel_rx_rate> <tunnel_tx_pkt_count> <tunnel_tx_byte_count> <tunnel_tx_rate> <tunnel_clear_counter> ]

Syntax Description


show	Show running system information
interface	Show interface status and information
iftunnel_brf	Enter interface type and number in module/slot format
brief	Show brief info of interface
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
admin-state	(Optional)
tunnel-ipv4	(Optional) interface IPv4 address
mtu	(Optional) interface Maximum Transmission Unit
bandwidth	(Optional) interface Bandwidth in kilobits
encap-type	(Optional)
keepalive-period	(Optional) keealive period
keepalive-retries	(Optional) number of retries
src-ipv4	(Optional) tunnel source IPv4 address
src-intf	(Optional) tunnel source interface
dest-ipv4	(Optional) tunnel destination IPv4 address
dest-hostname	(Optional) tunnel destination hostname
vrf_name	(Optional) transport VRF name
tunnel_vrf_name	(Optional) tunnel VRF name
wccp_header	(Optional) wccp header
ttl_val	(Optional) tunnel time to live value
tunnel_pmtud_age_time	(Optional) tunnel path MTU discovery age time
tunnel_pmtud_min_mtu	(Optional) tunnel path MTU discovery min mtu
tunnel_pmtud	(Optional) tunnel path MTU discovered
tunnel_pgm_mtu	(Optional) tunnel actual programmed MTU
tunnel_rx_pkt_count	(Optional) total number of packets received
tunnel_rx_byte_count	(Optional) total number of bytes received
tunnel_rx_rate	(Optional) packets input rate per 5 minutes
tunnel_tx_pkt_count	(Optional) total number of packets transmitted
tunnel_tx_byte_count	(Optional) total number of bytes transmitted
tunnel_tx_rate	(Optional) packets transmitted per 5 minutes
tunnel_clear_counter	(Optional) Last clearing of show interface counters

Command Mode

/exec

show interface brief

show interface <ifmgmt_brf> brief [ __readonly__ TABLE_interface <interface> [ <vrf> ] <state> [ <ipv6_addr> ] [ <ip_addr> ] <mtu> <speed> [ <duplex> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifmgmt_brf	Enter interface type and number in module/slot format
brief	Show brief info of interface
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
vrf	(Optional) Vrf membership
state	(Optional) Interface state
ip_addr	(Optional) IP address
mtu	(Optional) MTU
speed	(Optional) Speed
duplex	(Optional) Duplex

Command Mode

/exec

show interface brief

show interface <ifrange> brief [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn> ] [ <state_rsn_desc> ] [ <overlay_mtu> ] [ <overlay_bandwidth> ] [ <overlay_vrf> ] [ <overlay_src_addr> ] [ <overlay_dst_addr> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifrange	Enter interface type and number
brief	Show brief info of interface
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
state_rsn	(Optional) Interface state reason
state_rsn_desc	(Optional) Interface state reason detailed
overlay_mtu	(Optional) MTU
overlay_bandwidth	(Optional) Bandwidth
overlay_vrf	(Optional) VRF
overlay_src_addr	(Optional) Source address
overlay_dst_addr	(Optional) Destination address

Command Mode

/exec

show interface brief

show interface <ifrange> brief [ __readonly__ TABLE_interface <interface> <state> [ <state_rsn> ] [ <state_rsn_desc> ] [ <admin_state> ] [ <nve_addr> ] [ <nve_vcid> ] [ <nve_mtu> ] [ <nve_bandwidth> ] [ <nve_vrf> ] [ <nve_src_addr> ] [ <nve_dst_addr> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifrange	Enter interface type and number
brief	Show brief info of interface
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
state_rsn	(Optional) Interface state reason
state_rsn_desc	(Optional) Interface state reason detailed
admin_state	(Optional) admin state
nve_addr	(Optional) Peer address
nve_vcid	(Optional) VCID
nve_mtu	(Optional) MTU
nve_bandwidth	(Optional) Bandwidth
nve_vrf	(Optional) VRF
nve_src_addr	(Optional) Source address
nve_dst_addr	(Optional) Destination address

Command Mode

/exec

show interface cable-diagnostics-tdr

show interface <ifid_tdr> cable-diagnostics-tdr [ __readonly__ TABLE_interface <interface> <speed> <distance1> <pair1_status> <distance2> <pair2_status> <distance3> <pair3_status> <distance4> <pair4_status> ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid_tdr	Enter interface type and number in module/slot format
cable-diagnostics-tdr	Show interface tdr test information
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
speed	(Optional) Speed
distance1	(Optional) Distance to fault for pair 1
distance2	(Optional) Distance to fault for pair 2
distance3	(Optional) Distance to fault for pair 3
distance4	(Optional) Distance to fault for pair 4
pair1_status	(Optional) Pair1 status
pair2_status	(Optional) Pair2 status
pair3_status	(Optional) Pair3 status
pair4_status	(Optional) Pair4 status

Command Mode

/exec

show interface capabilities

show interface <ifid_cap> capabilities [ __readonly__ { TABLE_interface_capabilities_if <interface> [ <min_speed> ] [ <max_speed> ] [ <FC-PH_version_high> ] [ <FC-PH_version_low> ] [ <recieve_data_max> ] [ <recieve_data_min> ] [ <transmit_data_max> ] [ <transmit_data_min> ] [ <class_service> ] [ <class_2> ] [ <class_3> ] [ <hold_time_max> ] [ <hold_time_min> ] [ <BB_state_change> ] [ <max_BB_state_change> ] [ <rate_mode_change> ] [ <rate_mode_cap> ] [ <recieve_BB_credit> ] [ <FX_recieve_BB_credit> ] [ <ISL_recieve_BB_credit> ] [ <shared_performance_buf_mod_supp> ] [ <dedicated_performance_buf_mod_supp> ] [ <fx_mode_perf_buf> ] [ <isl_mode_perf_buf> ] [ <out_of_order> ] [ <beacon_mode_config> ] [ <extended_B2B> ] [ <on_demand_port> ] } ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid_cap	Enter interface type and number in module/slot format
capabilities	Show interface capabilities information
__readonly__	(Optional)
TABLE_interface_capabilities_if	(Optional) interface capabilities if table
interface	(Optional) fc interface
min_speed	(Optional) Min Speed
max_speed	(Optional) Max Speed
FC-PH_version_high	(Optional) FC-PH version high
FC-PH_version_low	(Optional) FC-PH version low
recieve_data_max	(Optional) Receive data field size max
recieve_data_min	(Optional) Receive data field size min
transmit_data_max	(Optional) Transmit data field size max
transmit_data_min	(Optional) Transmit data field size min
class_service	(Optional) Classes of Service supported
class_2	(Optional) Class 2 sequential delivery
class_3	(Optional) Class 3 sequential delivery
hold_time_max	(Optional) Hold time max
hold_time_min	(Optional) Hold time min
BB_state_change	(Optional) BB state change notification
max_BB_state_change	(Optional) Maximum BB state change notifications
rate_mode_change	(Optional) Rate Mode change
rate_mode_cap	(Optional) Rate Mode Capabilities
recieve_BB_credit	(Optional) Receive BB Credit modification supported
FX_recieve_BB_credit	(Optional) FX mode Receive BB Credit (min/max/default)
ISL_recieve_BB_credit	(Optional) ISL mode Receive BB Credit (min/max/default)
shared_performance_buf_mod_supp	(Optional) Performance buffer modification supported shared
dedicated_performance_buf_mod_supp	(Optional) Performance buffer modification supported dedicated
fx_mode_perf_buf	(Optional) FX mode performance buffers
isl_mode_perf_buf	(Optional) ISL mode performance buffers
out_of_order	(Optional) Out of Service capable
beacon_mode_config	(Optional) Beacon mode configurable
extended_B2B	(Optional) Extended B2B credit capable
on_demand_port	(Optional) On demand port activation license supported

Command Mode

/exec

show interface capabilities

show interface <ifid_eth_cap> capabilities [ __readonly__ TABLE_interface <interface> <model> <type> <speed> <duplex> <trunk_encap> [ <dce_capable> ] <channel> <bcast_supp> <flo_ctrl> <rate_mode> <port_mode> [ <fast_start> ] <qos_scheduling> <cos_rewrite> <tos_rewrite> [ <inline_power> ] <span> <udld> [ <mdix> ] [ <tdr> ] <lnk_debounce> <lnk_debounce_time> <fex_fabric> <dot1q_tunnel> [ <pvlan_trunk_mode> ] [ <port_group> ] [ <port_group_members> ] <eee_capable> <pfc_capable> [ <speed_group_capable> ] <buffer_boost_capable> [ <bkout_capable> ] [ <macsec_capable> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid_eth_cap	Enter interface type and number in module/slot format
capabilities	Show interface capabilities information
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
model	(Optional) Model
type	(Optional) Type
speed	(Optional) Speed
duplex	(Optional) Duplex
trunk_encap	(Optional) Trunk encap. type
dce_capable	(Optional) DCE mode capable
channel	(Optional) Channel
bcast_supp	(Optional) Broadcast suppression
flo_ctrl	(Optional) Flowcontrol
rate_mode	(Optional) Rate mode
port_mode	(Optional) Port mode
fast_start	(Optional) Fast start
qos_scheduling	(Optional) QOS scheduling
cos_rewrite	(Optional) CoS rewrite
tos_rewrite	(Optional) ToS rewrite
inline_power	(Optional) Inline power
span	(Optional) SPAN
udld	(Optional) UDLD
mdix	(Optional) MDIX
tdr	(Optional) TDR
lnk_debounce	(Optional) Link debounce
lnk_debounce_time	(Optional) Link debounce time
fex_fabric	(Optional) FEX Fabric
dot1q_tunnel	(Optional) dot1q-tunnel
pvlan_trunk_mode	(Optional) Private-vlan trunk mode
port_group	(Optional) Port Group
port_group_members	(Optional) Port Group Members
eee_capable	(Optional) EEE (efficient-eth)
pfc_capable	(Optional) PFC Capable:
bkout_capable	(Optional) Breakout Capable:
buffer_boost_capable	(Optional) Buffer Boost Capable:
speed_group_capable	(Optional) Speed group capable
macsec_capable	(Optional) MACSEC capable

Command Mode

/exec

show interface capabilities

show interface capabilities [ __readonly__ TABLE_interface <interface> <model> <type> <speed> <duplex> <trunk_encap> [ <dce_capable> ] <channel> <bcast_supp> <flo_ctrl> <rate_mode> <port_mode> [ <fast_start> ] <qos_scheduling> <cos_rewrite> <tos_rewrite> [ <inline_power> ] <span> <udld> [ <mdix> ] [ <tdr> ] <lnk_debounce> <lnk_debounce_time> <fex_fabric> <dot1q_tunnel> [ <pvlan_trunk_mode> ] [ <port_group> ] [ <port_group_members> ] <eee_capable> <pfc_capable> [ <speed_group_capable> ] <buffer_boost_capable> [ <bkout_capable> ] [ <macsec_capable> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
capabilities	Show interface capabilities information
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
model	(Optional) Model
type	(Optional) Type
speed	(Optional) Speed
duplex	(Optional) Duplex
trunk_encap	(Optional) Trunk encap. type
dce_capable	(Optional) DCE mode capable
channel	(Optional) Channel
bcast_supp	(Optional) Broadcast suppression
flo_ctrl	(Optional) Flowcontrol
rate_mode	(Optional) Rate mode
port_mode	(Optional) Port mode
fast_start	(Optional) Fast start
qos_scheduling	(Optional) QOS scheduling
cos_rewrite	(Optional) CoS rewrite
tos_rewrite	(Optional) ToS rewrite
inline_power	(Optional) Inline power
span	(Optional) SPAN
udld	(Optional) UDLD
mdix	(Optional) MDIX
tdr	(Optional) TDR
lnk_debounce	(Optional) Link debounce
lnk_debounce_time	(Optional) Link debounce time
fex_fabric	(Optional) FEX Fabric
dot1q_tunnel	(Optional) dot1q-tunnel
pvlan_trunk_mode	(Optional) Private-vlan trunk mode
port_group	(Optional) Port Group
port_group_members	(Optional) Port Group Members
eee_capable	(Optional) EEE (efficient-eth)
pfc_capable	(Optional) PFC Capable:
bkout_capable	(Optional) Breakout Capable:
buffer_boost_capable	(Optional) Buffer Boost Capable:
speed_group_capable	(Optional) Speed group capable
macsec_capable	(Optional) MACSEC capable

Command Mode

/exec

show interface counters

show interface counters [ module <module> ] [ __readonly__ { TABLE_rx_counters <interface_rx> [ <eth_inpkts> ] [ <fc_inframes> ] [ <eth_inbytes> ] [ <fc_inbytes> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_l3in_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_bcastpkts> ] } { TABLE_tx_counters <interface_tx> [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_l3out_bytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_bcastpkts> ] } ]

Syntax Description


show	Show running system information
interface	Show interface status and information
counters	Show interface counters
module	(Optional) Limit display to interfaces on module
module	(Optional) Enter module number
__readonly__	(Optional) Read Only
interface_rx	(Optional) Interface index rx
interface_tx	(Optional) Interface index tx
TABLE_rx_counters	(Optional) show Rx counters
TABLE_tx_counters	(Optional) show Tx counters
eth_inpkts	(Optional) Packets input
fc_inframes	(Optional) Frames input fc
eth_inbytes	(Optional) Bytes input
fc_inbytes	(Optional) Bytes input fc
eth_inucast	(Optional) Unicasts
eth_inmcast	(Optional) Multicasts
eth_inbcast	(Optional) Broadcasts
eth_outpkts	(Optional) Packets output
eth_outbytes	(Optional) Bytes output
eth_outucast	(Optional) Unicasts
eth_outmcast	(Optional) Multicasts
eth_outbcast	(Optional) Broadcasts
eth_l3in_bytes	(Optional) L3 Rx bytes
eth_l3in_ucastpkts	(Optional) L3 Rx Unicast pkts
eth_l3in_mcastpkts	(Optional) L3 Rx Multicast pkts
eth_l3in_bcastpkts	(Optional) L3 Rx Broadcast pkts
eth_l3out_bytes	(Optional) L3 Tx bytes
eth_l3out_ucastpkts	(Optional) L3 Tx Unicast pkts
eth_l3out_mcastpkts	(Optional) L3 Tx Multicast pkts
eth_l3out_bcastpkts	(Optional) L3 Tx Broadcast pkts

Command Mode

/exec

show interface counters

show interface <ifid_ctrs> counters [ brief ] [ __readonly__ [ { TABLE_counters <sfp> { TABLE_input_rate <bit_per_sec> <bytes_per_sec> <frames_per_sec> } { TABLE_output_rate <bit_per_sec> <bytes_per_sec> <frames_per_sec> } { TABLE_input <frames> <bytes> [ <class_2_frames> ] [ <class_2_bytes> ] [ <class_3_frames> ] [ <class_3_bytes> ] [ <class_f_frames> ] [ <class_f_bytes> ] [ <class_2_3_frames> ] <discards> <errors> <crc_fcs> <unknown_class> <too_long> <too_short> } { TABLE_output <frames> <bytes> [ <class_2_frames> ] [ <class_2_bytes> ] [ <class_3_frames> ] [ <class_3_bytes> ] [ <class_f_frames> ] [ <class_f_bytes> ] [ <class_2_3_frames> ] [ <discards> ] [ <errors> ] [ <crc_fcs> ] } [ <timeout_discards> ] [ <credit_loss> ] [ <input_ols> ] [ <input_lrr> ] [ <input_nos> ] [ <input_loop_inits> ] [ <output_ols> ] [ <output_lrr> ] [ <output_nos> ] [ <output_loop_inits> ] [ <link_faliures> ] [ <sync_loss> ] [ <signal_loss> ] [ <b2b_transmit> ] [ <b2b_receive> ] [ <txwait> ] [ <tx_credit_unavbl> ] [ <b2b_receive_remain> ] [ <b2b_transmit_remain> ] [ <low_priority_b2b_remain> ] [ <off_seq_err_rcvd> ] [ <broadcast_frames> ] [ <errors> ] [ <queue_drops> ] [ <if_down_drops> ] [ <red_drops> ] [ <bad_ether_type_drops> ] [ <bad_protocol_drops> ] [ <arp_drops> ] [ <reass_frames> ] [ <timestamp_error> ] [ <rx_b2b_perf_buff> ] [ <rx_b2b_credit> ] [ <tx_b2b_credit> ] [ <tx_b2b_low_pri_cre> ] [ <time_last_cleared> ] } ] [ { TABLE_counters_brief <sfp> <fc_input_rate> <fc_frames_in> <fc_output_rate> <fc_frames_out> } ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid_ctrs	Enter interface type and number in module/slot format
counters	Show interface counters
brief	(Optional) Show interface counters in brief
__readonly__	(Optional) Readonly
TABLE_counters	(Optional) Table counters
sfp	(Optional) SFP
TABLE_input_rate	(Optional) Input rate
bit_per_sec	(Optional) Input rate bits per second
bytes_per_sec	(Optional) Input rate bytes per second
frames_per_sec	(Optional) Input rate frames per second
TABLE_output_rate	(Optional) Output rate
bit_per_sec	(Optional) Output rate bits per second
bytes_per_sec	(Optional) Output rate bytes per second
frames_per_sec	(Optional) Output rate frames per second
TABLE_input	(Optional) Input values
frames	(Optional) Frames
bytes	(Optional) Bytes
class_2_frames	(Optional) Class 2 frames
class_2_bytes	(Optional) Class 2 bytes
class_3_frames	(Optional) Class 3 frames
class_3_bytes	(Optional) Class 3 bytes
class_f_frames	(Optional) Class f frames
class_f_bytes	(Optional) Class f bytes
class_2_3_frames	(Optional) Class 2/3 Frames
discards	(Optional) Discards
errors	(Optional) Errors
crc_fcs	(Optional) CRC/FCS
unknown_class	(Optional) Unknown Class
too_long	(Optional) Frames too long
too_short	(Optional) Frames too short
TABLE_output	(Optional) Output Values
frames	(Optional) Frames
bytes	(Optional) Bytes
class_2_frames	(Optional) Class 2 frames
class_2_bytes	(Optional) Class 2 bytes
class_3_frames	(Optional) Class 3 frames
class_3_bytes	(Optional) Class 3 bytes
class_f_frames	(Optional) Class f frames
class_f_bytes	(Optional) Class f bytes
class_2_3_frames	(Optional) Class 2/3 frames
discards	(Optional) Discards
errors	(Optional) Errors
crc_fcs	(Optional) CRC/FCS
timeout_discards	(Optional) Timeout Discards
credit_loss	(Optional) Credit Loss
input_ols	(Optional) input ols
input_lrr	(Optional) input LRR
input_nos	(Optional) input NOS
input_loop_inits	(Optional) input loop inits
output_ols	(Optional) output OLS
output_lrr	(Optional) output LRR
output_nos	(Optional) output NOS
output_loop_inits	(Optional) output loop inits
link_faliures	(Optional) link faliures
sync_loss	(Optional) Sync loss
signal_loss	(Optional) Signal loss
b2b_transmit	(Optional) B2B transmit
b2b_receive	(Optional) B2B receive
txwait	(Optional) TxWait
tx_credit_unavbl	(Optional) Tx credit unavaliable
b2b_receive_remain	(Optional) B2B receive remain
b2b_transmit_remain	(Optional) B2B transmit remain
low_priority_b2b_remain	(Optional) Low priority B2B credit remaining
time_last_cleared	(Optional) Last time cleared
broadcast_frames	(Optional) Broadcast frames
errors	(Optional) Errors
queue_drops	(Optional) Queue drops
if_down_drops	(Optional) If down drops
red_drops	(Optional) Red drops
bad_ether_type_drops	(Optional) Bad ether type drops
bad_protocol_drops	(Optional) Bad Protocol Drops
arp_drops	(Optional) Arp Drops
timestamp_error	(Optional) Timestamp Error
reass_frames	(Optional) Reass Frames
rx_b2b_perf_buff	(Optional) RX B2B performance buffer
rx_b2b_credit	(Optional) RX B2B credit remaining
tx_b2b_credit	(Optional) TX B2B credit remaining
tx_b2b_low_pri_cre	(Optional) TX B2B low priority Credit
off_seq_err_rcvd	(Optional) Offset Sequence Error Received
TABLE_counters_brief	(Optional) Table counters brief
sfp	(Optional) FC id
fc_input_rate	(Optional) Input rate
fc_frames_in	(Optional) Frames in
fc_output_rate	(Optional) Output rate
fc_frames_out	(Optional) Frames out

Command Mode

/exec

show interface counters

show interface <ifid_ctr> counters [ snmp ] [ __readonly__ { TABLE_rx_counters <interface_rx> [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] } { TABLE_tx_counters <interface_tx> [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] } ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid_ctr	Enter interface type and number in module/slot format
counters	Show interface counters
snmp	(Optional) Show SNMP MIB values
__readonly__	(Optional) Read Only
interface_rx	(Optional) Interface index rx
interface_tx	(Optional) Interface index tx
TABLE_rx_counters	(Optional) show Rx counters
TABLE_tx_counters	(Optional) show Tx counters
eth_inpkts	(Optional) Packets input
eth_inbytes	(Optional) Bytes input
eth_inucast	(Optional) Unicasts
eth_inmcast	(Optional) Multicasts
eth_inbcast	(Optional) Broadcasts
eth_outpkts	(Optional) Packets output
eth_outbytes	(Optional) Bytes output
eth_outucast	(Optional) Unicasts
eth_outmcast	(Optional) Multicasts
eth_outbcast	(Optional) Broadcasts

Command Mode

/exec

show interface counters

show interface counters [ non-zero ] [ __readonly__ { TABLE_rx_counters <interface_rx> [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_l3in_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_bcastpkts> ] } { TABLE_tx_counters <interface_tx> [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_l3out_bytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_bcastpkts> ] } ]

Syntax Description


show	Show running system information
interface	Show interface status and information
counters	Show interface counters
non-zero	(Optional) To display only the non-zero counter values
__readonly__	(Optional) Read Only
interface_rx	(Optional) Interface index rx
interface_tx	(Optional) Interface index tx
TABLE_rx_counters	(Optional) show Rx counters
TABLE_tx_counters	(Optional) show Tx counters
eth_inpkts	(Optional) Packets input
eth_inbytes	(Optional) Bytes input
eth_inucast	(Optional) Unicasts
eth_inmcast	(Optional) Multicasts
eth_inbcast	(Optional) Broadcasts
eth_outpkts	(Optional) Packets output
eth_outbytes	(Optional) Bytes output
eth_outucast	(Optional) Unicasts
eth_outmcast	(Optional) Multicasts
eth_outbcast	(Optional) Broadcasts
eth_l3in_bytes	(Optional) L3 Rx bytes
eth_l3in_ucastpkts	(Optional) L3 Rx Unicast pkts
eth_l3in_mcastpkts	(Optional) L3 Rx Multicast pkts
eth_l3in_bcastpkts	(Optional) L3 Rx Broadcast pkts
eth_l3out_bytes	(Optional) L3 Tx bytes
eth_l3out_ucastpkts	(Optional) L3 Tx Unicast pkts
eth_l3out_mcastpkts	(Optional) L3 Tx Multicast pkts
eth_l3out_bcastpkts	(Optional) L3 Tx Broadcast pkts

Command Mode

/exec

show interface counters

show interface <ifeth_ctr> counters [ snmp ] [ __readonly__ { TABLE_rx_counters <interface_rx> [ <eth_inbytes> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_l3in_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_bcastpkts> ] } { TABLE_tx_counters <interface_tx> [ <eth_outbytes> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_l3out_bytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_bcastpkts> ] } ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifeth_ctr	Enter interface type and number in module/slot format
counters	Show interface counters
snmp	(Optional) Show SNMP MIB values
__readonly__	(Optional) Read Only
TABLE_rx_counters	(Optional) show Rx counters
interface_rx	(Optional) Interface index rx
eth_inbytes	(Optional) Bytes input
eth_inucast	(Optional) Unicasts input
eth_inmcast	(Optional) Multicasts input
eth_inbcast	(Optional) Broadcasts input
eth_l3in_bytes	(Optional) L3 Rx bytes
eth_l3in_ucastpkts	(Optional) L3 Rx Unicast pkts
eth_l3in_mcastpkts	(Optional) L3 Rx Multicast pkts
eth_l3in_bcastpkts	(Optional) L3 Rx Broadcast pkts
TABLE_tx_counters	(Optional) show Tx counters
interface_tx	(Optional) Interface index tx
eth_outbytes	(Optional) Bytes output
eth_outucast	(Optional) Unicasts output
eth_outmcast	(Optional) Multicasts output
eth_outbcast	(Optional) Broadcasts output
eth_l3out_bytes	(Optional) L3 Tx bytes
eth_l3out_ucastpkts	(Optional) L3 Tx Unicast pkts
eth_l3out_mcastpkts	(Optional) L3 Tx Multicast pkts
eth_l3out_bcastpkts	(Optional) L3 Tx Broadcast pkts

Command Mode

/exec

show interface counters

show interface <ifrange> counters [ __readonly__ TABLE_interface <interface> [ <overlay_load_interval> ] [ <overlay_rx_ucastpkts> ] [ <overlay_rx_ucastbytes> ] [ <overlay_rx_mcastpkts> ] [ <overlay_rx_mcastbytes> ] [ <overlay_rx_pkts> ] [ <overlay_rx_bytes> ] [ <overlay_rx_bcastpkts> ] [ <overlay_rx_bcastbytes> ] [ <overlay_rx_bitrate> ] [ <overlay_rx_pktrate> ] [ <overlay_tx_ucastpkts> ] [ <overlay_tx_ucastbytes> ] [ <overlay_tx_mcastpkts> ] [ <overlay_tx_mcastbytes> ] [ <overlay_tx_bcastpkts> ] [ <overlay_tx_bcastbytes> ] [ <overlay_tx_pkts> ] [ <overlay_tx_bytes> ] [ <overlay_tx_bitrate> ] [ <overlay_tx_pktrate> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifrange	Enter interface type and number
counters	Show interface counters
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
overlay_load_interval	(Optional) Load interval
overlay_rx_ucastpkts	(Optional) Received ucast pkts
overlay_rx_ucastbytes	(Optional) Received ucast bytes
overlay_rx_mcastpkts	(Optional) Received mcast pkts
overlay_rx_mcastbytes	(Optional) Received mcast bytes
overlay_rx_bcastpkts	(Optional) Received bcast pkts
overlay_rx_bcastbytes	(Optional) Received bcast bytes
overlay_rx_pkts	(Optional) Total received pkts
overlay_rx_bytes	(Optional) Total received bytes
overlay_rx_bitrate	(Optional) Receive bit rate
overlay_rx_pktrate	(Optional) Receive pkt rate
overlay_tx_ucastpkts	(Optional) Trasnmitted ucast pkts
overlay_tx_ucastbytes	(Optional) Trasnmitted ucast bytes
overlay_tx_mcastpkts	(Optional) Trasnmitted mcast pkts
overlay_tx_mcastbytes	(Optional) Trasnmitted mcast bytes
overlay_tx_bcastpkts	(Optional) Trasnmitted bcast pkts
overlay_tx_bcastbytes	(Optional) Trasnmitted bcast bytes
overlay_tx_pkts	(Optional) Total transmitted pkts
overlay_tx_bytes	(Optional) Total transmitted bytes
overlay_tx_bitrate	(Optional) Transmit bit rate
overlay_tx_pktrate	(Optional) Transmit pkt rate

Command Mode

/exec

show interface counters

show interface <ifrange> counters [ __readonly__ { TABLE_nve_counters <interface> [ <ucast_inbytes> ] [ <ucast_inpkts> ] [ <ucast_outbytes> ] [ <ucast_outpkts> ] [ <mcast_inbytes> ] [ <mcast_inpkts> ] [ <mcast_outbytes> ] [ <mcast_outpkts> ] } ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifrange	Enter interface type and number
counters	Show interface counters
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_nve_counters	(Optional) show interface
ucast_inbytes	(Optional) ucast bytes input
ucast_inpkts	(Optional) ucast packets input
ucast_outbytes	(Optional) ucast bytes output
ucast_outpkts	(Optional) ucast packets output
mcast_inbytes	(Optional) mcast bytes input
mcast_inpkts	(Optional) mcast packets input
mcast_outbytes	(Optional) mcast bytes output
mcast_outpkts	(Optional) mcast packets output

Command Mode

/exec

show interface counters brief

show interface counters brief [ <counter_val> ] [ __readonly__ TABLE_interface <interface> [ <eth_inrate1> ] [ <eth_inframes1> ] [ <eth_outrate1> ] [ <eth_outframes1> ] [ <eth_load_intv1> ] [ <eth_inrate2> ] [ <eth_inframes2> ] [ <eth_outrate2> ] [ <eth_outframes2> ] [ <eth_load_intv2> ] [ <eth_inrate3> ] [ <eth_inframes3> ] [ <eth_outrate3> ] [ <eth_outframes3> ] [ <eth_load_intv3> ] [ <fc_input_rate> ] [ <fc_frames_in> ] [ <fc_output_rate> ] [ <fc_frames_out> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
counters	Show interface counters
brief	Show interface counters in brief
counter_val	(Optional) Specify a single load interval id to show the rates
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
eth_inrate1	(Optional) interval 1 input rate in mbps
eth_inframes1	(Optional) interval 1 input rate in frames (pkts)
eth_outrate1	(Optional) interval 1 output rate in mbps
eth_outframes1	(Optional) interval 1 output rate in output frames (pkts)
eth_load_intv1	(Optional) interval 1 timer value in sec
eth_inrate2	(Optional) interval 2 input rate in mbps
eth_inframes2	(Optional) interval 2 input rate in frames (pkts)
eth_outrate2	(Optional) interval 2 output rate in mbps
eth_outframes2	(Optional) interval 2 output rate in output frames (pkts)
eth_load_intv2	(Optional) interval 2 timer value in sec
eth_inrate3	(Optional) interval 3 input rate in mbps
eth_inframes3	(Optional) interval 3 input rate in frames (pkts)
eth_outrate3	(Optional) interval 3 output rate in mbps
eth_outframes3	(Optional) interval 3 output rate in output frames (pkts)
eth_load_intv3	(Optional) interval 3 timer value in sec
fc_input_rate	(Optional) Input rate
fc_frames_in	(Optional) Frames in
fc_output_rate	(Optional) Output rate
fc_frames_out	(Optional) Frames out

Command Mode

/exec

show interface counters brief

show interface <ifeth_ctr_brf> counters brief [ <counter_val> ] [ __readonly__ TABLE_interface <interface> <eth_inrate1> <eth_inframes1> <eth_outrate1> <eth_outframes1> <eth_load_intv1> <eth_inrate2> <eth_inframes2> <eth_outrate2> <eth_outframes2> <eth_load_intv2> [ <eth_inrate3> <eth_inframes3> <eth_outrate3> <eth_outframes3> <eth_load_intv3> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifeth_ctr_brf	Enter interface type and number in module/slot format
counters	Show interface counters
brief	Show interface counters in brief
counter_val	(Optional) Specify a single load interval id to show the rates
__readonly__	(Optional) Read Only
TABLE_interface	(Optional) show interface
interface	(Optional) Interface index
eth_inrate1	(Optional) interval 1 input rate in mbps
eth_inframes1	(Optional) interval 1 input rate in frames (pkts)
eth_outrate1	(Optional) interval 1 output rate in mbps
eth_outframes1	(Optional) interval 1 output rate in output frames (pkts)
eth_load_intv1	(Optional) interval 1 timer value in sec
eth_inrate2	(Optional) interval 2 input rate in mbps
eth_inframes2	(Optional) interval 2 input rate in frames (pkts)
eth_outrate2	(Optional) interval 2 output rate in mbps
eth_outframes2	(Optional) interval 2 output rate in output frames (pkts)
eth_load_intv2	(Optional) interval 2 timer value in sec
eth_inrate3	(Optional) interval 3 input rate in mbps
eth_inframes3	(Optional) interval 3 input rate in frames (pkts)
eth_outrate3	(Optional) interval 3 output rate in mbps
eth_outframes3	(Optional) interval 3 output rate in output frames (pkts)
eth_load_intv3	(Optional) interval 3 timer value in sec

Command Mode

/exec

show interface counters detailed

show interface <ifmgmt_ctr_dtl> counters detailed [ __readonly__ TABLE_interface <interface> [ <vdc_lvl_in_pkts> ] [ <vdc_lvl_in_bytes> ] [ <vdc_lvl_in_ucast> ] [ <vdc_lvl_in_mcast> ] [ <vdc_lvl_in_bcast> ] [ <vdc_lvl_in_bps> ] [ <vdc_lvl_in_pps> ] [ <vdc_lvl_in_avg_pkts> ] [ <vdc_lvl_in_avg_bytes> ] [ <vdc_lvl_out_pkts> ] [ <vdc_lvl_out_bytes> ] [ <vdc_lvl_out_ucast> ] [ <vdc_lvl_out_mcast> ] [ <vdc_lvl_out_bcast> ] [ <vdc_lvl_out_bps> ] [ <vdc_lvl_out_pps> ] [ <vdc_lvl_out_avg_pkts> ] [ <vdc_lvl_out_avg_bytes> ] [ <mgmt_in_pkts> ] [ <mgmt_in_bytes> ] [ <mgmt_in_mcast> ] [ <mgmt_in_compressed> ] [ <mgmt_in_errors> ] [ <mgmt_in_frame> ] [ <mgmt_in_overrun> ] [ <mgmt_in_fifo> ] [ <mgmt_out_pkts> ] [ <mgmt_out_bytes> ] [ <mgmt_out_underruns> ] [ <mgmt_out_errors> ] [ <mgmt_out_collisions> ] [ <mgmt_out_fifo> ] [ <mgmt_out_carrier> ] [ <mgmt_align_err> ] [ <mgmt_fcs_err> ] [ <mgmt_xmit_err> ] [ <mgmt_rcv_err> ] [ <mgmt_undersize> ] [ <mgmt_outdisc> ] [ <mgmt_single_col> ] [ <mgmt_multi_col> ] [ <mgmt_late_col> ] [ <mgmt_excess_col> ] [ <mgmt_carri_sen> ] [ <mgmt_runts> ] [ <mgmt_giants> ] [ <mgmt_sqetest_err> ] [ <mgmt_deferred_tx> ] [ <mgmt_inmactx_err> ] [ <mgmt_inmacrx_err> ] [ <mgmt_symbol_err> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifmgmt_ctr_dtl	Enter interface type and number in module/slot format
counters	Show interface counters
detailed	Show only non-zero counters
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
vdc_lvl_in_pkts	(Optional) VDC level input packets
vdc_lvl_in_bytes	(Optional) VDC level input bytes
vdc_lvl_in_ucast	(Optional) VDC level input unicast packets
vdc_lvl_in_mcast	(Optional) VDC level input multicast packets
vdc_lvl_in_bcast	(Optional) VDC level input broadcast packets
vdc_lvl_in_bps	(Optional) VDC level input bytes per second
vdc_lvl_in_pps	(Optional) VDC level input packets per second
vdc_lvl_in_avg_pkts	(Optional) VDC level average input packets
vdc_lvl_in_avg_bytes	(Optional) VDC level average input bytes
vdc_lvl_out_pkts	(Optional) VDC level output packets
vdc_lvl_out_bytes	(Optional) VDC level output bytes
vdc_lvl_out_ucast	(Optional) VDC level output unicast packets
vdc_lvl_out_mcast	(Optional) VDC level output multicast packets
vdc_lvl_out_bcast	(Optional) VDC level output broadcast packets
vdc_lvl_out_bps	(Optional) VDC level output bytes per second
vdc_lvl_out_pps	(Optional) VDC level output packets per second
vdc_lvl_out_avg_pkts	(Optional) VDC level average output packets
vdc_lvl_out_avg_bytes	(Optional) VDC level average output bytes
mgmt_in_pkts	(Optional) Input packets
mgmt_in_bytes	(Optional) Input bytes
mgmt_in_mcast	(Optional) Input multicast frames
mgmt_in_compressed	(Optional) Input compressed
mgmt_in_errors	(Optional) Input errors
mgmt_in_frame	(Optional) Input frame errors
mgmt_in_overrun	(Optional) Input overrun
mgmt_in_fifo	(Optional) Input fifo
mgmt_out_pkts	(Optional) Output packets
mgmt_out_bytes	(Optional) Output bytes
mgmt_out_underruns	(Optional) Output overruns
mgmt_out_errors	(Optional) Output errors
mgmt_out_collisions	(Optional) Output collisions
mgmt_out_fifo	(Optional) Output fifo
mgmt_out_carrier	(Optional) Output carrier errors
mgmt_align_err	(Optional) Align error
mgmt_fcs_err	(Optional) FCS error
mgmt_xmit_err	(Optional) Transmit error
mgmt_rcv_err	(Optional) Receive error
mgmt_undersize	(Optional) Undersize
mgmt_outdisc	(Optional) Out discard
mgmt_single_col	(Optional) Single collision
mgmt_multi_col	(Optional) Multiple collision
mgmt_late_col	(Optional) Late collision
mgmt_excess_col	(Optional) Excess collision
mgmt_carri_sen	(Optional) Carrier sense
mgmt_runts	(Optional) Runts
mgmt_giants	(Optional) Giants
mgmt_sqetest_err	(Optional) SQETest error
mgmt_deferred_tx	(Optional) Deferred tx
mgmt_inmactx_err	(Optional) In MAC tx
mgmt_inmacrx_err	(Optional) In MAC rx
mgmt_symbol_err	(Optional) Symbol error

Command Mode

/exec

show interface counters detailed

show interface counters detailed [ snmp ] [ __readonly__ TABLE_interface <interface> [ <vdc_lvl_in_pkts> ] [ <vdc_lvl_in_bytes> ] [ <vdc_lvl_in_ucast> ] [ <vdc_lvl_in_mcast> ] [ <vdc_lvl_in_bcast> ] [ <vdc_lvl_in_bps> ] [ <vdc_lvl_in_pps> ] [ <vdc_lvl_in_avg_pkts> ] [ <vdc_lvl_in_avg_bytes> ] [ <vdc_lvl_out_pkts> ] [ <vdc_lvl_out_bytes> ] [ <vdc_lvl_out_ucast> ] [ <vdc_lvl_out_mcast> ] [ <vdc_lvl_out_bcast> ] [ <vdc_lvl_out_bps> ] [ <vdc_lvl_out_pps> ] [ <vdc_lvl_out_avg_pkts> ] [ <vdc_lvl_out_avg_bytes> ] [ <mgmt_in_pkts> ] [ <mgmt_in_bytes> ] [ <mgmt_in_mcast> ] [ <mgmt_in_compressed> ] [ <mgmt_in_errors> ] [ <mgmt_in_frame> ] [ <mgmt_in_overrun> ] [ <mgmt_in_fifo> ] [ <mgmt_out_pkts> ] [ <mgmt_out_bytes> ] [ <mgmt_out_underruns> ] [ <mgmt_out_errors> ] [ <mgmt_out_collisions> ] [ <mgmt_out_fifo> ] [ <mgmt_out_carrier> ] [ <mgmt_align_err> ] [ <mgmt_fcs_err> ] [ <mgmt_xmit_err> ] [ <mgmt_rcv_err> ] [ <mgmt_undersize> ] [ <mgmt_outdisc> ] [ <mgmt_single_col> ] [ <mgmt_multi_col> ] [ <mgmt_late_col> ] [ <mgmt_excess_col> ] [ <mgmt_carri_sen> ] [ <mgmt_runts> ] [ <mgmt_giants> ] [ <mgmt_sqetest_err> ] [ <mgmt_deferred_tx> ] [ <mgmt_inmactx_err> ] [ <mgmt_inmacrx_err> ] [ <mgmt_symbol_err> ] [ <loop_in_pkts> ] [ <loop_in_bytes> ] [ <loop_in_mcast> ] [ <loop_in_compressed> ] [ <loop_in_errors> ] [ <loop_in_frame> ] [ <loop_in_overrun> ] [ <loop_in_fifo> ] [ <loop_out_pkts> ] [ <loop_out_bytes> ] [ <loop_out_underruns> ] [ <loop_out_errors> ] [ <loop_out_collisions> ] [ <loop_out_fifo> ] [ <loop_out_carriers> ] [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_inrate1_summary_bits> ] [ <eth_inrate1_summary_pkts> ] [ <eth_outrate1_summary_bits> ] [ <eth_outrate1_summary_pkts> ] [ <eth_load_interval2_rx> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_load_interval2_tx> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_inrate2_summary_bits> ] [ <eth_inrate2_summary_pkts> ] [ <eth_outrate2_summary_bits> ] [ <eth_outrate2_summary_pkts> ] [ <eth_load_interval3_rx> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_load_interval3_tx> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_inrate3_summary_bits> ] [ <eth_inrate3_summary_pkts> ] [ <eth_outrate3_summary_bits> ] [ <eth_outrate3_summary_pkts> ] [ <eth_inpkts> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_ingiants> ] [ <eth_inbytes> ] [ <eth_storm_supp> ] [ <eth_inb64> ] [ <eth_inb65_127> ] [ <eth_inb128_255> ] [ <eth_inb256_511> ] [ <eth_inb512_1023> ] [ <eth_inb1024_1518> ] [ <eth_inb1519_1548> ] [ <eth_intrunk> ] [ <eth_outpkts> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_outgiants> ] [ <eth_outbytes> ] [ <eth_outb64> ] [ <eth_outb65_127> ] [ <eth_outb128_255> ] [ <eth_outb256_511> ] [ <eth_outb512_1023> ] [ <eth_outb1024_1518> ] [ <eth_outb1519_1548> ] [ <eth_outtrunk> ] [ <eth_nobuf> ] [ <eth_runts> ] [ <eth_crc> ] [ <eth_ecc> ] [ <eth_overrun> ] [ <eth_underrun> ] [ <eth_ignored> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_in_ifdown_drops> ] [ <eth_coll> ] [ <eth_latecoll> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_babbles> ] [ <eth_watchdog> ] [ <eth_dribble> ] [ <eth_inerr> ] [ <eth_outerr> ] [ <eth_deferred> ] [ <eth_jabbers> ] [ <eth_shortframe> ] [ <eth_single_coll> ] [ <eth_multi_coll> ] [ <eth_excess_coll> ] [ <eth_indiscard> ] [ <eth_bad_encap> ] [ <eth_outcrc> ] [ <eth_symbol> ] [ <eth_out_drops> ] [ <eth_bpdu_outlost> ] [ <eth_cos0_outlost> ] [ <eth_cos1_outlost> ] [ <eth_cos2_outlost> ] [ <eth_cos3_outlost> ] [ <eth_cos4_outlost> ] [ <eth_cos5_outlost> ] [ <eth_cos6_outlost> ] [ <eth_cos7_outlost> ] [ <eth_inpause> ] [ <eth_outpause> ] [ <eth_resets> ] [ <eth_sqetest> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_ipmcast> ] [ <eth_inhw_switched> ] [ <eth_insw_switched> ] [ <eth_throtles> ] [ <eth_frame> ] [ <eth_outhw_switched> ] [ <eth_outsw_switched> ] [ <eth_buffail> ] [ <eth_bufswapped> ] [ <eth_arpdrops> ] [ <eth_out_ifdown_drops> ] [ <eth_fcoe_in_pkts> ] [ <eth_fcoe_in_octets> ] [ <eth_fcoe_out_pkts> ] [ <eth_fcoe_out_octets> ] [ <eth_nfcoe_in_pkts> ] [ <eth_nfcoe_in_octets> ] [ <eth_nfcoe_out_pkts> ] [ <eth_nfcoe_out_octets> ] [ <svi_routed_pkts_in> ] [ <svi_routed_bytes_in> ] [ <svi_routed_pkts_out> ] [ <svi_routed_bytes_out> ] [ <svi_ucast_pkts_in> ] [ <svi_ucast_bytes_in> ] [ <svi_mcast_pkts_in> ] [ <svi_mcast_bytes_in> ] [ <svi_ucast_pkts_out> ] [ <svi_ucast_bytes_out> ] [ <svi_mcast_pkts_out> ] [ <svi_mcast_bytes_out> ] [ <svi_ipv4_ucast_pkts_in> ] [ <svi_ipv4_ucast_bytes_in> ] [ <svi_ipv4_ucast_pkts_out> ] [ <svi_ipv4_ucast_bytes_out> ] [ <svi_ipv4_mcast_pkts_in> ] [ <svi_ipv4_mcast_bytes_in> ] [ <svi_ipv4_mcast_pkts_out> ] [ <svi_ipv4_mcast_bytes_out> ] [ <svi_ipv6_ucast_pkts_in> ] [ <svi_ipv6_ucast_bytes_in> ] [ <svi_ipv6_ucast_pkts_out> ] [ <svi_ipv6_ucast_bytes_out> ] [ <svi_ipv6_mcast_pkts_in> ] [ <svi_ipv6_mcast_bytes_in> ] [ <svi_ipv6_mcast_pkts_out> ] [ <svi_ipv6_mcast_bytes_out> ] [ <svi_average_input_bits> ] [ <svi_average_input_packets> ] [ <svi_average_output_bits> ] [ <svi_average_output_packets> ] [ <svi_rate_in_mins> ] [ <svi_time_last_cleared> ] [ <svi_tx_load> ] [ <svi_rx_load> ] [ <svi_reliability> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
counters	Show interface counters
detailed	Show only non-zero counters
snmp	(Optional) Show SNMP MIB values
__readonly__	(Optional) Read Only
TABLE_interface	(Optional) show interface
interface	(Optional) Interface index
vdc_lvl_in_pkts	(Optional) VDC level input packets
vdc_lvl_in_bytes	(Optional) VDC level input bytes
vdc_lvl_in_ucast	(Optional) VDC level input unicast packets
vdc_lvl_in_mcast	(Optional) VDC level input multicast packets
vdc_lvl_in_bcast	(Optional) VDC level input broadcast packets
vdc_lvl_in_bps	(Optional) VDC level input bytes per second
vdc_lvl_in_pps	(Optional) VDC level input packets per second
vdc_lvl_in_avg_pkts	(Optional) VDC level average input packets
vdc_lvl_in_avg_bytes	(Optional) VDC level average input bytes
vdc_lvl_out_pkts	(Optional) VDC level output packets
vdc_lvl_out_bytes	(Optional) VDC level output bytes
vdc_lvl_out_ucast	(Optional) VDC level output unicast packets
vdc_lvl_out_mcast	(Optional) VDC level output multicast packets
vdc_lvl_out_bcast	(Optional) VDC level output broadcast packets
vdc_lvl_out_bps	(Optional) VDC level output bytes per second
vdc_lvl_out_pps	(Optional) VDC level output packets per second
vdc_lvl_out_avg_pkts	(Optional) VDC level average output packets
vdc_lvl_out_avg_bytes	(Optional) VDC level average output bytes
mgmt_in_pkts	(Optional) Input packets
mgmt_in_bytes	(Optional) Input bytes
mgmt_in_mcast	(Optional) Input multicast frames
mgmt_in_compressed	(Optional) Input compressed
mgmt_in_errors	(Optional) Input errors
mgmt_in_frame	(Optional) Input frame errors
mgmt_in_overrun	(Optional) Input overrun
mgmt_in_fifo	(Optional) Input fifo
mgmt_out_pkts	(Optional) Output packets
mgmt_out_bytes	(Optional) Output bytes
mgmt_out_underruns	(Optional) Output overruns
mgmt_out_errors	(Optional) Output errors
mgmt_out_collisions	(Optional) Output collisions
mgmt_out_fifo	(Optional) Output fifo
mgmt_out_carrier	(Optional) Output carrier errors
mgmt_align_err	(Optional) Align error
mgmt_fcs_err	(Optional) FCS error
mgmt_xmit_err	(Optional) Transmit error
mgmt_rcv_err	(Optional) Receive error
mgmt_undersize	(Optional) Undersize
mgmt_outdisc	(Optional) Out discard
mgmt_single_col	(Optional) Single collision
mgmt_multi_col	(Optional) Multiple collision
mgmt_late_col	(Optional) Late collision
mgmt_excess_col	(Optional) Excess collision
mgmt_carri_sen	(Optional) Carrier sense
mgmt_runts	(Optional) Runts
mgmt_giants	(Optional) Giants
mgmt_sqetest_err	(Optional) SQETest error
mgmt_deferred_tx	(Optional) Deferred tx
mgmt_inmactx_err	(Optional) In MAC tx
mgmt_inmacrx_err	(Optional) In MAC rx
mgmt_symbol_err	(Optional) Symbol error
loop_in_pkts	(Optional) Input packets
loop_in_bytes	(Optional) Input bytes
loop_in_mcast	(Optional) Input multicast
loop_in_compressed	(Optional) Input compressed
loop_in_errors	(Optional) Input errors
loop_in_frame	(Optional) Input frame errors
loop_in_overrun	(Optional) Input overrun
loop_in_fifo	(Optional) Input fifo
loop_out_pkts	(Optional) Output packets
loop_out_bytes	(Optional) Output bytes
loop_out_underruns	(Optional) Output underruns
loop_out_errors	(Optional) Output errors
loop_out_collisions	(Optional) Output collisions
loop_out_fifo	(Optional) Output fifo
loop_out_carriers	(Optional) Output carrier errors
eth_load_interval1_rx	(Optional) interval 1 timer value in sec
eth_inrate1_bits	(Optional) interval 1 input rate bits/sec
eth_inrate1_pkts	(Optional) interval 1 input rate pkts/sec
eth_load_interval1_tx	(Optional) interval 1 timer value in sec
eth_outrate1_bits	(Optional) interval 1 output rate bits/sec
eth_outrate1_pkts	(Optional) interval 1 output rate pkts/sec
eth_inrate1_summary_bits	(Optional) interval 1 input rate bit summary
eth_inrate1_summary_pkts	(Optional) interval 1 input rate pkt summary
eth_outrate1_summary_bits	(Optional) interval 1 output rate bit summary
eth_outrate1_summary_pkts	(Optional) interval 1 output rate pkt summary
eth_load_interval2_rx	(Optional) interval 2 timer value in sec
eth_inrate2_bits	(Optional) interval 2 input rate bits/sec
eth_inrate2_pkts	(Optional) interval 2 input rate pkts/sec
eth_load_interval2_tx	(Optional) interval 2 timer value in sec
eth_outrate2_bits	(Optional) interval 2 output rate bits/sec
eth_outrate2_pkts	(Optional) interval 2 output rate pkts/sec
eth_inrate2_summary_bits	(Optional) interval 2 input rate bit summary
eth_inrate2_summary_pkts	(Optional) interval 2 input rate pkt summary
eth_outrate2_summary_bits	(Optional) interval 2 output rate bit summary
eth_outrate2_summary_pkts	(Optional) interval 2 output rate pkt summary
eth_load_interval3_rx	(Optional) interval 3 timer value in sec
eth_inrate3_bits	(Optional) interval 3 input rate bits/sec
eth_inrate3_pkts	(Optional) interval 3 input rate pkts/sec
eth_load_interval3_tx	(Optional) interval 3 timer value in sec
eth_outrate3_bits	(Optional) interval 3 output rate bits/sec
eth_outrate3_pkts	(Optional) interval 3 output rate pkts/sec
eth_inrate3_summary_bits	(Optional) interval 3 input rate bit summary
eth_inrate3_summary_pkts	(Optional) interval 3 input rate pkt summary
eth_outrate3_summary_bits	(Optional) interval 3 output rate bit summary
eth_outrate3_summary_pkts	(Optional) interval 3 output rate pkt summary
eth_inpkts	(Optional) Packets input
eth_inucast	(Optional) Unicasts
eth_inmcast	(Optional) Multicasts
eth_inbcast	(Optional) Broadcasts
eth_ingiants	(Optional) giants
eth_inbytes	(Optional) Bytes input
eth_storm_supp	(Optional) storm suppression
eth_inb64	(Optional) input pkts between 0 and 64 bytes
eth_inb65_127	(Optional) input pkts between 65 and 127 bytes
eth_inb128_255	(Optional) input pkts between 128 and 255 bytes
eth_inb256_511	(Optional) input pkts between 256 and 511 bytes
eth_inb512_1023	(Optional) input pkts between 512 and 1023 bytes
eth_inb1024_1518	(Optional) input pkts between 1024 and 1518 bytes
eth_inb1519_1548	(Optional) input pkts between 1519 and 1548 bytes
eth_intrunk	(Optional) input trunk pkts
eth_outpkts	(Optional) packets output
eth_outucast	(Optional) Unicasts
eth_outmcast	(Optional) Multicasts
eth_outbcast	(Optional) Broadcasts
eth_outgiants	(Optional) giants
eth_outbytes	(Optional) bytes output
eth_outb64	(Optional) output pkts between 0 and 64 bytes
eth_outb65_127	(Optional) output pkts between 65 and 127 bytes
eth_outb128_255	(Optional) output pkts between 128 and 255 bytes
eth_outb256_511	(Optional) output pkts between 256 and 511 bytes
eth_outb512_1023	(Optional) output pkts between 512 and 1023 bytes
eth_outb1024_1518	(Optional) output pkts between 1024 and 1518 bytes
eth_outb1519_1548	(Optional) output pkts between 1519 and 1548 bytes
eth_outtrunk	(Optional) output trunk pkts
eth_nobuf	(Optional) No buffer received
eth_runts	(Optional) runts
eth_crc	(Optional) CRC
eth_ecc	(Optional) ECC
eth_overrun	(Optional) overrun
eth_underrun	(Optional) underruns
eth_ignored	(Optional) ignored
eth_bad_eth	(Optional) bad ether type drop
eth_bad_proto	(Optional) bad protocol drops
eth_in_ifdown_drops	(Optional) Input if-down drops
eth_coll	(Optional) collisions
eth_latecoll	(Optional) late collision
eth_lostcarrier	(Optional) lost carrier
eth_nocarrier	(Optional) no carrier
eth_babbles	(Optional) babbles
eth_watchdog	(Optional) watchdog
eth_dribble	(Optional) input packets with dribble condition
eth_inerr	(Optional) input errors
eth_outerr	(Optional) output errors
eth_deferred	(Optional) deferred
eth_jabbers	(Optional) jabbers
eth_shortframe	(Optional) short frames
eth_single_coll	(Optional) single collisions
eth_multi_coll	(Optional) multi collisions
eth_excess_coll	(Optional) excessive collisions
eth_indiscard	(Optional) discards
eth_bad_encap	(Optional) bad encapsulation
eth_outcrc	(Optional) Output CRC
eth_symbol	(Optional) symbol errors
eth_out_drops	(Optional) output drops
eth_bpdu_outlost	(Optional) BPDU output lost
eth_cos0_outlost	(Optional) output pkts
eth_cos1_outlost	(Optional) output pkts
eth_cos2_outlost	(Optional) output pkts
eth_cos3_outlost	(Optional) output pkts
eth_cos4_outlost	(Optional) output pkts
eth_cos5_outlost	(Optional) output pkts
eth_cos6_outlost	(Optional) output pkts
eth_cos7_outlost	(Optional) output pkts
eth_inpause	(Optional) pause input
eth_outpause	(Optional) PAUSE output
eth_resets	(Optional) interface resets
eth_sqetest	(Optional) SQE test
eth_l2_ucastpkts	(Optional) L2 switched ucast pkts
eth_l2_ucastbytes	(Optional) L2 switched ucast bytes
eth_l2_mcastpkts	(Optional) L2 switched mcast pkts
eth_l2_mcastbytes	(Optional) L2 switched mcast bytes
eth_l2_bcastpkts	(Optional) L2 switched bcast pkts
eth_l2_bcastbytes	(Optional) L2 switched bcast bytes
eth_l3in_ucastpkts	(Optional) L3 in switched ucast pkts
eth_l3in_ucastbytes	(Optional) L3 in switched ucast bytes
eth_l3in_mcastpkts	(Optional) L3 in switched mcast pkts
eth_l3in_mcastbytes	(Optional) L3 in switched mcast bytes
eth_l3in_bcastpkts	(Optional) L3 in switched bcast pkts
eth_l3in_bcastbytes	(Optional) L3 in switched bcast bytes
eth_l3out_ucastpkts	(Optional) L3 out switched ucast pkts
eth_l3out_ucastbytes	(Optional) L3 out switched ucast bytes
eth_l3out_mcastpkts	(Optional) L3 out switched mcast pkts
eth_l3out_mcastbytes	(Optional) L3 out switched mcast bytes
eth_l3out_bcastpkts	(Optional) L3 out switched bcast pkts
eth_l3out_bcastbytes	(Optional) L3 out switched bcast bytes
eth_l3in_routed_pkts	(Optional) L3 in routed pkts
eth_l3in_routed_bytes	(Optional) L3 in routed bytes
eth_l3out_routed_pkts	(Optional) L3 out routed pkts
eth_l3out_routed_bytes	(Optional) L3 out routed bytes
eth_l3avg1_inbytes	(Optional) Load interval 1 L3 average in switched bytes
eth_l3avg1_inpkts	(Optional) Load interval 1 L3 average in switched pkts
eth_l3avg1_outbytes	(Optional) Load interval 1 L3 average out switched bytes
eth_l3avg1_outpkts	(Optional) Load interval 1 L3 average out switched pkts
eth_ipmcast	(Optional) IP multicast
eth_inhw_switched	(Optional) Input H/W Switched
eth_insw_switched	(Optional) Input S/W Switched
eth_throtles	(Optional) throttles
eth_frame	(Optional) frame
eth_outhw_switched	(Optional) Out H/W Switched
eth_outsw_switched	(Optional) Out S/W Switched
eth_buffail	(Optional) output buffer failures
eth_bufswapped	(Optional) output buffers swapped out
eth_arpdrops	(Optional) arp drops
eth_out_ifdown_drops	(Optional) Output if-down drops
eth_fcoe_in_pkts	(Optional) fcoe in pkts
eth_fcoe_in_octets	(Optional) fcoe in octets
eth_fcoe_out_pkts	(Optional) fcoe out pkts
eth_fcoe_out_octets	(Optional) fcoe out octets
eth_nfcoe_in_pkts	(Optional) nfcoe in pkts
eth_nfcoe_in_octets	(Optional) nfcoe in octets
eth_nfcoe_out_pkts	(Optional) nfcoe out pkts
eth_nfcoe_out_octets	(Optional) nfcoe out octets
svi_time_last_cleared	(Optional) Time last cleared
svi_tx_load	(Optional) Tx Load
svi_rx_load	(Optional) Rx Load
svi_reliability	(Optional) Reliability

Command Mode

/exec

show interface counters detailed

show interface <ifloop_ctr_dtl> counters detailed [ __readonly__ TABLE_interface <interface> [ <loop_in_pkts> ] [ <loop_in_bytes> ] [ <loop_in_mcast> ] [ <loop_in_compressed> ] [ <loop_in_errors> ] [ <loop_in_frame> ] [ <loop_in_overrun> ] [ <loop_in_fifo> ] [ <loop_out_pkts> ] [ <loop_out_bytes> ] [ <loop_out_underruns> ] [ <loop_out_errors> ] [ <loop_out_collisions> ] [ <loop_out_fifo> ] [ <loop_out_carriers> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifloop_ctr_dtl	Enter interface type and number in module/slot format
counters	Show interface counters
detailed	Show only non-zero counters
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
loop_in_pkts	(Optional) Input packets
loop_in_bytes	(Optional) Input bytes
loop_in_mcast	(Optional) Input multicast
loop_in_compressed	(Optional) Input compressed
loop_in_errors	(Optional) Input errors
loop_in_frame	(Optional) Input frame errors
loop_in_overrun	(Optional) Input overrun
loop_in_fifo	(Optional) Input fifo
loop_out_pkts	(Optional) Output packets
loop_out_bytes	(Optional) Output bytes
loop_out_underruns	(Optional) Output underruns
loop_out_errors	(Optional) Output errors
loop_out_collisions	(Optional) Output collisions
loop_out_fifo	(Optional) Output fifo
loop_out_carriers	(Optional) Output carrier errors

Command Mode

/exec

show interface counters detailed

show interface <ifeth_ctr_dtl> counters detailed [ snmp ] [ __readonly__ TABLE_interface <interface> [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_inrate1_summary_bits> ] [ <eth_inrate1_summary_pkts> ] [ <eth_outrate1_summary_bits> ] [ <eth_outrate1_summary_pkts> ] [ <eth_load_interval2_rx> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_load_interval2_tx> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_inrate2_summary_bits> ] [ <eth_inrate2_summary_pkts> ] [ <eth_outrate2_summary_bits> ] [ <eth_outrate2_summary_pkts> ] [ <eth_load_interval3_rx> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_load_interval3_tx> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_inrate3_summary_bits> ] [ <eth_inrate3_summary_pkts> ] [ <eth_outrate3_summary_bits> ] [ <eth_outrate3_summary_pkts> ] [ <eth_inpkts> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_ingiants> ] [ <eth_inbytes> ] [ <eth_storm_supp> ] [ <eth_inb64> ] [ <eth_inb65_127> ] [ <eth_inb128_255> ] [ <eth_inb256_511> ] [ <eth_inb512_1023> ] [ <eth_inb1024_1518> ] [ <eth_inb1519_1548> ] [ <eth_intrunk> ] [ <eth_outpkts> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_outgiants> ] [ <eth_outbytes> ] [ <eth_outb64> ] [ <eth_outb65_127> ] [ <eth_outb128_255> ] [ <eth_outb256_511> ] [ <eth_outb512_1023> ] [ <eth_outb1024_1518> ] [ <eth_outb1519_1548> ] [ <eth_outtrunk> ] [ <eth_nobuf> ] [ <eth_runts> ] [ <eth_crc> ] [ <eth_ecc> ] [ <eth_overrun> ] [ <eth_underrun> ] [ <eth_ignored> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_in_ifdown_drops> ] [ <eth_coll> ] [ <eth_latecoll> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_babbles> ] [ <eth_watchdog> ] [ <eth_dribble> ] [ <eth_inerr> ] [ <eth_outerr> ] [ <eth_deferred> ] [ <eth_jabbers> ] [ <eth_shortframe> ] [ <eth_single_coll> ] [ <eth_multi_coll> ] [ <eth_excess_coll> ] [ <eth_indiscard> ] [ <eth_bad_encap> ] [ <eth_outcrc> ] [ <eth_symbol> ] [ <eth_out_drops> ] [ <eth_bpdu_outlost> ] [ <eth_cos0_outlost> ] [ <eth_cos1_outlost> ] [ <eth_cos2_outlost> ] [ <eth_cos3_outlost> ] [ <eth_cos4_outlost> ] [ <eth_cos5_outlost> ] [ <eth_cos6_outlost> ] [ <eth_cos7_outlost> ] [ <eth_inpause> ] [ <eth_outpause> ] [ <eth_resets> ] [ <eth_sqetest> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_ipmcast> ] [ <eth_inhw_switched> ] [ <eth_insw_switched> ] [ <eth_throtles> ] [ <eth_frame> ] [ <eth_outhw_switched> ] [ <eth_outsw_switched> ] [ <eth_buffail> ] [ <eth_bufswapped> ] [ <eth_arpdrops> ] [ <eth_out_ifdown_drops> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifeth_ctr_dtl	Enter interface type and number in module/slot format
counters	Show interface counters
detailed	Show only non-zero counters
snmp	(Optional) Show SNMP MIB values
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
eth_load_interval1_rx	(Optional) interval 1 timer value in sec
eth_inrate1_bits	(Optional) interval 1 input rate bits/sec
eth_inrate1_pkts	(Optional) interval 1 input rate pkts/sec
eth_load_interval1_tx	(Optional) interval 1 timer value in sec
eth_outrate1_bits	(Optional) interval 1 output rate bits/sec
eth_outrate1_pkts	(Optional) interval 1 output rate pkts/sec
eth_inrate1_summary_bits	(Optional) interval 1 input rate bit summary
eth_inrate1_summary_pkts	(Optional) interval 1 input rate pkt summary
eth_outrate1_summary_bits	(Optional) interval 1 output rate bit summary
eth_outrate1_summary_pkts	(Optional) interval 1 output rate pkt summary
eth_load_interval2_rx	(Optional) interval 2 timer value in sec
eth_inrate2_bits	(Optional) interval 2 input rate bits/sec
eth_inrate2_pkts	(Optional) interval 2 input rate pkts/sec
eth_load_interval2_tx	(Optional) interval 2 timer value in sec
eth_outrate2_bits	(Optional) interval 2 output rate bits/sec
eth_outrate2_pkts	(Optional) interval 2 output rate pkts/sec
eth_inrate2_summary_bits	(Optional) interval 2 input rate bit summary
eth_inrate2_summary_pkts	(Optional) interval 2 input rate pkt summary
eth_outrate2_summary_bits	(Optional) interval 2 output rate bit summary
eth_outrate2_summary_pkts	(Optional) interval 2 output rate pkt summary
eth_load_interval3_rx	(Optional) interval 3 timer value in sec
eth_inrate3_bits	(Optional) interval 3 input rate bits/sec
eth_inrate3_pkts	(Optional) interval 3 input rate pkts/sec
eth_load_interval3_tx	(Optional) interval 3 timer value in sec
eth_outrate3_bits	(Optional) interval 3 output rate bits/sec
eth_outrate3_pkts	(Optional) interval 3 output rate pkts/sec
eth_inrate3_summary_bits	(Optional) interval 3 input rate bit summary
eth_inrate3_summary_pkts	(Optional) interval 3 input rate pkt summary
eth_outrate3_summary_bits	(Optional) interval 3 output rate bit summary
eth_outrate3_summary_pkts	(Optional) interval 3 output rate pkt summary
eth_inpkts	(Optional) Packets input
eth_inucast	(Optional) Unicasts
eth_inmcast	(Optional) Multicasts
eth_inbcast	(Optional) Broadcasts
eth_ingiants	(Optional) giants
eth_inbytes	(Optional) Bytes input
eth_storm_supp	(Optional) storm suppression
eth_inb64	(Optional) input pkts between 0 and 64 bytes
eth_inb65_127	(Optional) input pkts between 65 and 127 bytes
eth_inb128_255	(Optional) input pkts between 128 and 255 bytes
eth_inb256_511	(Optional) input pkts between 256 and 511 bytes
eth_inb512_1023	(Optional) input pkts between 512 and 1023 bytes
eth_inb1024_1518	(Optional) input pkts between 1024 and 1518 bytes
eth_inb1519_1548	(Optional) input pkts between 1519 and 1548 bytes
eth_intrunk	(Optional) input trunk pkts
eth_outpkts	(Optional) packets output
eth_outucast	(Optional) Unicasts
eth_outmcast	(Optional) Multicasts
eth_outbcast	(Optional) Broadcasts
eth_outgiants	(Optional) giants
eth_outbytes	(Optional) bytes output
eth_outb64	(Optional) output pkts between 0 and 64 bytes
eth_outb65_127	(Optional) output pkts between 65 and 127 bytes
eth_outb128_255	(Optional) output pkts between 128 and 255 bytes
eth_outb256_511	(Optional) output pkts between 256 and 511 bytes
eth_outb512_1023	(Optional) output pkts between 512 and 1023 bytes
eth_outb1024_1518	(Optional) output pkts between 1024 and 1518 bytes
eth_outb1519_1548	(Optional) output pkts between 1519 and 1548 bytes
eth_outtrunk	(Optional) output trunk pkts
eth_nobuf	(Optional) No buffer received
eth_runts	(Optional) runts
eth_crc	(Optional) CRC
eth_ecc	(Optional) ECC
eth_overrun	(Optional) overrun
eth_underrun	(Optional) underruns
eth_ignored	(Optional) ignored
eth_bad_eth	(Optional) bad ether type drop
eth_bad_proto	(Optional) bad protocol drops
eth_in_ifdown_drops	(Optional) Input if-down drops
eth_coll	(Optional) collisions
eth_latecoll	(Optional) late collision
eth_lostcarrier	(Optional) lost carrier
eth_nocarrier	(Optional) no carrier
eth_babbles	(Optional) babbles
eth_watchdog	(Optional) watchdog
eth_dribble	(Optional) input packets with dribble condition
eth_inerr	(Optional) input errors
eth_outerr	(Optional) output errors
eth_deferred	(Optional) deferred
eth_jabbers	(Optional) jabbers
eth_shortframe	(Optional) short frames
eth_single_coll	(Optional) single collisions
eth_multi_coll	(Optional) multi collisions
eth_excess_coll	(Optional) excessive collisions
eth_indiscard	(Optional) discards
eth_bad_encap	(Optional) bad encapsulation
eth_outcrc	(Optional) Output CRC
eth_symbol	(Optional) symbol errors
eth_out_drops	(Optional) output drops
eth_bpdu_outlost	(Optional) BPDU output lost
eth_cos0_outlost	(Optional) output pkts
eth_cos1_outlost	(Optional) output pkts
eth_cos2_outlost	(Optional) output pkts
eth_cos3_outlost	(Optional) output pkts
eth_cos4_outlost	(Optional) output pkts
eth_cos5_outlost	(Optional) output pkts
eth_cos6_outlost	(Optional) output pkts
eth_cos7_outlost	(Optional) output pkts
eth_inpause	(Optional) pause input
eth_outpause	(Optional) PAUSE output
eth_resets	(Optional) interface resets
eth_sqetest	(Optional) SQE test
eth_l2_ucastpkts	(Optional) L2 switched ucast pkts
eth_l2_ucastbytes	(Optional) L2 switched ucast bytes
eth_l2_mcastpkts	(Optional) L2 switched mcast pkts
eth_l2_mcastbytes	(Optional) L2 switched mcast bytes
eth_l2_bcastpkts	(Optional) L2 switched bcast pkts
eth_l2_bcastbytes	(Optional) L2 switched bcast bytes
eth_l3in_ucastpkts	(Optional) L3 in switched ucast pkts
eth_l3in_ucastbytes	(Optional) L3 in switched ucast bytes
eth_l3in_mcastpkts	(Optional) L3 in switched mcast pkts
eth_l3in_mcastbytes	(Optional) L3 in switched mcast bytes
eth_l3in_bcastpkts	(Optional) L3 in switched bcast pkts
eth_l3in_bcastbytes	(Optional) L3 in switched bcast bytes
eth_l3out_ucastpkts	(Optional) L3 out switched ucast pkts
eth_l3out_ucastbytes	(Optional) L3 out switched ucast bytes
eth_l3out_mcastpkts	(Optional) L3 out switched mcast pkts
eth_l3out_mcastbytes	(Optional) L3 out switched mcast bytes
eth_l3out_bcastpkts	(Optional) L3 out switched bcast pkts
eth_l3out_bcastbytes	(Optional) L3 out switched bcast bytes
eth_l3in_routed_pkts	(Optional) L3 in routed pkts
eth_l3in_routed_bytes	(Optional) L3 in routed bytes
eth_l3out_routed_pkts	(Optional) L3 out routed pkts
eth_l3out_routed_bytes	(Optional) L3 out routed bytes
eth_l3avg1_inbytes	(Optional) Load interval 1 L3 average in switched bytes
eth_l3avg1_inpkts	(Optional) Load interval 1 L3 average in switched pkts
eth_l3avg1_outbytes	(Optional) Load interval 1 L3 average out switched bytes
eth_l3avg1_outpkts	(Optional) Load interval 1 L3 average out switched pkts
eth_ipmcast	(Optional) IP multicast
eth_inhw_switched	(Optional) Input H/W Switched
eth_insw_switched	(Optional) Input S/W Switched
eth_throtles	(Optional) throttles
eth_frame	(Optional) frame
eth_outhw_switched	(Optional) Out H/W Switched
eth_outsw_switched	(Optional) Out S/W Switched
eth_buffail	(Optional) output buffer failures
eth_bufswapped	(Optional) output buffers swapped out
eth_arpdrops	(Optional) arp drops
eth_out_ifdown_drops	(Optional) Output if-down drops

Command Mode

/exec

show interface counters detailed all

show interface <ifid_ctr_dtl_all> counters detailed all [ snmp ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid_ctr_dtl_all	Enter interface type and number in module/slot format
counters	Show interface counters
detailed	Show only non-zero counters
all	Show every interface counter
snmp	(Optional) Show SNMP MIB values

Command Mode

/exec

show interface counters detailed all

show interface <ifmgmt_ctr_dtl_all> counters detailed all [ __readonly__ TABLE_interface <interface> [ <vdc_lvl_in_pkts> ] [ <vdc_lvl_in_bytes> ] [ <vdc_lvl_in_ucast> ] [ <vdc_lvl_in_mcast> ] [ <vdc_lvl_in_bcast> ] [ <vdc_lvl_in_bps> ] [ <vdc_lvl_in_pps> ] [ <vdc_lvl_in_avg_pkts> ] [ <vdc_lvl_in_avg_bytes> ] [ <vdc_lvl_out_pkts> ] [ <vdc_lvl_out_bytes> ] [ <vdc_lvl_out_ucast> ] [ <vdc_lvl_out_mcast> ] [ <vdc_lvl_out_bcast> ] [ <vdc_lvl_out_bps> ] [ <vdc_lvl_out_pps> ] [ <vdc_lvl_out_avg_pkts> ] [ <vdc_lvl_out_avg_bytes> ] [ <mgmt_in_pkts> ] [ <mgmt_in_bytes> ] [ <mgmt_in_mcast> ] [ <mgmt_out_pkts> ] [ <mgmt_out_bytes> ] [ <mgmt_in_errors> ] [ <mgmt_out_errors> ] [ <mgmt_in_fifo> ] [ <mgmt_out_fifo> ] [ <mgmt_in_compressed> ] [ <mgmt_in_frame> ] [ <mgmt_in_overrun> ] [ <mgmt_out_underruns> ] [ <mgmt_out_collisions> ] [ <mgmt_out_carrier> ] [ <mgmt_align_err> ] [ <mgmt_fcs_err> ] [ <mgmt_xmit_err> ] [ <mgmt_rcv_err> ] [ <mgmt_undersize> ] [ <mgmt_outdisc> ] [ <mgmt_single_col> ] [ <mgmt_multi_col> ] [ <mgmt_late_col> ] [ <mgmt_excess_col> ] [ <mgmt_carri_sen> ] [ <mgmt_runts> ] [ <mgmt_giants> ] [ <mgmt_sqetest_err> ] [ <mgmt_deferred_tx> ] [ <mgmt_inmactx_err> ] [ <mgmt_inmacrx_err> ] [ <mgmt_symbol_err> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifmgmt_ctr_dtl_all	Enter interface type and number in module/slot format
counters	Show interface counters
detailed	Show only non-zero counters
all	Show every interface counter
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
vdc_lvl_in_pkts	(Optional) VDC level input packets
vdc_lvl_in_bytes	(Optional) VDC level input bytes
vdc_lvl_in_ucast	(Optional) VDC level input unicast packets
vdc_lvl_in_mcast	(Optional) VDC level input multicast packets
vdc_lvl_in_bcast	(Optional) VDC level input broadcast packets
vdc_lvl_in_bps	(Optional) VDC level input bytes per second
vdc_lvl_in_pps	(Optional) VDC level input packets per second
vdc_lvl_in_avg_pkts	(Optional) VDC level average input packets
vdc_lvl_in_avg_bytes	(Optional) VDC level average input bytes
vdc_lvl_out_pkts	(Optional) VDC level output packets
vdc_lvl_out_bytes	(Optional) VDC level output bytes
vdc_lvl_out_ucast	(Optional) VDC level output unicast packets
vdc_lvl_out_mcast	(Optional) VDC level output multicast packets
vdc_lvl_out_bcast	(Optional) VDC level output broadcast packets
vdc_lvl_out_bps	(Optional) VDC level output bytes per second
vdc_lvl_out_pps	(Optional) VDC level output packets per second
vdc_lvl_out_avg_pkts	(Optional) VDC level average output packets
vdc_lvl_out_avg_bytes	(Optional) VDC level average output bytes
mgmt_in_pkts	(Optional) Input packets
mgmt_in_bytes	(Optional) Input bytes
mgmt_in_mcast	(Optional) Input multicast frames
mgmt_out_pkts	(Optional) Output packets
mgmt_out_bytes	(Optional) Output bytes
mgmt_in_errors	(Optional) Input errors
mgmt_out_errors	(Optional) Output errors
mgmt_in_fifo	(Optional) Input fifo
mgmt_out_fifo	(Optional) Output fifo
mgmt_in_compressed	(Optional) Input compressed
mgmt_in_frame	(Optional) Input frame errors
mgmt_in_overrun	(Optional) Input overrun
mgmt_out_underruns	(Optional) Output overruns
mgmt_out_collisions	(Optional) Output collisions
mgmt_out_carrier	(Optional) Output carrier errors
mgmt_align_err	(Optional) Align error
mgmt_fcs_err	(Optional) FCS error
mgmt_xmit_err	(Optional) Transmit error
mgmt_rcv_err	(Optional) Receive error
mgmt_undersize	(Optional) Undersize
mgmt_outdisc	(Optional) Out discard
mgmt_single_col	(Optional) Single collision
mgmt_multi_col	(Optional) Multiple collision
mgmt_late_col	(Optional) Late collision
mgmt_excess_col	(Optional) Excess collision
mgmt_carri_sen	(Optional) Carrier sense
mgmt_runts	(Optional) Runts
mgmt_giants	(Optional) Giants
mgmt_sqetest_err	(Optional) SQETest error
mgmt_deferred_tx	(Optional) Deferred tx
mgmt_inmactx_err	(Optional) In MAC tx
mgmt_inmacrx_err	(Optional) In MAC rx
mgmt_symbol_err	(Optional) Symbol error

Command Mode

/exec

show interface counters detailed all

show interface <ifloop_ctr_dtl_all> counters detailed all [ __readonly__ TABLE_interface <interface> [ <rx_total_pkts> ] [ <tx_total_pkts> ] [ <rx_mcast_pkts> ] [ <rx_octets> ] [ <tx_octets> ] [ <loop_in_pkts> ] [ <loop_in_bytes> ] [ <loop_in_mcast> ] [ <loop_in_compressed> ] [ <loop_in_errors> ] [ <loop_in_frame> ] [ <loop_in_overrun> ] [ <loop_in_fifo> ] [ <loop_out_pkts> ] [ <loop_out_bytes> ] [ <loop_out_underruns> ] [ <loop_out_errors> ] [ <loop_out_collisions> ] [ <loop_out_fifo> ] [ <loop_out_carriers> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifloop_ctr_dtl_all	Enter interface type and number in module/slot format
counters	Show interface counters
detailed	Show only non-zero counters
all	Show every interface counter
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
rx_total_pkts	(Optional) total input packets
tx_total_pkts	(Optional) total output packets
rx_mcast_pkts	(Optional) input multicasts
rx_octets	(Optional) input bytes
tx_octets	(Optional) output bytes
loop_in_pkts	(Optional) Input packets
loop_in_bytes	(Optional) Input bytes
loop_in_mcast	(Optional) Input multicast
loop_in_compressed	(Optional) Input compressed
loop_in_errors	(Optional) Input errors
loop_in_frame	(Optional) Input frame errors
loop_in_overrun	(Optional) Input overrun
loop_in_fifo	(Optional) Input fifo
loop_out_pkts	(Optional) Output packets
loop_out_bytes	(Optional) Output bytes
loop_out_underruns	(Optional) Output underruns
loop_out_errors	(Optional) Output errors
loop_out_collisions	(Optional) Output collisions
loop_out_fifo	(Optional) Output fifo
loop_out_carriers	(Optional) Output carrier errors

Command Mode

/exec

show interface counters detailed all

show interface <ifrange> counters detailed all [ snmp ] [ __readonly__ TABLE_interface <interface> [ <svi_routed_pkts_in> ] [ <svi_routed_bytes_in> ] [ <svi_routed_pkts_out> ] [ <svi_routed_bytes_out> ] [ <svi_ucast_pkts_in> ] [ <svi_ucast_bytes_in> ] [ <svi_mcast_pkts_in> ] [ <svi_mcast_bytes_in> ] [ <svi_ucast_pkts_out> ] [ <svi_ucast_bytes_out> ] [ <svi_mcast_pkts_out> ] [ <svi_mcast_bytes_out> ] [ <svi_ipv4_ucast_pkts_in> ] [ <svi_ipv4_ucast_bytes_in> ] [ <svi_ipv4_ucast_pkts_out> ] [ <svi_ipv4_ucast_bytes_out> ] [ <svi_ipv4_mcast_pkts_in> ] [ <svi_ipv4_mcast_bytes_in> ] [ <svi_ipv4_mcast_pkts_out> ] [ <svi_ipv4_mcast_bytes_out> ] [ <svi_ipv6_ucast_pkts_in> ] [ <svi_ipv6_ucast_bytes_in> ] [ <svi_ipv6_ucast_pkts_out> ] [ <svi_ipv6_ucast_bytes_out> ] [ <svi_ipv6_mcast_pkts_in> ] [ <svi_ipv6_mcast_bytes_in> ] [ <svi_ipv6_mcast_pkts_out> ] [ <svi_ipv6_mcast_bytes_out> ] [ <svi_average_input_bits> ] [ <svi_average_input_packets> ] [ <svi_average_output_bits> ] [ <svi_average_output_packets> ] [ <svi_rate_in_mins> ] [ <svi_time_last_cleared> ] [ <svi_tx_load> ] [ <svi_rx_load> ] [ <svi_reliability> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifrange	Enter interface type and number in module/slot format
counters	Show interface counters
detailed	Show only non-zero counters
all	everything
snmp	(Optional) Show SNMP MIB values
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
svi_time_last_cleared	(Optional) Time last cleared
svi_tx_load	(Optional) Tx Load
svi_rx_load	(Optional) Rx Load
svi_reliability	(Optional) Reliability

Command Mode

/exec

show interface counters detailed all

show interface <ifeth_ctr_dtl_all> counters detailed all [ snmp ] [ __readonly__ TABLE_interface <interface> [ <rx_total_pkts> ] [ <tx_total_pkts> ] [ <rx_ucast_pkts> ] [ <rx_mcast_pkts> ] [ <rx_bcast_pkts> ] [ <rx_octets> ] [ <tx_ucast_pkts> ] [ <tx_mcast_pkts> ] [ <tx_bcast_pkts> ] [ <tx_octets> ] [ <rxtx_pkts_64octets> ] [ <rxtx_pkts_65_127octets> ] [ <rxtx_pkts_128_255octets> ] [ <rxtx_pkts_256_511octets> ] [ <rxtx_pkts_512_1023octets> ] [ <rxtx_pkts_1024_1518octets> ] [ <rxtx_pkts_1519_1548octets> ] [ <rx_trunk_frames> ] [ <tx_trunk_frames> ] [ <rx_drop_events> ] [ <rxtx_giants> ] [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_inrate1_summary_bits> ] [ <eth_inrate1_summary_pkts> ] [ <eth_outrate1_summary_bits> ] [ <eth_outrate1_summary_pkts> ] [ <eth_load_interval2_rx> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_load_interval2_tx> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_inrate2_summary_bits> ] [ <eth_inrate2_summary_pkts> ] [ <eth_outrate2_summary_bits> ] [ <eth_outrate2_summary_pkts> ] [ <eth_load_interval3_rx> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_load_interval3_tx> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_inrate3_summary_bits> ] [ <eth_inrate3_summary_pkts> ] [ <eth_outrate3_summary_bits> ] [ <eth_outrate3_summary_pkts> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_l3avg2_inbytes> ] [ <eth_l3avg2_inpkts> ] [ <eth_l3avg2_outbytes> ] [ <eth_l3avg2_outpkts> ] [ <eth_l3avg3_inbytes> ] [ <eth_l3avg3_inpkts> ] [ <eth_l3avg3_outbytes> ] [ <eth_l3avg3_outpkts> ] [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_nobuf> ] [ <eth_inbcast> ] [ <eth_inmcast> ] [ <eth_inucast> ] [ <eth_ingiants> ] [ <eth_ipmcast> ] [ <eth_inhw_switched> ] [ <eth_insw_switched> ] [ <eth_runts> ] [ <eth_storm_supp> ] [ <eth_throtles> ] [ <eth_inerr> ] [ <eth_crc> ] [ <eth_ecc> ] [ <eth_frame> ] [ <eth_overrun> ] [ <eth_ignored> ] [ <eth_watchdog> ] [ <eth_outbcast> ] [ <eth_outmcast> ] [ <eth_outucast> ] [ <eth_outgiants> ] [ <eth_inpause> ] [ <eth_dribble> ] [ <eth_in_ifdown_drops> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_underrun> ] [ <eth_outhw_switched> ] [ <eth_outsw_switched> ] [ <eth_outerr> ] [ <eth_coll> ] [ <eth_resets> ] [ <eth_babbles> ] [ <eth_latecoll> ] [ <eth_deferred> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_outpause> ] [ <eth_buffail> ] [ <eth_bufswapped> ] [ <eth_arpdrops> ] [ <eth_out_ifdown_drops> ] [ <eth_single_coll> ] [ <eth_multi_coll> ] [ <eth_excess_coll> ] [ <eth_jabbers> ] [ <eth_shortframe> ] [ <eth_indiscard> ] [ <eth_bad_encap> ] [ <eth_outcrc> ] [ <eth_symbol> ] [ <eth_out_drops> ] [ <eth_sqetest> ] [ <eth_inb64> ] [ <eth_inb65_127> ] [ <eth_inb128_255> ] [ <eth_inb256_511> ] [ <eth_inb512_1023> ] [ <eth_inb1024_1518> ] [ <eth_inb1519_1548> ] [ <eth_intrunk> ] [ <eth_outb64> ] [ <eth_outb65_127> ] [ <eth_outb128_255> ] [ <eth_outb256_511> ] [ <eth_outb512_1023> ] [ <eth_outb1024_1518> ] [ <eth_outb1519_1548> ] [ <eth_outtrunk> ] [ <eth_bpdu_outlost> ] [ <eth_cos0_outlost> ] [ <eth_cos1_outlost> ] [ <eth_cos2_outlost> ] [ <eth_cos3_outlost> ] [ <eth_cos4_outlost> ] [ <eth_cos5_outlost> ] [ <eth_cos6_outlost> ] [ <eth_cos7_outlost> ] [ <eth_fcoe_in_pkts> ] [ <eth_fcoe_in_octets> ] [ <eth_fcoe_out_pkts> ] [ <eth_fcoe_out_octets> ] [ <eth_nfcoe_in_pkts> ] [ <eth_nfcoe_in_octets> ] [ <eth_nfcoe_out_pkts> ] [ <eth_nfcoe_out_octets> ] [ <eth_eee_atx_lpi_msec> ] [ <eth_eee_arcv_lpi_msec> ] [ <eth_eee_atx_lpi_transitions> ] [ <eth_eee_arcv_lpi_transitions> ] [ <eth_phy_ber_count> ] [ <eth_phy_errblks_count> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifeth_ctr_dtl_all	Enter interface type and number in module/slot format
counters	Show interface counters
detailed	Show only non-zero counters
all	everything
snmp	(Optional) Show SNMP MIB values
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
rx_total_pkts	(Optional) total input packets
tx_total_pkts	(Optional) total output packets
rx_ucast_pkts	(Optional) input unicasts
rx_mcast_pkts	(Optional) input multicasts
rx_bcast_pkts	(Optional) input broadcasts
rx_octets	(Optional) input bytes
tx_ucast_pkts	(Optional) output unicasts
tx_mcast_pkts	(Optional) output multicasts
tx_bcast_pkts	(Optional) output broadcasts
tx_octets	(Optional) output bytes
rxtx_pkts_64octets	(Optional) all pkts between 0 and 64 bytes
rxtx_pkts_65_127octets	(Optional) all pkts between 65 and 127 bytes
rxtx_pkts_128_255octets	(Optional) all pkts between 128 and 255 bytes
rxtx_pkts_256_511octets	(Optional) all pkts between 256 and 511 bytes
rxtx_pkts_512_1023octets	(Optional) all pkts between 512 and 1023 bytes
rxtx_pkts_1024_1518octets	(Optional) all pkts between 1024 and 1518 bytes
rxtx_pkts_1519_1548octets	(Optional) all pkts between 1519 and 1548 bytes
rx_trunk_frames	(Optional) input trunk pkts
tx_trunk_frames	(Optional) output trunk pkts
rx_drop_events	(Optional) dropped pkts
rxtx_giants	(Optional) giants
eth_load_interval1_rx	(Optional) interval 1 timer value in sec
eth_inrate1_bits	(Optional) interval 1 input rate bits/sec
eth_inrate1_pkts	(Optional) interval 1 input rate pkts/sec
eth_load_interval1_tx	(Optional) interval 1 timer value in sec
eth_outrate1_bits	(Optional) interval 1 output rate bits/sec
eth_outrate1_pkts	(Optional) interval 1 output rate pkts/sec
eth_inrate1_summary_bits	(Optional) interval 1 input rate bit summary
eth_inrate1_summary_pkts	(Optional) interval 1 input rate pkt summary
eth_outrate1_summary_bits	(Optional) interval 1 output rate bit summary
eth_outrate1_summary_pkts	(Optional) interval 1 output rate pkt summary
eth_load_interval2_rx	(Optional) interval 2 timer value in sec
eth_inrate2_bits	(Optional) interval 2 input rate bits/sec
eth_inrate2_pkts	(Optional) interval 2 input rate pkts/sec
eth_load_interval2_tx	(Optional) interval 2 timer value in sec
eth_outrate2_bits	(Optional) interval 2 output rate bits/sec
eth_outrate2_pkts	(Optional) interval 2 output rate pkts/sec
eth_inrate2_summary_bits	(Optional) interval 2 input rate bit summary
eth_inrate2_summary_pkts	(Optional) interval 2 input rate pkt summary
eth_outrate2_summary_bits	(Optional) interval 2 output rate bit summary
eth_outrate2_summary_pkts	(Optional) interval 2 output rate pkt summary
eth_load_interval3_rx	(Optional) interval 3 timer value in sec
eth_inrate3_bits	(Optional) interval 3 input rate bits/sec
eth_inrate3_pkts	(Optional) interval 3 input rate pkts/sec
eth_load_interval3_tx	(Optional) interval 3 timer value in sec
eth_outrate3_bits	(Optional) interval 3 output rate bits/sec
eth_outrate3_pkts	(Optional) interval 3 output rate pkts/sec
eth_inrate3_summary_bits	(Optional) interval 3 input rate bit summary
eth_inrate3_summary_pkts	(Optional) interval 3 input rate pkt summary
eth_outrate3_summary_bits	(Optional) interval 3 output rate bit summary
eth_outrate3_summary_pkts	(Optional) interval 3 output rate pkt summary
eth_l2_ucastpkts	(Optional) L2 switched ucast pkts
eth_l2_ucastbytes	(Optional) L2 switched ucast bytes
eth_l2_mcastpkts	(Optional) L2 switched mcast pkts
eth_l2_mcastbytes	(Optional) L2 switched mcast bytes
eth_l2_bcastpkts	(Optional) L2 switched bcast pkts
eth_l2_bcastbytes	(Optional) L2 switched bcast bytes
eth_l3in_ucastpkts	(Optional) IPv4 L3 in switched ucast pkts
eth_l3in_ucastbytes	(Optional) IPv4 L3 in switched ucast bytes
eth_l3in_mcastpkts	(Optional) IPv4 L3 in switched mcast pkts
eth_l3in_mcastbytes	(Optional) IPv4 L3 in switched mcast bytes
eth_l3in_bcastpkts	(Optional) L3 in switched bcast pkts
eth_l3in_bcastbytes	(Optional) L3 in switched bcast bytes
eth_l3out_ucastpkts	(Optional) IPv4 L3 out switched ucast pkts
eth_l3out_ucastbytes	(Optional) IPv4 L3 out switched ucast bytes
eth_l3out_mcastpkts	(Optional) IPv4 L3 out switched mcast pkts
eth_l3out_mcastbytes	(Optional) IPv4 L3 out switched mcast bytes
eth_l3out_bcastpkts	(Optional) L3 out switched bcast pkts
eth_l3out_bcastbytes	(Optional) L3 out switched bcast bytes
eth_l3in_routed_pkts	(Optional) L3 in routed pkts
eth_l3in_routed_bytes	(Optional) L3 in routed bytes
eth_l3out_routed_pkts	(Optional) L3 out routed pkts
eth_l3out_routed_bytes	(Optional) L3 out routed bytes
eth_l3avg1_inbytes	(Optional) Load interval 1 L3 average in switched bytes
eth_l3avg1_inpkts	(Optional) Load interval 1 L3 average in switched pkts
eth_l3avg1_outbytes	(Optional) Load interval 1 L3 average out switched bytes
eth_l3avg1_outpkts	(Optional) Load interval 1 L3 average out switched pkts
eth_l3avg2_inbytes	(Optional) Load interval 2 L3 average in switched bytes
eth_l3avg2_inpkts	(Optional) Load interval 2 L3 average in switched pkts
eth_l3avg2_outbytes	(Optional) Load interval 2 L3 average out switched bytes
eth_l3avg2_outpkts	(Optional) Load interval 2 L3 average out switched pkts
eth_l3avg3_inbytes	(Optional) Load interval 3 L3 average in switched bytes
eth_l3avg3_inpkts	(Optional) Load interval 3 L3 average in switched pkts
eth_l3avg3_outbytes	(Optional) Load interval 3 L3 average out switched bytes
eth_l3avg3_outpkts	(Optional) Load interval 3 L3 average out switched pkts
eth_inpkts	(Optional) Packets input
eth_inbytes	(Optional) Bytes input
eth_nobuf	(Optional) No buffer received
eth_inbcast	(Optional) Broadcasts
eth_inmcast	(Optional) Multicasts
eth_inucast	(Optional) Unicasts
eth_ingiants	(Optional) giants
eth_ipmcast	(Optional) IP multicast
eth_inhw_switched	(Optional) Input H/W Switched
eth_insw_switched	(Optional) Input S/W Switched
eth_runts	(Optional) runts
eth_storm_supp	(Optional) storm suppression
eth_throtles	(Optional) throttles
eth_inerr	(Optional) input errors
eth_crc	(Optional) CRC
eth_ecc	(Optional) ECC
eth_frame	(Optional) frame
eth_overrun	(Optional) overrun
eth_ignored	(Optional) ignored
eth_watchdog	(Optional) watchdog
eth_outbcast	(Optional) Broadcasts
eth_outmcast	(Optional) Multicasts
eth_outucast	(Optional) Unicasts
eth_outgiants	(Optional) giants
eth_inpause	(Optional) pause input
eth_dribble	(Optional) input packets with dribble condition
eth_in_ifdown_drops	(Optional) Input if-down drops
eth_bad_eth	(Optional) bad ether type drop
eth_bad_proto	(Optional) bad protocol drops
eth_outpkts	(Optional) packets output
eth_outbytes	(Optional) bytes output
eth_underrun	(Optional) underruns
eth_outhw_switched	(Optional) Out H/W Switched
eth_outsw_switched	(Optional) Out S/W Switched
eth_outerr	(Optional) output errors
eth_coll	(Optional) collisions
eth_resets	(Optional) interface resets
eth_babbles	(Optional) babbles
eth_latecoll	(Optional) late collision
eth_deferred	(Optional) deferred
eth_lostcarrier	(Optional) lost carrier
eth_nocarrier	(Optional) no carrier
eth_outpause	(Optional) PAUSE output
eth_buffail	(Optional) output buffer failures
eth_bufswapped	(Optional) output buffers swapped out
eth_arpdrops	(Optional) arp drops
eth_out_ifdown_drops	(Optional) Output if-down drops
eth_single_coll	(Optional) single collisions
eth_multi_coll	(Optional) multi collisions
eth_excess_coll	(Optional) excessive collisions
eth_jabbers	(Optional) jabbers
eth_shortframe	(Optional) short frames
eth_indiscard	(Optional) discards
eth_bad_encap	(Optional) bad encapsulation
eth_outcrc	(Optional) Output CRC
eth_symbol	(Optional) symbol errors
eth_out_drops	(Optional) output drops
eth_sqetest	(Optional) SQE test
eth_inb64	(Optional) input pkts between 0 and 64 bytes
eth_inb65_127	(Optional) input pkts between 65 and 127 bytes
eth_inb128_255	(Optional) input pkts between 128 and 255 bytes
eth_inb256_511	(Optional) input pkts between 256 and 511 bytes
eth_inb512_1023	(Optional) input pkts between 512 and 1023 bytes
eth_inb1024_1518	(Optional) input pkts between 1024 and 1518 bytes
eth_inb1519_1548	(Optional) input pkts between 1519 and 1548 bytes
eth_intrunk	(Optional) input trunk pkts
eth_outb64	(Optional) output pkts between 0 and 64 bytes
eth_outb65_127	(Optional) output pkts between 65 and 127 bytes
eth_outb128_255	(Optional) output pkts between 128 and 255 bytes
eth_outb256_511	(Optional) output pkts between 256 and 511 bytes
eth_outb512_1023	(Optional) output pkts between 512 and 1023 bytes
eth_outb1024_1518	(Optional) output pkts between 1024 and 1518 bytes
eth_outb1519_1548	(Optional) output pkts between 1519 and 1548 bytes
eth_outtrunk	(Optional) output trunk pkts
eth_bpdu_outlost	(Optional) BPDU output lost
eth_cos0_outlost	(Optional) output pkts
eth_cos1_outlost	(Optional) output pkts
eth_cos2_outlost	(Optional) output pkts
eth_cos3_outlost	(Optional) output pkts
eth_cos4_outlost	(Optional) output pkts
eth_cos5_outlost	(Optional) output pkts
eth_cos6_outlost	(Optional) output pkts
eth_cos7_outlost	(Optional) output pkts
eth_fcoe_in_pkts	(Optional) fcoe in pkts
eth_fcoe_in_octets	(Optional) fcoe in octets
eth_fcoe_out_pkts	(Optional) fcoe out pkts
eth_fcoe_out_octets	(Optional) fcoe out octets
eth_nfcoe_in_pkts	(Optional) nfcoe in pkts
eth_nfcoe_in_octets	(Optional) nfcoe in octets
eth_nfcoe_out_pkts	(Optional) nfcoe out pkts
eth_nfcoe_out_octets	(Optional) nfcoe out octets
eth_eee_atx_lpi_msec	(Optional) Tx Lpi usec
eth_eee_arcv_lpi_msec	(Optional) Rx Lpi usec
eth_eee_atx_lpi_transitions	(Optional) Tx Lpi requests
eth_eee_arcv_lpi_transitions	(Optional) Rx Lpi indications
eth_phy_ber_count	(Optional) Bit error rate counter
eth_phy_errblks_count	(Optional) Errored blocks counter

Command Mode

/exec

show interface counters detailed cached

show interface <ifeth_ctr_dtl_all> counters detailed cached [ __readonly__ TABLE_interface <interface> [ <rx_total_pkts> ] [ <tx_total_pkts> ] [ <rx_ucast_pkts> ] [ <rx_mcast_pkts> ] [ <rx_bcast_pkts> ] [ <rx_octets> ] [ <tx_ucast_pkts> ] [ <tx_mcast_pkts> ] [ <tx_bcast_pkts> ] [ <tx_octets> ] [ <rxtx_pkts_64octets> ] [ <rxtx_pkts_65_127octets> ] [ <rxtx_pkts_128_255octets> ] [ <rxtx_pkts_256_511octets> ] [ <rxtx_pkts_512_1023octets> ] [ <rxtx_pkts_1024_1518octets> ] [ <rxtx_pkts_1519_1548octets> ] [ <rx_trunk_frames> ] [ <tx_trunk_frames> ] [ <rx_drop_events> ] [ <rxtx_giants> ] [ <eth_load_interval1_rx> ] [ <eth_inrate1_bits> ] [ <eth_inrate1_pkts> ] [ <eth_load_interval1_tx> ] [ <eth_outrate1_bits> ] [ <eth_outrate1_pkts> ] [ <eth_inrate1_summary_bits> ] [ <eth_inrate1_summary_pkts> ] [ <eth_outrate1_summary_bits> ] [ <eth_outrate1_summary_pkts> ] [ <eth_load_interval2_rx> ] [ <eth_inrate2_bits> ] [ <eth_inrate2_pkts> ] [ <eth_load_interval2_tx> ] [ <eth_outrate2_bits> ] [ <eth_outrate2_pkts> ] [ <eth_inrate2_summary_bits> ] [ <eth_inrate2_summary_pkts> ] [ <eth_outrate2_summary_bits> ] [ <eth_outrate2_summary_pkts> ] [ <eth_load_interval3_rx> ] [ <eth_inrate3_bits> ] [ <eth_inrate3_pkts> ] [ <eth_load_interval3_tx> ] [ <eth_outrate3_bits> ] [ <eth_outrate3_pkts> ] [ <eth_inrate3_summary_bits> ] [ <eth_inrate3_summary_pkts> ] [ <eth_outrate3_summary_bits> ] [ <eth_outrate3_summary_pkts> ] [ <eth_l2_ucastpkts> ] [ <eth_l2_ucastbytes> ] [ <eth_l2_mcastpkts> ] [ <eth_l2_mcastbytes> ] [ <eth_l2_bcastpkts> ] [ <eth_l2_bcastbytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_ucastbytes> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_mcastbytes> ] [ <eth_l3in_bcastpkts> ] [ <eth_l3in_bcastbytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_ucastbytes> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_mcastbytes> ] [ <eth_l3out_bcastpkts> ] [ <eth_l3out_bcastbytes> ] [ <eth_l3in_routed_pkts> ] [ <eth_l3in_routed_bytes> ] [ <eth_l3out_routed_pkts> ] [ <eth_l3out_routed_bytes> ] [ <eth_l3avg1_inbytes> ] [ <eth_l3avg1_inpkts> ] [ <eth_l3avg1_outbytes> ] [ <eth_l3avg1_outpkts> ] [ <eth_l3avg2_inbytes> ] [ <eth_l3avg2_inpkts> ] [ <eth_l3avg2_outbytes> ] [ <eth_l3avg2_outpkts> ] [ <eth_l3avg3_inbytes> ] [ <eth_l3avg3_inpkts> ] [ <eth_l3avg3_outbytes> ] [ <eth_l3avg3_outpkts> ] [ <eth_inpkts> ] [ <eth_inbytes> ] [ <eth_nobuf> ] [ <eth_inbcast> ] [ <eth_inmcast> ] [ <eth_inucast> ] [ <eth_ingiants> ] [ <eth_ipmcast> ] [ <eth_inhw_switched> ] [ <eth_insw_switched> ] [ <eth_runts> ] [ <eth_storm_supp> ] [ <eth_throtles> ] [ <eth_inerr> ] [ <eth_crc> ] [ <eth_ecc> ] [ <eth_frame> ] [ <eth_overrun> ] [ <eth_ignored> ] [ <eth_watchdog> ] [ <eth_outbcast> ] [ <eth_outmcast> ] [ <eth_outucast> ] [ <eth_outgiants> ] [ <eth_inpause> ] [ <eth_dribble> ] [ <eth_in_ifdown_drops> ] [ <eth_bad_eth> ] [ <eth_bad_proto> ] [ <eth_outpkts> ] [ <eth_outbytes> ] [ <eth_underrun> ] [ <eth_outhw_switched> ] [ <eth_outsw_switched> ] [ <eth_outerr> ] [ <eth_coll> ] [ <eth_resets> ] [ <eth_babbles> ] [ <eth_latecoll> ] [ <eth_deferred> ] [ <eth_lostcarrier> ] [ <eth_nocarrier> ] [ <eth_outpause> ] [ <eth_buffail> ] [ <eth_bufswapped> ] [ <eth_arpdrops> ] [ <eth_out_ifdown_drops> ] [ <eth_single_coll> ] [ <eth_multi_coll> ] [ <eth_excess_coll> ] [ <eth_jabbers> ] [ <eth_shortframe> ] [ <eth_indiscard> ] [ <eth_bad_encap> ] [ <eth_outcrc> ] [ <eth_symbol> ] [ <eth_out_drops> ] [ <eth_sqetest> ] [ <eth_inb64> ] [ <eth_inb65_127> ] [ <eth_inb128_255> ] [ <eth_inb256_511> ] [ <eth_inb512_1023> ] [ <eth_inb1024_1518> ] [ <eth_inb1519_1548> ] [ <eth_intrunk> ] [ <eth_outb64> ] [ <eth_outb65_127> ] [ <eth_outb128_255> ] [ <eth_outb256_511> ] [ <eth_outb512_1023> ] [ <eth_outb1024_1518> ] [ <eth_outb1519_1548> ] [ <eth_outtrunk> ] [ <eth_bpdu_outlost> ] [ <eth_cos0_outlost> ] [ <eth_cos1_outlost> ] [ <eth_cos2_outlost> ] [ <eth_cos3_outlost> ] [ <eth_cos4_outlost> ] [ <eth_cos5_outlost> ] [ <eth_cos6_outlost> ] [ <eth_cos7_outlost> ] [ <eth_fcoe_in_pkts> ] [ <eth_fcoe_in_octets> ] [ <eth_fcoe_out_pkts> ] [ <eth_fcoe_out_octets> ] [ <eth_nfcoe_in_pkts> ] [ <eth_nfcoe_in_octets> ] [ <eth_nfcoe_out_pkts> ] [ <eth_nfcoe_out_octets> ] [ <eth_eee_atx_lpi_msec> ] [ <eth_eee_arcv_lpi_msec> ] [ <eth_eee_atx_lpi_transitions> ] [ <eth_eee_arcv_lpi_transitions> ] [ <eth_phy_ber_count> ] [ <eth_phy_errblks_count> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifeth_ctr_dtl_all	Enter interface type and number in module/slot format
counters	Show interface counters
detailed	Show only non-zero counters
cached	everything cached
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
rx_total_pkts	(Optional) total input packets
tx_total_pkts	(Optional) total output packets
rx_ucast_pkts	(Optional) input unicasts
rx_mcast_pkts	(Optional) input multicasts
rx_bcast_pkts	(Optional) input broadcasts
rx_octets	(Optional) input bytes
tx_ucast_pkts	(Optional) output unicasts
tx_mcast_pkts	(Optional) output multicasts
tx_bcast_pkts	(Optional) output broadcasts
tx_octets	(Optional) output bytes
rxtx_pkts_64octets	(Optional) all pkts between 0 and 64 bytes
rxtx_pkts_65_127octets	(Optional) all pkts between 65 and 127 bytes
rxtx_pkts_128_255octets	(Optional) all pkts between 128 and 255 bytes
rxtx_pkts_256_511octets	(Optional) all pkts between 256 and 511 bytes
rxtx_pkts_512_1023octets	(Optional) all pkts between 512 and 1023 bytes
rxtx_pkts_1024_1518octets	(Optional) all pkts between 1024 and 1518 bytes
rxtx_pkts_1519_1548octets	(Optional) all pkts between 1519 and 1548 bytes
rx_trunk_frames	(Optional) input trunk pkts
tx_trunk_frames	(Optional) output trunk pkts
rx_drop_events	(Optional) dropped pkts
rxtx_giants	(Optional) giants
eth_load_interval1_rx	(Optional) interval 1 timer value in sec
eth_inrate1_bits	(Optional) interval 1 input rate bits/sec
eth_inrate1_pkts	(Optional) interval 1 input rate pkts/sec
eth_load_interval1_tx	(Optional) interval 1 timer value in sec
eth_outrate1_bits	(Optional) interval 1 output rate bits/sec
eth_outrate1_pkts	(Optional) interval 1 output rate pkts/sec
eth_inrate1_summary_bits	(Optional) interval 1 input rate bit summary
eth_inrate1_summary_pkts	(Optional) interval 1 input rate pkt summary
eth_outrate1_summary_bits	(Optional) interval 1 output rate bit summary
eth_outrate1_summary_pkts	(Optional) interval 1 output rate pkt summary
eth_load_interval2_rx	(Optional) interval 2 timer value in sec
eth_inrate2_bits	(Optional) interval 2 input rate bits/sec
eth_inrate2_pkts	(Optional) interval 2 input rate pkts/sec
eth_load_interval2_tx	(Optional) interval 2 timer value in sec
eth_outrate2_bits	(Optional) interval 2 output rate bits/sec
eth_outrate2_pkts	(Optional) interval 2 output rate pkts/sec
eth_inrate2_summary_bits	(Optional) interval 2 input rate bit summary
eth_inrate2_summary_pkts	(Optional) interval 2 input rate pkt summary
eth_outrate2_summary_bits	(Optional) interval 2 output rate bit summary
eth_outrate2_summary_pkts	(Optional) interval 2 output rate pkt summary
eth_load_interval3_rx	(Optional) interval 3 timer value in sec
eth_inrate3_bits	(Optional) interval 3 input rate bits/sec
eth_inrate3_pkts	(Optional) interval 3 input rate pkts/sec
eth_load_interval3_tx	(Optional) interval 3 timer value in sec
eth_outrate3_bits	(Optional) interval 3 output rate bits/sec
eth_outrate3_pkts	(Optional) interval 3 output rate pkts/sec
eth_inrate3_summary_bits	(Optional) interval 3 input rate bit summary
eth_inrate3_summary_pkts	(Optional) interval 3 input rate pkt summary
eth_outrate3_summary_bits	(Optional) interval 3 output rate bit summary
eth_outrate3_summary_pkts	(Optional) interval 3 output rate pkt summary
eth_l2_ucastpkts	(Optional) L2 switched ucast pkts
eth_l2_ucastbytes	(Optional) L2 switched ucast bytes
eth_l2_mcastpkts	(Optional) L2 switched mcast pkts
eth_l2_mcastbytes	(Optional) L2 switched mcast bytes
eth_l2_bcastpkts	(Optional) L2 switched bcast pkts
eth_l2_bcastbytes	(Optional) L2 switched bcast bytes
eth_l3in_ucastpkts	(Optional) IPv4 L3 in switched ucast pkts
eth_l3in_ucastbytes	(Optional) IPv4 L3 in switched ucast bytes
eth_l3in_mcastpkts	(Optional) IPv4 L3 in switched mcast pkts
eth_l3in_mcastbytes	(Optional) IPv4 L3 in switched mcast bytes
eth_l3in_bcastpkts	(Optional) L3 in switched bcast pkts
eth_l3in_bcastbytes	(Optional) L3 in switched bcast bytes
eth_l3out_ucastpkts	(Optional) IPv4 L3 out switched ucast pkts
eth_l3out_ucastbytes	(Optional) IPv4 L3 out switched ucast bytes
eth_l3out_mcastpkts	(Optional) IPv4 L3 out switched mcast pkts
eth_l3out_mcastbytes	(Optional) IPv4 L3 out switched mcast bytes
eth_l3out_bcastpkts	(Optional) L3 out switched bcast pkts
eth_l3out_bcastbytes	(Optional) L3 out switched bcast bytes
eth_l3in_routed_pkts	(Optional) L3 in routed pkts
eth_l3in_routed_bytes	(Optional) L3 in routed bytes
eth_l3out_routed_pkts	(Optional) L3 out routed pkts
eth_l3out_routed_bytes	(Optional) L3 out routed bytes
eth_l3avg1_inbytes	(Optional) Load interval 1 L3 average in switched bytes
eth_l3avg1_inpkts	(Optional) Load interval 1 L3 average in switched pkts
eth_l3avg1_outbytes	(Optional) Load interval 1 L3 average out switched bytes
eth_l3avg1_outpkts	(Optional) Load interval 1 L3 average out switched pkts
eth_l3avg2_inbytes	(Optional) Load interval 2 L3 average in switched bytes
eth_l3avg2_inpkts	(Optional) Load interval 2 L3 average in switched pkts
eth_l3avg2_outbytes	(Optional) Load interval 2 L3 average out switched bytes
eth_l3avg2_outpkts	(Optional) Load interval 2 L3 average out switched pkts
eth_l3avg3_inbytes	(Optional) Load interval 3 L3 average in switched bytes
eth_l3avg3_inpkts	(Optional) Load interval 3 L3 average in switched pkts
eth_l3avg3_outbytes	(Optional) Load interval 3 L3 average out switched bytes
eth_l3avg3_outpkts	(Optional) Load interval 3 L3 average out switched pkts
eth_inpkts	(Optional) Packets input
eth_inbytes	(Optional) Bytes input
eth_nobuf	(Optional) No buffer received
eth_inbcast	(Optional) Broadcasts
eth_inmcast	(Optional) Multicasts
eth_inucast	(Optional) Unicasts
eth_ingiants	(Optional) giants
eth_ipmcast	(Optional) IP multicast
eth_inhw_switched	(Optional) Input H/W Switched
eth_insw_switched	(Optional) Input S/W Switched
eth_runts	(Optional) runts
eth_storm_supp	(Optional) storm suppression
eth_throtles	(Optional) throttles
eth_inerr	(Optional) input errors
eth_crc	(Optional) CRC
eth_ecc	(Optional) ECC
eth_frame	(Optional) frame
eth_overrun	(Optional) overrun
eth_ignored	(Optional) ignored
eth_watchdog	(Optional) watchdog
eth_outbcast	(Optional) Broadcasts
eth_outmcast	(Optional) Multicasts
eth_outucast	(Optional) Unicasts
eth_outgiants	(Optional) giants
eth_inpause	(Optional) pause input
eth_dribble	(Optional) input packets with dribble condition
eth_in_ifdown_drops	(Optional) Input if-down drops
eth_bad_eth	(Optional) bad ether type drop
eth_bad_proto	(Optional) bad protocol drops
eth_outpkts	(Optional) packets output
eth_outbytes	(Optional) bytes output
eth_underrun	(Optional) underruns
eth_outhw_switched	(Optional) Out H/W Switched
eth_outsw_switched	(Optional) Out S/W Switched
eth_outerr	(Optional) output errors
eth_coll	(Optional) collisions
eth_resets	(Optional) interface resets
eth_babbles	(Optional) babbles
eth_latecoll	(Optional) late collision
eth_deferred	(Optional) deferred
eth_lostcarrier	(Optional) lost carrier
eth_nocarrier	(Optional) no carrier
eth_outpause	(Optional) PAUSE output
eth_buffail	(Optional) output buffer failures
eth_bufswapped	(Optional) output buffers swapped out
eth_arpdrops	(Optional) arp drops
eth_out_ifdown_drops	(Optional) Output if-down drops
eth_single_coll	(Optional) single collisions
eth_multi_coll	(Optional) multi collisions
eth_excess_coll	(Optional) excessive collisions
eth_jabbers	(Optional) jabbers
eth_shortframe	(Optional) short frames
eth_indiscard	(Optional) discards
eth_bad_encap	(Optional) bad encapsulation
eth_outcrc	(Optional) Output CRC
eth_symbol	(Optional) symbol errors
eth_out_drops	(Optional) output drops
eth_sqetest	(Optional) SQE test
eth_inb64	(Optional) input pkts between 0 and 64 bytes
eth_inb65_127	(Optional) input pkts between 65 and 127 bytes
eth_inb128_255	(Optional) input pkts between 128 and 255 bytes
eth_inb256_511	(Optional) input pkts between 256 and 511 bytes
eth_inb512_1023	(Optional) input pkts between 512 and 1023 bytes
eth_inb1024_1518	(Optional) input pkts between 1024 and 1518 bytes
eth_inb1519_1548	(Optional) input pkts between 1519 and 1548 bytes
eth_intrunk	(Optional) input trunk pkts
eth_outb64	(Optional) output pkts between 0 and 64 bytes
eth_outb65_127	(Optional) output pkts between 65 and 127 bytes
eth_outb128_255	(Optional) output pkts between 128 and 255 bytes
eth_outb256_511	(Optional) output pkts between 256 and 511 bytes
eth_outb512_1023	(Optional) output pkts between 512 and 1023 bytes
eth_outb1024_1518	(Optional) output pkts between 1024 and 1518 bytes
eth_outb1519_1548	(Optional) output pkts between 1519 and 1548 bytes
eth_outtrunk	(Optional) output trunk pkts
eth_bpdu_outlost	(Optional) BPDU output lost
eth_cos0_outlost	(Optional) output pkts
eth_cos1_outlost	(Optional) output pkts
eth_cos2_outlost	(Optional) output pkts
eth_cos3_outlost	(Optional) output pkts
eth_cos4_outlost	(Optional) output pkts
eth_cos5_outlost	(Optional) output pkts
eth_cos6_outlost	(Optional) output pkts
eth_cos7_outlost	(Optional) output pkts
eth_fcoe_in_pkts	(Optional) fcoe in pkts
eth_fcoe_in_octets	(Optional) fcoe in octets
eth_fcoe_out_pkts	(Optional) fcoe out pkts
eth_fcoe_out_octets	(Optional) fcoe out octets
eth_nfcoe_in_pkts	(Optional) nfcoe in pkts
eth_nfcoe_in_octets	(Optional) nfcoe in octets
eth_nfcoe_out_pkts	(Optional) nfcoe out pkts
eth_nfcoe_out_octets	(Optional) nfcoe out octets
eth_eee_atx_lpi_msec	(Optional) Tx Lpi usec
eth_eee_arcv_lpi_msec	(Optional) Rx Lpi usec
eth_eee_atx_lpi_transitions	(Optional) Tx Lpi requests
eth_eee_arcv_lpi_transitions	(Optional) Rx Lpi indications
eth_phy_ber_count	(Optional) Bit error rate counter
eth_phy_errblks_count	(Optional) Errored blocks counter

Command Mode

/exec

show interface counters details

show interface <ifid_ctrs_det> counters details [ __readonly__ TABLE_interface <interface> [ <fcoe_in_pkts> ] [ <fcoe_in_octets> ] [ <fcoe_out_pkts> ] [ <fcoe_out_octets> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid_ctrs_det	Enter interface type and number in module/slot format
counters	Show interface counters
details	Show interface counters in detail
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
fcoe_in_pkts	(Optional) fcoe in pkts
fcoe_in_octets	(Optional) fcoe in octets
fcoe_out_pkts	(Optional) fcoe out pkts
fcoe_out_octets	(Optional) fcoe out octets

Command Mode

/exec

show interface counters details

show interface <ifid_ctrs_det2> counters details [ __readonly__ TABLE_ifid_counters [ <sfp> <in_frames> <in_bytes> <class_2_frames> <class_2_in_bytes> <class_2_in_discards> <class_2_in_f_bsy_frames> <class_2_in_f_rgt_frames> <class_2_in_port_reject_frames> <class_3_frames> <class_3_bytes_recv> <class_f_frames> <class_f_bytes_recv> <class_f_in_discards> <class_f_errors_recvd> <class_f_out_discards> <class_f_errors_trans> <out_frames> <out_bytes> <class_2_out_frames> <class_2_bytes_trans> <class_3_out_frames> <class_3_bytes_trans> <class_3_out_discards> <class_f_out_frames> <class_f_bytes_trans> <class_f_discards> <muticast_rcvd> <multicast_trans> <broadcast_rcvd> <broadcast_trans> <unicast_rcvd> <unicast_trans> <timeout_discards> <credit_loss> <link_faliures> <sync_loss> <signal_loss> <prm_seq_pro_err> <inv_trans_err> <inv_crc> <delim_err> <addr_iden_err> <link_reset_rcvd> <link_reset_trans> <off_seq_err_rcvd> <off_seq_err_trans> <frames_rcvd_short> <frames_rcvd_long> <txwait> <frames_rcvd_greater> <frame_rcvd_short_header> <link_reset_resp_rcvd> <link_reset_resp_trans> <non_oper_seq_rcvd> <non_oper_seq_trans> <frag_frames_rcvd> <frames_eof_abort> <unknown_class_frames_rcvd> <8b10b_disparity_err> <frames_discard> <ex_link_param_sw_fab> [ <in_link_ser_req_faliures> ] <b2b_credits_transmit> <b2b_credits_receive> <eisl_frames> <framing_err> <f8_lip_seq_err_rcvd> <f8_lip_seq_err_issued> <non_f8_lip_seq_err_rcvd> <non_f8_lip_seq_err_issued> [ <fec_corrected> ] [ <fec_uncorrected> ] ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid_ctrs_det2	Enter interface type and number in module/slot format
counters	Show interface counters
details	Show interface counters in detail
__readonly__	(Optional)
TABLE_ifid_counters	(Optional) show interface counters
sfp	(Optional) SFP
in_frames	(Optional) in frames
in_bytes	(Optional) in bytes
class_2_frames	(Optional) Class 2 frames
class_2_in_bytes	(Optional) Class 2 bytes received
class_2_in_discards	(Optional) Class 2 discards received
class_2_in_f_bsy_frames	(Optional) Class 2 F_BSY frames received
class_2_in_f_rgt_frames	(Optional) Class 2 F_RGT frames
class_2_in_port_reject_frames	(Optional) Class 2 port reject frames
class_3_frames	(Optional) Class 3 frames
class_3_bytes_recv	(Optional) Class 3 bytes received
class_f_frames	(Optional) Class f frames
class_f_bytes_recv	(Optional) Class F bytes received
class_f_in_discards	(Optional) Class F in discards
class_f_errors_recvd	(Optional) Class F errors received
class_f_out_discards	(Optional) Class F out discards
class_f_errors_trans	(Optional) Class F errors transmitted
out_frames	(Optional) Out frames
out_bytes	(Optional) Out bytes
class_2_out_frames	(Optional) Class 2 frames transmitted
class_2_bytes_trans	(Optional) Class 2 bytes transmitted
class_3_out_frames	(Optional) Class 3 frames transmitted
class_3_bytes_trans	(Optional) Class 3 bytes transmitted
class_3_out_discards	(Optional) Class 3 out discards
class_f_out_frames	(Optional) Class F out frames
class_f_bytes_trans	(Optional) Class F bytes transmitted
class_f_discards	(Optional) Class F discards
muticast_rcvd	(Optional) Multicast received
multicast_trans	(Optional) Muticast transmitted
broadcast_rcvd	(Optional) Broadcast received
broadcast_trans	(Optional) Broadcast transmitted
unicast_rcvd	(Optional) Unicast received
unicast_trans	(Optional) Unicast transmitted
timeout_discards	(Optional) timeout discards
credit_loss	(Optional) credit loss
link_faliures	(Optional) Link faliures
sync_loss	(Optional) Sync Loss
signal_loss	(Optional) Signal Loss
prm_seq_pro_err	(Optional) primitive sequence protocol errors
inv_trans_err	(Optional) invaid transmission errors
inv_crc	(Optional) Invalid crc
delim_err	(Optional) Delimiter Errors
addr_iden_err	(Optional) Address Identification errors
link_reset_rcvd	(Optional) link reset received
link_reset_trans	(Optional) link reset transmitted
off_seq_err_rcvd	(Optional) Offine sequence error received
off_seq_err_trans	(Optional) Offline sequence Error transmitted
frames_rcvd_short	(Optional) frames received that are shorter than the minimum allowable frame length regardless of the CRC/FCS error
frames_rcvd_long	(Optional) frames received that are longer than the minimum allowable frame length regardless of the CRC/FCS error
txwait	(Optional) TXwait
frames_rcvd_greater	(Optional) frames received with length greater than what was agreed to in FLOGI/PLOGI
frame_rcvd_short_header	(Optional) frames received with length less than the minimum indicated by the frame header
link_reset_resp_rcvd	(Optional) Link reset responses received
link_reset_resp_trans	(Optional) Link reset responses transmitted
non_oper_seq_rcvd	(Optional) Non operational sequence received
non_oper_seq_trans	(Optional) Non operational sequence transmitted
frag_frames_rcvd	(Optional) fragmented frames received
frames_eof_abort	(Optional) frames EOF abort
unknown_class_frames_rcvd	(Optional) unknown class frames received
8b10b_disparity_err	(Optional) 8b10b disparity errors
frames_discard	(Optional) frames discard
ex_link_param_sw_fab	(Optional) external link parameters switch fabric
in_link_ser_req_faliures	(Optional) internal link serial request faliures
b2b_credits_transmit	(Optional) B2B credits transmit
b2b_credits_receive	(Optional) B2B credits receive
eisl_frames	(Optional) EISL frames
framing_err	(Optional) Framing Error
f8_lip_seq_err_rcvd	(Optional) f8 LIP sequence error received
f8_lip_seq_err_issued	(Optional) f8 LIP sequence error issued
non_f8_lip_seq_err_rcvd	(Optional) non f8 LIP sequence error received
non_f8_lip_seq_err_issued	(Optional) non f8 LIP sequence error issued
fec_corrected	(Optional) fec corrected blocks
fec_uncorrected	(Optional) fec uncorrected blocks

Command Mode

/exec

show interface counters errors

show interface counters errors [ module <module> ] [ non-zero ] [ __readonly__ TABLE_interface <interface> [ <eth_align_err> ] [ <eth_fcs_err> ] [ <eth_xmit_err> ] [ <eth_rcv_err> ] [ <eth_undersize> ] [ <eth_outdisc> ] [ <eth_single_col> ] [ <eth_multi_col> ] [ <eth_late_col> ] [ <eth_excess_col> ] [ <eth_carri_sen> ] [ <eth_runts> ] [ <eth_giants> ] [ <eth_sqetest_err> ] [ <eth_deferred_tx> ] [ <eth_inmactx_err> ] [ <eth_inmacrx_err> ] [ <eth_symbol_err> ] [ <eth_indisc> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
counters	Show interface counters
errors	Show interface error counters
module	(Optional) Limit display to interfaces on module
module	(Optional) Enter module number
non-zero	(Optional) Display only the non-zero error values
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
eth_align_err	(Optional) Align error
eth_fcs_err	(Optional) FCS error
eth_xmit_err	(Optional) Transmit error
eth_rcv_err	(Optional) Receive error
eth_undersize	(Optional) Undersize
eth_outdisc	(Optional) Out discard
eth_single_col	(Optional) Single collision
eth_multi_col	(Optional) Multiple collision
eth_late_col	(Optional) Late collision
eth_excess_col	(Optional) Excess collision
eth_carri_sen	(Optional) Carrier sense
eth_runts	(Optional) Runts
eth_giants	(Optional) Giants
eth_sqetest_err	(Optional) SQETest error
eth_deferred_tx	(Optional) Deferred tx
eth_inmactx_err	(Optional) In MAC tx
eth_inmacrx_err	(Optional) In MAC rx
eth_symbol_err	(Optional) Symbol error
eth_indisc	(Optional) In discards

Command Mode

/exec

show interface counters errors

show interface <ifeth_ctr_errs> counters errors [ snmp ] [ __readonly__ TABLE_interface <interface> [ <eth_align_err> ] [ <eth_fcs_err> ] [ <eth_xmit_err> ] [ <eth_rcv_err> ] [ <eth_undersize> ] [ <eth_outdisc> ] [ <eth_single_col> ] [ <eth_multi_col> ] [ <eth_late_col> ] [ <eth_excess_col> ] [ <eth_carri_sen> ] [ <eth_runts> ] [ <eth_giants> ] [ <eth_sqetest_err> ] [ <eth_deferred_tx> ] [ <eth_inmactx_err> ] [ <eth_inmacrx_err> ] [ <eth_symbol_err> ] [ <eth_indisc> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifeth_ctr_errs	Enter interface type and number in module/slot format
counters	Show interface counters
errors	Show interface error counters
snmp	(Optional) Show SNMP MIB values
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
eth_align_err	(Optional) Align error
eth_fcs_err	(Optional) FCS error
eth_xmit_err	(Optional) Transmit error
eth_rcv_err	(Optional) Receive error
eth_undersize	(Optional) Undersize
eth_outdisc	(Optional) Out discard
eth_single_col	(Optional) Single collision
eth_multi_col	(Optional) Multiple collision
eth_late_col	(Optional) Late collision
eth_excess_col	(Optional) Excess collision
eth_carri_sen	(Optional) Carrier sense
eth_runts	(Optional) Runts
eth_giants	(Optional) Giants
eth_sqetest_err	(Optional) SQETest error
eth_deferred_tx	(Optional) Deferred tx
eth_inmactx_err	(Optional) In MAC tx
eth_inmacrx_err	(Optional) In MAC rx
eth_symbol_err	(Optional) Symbol error
eth_indisc	(Optional) In discards

Command Mode

/exec

show interface counters errors

show interface <loop_ctr_errs> counters errors

Syntax Description


show	Show running system information
interface	Show interface status and information
loop_ctr_errs	Enter interface type and number in module/slot format
counters	Show interface counters
errors	Show interface error counters

Command Mode

/exec

show interface counters snmp

show interface counters snmp [ module <module> ] [ __readonly__ { TABLE_rx_counters <interface> <eth_inpkts> [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_l3in_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_bcastpkts> ] } { TABLE_tx_counters <interface> <eth_outpkts> [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_l3out_bytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_bcastpkts> ] } ]

Syntax Description


show	Show running system information
interface	Show interface status and information
counters	Show interface counters
snmp	Show SNMP MIB values
module	(Optional) Limit display to interfaces on module
module	(Optional) Enter module number
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_rx_counters	(Optional) show Rx counters
TABLE_tx_counters	(Optional) show Tx counters
eth_inpkts	(Optional) Packets input
eth_inucast	(Optional) Unicasts
eth_inmcast	(Optional) Multicasts
eth_inbcast	(Optional) Broadcasts
eth_outpkts	(Optional) Packets output
eth_outucast	(Optional) Unicasts
eth_outmcast	(Optional) Multicasts
eth_outbcast	(Optional) Broadcasts
eth_l3in_bytes	(Optional) L3 Rx bytes
eth_l3in_ucastpkts	(Optional) L3 Rx Unicast pkts
eth_l3in_mcastpkts	(Optional) L3 Rx Multicast pkts
eth_l3in_bcastpkts	(Optional) L3 Rx Broadcast pkts
eth_l3out_bytes	(Optional) L3 Tx bytes
eth_l3out_ucastpkts	(Optional) L3 Tx Unicast pkts
eth_l3out_mcastpkts	(Optional) L3 Tx Multicast pkts
eth_l3out_bcastpkts	(Optional) L3 Tx Broadcast pkts

Command Mode

/exec

show interface counters storm-control

show interface <ifeth_ctr_stm_ctrl> counters storm-control [ __readonly__ TABLE_interface <interface> <eth_ucast_supp> <eth_mcast_supp> <eth_bcast_supp> <eth_total_supp> <supp_action> ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifeth_ctr_stm_ctrl	Enter interface type and number in module/slot format
counters	Show interface counters
storm-control	Show interface storm-control counters
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
eth_ucast_supp	(Optional) Unicast suppression percentage
eth_mcast_supp	(Optional) Multicast suppression percentage
eth_bcast_supp	(Optional) Broadcast suppression percentage
eth_total_supp	(Optional) Total discarded due to suppression
supp_action	(Optional) Action to be taken on suppression

Command Mode

/exec

show interface counters storm-control

show interface counters storm-control [ module <module> ] [ __readonly__ TABLE_interface <interface> <eth_ucast_supp> <eth_mcast_supp> <eth_bcast_supp> <eth_total_supp> <supp_action> ]

Syntax Description


show	Show running system information
interface	Show interface status and information
counters	Show interface counters
storm-control	Show interface storm-control counters
module	(Optional) Limit display to interfaces on module
module	(Optional) Enter module number
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
eth_ucast_supp	(Optional) Unicast suppression percentage
eth_mcast_supp	(Optional) Multicast suppression percentage
eth_bcast_supp	(Optional) Broadcast suppression percentage
eth_total_supp	(Optional) Total discarded due to suppression
supp_action	(Optional) Action to be taken on suppression

Command Mode

/exec

show interface counters table

show interface counters table [ verbose ]

Syntax Description


show	Show running system information
interface	Show interface status and information
counters	Show interface counters
table	format counters in a table
verbose	(Optional) show errors counts after counters

Command Mode

/exec

show interface counters trunk

show interface <ifeth_ctr_trnk> counters trunk [ __readonly__ TABLE_interface <interface> [ <eth_trunk_frames_tx> ] [ <eth_trunk_frames_rx> ] [ <eth_wrong_encap> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifeth_ctr_trnk	Enter interface type and number in module/slot format
counters	Show interface counters
trunk	Show interface trunk counters
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
eth_trunk_frames_tx	(Optional) Trunk frame transmitted
eth_trunk_frames_rx	(Optional) Trunk frames received
eth_wrong_encap	(Optional) Wrong encapsulation

Command Mode

/exec

show interface dampening

show interface dampening [ __readonly__ { [ TABLE_vrf_dampen <vrf> [ TABLE_interface_dampen <interface> <Flaps> <Penalty> <Supp> <ReuseTm> <HalfL> <ReuseV> <SuppV> <MaxSTm> <MaxP> <Restart> ] ] } ]

Syntax Description


show	Show running system information
interface	Show interface status and information
dampening	Show interface dampening info
__readonly__	(Optional) Read Only
TABLE_vrf_dampen	(Optional) show interface vrf dampening
vrf	(Optional) Vrf membership
TABLE_interface_dampen	(Optional) show interface dampening
interface	(Optional) Interface index
Flaps	(Optional) Number of times that an interface has flapped
Penalty	(Optional) Accumulated penalty
Supp	(Optional) Indicates if the interface is dampened
ReuseTm	(Optional) Reuse timer
HalfL	(Optional) Half-life counter
ReuseV	(Optional) Reuse threshold timer
SuppV	(Optional) Suppress threshold
MaxSTm	(Optional) Maximum suppress
MaxP	(Optional) Maximum penalty
Restart	(Optional) Restart timer

Command Mode

/exec

show interface debounce

show interface <ifeth_dbnc> debounce [ __readonly__ TABLE_interface <interface> <debounce> <debounce_val> ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifeth_dbnc	Enter interface type and number in module/slot format
debounce	Show interface debounce time information
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
debounce	(Optional) Debounce time
debounce_val	(Optional) Value(ms)

Command Mode

/exec

show interface debounce

show interface debounce [ __readonly__ TABLE_interface <interface> <debounce> <debounce_val> ]

Syntax Description


show	Show running system information
interface	Show interface status and information
debounce	Show interface debounce time information
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
debounce	(Optional) Debounce time
debounce_val	(Optional) Value(ms)

Command Mode

/exec

show interface description

show interface <ifid_desc1> description [ __readonly__ TABLE_interface <interface_fc> [ <desc_fc> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid_desc1	Enter interface type and number in module/slot format
description	Show interface description
__readonly__	(Optional) Read Only
interface_fc	(Optional) Interface index
TABLE_interface	(Optional) show interface
desc_fc	(Optional) Description

Command Mode

/exec

show interface description

show interface <ifid> description [ __readonly__ <start> <if_index> <LINE> ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid	VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19
description	Interface specific description
__readonly__	(Optional) Read Only
start	(Optional) Start
if_index	(Optional) Interface
LINE	(Optional) Description

Command Mode

/exec

show interface description

show interface description [ __readonly__ TABLE_interface <interface> [ <state> ] [ <type> ] [ <speed> ] [ <protocol> ] [ <desc> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
description	Show interface description
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
type	(Optional) Type
speed	(Optional) Speed
protocol	(Optional) Protocol
desc	(Optional) Description

Command Mode

/exec

show interface description

show interface <ifid_mgmt_loop> description [ __readonly__ TABLE_interface <interface> [ <state> ] [ <protocol> ] [ <desc> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid_mgmt_loop	Enter interface type and number in module/slot format
description	Show interface description
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
protocol	(Optional) Protocol
desc	(Optional) Description

Command Mode

/exec

show interface description

show interface <ifid_eth> description [ __readonly__ TABLE_interface <interface> [ <state> ] [ <type> ] [ <speed> ] [ <protocol> ] [ <desc> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid_eth	Enter interface type and number in module/slot format
description	Show interface description
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
type	(Optional) Type
speed	(Optional) Speed
protocol	(Optional) Protocol
desc	(Optional) Description

Command Mode

/exec

show interface description

show interface <iftun_desc> description [ __readonly__ TABLE_interface <interface> <state> <protocol> <desc> ]

Syntax Description


show	Show running system information
interface	Show interface status and information
iftun_desc	Enter tunnel interface number
description	Show interface description
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
protocol	(Optional) Protocol
desc	(Optional) Description

Command Mode

/exec

show interface description

show interface <ifrange> description [ __readonly__ TABLE_interface <interface> <state> <protocol> <desc> ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifrange	Enter tunnel interface number
description	Show interface description
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
protocol	(Optional) Protocol
desc	(Optional) Description

Command Mode

/exec

show interface description

show interface <ifrange> description [ __readonly__ TABLE_interface <interface> <state> <protocol> <desc> ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifrange	Enter tunnel interface number
description	Show interface description
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
state	(Optional) Interface state
protocol	(Optional) Protocol
desc	(Optional) Description

Command Mode

/exec

show interface detail-counters

show interface detail-counters [ __readonly__ [ { TABLE_counters <sfp> <in_frames> <in_bytes> <class_2_frames> <class_2_in_bytes> <class_2_in_discards> <class_2_in_f_bsy_frames> <class_2_in_f_rgt_frames> <class_2_in_port_reject_frames> <class_3_frames> <class_3_bytes_recv> <class_f_frames> <class_f_bytes_recv> <class_f_in_discards> <class_f_errors_recvd> <class_f_out_discards> <class_f_errors_trans> <out_frames> <out_bytes> <class_2_out_frames> <class_2_bytes_trans> <class_3_out_frames> <class_3_bytes_trans> <class_3_out_discards> <class_f_out_frames> <class_f_bytes_trans> <class_f_discards> <muticast_rcvd> <multicast_trans> <broadcast_rcvd> <broadcast_trans> <unicast_rcvd> <unicast_trans> <timeout_discards> <credit_loss> <link_faliures> <sync_loss> <signal_loss> <prm_seq_pro_err> <inv_trans_err> <inv_crc> <delim_err> <addr_iden_err> <link_reset_rcvd> <link_reset_trans> <off_seq_err_rcvd> <off_seq_err_trans> <frames_rcvd_short> <frames_rcvd_long> <txwait> <frames_rcvd_greater> <frame_rcvd_short_header> <link_reset_resp_rcvd> <link_reset_resp_trans> <non_oper_seq_rcvd> <non_oper_seq_trans> <frag_frames_rcvd> <frames_eof_abort> <unknown_class_frames_rcvd> <8b10b_disparity_err> <frames_discard> <ex_link_param_sw_fab> [ <in_link_ser_req_faliures> ] <b2b_credits_transmit> <b2b_credits_receive> <eisl_frames> <framing_err> <f8_lip_seq_err_rcvd> <f8_lip_seq_err_issued> <non_f8_lip_seq_err_rcvd> <non_f8_lip_seq_err_issued> [ <fec_corrected> ] [ <fec_uncorrected> ] } ] [ { TABLE_interface <interface> [ <fcoe_in_pkts> ] [ <fcoe_in_octets> ] [ <fcoe_out_pkts> ] [ <fcoe_out_octets> ] } ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
detail-counters	Show interface counters in detail
__readonly__	(Optional)
TABLE_counters	(Optional) show interface counters
sfp	(Optional) SFP
in_frames	(Optional) in frames
in_bytes	(Optional) in bytes
class_2_frames	(Optional) Class 2 frames
class_2_in_bytes	(Optional) Class 2 bytes received
class_2_in_discards	(Optional) Class 2 discards received
class_2_in_f_bsy_frames	(Optional) Class 2 F_BSY frames received
class_2_in_f_rgt_frames	(Optional) Class 2 F_RGT frames
class_2_in_port_reject_frames	(Optional) Class 2 port reject frames
class_3_frames	(Optional) Class 3 frames
class_3_bytes_recv	(Optional) Class 3 bytes received
class_f_frames	(Optional) Class f frames
class_f_bytes_recv	(Optional) Class F bytes received
class_f_in_discards	(Optional) Class F in discards
class_f_errors_recvd	(Optional) Class F errors received
class_f_out_discards	(Optional) Class F out discards
class_f_errors_trans	(Optional) Class F errors transmitted
out_frames	(Optional) Out frames
out_bytes	(Optional) Out bytes
class_2_out_frames	(Optional) Class 2 frames transmitted
class_2_bytes_trans	(Optional) Class 2 bytes transmitted
class_3_out_frames	(Optional) Class 3 frames transmitted
class_3_bytes_trans	(Optional) Class 3 bytes transmitted
class_3_out_discards	(Optional) Class 3 out discards
class_f_out_frames	(Optional) Class F out frames
class_f_bytes_trans	(Optional) Class F bytes transmitted
class_f_discards	(Optional) Class F discards
muticast_rcvd	(Optional) Multicast received
multicast_trans	(Optional) Muticast transmitted
broadcast_rcvd	(Optional) Broadcast received
broadcast_trans	(Optional) Broadcast transmitted
unicast_rcvd	(Optional) Unicast received
unicast_trans	(Optional) Unicast transmitted
timeout_discards	(Optional) timeout discards
credit_loss	(Optional) credit loss
link_faliures	(Optional) Link faliures
sync_loss	(Optional) Sync Loss
signal_loss	(Optional) Signal Loss
prm_seq_pro_err	(Optional) primitive sequence protocol errors
inv_trans_err	(Optional) invaid transmission errors
inv_crc	(Optional) Invalid crc
delim_err	(Optional) Delimiter Errors
addr_iden_err	(Optional) Address Identification errors
link_reset_rcvd	(Optional) link reset received
link_reset_trans	(Optional) link reset transmitted
off_seq_err_rcvd	(Optional) Offine sequence error received
off_seq_err_trans	(Optional) Offline sequence Error transmitted
frames_rcvd_short	(Optional) frames received that are shorter than the minimum allowable frame length regardless of the CRC/FCS error
frames_rcvd_long	(Optional) frames received that are longer than the minimum allowable frame length regardless of the CRC/FCS error
txwait	(Optional) TXwait
frames_rcvd_greater	(Optional) frames received with length greater than what was agreed to in FLOGI/PLOGI
frame_rcvd_short_header	(Optional) frames received with length less than the minimum indicated by the frame header
link_reset_resp_rcvd	(Optional) Link reset responses received
link_reset_resp_trans	(Optional) Link reset responses transmitted
non_oper_seq_rcvd	(Optional) Non operational sequence received
non_oper_seq_trans	(Optional) Non operational sequence transmitted
frag_frames_rcvd	(Optional) fragmented frames received
frames_eof_abort	(Optional) frames EOF abort
unknown_class_frames_rcvd	(Optional) unknown class frames received
8b10b_disparity_err	(Optional) 8b10b disparity errors
frames_discard	(Optional) frames discard
ex_link_param_sw_fab	(Optional) external link parameters switch fabric
in_link_ser_req_faliures	(Optional) internal link serial request faliures
b2b_credits_transmit	(Optional) B2B credits transmit
b2b_credits_receive	(Optional) B2B credits receive
eisl_frames	(Optional) EISL frames
framing_err	(Optional) Framing Error
f8_lip_seq_err_rcvd	(Optional) f8 LIP sequence error received
f8_lip_seq_err_issued	(Optional) f8 LIP sequence error issued
non_f8_lip_seq_err_rcvd	(Optional) non f8 LIP sequence error received
non_f8_lip_seq_err_issued	(Optional) non f8 LIP sequence error issued
fec_corrected	(Optional) fec corrected blocks
fec_uncorrected	(Optional) fec uncorrected blocks
TABLE_interface	(Optional) interface
interface	(Optional) interface
fcoe_in_pkts	(Optional) fcoe in pkts
fcoe_in_octets	(Optional) fcoe in octets
fcoe_out_pkts	(Optional) fcoe out pkts
fcoe_out_octets	(Optional) fcoe out octets

Command Mode

/exec

show interface fcoe

show interface <ifeth_fcoe> fcoe [ __readonly__ TABLE_interface <interface> [ <state> ] [ <vfc> ] [ <vfc_bound> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifeth_fcoe	Enter interface type and number in module/slot format
fcoe	Show interface fcoe information
__readonly__	(Optional) Read Only
TABLE_interface	(Optional) show interface
interface	(Optional) Interface index
state	(Optional) State of interface
vfc	(Optional) VFC
vfc_bound	(Optional) Binding information

Command Mode

/exec

show interface fec

Syntax Description


show	Show running system information
interface	Interface
fec	Show fec admin and operation state on physical interface

Command Mode

/exec

show interface flowcontrol

show interface flowcontrol [ module <module> ] [ __readonly__ TABLE_interface <interface> <send_admin> <send_oper> <recv_admin> <recv_oper> <rxpause> <txpause> ]

Syntax Description


show	Show running system information
interface	Show interface status and information
flowcontrol	Show interface flowcontrol information
module	(Optional) Limit display to interfaces on module
module	(Optional) Enter module number
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
send_admin	(Optional) Send flowcontrol admin
send_oper	(Optional) Send flowcontrol oper
recv_admin	(Optional) Receive flowcontrol admin
recv_oper	(Optional) Receive flowcontrol oper
rxpause	(Optional) RxPause
txpause	(Optional) TxPause

Command Mode

/exec

show interface flowcontrol

show interface <ifeth_fl_ctrl> flowcontrol [ __readonly__ TABLE_interface <interface> <send_admin> <send_oper> <recv_admin> <recv_oper> <rxpause> <txpause> ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifeth_fl_ctrl	Enter interface type and number in module/slot format
flowcontrol	Show interface flowcontrol information
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
send_admin	(Optional) Send flowcontrol admin
send_oper	(Optional) Send flowcontrol oper
recv_admin	(Optional) Receive flowcontrol admin
recv_oper	(Optional) Receive flowcontrol oper
rxpause	(Optional) RxPause
txpause	(Optional) TxPause

Command Mode

/exec

show interface hardware-mappings

show interface hardware-mappings [ json ]

Syntax Description


show	Show running system information
interface	Interface
hardware-mappings	Show hardware port number and unit information for interfaces
json	(Optional) display the output in json format

Command Mode

/exec

show interface mac-address

show interface mac-address [ __readonly__ TABLE_interface <interface> <address> <bia_address> ]

Syntax Description


show	Show running system information
interface	Show interface status and information
mac-address	Show interface MAC address
__readonly__	(Optional) Read Only
TABLE_interface	(Optional) show interface
interface	(Optional) Interface index
address	(Optional) MAC Address
bia_address	(Optional) Burn-In MAC Address

Command Mode

/exec

show interface mac-address

show interface <ifid_macaddr> mac-address [ __readonly__ TABLE_interface <interface> <address> <bia_address> ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid_macaddr	Enter interface type and number in module/slot format
mac-address	Show interface MAC address
__readonly__	(Optional) Read Only
TABLE_interface	(Optional) show interface
interface	(Optional) Interface index
address	(Optional) MAC Address
bia_address	(Optional) Burn-In MAC Address

Command Mode

/exec

show interface priority-flow-control

show interface [ <if_list> ] priority-flow-control [ detail ] [ module <module> ] [ __readonly__ [ TABLE_pfc_interface <if_name_str> <admin> <oper> [ <cos-list> ] <rx-stats> <tx-stats> [ <rx_ppp_cos_0> ] [ <rx_ppp_cos_1> ] [ <rx_ppp_cos_2> ] [ <rx_ppp_cos_3> ] [ <rx_ppp_cos_4> ] [ <rx_ppp_cos_5> ] [ <rx_ppp_cos_6> ] [ <rx_ppp_cos_7> ] [ <tx_ppp_cos_0> ] [ <tx_ppp_cos_1> ] [ <tx_ppp_cos_2> ] [ <tx_ppp_cos_3> ] [ <tx_ppp_cos_4> ] [ <tx_ppp_cos_5> ] [ <tx_ppp_cos_6> ] [ <tx_ppp_cos_7> ] ] ]

Syntax Description


show	commands to display
interface	Interface for displaying pfc information
if_list	(Optional) List of interfaces
module	(Optional) Slot/module
module	(Optional) Slot/module number
priority-flow-control	Show interface PFC information
detail	(Optional) Show detailed per priority Tx/Rx PFC statistics
__readonly__	(Optional)
if_name_str	(Optional) interface name
TABLE_pfc_interface	(Optional) PFC information of an interface
admin	(Optional) PFC admin
oper	(Optional) PFC oper
cos-list	(Optional) List of class-of-service values

Command Mode

/exec

show interface private-vlan mapping

show interface [ <if> ] private-vlan mapping [ __readonly__ [ <output-filtered> ] [ { TABLE_interf_mapp <interface-id> [ <secondary-vlan> + ] [ <pvlan-type> ] } ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
if	(Optional) Vlan Interface number
private-vlan	Show interface private vlan information
mapping	Show interface private vlan information
__readonly__	(Optional) Read Only
output-filtered	(Optional) the output is filtered for specified ifs
TABLE_interf_mapp	(Optional) Pvlan interface mapping table
interface-id	(Optional) Interface
secondary-vlan	(Optional) Secondary Vlan
pvlan-type	(Optional) PVLAN Type

Command Mode

/exec

show interface pruning

show interface pruning [ __readonly__ <start> { TABLE_interface_pruning1 <if_index1> <rx_join> } { TABLE_interface_pruning2 <if_index2> <cur_join> } ]

Syntax Description


show	Show running system information
interface	Show interface status and information
pruning	Show interface trunk VTP pruning information
__readonly__	(Optional) Read Only
start	(Optional) Start
TABLE_interface_pruning1	(Optional) Interface pruning information in table format
if_index1	(Optional) Trunk
rx_join	(Optional) Vlans pruned for lack of request by neighbor
TABLE_interface_pruning2	(Optional) Interface pruning information in table format
if_index2	(Optional) Trunk
cur_join	(Optional) Vlan traffic requested of neighbor

Command Mode

/exec

show interface snmp-ifindex

show interface snmp-ifindex [ __readonly__ TABLE_interface <interface> <snmp-ifindex> [ <ifindex-hex> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
snmp-ifindex	Show snmp ifindex list
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
ifindex-hex	(Optional) If Index in Hex
snmp-ifindex	(Optional) If Index in Dec

Command Mode

/exec

show interface status

show interface <ifrange> status [ err-disabled ] [ __readonly__ TABLE_interface <interface> <name> <state> <state_rsn> <state_rsn_desc> <admin_state> ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifrange	Enter tunnel interface number
status	Show interface line status
err-disabled	(Optional) Show interface error disabled state
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
name	(Optional) Name
state	(Optional) Interface state
state_rsn	(Optional) Interface state reason
state_rsn_desc	(Optional) Interface state reason detailed
admin_state	(Optional) admin state

Command Mode

/exec

show interface status

show interface <ifid> status [ __readonly__ <start> <if_index> <admin-state> <line-proto> ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid	VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19
status	Interface status
__readonly__	(Optional) Read Only
start	(Optional) Start
if_index	(Optional) Interface
admin-state	(Optional)
line-proto	(Optional)

Command Mode

/exec

show interface status

show interface status [ down | inactive | module <module> | up | auto-column ] [ __readonly__ TABLE_interface <interface> [ <name> ] [ <state> ] [ <state_san> ] [ <state_rsn> ] [ <vlan> ] [ <duplex> ] [ <speed> ] [ <type> ] [ <admin_mode> ] [ <vsan> ] [ <bind_info> ] [ <bind_type> ] [ <bind_mac> ] [ <oper_speed> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
status	Show interface line status
down	(Optional) Show interface down state
inactive	(Optional) Show interface inactive state
auto-column	(Optional) Show interface status auto-column adjusted
module	(Optional) Limit display to interfaces on module
module	(Optional) Enter module number
up	(Optional) Show interface up state
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
name	(Optional) Name
state	(Optional) Interface state
state_san	(Optional) SAN Port State
vlan	(Optional) Vlan
vsan	(Optional) Vsan
duplex	(Optional) Duplex
speed	(Optional) Speed
type	(Optional) Type
state_rsn	(Optional) Port State Reason
bind_info	(Optional) bind interface
bind_type	(Optional) bind type
bind_mac	(Optional) bind mac
oper_speed	(Optional) speed
admin_mode	(Optional) admin mode

Command Mode

/exec

show interface status

show interface <ifid_status> status [ __readonly__ TABLE_interface <interface> [ <name> ] [ <state> ] [ <vlan> ] [ <duplex> ] [ <speed> ] [ <type> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid_status	Enter interface type and number in module/slot format
status	Show interface line status
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
name	(Optional) Name
state	(Optional) Interface state
vlan	(Optional) Vlan
duplex	(Optional) Duplex
speed	(Optional) Speed
type	(Optional) Type

Command Mode

/exec

show interface status

show interface <ifeth_status> status [ __readonly__ TABLE_interface <interface> [ <name> ] [ <state> ] [ <vlan> ] <duplex> <speed> [ <type> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifeth_status	Enter interface type and number in module/slot format
status	Show interface line status
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
name	(Optional) Name
state	(Optional) Interface state
vlan	(Optional) Vlan
duplex	(Optional) Duplex
speed	(Optional) Speed
type	(Optional) Type

Command Mode

/exec

show interface status

show interface <iftun_status> status [ err-disabled ] [ __readonly__ TABLE_interface <interface> <name> <state> <state_rsn> <state_rsn_desc> ]

Syntax Description


show	Show running system information
interface	Show interface status and information
iftun_status	Enter tunnel interface number
status	Show interface line status
err-disabled	(Optional) Show interface error disabled state
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
name	(Optional) Name
state	(Optional) Interface state
state_rsn	(Optional) Interface state reason
state_rsn_desc	(Optional) Interface state reason detailed

Command Mode

/exec

show interface status

show interface <ifrange> status [ err-disabled ] [ __readonly__ TABLE_interface <interface> <name> <state> <state_rsn> <state_rsn_desc> ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifrange	Enter tunnel interface number
status	Show interface line status
err-disabled	(Optional) Show interface error disabled state
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
name	(Optional) Name
state	(Optional) Interface state
state_rsn	(Optional) Interface state reason
state_rsn_desc	(Optional) Interface state reason detailed

Command Mode

/exec

show interface status err-disabled

show interface status err-disabled [ __readonly__ TABLE_interface <interface> [ <name> ] <state> [ <state_rsn> ] [ <state_rsn_desc> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
status	Show interface line status
err-disabled	Show interface error disabled state
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
name	(Optional) Name
state	(Optional) Interface state
state_rsn	(Optional) Interface state reason
state_rsn_desc	(Optional) Interface state reason detailed

Command Mode

/exec

show interface status err-disabled

show interface <ifeth_errdis> status err-disabled [ __readonly__ TABLE_interface <interface> [ <name> ] <state> [ <state_rsn> ] [ <state_rsn_desc> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
status	Show interface line status
ifeth_errdis	Enter interface type and number in module/slot format
err-disabled	Show interface error disabled state
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
name	(Optional) Name
state	(Optional) Interface state
state_rsn	(Optional) Interface state reason
state_rsn_desc	(Optional) Interface state reason detailed

Command Mode

/exec

show interface status err-vlans

show interface status err-vlans [ __readonly__ TABLE_interface <interface> [ <name> ] { TABLE_vlan <err_vlan> <err_vlan_status> <err_vlan_syserr> } ]

Syntax Description


show	Show running system information
interface	Show interface status and information
status	Show interface line status
err-vlans	Show errored vlans
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
name	(Optional) Name
TABLE_vlan	(Optional) show vlan
err_vlan	(Optional) Errored vlan
err_vlan_status	(Optional) Errored vlan status
err_vlan_syserr	(Optional) Errored vlan syserr name

Command Mode

/exec

show interface status err-vlans

show interface <ifeth_errvlans> status err-vlans [ __readonly__ TABLE_interface <interface> [ <name> ] [ { TABLE_vlan [ <err_vlan> ] [ <err_vlan_status> ] [ <err_vlan_syserr> ] } ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifeth_errvlans	Enter interface type and number in module/slot format
status	Show interface line status
err-vlans	Show errored vlans
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
name	(Optional) Name
TABLE_vlan	(Optional) show vlan
err_vlan	(Optional) Errored vlan
err_vlan_status	(Optional) Errored vlan status
err_vlan_syserr	(Optional) Errored vlan syserr name

Command Mode

/exec

show interface switchport

show interface <ifeth_swtch> switchport [ __readonly__ TABLE_interface <interface> <switchport> [ <switchport_monitor> ] [ <switchport_isolated> ] [ <switchport_block_multicast> ] [ <switchport_block_unicast> ] [ <oper_mode> ] [ <access_vlan> ] [ <access_vlan_name> ] [ <native_vlan> ] [ <native_vlan_name> ] [ <trunk_vlans> ] [ <fabricpath_topologies> ] [ <pruning_vlans> ] [ <voice_vlan> ] [ <voice_vlan_name> ] [ <extended_trust> ] [ <extended_trust_name> ] [ <admin_pvlan_pri_assoc> ] [ <admin_pvlan_sec_assoc> ] [ <admin_pvlan_pri_mapping> ] [ <admin_pvlan_sec_mapping> ] [ <admin_pvlan_trunk_native> ] [ <admin_pvlan_trunk_encap> ] [ <admin_pvlan_trunk_normal> ] [ <admin_pvlan_trunk_private> ] [ <oper_pvlan> ] [ <autostate_mode> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifeth_swtch	Enter interface type and number in module/slot format
switchport	Show interface switchport information
__readonly__	(Optional) Read Only
TABLE_interface	(Optional) show interface
interface	(Optional) Interface index
switchport	(Optional) Switchport enabled
switchport_monitor	(Optional) Switchport monitor enabled
switchport_isolated	(Optional) Switchport isolated enabled
switchport_block_multicast	(Optional) Switchport monitor enabled
switchport_block_unicast	(Optional) Switchport monitor enabled
oper_mode	(Optional) Operational mode
access_vlan	(Optional) Access mode VLAN
access_vlan_name	(Optional) Access mode VLAN name
native_vlan	(Optional) Trunking native mode VLAN
native_vlan_name	(Optional) Trunking native mode VLAN name
trunk_vlans	(Optional) Trunking VLANs Allowed
fabricpath_topologies	(Optional) FabricPath Topologies Allowed
pruning_vlans	(Optional) Pruning eligible VLANs
voice_vlan	(Optional) Voice VLAN
voice_vlan_name	(Optional) Voice VLAN name
extended_trust	(Optional) Extended Trust
extended_trust_name	(Optional) Extended Trust name
admin_pvlan_pri_assoc	(Optional) Administrative private-vlan primary host-association
admin_pvlan_sec_assoc	(Optional) Administrative private-vlan secondary host-association
admin_pvlan_pri_mapping	(Optional) Administrative private-vlan primary mapping
admin_pvlan_sec_mapping	(Optional) Administrative private-vlan secondary mapping
admin_pvlan_trunk_native	(Optional) Administrative private-vlan trunk native VLAN
admin_pvlan_trunk_encap	(Optional) Administrative private-vlan trunk encapsulation
admin_pvlan_trunk_normal	(Optional) Administrative private-vlan trunk normal VLANs
admin_pvlan_trunk_private	(Optional) Administrative private-vlan trunk private VLANs
oper_pvlan	(Optional) Operational private-vlan
autostate_mode	(Optional) SVI Autostate Exclude Info

Command Mode

/exec

show interface switchport

show interface switchport [ __readonly__ TABLE_interface <interface> <switchport> [ <switchport_monitor> ] [ <switchport_isolated> ] [ <switchport_block_multicast> ] [ <switchport_block_unicast> ] [ <mac_learning> ] [ <oper_mode> ] [ <access_vlan> ] [ <access_vlan_name> ] [ <native_vlan> ] [ <native_vlan_name> ] [ <trunk_vlans> ] [ <fabricpath_topologies> ] [ <pruning_vlans> ] [ <voice_vlan> ] [ <voice_vlan_name> ] [ <extended_trust> ] [ <extended_trust_name> ] [ <admin_pvlan_pri_assoc> ] [ <admin_pvlan_sec_assoc> ] [ <admin_pvlan_pri_mapping> ] [ <admin_pvlan_sec_mapping> ] [ <admin_pvlan_trunk_native> ] [ <admin_pvlan_trunk_encap> ] [ <admin_pvlan_trunk_normal> ] [ <admin_pvlan_trunk_private> ] [ <oper_pvlan> ] [ <autostate_mode> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
switchport	Show interface switchport information
__readonly__	(Optional) Read Only
TABLE_interface	(Optional) show interface
interface	(Optional) Interface index
switchport	(Optional) Switchport enabled
switchport_monitor	(Optional) Switchport monitor enabled
switchport_isolated	(Optional) Switchport isolated enabled
mac_learning	(Optional) Mac learning enabled/disabled
switchport_block_multicast	(Optional) Switchport monitor enabled
switchport_block_unicast	(Optional) Switchport monitor enabled
oper_mode	(Optional) Operational mode
access_vlan	(Optional) Access mode VLAN
access_vlan_name	(Optional) Access mode VLAN name
native_vlan	(Optional) Trunking native mode VLAN
native_vlan_name	(Optional) Trunking native mode VLAN name
trunk_vlans	(Optional) Trunking VLANs Allowed
fabricpath_topologies	(Optional) FabricPath Topologies Allowed
pruning_vlans	(Optional) Pruning eligible VLANs
voice_vlan	(Optional) Voice VLAN
voice_vlan_name	(Optional) Voice VLAN name
extended_trust	(Optional) Extended Trust
extended_trust_name	(Optional) Extended Trust name
admin_pvlan_pri_assoc	(Optional) Administrative private-vlan primary host-association
admin_pvlan_sec_assoc	(Optional) Administrative private-vlan secondary host-association
admin_pvlan_pri_mapping	(Optional) Administrative private-vlan primary mapping
admin_pvlan_sec_mapping	(Optional) Administrative private-vlan secondary mapping
admin_pvlan_trunk_native	(Optional) Administrative private-vlan trunk native VLAN
admin_pvlan_trunk_encap	(Optional) Administrative private-vlan trunk encapsulation
admin_pvlan_trunk_normal	(Optional) Administrative private-vlan trunk normal VLANs
admin_pvlan_trunk_private	(Optional) Administrative private-vlan trunk private VLANs
oper_pvlan	(Optional) Operational private-vlan
autostate_mode	(Optional) SVI Autostate Exclude Info

Command Mode

/exec

show interface switchport backup

show interface switchport backup [ detail ] [ __readonly__ { TABLE_pair <ai_name> <bi_name> <ai_state> <bi_state> <ai_prefer> <bi_prefer> <preempt_mode> <delay_value> <delay_default> <delay_scheduled> <mcast_fast> <ai_bw> <ai_bw_name> <bi_bw> <bi_bw_name> <mmu_primary> } ]

Syntax Description


show	Show running system information
interface	Show interface status and information
switchport	Show interface switchport information
backup	Show interface backup
detail	(Optional) Backup interface info in detail
__readonly__	(Optional) Read Only
TABLE_pair	(Optional) Show interface backup
ai_name	(Optional) Active Interface name
bi_name	(Optional) Backup Interface name
ai_state	(Optional) Active Interface state
bi_state	(Optional) Backup Interface state
ai_prefer	(Optional) Active Interface prefer VLANs
bi_prefer	(Optional) Backup Interface prefer VLANs
preempt_mode	(Optional) Preempt mode
delay_value	(Optional) Preempt delay
delay_default	(Optional) Preempt delay value is default
delay_scheduled	(Optional) Preemption has been scheduled
mcast_fast	(Optional) Multicast Fast-Convergence
ai_bw	(Optional) Active Interface bandwidth
ai_bw_name	(Optional) Active Interface name for bandwidth
bi_bw	(Optional) Backup Interface bandwidth
bi_bw_name	(Optional) Backup Interface name for bandwidth
mmu_primary	(Optional) MAC Move Update primary VLAN

Command Mode

/exec

show interface transceiver

show interface transceiver [ calibrations | details ] [ __readonly__ TABLE_interface <interface> [ <sfp> ] [ <type> ] [ <name> ] [ <partnum> ] [ <rev> ] [ <serialnum> ] [ <nom_bitrate> ] [ <len_9> ] [ <len_50> ] [ <len_625> ] [ <len_cu> ] [ <len_50_OM3> ] [ <txcvr_type> ] [ <connector_type> ] [ <bit_encoding> ] [ <protocol_type> ] [ <10gbe_code> ] [ <fiber_type_byte0> ] [ <fiber_type_byte1> ] [ <tx_type> ] [ <tx_len> ] [ <tx_medium> ] [ <tx_speeds> ] [ <tx_range> ] [ <cable_type> ] [ <ciscoid> ] [ <ciscoid_1> ] [ <cisco_part_number> ] [ <cisco_product_id> ] [ <cisco_vendor_id> ] [ <cisco_ext_id> ] [ <info_not_available> ] [ <temp_slope> ] [ <temp_offset> ] [ <volt_slope> ] [ <volt_offset> ] [ <curr_slope> ] [ <curr_offset> ] [ <tx_pwr_slope> ] [ <tx_pwr_offset> ] [ <rx_pwr_4> ] [ <rx_pwr_3> ] [ <rx_pwr_2> ] [ <rx_pwr_1> ] [ <rx_pwr_0> ] [ TABLE_lane [ <lane_number> ] [ <temperature> ] [ <temp_flag> ] [ <temp_alrm_hi> ] [ <temp_alrm_lo> ] [ <temp_warn_hi> ] [ <temp_warn_lo> ] [ <voltage> ] [ <volt_flag> ] [ <volt_alrm_hi> ] [ <volt_alrm_lo> ] [ <volt_warn_hi> ] [ <volt_warn_lo> ] [ <current> ] [ <current_flag> ] [ <current_alrm_hi> ] [ <current_alrm_lo> ] [ <current_warn_hi> ] [ <current_warn_lo> ] [ <tx_pwr> ] [ <tx_pwr_flag> ] [ <tx_pwr_alrm_hi> ] [ <tx_pwr_alrm_lo> ] [ <tx_pwr_warn_hi> ] [ <tx_pwr_warn_lo> ] [ <rx_pwr> ] [ <rx_pwr_flag> ] [ <rx_pwr_alrm_hi> ] [ <rx_pwr_alrm_lo> ] [ <rx_pwr_warn_hi> ] [ <rx_pwr_warn_lo> ] [ <xmit_faults> ] [ <snr> ] [ <snr_flag> ] [ <snr_alrm_hi> ] [ <snr_alrm_lo> ] [ <snr_warn_hi> ] [ <snr_warn_lo> ] [ <isi> ] [ <isi_flag> ] [ <isi_alrm_hi> ] [ <isi_alrm_lo> ] [ <isi_warn_hi> ] [ <isi_warn_lo> ] [ <pam> ] [ <pam_flag> ] [ <pam_alrm_hi> ] [ <pam_alrm_lo> ] [ <pam_warn_hi> ] [ <pam_warn_lo> ] [ <pre_fec_ber> ] [ <pre_fec_ber_flag> ] [ <pre_fec_ber_alrm_hi> ] [ <pre_fec_ber_alrm_lo> ] [ <pre_fec_ber_warn_hi> ] [ <pre_fec_ber_warn_lo> ] [ <uncorrect_ber> ] [ <uncorrect_ber_flag> ] [ <uncorrect_ber_alrm_hi> ] [ <uncorrect_ber_alrm_lo> ] [ <uncorrect_ber_warn_hi> ] [ <uncorrect_ber_warn_lo> ] [ <tec_current> ] [ <tec_current_flag> ] [ <tec_current_alrm_hi> ] [ <tec_current_alrm_lo> ] [ <tec_current_warn_hi> ] [ <tec_current_warn_lo> ] [ <laser_freq> ] [ <laser_freq_flag> ] [ <laser_freq_alrm_hi> ] [ <laser_freq_alrm_lo> ] [ <laser_freq_warn_hi> ] [ <laser_freq_warn_lo> ] [ <laser_temp> ] [ <laser_temp_flag> ] [ <laser_temp_alrm_hi> ] [ <laser_temp_alrm_lo> ] [ <laser_temp_warn_hi> ] [ <laser_temp_warn_lo> ] [ <pre_fec_ber_acc> ] [ <pre_fec_ber_acc_flag> ] [ <pre_fec_ber_acc_alrm_hi> ] [ <pre_fec_ber_acc_alrm_lo> ] [ <pre_fec_ber_acc_warn_hi> ] [ <pre_fec_ber_acc_warn_lo> ] [ <pre_fec_ber_min> ] [ <pre_fec_ber_min_flag> ] [ <pre_fec_ber_min_alrm_hi> ] [ <pre_fec_ber_min_alrm_lo> ] [ <pre_fec_ber_min_warn_hi> ] [ <pre_fec_ber_min_warn_lo> ] [ <pre_fec_ber_max> ] [ <pre_fec_ber_max_flag> ] [ <pre_fec_ber_max_alrm_hi> ] [ <pre_fec_ber_max_alrm_lo> ] [ <pre_fec_ber_max_warn_hi> ] [ <pre_fec_ber_max_warn_lo> ] [ <pre_fec_ber_cur> ] [ <pre_fec_ber_cur_flag> ] [ <pre_fec_ber_cur_alrm_hi> ] [ <pre_fec_ber_cur_alrm_lo> ] [ <pre_fec_ber_cur_warn_hi> ] [ <pre_fec_ber_cur_warn_lo> ] [ <uncorrect_ber_acc> ] [ <uncorrect_ber_acc_flag> ] [ <uncorrect_ber_acc_alrm_hi> ] [ <uncorrect_ber_acc_alrm_lo> ] [ <uncorrect_ber_acc_warn_hi> ] [ <uncorrect_ber_acc_warn_lo> ] [ <uncorrect_ber_min> ] [ <uncorrect_ber_min_flag> ] [ <uncorrect_ber_min_alrm_hi> ] [ <uncorrect_ber_min_alrm_lo> ] [ <uncorrect_ber_min_warn_hi> ] [ <uncorrect_ber_min_warn_lo> ] [ <uncorrect_ber_max> ] [ <uncorrect_ber_max_flag> ] [ <uncorrect_ber_max_alrm_hi> ] [ <uncorrect_ber_max_alrm_lo> ] [ <uncorrect_ber_max_warn_hi> ] [ <uncorrect_ber_max_warn_lo> ] [ <uncorrect_ber_cur> ] [ <uncorrect_ber_cur_flag> ] [ <uncorrect_ber_cur_alrm_hi> ] [ <uncorrect_ber_cur_alrm_lo> ] [ <uncorrect_ber_cur_warn_hi> ] [ <uncorrect_ber_cur_warn_lo> ] ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
transceiver	Show interface transceiver information
calibrations	(Optional) Show interface transceiver calibration information
details	(Optional) Show interface transceiver detail information
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
sfp	(Optional) sfp
type	(Optional) type
name	(Optional) Name
partnum	(Optional) part number
rev	(Optional) revision
serialnum	(Optional) serial number
nom_bitrate	(Optional) Nominal bit rate in MBits/sec
len_9	(Optional) Link length supported for 9/125um fiber
len_50	(Optional) Link length supported for 50/125um fiber
len_625	(Optional) Link length supported for 62.5/125um fiber
len_cu	(Optional) Link length supported for copper
len_50_OM3	(Optional) Link length supported for 50/125um fiber in m
txcvr_type	(Optional)
connector_type	(Optional)
bit_encoding	(Optional)
protocol_type	(Optional)
10gbe_code	(Optional)
fiber_type_byte0	(Optional)
fiber_type_byte1	(Optional)
tx_type	(Optional) FC Transmitter type
tx_len	(Optional) FC Transmitter length
tx_medium	(Optional) FC Transmitter medium
tx_speeds	(Optional) Transmission speeds
tx_range	(Optional) Transmission range
cable_type	(Optional)
ciscoid	(Optional) Cisco extended id
ciscoid_1	(Optional) Cisco extended id number
cisco_part_number	(Optional) Cisco part number
cisco_product_id	(Optional) Cisco product identifier
cisco_vendor_id	(Optional) Cisco vendor identifier
cisco_ext_id	(Optional) Cisco extended ID
info_not_available	(Optional) No info available for this transceiver
temp_slope	(Optional) Temperature slope
temp_offset	(Optional) Temperature offset
volt_slope	(Optional) Voltage slope
volt_offset	(Optional) Voltage offset
curr_slope	(Optional) Current slope
curr_offset	(Optional) Current offset
tx_pwr_slope	(Optional) Tx power slope
tx_pwr_offset	(Optional) Tx power offset
rx_pwr_4	(Optional) Rx power 4
rx_pwr_3	(Optional) Rx power 3
rx_pwr_2	(Optional) Rx power 2
rx_pwr_1	(Optional) Rx power 1
rx_pwr_0	(Optional) Rx power 0
TABLE_lane	(Optional) show lane
lane_number	(Optional) Lane number
temperature	(Optional) Temperature
temp_flag	(Optional) Temperature Flag
temp_alrm_hi	(Optional) Temperature Alarm High
temp_alrm_lo	(Optional) Temperature Alarm Low
temp_warn_hi	(Optional) Temperature Warning High
temp_warn_lo	(Optional) Temperature Warning Low
voltage	(Optional) Voltage
volt_flag	(Optional) Voltage Flag
volt_alrm_hi	(Optional) Voltage Alarm High
volt_alrm_lo	(Optional) Voltage Alarm Low
volt_warn_hi	(Optional) Voltage Warning High
volt_warn_lo	(Optional) Voltage Warning Low
current	(Optional) Current
current_flag	(Optional) Current Flag
current_alrm_hi	(Optional) Current Alarm High
current_alrm_lo	(Optional) Current Alarm Low
current_warn_hi	(Optional) Current Warning High
current_warn_lo	(Optional) Current Warning Low
tx_pwr	(Optional) Tx Power
tx_pwr_flag	(Optional) Tx Power Flag
tx_pwr_alrm_hi	(Optional) Tx Power Alarm High
tx_pwr_alrm_lo	(Optional) Tx Power Alarm Low
tx_pwr_warn_hi	(Optional) Tx Power Warning High
tx_pwr_warn_lo	(Optional) Tx Power Warning Low
rx_pwr	(Optional) Rx Power
rx_pwr_flag	(Optional) Rx Power Flag
rx_pwr_alrm_hi	(Optional) Rx Power Alarm High
rx_pwr_alrm_lo	(Optional) Rx Power Alarm Low
rx_pwr_warn_hi	(Optional) Rx Power Warning High
rx_pwr_warn_lo	(Optional) Rx Power Warning Low
xmit_faults	(Optional) Transmit Fault Count
snr	(Optional) RX Signal-to-Noise Ratio (SNR)
snr_flag	(Optional) SNR Flag
snr_alrm_hi	(Optional) SNR Alarm High
snr_alrm_lo	(Optional) SNR Alarm Low
snr_warn_hi	(Optional) SNR Warning High
snr_warn_lo	(Optional) SNR Warning Low
isi	(Optional) Residual-Dispersion(ISI)
isi_flag	(Optional) ISI Flag
isi_alrm_hi	(Optional) ISI alarm high
isi_alrm_lo	(Optional) ISI alarm low
isi_warn_hi	(Optional) ISI warning high
isi_warn_lo	(Optional) ISI warning low
pam	(Optional) PAM Transition
pam_flag	(Optional) PAM Flag
pam_alrm_hi	(Optional) PAM alarm high
pam_alrm_lo	(Optional) PAM alarm low
pam_warn_hi	(Optional) PAM warning high
pam_warn_lo	(Optional) PAM warning low
pre_fec_ber	(Optional) Pre-FEC BER
pre_fec_ber_flag	(Optional) Pre-FEC BER flag
pre_fec_ber_alrm_hi	(Optional) Pre-FEC BER alarm high
pre_fec_ber_alrm_lo	(Optional) Pre-FEC BER alarm low
pre_fec_ber_warn_hi	(Optional) Pre-FEC BER warning high
pre_fec_ber_warn_lo	(Optional) Pre-FEC BER warning low
uncorrect_ber	(Optional) Uncorrected BER
uncorrect_ber_flag	(Optional) Uncorrected BER flag
uncorrect_ber_alrm_hi	(Optional) Uncorrected BER alarm high
uncorrect_ber_alrm_lo	(Optional) Uncorrected BER alarm low
uncorrect_ber_warn_hi	(Optional) Uncorrected BER warning high
uncorrect_ber_warn_lo	(Optional) Uncorrected BER warning low
tec_current	(Optional) TEC Current
tec_current_flag	(Optional) TEC Current flag
tec_current_alrm_hi	(Optional) TEC Current Alarm High
tec_current_alrm_lo	(Optional) TEC Current Alarm Low
tec_current_warn_hi	(Optional) TEC Current Warning High
tec_current_warn_lo	(Optional) TEC Current Warning Low
laser_freq	(Optional) Laser Frequency
laser_freq_flag	(Optional) Laser Frequency flag
laser_freq_alrm_hi	(Optional) Laser Frequency Alarm High
laser_freq_alrm_lo	(Optional) Laser Frequency Alarm Low
laser_freq_warn_hi	(Optional) Laser Frequency Warning High
laser_freq_warn_lo	(Optional) Laser Frequency Warning Low
laser_temp	(Optional) Laser Temperature
laser_temp_flag	(Optional) Laser Temperature flag
laser_temp_alrm_hi	(Optional) Laser Temperature Alarm High
laser_temp_alrm_lo	(Optional) Laser Temperature Alarm Low
laser_temp_warn_hi	(Optional) Laser Temperature Warning High
laser_temp_warn_lo	(Optional) Laser Temperature Warning Low
pre_fec_ber_acc	(Optional) Pre-FEC BER Acc
pre_fec_ber_acc_flag	(Optional) Pre-FEC BER Acc flag
pre_fec_ber_acc_alrm_hi	(Optional) Pre-FEC BER Acc alarm high
pre_fec_ber_acc_alrm_lo	(Optional) Pre-FEC BER Acc alarm low
pre_fec_ber_acc_warn_hi	(Optional) Pre-FEC BER Acc warning high
pre_fec_ber_acc_warn_lo	(Optional) Pre-FEC BER Acc warning low
pre_fec_ber_min	(Optional) Pre-FEC BER Min
pre_fec_ber_min_flag	(Optional) Pre-FEC BER Min flag
pre_fec_ber_min_alrm_hi	(Optional) Pre-FEC BER Min alarm high
pre_fec_ber_min_alrm_lo	(Optional) Pre-FEC BER Min alarm low
pre_fec_ber_min_warn_hi	(Optional) Pre-FEC BER Min warning high
pre_fec_ber_min_warn_lo	(Optional) Pre-FEC BER Min warning low
pre_fec_ber_max	(Optional) Pre-FEC BER Max
pre_fec_ber_max_flag	(Optional) Pre-FEC BER Max flag
pre_fec_ber_max_alrm_hi	(Optional) Pre-FEC BER Max alarm high
pre_fec_ber_max_alrm_lo	(Optional) Pre-FEC BER Max alarm low
pre_fec_ber_max_warn_hi	(Optional) Pre-FEC BER Max warning high
pre_fec_ber_max_warn_lo	(Optional) Pre-FEC BER Max warning low
pre_fec_ber_cur	(Optional) Pre-FEC BER Cur
pre_fec_ber_cur_flag	(Optional) Pre-FEC BER Cur flag
pre_fec_ber_cur_alrm_hi	(Optional) Pre-FEC BER Cur alarm high
pre_fec_ber_cur_alrm_lo	(Optional) Pre-FEC BER Cur alarm low
pre_fec_ber_cur_warn_hi	(Optional) Pre-FEC BER Cur warning high
pre_fec_ber_cur_warn_lo	(Optional) Pre-FEC BER Cur warning low
uncorrect_ber_acc	(Optional) Uncorrected BER Acc
uncorrect_ber_acc_flag	(Optional) Uncorrected BER Acc flag
uncorrect_ber_acc_alrm_hi	(Optional) Uncorrected BER Acc alarm high
uncorrect_ber_acc_alrm_lo	(Optional) Uncorrected BER Acc alarm low
uncorrect_ber_acc_warn_hi	(Optional) Uncorrected BER Acc warning high
uncorrect_ber_acc_warn_lo	(Optional) Uncorrected BER Acc warning low
uncorrect_ber_min	(Optional) Uncorrected BER Min
uncorrect_ber_min_flag	(Optional) Uncorrected BER Min flag
uncorrect_ber_min_alrm_hi	(Optional) Uncorrected BER Min alarm high
uncorrect_ber_min_alrm_lo	(Optional) Uncorrected BER Min alarm low
uncorrect_ber_min_warn_hi	(Optional) Uncorrected BER Min warning high
uncorrect_ber_min_warn_lo	(Optional) Uncorrected BER Min warning low
uncorrect_ber_max	(Optional) Uncorrected BER Max
uncorrect_ber_max_flag	(Optional) Uncorrected BER Max flag
uncorrect_ber_max_alrm_hi	(Optional) Uncorrected BER Max alarm high
uncorrect_ber_max_alrm_lo	(Optional) Uncorrected BER Max alarm low
uncorrect_ber_max_warn_hi	(Optional) Uncorrected BER Max warning high
uncorrect_ber_max_warn_lo	(Optional) Uncorrected BER Max warning low
uncorrect_ber_cur	(Optional) Uncorrected BER Cur
uncorrect_ber_cur_flag	(Optional) Uncorrected BER Cur flag
uncorrect_ber_cur_alrm_hi	(Optional) Uncorrected BER Cur alarm high
uncorrect_ber_cur_alrm_lo	(Optional) Uncorrected BER Cur alarm low
uncorrect_ber_cur_warn_hi	(Optional) Uncorrected BER Cur warning high
uncorrect_ber_cur_warn_lo	(Optional) Uncorrected BER Cur warning low

Command Mode

/exec

show interface transceiver

show interface <ifid_trns_fc> transceiver [ calibrations | details ] [ __readonly__ TABLE_interface <interface_fc> [ <sfp_fc> ] [ <type_fc> ] [ <name_fc> ] [ <partnum_fc> ] [ <rev_fc> ] [ <serialnum_fc> ] [ <cisco_partnum_fc> ] [ <cisco_pid_fc> ] [ <tx_type_fc> ] [ <tx_len_fc> ] [ <tx_medium_fc> ] [ <tx_speeds_fc> ] [ <nom_bitrate_fc> ] [ <len_9_fc> ] [ <len_50_fc> ] [ <len_625_fc> ] [ <len_50_OM3_fc> ] [ <cisco_ext_id_fc> ] [ <txcvr_type_fc> ] [ <connector_type_fc> ] [ <bit_encoding_fc> ] [ <protocol_type_fc> ] [ <10gbe_code_fc> ] [ <fiber_type_byte0_fc> ] [ <fiber_type_byte1_fc> ] [ <tx_range_fc> ] [ <temp_slope_fc> ] [ <temp_offset_fc> ] [ <volt_slope_fc> ] [ <volt_offset_fc> ] [ <curr_slope_fc> ] [ <curr_offset_fc> ] [ <tx_pwr_slope_fc> ] [ <tx_pwr_offset_fc> ] [ <rx_pwr_4_fc> ] [ <rx_pwr_3_fc> ] [ <rx_pwr_2_fc> ] [ <rx_pwr_1_fc> ] [ <rx_pwr_0_fc> ] [ <temperature_fc> ] [ <temp_flag_fc> ] [ <temp_alrm_hi_fc> ] [ <temp_alrm_lo_fc> ] [ <temp_warn_hi_fc> ] [ <temp_warn_lo_fc> ] [ <voltage_fc> ] [ <volt_flag_fc> ] [ <volt_alrm_hi_fc> ] [ <volt_alrm_lo_fc> ] [ <volt_warn_hi_fc> ] [ <volt_warn_lo_fc> ] [ <current_fc> ] [ <current_flag_fc> ] [ <current_alrm_hi_fc> ] [ <current_alrm_lo_fc> ] [ <current_warn_hi_fc> ] [ <current_warn_lo_fc> ] [ <tx_pwr_fc> ] [ <tx_pwr_flag_fc> ] [ <tx_pwr_alrm_hi_fc> ] [ <tx_pwr_alrm_lo_fc> ] [ <tx_pwr_warn_hi_fc> ] [ <tx_pwr_warn_lo_fc> ] [ <rx_pwr_fc> ] [ <rx_pwr_flag_fc> ] [ <rx_pwr_alrm_hi_fc> ] [ <rx_pwr_alrm_lo_fc> ] [ <rx_pwr_warn_hi_fc> ] [ <rx_pwr_warn_lo_fc> ] [ <xmit_faults_fc> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid_trns_fc	Enter interface type and number in module/slot format
transceiver	Show interface transceiver information
calibrations	(Optional) Show interface transceiver calibration information
details	(Optional) Show interface transceiver detail information
__readonly__	(Optional) Read Only
interface_fc	(Optional) Interface index
TABLE_interface	(Optional) show interface
sfp_fc	(Optional) sfp
type_fc	(Optional) type
name_fc	(Optional) Name
partnum_fc	(Optional) part number
rev_fc	(Optional) revision
serialnum_fc	(Optional) serial number
cisco_partnum_fc	(Optional) Cisco part number
cisco_pid_fc	(Optional) Cisco PID
tx_type_fc	(Optional) FC Transmitter type
tx_len_fc	(Optional) FC Transmitter length
tx_medium_fc	(Optional) FC Transmitter medium
tx_speeds_fc	(Optional) Transmission speeds
nom_bitrate_fc	(Optional) Nominal bit rate in MBits/sec
len_9_fc	(Optional) Link length supported for 9/125um fiber
len_50_fc	(Optional) Link length supported for 50/125um fiber
len_625_fc	(Optional) Link length supported for 62.5/125um fiber
len_50_OM3_fc	(Optional) Link length supported for 50/125um fiber in m
cisco_ext_id_fc	(Optional) Cisco extended ID
txcvr_type_fc	(Optional) Transceiver type
connector_type_fc	(Optional) Connector type
bit_encoding_fc	(Optional) Bit encoding
protocol_type_fc	(Optional) Protocol type
10gbe_code_fc	(Optional) 10GbE code byte
fiber_type_byte0_fc	(Optional) Fiber Type Byte 0
fiber_type_byte1_fc	(Optional) Fiber Type Byte 1
tx_range_fc	(Optional) Transmission Range
temp_slope_fc	(Optional) Temperature slope
temp_offset_fc	(Optional) Temperature offset
volt_slope_fc	(Optional) Voltage slope
volt_offset_fc	(Optional) Voltage offset
curr_slope_fc	(Optional) Current slope
curr_offset_fc	(Optional) Current offset
tx_pwr_slope_fc	(Optional) Tx power slope
tx_pwr_offset_fc	(Optional) Tx power offset
rx_pwr_4_fc	(Optional) Rx power 4
rx_pwr_3_fc	(Optional) Rx power 3
rx_pwr_2_fc	(Optional) Rx power 2
rx_pwr_1_fc	(Optional) Rx power 1
rx_pwr_0_fc	(Optional) Rx power 0
temperature_fc	(Optional) Temperature
temp_flag_fc	(Optional) Temperature Flag
temp_alrm_hi_fc	(Optional) Temperature Alarm High
temp_alrm_lo_fc	(Optional) Temperature Alarm Low
temp_warn_hi_fc	(Optional) Temperature Warning High
temp_warn_lo_fc	(Optional) Temperature Warning Low
voltage_fc	(Optional) Voltage
volt_flag_fc	(Optional) Voltage Flag
volt_alrm_hi_fc	(Optional) Voltage Alarm High
volt_alrm_lo_fc	(Optional) Voltage Alarm Low
volt_warn_hi_fc	(Optional) Voltage Warning High
volt_warn_lo_fc	(Optional) Voltage Warning Low
current_fc	(Optional) Current
current_flag_fc	(Optional) Current Flag
current_alrm_hi_fc	(Optional) Current Alarm High
current_alrm_lo_fc	(Optional) Current Alarm Low
current_warn_hi_fc	(Optional) Current Warning High
current_warn_lo_fc	(Optional) Current Warning Low
tx_pwr_fc	(Optional) Tx Power
tx_pwr_flag_fc	(Optional) Tx Power Flag
tx_pwr_alrm_hi_fc	(Optional) Tx Power Alarm High
tx_pwr_alrm_lo_fc	(Optional) Tx Power Alarm Low
tx_pwr_warn_hi_fc	(Optional) Tx Power Warning High
tx_pwr_warn_lo_fc	(Optional) Tx Power Warning Low
rx_pwr_fc	(Optional) Rx Power
rx_pwr_flag_fc	(Optional) Rx Power Flag
rx_pwr_alrm_hi_fc	(Optional) Rx Power Alarm High
rx_pwr_alrm_lo_fc	(Optional) Rx Power Alarm Low
rx_pwr_warn_hi_fc	(Optional) Rx Power Warning High
rx_pwr_warn_lo_fc	(Optional) Rx Power Warning Low
xmit_faults_fc	(Optional) Transmit Fault Count

Command Mode

/exec

show interface transceiver

show interface <ifid_transceiver> transceiver [ calibrations | details | sprom ] [ __readonly__ TABLE_interface <interface> [ <sfp> ] [ <qsfp_or_cfp> ] [ <type> ] [ <name> ] [ <partnum> ] [ <rev> ] [ <serialnum> ] [ <nom_bitrate> ] [ <len_9> ] [ <len_9_2> ] [ <len_50> ] [ <len_625> ] [ <len_cu> ] [ <len_50_OM3> ] [ <txcvr_type> ] [ <connector_type> ] [ <bit_encoding> ] [ <protocol_type> ] [ <10gbe_code> ] [ <fiber_type_byte0> ] [ <fiber_type_byte1> ] [ <tx_range> ] [ <cable_type> ] [ <ciscoid> ] [ <ciscoid_1> ] [ <cisco_part_number> ] [ <cisco_product_id> ] [ <cisco_vendor_id> ] [ <firmware_version> ] [ <identifier> ] [ <ext_identifier> ] [ <connector> ] [ <infiniband_compliance_code> ] [ <sonet_compliance_code> ] [ <gigabit_ethernet_compliance_code> ] [ <fibre_chan_link_length> ] [ <fibre_chan_trans_technology> ] [ <fibre_chan_trans_tech_reserved> ] [ <fibre_chan_transmission_media> ] [ <fibre_chan_speed> ] [ <encoding> ] [ <br_nominal> ] [ <reserved1> ] [ <length_smf> ] [ <length_om3> ] [ <length_om2> ] [ <length_om1> ] [ <length_9u_1> ] [ <length_9u_2> ] [ <length_50u> ] [ <length_60u> ] [ <length_copper> ] [ <reserved3> ] [ <vendor_oui> ] [ <vendor_part_no> ] [ <vendor_revision> ] [ <reserved4> ] [ <check_code_id> ] [ <options> ] [ <br_max> ] [ <br_min> ] [ <vendor_serial_no> ] [ <data_code> ] [ <diagnostic_monitoring_type> ] [ <enhanced_options> ] [ <sff8472compliance> ] [ <check_code_ext> ] [ <vendor_specific_data_id_data> ] [ <info_not_available> ] [ <temp_slope> ] [ <temp_offset> ] [ <volt_slope> ] [ <volt_offset> ] [ <curr_slope> ] [ <curr_offset> ] [ <tx_pwr_slope> ] [ <tx_pwr_offset> ] [ <rx_pwr_4> ] [ <rx_pwr_3> ] [ <rx_pwr_2> ] [ <rx_pwr_1> ] [ <rx_pwr_0> ] [ TABLE_lane [ <lane_number> ] [ <temperature> ] [ <temp_flag> ] [ <temp_alrm_hi> ] [ <temp_alrm_lo> ] [ <temp_warn_hi> ] [ <temp_warn_lo> ] [ <voltage> ] [ <volt_flag> ] [ <volt_alrm_hi> ] [ <volt_alrm_lo> ] [ <volt_warn_hi> ] [ <volt_warn_lo> ] [ <current> ] [ <current_flag> ] [ <current_alrm_hi> ] [ <current_alrm_lo> ] [ <current_warn_hi> ] [ <current_warn_lo> ] [ <tx_pwr> ] [ <tx_pwr_flag> ] [ <tx_pwr_alrm_hi> ] [ <tx_pwr_alrm_lo> ] [ <tx_pwr_warn_hi> ] [ <tx_pwr_warn_lo> ] [ <rx_pwr> ] [ <rx_pwr_flag> ] [ <rx_pwr_alrm_hi> ] [ <rx_pwr_alrm_lo> ] [ <rx_pwr_warn_hi> ] [ <rx_pwr_warn_lo> ] [ <xmit_faults> ] [ <snr> ] [ <snr_flag> ] [ <snr_alrm_hi> ] [ <snr_alrm_lo> ] [ <snr_warn_hi> ] [ <snr_warn_lo> ] [ <isi> ] [ <isi_flag> ] [ <isi_alrm_hi> ] [ <isi_alrm_lo> ] [ <isi_warn_hi> ] [ <isi_warn_lo> ] [ <pam> ] [ <pam_flag> ] [ <pam_alrm_hi> ] [ <pam_alrm_lo> ] [ <pam_warn_hi> ] [ <pam_warn_lo> ] [ <pre_fec_ber> ] [ <pre_fec_ber_flag> ] [ <pre_fec_ber_alrm_hi> ] [ <pre_fec_ber_alrm_lo> ] [ <pre_fec_ber_warn_hi> ] [ <pre_fec_ber_warn_lo> ] [ <uncorrect_ber> ] [ <uncorrect_ber_flag> ] [ <uncorrect_ber_alrm_hi> ] [ <uncorrect_ber_alrm_lo> ] [ <uncorrect_ber_warn_hi> ] [ <uncorrect_ber_warn_lo> ] [ <tec_current> ] [ <tec_current_flag> ] [ <tec_current_alrm_hi> ] [ <tec_current_alrm_lo> ] [ <tec_current_warn_hi> ] [ <tec_current_warn_lo> ] [ <laser_freq> ] [ <laser_freq_flag> ] [ <laser_freq_alrm_hi> ] [ <laser_freq_alrm_lo> ] [ <laser_freq_warn_hi> ] [ <laser_freq_warn_lo> ] [ <laser_temp> ] [ <laser_temp_flag> ] [ <laser_temp_alrm_hi> ] [ <laser_temp_alrm_lo> ] [ <laser_temp_warn_hi> ] [ <laser_temp_warn_lo> ] [ <pre_fec_ber_acc> ] [ <pre_fec_ber_acc_flag> ] [ <pre_fec_ber_acc_alrm_hi> ] [ <pre_fec_ber_acc_alrm_lo> ] [ <pre_fec_ber_acc_warn_hi> ] [ <pre_fec_ber_acc_warn_lo> ] [ <pre_fec_ber_min> ] [ <pre_fec_ber_min_flag> ] [ <pre_fec_ber_min_alrm_hi> ] [ <pre_fec_ber_min_alrm_lo> ] [ <pre_fec_ber_min_warn_hi> ] [ <pre_fec_ber_min_warn_lo> ] [ <pre_fec_ber_max> ] [ <pre_fec_ber_max_flag> ] [ <pre_fec_ber_max_alrm_hi> ] [ <pre_fec_ber_max_alrm_lo> ] [ <pre_fec_ber_max_warn_hi> ] [ <pre_fec_ber_max_warn_lo> ] [ <pre_fec_ber_cur> ] [ <pre_fec_ber_cur_flag> ] [ <pre_fec_ber_cur_alrm_hi> ] [ <pre_fec_ber_cur_alrm_lo> ] [ <pre_fec_ber_cur_warn_hi> ] [ <pre_fec_ber_cur_warn_lo> ] [ <uncorrect_ber_acc> ] [ <uncorrect_ber_acc_flag> ] [ <uncorrect_ber_acc_alrm_hi> ] [ <uncorrect_ber_acc_alrm_lo> ] [ <uncorrect_ber_acc_warn_hi> ] [ <uncorrect_ber_acc_warn_lo> ] [ <uncorrect_ber_min> ] [ <uncorrect_ber_min_flag> ] [ <uncorrect_ber_min_alrm_hi> ] [ <uncorrect_ber_min_alrm_lo> ] [ <uncorrect_ber_min_warn_hi> ] [ <uncorrect_ber_min_warn_lo> ] [ <uncorrect_ber_max> ] [ <uncorrect_ber_max_flag> ] [ <uncorrect_ber_max_alrm_hi> ] [ <uncorrect_ber_max_alrm_lo> ] [ <uncorrect_ber_max_warn_hi> ] [ <uncorrect_ber_max_warn_lo> ] [ <uncorrect_ber_cur> ] [ <uncorrect_ber_cur_flag> ] [ <uncorrect_ber_cur_alrm_hi> ] [ <uncorrect_ber_cur_alrm_lo> ] [ <uncorrect_ber_cur_warn_hi> ] [ <uncorrect_ber_cur_warn_lo> ] ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid_transceiver	Enter interface type and number in module/slot format
transceiver	Show interface transceiver information
calibrations	(Optional) Show interface transceiver calibration information
details	(Optional) Show interface transceiver detail information
sprom	(Optional) Show interface transceiver sprom information
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
sfp	(Optional) sfp
qsfp_or_cfp	(Optional) qsfp_or_cfp
type	(Optional) type
name	(Optional) Name
partnum	(Optional) part number
rev	(Optional) revision
serialnum	(Optional) serial number
nom_bitrate	(Optional) Nominal bit rate in MBits/sec
len_9	(Optional) Link length supported for 9/125um fiber in Km
len_9_2	(Optional) Link length supported for 9/125um fiber in m
len_50	(Optional) Link length supported for 50/125um fiber in m
len_625	(Optional) Link length supported for 62.5/125um fiber in m
len_cu	(Optional) Link length supported for copper sfp in m
len_50_OM3	(Optional) Link length supported for 50/125um fiber in m
txcvr_type	(Optional)
connector_type	(Optional)
bit_encoding	(Optional)
protocol_type	(Optional)
10gbe_code	(Optional)
fiber_type_byte0	(Optional)
fiber_type_byte1	(Optional)
tx_range	(Optional)
cable_type	(Optional)
ciscoid	(Optional) Cisco extended id
ciscoid_1	(Optional) Cisco extended id number
cisco_part_number	(Optional) Cisco part number
cisco_product_id	(Optional) Cisco product identifier
cisco_vendor_id	(Optional) Cisco vendor identifier
firmware_version	(Optional) Firmware version
identifier	(Optional) SFP Identifier
ext_identifier	(Optional) SFP Ext Identifier
connector	(Optional) SFP connector
infiniband_compliance_code	(Optional) SFP Infiniband Compliance Code
sonet_compliance_code	(Optional) Sonet Compliance Code
gigabit_ethernet_compliance_code	(Optional) Gigabit Ethernet Compliance Code
fibre_chan_link_length	(Optional) Fibre Chan Link Length
fibre_chan_trans_technology	(Optional) Fibre Chan Trans Technology
fibre_chan_trans_tech_reserved	(Optional) Fibre Chan Trans Tech Reserved
fibre_chan_transmission_media	(Optional) Fibre Chan Transmission Media
fibre_chan_speed	(Optional) Fibre Chan Speed
encoding	(Optional) Encoding
br_nominal	(Optional) BR Nominal
reserved1	(Optional) Reserved1
length_smf	(Optional) Length_SMF
length_om3	(Optional) Length_OM3
length_om2	(Optional) Length_OM2
length_om1	(Optional) Length_OM1
length_9u_1	(Optional) Length 9u 1
length_9u_2	(Optional) Length 9u 2
length_50u	(Optional) Length 50u
length_60u	(Optional) Length 60u
length_copper	(Optional) Length Copper
reserved3	(Optional) Reserved3
vendor_oui	(Optional) Vendor OUI
vendor_part_no	(Optional) Vendor Part No
vendor_revision	(Optional) Vendor Revision
reserved4	(Optional) Reserved4
check_code_id	(Optional) Check Code ID
options	(Optional) Options
br_max	(Optional) BR max
br_min	(Optional) BR min
vendor_serial_no	(Optional) Vendor Serial No
data_code	(Optional) Data code
diagnostic_monitoring_type	(Optional) Diagnostic Monitoring Type
enhanced_options	(Optional) Enhanced Options
sff8472compliance	(Optional) SFF8472Compliance
check_code_ext	(Optional) Check code ext
vendor_specific_data_id_data	(Optional) Vendor Specific Data Id Data
info_not_available	(Optional) Info not available
temp_slope	(Optional) Temperature slope
temp_offset	(Optional) Temperature offset
volt_slope	(Optional) Voltage slope
volt_offset	(Optional) Voltage offset
curr_slope	(Optional) Current slope
curr_offset	(Optional) Current offset
tx_pwr_slope	(Optional) Tx power slope
tx_pwr_offset	(Optional) Tx power offset
rx_pwr_4	(Optional) Rx power 4
rx_pwr_3	(Optional) Rx power 3
rx_pwr_2	(Optional) Rx power 2
rx_pwr_1	(Optional) Rx power 1
rx_pwr_0	(Optional) Rx power 0
TABLE_lane	(Optional) show lane
lane_number	(Optional) Lane number
temperature	(Optional) Temperature
temp_flag	(Optional) Temperature Flag
temp_alrm_hi	(Optional) Temperature Alarm High
temp_alrm_lo	(Optional) Temperature Alarm Low
temp_warn_hi	(Optional) Temperature Warning High
temp_warn_lo	(Optional) Temperature Warning Low
voltage	(Optional) Voltage
volt_flag	(Optional) Voltage Flag
volt_alrm_hi	(Optional) Voltage Alarm High
volt_alrm_lo	(Optional) Voltage Alarm Low
volt_warn_hi	(Optional) Voltage Warning High
volt_warn_lo	(Optional) Voltage Warning Low
current	(Optional) Current
current_flag	(Optional) Current Flag
current_alrm_hi	(Optional) Current Alarm High
current_alrm_lo	(Optional) Current Alarm Low
current_warn_hi	(Optional) Current Warning High
current_warn_lo	(Optional) Current Warning Low
tx_pwr	(Optional) Tx Power
tx_pwr_flag	(Optional) Tx Power Flag
tx_pwr_alrm_hi	(Optional) Tx Power Alarm High
tx_pwr_alrm_lo	(Optional) Tx Power Alarm Low
tx_pwr_warn_hi	(Optional) Tx Power Warning High
tx_pwr_warn_lo	(Optional) Tx Power Warning Low
rx_pwr	(Optional) Rx Power
rx_pwr_flag	(Optional) Rx Power Flag
rx_pwr_alrm_hi	(Optional) Rx Power Alarm High
rx_pwr_alrm_lo	(Optional) Rx Power Alarm Low
rx_pwr_warn_hi	(Optional) Rx Power Warning High
rx_pwr_warn_lo	(Optional) Rx Power Warning Low
xmit_faults	(Optional) Transmit Fault Count
snr	(Optional) RX Signal-to-Noise Ratio (SNR)
snr_flag	(Optional) SNR Flag
snr_alrm_hi	(Optional) SNR Alarm High
snr_alrm_lo	(Optional) SNR Alarm Low
snr_warn_hi	(Optional) SNR Warning High
snr_warn_lo	(Optional) SNR Warning Low
isi	(Optional) Residual-Dispersion(ISI)
isi_flag	(Optional) ISI Flag
isi_alrm_hi	(Optional) ISI alarm high
isi_alrm_lo	(Optional) ISI alarm low
isi_warn_hi	(Optional) ISI warning high
isi_warn_lo	(Optional) ISI warning low
pam	(Optional) PAM Transition
pam_flag	(Optional) PAM Flag
pam_alrm_hi	(Optional) PAM alarm high
pam_alrm_lo	(Optional) PAM alarm low
pam_warn_hi	(Optional) PAM warning high
pam_warn_lo	(Optional) PAM warning low
pre_fec_ber	(Optional) Pre-FEC BER
pre_fec_ber_flag	(Optional) Pre-FEC BER flag
pre_fec_ber_alrm_hi	(Optional) Pre-FEC BER alarm high
pre_fec_ber_alrm_lo	(Optional) Pre-FEC BER alarm low
pre_fec_ber_warn_hi	(Optional) Pre-FEC BER warning high
pre_fec_ber_warn_lo	(Optional) Pre-FEC BER warning low
uncorrect_ber	(Optional) Uncorrected BER
uncorrect_ber_flag	(Optional) Uncorrected BER flag
uncorrect_ber_alrm_hi	(Optional) Uncorrected BER alarm high
uncorrect_ber_alrm_lo	(Optional) Uncorrected BER alarm low
uncorrect_ber_warn_hi	(Optional) Uncorrected BER warning high
uncorrect_ber_warn_lo	(Optional) Uncorrected BER warning low
tec_current	(Optional) TEC Current
tec_current_flag	(Optional) TEC Current flag
tec_current_alrm_hi	(Optional) TEC Current Alarm High
tec_current_alrm_lo	(Optional) TEC Current Alarm Low
tec_current_warn_hi	(Optional) TEC Current Warning High
tec_current_warn_lo	(Optional) TEC Current Warning Low
laser_freq	(Optional) Laser Frequency
laser_freq_flag	(Optional) Laser Frequency flag
laser_freq_alrm_hi	(Optional) Laser Frequency Alarm High
laser_freq_alrm_lo	(Optional) Laser Frequency Alarm Low
laser_freq_warn_hi	(Optional) Laser Frequency Warning High
laser_freq_warn_lo	(Optional) Laser Frequency Warning Low
laser_temp	(Optional) Laser Temperature
laser_temp_flag	(Optional) Laser Temperature flag
laser_temp_alrm_hi	(Optional) Laser Temperature Alarm High
laser_temp_alrm_lo	(Optional) Laser Temperature Alarm Low
laser_temp_warn_hi	(Optional) Laser Temperature Warning High
laser_temp_warn_lo	(Optional) Laser Temperature Warning Low
pre_fec_ber_acc	(Optional) Pre-FEC BER Acc
pre_fec_ber_acc_flag	(Optional) Pre-FEC BER Acc flag
pre_fec_ber_acc_alrm_hi	(Optional) Pre-FEC BER Acc alarm high
pre_fec_ber_acc_alrm_lo	(Optional) Pre-FEC BER Acc alarm low
pre_fec_ber_acc_warn_hi	(Optional) Pre-FEC BER Acc warning high
pre_fec_ber_acc_warn_lo	(Optional) Pre-FEC BER Acc warning low
pre_fec_ber_min	(Optional) Pre-FEC BER Min
pre_fec_ber_min_flag	(Optional) Pre-FEC BER Min flag
pre_fec_ber_min_alrm_hi	(Optional) Pre-FEC BER Min alarm high
pre_fec_ber_min_alrm_lo	(Optional) Pre-FEC BER Min alarm low
pre_fec_ber_min_warn_hi	(Optional) Pre-FEC BER Min warning high
pre_fec_ber_min_warn_lo	(Optional) Pre-FEC BER Min warning low
pre_fec_ber_max	(Optional) Pre-FEC BER Max
pre_fec_ber_max_flag	(Optional) Pre-FEC BER Max flag
pre_fec_ber_max_alrm_hi	(Optional) Pre-FEC BER Max alarm high
pre_fec_ber_max_alrm_lo	(Optional) Pre-FEC BER Max alarm low
pre_fec_ber_max_warn_hi	(Optional) Pre-FEC BER Max warning high
pre_fec_ber_max_warn_lo	(Optional) Pre-FEC BER Max warning low
pre_fec_ber_cur	(Optional) Pre-FEC BER Cur
pre_fec_ber_cur_flag	(Optional) Pre-FEC BER Cur flag
pre_fec_ber_cur_alrm_hi	(Optional) Pre-FEC BER Cur alarm high
pre_fec_ber_cur_alrm_lo	(Optional) Pre-FEC BER Cur alarm low
pre_fec_ber_cur_warn_hi	(Optional) Pre-FEC BER Cur warning high
pre_fec_ber_cur_warn_lo	(Optional) Pre-FEC BER Cur warning low
uncorrect_ber_acc	(Optional) Uncorrected BER Acc
uncorrect_ber_acc_flag	(Optional) Uncorrected BER Acc flag
uncorrect_ber_acc_alrm_hi	(Optional) Uncorrected BER Acc alarm high
uncorrect_ber_acc_alrm_lo	(Optional) Uncorrected BER Acc alarm low
uncorrect_ber_acc_warn_hi	(Optional) Uncorrected BER Acc warning high
uncorrect_ber_acc_warn_lo	(Optional) Uncorrected BER Acc warning low
uncorrect_ber_min	(Optional) Uncorrected BER Min
uncorrect_ber_min_flag	(Optional) Uncorrected BER Min flag
uncorrect_ber_min_alrm_hi	(Optional) Uncorrected BER Min alarm high
uncorrect_ber_min_alrm_lo	(Optional) Uncorrected BER Min alarm low
uncorrect_ber_min_warn_hi	(Optional) Uncorrected BER Min warning high
uncorrect_ber_min_warn_lo	(Optional) Uncorrected BER Min warning low
uncorrect_ber_max	(Optional) Uncorrected BER Max
uncorrect_ber_max_flag	(Optional) Uncorrected BER Max flag
uncorrect_ber_max_alrm_hi	(Optional) Uncorrected BER Max alarm high
uncorrect_ber_max_alrm_lo	(Optional) Uncorrected BER Max alarm low
uncorrect_ber_max_warn_hi	(Optional) Uncorrected BER Max warning high
uncorrect_ber_max_warn_lo	(Optional) Uncorrected BER Max warning low
uncorrect_ber_cur	(Optional) Uncorrected BER Cur
uncorrect_ber_cur_flag	(Optional) Uncorrected BER Cur flag
uncorrect_ber_cur_alrm_hi	(Optional) Uncorrected BER Cur alarm high
uncorrect_ber_cur_alrm_lo	(Optional) Uncorrected BER Cur alarm low
uncorrect_ber_cur_warn_hi	(Optional) Uncorrected BER Cur warning high
uncorrect_ber_cur_warn_lo	(Optional) Uncorrected BER Cur warning low

Command Mode

/exec

show interface transceiver fex-fabric

show interface transceiver fex-fabric [ calibrations | details ] [ __readonly__ TABLE_interface <interface> [ <sfp> ] [ <type> ] [ <name> ] [ <partnum> ] [ <rev> ] [ <serialnum> ] [ <nom_bitrate> ] [ <len_50> ] [ <len_625> ] [ <len_50_OM3> ] [ <ciscoid> ] [ <ciscoid_1> ] [ <info_not_available> ] [ <temp_slope> ] [ <temp_offset> ] [ <volt_slope> ] [ <volt_offset> ] [ <curr_slope> ] [ <curr_offset> ] [ <tx_pwr_slope> ] [ <tx_pwr_offset> ] [ <rx_pwr_4> ] [ <rx_pwr_3> ] [ <rx_pwr_2> ] [ <rx_pwr_1> ] [ <rx_pwr_0> ] [ TABLE_lane [ <lane_number> ] [ <temperature> ] [ <temp_flag> ] [ <temp_alrm_hi> ] [ <temp_alrm_lo> ] [ <temp_warn_hi> ] [ <temp_warn_lo> ] [ <voltage> ] [ <volt_flag> ] [ <volt_alrm_hi> ] [ <volt_alrm_lo> ] [ <volt_warn_hi> ] [ <volt_warn_lo> ] [ <current> ] [ <current_flag> ] [ <current_alrm_hi> ] [ <current_alrm_lo> ] [ <current_warn_hi> ] [ <current_warn_lo> ] [ <tx_pwr> ] [ <tx_pwr_flag> ] [ <tx_pwr_alrm_hi> ] [ <tx_pwr_alrm_lo> ] [ <tx_pwr_warn_hi> ] [ <tx_pwr_warn_lo> ] [ <rx_pwr> ] [ <rx_pwr_flag> ] [ <rx_pwr_alrm_hi> ] [ <rx_pwr_alrm_lo> ] [ <rx_pwr_warn_hi> ] [ <rx_pwr_warn_lo> ] [ <xmit_faults> ] [ <snr> ] [ <snr_flag> ] [ <snr_alrm_hi> ] [ <snr_alrm_lo> ] [ <snr_warn_hi> ] [ <snr_warn_lo> ] [ <isi> ] [ <isi_flag> ] [ <isi_alrm_hi> ] [ <isi_alrm_lo> ] [ <isi_warn_hi> ] [ <isi_warn_lo> ] [ <pam> ] [ <pam_flag> ] [ <pam_alrm_hi> ] [ <pam_alrm_lo> ] [ <pam_warn_hi> ] [ <pam_warn_lo> ] [ <pre_fec_ber> ] [ <pre_fec_ber_flag> ] [ <pre_fec_ber_alrm_hi> ] [ <pre_fec_ber_alrm_lo> ] [ <pre_fec_ber_warn_hi> ] [ <pre_fec_ber_warn_lo> ] [ <uncorrect_ber> ] [ <uncorrect_ber_flag> ] [ <uncorrect_ber_alrm_hi> ] [ <uncorrect_ber_alrm_lo> ] [ <uncorrect_ber_warn_hi> ] [ <uncorrect_ber_warn_lo> ] [ <tec_current> ] [ <tec_current_flag> ] [ <tec_current_alrm_hi> ] [ <tec_current_alrm_lo> ] [ <tec_current_warn_hi> ] [ <tec_current_warn_lo> ] [ <laser_freq> ] [ <laser_freq_flag> ] [ <laser_freq_alrm_hi> ] [ <laser_freq_alrm_lo> ] [ <laser_freq_warn_hi> ] [ <laser_freq_warn_lo> ] [ <laser_temp> ] [ <laser_temp_flag> ] [ <laser_temp_alrm_hi> ] [ <laser_temp_alrm_lo> ] [ <laser_temp_warn_hi> ] [ <laser_temp_warn_lo> ] [ <pre_fec_ber_acc> ] [ <pre_fec_ber_acc_flag> ] [ <pre_fec_ber_acc_alrm_hi> ] [ <pre_fec_ber_acc_alrm_lo> ] [ <pre_fec_ber_acc_warn_hi> ] [ <pre_fec_ber_acc_warn_lo> ] [ <pre_fec_ber_min> ] [ <pre_fec_ber_min_flag> ] [ <pre_fec_ber_min_alrm_hi> ] [ <pre_fec_ber_min_alrm_lo> ] [ <pre_fec_ber_min_warn_hi> ] [ <pre_fec_ber_min_warn_lo> ] [ <pre_fec_ber_max> ] [ <pre_fec_ber_max_flag> ] [ <pre_fec_ber_max_alrm_hi> ] [ <pre_fec_ber_max_alrm_lo> ] [ <pre_fec_ber_max_warn_hi> ] [ <pre_fec_ber_max_warn_lo> ] [ <pre_fec_ber_cur> ] [ <pre_fec_ber_cur_flag> ] [ <pre_fec_ber_cur_alrm_hi> ] [ <pre_fec_ber_cur_alrm_lo> ] [ <pre_fec_ber_cur_warn_hi> ] [ <pre_fec_ber_cur_warn_lo> ] [ <uncorrect_ber_acc> ] [ <uncorrect_ber_acc_flag> ] [ <uncorrect_ber_acc_alrm_hi> ] [ <uncorrect_ber_acc_alrm_lo> ] [ <uncorrect_ber_acc_warn_hi> ] [ <uncorrect_ber_acc_warn_lo> ] [ <uncorrect_ber_min> ] [ <uncorrect_ber_min_flag> ] [ <uncorrect_ber_min_alrm_hi> ] [ <uncorrect_ber_min_alrm_lo> ] [ <uncorrect_ber_min_warn_hi> ] [ <uncorrect_ber_min_warn_lo> ] [ <uncorrect_ber_max> ] [ <uncorrect_ber_max_flag> ] [ <uncorrect_ber_max_alrm_hi> ] [ <uncorrect_ber_max_alrm_lo> ] [ <uncorrect_ber_max_warn_hi> ] [ <uncorrect_ber_max_warn_lo> ] [ <uncorrect_ber_cur> ] [ <uncorrect_ber_cur_flag> ] [ <uncorrect_ber_cur_alrm_hi> ] [ <uncorrect_ber_cur_alrm_lo> ] [ <uncorrect_ber_cur_warn_hi> ] [ <uncorrect_ber_cur_warn_lo> ] ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
transceiver	Show interface transceiver information
fex-fabric	Show FEX interface transceiver information
calibrations	(Optional) Show interface transceiver calibration information
details	(Optional) Show interface transceiver detail information
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
sfp	(Optional) sfp
type	(Optional) type
name	(Optional) Name
partnum	(Optional) part number
rev	(Optional) revision
serialnum	(Optional) serial number
nom_bitrate	(Optional) Nominal bit rate in MBits/sec
len_50	(Optional) Link length supported for 50/125mm fiber
len_625	(Optional) Link length supported for 62.5/125mm fiber
len_50_OM3	(Optional) Link length supported for 50/125um fiber in m
ciscoid	(Optional) Cisco extended id
ciscoid_1	(Optional) Cisco extended id number
info_not_available	(Optional) Error case if sfp info not available
temp_slope	(Optional) Temperature slope
temp_offset	(Optional) Temperature offset
volt_slope	(Optional) Voltage slope
volt_offset	(Optional) Voltage offset
curr_slope	(Optional) Current slope
curr_offset	(Optional) Current offset
tx_pwr_slope	(Optional) Tx power slope
tx_pwr_offset	(Optional) Tx power offset
rx_pwr_4	(Optional) Rx power 4
rx_pwr_3	(Optional) Rx power 3
rx_pwr_2	(Optional) Rx power 2
rx_pwr_1	(Optional) Rx power 1
rx_pwr_0	(Optional) Rx power 0
TABLE_lane	(Optional) show lane
lane_number	(Optional) Lane number
temperature	(Optional) Temperature
temp_flag	(Optional) Temperature Flag
temp_alrm_hi	(Optional) Temperature Alarm High
temp_alrm_lo	(Optional) Temperature Alarm Low
temp_warn_hi	(Optional) Temperature Warning High
temp_warn_lo	(Optional) Temperature Warning Low
voltage	(Optional) Voltage
volt_flag	(Optional) Voltage Flag
volt_alrm_hi	(Optional) Voltage Alarm High
volt_alrm_lo	(Optional) Voltage Alarm Low
volt_warn_hi	(Optional) Voltage Warning High
volt_warn_lo	(Optional) Voltage Warning Low
current	(Optional) Current
current_flag	(Optional) Current Flag
current_alrm_hi	(Optional) Current Alarm High
current_alrm_lo	(Optional) Current Alarm Low
current_warn_hi	(Optional) Current Warning High
current_warn_lo	(Optional) Current Warning Low
tx_pwr	(Optional) Tx Power
tx_pwr_flag	(Optional) Tx Power Flag
tx_pwr_alrm_hi	(Optional) Tx Power Alarm High
tx_pwr_alrm_lo	(Optional) Tx Power Alarm Low
tx_pwr_warn_hi	(Optional) Tx Power Warning High
tx_pwr_warn_lo	(Optional) Tx Power Warning Low
rx_pwr	(Optional) Rx Power
rx_pwr_flag	(Optional) Rx Power Flag
rx_pwr_alrm_hi	(Optional) Rx Power Alarm High
rx_pwr_alrm_lo	(Optional) Rx Power Alarm Low
rx_pwr_warn_hi	(Optional) Rx Power Warning High
rx_pwr_warn_lo	(Optional) Rx Power Warning Low
xmit_faults	(Optional) Transmit Fault Count
snr	(Optional) RX Signal-to-Noise Ratio (SNR)
snr_flag	(Optional) SNR Flag
snr_alrm_hi	(Optional) SNR Alarm High
snr_alrm_lo	(Optional) SNR Alarm Low
snr_warn_hi	(Optional) SNR Warning High
snr_warn_lo	(Optional) SNR Warning Low
isi	(Optional) Residual-Dispersion(ISI)
isi_flag	(Optional) ISI Flag
isi_alrm_hi	(Optional) ISI alarm high
isi_alrm_lo	(Optional) ISI alarm low
isi_warn_hi	(Optional) ISI warning high
isi_warn_lo	(Optional) ISI warning low
pam	(Optional) PAM Transition
pam_flag	(Optional) PAM Flag
pam_alrm_hi	(Optional) PAM alarm high
pam_alrm_lo	(Optional) PAM alarm low
pam_warn_hi	(Optional) PAM warning high
pam_warn_lo	(Optional) PAM warning low
pre_fec_ber	(Optional) Pre-FEC BER
pre_fec_ber_flag	(Optional) Pre-FEC BER flag
pre_fec_ber_alrm_hi	(Optional) Pre-FEC BER alarm high
pre_fec_ber_alrm_lo	(Optional) Pre-FEC BER alarm low
pre_fec_ber_warn_hi	(Optional) Pre-FEC BER warning high
pre_fec_ber_warn_lo	(Optional) Pre-FEC BER warning low
uncorrect_ber	(Optional) Uncorrected BER
uncorrect_ber_flag	(Optional) Uncorrected BER flag
uncorrect_ber_alrm_hi	(Optional) Uncorrected BER alarm high
uncorrect_ber_alrm_lo	(Optional) Uncorrected BER alarm low
uncorrect_ber_warn_hi	(Optional) Uncorrected BER warning high
uncorrect_ber_warn_lo	(Optional) Uncorrected BER warning low
tec_current	(Optional) TEC Current
tec_current_flag	(Optional) TEC Current flag
tec_current_alrm_hi	(Optional) TEC Current Alarm High
tec_current_alrm_lo	(Optional) TEC Current Alarm Low
tec_current_warn_hi	(Optional) TEC Current Warning High
tec_current_warn_lo	(Optional) TEC Current Warning Low
laser_freq	(Optional) Laser Frequency
laser_freq_flag	(Optional) Laser Frequency flag
laser_freq_alrm_hi	(Optional) Laser Frequency Alarm High
laser_freq_alrm_lo	(Optional) Laser Frequency Alarm Low
laser_freq_warn_hi	(Optional) Laser Frequency Warning High
laser_freq_warn_lo	(Optional) Laser Frequency Warning Low
laser_temp	(Optional) Laser Temperature
laser_temp_flag	(Optional) Laser Temperature flag
laser_temp_alrm_hi	(Optional) Laser Temperature Alarm High
laser_temp_alrm_lo	(Optional) Laser Temperature Alarm Low
laser_temp_warn_hi	(Optional) Laser Temperature Warning High
laser_temp_warn_lo	(Optional) Laser Temperature Warning Low
pre_fec_ber_acc	(Optional) Pre-FEC BER Acc
pre_fec_ber_acc_flag	(Optional) Pre-FEC BER Acc flag
pre_fec_ber_acc_alrm_hi	(Optional) Pre-FEC BER Acc alarm high
pre_fec_ber_acc_alrm_lo	(Optional) Pre-FEC BER Acc alarm low
pre_fec_ber_acc_warn_hi	(Optional) Pre-FEC BER Acc warning high
pre_fec_ber_acc_warn_lo	(Optional) Pre-FEC BER Acc warning low
pre_fec_ber_min	(Optional) Pre-FEC BER Min
pre_fec_ber_min_flag	(Optional) Pre-FEC BER Min flag
pre_fec_ber_min_alrm_hi	(Optional) Pre-FEC BER Min alarm high
pre_fec_ber_min_alrm_lo	(Optional) Pre-FEC BER Min alarm low
pre_fec_ber_min_warn_hi	(Optional) Pre-FEC BER Min warning high
pre_fec_ber_min_warn_lo	(Optional) Pre-FEC BER Min warning low
pre_fec_ber_max	(Optional) Pre-FEC BER Max
pre_fec_ber_max_flag	(Optional) Pre-FEC BER Max flag
pre_fec_ber_max_alrm_hi	(Optional) Pre-FEC BER Max alarm high
pre_fec_ber_max_alrm_lo	(Optional) Pre-FEC BER Max alarm low
pre_fec_ber_max_warn_hi	(Optional) Pre-FEC BER Max warning high
pre_fec_ber_max_warn_lo	(Optional) Pre-FEC BER Max warning low
pre_fec_ber_cur	(Optional) Pre-FEC BER Cur
pre_fec_ber_cur_flag	(Optional) Pre-FEC BER Cur flag
pre_fec_ber_cur_alrm_hi	(Optional) Pre-FEC BER Cur alarm high
pre_fec_ber_cur_alrm_lo	(Optional) Pre-FEC BER Cur alarm low
pre_fec_ber_cur_warn_hi	(Optional) Pre-FEC BER Cur warning high
pre_fec_ber_cur_warn_lo	(Optional) Pre-FEC BER Cur warning low
uncorrect_ber_acc	(Optional) Uncorrected BER Acc
uncorrect_ber_acc_flag	(Optional) Uncorrected BER Acc flag
uncorrect_ber_acc_alrm_hi	(Optional) Uncorrected BER Acc alarm high
uncorrect_ber_acc_alrm_lo	(Optional) Uncorrected BER Acc alarm low
uncorrect_ber_acc_warn_hi	(Optional) Uncorrected BER Acc warning high
uncorrect_ber_acc_warn_lo	(Optional) Uncorrected BER Acc warning low
uncorrect_ber_min	(Optional) Uncorrected BER Min
uncorrect_ber_min_flag	(Optional) Uncorrected BER Min flag
uncorrect_ber_min_alrm_hi	(Optional) Uncorrected BER Min alarm high
uncorrect_ber_min_alrm_lo	(Optional) Uncorrected BER Min alarm low
uncorrect_ber_min_warn_hi	(Optional) Uncorrected BER Min warning high
uncorrect_ber_min_warn_lo	(Optional) Uncorrected BER Min warning low
uncorrect_ber_max	(Optional) Uncorrected BER Max
uncorrect_ber_max_flag	(Optional) Uncorrected BER Max flag
uncorrect_ber_max_alrm_hi	(Optional) Uncorrected BER Max alarm high
uncorrect_ber_max_alrm_lo	(Optional) Uncorrected BER Max alarm low
uncorrect_ber_max_warn_hi	(Optional) Uncorrected BER Max warning high
uncorrect_ber_max_warn_lo	(Optional) Uncorrected BER Max warning low
uncorrect_ber_cur	(Optional) Uncorrected BER Cur
uncorrect_ber_cur_flag	(Optional) Uncorrected BER Cur flag
uncorrect_ber_cur_alrm_hi	(Optional) Uncorrected BER Cur alarm high
uncorrect_ber_cur_alrm_lo	(Optional) Uncorrected BER Cur alarm low
uncorrect_ber_cur_warn_hi	(Optional) Uncorrected BER Cur warning high
uncorrect_ber_cur_warn_lo	(Optional) Uncorrected BER Cur warning low

Command Mode

/exec

show interface transceiver fex-fabric

show interface <ifeth_trans> transceiver fex-fabric [ calibrations | details ] [ __readonly__ TABLE_interface <interface> <sfp> <name> <partnum> <rev> <serialnum> <nom_bitrate> <len_50> <len_625> <ciscoid> <ciscoid_1> [ <temp_slope> ] [ <temp_offset> ] [ <volt_slope> ] [ <volt_offset> ] [ <curr_slope> ] [ <curr_offset> ] [ <tx_pwr_slope> ] [ <tx_pwr_offset> ] [ <rx_pwr_4> ] [ <rx_pwr_3> ] [ <rx_pwr_2> ] [ <rx_pwr_1> ] [ <rx_pwr_0> ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifeth_trans	Enter interface type and number in module/slot format
transceiver	Show interface transceiver information
fex-fabric	Show FEX interface transceiver information
calibrations	(Optional) Show interface transceiver calibration information
details	(Optional) Show interface transceiver detail information
__readonly__	(Optional) Read Only
interface	(Optional) Interface index
TABLE_interface	(Optional) show interface
sfp	(Optional) sfp
name	(Optional) Name
partnum	(Optional) part number
rev	(Optional) revision
serialnum	(Optional) serial number
nom_bitrate	(Optional) Nominal bit rate in MBits/sec
len_50	(Optional) Link length supported for 50/125mm fiber
len_625	(Optional) Link length supported for 62.5/125mm fiber
ciscoid	(Optional) Cisco extended id
ciscoid_1	(Optional) Cisco extended id number
temp_slope	(Optional) Temperature slope
temp_offset	(Optional) Temperature offset
volt_slope	(Optional) Voltage slope
volt_offset	(Optional) Voltage offset
curr_slope	(Optional) Current slope
curr_offset	(Optional) Current offset
tx_pwr_slope	(Optional) Tx power slope
tx_pwr_offset	(Optional) Tx power offset
rx_pwr_4	(Optional) Rx power 4
rx_pwr_3	(Optional) Rx power 3
rx_pwr_2	(Optional) Rx power 2
rx_pwr_1	(Optional) Rx power 1
rx_pwr_0	(Optional) Rx power 0

Command Mode

/exec

show interface transceiver inventory

Syntax Description


show	Show running system information
interface	Show interface status and information
transceiver	Show interface transceiver information
inventory	Show interface transceiver inventory

Command Mode

/exec

show interface trunk

show interface trunk [ module <module> | vlan <vlan_id> | fex <fex_num> ] [ __readonly__ [ { TABLE_interface <interface> <native> <status> <portchannel> } ] [ { TABLE_allowed_vlans <interface> <allowedvlans> } ] [ { TABLE_errored_vlans <interface> <erroredvlans> } ] [ { TABLE_stp_forward <interface> <stpfwd_vlans> } ] [ { TABLE_fabricpath_vlans <interface> <fabricpath_vlans> } ] [ { TABLE_vtp_pruning <interface> <vtppruning_vlans> } ] ]

Syntax Description


show	Show running system information
interface	Show interface status and information
trunk	Show interface trunk information
module	(Optional) Limit display to interfaces on module
module	(Optional) Enter module number
fex	(Optional) Limit display to interfaces on a FEX
fex_num	(Optional) Enter FEX number
vlan	(Optional) Show per vlan information for trunk
vlan_id	(Optional) Enter vlan range
interface	(Optional) Interface index
__readonly__	(Optional) Read Only
TABLE_interface	(Optional) show interface
interface	(Optional) Interface index
native	(Optional) Native VLAN
status	(Optional) Status
portchannel	(Optional) Port Channel
TABLE_allowed_vlans	(Optional) show allowed vlans
interface	(Optional) Interface index
allowedvlans	(Optional) VLANs allowed and active in management domain
TABLE_errored_vlans	(Optional) show errored vlans
interface	(Optional) Interface index
erroredvlans	(Optional) Errored VLANs
TABLE_stp_forward	(Optional) show STP forwarding VLANs
interface	(Optional) Interface index
stpfwd_vlans	(Optional) STP Forwarding VLANs
TABLE_fabricpath_vlans	(Optional) show fabricpath VLANs
interface	(Optional) Interface index
fabricpath_vlans	(Optional) FabricPath VLANs
TABLE_vtp_pruning	(Optional) show VTP pruning VLANs
vtppruning_vlans	(Optional) VTP Pruning VLANs

Command Mode

/exec

show interface trunk

show interface <ifeth_trnk> trunk [ __readonly__ { TABLE_interface <interface> <native> <status> <portchannel> } { TABLE_allowed_vlans <interface> <allowedvlans> } { TABLE_errored_vlans <interface> <erroredvlans> } { TABLE_stp_forward <interface> <stpfwd_vlans> } [ { TABLE_fabricpath_vlans <interface> <fabricpath_vlans> } ] { TABLE_vtp_pruning <interface> <vtppruning_vlans> } ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifeth_trnk	Enter interface type and number in module/slot format
trunk	Show interface trunk information
__readonly__	(Optional) Read Only
TABLE_interface	(Optional) show interface
interface	(Optional) Interface index
native	(Optional) Native VLAN
status	(Optional) Status
portchannel	(Optional) Port Channel
TABLE_allowed_vlans	(Optional) show allowed vlans
interface	(Optional) Interface index
allowedvlans	(Optional) VLANs allowed and active in management domain
TABLE_errored_vlans	(Optional) show errored vlans
interface	(Optional) Interface index
erroredvlans	(Optional) Errored VLANs
TABLE_stp_forward	(Optional) show STP forwarding VLANs
interface	(Optional) Interface index
stpfwd_vlans	(Optional) STP Forwarding VLANs
TABLE_fabricpath_vlans	(Optional) show fabricpath VLANs
interface	(Optional) Interface index
fabricpath_vlans	(Optional) FabricPath VLANs
TABLE_vtp_pruning	(Optional) show VTP pruning VLANs
interface	(Optional) Interface index
vtppruning_vlans	(Optional) VTP Pruning VLANs

Command Mode

/exec

show interface trunk vsan

show interface <ifid_trnk> trunk vsan [ <vsan_id> ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid_trnk	Enter interface type and number in module/slot format
trunk	Show interface trunk information
vsan	Show per vsan information for trunk
vsan_id	(Optional) Enter vsan range

Command Mode

/exec

show interface trunk vsan

show interface trunk vsan [ <vsan_id> ] [ __readonly__ { TABLE_interface_trunk [ <interface> ] [ <oper_state> ] [ <oper_state_reason> ] [ <bundle_str> ] [ TABLE_vsan_info { [ <vsan_num> ] [ <vsan_state> ] [ <vsan_state_reason> ] [ <fcid> ] } ] } ]

Syntax Description


show	Show running system information
interface	Show interface status and information
trunk	Show interface trunk information
vsan	Show per vsan information for trunk
vsan_id	(Optional) Enter vsan range
__readonly__	(Optional)
TABLE_interface_trunk	(Optional) interface trunk table
interface	(Optional) fc interface
oper_state	(Optional) the status of trunking
oper_state_reason	(Optional) reason for operation state
bundle_str	(Optional) bundle string
TABLE_vsan_info	(Optional) vsan information
vsan_num	(Optional) the vsan ID
vsan_state	(Optional) the ststus of vsan
vsan_state_reason	(Optional) reason for vsan state
fcid	(Optional) FCID

Command Mode

/exec

show interface trunk vsan

show interface <ifid_trnk> trunk vsan [ <vsan_id> ] [ __readonly__ { TABLE_interface_trunk [ <interface> ] [ <oper_state> ] [ <oper_state_reason> ] [ <bundle_str> ] [ TABLE_vsan_info { [ <vsan_num> ] [ <vsan_state> ] [ <vsan_state_reason> ] [ <fcid> ] } ] } ]

Syntax Description


show	Show running system information
interface	Show interface status and information
ifid_trnk	Enter interface type and number in module/slot format
trunk	Show interface trunk information
vsan	Show per vsan information for trunk
vsan_id	(Optional) Enter vsan range
__readonly__	(Optional) Read Only
TABLE_interface_trunk	(Optional) interface trunk table
interface	(Optional) fc interface
oper_state	(Optional) the status of trunking
oper_state_reason	(Optional) reason for operation state
bundle_str	(Optional) bundle string
TABLE_vsan_info	(Optional) vsan information
vsan_num	(Optional) the vsan ID
vsan_state	(Optional) the ststus of vsan
vsan_state_reason

Cisco Nexus 9000 Series NX-OS Command Reference (Show Commands), Release 9.2(x)

Bias-Free Language

Results

Chapter: I Show Commands

I Show Commands

show icam entries acl module inst

show icam entries multicast module

show icam prediction entries acl module inst

show icam prediction entries multicast module

show icam prediction resource acl_tcam module inst

show icam prediction scale

show icam resource acl_tcam module inst

show icam scale

show ieth-header-decode

show imp client

show imp client sa

show inband-telemetry exporter

show inband-telemetry flow-profile

show inband-telemetry monitor

show inband-telemetry queue-profile

show inband-telemetry record

show inband-telemetry sessions

show inband-telemetry watchlist

show incompatibility-all system

show incompatibility system

show install

show install all failed-standby

show install all failure-reason

show install all impact

show install all impact epld

show install all status

show install all time-stats

show install epld status

show install impact

show install impact

show install impact detail

show install log

show install mode

show install packages

show install patches

show interface

show interface

show interface

show interface

show interface

show interface

show interface

show interface

show interface

show interface

show interface aggregate-counters

show interface aggregate-counters

show interface aggregate-counters

show interface bbcredit

show interface brief

show interface brief

show interface brief

show interface brief

show interface brief

show interface brief

show interface brief

show interface brief

show interface brief

show interface cable-diagnostics-tdr

show interface capabilities

show interface capabilities

show interface capabilities

show interface counters

show interface counters

show interface counters

show interface counters

show interface counters

show interface counters

show interface counters

show interface counters brief

show interface counters brief

show interface counters detailed

show interface counters detailed

show interface counters detailed

show interface counters detailed