New Show Commands in Cisco NX-OS Release 9.2(2)
The following commands are added in this release.
-
show consistency-checker kim
-
show consistency-checker vxlan infra [ detail ]
-
show consistency-checker vxlan l2 [ detail ]
-
show consistency-checker vxlan l3 [ verbose ]
-
show forwarding distribution multicast vxlan dsg-db
-
show hardware profile packet-drop { status | data [ instance <cap_instance> ] | event [ instance <cap_instance> ] }
-
show icam health [ __readonly__ { <Version> } [ { TABLE_cpu <CpuTypeName> <CpuTypeValue> } ] [ { TABLE_mem <MemTypeName> <MemTypeValue> } ] [ { TABLE_ps <PsTypeName> <PsTypeValue> } ] ]
-
show icam itd [ __readonly__ { <Version> } [ { TABLE_svc <Svc> <DG> [ { TABLE_stats <OrigNode> <AssignTo> <Mode> <PktCnt> <PktPct> } ] } ] ]
-
show icam prediction resource acl_tcam module <module> inst <inst> trend [ __readonly__ <module> <instance> [ { TABLE_PREDICTION_ACL_feature <Feature> <Dir> <TCAM> <BANK> <Feature_Entries1> <Free_Entries1> <Percent_Util1> <Feature_Entries2> <Free_Entries2> <Percent_Util2> <Feature_Entries3> <Free_Entries3> <Percent_Util3> } ] [ <mod> <inst> { TABLE_PREDICTION_ACL_tcam <Tcam_no> <Bank_no> <Used1> <Free1> <Util1> <Used2> <Free2> <Util2> <Used3> <Free3> <Util3> } ] ]
-
show interface <ifeth_ctr> counters [ __readonly__ { TABLE_rx_counters <interface_rx> [ <eth_inbytes> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_l3in_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_bcastpkts> ] } { TABLE_tx_counters <interface_tx> [ <eth_outbytes> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_l3out_bytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_bcastpkts> ] } ]
-
show interface <ifeth_ctr> counters snmp [ __readonly__ { TABLE_rx_counters <interface_rx> [ <eth_inbytes> ] [ <eth_inucast> ] [ <eth_inmcast> ] [ <eth_inbcast> ] [ <eth_l3in_bytes> ] [ <eth_l3in_ucastpkts> ] [ <eth_l3in_mcastpkts> ] [ <eth_l3in_bcastpkts> ] } { TABLE_tx_counters <interface_tx> [ <eth_outbytes> ] [ <eth_outucast> ] [ <eth_outmcast> ] [ <eth_outbcast> ] [ <eth_l3out_bytes> ] [ <eth_l3out_ucastpkts> ] [ <eth_l3out_mcastpkts> ] [ <eth_l3out_bcastpkts> ] } ]
-
show nxapi syntax <cli>
-
show port-channel scale-fanout
-
show postcard-telemetry exporter [ name ] [ <exportername> ] [ __readonly__ <exporter> <description> <dest> <vrf> <vrf_id> <vrf_resolved> <dest_udp> <source_intf> <source_ip> <dscp> ]
-
show postcard-telemetry flow-profile [ name ] [ <flow-profilename> ] [ __readonly__ <flow-profile> <description> <dscp> <age> <latency> ]
-
show postcard-telemetry monitor [ name ] [ <monitorname> [ cache [ detailed ] ] ] [ __readonly__ <monitor> <use_count> <description> <record> <event> <exporter> <bucket_id> <src_addr> <dest_addr> <watchlist> ]
-
show postcard-telemetry queue-profile [ name ] [ <queue-profilename> ] [ __readonly__ <queue-profile> <description> <depth> <latency> ]
-
show postcard-telemetry sessions [ <monitorname> ] [ __readonly__ <monitor> ]
-
show postcard-telemetry watchlist [ name ] [ { <watchlistname> } ] [ __readonly__ <watchlist> <use_count> <description> <num_aces> <ace_seq_num> <ace_action> <ace_type> <ace_sip> <ace_sip_len> <ace_dip> <ace_dip_len> ]
-
show system image-verification
-
show system poap
-
show system security [ common-criteria ] [ __readonly__ { [ <common_criteria_o_status> ] } ]
-
show system simulate fan-presence
-
show ttag brief [ __readonly__ [ TABLE_ttag <ttag-ifindex> <state> ] <ttag-end> ]