New and Changed Information
This table summarizes the new and changed features for the Cisco Nexus 9000 Series NX-OS Multicast Routing Configuration Guide, Release 7.x and tells you where they are documented.
|
Feature |
Description |
Changed in Release |
Where Documented |
|---|---|---|---|
|
IGMP snooping |
Added vPC support and the ability to filter IGMP joins per VLAN for Cisco Nexus 9508 switches with the N9K-X9636C-R, N9K-X9636C-RX, and N9K-X9636Q-R line cards. |
7.0(3)F3(1) |
|
|
MVR |
Introduced this feature for Cisco Nexus 9508 switches with the N9K-X9636C-R, N9K-X9636C-RX, and N9K-X9636Q-R line cards. |
7.0(3)F3(1) |
|
|
PIM ASM and SSM |
Added vPC support for Cisco Nexus 9508 switches with the N9K-X9636C-R, N9K-X9636C-RX, and N9K-X9636Q-R line cards. |
7.0(3)F3(1) |
|
|
IGMP snooping |
Added support for Cisco Nexus 9508 switches with the N9K-X9636C-R and N9K-X9636Q-R line cards. |
7.0(3)F2(1) |
|
|
PIM |
Added PIM ASM and SSM support for Cisco Nexus 9508 switches with the N9K-X9636C-R and N9K-X9636Q-R line cards. |
7.0(3)F2(1) |
|
|
Layer 3 multicast routing |
Added support on FEX ports and FEX port channels for Cisco Nexus 9300-EX platform switches. |
7.0(3)I7(1) |
|
|
Multicast VRF-lite route leaking |
Introduced this feature. |
7.0(3)I7(1) |
|
|
PIM |
Added support for the multicast heavy template and multicast counters for Cisco Nexus 9300-FX Series switches. |
7.0(3)I7(1) |
|
|
PIM |
Added Layer 3 port-channel subinterface support for PIM sparse mode for Cisco Nexus 9300-EX Series switches, Cisco Nexus 3232C and 3264Q switches, and N9K-X9732C-EX, N9K-X9736C-EX, and N9K-X97160YC-EX line cards. |
7.0(3)I6(1) |
|
|
PIM |
Introduced multicast counters for Cisco Nexus 9300-EX Series switches. |
7.0(3)I6(1) |
|
|
PIM |
Added Layer 3 port-channel subinterface support for PIM sparse mode for Cisco Nexus 9300 Series switches. |
7.0(3)I5(2) |
|
|
MLD |
Introduced this feature. |
7.0(3)I5(1) |
|
|
PIM |
Added PIM6 ASM and SSM support. |
7.0(3)I5(1) |
|
|
IGMP snooping |
Added the ip igmp snooping report-flood and ip igmp snooping proxy-leave use-group-address commands. |
7.0(3)I4(2) |
|
|
PIM |
Added PIM SSM support over vPCs. |
7.0(3)I4(1) |
|
|
Multicast heavy template |
Introduced this feature. |
7.0(3)I3(2) |
|
|
IGMP |
Added a limitation for Cisco Nexus 9200 Series switches. |
7.0(3)I3(1) |
|
|
IGMP |
Added support for Source-Specific Multicast (SSM) translation. |
7.0(3)I2(1) |
|
|
PIM |
Added support for the Source-Specific Multicast (SSM) and bidirectional shared trees (Bidir) distribution modes. |
7.0(3)I2(1) |
|
|
PIM |
Added the resilient option to the ip multicast multipath command. |
7.0(3)I1(1) |
Feedback